![Linus Torvalds](/assets/img/avatar_default.png)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
3085 lines
78 KiB
C
3085 lines
78 KiB
C
/*
|
|
* ipmi_si.c
|
|
*
|
|
* The interface to the IPMI driver for the system interfaces (KCS, SMIC,
|
|
* BT).
|
|
*
|
|
* Author: MontaVista Software, Inc.
|
|
* Corey Minyard <minyard@mvista.com>
|
|
* source@mvista.com
|
|
*
|
|
* Copyright 2002 MontaVista Software Inc.
|
|
* Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/*
|
|
* This file holds the "policy" for the interface to the SMI state
|
|
* machine. It does the configuration, handles timers and interrupts,
|
|
* and drives the real SMI state machine.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <asm/system.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/list.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/kthread.h>
|
|
#include <asm/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/rcupdate.h>
|
|
#include <linux/ipmi_smi.h>
|
|
#include <asm/io.h>
|
|
#include "ipmi_si_sm.h"
|
|
#include <linux/init.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ctype.h>
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
#include <asm/of_device.h>
|
|
#include <asm/of_platform.h>
|
|
#endif
|
|
|
|
#define PFX "ipmi_si: "
|
|
|
|
/* Measure times between events in the driver. */
|
|
#undef DEBUG_TIMING
|
|
|
|
/* Call every 10 ms. */
|
|
#define SI_TIMEOUT_TIME_USEC 10000
|
|
#define SI_USEC_PER_JIFFY (1000000/HZ)
|
|
#define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
|
|
#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
|
|
short timeout */
|
|
|
|
/* Bit for BMC global enables. */
|
|
#define IPMI_BMC_RCV_MSG_INTR 0x01
|
|
#define IPMI_BMC_EVT_MSG_INTR 0x02
|
|
#define IPMI_BMC_EVT_MSG_BUFF 0x04
|
|
#define IPMI_BMC_SYS_LOG 0x08
|
|
|
|
enum si_intf_state {
|
|
SI_NORMAL,
|
|
SI_GETTING_FLAGS,
|
|
SI_GETTING_EVENTS,
|
|
SI_CLEARING_FLAGS,
|
|
SI_CLEARING_FLAGS_THEN_SET_IRQ,
|
|
SI_GETTING_MESSAGES,
|
|
SI_ENABLE_INTERRUPTS1,
|
|
SI_ENABLE_INTERRUPTS2,
|
|
SI_DISABLE_INTERRUPTS1,
|
|
SI_DISABLE_INTERRUPTS2
|
|
/* FIXME - add watchdog stuff. */
|
|
};
|
|
|
|
/* Some BT-specific defines we need here. */
|
|
#define IPMI_BT_INTMASK_REG 2
|
|
#define IPMI_BT_INTMASK_CLEAR_IRQ_BIT 2
|
|
#define IPMI_BT_INTMASK_ENABLE_IRQ_BIT 1
|
|
|
|
enum si_type {
|
|
SI_KCS, SI_SMIC, SI_BT
|
|
};
|
|
static char *si_to_str[] = { "kcs", "smic", "bt" };
|
|
|
|
#define DEVICE_NAME "ipmi_si"
|
|
|
|
static struct device_driver ipmi_driver =
|
|
{
|
|
.name = DEVICE_NAME,
|
|
.bus = &platform_bus_type
|
|
};
|
|
|
|
struct smi_info
|
|
{
|
|
int intf_num;
|
|
ipmi_smi_t intf;
|
|
struct si_sm_data *si_sm;
|
|
struct si_sm_handlers *handlers;
|
|
enum si_type si_type;
|
|
spinlock_t si_lock;
|
|
spinlock_t msg_lock;
|
|
struct list_head xmit_msgs;
|
|
struct list_head hp_xmit_msgs;
|
|
struct ipmi_smi_msg *curr_msg;
|
|
enum si_intf_state si_state;
|
|
|
|
/* Used to handle the various types of I/O that can occur with
|
|
IPMI */
|
|
struct si_sm_io io;
|
|
int (*io_setup)(struct smi_info *info);
|
|
void (*io_cleanup)(struct smi_info *info);
|
|
int (*irq_setup)(struct smi_info *info);
|
|
void (*irq_cleanup)(struct smi_info *info);
|
|
unsigned int io_size;
|
|
char *addr_source; /* ACPI, PCI, SMBIOS, hardcode, default. */
|
|
void (*addr_source_cleanup)(struct smi_info *info);
|
|
void *addr_source_data;
|
|
|
|
/* Per-OEM handler, called from handle_flags().
|
|
Returns 1 when handle_flags() needs to be re-run
|
|
or 0 indicating it set si_state itself.
|
|
*/
|
|
int (*oem_data_avail_handler)(struct smi_info *smi_info);
|
|
|
|
/* Flags from the last GET_MSG_FLAGS command, used when an ATTN
|
|
is set to hold the flags until we are done handling everything
|
|
from the flags. */
|
|
#define RECEIVE_MSG_AVAIL 0x01
|
|
#define EVENT_MSG_BUFFER_FULL 0x02
|
|
#define WDT_PRE_TIMEOUT_INT 0x08
|
|
#define OEM0_DATA_AVAIL 0x20
|
|
#define OEM1_DATA_AVAIL 0x40
|
|
#define OEM2_DATA_AVAIL 0x80
|
|
#define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \
|
|
OEM1_DATA_AVAIL | \
|
|
OEM2_DATA_AVAIL)
|
|
unsigned char msg_flags;
|
|
|
|
/* If set to true, this will request events the next time the
|
|
state machine is idle. */
|
|
atomic_t req_events;
|
|
|
|
/* If true, run the state machine to completion on every send
|
|
call. Generally used after a panic to make sure stuff goes
|
|
out. */
|
|
int run_to_completion;
|
|
|
|
/* The I/O port of an SI interface. */
|
|
int port;
|
|
|
|
/* The space between start addresses of the two ports. For
|
|
instance, if the first port is 0xca2 and the spacing is 4, then
|
|
the second port is 0xca6. */
|
|
unsigned int spacing;
|
|
|
|
/* zero if no irq; */
|
|
int irq;
|
|
|
|
/* The timer for this si. */
|
|
struct timer_list si_timer;
|
|
|
|
/* The time (in jiffies) the last timeout occurred at. */
|
|
unsigned long last_timeout_jiffies;
|
|
|
|
/* Used to gracefully stop the timer without race conditions. */
|
|
atomic_t stop_operation;
|
|
|
|
/* The driver will disable interrupts when it gets into a
|
|
situation where it cannot handle messages due to lack of
|
|
memory. Once that situation clears up, it will re-enable
|
|
interrupts. */
|
|
int interrupt_disabled;
|
|
|
|
/* From the get device id response... */
|
|
struct ipmi_device_id device_id;
|
|
|
|
/* Driver model stuff. */
|
|
struct device *dev;
|
|
struct platform_device *pdev;
|
|
|
|
/* True if we allocated the device, false if it came from
|
|
* someplace else (like PCI). */
|
|
int dev_registered;
|
|
|
|
/* Slave address, could be reported from DMI. */
|
|
unsigned char slave_addr;
|
|
|
|
/* Counters and things for the proc filesystem. */
|
|
spinlock_t count_lock;
|
|
unsigned long short_timeouts;
|
|
unsigned long long_timeouts;
|
|
unsigned long timeout_restarts;
|
|
unsigned long idles;
|
|
unsigned long interrupts;
|
|
unsigned long attentions;
|
|
unsigned long flag_fetches;
|
|
unsigned long hosed_count;
|
|
unsigned long complete_transactions;
|
|
unsigned long events;
|
|
unsigned long watchdog_pretimeouts;
|
|
unsigned long incoming_messages;
|
|
|
|
struct task_struct *thread;
|
|
|
|
struct list_head link;
|
|
};
|
|
|
|
#define SI_MAX_PARMS 4
|
|
|
|
static int force_kipmid[SI_MAX_PARMS];
|
|
static int num_force_kipmid;
|
|
|
|
static int unload_when_empty = 1;
|
|
|
|
static int try_smi_init(struct smi_info *smi);
|
|
static void cleanup_one_si(struct smi_info *to_clean);
|
|
|
|
static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
|
|
static int register_xaction_notifier(struct notifier_block * nb)
|
|
{
|
|
return atomic_notifier_chain_register(&xaction_notifier_list, nb);
|
|
}
|
|
|
|
static void deliver_recv_msg(struct smi_info *smi_info,
|
|
struct ipmi_smi_msg *msg)
|
|
{
|
|
/* Deliver the message to the upper layer with the lock
|
|
released. */
|
|
spin_unlock(&(smi_info->si_lock));
|
|
ipmi_smi_msg_received(smi_info->intf, msg);
|
|
spin_lock(&(smi_info->si_lock));
|
|
}
|
|
|
|
static void return_hosed_msg(struct smi_info *smi_info, int cCode)
|
|
{
|
|
struct ipmi_smi_msg *msg = smi_info->curr_msg;
|
|
|
|
if (cCode < 0 || cCode > IPMI_ERR_UNSPECIFIED)
|
|
cCode = IPMI_ERR_UNSPECIFIED;
|
|
/* else use it as is */
|
|
|
|
/* Make it a reponse */
|
|
msg->rsp[0] = msg->data[0] | 4;
|
|
msg->rsp[1] = msg->data[1];
|
|
msg->rsp[2] = cCode;
|
|
msg->rsp_size = 3;
|
|
|
|
smi_info->curr_msg = NULL;
|
|
deliver_recv_msg(smi_info, msg);
|
|
}
|
|
|
|
static enum si_sm_result start_next_msg(struct smi_info *smi_info)
|
|
{
|
|
int rv;
|
|
struct list_head *entry = NULL;
|
|
#ifdef DEBUG_TIMING
|
|
struct timeval t;
|
|
#endif
|
|
|
|
/* No need to save flags, we aleady have interrupts off and we
|
|
already hold the SMI lock. */
|
|
spin_lock(&(smi_info->msg_lock));
|
|
|
|
/* Pick the high priority queue first. */
|
|
if (!list_empty(&(smi_info->hp_xmit_msgs))) {
|
|
entry = smi_info->hp_xmit_msgs.next;
|
|
} else if (!list_empty(&(smi_info->xmit_msgs))) {
|
|
entry = smi_info->xmit_msgs.next;
|
|
}
|
|
|
|
if (!entry) {
|
|
smi_info->curr_msg = NULL;
|
|
rv = SI_SM_IDLE;
|
|
} else {
|
|
int err;
|
|
|
|
list_del(entry);
|
|
smi_info->curr_msg = list_entry(entry,
|
|
struct ipmi_smi_msg,
|
|
link);
|
|
#ifdef DEBUG_TIMING
|
|
do_gettimeofday(&t);
|
|
printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
|
|
#endif
|
|
err = atomic_notifier_call_chain(&xaction_notifier_list,
|
|
0, smi_info);
|
|
if (err & NOTIFY_STOP_MASK) {
|
|
rv = SI_SM_CALL_WITHOUT_DELAY;
|
|
goto out;
|
|
}
|
|
err = smi_info->handlers->start_transaction(
|
|
smi_info->si_sm,
|
|
smi_info->curr_msg->data,
|
|
smi_info->curr_msg->data_size);
|
|
if (err) {
|
|
return_hosed_msg(smi_info, err);
|
|
}
|
|
|
|
rv = SI_SM_CALL_WITHOUT_DELAY;
|
|
}
|
|
out:
|
|
spin_unlock(&(smi_info->msg_lock));
|
|
|
|
return rv;
|
|
}
|
|
|
|
static void start_enable_irq(struct smi_info *smi_info)
|
|
{
|
|
unsigned char msg[2];
|
|
|
|
/* If we are enabling interrupts, we have to tell the
|
|
BMC to use them. */
|
|
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
|
|
|
|
smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
|
|
smi_info->si_state = SI_ENABLE_INTERRUPTS1;
|
|
}
|
|
|
|
static void start_disable_irq(struct smi_info *smi_info)
|
|
{
|
|
unsigned char msg[2];
|
|
|
|
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
|
|
|
|
smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
|
|
smi_info->si_state = SI_DISABLE_INTERRUPTS1;
|
|
}
|
|
|
|
static void start_clear_flags(struct smi_info *smi_info)
|
|
{
|
|
unsigned char msg[3];
|
|
|
|
/* Make sure the watchdog pre-timeout flag is not set at startup. */
|
|
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
|
|
msg[2] = WDT_PRE_TIMEOUT_INT;
|
|
|
|
smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
|
|
smi_info->si_state = SI_CLEARING_FLAGS;
|
|
}
|
|
|
|
/* When we have a situtaion where we run out of memory and cannot
|
|
allocate messages, we just leave them in the BMC and run the system
|
|
polled until we can allocate some memory. Once we have some
|
|
memory, we will re-enable the interrupt. */
|
|
static inline void disable_si_irq(struct smi_info *smi_info)
|
|
{
|
|
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
|
|
start_disable_irq(smi_info);
|
|
smi_info->interrupt_disabled = 1;
|
|
}
|
|
}
|
|
|
|
static inline void enable_si_irq(struct smi_info *smi_info)
|
|
{
|
|
if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
|
|
start_enable_irq(smi_info);
|
|
smi_info->interrupt_disabled = 0;
|
|
}
|
|
}
|
|
|
|
static void handle_flags(struct smi_info *smi_info)
|
|
{
|
|
retry:
|
|
if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
|
|
/* Watchdog pre-timeout */
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->watchdog_pretimeouts++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
start_clear_flags(smi_info);
|
|
smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
|
|
spin_unlock(&(smi_info->si_lock));
|
|
ipmi_smi_watchdog_pretimeout(smi_info->intf);
|
|
spin_lock(&(smi_info->si_lock));
|
|
} else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) {
|
|
/* Messages available. */
|
|
smi_info->curr_msg = ipmi_alloc_smi_msg();
|
|
if (!smi_info->curr_msg) {
|
|
disable_si_irq(smi_info);
|
|
smi_info->si_state = SI_NORMAL;
|
|
return;
|
|
}
|
|
enable_si_irq(smi_info);
|
|
|
|
smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD;
|
|
smi_info->curr_msg->data_size = 2;
|
|
|
|
smi_info->handlers->start_transaction(
|
|
smi_info->si_sm,
|
|
smi_info->curr_msg->data,
|
|
smi_info->curr_msg->data_size);
|
|
smi_info->si_state = SI_GETTING_MESSAGES;
|
|
} else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) {
|
|
/* Events available. */
|
|
smi_info->curr_msg = ipmi_alloc_smi_msg();
|
|
if (!smi_info->curr_msg) {
|
|
disable_si_irq(smi_info);
|
|
smi_info->si_state = SI_NORMAL;
|
|
return;
|
|
}
|
|
enable_si_irq(smi_info);
|
|
|
|
smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
|
|
smi_info->curr_msg->data_size = 2;
|
|
|
|
smi_info->handlers->start_transaction(
|
|
smi_info->si_sm,
|
|
smi_info->curr_msg->data,
|
|
smi_info->curr_msg->data_size);
|
|
smi_info->si_state = SI_GETTING_EVENTS;
|
|
} else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
|
|
smi_info->oem_data_avail_handler) {
|
|
if (smi_info->oem_data_avail_handler(smi_info))
|
|
goto retry;
|
|
} else {
|
|
smi_info->si_state = SI_NORMAL;
|
|
}
|
|
}
|
|
|
|
static void handle_transaction_done(struct smi_info *smi_info)
|
|
{
|
|
struct ipmi_smi_msg *msg;
|
|
