![Mark Brown](/assets/img/avatar_default.png)
Since enabling VMID takes a runtime PM reference there is no need to suppress suspend when doing a runtime suspend. Similarly the digital inputs and outputs are DAPM widgets and therefore the ASoC core will be holding a reference for them. This used to be required when integration with system suspend was being bodged. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
772 lines
18 KiB
C
772 lines
18 KiB
C
/*
|
|
* wm8994-core.c -- Device access for Wolfson WM8994
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <linux/mfd/wm8994/core.h>
|
|
#include <linux/mfd/wm8994/pdata.h>
|
|
#include <linux/mfd/wm8994/registers.h>
|
|
|
|
#include "wm8994.h"
|
|
|
|
/**
|
|
* wm8994_reg_read: Read a single WM8994 register.
|
|
*
|
|
* @wm8994: Device to read from.
|
|
* @reg: Register to read.
|
|
*/
|
|
int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(wm8994->regmap, reg, &val);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
else
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_reg_read);
|
|
|
|
/**
|
|
* wm8994_bulk_read: Read multiple WM8994 registers
|
|
*
|
|
* @wm8994: Device to read from
|
|
* @reg: First register
|
|
* @count: Number of registers
|
|
* @buf: Buffer to fill. The data will be returned big endian.
|
|
*/
|
|
int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
|
|
int count, u16 *buf)
|
|
{
|
|
return regmap_bulk_read(wm8994->regmap, reg, buf, count);
|
|
}
|
|
|
|
/**
|
|
* wm8994_reg_write: Write a single WM8994 register.
|
|
*
|
|
* @wm8994: Device to write to.
|
|
* @reg: Register to write to.
|
|
* @val: Value to write.
|
|
*/
|
|
int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
return regmap_write(wm8994->regmap, reg, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_reg_write);
|
|
|
|
/**
|
|
* wm8994_bulk_write: Write multiple WM8994 registers
|
|
*
|
|
* @wm8994: Device to write to
|
|
* @reg: First register
|
|
* @count: Number of registers
|
|
* @buf: Buffer to write from. Data must be big-endian formatted.
|
|
*/
|
|
int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
|
|
int count, const u16 *buf)
|
|
{
|
|
return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_bulk_write);
|
|
|
|
/**
|
|
* wm8994_set_bits: Set the value of a bitfield in a WM8994 register
|
|
*
|
|
* @wm8994: Device to write to.
|
|
* @reg: Register to write to.
|
|
* @mask: Mask of bits to set.
|
|
* @val: Value to set (unshifted)
|
|
*/
|
|
int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
|
|
unsigned short mask, unsigned short val)
|
|
{
|
|
return regmap_update_bits(wm8994->regmap, reg, mask, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_set_bits);
|
|
|
|
static struct mfd_cell wm8994_regulator_devs[] = {
|
|
{
|
|
.name = "wm8994-ldo",
|
|
.id = 1,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
{
|
|
.name = "wm8994-ldo",
|
|
.id = 2,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
};
|
|
|
|
static struct resource wm8994_codec_resources[] = {
|
|
{
|
|
.start = WM8994_IRQ_TEMP_SHUT,
|
|
.end = WM8994_IRQ_TEMP_WARN,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct resource wm8994_gpio_resources[] = {
|
|
{
|
|
.start = WM8994_IRQ_GPIO(1),
|
|
.end = WM8994_IRQ_GPIO(11),
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct mfd_cell wm8994_devs[] = {
|
|
{
|
|
.name = "wm8994-codec",
|
|
.num_resources = ARRAY_SIZE(wm8994_codec_resources),
|
|
.resources = wm8994_codec_resources,
|
|
},
|
|
|
|
{
|
|
.name = "wm8994-gpio",
|
|
.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
|
|
.resources = wm8994_gpio_resources,
|
|
.pm_runtime_no_callbacks = true,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Supplies for the main bulk of CODEC; the LDO supplies are ignored
|
|
* and should be handled via the standard regulator API supply
|
|
* management.
|
|
*/
|
|
static const char *wm1811_main_supplies[] = {
|
|
"DBVDD1",
|
|
"DBVDD2",
|
|
"DBVDD3",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
static const char *wm8994_main_supplies[] = {
|
|
"DBVDD",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
static const char *wm8958_main_supplies[] = {
|
|
"DBVDD1",
|
|
"DBVDD2",
|
|
"DBVDD3",
|
|
"DCVDD",
|
|
"AVDD1",
|
|
"AVDD2",
|
|
"CPVDD",
|
|
"SPKVDD1",
|
|
"SPKVDD2",
|
|
};
|
|
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
static int wm8994_suspend(struct device *dev)
|
|
{
|
|
struct wm8994 *wm8994 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* Don't actually go through with the suspend if the CODEC is
|
|
* still active for accessory detect. */
|
|
switch (wm8994->type) {
|
|
case WM8958:
|
|
case WM1811:
|
|
ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read power status: %d\n", ret);
|
|
} else if (ret & WM8958_MICD_ENA) {
|
|
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
|
|
return 0;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Disable LDO pulldowns while the device is suspended if we
|
|
* don't know that something will be driving them. */
|
|
if (!wm8994->ldo_ena_always_driven)
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
|
|
|
|
/* Explicitly put the device into reset in case regulators
|
|
* don't get disabled in order to ensure consistent restart.
