![Taku Izumi](/assets/img/avatar_default.png)
This patch refines messages in pciehp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
296 lines
8.4 KiB
C
296 lines
8.4 KiB
C
/*
|
|
* PCI Express Hot Plug Controller Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include "../pci.h"
|
|
#include "pciehp.h"
|
|
|
|
static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
|
|
{
|
|
u16 pci_cmd, pci_bctl;
|
|
|
|
if (hpp->revision > 1) {
|
|
warn("Rev.%d type0 record not supported\n", hpp->revision);
|
|
return;
|
|
}
|
|
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
|
|
pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
|
|
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
|
|
if (hpp->enable_serr)
|
|
pci_cmd |= PCI_COMMAND_SERR;
|
|
else
|
|
pci_cmd &= ~PCI_COMMAND_SERR;
|
|
if (hpp->enable_perr)
|
|
pci_cmd |= PCI_COMMAND_PARITY;
|
|
else
|
|
pci_cmd &= ~PCI_COMMAND_PARITY;
|
|
pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
|
|
|
|
/* Program bridge control value */
|
|
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
|
|
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
|
|
hpp->latency_timer);
|
|
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
|
|
if (hpp->enable_serr)
|
|
pci_bctl |= PCI_BRIDGE_CTL_SERR;
|
|
else
|
|
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
|
|
if (hpp->enable_perr)
|
|
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
|
|
else
|
|
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
|
|
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
|
|
}
|
|
}
|
|
|
|
static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
|
|
{
|
|
int pos;
|
|
u16 reg16;
|
|
u32 reg32;
|
|
|
|
if (hpp->revision > 1) {
|
|
warn("Rev.%d type2 record not supported\n", hpp->revision);
|
|
return;
|
|
}
|
|
|
|
/* Find PCI Express capability */
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (!pos)
|
|
return;
|
|
|
|
/* Initialize Device Control Register */
|
|
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, ®16);
|
|
reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or;
|
|
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
|
|
|
|
/* Initialize Link Control Register */
|
|
if (dev->subordinate) {
|
|
pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, ®16);
|
|
reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
|
|
| hpp->pci_exp_lnkctl_or;
|
|
pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
|
|
}
|
|
|
|
/* Find Advanced Error Reporting Enhanced Capability */
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (!pos)
|
|
return;
|
|
|
|
/* Initialize Uncorrectable Error Mask Register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32);
|
|
reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
|
|
|
|
/* Initialize Uncorrectable Error Severity Register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32);
|
|
reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
|
|
|
|
/* Initialize Correctable Error Mask Register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32);
|
|
reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
|
|
|
|
/* Initialize Advanced Error Capabilities and Control Register */
|
|
pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32);
|
|
reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
|
|
|
|
/*
|
|
* FIXME: The following two registers are not supported yet.