#ifdef DEBUG_TIMING
|
|
struct timeval t;
|
|
|
|
do_gettimeofday(&t);
|
|
printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
|
|
#endif
|
|
switch (smi_info->si_state) {
|
|
case SI_NORMAL:
|
|
if (!smi_info->curr_msg)
|
|
break;
|
|
|
|
smi_info->curr_msg->rsp_size
|
|
= smi_info->handlers->get_result(
|
|
smi_info->si_sm,
|
|
smi_info->curr_msg->rsp,
|
|
IPMI_MAX_MSG_LENGTH);
|
|
|
|
/* Do this here becase deliver_recv_msg() releases the
|
|
lock, and a new message can be put in during the
|
|
time the lock is released. */
|
|
msg = smi_info->curr_msg;
|
|
smi_info->curr_msg = NULL;
|
|
deliver_recv_msg(smi_info, msg);
|
|
break;
|
|
|
|
case SI_GETTING_FLAGS:
|
|
{
|
|
unsigned char msg[4];
|
|
unsigned int len;
|
|
|
|
/* We got the flags from the SMI, now handle them. */
|
|
len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
|
|
if (msg[2] != 0) {
|
|
/* Error fetching flags, just give up for
|
|
now. */
|
|
smi_info->si_state = SI_NORMAL;
|
|
} else if (len < 4) {
|
|
/* Hmm, no flags. That's technically illegal, but
|
|
don't use uninitialized data. */
|
|
smi_info->si_state = SI_NORMAL;
|
|
} else {
|
|
smi_info->msg_flags = msg[3];
|
|
handle_flags(smi_info);
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SI_CLEARING_FLAGS:
|
|
case SI_CLEARING_FLAGS_THEN_SET_IRQ:
|
|
{
|
|
unsigned char msg[3];
|
|
|
|
/* We cleared the flags. */
|
|
smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
|
|
if (msg[2] != 0) {
|
|
/* Error clearing flags */
|
|
printk(KERN_WARNING
|
|
"ipmi_si: Error clearing flags: %2.2x\n",
|
|
msg[2]);
|
|
}
|
|
if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ)
|
|
start_enable_irq(smi_info);
|
|
else
|
|
smi_info->si_state = SI_NORMAL;
|
|
break;
|
|
}
|
|
|
|
case SI_GETTING_EVENTS:
|
|
{
|
|
smi_info->curr_msg->rsp_size
|
|
= smi_info->handlers->get_result(
|
|
smi_info->si_sm,
|
|
smi_info->curr_msg->rsp,
|
|
IPMI_MAX_MSG_LENGTH);
|
|
|
|
/* Do this here becase deliver_recv_msg() releases the
|
|
lock, and a new message can be put in during the
|
|
time the lock is released. */
|
|
msg = smi_info->curr_msg;
|
|
smi_info->curr_msg = NULL;
|
|
if (msg->rsp[2] != 0) {
|
|
/* Error getting event, probably done. */
|
|
msg->done(msg);
|
|
|
|
/* Take off the event flag. */
|
|
smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
|
|
handle_flags(smi_info);
|
|
} else {
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->events++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
/* Do this before we deliver the message
|
|
because delivering the message releases the
|
|
lock and something else can mess with the
|
|
state. */
|
|
handle_flags(smi_info);
|
|
|
|
deliver_recv_msg(smi_info, msg);
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SI_GETTING_MESSAGES:
|
|
{
|
|
smi_info->curr_msg->rsp_size
|
|
= smi_info->handlers->get_result(
|
|
smi_info->si_sm,
|
|
smi_info->curr_msg->rsp,
|
|
IPMI_MAX_MSG_LENGTH);
|
|
|
|
/* Do this here becase deliver_recv_msg() releases the
|
|
lock, and a new message can be put in during the
|
|
time the lock is released. */
|
|
msg = smi_info->curr_msg;
|
|
smi_info->curr_msg = NULL;
|
|
if (msg->rsp[2] != 0) {
|
|
/* Error getting event, probably done. */
|
|
msg->done(msg);
|
|
|
|
/* Take off the msg flag. */
|
|
smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
|
|
handle_flags(smi_info);
|
|
} else {
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->incoming_messages++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
/* Do this before we deliver the message
|
|
because delivering the message releases the
|
|
lock and something else can mess with the
|
|
state. */
|
|
handle_flags(smi_info);
|
|
|
|
deliver_recv_msg(smi_info, msg);
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SI_ENABLE_INTERRUPTS1:
|
|
{
|
|
unsigned char msg[4];
|
|
|
|
/* We got the flags from the SMI, now handle them. */
|
|
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
|
|
if (msg[2] != 0) {
|
|
printk(KERN_WARNING
|
|
"ipmi_si: Could not enable interrupts"
|
|
", failed get, using polled mode.\n");
|
|
smi_info->si_state = SI_NORMAL;
|
|
} else {
|
|
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
|
|
msg[2] = (msg[3] |
|
|
IPMI_BMC_RCV_MSG_INTR |
|
|
IPMI_BMC_EVT_MSG_INTR);
|
|
smi_info->handlers->start_transaction(
|
|
smi_info->si_sm, msg, 3);
|
|
smi_info->si_state = SI_ENABLE_INTERRUPTS2;
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SI_ENABLE_INTERRUPTS2:
|
|
{
|
|
unsigned char msg[4];
|
|
|
|
/* We got the flags from the SMI, now handle them. */
|
|
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
|
|
if (msg[2] != 0) {
|
|
printk(KERN_WARNING
|
|
"ipmi_si: Could not enable interrupts"
|
|
", failed set, using polled mode.\n");
|
|
}
|
|
smi_info->si_state = SI_NORMAL;
|
|
break;
|
|
}
|
|
|
|
case SI_DISABLE_INTERRUPTS1:
|
|
{
|
|
unsigned char msg[4];
|
|
|
|
/* We got the flags from the SMI, now handle them. */
|
|
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
|
|
if (msg[2] != 0) {
|
|
printk(KERN_WARNING
|
|
"ipmi_si: Could not disable interrupts"
|
|
", failed get.\n");
|
|
smi_info->si_state = SI_NORMAL;
|
|
} else {
|
|
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
|
|
msg[2] = (msg[3] &
|
|
~(IPMI_BMC_RCV_MSG_INTR |
|
|
IPMI_BMC_EVT_MSG_INTR));
|
|
smi_info->handlers->start_transaction(
|
|
smi_info->si_sm, msg, 3);
|
|
smi_info->si_state = SI_DISABLE_INTERRUPTS2;
|
|
}
|
|
break;
|
|
}
|
|
|
|
case SI_DISABLE_INTERRUPTS2:
|
|
{
|
|
unsigned char msg[4];
|
|
|
|
/* We got the flags from the SMI, now handle them. */
|
|
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
|
|
if (msg[2] != 0) {
|
|
printk(KERN_WARNING
|
|
"ipmi_si: Could not disable interrupts"
|
|
", failed set.\n");
|
|
}
|
|
smi_info->si_state = SI_NORMAL;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Called on timeouts and events. Timeouts should pass the elapsed
|
|
time, interrupts should pass in zero. */
|
|
static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
|
|
int time)
|
|
{
|
|
enum si_sm_result si_sm_result;
|
|
|
|
restart:
|
|
/* There used to be a loop here that waited a little while
|
|
(around 25us) before giving up. That turned out to be
|
|
pointless, the minimum delays I was seeing were in the 300us
|
|
range, which is far too long to wait in an interrupt. So
|
|
we just run until the state machine tells us something
|
|
happened or it needs a delay. */
|
|
si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
|
|
time = 0;
|
|
while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
|
|
{
|
|
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
|
|
}
|
|
|
|
if (si_sm_result == SI_SM_TRANSACTION_COMPLETE)
|
|
{
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->complete_transactions++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
handle_transaction_done(smi_info);
|
|
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
|
|
}
|
|
else if (si_sm_result == SI_SM_HOSED)
|
|
{
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->hosed_count++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
/* Do the before return_hosed_msg, because that
|
|
releases the lock. */
|
|
smi_info->si_state = SI_NORMAL;
|
|
if (smi_info->curr_msg != NULL) {
|
|
/* If we were handling a user message, format
|
|
a response to send to the upper layer to
|
|
tell it about the error. */
|
|
return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
|
|
}
|
|
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
|
|
}
|
|
|
|
/* We prefer handling attn over new messages. */
|
|
if (si_sm_result == SI_SM_ATTN)
|
|
{
|
|
unsigned char msg[2];
|
|
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->attentions++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
/* Got a attn, send down a get message flags to see
|
|
what's causing it. It would be better to handle
|
|
this in the upper layer, but due to the way
|
|
interrupts work with the SMI, that's not really
|
|
possible. */
|
|
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
msg[1] = IPMI_GET_MSG_FLAGS_CMD;
|
|
|
|
smi_info->handlers->start_transaction(
|
|
smi_info->si_sm, msg, 2);
|
|
smi_info->si_state = SI_GETTING_FLAGS;
|
|
goto restart;
|
|
}
|
|
|
|
/* If we are currently idle, try to start the next message. */
|
|
if (si_sm_result == SI_SM_IDLE) {
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->idles++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
si_sm_result = start_next_msg(smi_info);
|
|
if (si_sm_result != SI_SM_IDLE)
|
|
goto restart;
|
|
}
|
|
|
|
if ((si_sm_result == SI_SM_IDLE)
|
|
&& (atomic_read(&smi_info->req_events)))
|
|
{
|
|
/* We are idle and the upper layer requested that I fetch
|
|
events, so do so. */
|
|
atomic_set(&smi_info->req_events, 0);
|
|
|
|
smi_info->curr_msg = ipmi_alloc_smi_msg();
|
|
if (!smi_info->curr_msg)
|
|
goto out;
|
|
|
|
smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
|
|
smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
|
|
smi_info->curr_msg->data_size = 2;
|
|
|
|
smi_info->handlers->start_transaction(
|
|
smi_info->si_sm,
|
|
smi_info->curr_msg->data,
|
|
smi_info->curr_msg->data_size);
|
|
smi_info->si_state = SI_GETTING_EVENTS;
|
|
goto restart;
|
|
}
|
|
out:
|
|
return si_sm_result;
|
|
}
|
|
|
|
static void sender(void *send_info,
|
|
struct ipmi_smi_msg *msg,
|
|
int priority)
|
|
{
|
|
struct smi_info *smi_info = send_info;
|
|
enum si_sm_result result;
|
|
unsigned long flags;
|
|
#ifdef DEBUG_TIMING
|
|
struct timeval t;
|
|
#endif
|
|
|
|
if (atomic_read(&smi_info->stop_operation)) {
|
|
msg->rsp[0] = msg->data[0] | 4;
|
|
msg->rsp[1] = msg->data[1];
|
|
msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
|
|
msg->rsp_size = 3;
|
|
deliver_recv_msg(smi_info, msg);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&(smi_info->msg_lock), flags);
|
|
#ifdef DEBUG_TIMING
|
|
do_gettimeofday(&t);
|
|
printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
|
|
#endif
|
|
|
|
if (smi_info->run_to_completion) {
|
|
/* If we are running to completion, then throw it in
|
|
the list and run transactions until everything is
|
|
clear. Priority doesn't matter here. */
|
|
list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
|
|
|
|
/* We have to release the msg lock and claim the smi
|
|
lock in this case, because of race conditions. */
|
|
spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
|
|
|
|
spin_lock_irqsave(&(smi_info->si_lock), flags);
|
|
result = smi_event_handler(smi_info, 0);
|
|
while (result != SI_SM_IDLE) {
|
|
udelay(SI_SHORT_TIMEOUT_USEC);
|
|
result = smi_event_handler(smi_info,
|
|
SI_SHORT_TIMEOUT_USEC);
|
|
}
|
|
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
|
|
return;
|
|
} else {
|
|
if (priority > 0) {
|
|
list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs));
|
|
} else {
|
|
list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
|
|
|
|
spin_lock_irqsave(&(smi_info->si_lock), flags);
|
|
if ((smi_info->si_state == SI_NORMAL)
|
|
&& (smi_info->curr_msg == NULL))
|
|
{
|
|
start_next_msg(smi_info);
|
|
}
|
|
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
|
|
}
|
|
|
|
static void set_run_to_completion(void *send_info, int i_run_to_completion)
|
|
{
|
|
struct smi_info *smi_info = send_info;
|
|
enum si_sm_result result;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&(smi_info->si_lock), flags);
|
|
|
|
smi_info->run_to_completion = i_run_to_completion;
|
|
if (i_run_to_completion) {
|
|
result = smi_event_handler(smi_info, 0);
|
|
while (result != SI_SM_IDLE) {
|
|
udelay(SI_SHORT_TIMEOUT_USEC);
|
|
result = smi_event_handler(smi_info,
|
|
SI_SHORT_TIMEOUT_USEC);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
|
|
}
|
|
|
|
static int ipmi_thread(void *data)
|
|
{
|
|
struct smi_info *smi_info = data;
|
|
unsigned long flags;
|
|
enum si_sm_result smi_result;
|
|
|
|
set_user_nice(current, 19);
|
|
while (!kthread_should_stop()) {
|
|
spin_lock_irqsave(&(smi_info->si_lock), flags);
|
|
smi_result = smi_event_handler(smi_info, 0);
|
|
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
|
|
if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
|
|
/* do nothing */
|
|
}
|
|
else if (smi_result == SI_SM_CALL_WITH_DELAY)
|
|
schedule();
|
|
else
|
|
schedule_timeout_interruptible(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void poll(void *send_info)
|
|
{
|
|
struct smi_info *smi_info = send_info;
|
|
|
|
/*
|
|
* Make sure there is some delay in the poll loop so we can
|
|
* drive time forward and timeout things.
