b4b50fd78b
This branch contains mostly additions and changes to platform enablement
and SoC-level drivers. Since there's sometimes a dependency on device-tree
changes, there's also a fair amount of those in this branch.
Pieces worth mentioning are:
- Mbus driver for Marvell platforms, allowing kernel configuration
and resource allocation of on-chip peripherals.
- Enablement of the mbus infrastructure from Marvell PCI-e drivers.
- Preparation of MSI support for Marvell platforms.
- Addition of new PCI-e host controller driver for Tegra platforms
- Some churn caused by sharing of macro names between i.MX 6Q and 6DL
platforms in the device tree sources and header files.
- Various suspend/PM updates for Tegra, including LP1 support.
- Versatile Express support for MCPM, part of big little support.
- Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
- OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
The code that touches other architectures are patches moving
MSI arch-specific functions over to weak symbols and removal of
ARCH_SUPPORTS_MSI, acked by PCI maintainers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3
0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4
LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP
uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ
juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce
EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr
GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0
8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3
tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98
tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25
ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN
R8heV6GX5OzlFLGX2tKK
=fJ5x
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"This branch contains mostly additions and changes to platform
enablement and SoC-level drivers. Since there's sometimes a
dependency on device-tree changes, there's also a fair amount of
those in this branch.
Pieces worth mentioning are:
- Mbus driver for Marvell platforms, allowing kernel configuration
and resource allocation of on-chip peripherals.
- Enablement of the mbus infrastructure from Marvell PCI-e drivers.
- Preparation of MSI support for Marvell platforms.
- Addition of new PCI-e host controller driver for Tegra platforms
- Some churn caused by sharing of macro names between i.MX 6Q and 6DL
platforms in the device tree sources and header files.
- Various suspend/PM updates for Tegra, including LP1 support.
- Versatile Express support for MCPM, part of big little support.
- Allwinner platform support for A20 and A31 SoCs (dual and quad
Cortex-A7)
- OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
The code that touches other architectures are patches moving MSI
arch-specific functions over to weak symbols and removal of
ARCH_SUPPORTS_MSI, acked by PCI maintainers"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
ARM: dts: vf610-twr: enable i2c0 device
ARM: dts: i.MX51: Add one more I2C2 pinmux entry
ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
ARM: dts: i.MX27: Disable AUDMUX in the template
ARM: dts: wandboard: Add support for SDIO bcm4329
ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
ARM: dts: imx53-qsb: Make USBH1 functional
ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
ARM: dts: imx6qdl-sabresd: Add touchscreen support
ARM: imx: add ocram clock for imx53
ARM: dts: imx: ocram size is different between imx6q and imx6dl
ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
ARM: dts: i.MX27: Remove clock name from CPU node
...
78 lines
2.3 KiB
Plaintext
78 lines
2.3 KiB
Plaintext
config ARCH_VEXPRESS
|
|
bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ARM_AMBA
|
|
select ARM_GIC
|
|
select ARM_TIMER_SP804
|
|
select CLKDEV_LOOKUP
|
|
select COMMON_CLK
|
|
select COMMON_CLK_VERSATILE
|
|
select CPU_V7
|
|
select GENERIC_CLOCKEVENTS
|
|
select HAVE_ARM_SCU if SMP
|
|
select HAVE_ARM_TWD if SMP
|
|
select HAVE_CLK
|
|
select HAVE_PATA_PLATFORM
|
|
select HAVE_SMP
|
|
select ICST
|
|
select MIGHT_HAVE_CACHE_L2X0
|
|
select NO_IOPORT
|
|
select PLAT_VERSATILE
|
|
select PLAT_VERSATILE_CLCD
|
|
select POWER_RESET
|
|
select POWER_RESET_VEXPRESS
|
|
select POWER_SUPPLY
|
|
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
|
select VEXPRESS_CONFIG
|
|
help
|
|
This option enables support for systems using Cortex processor based
|
|
ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
|
|
for example:
|
|
|
|
- CoreTile Express A5x2 (V2P-CA5s)
|
|
- CoreTile Express A9x4 (V2P-CA9)
|
|
- CoreTile Express A15x2 (V2P-CA15)
|
|
- LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
|
|
(Soft Macrocell Models)
|
|
- Versatile Express RTSMs (Models)
|
|
|
|
You must boot using a Flattened Device Tree in order to use these
|
|
platforms. The traditional (ATAGs) boot method is not usable on
|
|
these boards with this option.
|
|
|
|
menu "Versatile Express platform type"
|
|
depends on ARCH_VEXPRESS
|
|
|
|
config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
|
|
bool "Enable A5 and A9 only errata work-arounds"
|
|
default y
|
|
select ARM_ERRATA_720789
|
|
select PL310_ERRATA_753970 if CACHE_PL310
|
|
help
|
|
Provides common dependencies for Versatile Express platforms
|
|
based on Cortex-A5 and Cortex-A9 processors. In order to
|
|
build a working kernel, you must also enable relevant core
|
|
tile support or Flattened Device Tree based support options.
|
|
|
|
config ARCH_VEXPRESS_CA9X4
|
|
bool "Versatile Express Cortex-A9x4 tile"
|
|
|
|
config ARCH_VEXPRESS_DCSCB
|
|
bool "Dual Cluster System Control Block (DCSCB) support"
|
|
depends on MCPM
|
|
select ARM_CCI
|
|
help
|
|
Support for the Dual Cluster System Configuration Block (DCSCB).
|
|
This is needed to provide CPU and cluster power management
|
|
on RTSM implementing big.LITTLE.
|
|
|
|
config ARCH_VEXPRESS_TC2_PM
|
|
bool "Versatile Express TC2 power management"
|
|
depends on MCPM
|
|
select ARM_CCI
|
|
help
|
|
Support for CPU and cluster power management on Versatile Express
|
|
with a TC2 (A15x2 A7x3) big.LITTLE core tile.
|
|
|
|
endmenu
|