![Keck, David](/assets/img/avatar_default.png)
This patch fixes the AMD POGO errata on the hotplug controller where the platform will lock up or reboot if PERR/SERR generation is enabled and a slot is sent an enable command. This fix disables PERR/SERR generation before a slot is sent the enable command by first saving related registers, turning off SERR/PERR generation, enabling the slot, then restoring the registers. Signed-off-by: David Keck <david.keck@amd.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
955 lines
26 KiB
C
955 lines
26 KiB
C
/*
|
|
* Standard Hot Plug Controller Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/pci.h>
|
|
#include "../pci.h"
|
|
#include "shpchp.h"
|
|
|
|
static void interrupt_event_handler(struct controller *ctrl);
|
|
|
|
static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
|
|
static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */
|
|
static int event_finished;
|
|
static unsigned long pushbutton_pending; /* = 0 */
|
|
|
|
u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *) inst_id;
|
|
struct slot *p_slot;
|
|
u8 rc = 0;
|
|
u8 getstatus;
|
|
struct event_info *taskInfo;
|
|
|
|
/* Attention Button Change */
|
|
dbg("shpchp: Attention button interrupt received.\n");
|
|
|
|
/* This is the structure that tells the worker thread what to do */
|
|
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
|
|
ctrl->next_event = (ctrl->next_event + 1) % 10;
|
|
taskInfo->hp_slot = hp_slot;
|
|
|
|
rc++;
|
|
|
|
/*
|
|
* Button pressed - See if need to TAKE ACTION!!!
|
|
*/
|
|
info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_BUTTON_PRESS;
|
|
|
|
if ((p_slot->state == BLINKINGON_STATE)
|
|
|| (p_slot->state == BLINKINGOFF_STATE)) {
|
|
/* Cancel if we are still blinking; this means that we press the
|
|
* attention again before the 5 sec. limit expires to cancel hot-add
|
|
* or hot-remove
|
|
*/
|
|
taskInfo->event_type = INT_BUTTON_CANCEL;
|
|
info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
} else if ((p_slot->state == POWERON_STATE)
|
|
|| (p_slot->state == POWEROFF_STATE)) {
|
|
/* Ignore if the slot is on power-on or power-off state; this
|
|
* means that the previous attention button action to hot-add or
|
|
* hot-remove is undergoing
|
|
*/
|
|
taskInfo->event_type = INT_BUTTON_IGNORE;
|
|
info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
}
|
|
|
|
if (rc)
|
|
up(&event_semaphore); /* signal event thread that new event is posted */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *) inst_id;
|
|
struct slot *p_slot;
|
|
u8 rc = 0;
|
|
u8 getstatus;
|
|
struct event_info *taskInfo;
|
|
|
|
/* Switch Change */
|
|
dbg("shpchp: Switch interrupt received.\n");
|
|
|
|
/* This is the structure that tells the worker thread
|
|
* what to do
|
|
*/
|
|
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
|
|
ctrl->next_event = (ctrl->next_event + 1) % 10;
|
|
taskInfo->hp_slot = hp_slot;
|
|
|
|
rc++;
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
dbg("%s: Card present %x Power status %x\n", __FUNCTION__,
|
|
p_slot->presence_save, p_slot->pwr_save);
|
|
|
|
if (getstatus) {
|
|
/*
|
|
* Switch opened
|
|
*/
|
|
info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_SWITCH_OPEN;
|
|
if (p_slot->pwr_save && p_slot->presence_save) {
|
|
taskInfo->event_type = INT_POWER_FAULT;
|
|
err("Surprise Removal of card\n");
|
|
}
|
|
} else {
|
|
/*
|
|
* Switch closed
|
|
*/
|
|
info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_SWITCH_CLOSE;
|
|
}
|
|
|
|
if (rc)
|
|
up(&event_semaphore); /* signal event thread that new event is posted */
|
|
|
|
return rc;
|
|
}
|
|
|
|
u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *) inst_id;
|
|
struct slot *p_slot;
|
|
u8 rc = 0;
|
|
/*u8 temp_byte;*/
|
|
struct event_info *taskInfo;
|
|
|
|
/* Presence Change */
|
|
dbg("shpchp: Presence/Notify input change.\n");
|
|
|
|
/* This is the structure that tells the worker thread
|
|
* what to do
|
|
*/
|
|
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
|
|
ctrl->next_event = (ctrl->next_event + 1) % 10;
|
|
taskInfo->hp_slot = hp_slot;
|
|
|
|
rc++;
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
/*
|
|
* Save the presence state
|
|
*/
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
|
|
if (p_slot->presence_save) {
|
|
/*
|
|
* Card Present
|
|
*/
|
|
info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_PRESENCE_ON;
|
|
} else {
|
|
/*
|
|
* Not Present
|
|
*/
|
|
info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_PRESENCE_OFF;
|
|
}
|
|
|
|
if (rc)
|
|
up(&event_semaphore); /* signal event thread that new event is posted */
|
|
|
|
return rc;
|
|
}
|
|
|
|
u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *) inst_id;
|
|
struct slot *p_slot;
|
|
u8 rc = 0;
|
|
