![Hans Verkuil](/assets/img/avatar_default.png)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
430 lines
11 KiB
C
430 lines
11 KiB
C
/*
|
|
* For the STS-Thompson TDA7432 audio processor chip
|
|
*
|
|
* Handles audio functions: volume, balance, tone, loudness
|
|
* This driver will not complain if used with any
|
|
* other i2c device with the same address.
|
|
*
|
|
* Muting and tone control by Jonathan Isom <jisom@ematic.com>
|
|
*
|
|
* Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com>
|
|
* Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
* This code is placed under the terms of the GNU General Public License
|
|
* Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
|
|
* Which was based on tda8425.c by Greg Alexander (c) 1998
|
|
*
|
|
* OPTIONS:
|
|
* debug - set to 1 if you'd like to see debug messages
|
|
* set to 2 if you'd like to be inundated with debug messages
|
|
*
|
|
* loudness - set between 0 and 15 for varying degrees of loudness effect
|
|
*
|
|
* maxvol - set maximium volume to +20db (1), default is 0db(0)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/i2c-addr.h>
|
|
|
|
#ifndef VIDEO_AUDIO_BALANCE
|
|
# define VIDEO_AUDIO_BALANCE 32
|
|
#endif
|
|
|
|
MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>");
|
|
MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int maxvol;
|
|
static int loudness; /* disable loudness by default */
|
|
static int debug; /* insmod parameter */
|
|
module_param(debug, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0).");
|
|
module_param(loudness, int, S_IRUGO);
|
|
MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0).");
|
|
module_param(maxvol, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0).");
|
|
|
|
|
|
/* Structure of address and subaddresses for the tda7432 */
|
|
|
|
struct tda7432 {
|
|
struct v4l2_subdev sd;
|
|
struct v4l2_ctrl_handler hdl;
|
|
struct {
|
|
/* bass/treble cluster */
|
|
struct v4l2_ctrl *bass;
|
|
struct v4l2_ctrl *treble;
|
|
};
|
|
struct {
|
|
/* mute/balance cluster */
|
|
struct v4l2_ctrl *mute;
|
|
struct v4l2_ctrl *balance;
|
|
};
|
|
};
|
|
|
|
static inline struct tda7432 *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct tda7432, sd);
|
|
}
|
|
|
|
static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
|
|
{
|
|
return &container_of(ctrl->handler, struct tda7432, hdl)->sd;
|
|
}
|
|
|
|
/* The TDA7432 is made by STS-Thompson
|
|
* http://www.st.com
|
|
* http://us.st.com/stonline/books/pdf/docs/4056.pdf
|
|
*
|
|
* TDA7432: I2C-bus controlled basic audio processor
|
|
*
|
|
* The TDA7432 controls basic audio functions like volume, balance,
|
|
* and tone control (including loudness). It also has four channel
|
|
* output (for front and rear). Since most vidcap cards probably
|
|
* don't have 4 channel output, this driver will set front & rear
|
|
* together (no independent control).
|
|
*/
|
|
|
|
/* Subaddresses for TDA7432 */
|
|
|
|
#define TDA7432_IN 0x00 /* Input select */
|
|
#define TDA7432_VL 0x01 /* Volume */
|
|
#define TDA7432_TN 0x02 /* Bass, Treble (Tone) */
|
|
#define TDA7432_LF 0x03 /* Attenuation LF (Left Front) */
|
|
#define TDA7432_LR 0x04 /* Attenuation LR (Left Rear) */
|
|
#define TDA7432_RF 0x05 /* Attenuation RF (Right Front) */
|
|
#define TDA7432_RR 0x06 /* Attenuation RR (Right Rear) */
|
|
#define TDA7432_LD 0x07 /* Loudness */
|
|
|
|
|
|
/* Masks for bits in TDA7432 subaddresses */
|
|
|
|
/* Many of these not used - just for documentation */
|
|
|
|
/* Subaddress 0x00 - Input selection and bass control */
|
|
|
|
/* Bits 0,1,2 control input:
|
|
* 0x00 - Stereo input
|
|
* 0x02 - Mono input
|
|
* 0x03 - Mute (Using Attenuators Plays better with modules)
|
|
* Mono probably isn't used - I'm guessing only the stereo
|
|
* input is connected on most cards, so we'll set it to stereo.