|
|
*/
|
|
udelay(10);
|
|
smi_event_handler(smi_info, 10);
|
|
}
|
|
|
|
static void request_events(void *send_info)
|
|
{
|
|
struct smi_info *smi_info = send_info;
|
|
|
|
if (atomic_read(&smi_info->stop_operation))
|
|
return;
|
|
|
|
atomic_set(&smi_info->req_events, 1);
|
|
}
|
|
|
|
static int initialized;
|
|
|
|
static void smi_timeout(unsigned long data)
|
|
{
|
|
struct smi_info *smi_info = (struct smi_info *) data;
|
|
enum si_sm_result smi_result;
|
|
unsigned long flags;
|
|
unsigned long jiffies_now;
|
|
long time_diff;
|
|
#ifdef DEBUG_TIMING
|
|
struct timeval t;
|
|
#endif
|
|
|
|
spin_lock_irqsave(&(smi_info->si_lock), flags);
|
|
#ifdef DEBUG_TIMING
|
|
do_gettimeofday(&t);
|
|
printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
|
|
#endif
|
|
jiffies_now = jiffies;
|
|
time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
|
|
* SI_USEC_PER_JIFFY);
|
|
smi_result = smi_event_handler(smi_info, time_diff);
|
|
|
|
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
|
|
|
|
smi_info->last_timeout_jiffies = jiffies_now;
|
|
|
|
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
|
|
/* Running with interrupts, only do long timeouts. */
|
|
smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
|
|
spin_lock_irqsave(&smi_info->count_lock, flags);
|
|
smi_info->long_timeouts++;
|
|
spin_unlock_irqrestore(&smi_info->count_lock, flags);
|
|
goto do_add_timer;
|
|
}
|
|
|
|
/* If the state machine asks for a short delay, then shorten
|
|
the timer timeout. */
|
|
if (smi_result == SI_SM_CALL_WITH_DELAY) {
|
|
spin_lock_irqsave(&smi_info->count_lock, flags);
|
|
smi_info->short_timeouts++;
|
|
spin_unlock_irqrestore(&smi_info->count_lock, flags);
|
|
smi_info->si_timer.expires = jiffies + 1;
|
|
} else {
|
|
spin_lock_irqsave(&smi_info->count_lock, flags);
|
|
smi_info->long_timeouts++;
|
|
spin_unlock_irqrestore(&smi_info->count_lock, flags);
|
|
smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
|
|
}
|
|
|
|
do_add_timer:
|
|
add_timer(&(smi_info->si_timer));
|
|
}
|
|
|
|
static irqreturn_t si_irq_handler(int irq, void *data)
|
|
{
|
|
struct smi_info *smi_info = data;
|
|
unsigned long flags;
|
|
#ifdef DEBUG_TIMING
|
|
struct timeval t;
|
|
#endif
|
|
|
|
spin_lock_irqsave(&(smi_info->si_lock), flags);
|
|
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->interrupts++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
#ifdef DEBUG_TIMING
|
|
do_gettimeofday(&t);
|
|
printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
|
|
#endif
|
|
smi_event_handler(smi_info, 0);
|
|
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t si_bt_irq_handler(int irq, void *data)
|
|
{
|
|
struct smi_info *smi_info = data;
|
|
/* We need to clear the IRQ flag for the BT interface. */
|
|
smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG,
|
|
IPMI_BT_INTMASK_CLEAR_IRQ_BIT
|
|
| IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
|
|
return si_irq_handler(irq, data);
|
|
}
|
|
|
|
static int smi_start_processing(void *send_info,
|
|
ipmi_smi_t intf)
|
|
{
|
|
struct smi_info *new_smi = send_info;
|
|
int enable = 0;
|
|
|
|
new_smi->intf = intf;
|
|
|
|
/* Set up the timer that drives the interface. */
|
|
setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
|
|
new_smi->last_timeout_jiffies = jiffies;
|
|
mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
|
|
|
|
/*
|
|
* Check if the user forcefully enabled the daemon.
|
|
*/
|
|
if (new_smi->intf_num < num_force_kipmid)
|
|
enable = force_kipmid[new_smi->intf_num];
|
|
/*
|
|
* The BT interface is efficient enough to not need a thread,
|
|
* and there is no need for a thread if we have interrupts.
|
|
*/
|
|
else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
|
|
enable = 1;
|
|
|
|
if (enable) {
|
|
new_smi->thread = kthread_run(ipmi_thread, new_smi,
|
|
"kipmi%d", new_smi->intf_num);
|
|
if (IS_ERR(new_smi->thread)) {
|
|
printk(KERN_NOTICE "ipmi_si_intf: Could not start"
|
|
" kernel thread due to error %ld, only using"
|
|
" timers to drive the interface\n",
|
|
PTR_ERR(new_smi->thread));
|
|
new_smi->thread = NULL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_maintenance_mode(void *send_info, int enable)
|
|
{
|
|
struct smi_info *smi_info = send_info;
|
|
|
|
if (!enable)
|
|
atomic_set(&smi_info->req_events, 0);
|
|
}
|
|
|
|
static struct ipmi_smi_handlers handlers =
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.start_processing = smi_start_processing,
|
|
.sender = sender,
|
|
.request_events = request_events,
|
|
.set_maintenance_mode = set_maintenance_mode,
|
|
.set_run_to_completion = set_run_to_completion,
|
|
.poll = poll,
|
|
};
|
|
|
|
/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
|
|
a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */
|
|
|
|
static LIST_HEAD(smi_infos);
|
|
static DEFINE_MUTEX(smi_infos_lock);
|
|
static int smi_num; /* Used to sequence the SMIs */
|
|
|
|
#define DEFAULT_REGSPACING 1
|
|
#define DEFAULT_REGSIZE 1
|
|
|
|
static int si_trydefaults = 1;
|
|
static char *si_type[SI_MAX_PARMS];
|
|
#define MAX_SI_TYPE_STR 30
|
|
static char si_type_str[MAX_SI_TYPE_STR];
|
|
static unsigned long addrs[SI_MAX_PARMS];
|
|
static int num_addrs;
|
|
static unsigned int ports[SI_MAX_PARMS];
|
|
static int num_ports;
|
|
static int irqs[SI_MAX_PARMS];
|
|
static int num_irqs;
|
|
static int regspacings[SI_MAX_PARMS];
|
|
static int num_regspacings;
|
|
static int regsizes[SI_MAX_PARMS];
|
|
static int num_regsizes;
|
|
static int regshifts[SI_MAX_PARMS];
|
|
static int num_regshifts;
|
|
static int slave_addrs[SI_MAX_PARMS];
|
|
static int num_slave_addrs;
|
|
|
|
#define IPMI_IO_ADDR_SPACE 0
|
|
#define IPMI_MEM_ADDR_SPACE 1
|
|
static char *addr_space_to_str[] = { "i/o", "mem" };
|
|
|
|
static int hotmod_handler(const char *val, struct kernel_param *kp);
|
|
|
|
module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200);
|
|
MODULE_PARM_DESC(hotmod, "Add and remove interfaces. See"
|
|
" Documentation/IPMI.txt in the kernel sources for the"
|
|
" gory details.");
|
|
|
|
module_param_named(trydefaults, si_trydefaults, bool, 0);
|
|
MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the"
|
|
" default scan of the KCS and SMIC interface at the standard"
|
|
" address");
|
|
module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
|
|
MODULE_PARM_DESC(type, "Defines the type of each interface, each"
|
|
" interface separated by commas. The types are 'kcs',"
|
|
" 'smic', and 'bt'. For example si_type=kcs,bt will set"
|
|
" the first interface to kcs and the second to bt");
|
|
module_param_array(addrs, long, &num_addrs, 0);
|
|
MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
|
|
" addresses separated by commas. Only use if an interface"
|
|
" is in memory. Otherwise, set it to zero or leave"
|
|
" it blank.");
|
|
module_param_array(ports, int, &num_ports, 0);
|
|
MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
|
|
" addresses separated by commas. Only use if an interface"
|
|
" is a port. Otherwise, set it to zero or leave"
|
|
" it blank.");
|
|
module_param_array(irqs, int, &num_irqs, 0);
|
|
MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
|
|
" addresses separated by commas. Only use if an interface"
|
|
" has an interrupt. Otherwise, set it to zero or leave"
|
|
" it blank.");
|
|
module_param_array(regspacings, int, &num_regspacings, 0);
|
|
MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
|
|
" and each successive register used by the interface. For"
|
|
" instance, if the start address is 0xca2 and the spacing"
|
|
" is 2, then the second address is at 0xca4. Defaults"
|
|
" to 1.");
|
|
module_param_array(regsizes, int, &num_regsizes, 0);
|
|
MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
|
|
" This should generally be 1, 2, 4, or 8 for an 8-bit,"
|
|
" 16-bit, 32-bit, or 64-bit register. Use this if you"
|
|
" the 8-bit IPMI register has to be read from a larger"
|
|
" register.");
|
|
module_param_array(regshifts, int, &num_regshifts, 0);
|
|
MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
|
|
" IPMI register, in bits. For instance, if the data"
|
|
" is read from a 32-bit word and the IPMI data is in"
|
|
" bit 8-15, then the shift would be 8");
|
|
module_param_array(slave_addrs, int, &num_slave_addrs, 0);
|
|
MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
|
|
" the controller. Normally this is 0x20, but can be"
|
|
" overridden by this parm. This is an array indexed"
|
|
" by interface number.");
|
|
module_param_array(force_kipmid, int, &num_force_kipmid, 0);
|
|
MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
|
|
" disabled(0). Normally the IPMI driver auto-detects"
|
|
" this, but the value may be overridden by this parm.");
|
|
module_param(unload_when_empty, int, 0);
|
|
MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
|
|
" specified or found, default is 1. Setting to 0"
|
|
" is useful for hot add of devices using hotmod.");
|
|
|
|
|
|
static void std_irq_cleanup(struct smi_info *info)
|
|
{
|
|
if (info->si_type == SI_BT)
|
|
/* Disable the interrupt in the BT interface. */
|
|
info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
|
|
free_irq(info->irq, info);
|
|
}
|
|
|
|
static int std_irq_setup(struct smi_info *info)
|
|
{
|
|
int rv;
|
|
|
|
if (!info->irq)
|
|
return 0;
|
|
|
|
if (info->si_type == SI_BT) {
|
|
rv = request_irq(info->irq,
|
|
si_bt_irq_handler,
|
|
IRQF_SHARED | IRQF_DISABLED,
|
|
DEVICE_NAME,
|
|
info);
|
|
if (!rv)
|
|
/* Enable the interrupt in the BT interface. */
|
|
info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
|
|
IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
|
|
} else
|
|
rv = request_irq(info->irq,
|
|
si_irq_handler,
|
|
IRQF_SHARED | IRQF_DISABLED,
|
|
DEVICE_NAME,
|
|
info);
|
|
if (rv) {
|
|
printk(KERN_WARNING
|
|
"ipmi_si: %s unable to claim interrupt %d,"
|
|
" running polled\n",
|
|
DEVICE_NAME, info->irq);
|
|
info->irq = 0;
|
|
} else {
|
|
info->irq_cleanup = std_irq_cleanup;
|
|
printk(" Using irq %d\n", info->irq);
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
static unsigned char port_inb(struct si_sm_io *io, unsigned int offset)
|
|
{
|
|
unsigned int addr = io->addr_data;
|
|
|
|
return inb(addr + (offset * io->regspacing));
|
|
}
|
|
|
|
static void port_outb(struct si_sm_io *io, unsigned int offset,
