![Jacob Keller](/assets/img/avatar_default.png)
In fm10k_get_host_state_generic, we check the mailbox tx_read() function to ensure that the mailbox is still open. This function also checks to make sure we have space to transmit another message. Unfortunately, if we just recently sent a bunch of messages (such as enabling hundreds of VLANs on a VF) this can result in a race where the watchdog task thinks the link went down just because we haven't had time to process all these messages yet. Instead, lets just check whether the mailbox is still open. This ensures that we don't race with the Tx FIFO, and we only link down once the mailbox is not open. This is safe, because if the FIFO fills up and we're unable to send a message for too long, we'll end up triggering the timeout detection which results in a reset. Additionally, since we still check to ensure the mailbox state is OPEN, we'll transition to link down whenever the mailbox closes as well. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
541 lines
15 KiB
C
541 lines
15 KiB
C
/* Intel(R) Ethernet Switch Host Interface Driver
|
|
* Copyright(c) 2013 - 2017 Intel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* The full GNU General Public License is included in this distribution in
|
|
* the file called "COPYING".
|
|
*
|
|
* Contact Information:
|
|
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*/
|
|
|
|
#include "fm10k_common.h"
|
|
|
|
/**
|
|
* fm10k_get_bus_info_generic - Generic set PCI bus info
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Gets the PCI bus info (speed, width, type) then calls helper function to
|
|
* store this data within the fm10k_hw structure.
|
|
**/
|
|
s32 fm10k_get_bus_info_generic(struct fm10k_hw *hw)
|
|
{
|
|
u16 link_cap, link_status, device_cap, device_control;
|
|
|
|
/* Get the maximum link width and speed from PCIe config space */
|
|
link_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_CAP);
|
|
|
|
switch (link_cap & FM10K_PCIE_LINK_WIDTH) {
|
|
case FM10K_PCIE_LINK_WIDTH_1:
|
|
hw->bus_caps.width = fm10k_bus_width_pcie_x1;
|
|
break;
|
|
case FM10K_PCIE_LINK_WIDTH_2:
|
|
hw->bus_caps.width = fm10k_bus_width_pcie_x2;
|
|
break;
|
|
case FM10K_PCIE_LINK_WIDTH_4:
|
|
hw->bus_caps.width = fm10k_bus_width_pcie_x4;
|
|
break;
|
|
case FM10K_PCIE_LINK_WIDTH_8:
|
|
hw->bus_caps.width = fm10k_bus_width_pcie_x8;
|
|
break;
|
|
default:
|
|
hw->bus_caps.width = fm10k_bus_width_unknown;
|
|
break;
|
|
}
|
|
|
|
switch (link_cap & FM10K_PCIE_LINK_SPEED) {
|
|
case FM10K_PCIE_LINK_SPEED_2500:
|
|
hw->bus_caps.speed = fm10k_bus_speed_2500;
|
|
break;
|
|
case FM10K_PCIE_LINK_SPEED_5000:
|
|
hw->bus_caps.speed = fm10k_bus_speed_5000;
|
|
break;
|
|
case FM10K_PCIE_LINK_SPEED_8000:
|
|
hw->bus_caps.speed = fm10k_bus_speed_8000;
|
|
break;
|
|
default:
|
|
hw->bus_caps.speed = fm10k_bus_speed_unknown;
|
|
break;
|
|
}
|
|
|
|
/* Get the PCIe maximum payload size for the PCIe function */
|
|
device_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CAP);
|
|
|
|
switch (device_cap & FM10K_PCIE_DEV_CAP_PAYLOAD) {
|
|
case FM10K_PCIE_DEV_CAP_PAYLOAD_128:
|
|
hw->bus_caps.payload = fm10k_bus_payload_128;
|
|
break;
|
|