|
|
*/
|
|
wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
|
|
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
|
|
|
|
regcache_mark_dirty(wm8994->regmap);
|
|
|
|
/* Restore GPIO registers to prevent problems with mismatched
|
|
* pin configurations.
|
|
*/
|
|
ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1,
|
|
WM8994_GPIO_11);
|
|
if (ret != 0)
|
|
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
|
|
|
|
/* In case one of the GPIOs is used as a wake input. */
|
|
ret = regcache_sync_region(wm8994->regmap,
|
|
WM8994_INTERRUPT_STATUS_1_MASK,
|
|
WM8994_INTERRUPT_STATUS_1_MASK);
|
|
if (ret != 0)
|
|
dev_err(dev, "Failed to restore interrupt mask: %d\n", ret);
|
|
|
|
regcache_cache_only(wm8994->regmap, true);
|
|
wm8994->suspended = true;
|
|
|
|
ret = regulator_bulk_disable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to disable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_resume(struct device *dev)
|
|
{
|
|
struct wm8994 *wm8994 = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* We may have lied to the PM core about suspending */
|
|
if (!wm8994->suspended)
|
|
return 0;
|
|
|
|
ret = regulator_bulk_enable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable supplies: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
regcache_cache_only(wm8994->regmap, false);
|
|
ret = regcache_sync(wm8994->regmap);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to restore register map: %d\n", ret);
|
|
goto err_enable;
|
|
}
|
|
|
|
/* Disable LDO pulldowns while the device is active */
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
|
|
0);
|
|
|
|
wm8994->suspended = false;
|
|
|
|
return 0;
|
|
|
|
err_enable:
|
|
regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_REGULATOR
|
|
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
|
|
{
|
|
struct wm8994_ldo_pdata *ldo_pdata;
|
|
|
|
if (!pdata)
|
|
return 0;
|
|
|
|
ldo_pdata = &pdata->ldo[ldo];
|
|
|
|
if (!ldo_pdata->init_data)
|
|
return 0;
|
|
|
|
return ldo_pdata->init_data->num_consumer_supplies != 0;
|
|
}
|
|
#else
|
|
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct reg_default wm8994_revc_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0x56, 0x3 },
|
|
{ 0x817, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
static const struct reg_default wm8958_reva_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0xcb, 0x81 },
|
|
{ 0x817, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
static const struct reg_default wm1811_reva_patch[] = {
|
|
{ 0x102, 0x3 },
|
|
{ 0x56, 0xc07 },
|
|
{ 0x5d, 0x7e },
|
|
{ 0x5e, 0x0 },
|
|
{ 0x102, 0x0 },
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
|
|
{
|
|
struct device_node *np = wm8994->dev->of_node;
|
|
struct wm8994_pdata *pdata = &wm8994->pdata;
|
|
int i;
|
|
|
|
if (!np)
|
|
return 0;
|
|
|
|
if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults,
|
|
ARRAY_SIZE(pdata->gpio_defaults)) >= 0) {
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
|
|
if (wm8994->pdata.gpio_defaults[i] == 0)
|
|
pdata->gpio_defaults[i]
|
|
= WM8994_CONFIGURE_GPIO;
|
|
}
|
|
}
|
|
|
|
of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias,
|
|
ARRAY_SIZE(pdata->micbias));
|
|
|
|
pdata->lineout1_diff = true;
|
|
pdata->lineout2_diff = true;
|
|
if (of_find_property(np, "wlf,lineout1-se", NULL))
|
|
pdata->lineout1_diff = false;
|
|
if (of_find_property(np, "wlf,lineout2-se", NULL))
|
|
pdata->lineout2_diff = false;
|
|
|
|
if (of_find_property(np, "wlf,lineout1-feedback", NULL))
|
|
pdata->lineout1fb = true;
|
|
if (of_find_property(np, "wlf,lineout2-feedback", NULL))
|
|
pdata->lineout2fb = true;
|
|
|
|
if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
|
|
pdata->lineout2fb = true;
|
|
|
|
pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
|
|
if (pdata->ldo[0].enable < 0)
|
|
pdata->ldo[0].enable = 0;
|
|
|
|
pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
|
|
if (pdata->ldo[1].enable < 0)
|
|
pdata->ldo[1].enable = 0;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Instantiate the generic non-control parts of the device.