|
|
*
|
|
* Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut
|
|
* Bit 4 controls bass range: 0/1 is extended/standard bass range
|
|
*
|
|
* Highest 3 bits not used
|
|
*/
|
|
|
|
#define TDA7432_STEREO_IN 0
|
|
#define TDA7432_MONO_IN 2 /* Probably won't be used */
|
|
#define TDA7432_BASS_SYM 1 << 3
|
|
#define TDA7432_BASS_NORM 1 << 4
|
|
|
|
/* Subaddress 0x01 - Volume */
|
|
|
|
/* Lower 7 bits control volume from -79dB to +32dB in 1dB steps
|
|
* Recommended maximum is +20 dB
|
|
*
|
|
* +32dB: 0x00
|
|
* +20dB: 0x0c
|
|
* 0dB: 0x20
|
|
* -79dB: 0x6f
|
|
*
|
|
* MSB (bit 7) controls loudness: 1/0 is loudness on/off
|
|
*/
|
|
|
|
#define TDA7432_VOL_0DB 0x20
|
|
#define TDA7432_LD_ON 1 << 7
|
|
|
|
|
|
/* Subaddress 0x02 - Tone control */
|
|
|
|
/* Bits 0,1,2 control absolute treble gain from 0dB to 14dB
|
|
* 0x0 is 14dB, 0x7 is 0dB
|
|
*
|
|
* Bit 3 controls treble attenuation/gain (sign)
|
|
* 1 = gain (+)
|
|
* 0 = attenuation (-)
|
|
*
|
|
* Bits 4,5,6 control absolute bass gain from 0dB to 14dB
|
|
* (This is only true for normal base range, set in 0x00)
|
|
* 0x0 << 4 is 14dB, 0x7 is 0dB
|
|
*
|
|
* Bit 7 controls bass attenuation/gain (sign)
|
|
* 1 << 7 = gain (+)
|
|
* 0 << 7 = attenuation (-)
|
|
*
|
|
* Example:
|
|
* 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble
|
|
*/
|
|
|
|
#define TDA7432_TREBLE_0DB 0xf
|
|
#define TDA7432_TREBLE 7
|
|
#define TDA7432_TREBLE_GAIN 1 << 3
|
|
#define TDA7432_BASS_0DB 0xf
|
|
#define TDA7432_BASS 7 << 4
|
|
#define TDA7432_BASS_GAIN 1 << 7
|
|
|
|
|
|
/* Subaddress 0x03 - Left Front attenuation */
|
|
/* Subaddress 0x04 - Left Rear attenuation */
|
|
/* Subaddress 0x05 - Right Front attenuation */
|
|
/* Subaddress 0x06 - Right Rear attenuation */
|
|
|
|
/* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB
|
|
* in 1.5dB steps.
|
|
*
|
|
* 0x00 is 0dB
|
|
* 0x1f is -37.5dB
|
|
*
|
|
* Bit 5 mutes that channel when set (1 = mute, 0 = unmute)
|
|
* We'll use the mute on the input, though (above)
|
|
* Bits 6,7 unused
|
|
*/
|
|
|
|
#define TDA7432_ATTEN_0DB 0x00
|
|
#define TDA7432_MUTE 0x1 << 5
|
|
|
|
|
|
/* Subaddress 0x07 - Loudness Control */
|
|
|
|
/* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps
|
|
* when bit 4 is NOT set
|
|
*
|
|
* 0x0 is 0dB
|
|
* 0xf is -15dB
|
|
*
|
|
* If bit 4 is set, then there is a flat attenuation according to
|
|
* the lower 4 bits, as above.
|
|
*
|
|
* Bits 5,6,7 unused
|
|
*/
|
|
|
|
|
|
|
|
/* Begin code */
|
|
|
|
static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
unsigned char buffer[2];
|
|
|
|
v4l2_dbg(2, debug, sd, "In tda7432_write\n");
|
|
v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val);
|
|
buffer[0] = subaddr;
|
|
buffer[1] = val;
|
|
if (2 != i2c_master_send(client, buffer, 2)) {
|
|
v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n",
|
|
subaddr, val);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int tda7432_set(struct v4l2_subdev *sd)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
unsigned char buf[16];
|
|
|
|
buf[0] = TDA7432_IN;
|
|
buf[1] = TDA7432_STEREO_IN | /* Main (stereo) input */
|
|
TDA7432_BASS_SYM | /* Symmetric bass cut */
|
|
TDA7432_BASS_NORM; /* Normal bass range */
|
|
buf[2] = 0x3b;
|
|
if (loudness) /* Turn loudness on? */
|
|
buf[2] |= TDA7432_LD_ON;
|
|
buf[3] = TDA7432_TREBLE_0DB | (TDA7432_BASS_0DB << 4);
|
|
buf[4] = TDA7432_ATTEN_0DB;
|
|
buf[5] = TDA7432_ATTEN_0DB;
|
|
buf[6] = TDA7432_ATTEN_0DB;
|
|
buf[7] = TDA7432_ATTEN_0DB;
|
|
buf[8] = loudness;
|
|
if (9 != i2c_master_send(client, buf, 9)) {
|
|
v4l2_err(sd, "I/O error, trying tda7432_set\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tda7432_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct tda7432 *state = to_state(sd);
|
|
|
|
v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
|
|
return 0;
|
|
}
|
|
|
|
static int tda7432_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct v4l2_subdev *sd = to_sd(ctrl);
|
|
struct tda7432 *t = to_state(sd);
|
|
u8 bass, treble, volume;
|
|
u8 lf, lr, rf, rr;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