case FM10K_PCIE_DEV_CAP_PAYLOAD_256:
|
|
hw->bus_caps.payload = fm10k_bus_payload_256;
|
|
break;
|
|
case FM10K_PCIE_DEV_CAP_PAYLOAD_512:
|
|
hw->bus_caps.payload = fm10k_bus_payload_512;
|
|
break;
|
|
default:
|
|
hw->bus_caps.payload = fm10k_bus_payload_unknown;
|
|
break;
|
|
}
|
|
|
|
/* Get the negotiated link width and speed from PCIe config space */
|
|
link_status = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_STATUS);
|
|
|
|
switch (link_status & FM10K_PCIE_LINK_WIDTH) {
|
|
case FM10K_PCIE_LINK_WIDTH_1:
|
|
hw->bus.width = fm10k_bus_width_pcie_x1;
|
|
break;
|
|
case FM10K_PCIE_LINK_WIDTH_2:
|
|
hw->bus.width = fm10k_bus_width_pcie_x2;
|
|
break;
|
|
case FM10K_PCIE_LINK_WIDTH_4:
|
|
hw->bus.width = fm10k_bus_width_pcie_x4;
|
|
break;
|
|
case FM10K_PCIE_LINK_WIDTH_8:
|
|
hw->bus.width = fm10k_bus_width_pcie_x8;
|
|
break;
|
|
default:
|
|
hw->bus.width = fm10k_bus_width_unknown;
|
|
break;
|
|
}
|
|
|
|
switch (link_status & FM10K_PCIE_LINK_SPEED) {
|
|
case FM10K_PCIE_LINK_SPEED_2500:
|
|
hw->bus.speed = fm10k_bus_speed_2500;
|
|
break;
|
|
case FM10K_PCIE_LINK_SPEED_5000:
|
|
hw->bus.speed = fm10k_bus_speed_5000;
|
|
break;
|
|
case FM10K_PCIE_LINK_SPEED_8000:
|
|
hw->bus.speed = fm10k_bus_speed_8000;
|
|
break;
|
|
default:
|
|
hw->bus.speed = fm10k_bus_speed_unknown;
|
|
break;
|
|
}
|
|
|
|
/* Get the negotiated PCIe maximum payload size for the PCIe function */
|
|
device_control = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CTRL);
|
|
|
|
switch (device_control & FM10K_PCIE_DEV_CTRL_PAYLOAD) {
|
|
case FM10K_PCIE_DEV_CTRL_PAYLOAD_128:
|
|
hw->bus.payload = fm10k_bus_payload_128;
|
|
break;
|
|
case FM10K_PCIE_DEV_CTRL_PAYLOAD_256:
|
|
hw->bus.payload = fm10k_bus_payload_256;
|
|
break;
|
|
case FM10K_PCIE_DEV_CTRL_PAYLOAD_512:
|
|
hw->bus.payload = fm10k_bus_payload_512;
|
|
break;
|
|
default:
|
|
hw->bus.payload = fm10k_bus_payload_unknown;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u16 fm10k_get_pcie_msix_count_generic(struct fm10k_hw *hw)
|
|
{
|
|
u16 msix_count;
|
|
|
|
/* read in value from MSI-X capability register */
|
|
msix_count = fm10k_read_pci_cfg_word(hw, FM10K_PCI_MSIX_MSG_CTRL);
|
|
msix_count &= FM10K_PCI_MSIX_MSG_CTRL_TBL_SZ_MASK;
|
|
|
|
/* MSI-X count is zero-based in HW */
|
|
msix_count++;
|
|
|
|
if (msix_count > FM10K_MAX_MSIX_VECTORS)
|
|
msix_count = FM10K_MAX_MSIX_VECTORS;
|
|
|
|
return msix_count;
|
|
}
|
|
|
|
/**
|
|
* fm10k_get_invariants_generic - Inits constant values
|
|
* @hw: pointer to the hardware structure
|
|
*
|
|
* Initialize the common invariants for the device.
|
|
**/
|
|
s32 fm10k_get_invariants_generic(struct fm10k_hw *hw)
|
|
{
|
|
struct fm10k_mac_info *mac = &hw->mac;
|
|
|
|
/* initialize GLORT state to avoid any false hits */
|
|
mac->dglort_map = FM10K_DGLORTMAP_NONE;
|
|
|
|
/* record maximum number of MSI-X vectors */
|
|
mac->max_msix_vectors = fm10k_get_pcie_msix_count_generic(hw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fm10k_start_hw_generic - Prepare hardware for Tx/Rx
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* This function sets the Tx ready flag to indicate that the Tx path has
|
|
* been initialized.