|
|
*/
|
|
static int wm8994_device_init(struct wm8994 *wm8994, int irq)
|
|
{
|
|
struct wm8994_pdata *pdata;
|
|
struct regmap_config *regmap_config;
|
|
const struct reg_default *regmap_patch = NULL;
|
|
const char *devname;
|
|
int ret, i, patch_regs = 0;
|
|
int pulls = 0;
|
|
|
|
if (dev_get_platdata(wm8994->dev)) {
|
|
pdata = dev_get_platdata(wm8994->dev);
|
|
wm8994->pdata = *pdata;
|
|
}
|
|
pdata = &wm8994->pdata;
|
|
|
|
ret = wm8994_set_pdata_from_of(wm8994);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
dev_set_drvdata(wm8994->dev, wm8994);
|
|
|
|
/* Add the on-chip regulators first for bootstrapping */
|
|
ret = mfd_add_devices(wm8994->dev, -1,
|
|
wm8994_regulator_devs,
|
|
ARRAY_SIZE(wm8994_regulator_devs),
|
|
NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
|
|
break;
|
|
case WM8994:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
|
|
break;
|
|
case WM8958:
|
|
wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies);
|
|
break;
|
|
default:
|
|
BUG();
|
|
goto err;
|
|
}
|
|
|
|
wm8994->supplies = devm_kzalloc(wm8994->dev,
|
|
sizeof(struct regulator_bulk_data) *
|
|
wm8994->num_supplies, GFP_KERNEL);
|
|
if (!wm8994->supplies) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm1811_main_supplies[i];
|
|
break;
|
|
case WM8994:
|
|
for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm8994_main_supplies[i];
|
|
break;
|
|
case WM8958:
|
|
for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++)
|
|
wm8994->supplies[i].supply = wm8958_main_supplies[i];
|
|
break;
|
|
default:
|
|
BUG();
|
|
goto err;
|
|
}
|
|
|
|
ret = devm_regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
|
|
if (ret < 0) {
|
|
dev_err(wm8994->dev, "Failed to read ID register\n");
|
|
goto err_enable;
|
|
}
|
|
switch (ret) {
|
|
case 0x1811:
|
|
devname = "WM1811";
|
|
if (wm8994->type != WM1811)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM1811;
|
|
break;
|
|
case 0x8994:
|
|
devname = "WM8994";
|
|
if (wm8994->type != WM8994)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM8994;
|
|
break;
|
|
case 0x8958:
|
|
devname = "WM8958";
|
|
if (wm8994->type != WM8958)
|
|
dev_warn(wm8994->dev, "Device registered as type %d\n",
|
|
wm8994->type);
|
|
wm8994->type = WM8958;
|
|
break;
|
|
default:
|
|
dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
|
|
ret);
|
|
ret = -EINVAL;
|
|
goto err_enable;
|
|
}
|
|
|
|
ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
|
|
if (ret < 0) {
|
|
dev_err(wm8994->dev, "Failed to read revision register: %d\n",
|
|
ret);
|
|
goto err_enable;
|
|
}
|
|
wm8994->revision = ret & WM8994_CHIP_REV_MASK;
|
|
wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT;
|
|
|
|
switch (wm8994->type) {
|
|
case WM8994:
|
|
switch (wm8994->revision) {
|
|
case 0:
|
|
case 1:
|
|
dev_warn(wm8994->dev,
|
|
"revision %c not fully supported\n",
|
|
'A' + wm8994->revision);
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
default:
|
|
regmap_patch = wm8994_revc_patch;
|
|
patch_regs = ARRAY_SIZE(wm8994_revc_patch);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WM8958:
|
|
switch (wm8994->revision) {
|
|
case 0:
|
|
regmap_patch = wm8958_reva_patch;
|
|
patch_regs = ARRAY_SIZE(wm8958_reva_patch);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WM1811:
|
|
/* Revision C did not change the relevant layer */
|
|
if (wm8994->revision > 1)
|
|
wm8994->revision++;
|
|
|
|
regmap_patch = wm1811_reva_patch;
|
|
patch_regs = ARRAY_SIZE(wm1811_reva_patch);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname,
|
|
'A' + wm8994->revision, wm8994->cust_id);
|
|
|
|
switch (wm8994->type) {
|
|
case WM1811:
|
|
regmap_config = &wm1811_regmap_config;
|
|
break;
|
|
case WM8994:
|
|
regmap_config = &wm8994_regmap_config;
|
|
break;
|
|
case WM8958:
|
|
regmap_config = &wm8958_regmap_config;
|
|
break;
|
|
default:
|
|
dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Explicitly put the device into reset in case regulators
|
|
* don't get disabled in order to ensure we know the device
|
|
* state.