if (t->balance->val < 0) {
|
|
/* shifted to left, attenuate right */
|
|
rr = rf = -t->balance->val;
|
|
lr = lf = TDA7432_ATTEN_0DB;
|
|
} else if (t->balance->val > 0) {
|
|
/* shifted to right, attenuate left */
|
|
rr = rf = TDA7432_ATTEN_0DB;
|
|
lr = lf = t->balance->val;
|
|
} else {
|
|
/* centered */
|
|
rr = rf = TDA7432_ATTEN_0DB;
|
|
lr = lf = TDA7432_ATTEN_0DB;
|
|
}
|
|
if (t->mute->val) {
|
|
lf |= TDA7432_MUTE;
|
|
lr |= TDA7432_MUTE;
|
|
lf |= TDA7432_MUTE;
|
|
rr |= TDA7432_MUTE;
|
|
}
|
|
/* Mute & update balance*/
|
|
tda7432_write(sd, TDA7432_LF, lf);
|
|
tda7432_write(sd, TDA7432_LR, lr);
|
|
tda7432_write(sd, TDA7432_RF, rf);
|
|
tda7432_write(sd, TDA7432_RR, rr);
|
|
return 0;
|
|
case V4L2_CID_AUDIO_VOLUME:
|
|
volume = 0x6f - ctrl->val;
|
|
if (loudness) /* Turn on the loudness bit */
|
|
volume |= TDA7432_LD_ON;
|
|
|
|
tda7432_write(sd, TDA7432_VL, volume);
|
|
return 0;
|
|
case V4L2_CID_AUDIO_BASS:
|
|
bass = t->bass->val;
|
|
treble = t->treble->val;
|
|
if (bass >= 0x8)
|
|
bass = 14 - (bass - 8);
|
|
if (treble >= 0x8)
|
|
treble = 14 - (treble - 8);
|
|
|
|
tda7432_write(sd, TDA7432_TN, 0x10 | (bass << 4) | treble);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct v4l2_ctrl_ops tda7432_ctrl_ops = {
|
|
.s_ctrl = tda7432_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops tda7432_core_ops = {
|
|
.log_status = tda7432_log_status,
|
|
.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
|
|
.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
|
|
.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
|
|
.g_ctrl = v4l2_subdev_g_ctrl,
|
|
.s_ctrl = v4l2_subdev_s_ctrl,
|
|
.queryctrl = v4l2_subdev_queryctrl,
|
|
.querymenu = v4l2_subdev_querymenu,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops tda7432_ops = {
|
|
.core = &tda7432_core_ops,
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/* *********************** *
|
|
* i2c interface functions *
|
|
* *********************** */
|
|
|
|
static int tda7432_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct tda7432 *t;
|
|
struct v4l2_subdev *sd;
|
|
|
|
v4l_info(client, "chip found @ 0x%02x (%s)\n",
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
t = kzalloc(sizeof(*t), GFP_KERNEL);
|
|
if (!t)
|
|
return -ENOMEM;
|
|
sd = &t->sd;
|
|
v4l2_i2c_subdev_init(sd, client, &tda7432_ops);
|
|
v4l2_ctrl_handler_init(&t->hdl, 5);
|
|
v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
|
|
V4L2_CID_AUDIO_VOLUME, 0, maxvol ? 0x68 : 0x4f, 1, maxvol ? 0x5d : 0x47);
|
|
t->mute = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
|
|
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
|
|
t->balance = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
|
|
V4L2_CID_AUDIO_BALANCE, -31, 31, 1, 0);
|
|
t->bass = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
|
|
V4L2_CID_AUDIO_BASS, 0, 14, 1, 7);
|
|
t->treble = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
|
|
V4L2_CID_AUDIO_TREBLE, 0, 14, 1, 7);
|
|
sd->ctrl_handler = &t->hdl;
|
|
if (t->hdl.error) {
|
|
int err = t->hdl.error;
|
|
|
|
v4l2_ctrl_handler_free(&t->hdl);
|
|
kfree(t);
|
|
return err;
|
|
}
|
|
v4l2_ctrl_cluster(2, &t->bass);
|
|
v4l2_ctrl_cluster(2, &t->mute);
|
|
v4l2_ctrl_handler_setup(&t->hdl);
|
|
if (loudness < 0 || loudness > 15) {
|
|
v4l2_warn(sd, "loudness parameter must be between 0 and 15\n");
|
|
if (loudness < 0)
|
|
loudness = 0;
|
|
if (loudness > 15)
|
|
loudness = 15;
|
|
}
|
|
|
|
tda7432_set(sd);
|
|
return 0;
|
|
}
|
|
|
|
static int tda7432_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct tda7432 *t = to_state(sd);
|
|
|
|
tda7432_set(sd);
|
|
v4l2_device_unregister_subdev(sd);
|
|
v4l2_ctrl_handler_free(&t->hdl);
|
|
kfree(t);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id tda7432_id[] = {
|
|
{ "tda7432", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tda7432_id);
|
|
|
|
static struct i2c_driver tda7432_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "tda7432",
|
|
},
|
|
.probe = tda7432_probe,
|
|
.remove = tda7432_remove,
|
|
.id_table = tda7432_id,
|
|
};
|
|
|
|
module_i2c_driver(tda7432_driver);
|