struct event_info *taskInfo;
|
|
|
|
/* Power fault */
|
|
dbg("shpchp: Power fault interrupt received.\n");
|
|
|
|
/* This is the structure that tells the worker thread
|
|
* what to do
|
|
*/
|
|
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
|
|
ctrl->next_event = (ctrl->next_event + 1) % 10;
|
|
taskInfo->hp_slot = hp_slot;
|
|
|
|
rc++;
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
|
|
/*
|
|
* Power fault Cleared
|
|
*/
|
|
info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
p_slot->status = 0x00;
|
|
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
|
|
} else {
|
|
/*
|
|
* Power fault
|
|
*/
|
|
info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_POWER_FAULT;
|
|
/* set power fault status for this board */
|
|
p_slot->status = 0xFF;
|
|
info("power fault bit %x set\n", hp_slot);
|
|
}
|
|
if (rc)
|
|
up(&event_semaphore); /* signal event thread that new event is posted */
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* The following routines constitute the bulk of the
|
|
hotplug controller logic
|
|
*/
|
|
static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
|
|
enum pci_bus_speed speed)
|
|
{
|
|
int rc = 0;
|
|
|
|
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
|
|
down(&ctrl->crit_sect);
|
|
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
|
|
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
|
|
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
|
|
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
|
|
__FUNCTION__);
|
|
err("%s: Error code (%d)\n", __FUNCTION__, rc);
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
|
|
u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
|
|
enum pci_bus_speed msp)
|
|
{
|
|
int rc = 0;
|
|
|
|
if (flag != 0) { /* Other slots on the same bus are occupied */
|
|
if ( asp < bsp ) {
|
|
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
} else {
|
|
/* Other slots on the same bus are empty */
|
|
if (msp == bsp) {
|
|
/* if adapter_speed >= bus_speed, do nothing */
|
|
if (asp < bsp) {
|
|
/*
|
|
* Try to lower bus speed to accommodate the adapter if other slots
|
|
* on the same controller are empty
|
|
*/
|
|
if ((rc = change_bus_speed(ctrl, pslot, asp)))
|
|
return rc;
|
|
}
|
|
} else {
|
|
if (asp < msp) {
|
|
if ((rc = change_bus_speed(ctrl, pslot, asp)))
|
|
return rc;
|
|
} else {
|
|
if ((rc = change_bus_speed(ctrl, pslot, msp)))
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* board_added - Called after a board has been added to the system.
|
|
*
|
|
* Turns power on for the board
|
|
* Configures board
|
|
*
|
|
*/
|
|
static int board_added(struct slot *p_slot)
|
|
{
|
|
u8 hp_slot;
|
|
u8 slots_not_empty = 0;
|
|
int rc = 0;
|
|
enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
|
|
u8 pi, mode;
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
|
|
hp_slot = p_slot->device - ctrl->slot_device_offset;
|
|
|
|
dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
|
|
__FUNCTION__, p_slot->device,
|
|
ctrl->slot_device_offset, hp_slot);
|
|
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
/* Power on slot without connecting to bus */
|
|
rc = p_slot->hpc_ops->power_on_slot(p_slot);
|
|
if (rc) {
|
|
err("%s: Failed to power on slot\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return -1;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
|
|
if (rc) {
|
|
err("%s: Failed to power on slot, error code(%d)\n", __FUNCTION__, rc);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return -1;
|
|
}
|
|
|
|
|
|
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
|
|
if (slots_not_empty)
|
|
return WRONG_BUS_FREQUENCY;
|
|
|
|
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
|
|
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
|
|
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
|
|
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
|
|
__FUNCTION__);
|
|
err("%s: Error code (%d)\n", __FUNCTION__, rc);
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
/* turn on board, blink green LED, turn off Amber LED */
|
|
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
|
|
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
|
|
err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed);
|
|
/* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */
|
|
/* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC, 0xa = PCI-X 133 Mhz 266, */
|
|
/* 0xd = PCI-X 133 Mhz 533 */
|
|
/* This encoding is different from the one used in cur_bus_speed & */
|
|
/* max_bus_speed */
|
|
|
|
if (rc || adapter_speed == PCI_SPEED_UNKNOWN) {
|
|
err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed);
|
|
if (rc || bus_speed == PCI_SPEED_UNKNOWN) {
|
|
err("%s: Can't get bus operation speed\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed);