|
|
unsigned char b)
|
|
{
|
|
unsigned int addr = io->addr_data;
|
|
|
|
outb(b, addr + (offset * io->regspacing));
|
|
}
|
|
|
|
static unsigned char port_inw(struct si_sm_io *io, unsigned int offset)
|
|
{
|
|
unsigned int addr = io->addr_data;
|
|
|
|
return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
|
|
}
|
|
|
|
static void port_outw(struct si_sm_io *io, unsigned int offset,
|
|
unsigned char b)
|
|
{
|
|
unsigned int addr = io->addr_data;
|
|
|
|
outw(b << io->regshift, addr + (offset * io->regspacing));
|
|
}
|
|
|
|
static unsigned char port_inl(struct si_sm_io *io, unsigned int offset)
|
|
{
|
|
unsigned int addr = io->addr_data;
|
|
|
|
return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
|
|
}
|
|
|
|
static void port_outl(struct si_sm_io *io, unsigned int offset,
|
|
unsigned char b)
|
|
{
|
|
unsigned int addr = io->addr_data;
|
|
|
|
outl(b << io->regshift, addr+(offset * io->regspacing));
|
|
}
|
|
|
|
static void port_cleanup(struct smi_info *info)
|
|
{
|
|
unsigned int addr = info->io.addr_data;
|
|
int idx;
|
|
|
|
if (addr) {
|
|
for (idx = 0; idx < info->io_size; idx++) {
|
|
release_region(addr + idx * info->io.regspacing,
|
|
info->io.regsize);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int port_setup(struct smi_info *info)
|
|
{
|
|
unsigned int addr = info->io.addr_data;
|
|
int idx;
|
|
|
|
if (!addr)
|
|
return -ENODEV;
|
|
|
|
info->io_cleanup = port_cleanup;
|
|
|
|
/* Figure out the actual inb/inw/inl/etc routine to use based
|
|
upon the register size. */
|
|
switch (info->io.regsize) {
|
|
case 1:
|
|
info->io.inputb = port_inb;
|
|
info->io.outputb = port_outb;
|
|
break;
|
|
case 2:
|
|
info->io.inputb = port_inw;
|
|
info->io.outputb = port_outw;
|
|
break;
|
|
case 4:
|
|
info->io.inputb = port_inl;
|
|
info->io.outputb = port_outl;
|
|
break;
|
|
default:
|
|
printk("ipmi_si: Invalid register size: %d\n",
|
|
info->io.regsize);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Some BIOSes reserve disjoint I/O regions in their ACPI
|
|
* tables. This causes problems when trying to register the
|
|
* entire I/O region. Therefore we must register each I/O
|
|
* port separately.
|
|
*/
|
|
for (idx = 0; idx < info->io_size; idx++) {
|
|
if (request_region(addr + idx * info->io.regspacing,
|
|
info->io.regsize, DEVICE_NAME) == NULL) {
|
|
/* Undo allocations */
|
|
while (idx--) {
|
|
release_region(addr + idx * info->io.regspacing,
|
|
info->io.regsize);
|
|
}
|
|
return -EIO;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset)
|
|
{
|
|
return readb((io->addr)+(offset * io->regspacing));
|
|
}
|
|
|
|
static void intf_mem_outb(struct si_sm_io *io, unsigned int offset,
|
|
unsigned char b)
|
|
{
|
|
writeb(b, (io->addr)+(offset * io->regspacing));
|
|
}
|
|
|
|
static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
|
|
{
|
|
return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
|
|
& 0xff;
|
|
}
|
|
|
|
static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
|
|
unsigned char b)
|
|
{
|
|
writeb(b << io->regshift, (io->addr)+(offset * io->regspacing));
|
|
}
|
|
|
|
static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
|
|
{
|
|
return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
|
|
& 0xff;
|
|
}
|
|
|
|
static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
|
|
unsigned char b)
|
|
{
|
|
writel(b << io->regshift, (io->addr)+(offset * io->regspacing));
|
|
}
|
|
|
|
#ifdef readq
|
|
static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset)
|
|
{
|
|
return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift)
|
|
& 0xff;
|
|
}
|
|
|
|
static void mem_outq(struct si_sm_io *io, unsigned int offset,
|
|
unsigned char b)
|
|
{
|
|
writeq(b << io->regshift, (io->addr)+(offset * io->regspacing));
|
|
}
|
|
#endif
|
|
|
|
static void mem_cleanup(struct smi_info *info)
|
|
{
|
|
unsigned long addr = info->io.addr_data;
|
|
int mapsize;
|
|
|
|
if (info->io.addr) {
|
|
iounmap(info->io.addr);
|
|
|
|
mapsize = ((info->io_size * info->io.regspacing)
|
|
- (info->io.regspacing - info->io.regsize));
|
|
|
|
release_mem_region(addr, mapsize);
|
|
}
|
|
}
|
|
|
|
static int mem_setup(struct smi_info *info)
|
|
{
|
|
unsigned long addr = info->io.addr_data;
|
|
int mapsize;
|
|
|
|
if (!addr)
|
|
return -ENODEV;
|
|
|
|
info->io_cleanup = mem_cleanup;
|
|
|
|
/* Figure out the actual readb/readw/readl/etc routine to use based
|
|
upon the register size. */
|
|
switch (info->io.regsize) {
|
|
case 1:
|
|
info->io.inputb = intf_mem_inb;
|
|
info->io.outputb = intf_mem_outb;
|
|
break;
|
|
case 2:
|
|
info->io.inputb = intf_mem_inw;
|
|
info->io.outputb = intf_mem_outw;
|
|
break;
|
|
case 4:
|
|
info->io.inputb = intf_mem_inl;
|
|
info->io.outputb = intf_mem_outl;
|
|
break;
|
|
#ifdef readq
|
|
case 8:
|
|
info->io.inputb = mem_inq;
|
|
info->io.outputb = mem_outq;
|
|
break;
|
|
#endif
|
|
default:
|
|
printk("ipmi_si: Invalid register size: %d\n",
|
|
info->io.regsize);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Calculate the total amount of memory to claim. This is an
|
|
* unusual looking calculation, but it avoids claiming any
|
|
* more memory than it has to. It will claim everything
|
|
* between the first address to the end of the last full
|
|
* register. */
|
|
mapsize = ((info->io_size * info->io.regspacing)
|
|
- (info->io.regspacing - info->io.regsize));
|
|
|
|
if (request_mem_region(addr, mapsize, DEVICE_NAME) == NULL)
|
|
return -EIO;
|
|
|
|
info->io.addr = ioremap(addr, mapsize);
|
|
if (info->io.addr == NULL) {
|
|
release_mem_region(addr, mapsize);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Parms come in as <op1>[:op2[:op3...]]. ops are:
|
|
* add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
|
|
* Options are:
|
|
* rsp=<regspacing>
|
|
* rsi=<regsize>
|
|
* rsh=<regshift>
|
|
* irq=<irq>
|
|
* ipmb=<ipmb addr>
|
|
*/
|
|
enum hotmod_op { HM_ADD, HM_REMOVE };
|
|
struct hotmod_vals {
|
|
char *name;
|
|
int val;
|
|
};
|
|
static struct hotmod_vals hotmod_ops[] = {
|
|
{ "add", HM_ADD },
|
|
{ "remove", HM_REMOVE },
|
|
{ NULL }
|
|
};
|
|
static struct hotmod_vals hotmod_si[] = {
|
|
{ "kcs", SI_KCS },
|
|
{ "smic", SI_SMIC },
|
|
{ "bt", SI_BT },
|
|
{ NULL }
|
|
};
|
|
static struct hotmod_vals hotmod_as[] = {
|
|
{ "mem", IPMI_MEM_ADDR_SPACE },
|
|
{ "i/o", IPMI_IO_ADDR_SPACE },
|
|
{ NULL }
|
|
};
|
|
|
|
static int parse_str(struct hotmod_vals *v, int *val, char *name, char **curr)
|
|
{
|
|
char *s;
|
|
int i;
|
|
|
|
s = strchr(*curr, ',');
|
|
if (!s) {
|
|
printk(KERN_WARNING PFX "No hotmod %s given.\n", name);
|
|
return -EINVAL;
|
|
}
|
|
*s = '\0';
|
|
s++;
|
|
for (i = 0; hotmod_ops[i].name; i++) {
|
|
if (strcmp(*curr, v[i].name) == 0) {
|
|
*val = v[i].val;
|
|
*curr = s;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
printk(KERN_WARNING PFX "Invalid hotmod %s '%s'\n", name, *curr);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int check_hotmod_int_op(const char *curr, const char *option,
|
|
const char *name, int *val)
|
|
{
|
|
char *n;
|
|
|
|
if (strcmp(curr, name) == 0) {
|
|
if (!option) {
|
|
printk(KERN_WARNING PFX
|
|
"No option given for '%s'\n",
|
|
curr);
|
|
return -EINVAL;
|
|
}
|
|
*val = simple_strtoul(option, &n, 0);
|
|
if ((*n != '\0') || (*option == '\0')) {
|
|
printk(KERN_WARNING PFX
|
|
"Bad option given for '%s'\n",
|
|
curr);
|
|
return -EINVAL;
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int hotmod_handler(const char *val, struct kernel_param *kp)
|
|
{
|
|
char *str = kstrdup(val, GFP_KERNEL);
|
|
int rv;
|
|
char *next, *curr, *s, *n, *o;
|
|
enum hotmod_op op;
|
|
enum si_type si_type;
|
|
int addr_space;
|
|
unsigned long addr;
|
|
int regspacing;
|
|
int regsize;
|
|
int regshift;
|
|
int irq;
|
|
int ipmb;
|
|
int ival;
|
|
int len;
|
|
struct smi_info *info;
|
|
|
|
if (!str)
|
|
return -ENOMEM;
|
|
|
|
/* Kill any trailing spaces, as we can get a "\n" from echo. */
|
|
len = strlen(str);
|
|
ival = len - 1;
|
|
while ((ival >= 0) && isspace(str[ival])) {
|
|
str[ival] = '\0';
|
|
ival--;
|
|
}
|
|
|
|
for (curr = str; curr; curr = next) {
|
|
regspacing = 1;
|
|
regsize = 1;
|
|
regshift = 0;
|
|
irq = 0;
|
|
ipmb = 0x20;
|
|
|
|
next = strchr(curr, ':');
|
|
if (next) {
|
|
*next = '\0';
|
|
next++;
|
|
}
|
|
|
|
rv = parse_str(hotmod_ops, &ival, "operation", &curr);
|
|
if (rv)
|
|
break;
|
|
op = ival;
|
|
|
|
rv = parse_str(hotmod_si, &ival, "interface type", &curr);
|
|
if (rv)
|
|
break;
|
|
si_type = ival;
|
|
|
|
rv = parse_str(hotmod_as, &addr_space, "address space", &curr);
|
|
if (rv)
|
|
break;
|
|
|
|
s = strchr(curr, ',');
|
|
if (s) {
|
|
*s = '\0';
|
|
s++;
|
|
}
|
|
addr = simple_strtoul(curr, &n, 0);
|
|
if ((*n != '\0') || (*curr == '\0')) {
|
|
printk(KERN_WARNING PFX "Invalid hotmod address"
|
|
" '%s'\n", curr);
|
|
break;
|
|
}
|
|
|
|
while (s) {
|
|
curr = s;
|
|
s = strchr(curr, ',');
|
|
if (s) {
|
|
*s = '\0';
|
|
s++;
|
|
}
|
|
o = strchr(curr, '=');
|
|
if (o) {
|
|
*o = '\0';
|
|
o++;
|
|
}
|
|
rv = check_hotmod_int_op(curr, o, "rsp", ®spacing);
|
|
if (rv < 0)
|
|
goto out;
|
|
else if (rv)
|
|
continue;
|
|
rv = check_hotmod_int_op(curr, o, "rsi", ®size);
|
|
if (rv < 0)
|
|
goto out;
|
|
else if (rv)
|
|
continue;
|
|
rv = check_hotmod_int_op(curr, o, "rsh", ®shift);
|
|
if (rv < 0)
|
|
goto out;
|
|
else if (rv)
|
|
continue;
|
|
rv = check_hotmod_int_op(curr, o, "irq", &irq);
|
|
if (rv < 0)
|
|
goto out;
|
|
else if (rv)
|
|
continue;
|
|
rv = check_hotmod_int_op(curr, o, "ipmb", &ipmb);
|
|
if (rv < 0)
|
|
goto out;
|
|
else if (rv)
|
|
continue;
|
|
|
|
rv = -EINVAL;
|
|
printk(KERN_WARNING PFX
|
|
"Invalid hotmod option '%s'\n",
|
|
curr);
|
|
goto out;
|
|
}
|
|
|
|
if (op == HM_ADD) {
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
rv = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
info->addr_source = "hotmod";
|
|
info->si_type = si_type;
|
|
info->io.addr_data = addr;
|
|
info->io.addr_type = addr_space;
|
|
if (addr_space == IPMI_MEM_ADDR_SPACE)
|
|
info->io_setup = mem_setup;
|
|
else
|
|
info->io_setup = port_setup;
|
|
|
|
info->io.addr = NULL;
|
|
info->io.regspacing = regspacing;
|
|
if (!info->io.regspacing)
|
|
info->io.regspacing = DEFAULT_REGSPACING;
|
|
info->io.regsize = regsize;
|
|
if (!info->io.regsize)
|
|
info->io.regsize = DEFAULT_REGSPACING;
