![Stefan Roese](/assets/img/avatar_default.png)
This patch adds support for the 256k L2 cache found on some IBM/AMCC 4xx PPC's. It introduces a common 4xx SoC file (sysdev/ppc4xx_soc.c) which currently "only" adds the L2 cache init code. Other common 4xx stuff can be added later here. The L2 cache handling code is a copy of Eugene's code in arch/ppc with small modifications. Tested on AMCC Taishan 440GX. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
150 lines
4.7 KiB
C
150 lines
4.7 KiB
C
/*
|
|
* Common DCR / SDR / CPR register definitions used on various IBM/AMCC
|
|
* 4xx processors
|
|
*
|
|
* Copyright 2007 Benjamin Herrenschmidt, IBM Corp
|
|
* <benh@kernel.crashing.org>
|
|
*
|
|
* Mostly lifted from asm-ppc/ibm4xx.h by
|
|
*
|
|
* Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
|
|
*
|
|
*/
|
|
|
|
#ifndef __DCR_REGS_H__
|
|
#define __DCR_REGS_H__
|
|
|
|
/*
|
|
* Most DCRs used for controlling devices such as the MAL, DMA engine,
|
|
* etc... are obtained for the device tree.
|
|
*
|
|
* The definitions in this files are fixed DCRs and indirect DCRs that
|
|
* are commonly used outside of specific drivers or refer to core
|
|
* common registers that may occasionally have to be tweaked outside
|
|
* of the driver main register set
|
|
*/
|
|
|
|
/* CPRs (440GX and 440SP/440SPe) */
|
|
#define DCRN_CPR0_CONFIG_ADDR 0xc
|
|
#define DCRN_CPR0_CONFIG_DATA 0xd
|
|
|
|
/* SDRs (440GX and 440SP/440SPe) */
|
|
#define DCRN_SDR0_CONFIG_ADDR 0xe
|
|
#define DCRN_SDR0_CONFIG_DATA 0xf
|
|
|
|
#define SDR0_PFC0 0x4100
|
|
#define SDR0_PFC1 0x4101
|
|
#define SDR0_PFC1_EPS 0x1c00000
|
|
#define SDR0_PFC1_EPS_SHIFT 22
|
|
#define SDR0_PFC1_RMII 0x02000000
|
|
#define SDR0_MFR 0x4300
|
|
#define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */
|
|
#define SDR0_MFR_TAH1 0x40000000 /* TAHOE1 Enable */
|
|
#define SDR0_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */
|
|
#define SDR0_MFR_ECS 0x08000000 /* EMAC int clk */
|
|
#define SDR0_MFR_T0TXFL 0x00080000
|
|
#define SDR0_MFR_T0TXFH 0x00040000
|
|
#define SDR0_MFR_T1TXFL 0x00020000
|
|
#define SDR0_MFR_T1TXFH 0x00010000
|
|
#define SDR0_MFR_E0TXFL 0x00008000
|
|
#define SDR0_MFR_E0TXFH 0x00004000
|
|
#define SDR0_MFR_E0RXFL 0x00002000
|
|
#define SDR0_MFR_E0RXFH 0x00001000
|
|
#define SDR0_MFR_E1TXFL 0x00000800
|
|
#define SDR0_MFR_E1TXFH 0x00000400
|
|
#define SDR0_MFR_E1RXFL 0x00000200
|
|
#define SDR0_MFR_E1RXFH 0x00000100
|
|
#define SDR0_MFR_E2TXFL 0x00000080
|
|
#define SDR0_MFR_E2TXFH 0x00000040
|
|
#define SDR0_MFR_E2RXFL 0x00000020
|
|
#define SDR0_MFR_E2RXFH 0x00000010
|
|
#define SDR0_MFR_E3TXFL 0x00000008
|
|
#define SDR0_MFR_E3TXFH 0x00000004
|
|
#define SDR0_MFR_E3RXFL 0x00000002
|
|
#define SDR0_MFR_E3RXFH 0x00000001
|
|
#define SDR0_UART0 0x0120
|
|
#define SDR0_UART1 0x0121
|
|
#define SDR0_UART2 0x0122
|
|
#define SDR0_UART3 0x0123
|
|
#define SDR0_CUST0 0x4000
|
|
|
|
/*
|
|
* All those DCR register addresses are offsets from the base address
|
|
* for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
|
|
* excluded here and configured in the device tree.