|
|
if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) {
|
|
err("%s: Can't get max bus operation speed\n", __FUNCTION__);
|
|
max_bus_speed = bus_speed;
|
|
}
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) {
|
|
err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__);
|
|
pi = 1;
|
|
}
|
|
|
|
/* Check if there are other slots or devices on the same bus */
|
|
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
|
|
slots_not_empty = 1;
|
|
|
|
dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__,
|
|
slots_not_empty, pi);
|
|
dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n",
|
|
adapter_speed, bus_speed, max_bus_speed);
|
|
|
|
if (pi == 2) {
|
|
dbg("%s: In PI = %d\n", __FUNCTION__, pi);
|
|
if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) {
|
|
err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__);
|
|
mode = 0;
|
|
}
|
|
|
|
switch (adapter_speed) {
|
|
case PCI_SPEED_133MHz_PCIX_533:
|
|
case PCI_SPEED_133MHz_PCIX_266:
|
|
if ((bus_speed != adapter_speed) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
break;
|
|
case PCI_SPEED_133MHz_PCIX_ECC:
|
|
case PCI_SPEED_133MHz_PCIX:
|
|
if (mode) { /* Bus - Mode 1 ECC */
|
|
if ((bus_speed != 0x7) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
} else {
|
|
if ((bus_speed != 0x4) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
}
|
|
break;
|
|
case PCI_SPEED_66MHz_PCIX_ECC:
|
|
case PCI_SPEED_66MHz_PCIX:
|
|
if (mode) { /* Bus - Mode 1 ECC */
|
|
if ((bus_speed != 0x5) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
} else {
|
|
if ((bus_speed != 0x2) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
}
|
|
break;
|
|
case PCI_SPEED_66MHz:
|
|
if ((bus_speed != 0x1) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
break;
|
|
case PCI_SPEED_33MHz:
|
|
if (bus_speed > 0x0) {
|
|
if (slots_not_empty == 0) {
|
|
if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed)))
|
|
return rc;
|
|
} else {
|
|
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
} else {
|
|
/* If adpater_speed == bus_speed, nothing to do here */
|
|
dbg("%s: In PI = %d\n", __FUNCTION__, pi);
|
|
if ((adapter_speed != bus_speed) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
}
|
|
|
|
down(&ctrl->crit_sect);
|
|
/* turn on board, blink green LED, turn off Amber LED */
|
|
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
|
|
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
|
|
err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
up(&ctrl->crit_sect);
|
|
|
|
/* Wait for ~1 second */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status);
|
|
/* Check for a power fault */
|
|
if (p_slot->status == 0xFF) {
|
|
/* power fault occurred, but it was benign */
|
|
dbg("%s: power fault\n", __FUNCTION__);
|
|
rc = POWER_FAILURE;
|
|
p_slot->status = 0;
|
|
goto err_exit;
|
|
}
|
|
|
|
if (shpchp_configure_device(p_slot)) {
|
|
err("Cannot add device at 0x%x:0x%x\n", p_slot->bus,
|
|
p_slot->device);
|
|
goto err_exit;
|
|
}
|
|
|
|
p_slot->status = 0;
|
|
p_slot->is_a_board = 0x01;
|
|
p_slot->pwr_save = 1;
|
|
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->green_led_on(p_slot);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
return 0;
|
|
|
|
err_exit:
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
/* turn off slot, turn on Amber LED, turn off Green LED */
|
|
rc = p_slot->hpc_ops->slot_disable(p_slot);
|
|
if (rc) {
|
|
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
|
|
if (rc) {
|
|
err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/**
|
|
* remove_board - Turns off slot and LED's
|
|
*
|
|
*/
|
|
static int remove_board(struct slot *p_slot)
|
|
{
|
|
struct controller *ctrl = p_slot->ctrl;
|
|
u8 hp_slot;
|
|
int rc;
|
|
|
|
if (shpchp_unconfigure_device(p_slot))
|
|
return(1);
|
|
|
|
hp_slot = p_slot->device - ctrl->slot_device_offset;
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
|
|
|
|
/* Change status to shutdown */
|
|
if (p_slot->is_a_board)
|
|
p_slot->status = 0x01;
|
|
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
/* turn off slot, turn on Amber LED, turn off Green LED */
|
|
rc = p_slot->hpc_ops->slot_disable(p_slot);
|
|
if (rc) {
|
|
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
|
|
if (rc) {
|
|
err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
if (rc) {
|
|
err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
p_slot->pwr_save = 0;
|
|
p_slot->is_a_board = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void pushbutton_helper_thread (unsigned long data)
|
|
{
|
|
pushbutton_pending = data;
|
|
|
|
up(&event_semaphore);
|
|
}
|
|
|
|
|
|
/**
|
|
* shpchp_pushbutton_thread
|
|
*
|
|
* Scheduled procedure to handle blocking stuff for the pushbuttons
|
|
* Handles all pending events and exits.