|
|
*
|
|
* o Secondary Uncorrectable Error Severity Register
|
|
* o Secondary Uncorrectable Error Mask Register
|
|
*/
|
|
}
|
|
|
|
static void program_fw_provided_values(struct pci_dev *dev)
|
|
{
|
|
struct pci_dev *cdev;
|
|
struct hotplug_params hpp;
|
|
|
|
/* Program hpp values for this device */
|
|
if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
|
|
(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
|
|
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
|
|
return;
|
|
|
|
if (pciehp_get_hp_params_from_firmware(dev, &hpp)) {
|
|
warn("Could not get hotplug parameters\n");
|
|
return;
|
|
}
|
|
|
|
if (hpp.t2)
|
|
program_hpp_type2(dev, hpp.t2);
|
|
if (hpp.t0)
|
|
program_hpp_type0(dev, hpp.t0);
|
|
|
|
/* Program child devices */
|
|
if (dev->subordinate) {
|
|
list_for_each_entry(cdev, &dev->subordinate->devices,
|
|
bus_list)
|
|
program_fw_provided_values(cdev);
|
|
}
|
|
}
|
|
|
|
static int __ref pciehp_add_bridge(struct pci_dev *dev)
|
|
{
|
|
struct pci_bus *parent = dev->bus;
|
|
int pass, busnr, start = parent->secondary;
|
|
int end = parent->subordinate;
|
|
|
|
for (busnr = start; busnr <= end; busnr++) {
|
|
if (!pci_find_bus(pci_domain_nr(parent), busnr))
|
|
break;
|
|
}
|
|
if (busnr-- > end) {
|
|
err("No bus number available for hot-added bridge %s\n",
|
|
pci_name(dev));
|
|
return -1;
|
|
}
|
|
for (pass = 0; pass < 2; pass++)
|
|
busnr = pci_scan_bridge(parent, dev, busnr, pass);
|
|
if (!dev->subordinate)
|
|
return -1;
|
|
pci_bus_size_bridges(dev->subordinate);
|
|
pci_bus_assign_resources(parent);
|
|
pci_enable_bridges(parent);
|
|
pci_bus_add_devices(parent);
|
|
return 0;
|
|
}
|
|
|
|
int pciehp_configure_device(struct slot *p_slot)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
|
|
int num, fn;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
|
|
if (dev) {
|
|
ctrl_err(ctrl, "Device %s already exists "
|
|
"at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
|
|
pci_domain_nr(parent), p_slot->bus, p_slot->device);
|
|
pci_dev_put(dev);
|
|
return -EINVAL;
|
|
}
|
|
|
|
num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
|
|
if (num == 0) {
|
|
ctrl_err(ctrl, "No new device found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (fn = 0; fn < 8; fn++) {
|
|
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
|
|
if (!dev)
|
|
continue;
|
|
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
|
|
ctrl_err(ctrl, "Cannot hot-add display device %s\n",
|
|
pci_name(dev));
|
|
pci_dev_put(dev);
|
|
continue;
|
|
}
|
|
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
|
|
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
|
|
pciehp_add_bridge(dev);
|
|
}
|
|
program_fw_provided_values(dev);
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
pci_bus_assign_resources(parent);
|
|
pci_bus_add_devices(parent);
|
|
return 0;
|
|
}
|
|
|
|
int pciehp_unconfigure_device(struct slot *p_slot)
|
|
{
|
|
int ret, rc = 0;
|
|
int j;
|
|
u8 bctl = 0;
|
|
u8 presence = 0;
|
|
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
|
|
u16 command;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
|
|
__func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
|
|
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
|
|
if (ret)
|
|
presence = 0;
|
|
|
|
for (j = 0; j < 8; j++) {
|
|
struct pci_dev* temp = pci_get_slot(parent,
|
|
(p_slot->device << 3) | j);
|
|
if (!temp)
|
|
continue;
|
|
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
|
|
ctrl_err(ctrl, "Cannot remove display device %s\n",
|
|
pci_name(temp));
|
|
pci_dev_put(temp);
|
|
continue;
|
|
}
|
|
if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
|
|
pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
|
|
if (bctl & PCI_BRIDGE_CTL_VGA) {
|
|
ctrl_err(ctrl,
|
|
"Cannot remove display device %s\n",
|
|
pci_name(temp));
|
|
pci_dev_put(temp);
|
|
continue;
|
|
}
|
|
}
|
|
pci_remove_bus_device(temp);
|
|
/*
|
|
* Ensure that no new Requests will be generated from
|
|
* the device.
|
|
*/
|
|
if (presence) {
|
|
pci_read_config_word(temp, PCI_COMMAND, &command);
|
|
command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
|
|
command |= PCI_COMMAND_INTX_DISABLE;
|
|
pci_write_config_word(temp, PCI_COMMAND, command);
|
|
}
|
|
pci_dev_put(temp);
|
|
}
|
|
/*
|
|
* Some PCI Express root ports require fixup after hot-plug operation.
|
|
*/
|
|
if (pcie_mch_quirk)
|
|
pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev);
|
|
|
|
return rc;
|
|
}
|