|
|
*/
|
|
#define DCRN_SRAM0_SB0CR 0x00
|
|
#define DCRN_SRAM0_SB1CR 0x01
|
|
#define DCRN_SRAM0_SB2CR 0x02
|
|
#define DCRN_SRAM0_SB3CR 0x03
|
|
#define SRAM_SBCR_BU_MASK 0x00000180
|
|
#define SRAM_SBCR_BS_64KB 0x00000800
|
|
#define SRAM_SBCR_BU_RO 0x00000080
|
|
#define SRAM_SBCR_BU_RW 0x00000180
|
|
#define DCRN_SRAM0_BEAR 0x04
|
|
#define DCRN_SRAM0_BESR0 0x05
|
|
#define DCRN_SRAM0_BESR1 0x06
|
|
#define DCRN_SRAM0_PMEG 0x07
|
|
#define DCRN_SRAM0_CID 0x08
|
|
#define DCRN_SRAM0_REVID 0x09
|
|
#define DCRN_SRAM0_DPC 0x0a
|
|
#define SRAM_DPC_ENABLE 0x80000000
|
|
|
|
/*
|
|
* All those DCR register addresses are offsets from the base address
|
|
* for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
|
|
* excluded here and configured in the device tree.
|
|
*/
|
|
#define DCRN_L2C0_CFG 0x00
|
|
#define L2C_CFG_L2M 0x80000000
|
|
#define L2C_CFG_ICU 0x40000000
|
|
#define L2C_CFG_DCU 0x20000000
|
|
#define L2C_CFG_DCW_MASK 0x1e000000
|
|
#define L2C_CFG_TPC 0x01000000
|
|
#define L2C_CFG_CPC 0x00800000
|
|
#define L2C_CFG_FRAN 0x00200000
|
|
#define L2C_CFG_SS_MASK 0x00180000
|
|
#define L2C_CFG_SS_256 0x00000000
|
|
#define L2C_CFG_CPIM 0x00040000
|
|
#define L2C_CFG_TPIM 0x00020000
|
|
#define L2C_CFG_LIM 0x00010000
|
|
#define L2C_CFG_PMUX_MASK 0x00007000
|
|
#define L2C_CFG_PMUX_SNP 0x00000000
|
|
#define L2C_CFG_PMUX_IF 0x00001000
|
|
#define L2C_CFG_PMUX_DF 0x00002000
|
|
#define L2C_CFG_PMUX_DS 0x00003000
|
|
#define L2C_CFG_PMIM 0x00000800
|
|
#define L2C_CFG_TPEI 0x00000400
|
|
#define L2C_CFG_CPEI 0x00000200
|
|
#define L2C_CFG_NAM 0x00000100
|
|
#define L2C_CFG_SMCM 0x00000080
|
|
#define L2C_CFG_NBRM 0x00000040
|
|
#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */
|
|
#define DCRN_L2C0_CMD 0x01
|
|
#define L2C_CMD_CLR 0x80000000
|
|
#define L2C_CMD_DIAG 0x40000000
|
|
#define L2C_CMD_INV 0x20000000
|
|
#define L2C_CMD_CCP 0x10000000
|
|
#define L2C_CMD_CTE 0x08000000
|
|
#define L2C_CMD_STRC 0x04000000
|
|
#define L2C_CMD_STPC 0x02000000
|
|
#define L2C_CMD_RPMC 0x01000000
|
|
#define L2C_CMD_HCC 0x00800000
|
|
#define DCRN_L2C0_ADDR 0x02
|
|
#define DCRN_L2C0_DATA 0x03
|
|
#define DCRN_L2C0_SR 0x04
|
|
#define L2C_SR_CC 0x80000000
|
|
#define L2C_SR_CPE 0x40000000
|
|
#define L2C_SR_TPE 0x20000000
|
|
#define L2C_SR_LRU 0x10000000
|
|
#define L2C_SR_PCS 0x08000000
|
|
#define DCRN_L2C0_REVID 0x05
|
|
#define DCRN_L2C0_SNP0 0x06
|
|
#define DCRN_L2C0_SNP1 0x07
|
|
#define L2C_SNP_BA_MASK 0xffff0000
|
|
#define L2C_SNP_SSR_MASK 0x0000f000
|
|
#define L2C_SNP_SSR_32G 0x0000f000
|
|
#define L2C_SNP_ESR 0x00000800
|
|
|
|
#endif /* __DCR_REGS_H__ */
|