|
|
info->io.regshift = regshift;
|
|
info->irq = irq;
|
|
if (info->irq)
|
|
info->irq_setup = std_irq_setup;
|
|
info->slave_addr = ipmb;
|
|
|
|
try_smi_init(info);
|
|
} else {
|
|
/* remove */
|
|
struct smi_info *e, *tmp_e;
|
|
|
|
mutex_lock(&smi_infos_lock);
|
|
list_for_each_entry_safe(e, tmp_e, &smi_infos, link) {
|
|
if (e->io.addr_type != addr_space)
|
|
continue;
|
|
if (e->si_type != si_type)
|
|
continue;
|
|
if (e->io.addr_data == addr)
|
|
cleanup_one_si(e);
|
|
}
|
|
mutex_unlock(&smi_infos_lock);
|
|
}
|
|
}
|
|
rv = len;
|
|
out:
|
|
kfree(str);
|
|
return rv;
|
|
}
|
|
|
|
static __devinit void hardcode_find_bmc(void)
|
|
{
|
|
int i;
|
|
struct smi_info *info;
|
|
|
|
for (i = 0; i < SI_MAX_PARMS; i++) {
|
|
if (!ports[i] && !addrs[i])
|
|
continue;
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return;
|
|
|
|
info->addr_source = "hardcoded";
|
|
|
|
if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
|
|
info->si_type = SI_KCS;
|
|
} else if (strcmp(si_type[i], "smic") == 0) {
|
|
info->si_type = SI_SMIC;
|
|
} else if (strcmp(si_type[i], "bt") == 0) {
|
|
info->si_type = SI_BT;
|
|
} else {
|
|
printk(KERN_WARNING
|
|
"ipmi_si: Interface type specified "
|
|
"for interface %d, was invalid: %s\n",
|
|
i, si_type[i]);
|
|
kfree(info);
|
|
continue;
|
|
}
|
|
|
|
if (ports[i]) {
|
|
/* An I/O port */
|
|
info->io_setup = port_setup;
|
|
info->io.addr_data = ports[i];
|
|
info->io.addr_type = IPMI_IO_ADDR_SPACE;
|
|
} else if (addrs[i]) {
|
|
/* A memory port */
|
|
info->io_setup = mem_setup;
|
|
info->io.addr_data = addrs[i];
|
|
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
|
|
} else {
|
|
printk(KERN_WARNING
|
|
"ipmi_si: Interface type specified "
|
|
"for interface %d, "
|
|
"but port and address were not set or "
|
|
"set to zero.\n", i);
|
|
kfree(info);
|
|
continue;
|
|
}
|
|
|
|
info->io.addr = NULL;
|
|
info->io.regspacing = regspacings[i];
|
|
if (!info->io.regspacing)
|
|
info->io.regspacing = DEFAULT_REGSPACING;
|
|
info->io.regsize = regsizes[i];
|
|
if (!info->io.regsize)
|
|
info->io.regsize = DEFAULT_REGSPACING;
|
|
info->io.regshift = regshifts[i];
|
|
info->irq = irqs[i];
|
|
if (info->irq)
|
|
info->irq_setup = std_irq_setup;
|
|
|
|
try_smi_init(info);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
|
|
#include <linux/acpi.h>
|
|
|
|
/* Once we get an ACPI failure, we don't try any more, because we go
|
|
through the tables sequentially. Once we don't find a table, there
|
|
are no more. */
|
|
static int acpi_failure;
|
|
|
|
/* For GPE-type interrupts. */
|
|
static u32 ipmi_acpi_gpe(void *context)
|
|
{
|
|
struct smi_info *smi_info = context;
|
|
unsigned long flags;
|
|
#ifdef DEBUG_TIMING
|
|
struct timeval t;
|
|
#endif
|
|
|
|
spin_lock_irqsave(&(smi_info->si_lock), flags);
|
|
|
|
spin_lock(&smi_info->count_lock);
|
|
smi_info->interrupts++;
|
|
spin_unlock(&smi_info->count_lock);
|
|
|
|
#ifdef DEBUG_TIMING
|
|
do_gettimeofday(&t);
|
|
printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
|
|
#endif
|
|
smi_event_handler(smi_info, 0);
|
|
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
|
|
|
|
return ACPI_INTERRUPT_HANDLED;
|
|
}
|
|
|
|
static void acpi_gpe_irq_cleanup(struct smi_info *info)
|
|
{
|
|
if (!info->irq)
|
|
return;
|
|
|
|
acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
|
|
}
|
|
|
|
static int acpi_gpe_irq_setup(struct smi_info *info)
|
|
{
|
|
acpi_status status;
|
|
|
|
if (!info->irq)
|
|
return 0;
|
|
|
|
/* FIXME - is level triggered right? */
|
|
status = acpi_install_gpe_handler(NULL,
|
|
info->irq,
|
|
ACPI_GPE_LEVEL_TRIGGERED,
|
|
&ipmi_acpi_gpe,
|
|
info);
|
|
if (status != AE_OK) {
|
|
printk(KERN_WARNING
|
|
"ipmi_si: %s unable to claim ACPI GPE %d,"
|
|
" running polled\n",
|
|
DEVICE_NAME, info->irq);
|
|
info->irq = 0;
|
|
return -EINVAL;
|
|
} else {
|
|
info->irq_cleanup = acpi_gpe_irq_cleanup;
|
|
printk(" Using ACPI GPE %d\n", info->irq);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Defined at
|
|
* http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
|
|
*/
|
|
struct SPMITable {
|
|
s8 Signature[4];
|
|
u32 Length;
|
|
u8 Revision;
|
|
u8 Checksum;
|
|
s8 OEMID[6];
|
|
s8 OEMTableID[8];
|
|
s8 OEMRevision[4];
|
|
s8 CreatorID[4];
|
|
s8 CreatorRevision[4];
|
|
u8 InterfaceType;
|
|
u8 IPMIlegacy;
|
|
s16 SpecificationRevision;
|
|
|
|
/*
|
|
* Bit 0 - SCI interrupt supported
|
|
* Bit 1 - I/O APIC/SAPIC
|
|
*/
|
|
u8 InterruptType;
|
|
|
|
/* If bit 0 of InterruptType is set, then this is the SCI
|
|
interrupt in the GPEx_STS register. */
|
|
u8 GPE;
|
|
|
|
s16 Reserved;
|
|
|
|
/* If bit 1 of InterruptType is set, then this is the I/O
|
|
APIC/SAPIC interrupt. */
|
|
u32 GlobalSystemInterrupt;
|
|
|
|
/* The actual register address. */
|
|
struct acpi_generic_address addr;
|
|
|
|
u8 UID[4];
|
|
|
|
s8 spmi_id[1]; /* A '\0' terminated array starts here. */
|
|
};
|
|
|
|
static __devinit int try_init_acpi(struct SPMITable *spmi)
|
|
{
|
|
struct smi_info *info;
|
|
u8 addr_space;
|
|
|
|
if (spmi->IPMIlegacy != 1) {
|
|
printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
|
|
addr_space = IPMI_MEM_ADDR_SPACE;
|
|
else
|
|
addr_space = IPMI_IO_ADDR_SPACE;
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info->addr_source = "ACPI";
|
|
|
|
/* Figure out the interface type. */
|
|
switch (spmi->InterfaceType)
|
|
{
|
|
case 1: /* KCS */
|
|
info->si_type = SI_KCS;
|
|
break;
|
|
case 2: /* SMIC */
|
|
info->si_type = SI_SMIC;
|
|
break;
|
|
case 3: /* BT */
|
|
info->si_type = SI_BT;
|
|
break;
|
|
default:
|
|
printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n",
|
|
spmi->InterfaceType);
|
|
kfree(info);
|
|
return -EIO;
|
|
}
|
|
|
|
if (spmi->InterruptType & 1) {
|
|
/* We've got a GPE interrupt. */
|
|
info->irq = spmi->GPE;
|
|
info->irq_setup = acpi_gpe_irq_setup;
|
|
} else if (spmi->InterruptType & 2) {
|
|
/* We've got an APIC/SAPIC interrupt. */
|
|
info->irq = spmi->GlobalSystemInterrupt;
|
|
info->irq_setup = std_irq_setup;
|
|
} else {
|
|
/* Use the default interrupt setting. */
|
|
info->irq = 0;
|
|
info->irq_setup = NULL;
|
|
}
|
|
|
|
if (spmi->addr.bit_width) {
|
|
/* A (hopefully) properly formed register bit width. */
|
|
info->io.regspacing = spmi->addr.bit_width / 8;
|
|
} else {
|
|
info->io.regspacing = DEFAULT_REGSPACING;
|
|
}
|
|
info->io.regsize = info->io.regspacing;
|
|
info->io.regshift = spmi->addr.bit_offset;
|
|
|
|
if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
|
|
info->io_setup = mem_setup;
|
|
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
|
|
} else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
|
|
info->io_setup = port_setup;
|
|
info->io.addr_type = IPMI_IO_ADDR_SPACE;
|
|
} else {
|
|
kfree(info);
|
|
printk("ipmi_si: Unknown ACPI I/O Address type\n");
|
|
return -EIO;
|
|
}
|
|
info->io.addr_data = spmi->addr.address;
|
|
|
|
try_smi_init(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __devinit void acpi_find_bmc(void)
|
|
{
|
|
acpi_status status;
|
|
struct SPMITable *spmi;
|
|
int i;
|
|
|
|
if (acpi_disabled)
|
|
return;
|
|
|
|
if (acpi_failure)
|
|
return;
|
|
|
|
for (i = 0; ; i++) {
|
|
status = acpi_get_table(ACPI_SIG_SPMI, i+1,
|
|
(struct acpi_table_header **)&spmi);
|
|
if (status != AE_OK)
|
|
return;
|
|
|
|
try_init_acpi(spmi);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DMI
|
|
struct dmi_ipmi_data
|
|
{
|
|
u8 type;
|
|
u8 addr_space;
|
|
unsigned long base_addr;
|
|
u8 irq;
|
|
u8 offset;
|
|
u8 slave_addr;
|
|
};
|
|
|
|
static int __devinit decode_dmi(const struct dmi_header *dm,
|
|
struct dmi_ipmi_data *dmi)
|
|
{
|
|
const u8 *data = (const u8 *)dm;
|
|
unsigned long base_addr;
|
|
u8 reg_spacing;
|
|
u8 len = dm->length;
|
|
|
|
dmi->type = data[4];
|
|
|
|
memcpy(&base_addr, data+8, sizeof(unsigned long));
|
|
if (len >= 0x11) {
|
|
if (base_addr & 1) {
|
|
/* I/O */
|
|
base_addr &= 0xFFFE;
|
|
dmi->addr_space = IPMI_IO_ADDR_SPACE;
|
|
}
|
|
else {
|
|
/* Memory */
|
|
dmi->addr_space = IPMI_MEM_ADDR_SPACE;
|
|
}
|
|
/* If bit 4 of byte 0x10 is set, then the lsb for the address
|
|
is odd. */
|
|
dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
|
|
|
|
dmi->irq = data[0x11];
|
|
|
|
/* The top two bits of byte 0x10 hold the register spacing. */
|
|
reg_spacing = (data[0x10] & 0xC0) >> 6;
|
|
switch(reg_spacing){
|
|
case 0x00: /* Byte boundaries */
|
|
dmi->offset = 1;
|
|
break;
|
|
case 0x01: /* 32-bit boundaries */
|
|
dmi->offset = 4;
|
|
break;
|
|
case 0x02: /* 16-byte boundaries */
|
|
dmi->offset = 16;
|
|
break;
|
|
default:
|
|
/* Some other interface, just ignore it. */
|
|
return -EIO;
|
|
}
|
|
} else {
|
|
/* Old DMI spec. */
|
|
/* Note that technically, the lower bit of the base
|
|
* address should be 1 if the address is I/O and 0 if
|
|
* the address is in memory. So many systems get that
|
|
* wrong (and all that I have seen are I/O) so we just
|
|
* ignore that bit and assume I/O. Systems that use
|
|
* memory should use the newer spec, anyway. */
|
|
dmi->base_addr = base_addr & 0xfffe;
|
|
dmi->addr_space = IPMI_IO_ADDR_SPACE;
|
|
dmi->offset = 1;
|
|
}
|
|
|
|
dmi->slave_addr = data[6];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
|
|
{
|
|
struct smi_info *info;
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
printk(KERN_ERR
|
|
"ipmi_si: Could not allocate SI data\n");
|
|
return;
|
|
}
|
|
|
|
info->addr_source = "SMBIOS";
|
|
|
|
switch (ipmi_data->type) {
|
|
case 0x01: /* KCS */
|
|
info->si_type = SI_KCS;
|
|
break;
|
|
case 0x02: /* SMIC */
|
|
info->si_type = SI_SMIC;
|
|
break;
|
|
case 0x03: /* BT */
|
|
info->si_type = SI_BT;
|
|
break;
|
|
default:
|
|
kfree(info);
|
|
return;
|
|
}
|
|
|
|
switch (ipmi_data->addr_space) {
|
|
case IPMI_MEM_ADDR_SPACE:
|
|
info->io_setup = mem_setup;
|
|
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
|
|
break;
|
|
|
|
case IPMI_IO_ADDR_SPACE:
|
|
info->io_setup = port_setup;
|
|
info->io.addr_type = IPMI_IO_ADDR_SPACE;
|
|
break;
|
|
|
|
default:
|
|
kfree(info);
|
|
printk(KERN_WARNING
|
|
"ipmi_si: Unknown SMBIOS I/O Address type: %d.\n",
|
|
ipmi_data->addr_space);
|
|
return;
|
|
}
|
|
info->io.addr_data = ipmi_data->base_addr;
|
|
|
|
info->io.regspacing = ipmi_data->offset;
|
|
if (!info->io.regspacing)
|
|
info->io.regspacing = DEFAULT_REGSPACING;