|
|
*
|
|
*/
|
|
static void shpchp_pushbutton_thread (unsigned long slot)
|
|
{
|
|
struct slot *p_slot = (struct slot *) slot;
|
|
u8 getstatus;
|
|
|
|
pushbutton_pending = 0;
|
|
|
|
if (!p_slot) {
|
|
dbg("%s: Error! slot NULL\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (getstatus) {
|
|
p_slot->state = POWEROFF_STATE;
|
|
|
|
shpchp_disable_slot(p_slot);
|
|
p_slot->state = STATIC_STATE;
|
|
} else {
|
|
p_slot->state = POWERON_STATE;
|
|
|
|
if (shpchp_enable_slot(p_slot)) {
|
|
/* Wait for exclusive access to hardware */
|
|
down(&p_slot->ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&p_slot->ctrl->crit_sect);
|
|
}
|
|
p_slot->state = STATIC_STATE;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/* this is the main worker thread */
|
|
static int event_thread(void* data)
|
|
{
|
|
struct controller *ctrl;
|
|
lock_kernel();
|
|
daemonize("shpchpd_event");
|
|
unlock_kernel();
|
|
|
|
while (1) {
|
|
dbg("!!!!event_thread sleeping\n");
|
|
down_interruptible (&event_semaphore);
|
|
dbg("event_thread woken finished = %d\n", event_finished);
|
|
if (event_finished || signal_pending(current))
|
|
break;
|
|
/* Do stuff here */
|
|
if (pushbutton_pending)
|
|
shpchp_pushbutton_thread(pushbutton_pending);
|
|
else
|
|
for (ctrl = shpchp_ctrl_list; ctrl; ctrl=ctrl->next)
|
|
interrupt_event_handler(ctrl);
|
|
}
|
|
dbg("event_thread signals exit\n");
|
|
up(&event_exit);
|
|
return 0;
|
|
}
|
|
|
|
int shpchp_event_start_thread (void)
|
|
{
|
|
int pid;
|
|
|
|
/* initialize our semaphores */
|
|
init_MUTEX_LOCKED(&event_exit);
|
|
event_finished=0;
|
|
|
|
init_MUTEX_LOCKED(&event_semaphore);
|
|
pid = kernel_thread(event_thread, NULL, 0);
|
|
|
|
if (pid < 0) {
|
|
err ("Can't start up our event thread\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
void shpchp_event_stop_thread (void)
|
|
{
|
|
event_finished = 1;
|
|
up(&event_semaphore);
|
|
down(&event_exit);
|
|
}
|
|
|
|
|
|
static int update_slot_info (struct slot *slot)
|
|
{
|
|
struct hotplug_slot_info *info;
|
|
int result;
|
|
|
|
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
slot->hpc_ops->get_power_status(slot, &(info->power_status));
|
|
slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
|
|
slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
|
|
slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
|
|
|
|
result = pci_hp_change_slot_info(slot->hotplug_slot, info);
|
|
kfree (info);
|
|
return result;
|
|
}
|
|
|
|
static void interrupt_event_handler(struct controller *ctrl)
|
|
{
|
|
int loop = 0;
|
|
int change = 1;
|
|
u8 hp_slot;
|
|
u8 getstatus;
|
|
struct slot *p_slot;
|
|
|
|
while (change) {
|
|
change = 0;
|
|
|
|
for (loop = 0; loop < 10; loop++) {
|
|
if (ctrl->event_queue[loop].event_type != 0) {
|
|
dbg("%s:loop %x event_type %x\n", __FUNCTION__, loop,
|
|
ctrl->event_queue[loop].event_type);
|
|
hp_slot = ctrl->event_queue[loop].hp_slot;
|
|
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) {
|
|
dbg("%s: button cancel\n", __FUNCTION__);
|
|
del_timer(&p_slot->task_event);
|
|
|
|
switch (p_slot->state) {
|
|
case BLINKINGOFF_STATE:
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->green_led_on(p_slot);
|
|
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
break;
|
|
case BLINKINGON_STATE:
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
break;
|
|
default:
|
|
warn("Not a valid state\n");
|
|
return;
|
|
}
|
|
info(msg_button_cancel, p_slot->number);
|
|
p_slot->state = STATIC_STATE;
|
|
} else if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
|
|
/* Button Pressed (No action on 1st press...) */
|
|
