alistair23-linux/arch/powerpc/kernel/dma-swiotlb.c
Jia Hongtao 688ba1dbee powerpc/swiotlb: Enable at early stage and disable if not necessary
Remove the dependency on PCI initialization for SWIOTLB initialization.
So that PCI can be initialized at proper time.

SWIOTLB is partly determined by PCI inbound/outbound map which is assigned
in PCI initialization. But swiotlb_init() should be done at the stage of
mem_init() which is much earlier than PCI initialization. So we reserve the
memory for SWIOTLB first and free it if not necessary.

All boards are converted to fit this change.

Signed-off-by: Jia Hongtao <B38951@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-09-12 14:57:09 -05:00

128 lines
3.3 KiB
C

/*
* Contains routines needed to support swiotlb for ppc.
*
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
* Author: Becky Bruce
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/dma-mapping.h>
#include <linux/memblock.h>
#include <linux/pfn.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <asm/machdep.h>
#include <asm/swiotlb.h>
#include <asm/dma.h>
unsigned int ppc_swiotlb_enable;
static u64 swiotlb_powerpc_get_required(struct device *dev)
{
u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
end = memblock_end_of_DRAM();
if (max_direct_dma_addr && end > max_direct_dma_addr)
end = max_direct_dma_addr;
end += get_dma_offset(dev);
mask = 1ULL << (fls64(end) - 1);
mask += mask - 1;
return mask;
}
/*
* At the moment, all platforms that use this code only require
* swiotlb to be used if we're operating on HIGHMEM. Since
* we don't ever call anything other than map_sg, unmap_sg,
* map_page, and unmap_page on highmem, use normal dma_ops
* for everything else.
*/
struct dma_map_ops swiotlb_dma_ops = {
.alloc = dma_direct_alloc_coherent,
.free = dma_direct_free_coherent,
.mmap = dma_direct_mmap_coherent,
.map_sg = swiotlb_map_sg_attrs,
.unmap_sg = swiotlb_unmap_sg_attrs,
.dma_supported = swiotlb_dma_supported,
.map_page = swiotlb_map_page,
.unmap_page = swiotlb_unmap_page,
.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
.sync_single_for_device = swiotlb_sync_single_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
.sync_sg_for_device = swiotlb_sync_sg_for_device,
.mapping_error = swiotlb_dma_mapping_error,
.get_required_mask = swiotlb_powerpc_get_required,
};
void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
{
struct pci_controller *hose;
struct dev_archdata *sd;
hose = pci_bus_to_host(pdev->bus);
sd = &pdev->dev.archdata;
sd->max_direct_dma_addr =
hose->dma_window_base_cur + hose->dma_window_size;
}
static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
struct dev_archdata *sd;
/* We are only intereted in device addition */
if (action != BUS_NOTIFY_ADD_DEVICE)
return 0;
sd = &dev->archdata;
sd->max_direct_dma_addr = 0;
/* May need to bounce if the device can't address all of DRAM */
if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
set_dma_ops(dev, &swiotlb_dma_ops);
return NOTIFY_DONE;
}
static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
.notifier_call = ppc_swiotlb_bus_notify,
.priority = 0,
};
int __init swiotlb_setup_bus_notifier(void)
{
bus_register_notifier(&platform_bus_type,
&ppc_swiotlb_plat_bus_notifier);
return 0;
}
void swiotlb_detect_4g(void)
{
if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
ppc_swiotlb_enable = 1;
}
static int __init swiotlb_late_init(void)
{
if (ppc_swiotlb_enable) {
swiotlb_print_info();
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
} else {
swiotlb_free();
}
return 0;
}
subsys_initcall(swiotlb_late_init);