|
|
info->io.regsize = DEFAULT_REGSPACING;
|
|
info->io.regshift = 0;
|
|
|
|
info->slave_addr = ipmi_data->slave_addr;
|
|
|
|
info->irq = ipmi_data->irq;
|
|
if (info->irq)
|
|
info->irq_setup = std_irq_setup;
|
|
|
|
try_smi_init(info);
|
|
}
|
|
|
|
static void __devinit dmi_find_bmc(void)
|
|
{
|
|
const struct dmi_device *dev = NULL;
|
|
struct dmi_ipmi_data data;
|
|
int rv;
|
|
|
|
while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
|
|
memset(&data, 0, sizeof(data));
|
|
rv = decode_dmi((const struct dmi_header *) dev->device_data,
|
|
&data);
|
|
if (!rv)
|
|
try_init_dmi(&data);
|
|
}
|
|
}
|
|
#endif /* CONFIG_DMI */
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
#define PCI_ERMC_CLASSCODE 0x0C0700
|
|
#define PCI_ERMC_CLASSCODE_MASK 0xffffff00
|
|
#define PCI_ERMC_CLASSCODE_TYPE_MASK 0xff
|
|
#define PCI_ERMC_CLASSCODE_TYPE_SMIC 0x00
|
|
#define PCI_ERMC_CLASSCODE_TYPE_KCS 0x01
|
|
#define PCI_ERMC_CLASSCODE_TYPE_BT 0x02
|
|
|
|
#define PCI_HP_VENDOR_ID 0x103C
|
|
#define PCI_MMC_DEVICE_ID 0x121A
|
|
#define PCI_MMC_ADDR_CW 0x10
|
|
|
|
static void ipmi_pci_cleanup(struct smi_info *info)
|
|
{
|
|
struct pci_dev *pdev = info->addr_source_data;
|
|
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
int rv;
|
|
int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
|
|
struct smi_info *info;
|
|
int first_reg_offset = 0;
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
info->addr_source = "PCI";
|
|
|
|
switch (class_type) {
|
|
case PCI_ERMC_CLASSCODE_TYPE_SMIC:
|
|
info->si_type = SI_SMIC;
|
|
break;
|
|
|
|
case PCI_ERMC_CLASSCODE_TYPE_KCS:
|
|
info->si_type = SI_KCS;
|
|
break;
|
|
|
|
case PCI_ERMC_CLASSCODE_TYPE_BT:
|
|
info->si_type = SI_BT;
|
|
break;
|
|
|
|
default:
|
|
kfree(info);
|
|
printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n",
|
|
pci_name(pdev), class_type);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rv = pci_enable_device(pdev);
|
|
if (rv) {
|
|
printk(KERN_ERR "ipmi_si: %s: couldn't enable PCI device\n",
|
|
pci_name(pdev));
|
|
kfree(info);
|
|
return rv;
|
|
}
|
|
|
|
info->addr_source_cleanup = ipmi_pci_cleanup;
|
|
info->addr_source_data = pdev;
|
|
|
|
if (pdev->subsystem_vendor == PCI_HP_VENDOR_ID)
|
|
first_reg_offset = 1;
|
|
|
|
if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
|
|
info->io_setup = port_setup;
|
|
info->io.addr_type = IPMI_IO_ADDR_SPACE;
|
|
} else {
|
|
info->io_setup = mem_setup;
|
|
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
|
|
}
|
|
info->io.addr_data = pci_resource_start(pdev, 0);
|
|
|
|
info->io.regspacing = DEFAULT_REGSPACING;
|
|
info->io.regsize = DEFAULT_REGSPACING;
|
|
info->io.regshift = 0;
|
|
|
|
info->irq = pdev->irq;
|
|
if (info->irq)
|
|
info->irq_setup = std_irq_setup;
|
|
|
|
info->dev = &pdev->dev;
|
|
pci_set_drvdata(pdev, info);
|
|
|
|
return try_smi_init(info);
|
|
}
|
|
|
|
static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct smi_info *info = pci_get_drvdata(pdev);
|
|
cleanup_one_si(info);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ipmi_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int ipmi_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static struct pci_device_id ipmi_pci_devices[] = {
|
|
{ PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
|
|
{ PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) },
|
|
{ 0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
|
|
|
|
static struct pci_driver ipmi_pci_driver = {
|
|
.name = DEVICE_NAME,
|
|
.id_table = ipmi_pci_devices,
|
|
.probe = ipmi_pci_probe,
|
|
.remove = __devexit_p(ipmi_pci_remove),
|
|
#ifdef CONFIG_PM
|
|
.suspend = ipmi_pci_suspend,
|
|
.resume = ipmi_pci_resume,
|
|
#endif
|
|
};
|
|
#endif /* CONFIG_PCI */
|
|
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
static int __devinit ipmi_of_probe(struct of_device *dev,
|
|
const struct of_device_id *match)
|
|
{
|
|
struct smi_info *info;
|
|
struct resource resource;
|
|
const int *regsize, *regspacing, *regshift;
|
|
struct device_node *np = dev->node;
|
|
int ret;
|
|
int proplen;
|
|
|
|
dev_info(&dev->dev, PFX "probing via device tree\n");
|
|
|
|
ret = of_address_to_resource(np, 0, &resource);
|
|
if (ret) {
|
|
dev_warn(&dev->dev, PFX "invalid address from OF\n");
|
|
return ret;
|
|
}
|
|
|
|
regsize = of_get_property(np, "reg-size", &proplen);
|
|
if (regsize && proplen != 4) {
|
|
dev_warn(&dev->dev, PFX "invalid regsize from OF\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regspacing = of_get_property(np, "reg-spacing", &proplen);
|
|
if (regspacing && proplen != 4) {
|
|
dev_warn(&dev->dev, PFX "invalid regspacing from OF\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regshift = of_get_property(np, "reg-shift", &proplen);
|
|
if (regshift && proplen != 4) {
|
|
dev_warn(&dev->dev, PFX "invalid regshift from OF\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
|
|
if (!info) {
|
|
dev_err(&dev->dev,
|
|
PFX "could not allocate memory for OF probe\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info->si_type = (enum si_type) match->data;
|
|
info->addr_source = "device-tree";
|
|
info->io_setup = mem_setup;
|
|
info->irq_setup = std_irq_setup;
|
|
|
|
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
|
|
info->io.addr_data = resource.start;
|
|
|
|
info->io.regsize = regsize ? *regsize : DEFAULT_REGSIZE;
|
|
info->io.regspacing = regspacing ? *regspacing : DEFAULT_REGSPACING;
|
|
info->io.regshift = regshift ? *regshift : 0;
|
|
|
|
info->irq = irq_of_parse_and_map(dev->node, 0);
|
|
info->dev = &dev->dev;
|
|
|
|
dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %x\n",
|
|
info->io.addr_data, info->io.regsize, info->io.regspacing,
|
|
info->irq);
|
|
|
|
dev->dev.driver_data = (void*) info;
|
|
|
|
return try_smi_init(info);
|
|
}
|
|
|
|
static int __devexit ipmi_of_remove(struct of_device *dev)
|
|
{
|
|
cleanup_one_si(dev->dev.driver_data);
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id ipmi_match[] =
|
|
{
|
|
{ .type = "ipmi", .compatible = "ipmi-kcs", .data = (void *)(unsigned long) SI_KCS },
|
|
{ .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC },
|
|
{ .type = "ipmi", .compatible = "ipmi-bt", .data = (void *)(unsigned long) SI_BT },
|
|
{},
|
|
};
|
|
|
|
static struct of_platform_driver ipmi_of_platform_driver =
|
|
{
|
|
.name = "ipmi",
|
|
.match_table = ipmi_match,
|
|
.probe = ipmi_of_probe,
|
|
.remove = __devexit_p(ipmi_of_remove),
|
|
};
|
|
#endif /* CONFIG_PPC_OF */
|
|
|
|
|
|
static int try_get_dev_id(struct smi_info *smi_info)
|
|
{
|
|
unsigned char msg[2];
|
|
unsigned char *resp;
|
|
unsigned long resp_len;
|
|
enum si_sm_result smi_result;
|
|
int rv = 0;
|
|
|
|
resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
|
|
if (!resp)
|
|
return -ENOMEM;
|
|
|
|
/* Do a Get Device ID command, since it comes back with some
|
|
useful info. */
|
|
msg[0] = IPMI_NETFN_APP_REQUEST << 2;
|
|
msg[1] = IPMI_GET_DEVICE_ID_CMD;
|
|
smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
|
|
|
|
smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
|
|
for (;;)
|
|
{
|
|
if (smi_result == SI_SM_CALL_WITH_DELAY ||
|
|
smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
|
|
schedule_timeout_uninterruptible(1);
|
|
smi_result = smi_info->handlers->event(
|
|
smi_info->si_sm, 100);
|
|
}
|
|
else if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
|
|
{
|
|
smi_result = smi_info->handlers->event(
|
|
smi_info->si_sm, 0);
|
|
}
|
|
else
|
|
break;
|
|
}
|
|
if (smi_result == SI_SM_HOSED) {
|
|
/* We couldn't get the state machine to run, so whatever's at
|
|
the port is probably not an IPMI SMI interface. */
|
|
rv = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
/* Otherwise, we got some data. */
|
|
resp_len = smi_info->handlers->get_result(smi_info->si_sm,
|
|
resp, IPMI_MAX_MSG_LENGTH);
|
|
if (resp_len < 14) {
|
|
/* That's odd, it should be longer. */
|
|
rv = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if ((resp[1] != IPMI_GET_DEVICE_ID_CMD) || (resp[2] != 0)) {
|
|
/* That's odd, it shouldn't be able to fail. */
|
|
rv = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* Record info from the get device id, in case we need it. */
|
|
ipmi_demangle_device_id(resp+3, resp_len-3, &smi_info->device_id);
|
|
|
|
out:
|
|
kfree(resp);
|
|
return rv;
|
|
}
|
|
|
|
static int type_file_read_proc(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
struct smi_info *smi = data;
|
|
|
|
return sprintf(page, "%s\n", si_to_str[smi->si_type]);
|
|
}
|
|
|
|
static int stat_file_read_proc(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
char *out = (char *) page;
|
|
struct smi_info *smi = data;
|
|
|
|
out += sprintf(out, "interrupts_enabled: %d\n",
|
|
smi->irq && !smi->interrupt_disabled);
|
|
out += sprintf(out, "short_timeouts: %ld\n",
|
|
smi->short_timeouts);
|
|
out += sprintf(out, "long_timeouts: %ld\n",
|
|
smi->long_timeouts);
|
|
out += sprintf(out, "timeout_restarts: %ld\n",
|
|
smi->timeout_restarts);
|
|
out += sprintf(out, "idles: %ld\n",
|
|
smi->idles);
|
|
out += sprintf(out, "interrupts: %ld\n",
|
|
smi->interrupts);
|
|
out += sprintf(out, "attentions: %ld\n",
|
|
smi->attentions);
|
|
out += sprintf(out, "flag_fetches: %ld\n",
|
|
smi->flag_fetches);
|
|
out += sprintf(out, "hosed_count: %ld\n",
|
|
smi->hosed_count);
|
|
out += sprintf(out, "complete_transactions: %ld\n",
|
|
smi->complete_transactions);
|
|
out += sprintf(out, "events: %ld\n",
|
|
smi->events);
|
|
out += sprintf(out, "watchdog_pretimeouts: %ld\n",
|
|
smi->watchdog_pretimeouts);
|
|
out += sprintf(out, "incoming_messages: %ld\n",
|
|
smi->incoming_messages);
|
|
|
|
return out - page;
|
|
}
|
|
|
|
static int param_read_proc(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
struct smi_info *smi = data;
|
|
|
|
return sprintf(page,
|
|
"%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n",
|
|
si_to_str[smi->si_type],
|
|
addr_space_to_str[smi->io.addr_type],
|
|
smi->io.addr_data,
|
|
smi->io.regspacing,
|
|
smi->io.regsize,
|
|
smi->io.regshift,
|
|
smi->irq,
|
|
smi->slave_addr);
|
|
}
|
|
|
|
/*
|
|
* oem_data_avail_to_receive_msg_avail
|
|
* @info - smi_info structure with msg_flags set
|
|
*
|
|
* Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL
|
|
* Returns 1 indicating need to re-run handle_flags().