|
|
**/
|
|
s32 fm10k_start_hw_generic(struct fm10k_hw *hw)
|
|
{
|
|
/* set flag indicating we are beginning Tx */
|
|
hw->mac.tx_ready = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fm10k_disable_queues_generic - Stop Tx/Rx queues
|
|
* @hw: pointer to hardware structure
|
|
* @q_cnt: number of queues to be disabled
|
|
*
|
|
**/
|
|
s32 fm10k_disable_queues_generic(struct fm10k_hw *hw, u16 q_cnt)
|
|
{
|
|
u32 reg;
|
|
u16 i, time;
|
|
|
|
/* clear tx_ready to prevent any false hits for reset */
|
|
hw->mac.tx_ready = false;
|
|
|
|
if (FM10K_REMOVED(hw->hw_addr))
|
|
return 0;
|
|
|
|
/* clear the enable bit for all rings */
|
|
for (i = 0; i < q_cnt; i++) {
|
|
reg = fm10k_read_reg(hw, FM10K_TXDCTL(i));
|
|
fm10k_write_reg(hw, FM10K_TXDCTL(i),
|
|
reg & ~FM10K_TXDCTL_ENABLE);
|
|
reg = fm10k_read_reg(hw, FM10K_RXQCTL(i));
|
|
fm10k_write_reg(hw, FM10K_RXQCTL(i),
|
|
reg & ~FM10K_RXQCTL_ENABLE);
|
|
}
|
|
|
|
fm10k_write_flush(hw);
|
|
udelay(1);
|
|
|
|
/* loop through all queues to verify that they are all disabled */
|
|
for (i = 0, time = FM10K_QUEUE_DISABLE_TIMEOUT; time;) {
|
|
/* if we are at end of rings all rings are disabled */
|
|
if (i == q_cnt)
|
|
return 0;
|
|
|
|
/* if queue enables cleared, then move to next ring pair */
|
|
reg = fm10k_read_reg(hw, FM10K_TXDCTL(i));
|
|
if (!~reg || !(reg & FM10K_TXDCTL_ENABLE)) {
|
|
reg = fm10k_read_reg(hw, FM10K_RXQCTL(i));
|
|
if (!~reg || !(reg & FM10K_RXQCTL_ENABLE)) {
|
|
i++;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* decrement time and wait 1 usec */
|
|
time--;
|
|
if (time)
|
|
udelay(1);
|
|
}
|
|
|
|
return FM10K_ERR_REQUESTS_PENDING;
|
|
}
|
|
|
|
/**
|
|
* fm10k_stop_hw_generic - Stop Tx/Rx units
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
s32 fm10k_stop_hw_generic(struct fm10k_hw *hw)
|
|
{
|
|
return fm10k_disable_queues_generic(hw, hw->mac.max_queues);
|
|
}
|
|
|
|
/**
|
|
* fm10k_read_hw_stats_32b - Reads value of 32-bit registers
|
|
* @hw: pointer to the hardware structure
|
|
* @addr: address of register containing a 32-bit value
|
|
*
|
|
* Function reads the content of the register and returns the delta
|
|
* between the base and the current value.
|
|
* **/
|
|
u32 fm10k_read_hw_stats_32b(struct fm10k_hw *hw, u32 addr,
|
|
struct fm10k_hw_stat *stat)
|
|
{
|
|
u32 delta = fm10k_read_reg(hw, addr) - stat->base_l;
|
|
|
|
if (FM10K_REMOVED(hw->hw_addr))
|
|
stat->base_h = 0;
|
|
|
|
return delta;
|
|
}
|
|
|
|
/**
|
|
* fm10k_read_hw_stats_48b - Reads value of 48-bit registers
|
|
* @hw: pointer to the hardware structure
|
|
* @addr: address of register containing the lower 32-bit value
|
|
*
|
|
* Function reads the content of 2 registers, combined to represent a 48-bit
|
|
* statistical value. Extra processing is required to handle overflowing.
|
|
* Finally, a delta value is returned representing the difference between the
|
|
* values stored in registers and values stored in the statistic counters.
|
|
* **/
|
|
static u64 fm10k_read_hw_stats_48b(struct fm10k_hw *hw, u32 addr,
|
|
struct fm10k_hw_stat *stat)
|
|
{
|
|
u32 count_l;
|
|
u32 count_h;
|
|
u32 count_tmp;
|
|
u64 delta;
|
|
|
|
count_h = fm10k_read_reg(hw, addr + 1);
|
|
|
|
/* Check for overflow */
|
|
do {
|
|
count_tmp = count_h;
|
|
count_l = fm10k_read_reg(hw, addr);
|
|
count_h = fm10k_read_reg(hw, addr + 1);
|
|
} while (count_h != count_tmp);
|
|
|
|
delta = ((u64)(count_h - stat->base_h) << 32) + count_l;
|
|
delta -= stat->base_l;
|
|
|
|
return delta & FM10K_48_BIT_MASK;
|
|
}
|
|
|
|
/**
|
|
* fm10k_update_hw_base_48b - Updates 48-bit statistic base value
|
|
* @stat: pointer to the hardware statistic structure
|
|
* @delta: value to be updated into the hardware statistic structure
|
|
*
|
|
* Function receives a value and determines if an update is required based on
|
|
* a delta calculation. Only the base value will be updated.