|
|
*/
|
|
ret = wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
|
|
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to reset device: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (regmap_patch) {
|
|
ret = regmap_register_patch(wm8994->regmap, regmap_patch,
|
|
patch_regs);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to register patch: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
wm8994->irq_base = pdata->irq_base;
|
|
wm8994->gpio_base = pdata->gpio_base;
|
|
|
|
/* GPIO configuration is only applied if it's non-zero */
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
|
|
if (pdata->gpio_defaults[i]) {
|
|
wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
|
|
0xffff, pdata->gpio_defaults[i]);
|
|
}
|
|
}
|
|
|
|
wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
|
|
|
|
if (pdata->spkmode_pu)
|
|
pulls |= WM8994_SPKMODE_PU;
|
|
|
|
/* Disable unneeded pulls */
|
|
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
|
|
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
|
|
WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
|
|
pulls);
|
|
|
|
/* In some system designs where the regulators are not in use,
|
|
* we can achieve a small reduction in leakage currents by
|
|
* floating LDO outputs. This bit makes no difference if the
|
|
* LDOs are enabled, it only affects cases where the LDOs were
|
|
* in operation and are then disabled.
|
|
*/
|
|
for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
|
|
if (wm8994_ldo_in_use(pdata, i))
|
|
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
|
|
WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
|
|
else
|
|
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
|
|
WM8994_LDO1_DISCH, 0);
|
|
}
|
|
|
|
wm8994_irq_init(wm8994);
|
|
|
|
ret = mfd_add_devices(wm8994->dev, -1,
|
|
wm8994_devs, ARRAY_SIZE(wm8994_devs),
|
|
NULL, 0, NULL);
|
|
if (ret != 0) {
|
|
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
|
|
pm_runtime_enable(wm8994->dev);
|
|
pm_runtime_idle(wm8994->dev);
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
wm8994_irq_exit(wm8994);
|
|
err_enable:
|
|
regulator_bulk_disable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
err:
|
|
mfd_remove_devices(wm8994->dev);
|
|
return ret;
|
|
}
|
|
|
|
static void wm8994_device_exit(struct wm8994 *wm8994)
|
|
{
|
|
pm_runtime_disable(wm8994->dev);
|
|
mfd_remove_devices(wm8994->dev);
|
|
wm8994_irq_exit(wm8994);
|
|
regulator_bulk_disable(wm8994->num_supplies,
|
|
wm8994->supplies);
|
|
}
|
|
|
|
static const struct of_device_id wm8994_of_match[] = {
|
|
{ .compatible = "wlf,wm1811", .data = (void *)WM1811 },
|
|
{ .compatible = "wlf,wm8994", .data = (void *)WM8994 },
|
|
{ .compatible = "wlf,wm8958", .data = (void *)WM8958 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, wm8994_of_match);
|
|
|
|
static int wm8994_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
struct wm8994 *wm8994;
|
|
int ret;
|
|
|
|
wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
|
|
if (wm8994 == NULL)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, wm8994);
|
|
wm8994->dev = &i2c->dev;
|
|
wm8994->irq = i2c->irq;
|
|
|
|
if (i2c->dev.of_node) {
|
|
of_id = of_match_device(wm8994_of_match, &i2c->dev);
|
|
if (of_id)
|
|
wm8994->type = (int)of_id->data;
|
|
} else {
|
|
wm8994->type = id->driver_data;
|
|
}
|
|
|
|
wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
|
|
if (IS_ERR(wm8994->regmap)) {
|
|
ret = PTR_ERR(wm8994->regmap);
|
|
dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return wm8994_device_init(wm8994, i2c->irq);
|
|
}
|
|
|
|
static int wm8994_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
|
|
|
|
wm8994_device_exit(wm8994);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8994_i2c_id[] = {
|
|
{ "wm1811", WM1811 },
|
|
{ "wm1811a", WM1811 },
|
|
{ "wm8994", WM8994 },
|
|
{ "wm8958", WM8958 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
|
|
|
|
static const struct dev_pm_ops wm8994_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
|
|
};
|
|
|
|
static struct i2c_driver wm8994_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8994",
|
|
.owner = THIS_MODULE,
|
|
.pm = &wm8994_pm_ops,
|
|
.of_match_table = of_match_ptr(wm8994_of_match),
|
|
},
|
|
.probe = wm8994_i2c_probe,
|
|
.remove = wm8994_i2c_remove,
|
|
.id_table = wm8994_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(wm8994_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|