|
|
*/
|
|
static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
|
|
{
|
|
smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
|
|
RECEIVE_MSG_AVAIL);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* setup_dell_poweredge_oem_data_handler
|
|
* @info - smi_info.device_id must be populated
|
|
*
|
|
* Systems that match, but have firmware version < 1.40 may assert
|
|
* OEM0_DATA_AVAIL on their own, without being told via Set Flags that
|
|
* it's safe to do so. Such systems will de-assert OEM1_DATA_AVAIL
|
|
* upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags
|
|
* as RECEIVE_MSG_AVAIL instead.
|
|
*
|
|
* As Dell has no plans to release IPMI 1.5 firmware that *ever*
|
|
* assert the OEM[012] bits, and if it did, the driver would have to
|
|
* change to handle that properly, we don't actually check for the
|
|
* firmware version.
|
|
* Device ID = 0x20 BMC on PowerEdge 8G servers
|
|
* Device Revision = 0x80
|
|
* Firmware Revision1 = 0x01 BMC version 1.40
|
|
* Firmware Revision2 = 0x40 BCD encoded
|
|
* IPMI Version = 0x51 IPMI 1.5
|
|
* Manufacturer ID = A2 02 00 Dell IANA
|
|
*
|
|
* Additionally, PowerEdge systems with IPMI < 1.5 may also assert
|
|
* OEM0_DATA_AVAIL and needs to be treated as RECEIVE_MSG_AVAIL.
|
|
*
|
|
*/
|
|
#define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20
|
|
#define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80
|
|
#define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51
|
|
#define DELL_IANA_MFR_ID 0x0002a2
|
|
static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
|
|
{
|
|
struct ipmi_device_id *id = &smi_info->device_id;
|
|
if (id->manufacturer_id == DELL_IANA_MFR_ID) {
|
|
if (id->device_id == DELL_POWEREDGE_8G_BMC_DEVICE_ID &&
|
|
id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV &&
|
|
id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
|
|
smi_info->oem_data_avail_handler =
|
|
oem_data_avail_to_receive_msg_avail;
|
|
}
|
|
else if (ipmi_version_major(id) < 1 ||
|
|
(ipmi_version_major(id) == 1 &&
|
|
ipmi_version_minor(id) < 5)) {
|
|
smi_info->oem_data_avail_handler =
|
|
oem_data_avail_to_receive_msg_avail;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define CANNOT_RETURN_REQUESTED_LENGTH 0xCA
|
|
static void return_hosed_msg_badsize(struct smi_info *smi_info)
|
|
{
|
|
struct ipmi_smi_msg *msg = smi_info->curr_msg;
|
|
|
|
/* Make it a reponse */
|
|
msg->rsp[0] = msg->data[0] | 4;
|
|
msg->rsp[1] = msg->data[1];
|
|
msg->rsp[2] = CANNOT_RETURN_REQUESTED_LENGTH;
|
|
msg->rsp_size = 3;
|
|
smi_info->curr_msg = NULL;
|
|
deliver_recv_msg(smi_info, msg);
|
|
}
|
|
|
|
/*
|
|
* dell_poweredge_bt_xaction_handler
|
|
* @info - smi_info.device_id must be populated
|
|
*
|
|
* Dell PowerEdge servers with the BT interface (x6xx and 1750) will
|
|
* not respond to a Get SDR command if the length of the data
|
|
* requested is exactly 0x3A, which leads to command timeouts and no
|
|
* data returned. This intercepts such commands, and causes userspace
|
|
* callers to try again with a different-sized buffer, which succeeds.
|
|
*/
|
|
|
|
#define STORAGE_NETFN 0x0A
|
|
#define STORAGE_CMD_GET_SDR 0x23
|
|
static int dell_poweredge_bt_xaction_handler(struct notifier_block *self,
|
|
unsigned long unused,
|
|
void *in)
|
|
{
|
|
struct smi_info *smi_info = in;
|
|
unsigned char *data = smi_info->curr_msg->data;
|
|
unsigned int size = smi_info->curr_msg->data_size;
|
|
if (size >= 8 &&
|
|
(data[0]>>2) == STORAGE_NETFN &&
|
|
data[1] == STORAGE_CMD_GET_SDR &&
|
|
data[7] == 0x3A) {
|
|
return_hosed_msg_badsize(smi_info);
|
|
return NOTIFY_STOP;
|
|
}
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block dell_poweredge_bt_xaction_notifier = {
|
|
.notifier_call = dell_poweredge_bt_xaction_handler,
|
|
};
|
|
|
|
/*
|
|
* setup_dell_poweredge_bt_xaction_handler
|
|
* @info - smi_info.device_id must be filled in already
|
|
*
|
|
* Fills in smi_info.device_id.start_transaction_pre_hook
|
|
* when we know what function to use there.
|
|
*/
|
|
static void
|
|
setup_dell_poweredge_bt_xaction_handler(struct smi_info *smi_info)
|
|
{
|
|
struct ipmi_device_id *id = &smi_info->device_id;
|
|
if (id->manufacturer_id == DELL_IANA_MFR_ID &&
|
|
smi_info->si_type == SI_BT)
|
|
register_xaction_notifier(&dell_poweredge_bt_xaction_notifier);
|
|
}
|
|
|
|
/*
|
|
* setup_oem_data_handler
|
|
* @info - smi_info.device_id must be filled in already
|
|
*
|
|
* Fills in smi_info.device_id.oem_data_available_handler
|
|
* when we know what function to use there.