dbg("%s: Button pressed\n", __FUNCTION__);
|
|
|
|
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (getstatus) {
|
|
/* slot is on */
|
|
dbg("%s: slot is on\n", __FUNCTION__);
|
|
p_slot->state = BLINKINGOFF_STATE;
|
|
info(msg_button_off, p_slot->number);
|
|
} else {
|
|
/* slot is off */
|
|
dbg("%s: slot is off\n", __FUNCTION__);
|
|
p_slot->state = BLINKINGON_STATE;
|
|
info(msg_button_on, p_slot->number);
|
|
}
|
|
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
/* blink green LED and turn off amber */
|
|
p_slot->hpc_ops->green_led_blink(p_slot);
|
|
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
init_timer(&p_slot->task_event);
|
|
p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */
|
|
p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread;
|
|
p_slot->task_event.data = (unsigned long) p_slot;
|
|
|
|
dbg("%s: add_timer p_slot = %p\n", __FUNCTION__,(void *) p_slot);
|
|
add_timer(&p_slot->task_event);
|
|
} else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
|
|
/***********POWER FAULT********************/
|
|
dbg("%s: power fault\n", __FUNCTION__);
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 1);
|
|
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
} else {
|
|
/* refresh notification */
|
|
if (p_slot)
|
|
update_slot_info(p_slot);
|
|
}
|
|
|
|
ctrl->event_queue[loop].event_type = 0;
|
|
|
|
change = 1;
|
|
}
|
|
} /* End of FOR loop */
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
int shpchp_enable_slot (struct slot *p_slot)
|
|
{
|
|
u8 getstatus = 0;
|
|
int rc;
|
|
|
|
/* Check to see if (latch closed, card present, power off) */
|
|
down(&p_slot->ctrl->crit_sect);
|
|
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
|
|
if (rc || !getstatus) {
|
|
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
if (rc || getstatus) {
|
|
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (rc || getstatus) {
|
|
info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
up(&p_slot->ctrl->crit_sect);
|
|
|
|
p_slot->is_a_board = 1;
|
|
|
|
/* We have to save the presence info for these slots */
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
|
|
p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save));
|
|
dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
|
|
if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
|
|
(p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458))
|
|
&& p_slot->ctrl->num_slots == 1) {
|
|
/* handle amd pogo errata; this must be done before enable */
|
|
amd_pogo_errata_save_misc_reg(p_slot);
|
|
rc = board_added(p_slot);
|
|
/* handle amd pogo errata; this must be done after enable */
|
|
amd_pogo_errata_restore_misc_reg(p_slot);
|
|
} else
|
|
rc = board_added(p_slot);
|
|
|
|
if (rc) {
|
|
p_slot->hpc_ops->get_adapter_status(p_slot,
|
|
&(p_slot->presence_save));
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
}
|
|
|
|
update_slot_info(p_slot);
|
|
return rc;
|
|
}
|
|
|
|
|
|
int shpchp_disable_slot (struct slot *p_slot)
|
|
{
|
|
u8 getstatus = 0;
|
|
int ret = 0;
|
|
|
|
if (!p_slot->ctrl)
|
|
return -ENODEV;
|
|
|
|
/* Check to see if (latch closed, card present, power on) */
|
|
down(&p_slot->ctrl->crit_sect);
|
|
|
|
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
|
|
if (ret || !getstatus) {
|
|
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
if (ret || getstatus) {
|
|
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (ret || !getstatus) {
|
|
info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
up(&p_slot->ctrl->crit_sect);
|
|
|
|
ret = remove_board(p_slot);
|
|
update_slot_info(p_slot);
|
|
return ret;
|
|
}
|
|
|