|
|
**/
|
|
static void fm10k_update_hw_base_48b(struct fm10k_hw_stat *stat, u64 delta)
|
|
{
|
|
if (!delta)
|
|
return;
|
|
|
|
/* update lower 32 bits */
|
|
delta += stat->base_l;
|
|
stat->base_l = (u32)delta;
|
|
|
|
/* update upper 32 bits */
|
|
stat->base_h += (u32)(delta >> 32);
|
|
}
|
|
|
|
/**
|
|
* fm10k_update_hw_stats_tx_q - Updates TX queue statistics counters
|
|
* @hw: pointer to the hardware structure
|
|
* @q: pointer to the ring of hardware statistics queue
|
|
* @idx: index pointing to the start of the ring iteration
|
|
*
|
|
* Function updates the TX queue statistics counters that are related to the
|
|
* hardware.
|
|
**/
|
|
static void fm10k_update_hw_stats_tx_q(struct fm10k_hw *hw,
|
|
struct fm10k_hw_stats_q *q,
|
|
u32 idx)
|
|
{
|
|
u32 id_tx, id_tx_prev, tx_packets;
|
|
u64 tx_bytes = 0;
|
|
|
|
/* Retrieve TX Owner Data */
|
|
id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx));
|
|
|
|
/* Process TX Ring */
|
|
do {
|
|
tx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPTC(idx),
|
|
&q->tx_packets);
|
|
|
|
if (tx_packets)
|
|
tx_bytes = fm10k_read_hw_stats_48b(hw,
|
|
FM10K_QBTC_L(idx),
|
|
&q->tx_bytes);
|
|
|
|
/* Re-Check Owner Data */
|
|
id_tx_prev = id_tx;
|
|
id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx));
|
|
} while ((id_tx ^ id_tx_prev) & FM10K_TXQCTL_ID_MASK);
|
|
|
|
/* drop non-ID bits and set VALID ID bit */
|
|
id_tx &= FM10K_TXQCTL_ID_MASK;
|
|
id_tx |= FM10K_STAT_VALID;
|
|
|
|
/* update packet counts */
|
|
if (q->tx_stats_idx == id_tx) {
|
|
q->tx_packets.count += tx_packets;
|
|
q->tx_bytes.count += tx_bytes;
|
|
}
|
|
|
|
/* update bases and record ID */
|
|
fm10k_update_hw_base_32b(&q->tx_packets, tx_packets);
|
|
fm10k_update_hw_base_48b(&q->tx_bytes, tx_bytes);
|
|
|
|
q->tx_stats_idx = id_tx;
|
|
}
|
|
|
|
/**
|
|
* fm10k_update_hw_stats_rx_q - Updates RX queue statistics counters
|
|
* @hw: pointer to the hardware structure
|
|
* @q: pointer to the ring of hardware statistics queue
|
|
* @idx: index pointing to the start of the ring iteration
|
|
*
|
|
* Function updates the RX queue statistics counters that are related to the
|
|
* hardware.
|
|
**/
|
|
static void fm10k_update_hw_stats_rx_q(struct fm10k_hw *hw,
|
|
struct fm10k_hw_stats_q *q,
|
|
u32 idx)
|
|
{
|
|
u32 id_rx, id_rx_prev, rx_packets, rx_drops;
|
|
u64 rx_bytes = 0;
|
|
|
|
/* Retrieve RX Owner Data */
|
|
id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx));
|
|
|
|
/* Process RX Ring */
|
|
do {
|
|
rx_drops = fm10k_read_hw_stats_32b(hw, FM10K_QPRDC(idx),
|
|
&q->rx_drops);
|
|
|
|
rx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPRC(idx),
|
|
&q->rx_packets);
|
|
|
|
if (rx_packets)
|
|
rx_bytes = fm10k_read_hw_stats_48b(hw,
|
|
FM10K_QBRC_L(idx),
|
|
&q->rx_bytes);
|
|
|
|
/* Re-Check Owner Data */
|
|
id_rx_prev = id_rx;
|
|
id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx));
|
|
} while ((id_rx ^ id_rx_prev) & FM10K_RXQCTL_ID_MASK);
|
|
|
|
/* drop non-ID bits and set VALID ID bit */
|
|
id_rx &= FM10K_RXQCTL_ID_MASK;
|
|
id_rx |= FM10K_STAT_VALID;
|
|
|
|
/* update packet counts */
|
|
if (q->rx_stats_idx == id_rx) {
|
|
q->rx_drops.count += rx_drops;
|
|
q->rx_packets.count += rx_packets;
|
|
q->rx_bytes.count += rx_bytes;
|
|
}
|
|
|
|
/* update bases and record ID */
|
|
fm10k_update_hw_base_32b(&q->rx_drops, rx_drops);
|
|
fm10k_update_hw_base_32b(&q->rx_packets, rx_packets);
|
|
fm10k_update_hw_base_48b(&q->rx_bytes, rx_bytes);
|
|
|
|
q->rx_stats_idx = id_rx;
|
|
}
|
|
|
|
/**
|
|
* fm10k_update_hw_stats_q - Updates queue statistics counters
|
|
* @hw: pointer to the hardware structure
|
|
* @q: pointer to the ring of hardware statistics queue
|
|
* @idx: index pointing to the start of the ring iteration
|
|
* @count: number of queues to iterate over
|
|
*
|
|
* Function updates the queue statistics counters that are related to the
|
|
* hardware.