|
|
*/
|
|
|
|
static void setup_oem_data_handler(struct smi_info *smi_info)
|
|
{
|
|
setup_dell_poweredge_oem_data_handler(smi_info);
|
|
}
|
|
|
|
static void setup_xaction_handlers(struct smi_info *smi_info)
|
|
{
|
|
setup_dell_poweredge_bt_xaction_handler(smi_info);
|
|
}
|
|
|
|
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
|
|
{
|
|
if (smi_info->intf) {
|
|
/* The timer and thread are only running if the
|
|
interface has been started up and registered. */
|
|
if (smi_info->thread != NULL)
|
|
kthread_stop(smi_info->thread);
|
|
del_timer_sync(&smi_info->si_timer);
|
|
}
|
|
}
|
|
|
|
static __devinitdata struct ipmi_default_vals
|
|
{
|
|
int type;
|
|
int port;
|
|
} ipmi_defaults[] =
|
|
{
|
|
{ .type = SI_KCS, .port = 0xca2 },
|
|
{ .type = SI_SMIC, .port = 0xca9 },
|
|
{ .type = SI_BT, .port = 0xe4 },
|
|
{ .port = 0 }
|
|
};
|
|
|
|
static __devinit void default_find_bmc(void)
|
|
{
|
|
struct smi_info *info;
|
|
int i;
|
|
|
|
for (i = 0; ; i++) {
|
|
if (!ipmi_defaults[i].port)
|
|
break;
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return;
|
|
|
|
#ifdef CONFIG_PPC_MERGE
|
|
if (check_legacy_ioport(ipmi_defaults[i].port))
|
|
continue;
|
|
#endif
|
|
|
|
info->addr_source = NULL;
|
|
|
|
info->si_type = ipmi_defaults[i].type;
|
|
info->io_setup = port_setup;
|
|
info->io.addr_data = ipmi_defaults[i].port;
|
|
info->io.addr_type = IPMI_IO_ADDR_SPACE;
|
|
|
|
info->io.addr = NULL;
|
|
info->io.regspacing = DEFAULT_REGSPACING;
|
|
info->io.regsize = DEFAULT_REGSPACING;
|
|
info->io.regshift = 0;
|
|
|
|
if (try_smi_init(info) == 0) {
|
|
/* Found one... */
|
|
printk(KERN_INFO "ipmi_si: Found default %s state"
|
|
" machine at %s address 0x%lx\n",
|
|
si_to_str[info->si_type],
|
|
addr_space_to_str[info->io.addr_type],
|
|
info->io.addr_data);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int is_new_interface(struct smi_info *info)
|
|
{
|
|
struct smi_info *e;
|
|
|
|
list_for_each_entry(e, &smi_infos, link) {
|
|
if (e->io.addr_type != info->io.addr_type)
|
|
continue;
|
|
if (e->io.addr_data == info->io.addr_data)
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int try_smi_init(struct smi_info *new_smi)
|
|
{
|
|
int rv;
|
|
|
|
if (new_smi->addr_source) {
|
|
printk(KERN_INFO "ipmi_si: Trying %s-specified %s state"
|
|
" machine at %s address 0x%lx, slave address 0x%x,"
|
|
" irq %d\n",
|
|
new_smi->addr_source,
|
|
si_to_str[new_smi->si_type],
|
|
addr_space_to_str[new_smi->io.addr_type],
|
|
new_smi->io.addr_data,
|
|
new_smi->slave_addr, new_smi->irq);
|
|
}
|
|
|
|
mutex_lock(&smi_infos_lock);
|
|
if (!is_new_interface(new_smi)) {
|
|
printk(KERN_WARNING "ipmi_si: duplicate interface\n");
|
|
rv = -EBUSY;
|
|
goto out_err;
|
|
}
|
|
|
|
/* So we know not to free it unless we have allocated one. */
|
|
new_smi->intf = NULL;
|
|
new_smi->si_sm = NULL;
|
|
new_smi->handlers = NULL;
|
|
|
|
switch (new_smi->si_type) {
|
|
case SI_KCS:
|
|
new_smi->handlers = &kcs_smi_handlers;
|
|
break;
|
|
|
|
case SI_SMIC:
|
|
new_smi->handlers = &smic_smi_handlers;
|
|
break;
|
|
|
|
case SI_BT:
|
|
new_smi->handlers = &bt_smi_handlers;
|
|
break;
|
|
|
|
default:
|
|
/* No support for anything else yet. */
|
|
rv = -EIO;
|
|
goto out_err;
|
|
}
|
|
|
|
/* Allocate the state machine's data and initialize it. */
|
|
new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
|
|
if (!new_smi->si_sm) {
|
|
printk(" Could not allocate state machine memory\n");
|
|
rv = -ENOMEM;
|
|
goto out_err;
|
|
}
|
|
new_smi->io_size = new_smi->handlers->init_data(new_smi->si_sm,
|
|
&new_smi->io);
|
|
|
|
/* Now that we know the I/O size, we can set up the I/O. */
|
|
rv = new_smi->io_setup(new_smi);
|
|
if (rv) {
|
|
printk(" Could not set up I/O space\n");
|
|
goto out_err;
|
|
}
|
|
|
|
spin_lock_init(&(new_smi->si_lock));
|
|
spin_lock_init(&(new_smi->msg_lock));
|
|
spin_lock_init(&(new_smi->count_lock));
|
|
|
|
/* Do low-level detection first. */
|
|
if (new_smi->handlers->detect(new_smi->si_sm)) {
|
|
if (new_smi->addr_source)
|
|
printk(KERN_INFO "ipmi_si: Interface detection"
|
|
" failed\n");
|
|
rv = -ENODEV;
|
|
goto out_err;
|
|
}
|
|
|
|
/* Attempt a get device id command. If it fails, we probably
|
|
don't have a BMC here. */
|
|
rv = try_get_dev_id(new_smi);
|
|
if (rv) {
|
|
if (new_smi->addr_source)
|
|
printk(KERN_INFO "ipmi_si: There appears to be no BMC"
|
|
" at this location\n");
|
|
goto out_err;
|
|
}
|
|
|
|
setup_oem_data_handler(new_smi);
|
|
setup_xaction_handlers(new_smi);
|
|
|
|
/* Try to claim any interrupts. */
|
|
if (new_smi->irq_setup)
|
|
new_smi->irq_setup(new_smi);
|
|
|
|
INIT_LIST_HEAD(&(new_smi->xmit_msgs));
|
|
INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
|
|
new_smi->curr_msg = NULL;
|
|
atomic_set(&new_smi->req_events, 0);
|
|
new_smi->run_to_completion = 0;
|
|
|
|
new_smi->interrupt_disabled = 0;
|
|
atomic_set(&new_smi->stop_operation, 0);
|
|
new_smi->intf_num = smi_num;
|
|
smi_num++;
|
|
|
|
/* Start clearing the flags before we enable interrupts or the
|
|
timer to avoid racing with the timer. */
|
|
start_clear_flags(new_smi);
|
|
/* IRQ is defined to be set when non-zero. */
|
|
if (new_smi->irq)
|
|
new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
|
|
|
|
if (!new_smi->dev) {
|
|
/* If we don't already have a device from something
|
|
* else (like PCI), then register a new one. */
|
|
new_smi->pdev = platform_device_alloc("ipmi_si",
|
|
new_smi->intf_num);
|
|
if (rv) {
|
|
printk(KERN_ERR
|
|
"ipmi_si_intf:"
|
|
" Unable to allocate platform device\n");
|
|
goto out_err;
|
|
}
|
|
new_smi->dev = &new_smi->pdev->dev;
|
|
new_smi->dev->driver = &ipmi_driver;
|
|
|
|
rv = platform_device_add(new_smi->pdev);
|
|
if (rv) {
|
|
printk(KERN_ERR
|
|
"ipmi_si_intf:"
|
|
" Unable to register system interface device:"
|
|
" %d\n",
|
|
rv);
|
|
goto out_err;
|
|
}
|
|
new_smi->dev_registered = 1;
|
|
}
|
|
|
|
rv = ipmi_register_smi(&handlers,
|
|
new_smi,
|
|
&new_smi->device_id,
|
|
new_smi->dev,
|
|
"bmc",
|
|
new_smi->slave_addr);
|
|
if (rv) {
|
|
printk(KERN_ERR
|
|
"ipmi_si: Unable to register device: error %d\n",
|
|
rv);
|
|
goto out_err_stop_timer;
|
|
}
|
|
|
|
rv = ipmi_smi_add_proc_entry(new_smi->intf, "type",
|
|
type_file_read_proc, NULL,
|
|
new_smi, THIS_MODULE);
|
|
if (rv) {
|
|
printk(KERN_ERR
|
|
"ipmi_si: Unable to create proc entry: %d\n",
|
|
rv);
|
|
goto out_err_stop_timer;
|
|
}
|
|
|
|
rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats",
|
|
stat_file_read_proc, NULL,
|
|
new_smi, THIS_MODULE);
|
|
if (rv) {
|
|
printk(KERN_ERR
|
|
"ipmi_si: Unable to create proc entry: %d\n",
|
|
rv);
|
|
goto out_err_stop_timer;
|
|
}
|
|
|
|
rv = ipmi_smi_add_proc_entry(new_smi->intf, "params",
|
|
param_read_proc, NULL,
|
|
new_smi, THIS_MODULE);
|
|
if (rv) {
|
|
printk(KERN_ERR
|
|
"ipmi_si: Unable to create proc entry: %d\n",
|
|
rv);
|
|
goto out_err_stop_timer;
|
|
}
|
|
|
|
list_add_tail(&new_smi->link, &smi_infos);
|
|
|
|
mutex_unlock(&smi_infos_lock);
|
|
|
|
printk(KERN_INFO "IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
|
|
|
|
return 0;
|
|
|
|
out_err_stop_timer:
|
|
atomic_inc(&new_smi->stop_operation);
|
|
wait_for_timer_and_thread(new_smi);
|
|
|
|
out_err:
|
|
if (new_smi->intf)
|
|
ipmi_unregister_smi(new_smi->intf);
|
|
|
|
if (new_smi->irq_cleanup)
|
|
new_smi->irq_cleanup(new_smi);
|
|
|
|
/* Wait until we know that we are out of any interrupt
|
|
handlers might have been running before we freed the
|
|
interrupt. */
|
|
synchronize_sched();
|
|
|
|
if (new_smi->si_sm) {
|
|
if (new_smi->handlers)
|
|
new_smi->handlers->cleanup(new_smi->si_sm);
|
|
kfree(new_smi->si_sm);
|
|
}
|
|
if (new_smi->addr_source_cleanup)
|
|
new_smi->addr_source_cleanup(new_smi);
|
|
if (new_smi->io_cleanup)
|
|
new_smi->io_cleanup(new_smi);
|
|
|
|
if (new_smi->dev_registered)
|
|
platform_device_unregister(new_smi->pdev);
|
|
|
|
kfree(new_smi);
|
|
|
|
mutex_unlock(&smi_infos_lock);
|
|
|
|
return rv;
|
|
}
|
|
|
|
static __devinit int init_ipmi_si(void)
|
|
{
|
|
int i;
|
|
char *str;
|
|
int rv;
|
|
|
|
if (initialized)
|
|
return 0;
|
|
initialized = 1;
|
|
|
|
/* Register the device drivers. */
|
|
rv = driver_register(&ipmi_driver);
|
|
if (rv) {
|
|
printk(KERN_ERR
|
|
"init_ipmi_si: Unable to register driver: %d\n",
|
|
rv);
|
|
return rv;
|
|
}
|
|
|
|
|
|
/* Parse out the si_type string into its components. */
|
|
str = si_type_str;
|
|
if (*str != '\0') {
|
|
for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) {
|
|
si_type[i] = str;
|
|
str = strchr(str, ',');
|
|
if (str) {
|
|
*str = '\0';
|
|
str++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
printk(KERN_INFO "IPMI System Interface driver.\n");
|
|
|
|
hardcode_find_bmc();
|
|
|
|
#ifdef CONFIG_DMI
|
|
dmi_find_bmc();
|
|
#endif
|
|
|
|
#ifdef CONFIG_ACPI
|
|
acpi_find_bmc();
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
rv = pci_register_driver(&ipmi_pci_driver);
|
|
if (rv){
|
|
printk(KERN_ERR
|
|
"init_ipmi_si: Unable to register PCI driver: %d\n",
|
|
rv);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
of_register_platform_driver(&ipmi_of_platform_driver);
|
|
#endif
|
|
|
|
if (si_trydefaults) {
|
|
mutex_lock(&smi_infos_lock);
|
|
if (list_empty(&smi_infos)) {
|
|
/* No BMC was found, try defaults. */
|
|
mutex_unlock(&smi_infos_lock);
|
|
default_find_bmc();
|
|
} else {
|
|
mutex_unlock(&smi_infos_lock);
|
|
}
|
|
}
|
|
|
|
mutex_lock(&smi_infos_lock);
|
|
if (unload_when_empty && list_empty(&smi_infos)) {
|
|
mutex_unlock(&smi_infos_lock);
|
|
#ifdef CONFIG_PCI
|
|
pci_unregister_driver(&ipmi_pci_driver);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
of_unregister_platform_driver(&ipmi_of_platform_driver);
|
|
#endif
|
|
driver_unregister(&ipmi_driver);
|
|
printk("ipmi_si: Unable to find any System Interface(s)\n");
|
|
return -ENODEV;
|
|
} else {
|
|
mutex_unlock(&smi_infos_lock);
|
|
return 0;
|
|
}
|
|
}
|
|
module_init(init_ipmi_si);
|
|
|
|
static void cleanup_one_si(struct smi_info *to_clean)
|
|
{
|
|
int rv;
|
|
unsigned long flags;
|
|
|
|
if (!to_clean)
|
|
return;
|
|
|
|
list_del(&to_clean->link);
|
|
|
|
/* Tell the driver that we are shutting down. */
|
|
atomic_inc(&to_clean->stop_operation);
|
|
|
|
/* Make sure the timer and thread are stopped and will not run
|
|
again. */
|
|
wait_for_timer_and_thread(to_clean);
|
|
|
|
/* Timeouts are stopped, now make sure the interrupts are off
|
|
for the device. A little tricky with locks to make sure
|
|
there are no races. */
|
|
spin_lock_irqsave(&to_clean->si_lock, flags);
|
|
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
|
|
spin_unlock_irqrestore(&to_clean->si_lock, flags);
|
|
poll(to_clean);
|
|
schedule_timeout_uninterruptible(1);
|
|
spin_lock_irqsave(&to_clean->si_lock, flags);
|
|
}
|
|
disable_si_irq(to_clean);
|
|
spin_unlock_irqrestore(&to_clean->si_lock, flags);
|
|
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
|
|
poll(to_clean);
|
|
schedule_timeout_uninterruptible(1);
|
|
}
|
|
|
|
/* Clean up interrupts and make sure that everything is done. */
|
|
if (to_clean->irq_cleanup)
|
|
to_clean->irq_cleanup(to_clean);
|
|
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
|
|
poll(to_clean);
|
|
schedule_timeout_uninterruptible(1);
|
|
}
|
|
|
|
rv = ipmi_unregister_smi(to_clean->intf);
|
|
if (rv) {
|
|
printk(KERN_ERR
|
|
"ipmi_si: Unable to unregister device: errno=%d\n",
|
|
rv);
|
|
}
|
|
|
|
to_clean->handlers->cleanup(to_clean->si_sm);
|
|
|
|
kfree(to_clean->si_sm);
|
|
|
|
if (to_clean->addr_source_cleanup)
|
|
to_clean->addr_source_cleanup(to_clean);
|
|
if (to_clean->io_cleanup)
|
|
to_clean->io_cleanup(to_clean);
|
|
|
|
if (to_clean->dev_registered)
|
|
platform_device_unregister(to_clean->pdev);
|
|
|
|
kfree(to_clean);
|
|
}
|
|
|
|
static __exit void cleanup_ipmi_si(void)
|
|
{
|
|
struct smi_info *e, *tmp_e;
|
|
|
|
if (!initialized)
|
|
return;
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_unregister_driver(&ipmi_pci_driver);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
of_unregister_platform_driver(&ipmi_of_platform_driver);
|
|
#endif
|
|
|
|
mutex_lock(&smi_infos_lock);
|
|
list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
|
|
cleanup_one_si(e);
|
|
mutex_unlock(&smi_infos_lock);
|
|
|
|
driver_unregister(&ipmi_driver);
|
|
}
|
|
module_exit(cleanup_ipmi_si);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
|
|
MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.");
|