|
|
**/
|
|
void fm10k_update_hw_stats_q(struct fm10k_hw *hw, struct fm10k_hw_stats_q *q,
|
|
u32 idx, u32 count)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < count; i++, idx++, q++) {
|
|
fm10k_update_hw_stats_tx_q(hw, q, idx);
|
|
fm10k_update_hw_stats_rx_q(hw, q, idx);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* fm10k_unbind_hw_stats_q - Unbind the queue counters from their queues
|
|
* @hw: pointer to the hardware structure
|
|
* @q: pointer to the ring of hardware statistics queue
|
|
* @idx: index pointing to the start of the ring iteration
|
|
* @count: number of queues to iterate over
|
|
*
|
|
* Function invalidates the index values for the queues so any updates that
|
|
* may have happened are ignored and the base for the queue stats is reset.
|
|
**/
|
|
void fm10k_unbind_hw_stats_q(struct fm10k_hw_stats_q *q, u32 idx, u32 count)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < count; i++, idx++, q++) {
|
|
q->rx_stats_idx = 0;
|
|
q->tx_stats_idx = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* fm10k_get_host_state_generic - Returns the state of the host
|
|
* @hw: pointer to hardware structure
|
|
* @host_ready: pointer to boolean value that will record host state
|
|
*
|
|
* This function will check the health of the mailbox and Tx queue 0
|
|
* in order to determine if we should report that the link is up or not.
|
|
**/
|
|
s32 fm10k_get_host_state_generic(struct fm10k_hw *hw, bool *host_ready)
|
|
{
|
|
struct fm10k_mbx_info *mbx = &hw->mbx;
|
|
struct fm10k_mac_info *mac = &hw->mac;
|
|
s32 ret_val = 0;
|
|
u32 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(0));
|
|
|
|
/* process upstream mailbox in case interrupts were disabled */
|
|
mbx->ops.process(hw, mbx);
|
|
|
|
/* If Tx is no longer enabled link should come down */
|
|
if (!(~txdctl) || !(txdctl & FM10K_TXDCTL_ENABLE))
|
|
mac->get_host_state = true;
|
|
|
|
/* exit if not checking for link, or link cannot be changed */
|
|
if (!mac->get_host_state || !(~txdctl))
|
|
goto out;
|
|
|
|
/* if we somehow dropped the Tx enable we should reset */
|
|
if (mac->tx_ready && !(txdctl & FM10K_TXDCTL_ENABLE)) {
|
|
ret_val = FM10K_ERR_RESET_REQUESTED;
|
|
goto out;
|
|
}
|
|
|
|
/* if Mailbox timed out we should request reset */
|
|
if (!mbx->timeout) {
|
|
ret_val = FM10K_ERR_RESET_REQUESTED;
|
|
goto out;
|
|
}
|
|
|
|
/* verify Mailbox is still open */
|
|
if (mbx->state != FM10K_STATE_OPEN)
|
|
goto out;
|
|
|
|
/* interface cannot receive traffic without logical ports */
|
|
if (mac->dglort_map == FM10K_DGLORTMAP_NONE) {
|
|
if (mac->ops.request_lport_map)
|
|
ret_val = mac->ops.request_lport_map(hw);
|
|
|
|
goto out;
|
|
}
|
|
|
|
/* if we passed all the tests above then the switch is ready and we no
|
|
* longer need to check for link
|
|
*/
|
|
mac->get_host_state = false;
|
|
|
|
out:
|
|
*host_ready = !mac->get_host_state;
|
|
return ret_val;
|
|
}
|