![Linus Torvalds](/assets/img/avatar_default.png)
Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJVK/X+AAoJEFmIoMA60/r8hlkP/0e1GhAWA3DGR/+O2OPIkJ2w dQVgv5IN5KXGExT9RHiDL/Ib2PhDvdVI26sinjtkw/FcjyzoWVsPDUzCYudQaPSr zwzZto7dBzfv+exDN2LOqoSscCORAehApmTgYVg29cofJmKlO2ctDtpem1OT0MQ9 CMRMoBHhRe4FF3VJPOBPDXYpS89TObrY600aMDGk4S2uBboZI3aeYiTNLXJyh6fX vRg3TWnTfQHoZINW/YOqao/WbrRixZbO6q4n2IqhI6i/uaAc1IEALk9im8/2ri/s mgb/K5Elq+j4yUGnbFRz62pj/YxwnQKwVO4Nc7P66zENgoOXtv+OGRhlS4+d00/n ux0+BkoxJdaL8HQ/b7+uPydiD85lbERM+B2+LQQ7JN+HI+UEcQ0PsK2hSQKb3njD uEkktlKZViiqALijpL+vKRFe8U4GRE4KUfVsKHhhPPvY5sQTAZ3DrR36e1zKz2pA YJjtaHYW0S/tfoEzi3EnPistbJw5sT0/Waj31QTKb/P0Fr7pHnJfcwV7+unXbKla Osz8m6ELIqxhnuzhjlbayh4MKn49n1ZlwkwCnBdjgLQy0KZtxsWZoBg8LeGU077c TJXukRfl3H8LvpqGMYaxOyw7yUeKobEWy+Ylo5asFnfFw9h6zvW+Sc97jtBCrm4/ OZa7rKdPQGGMbQFMvDc2 =vEVs -----END PGP SIGNATURE----- Merge tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)" * tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits) PCI: Read capability list as dwords, not bytes PCI: layerscape: Simplify platform_get_resource_byname() failure checking PCI: keystone: Don't dereference possible NULL pointer PCI: versatile: Check for devm_ioremap_resource() failures PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message PCI: exynos: Fix INTx enablement statement termination error PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules PCI: Add ACS quirks for Intel 1G NICs PCI: mvebu: Add suspend/resume support PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Fail pci_ioremap_bar() on unassigned resources ...
717 lines
18 KiB
C
717 lines
18 KiB
C
/*
|
|
* File: pci-acpi.c
|
|
* Purpose: Provide PCI support in ACPI
|
|
*
|
|
* Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com>
|
|
* Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com>
|
|
* Copyright (C) 2004 Intel Corp.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_hotplug.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci-aspm.h>
|
|
#include <linux/pci-acpi.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/pm_qos.h>
|
|
#include "pci.h"
|
|
|
|
/*
|
|
* The UUID is defined in the PCI Firmware Specification available here:
|
|
* https://www.pcisig.com/members/downloads/pcifw_r3_1_13Dec10.pdf
|
|
*/
|
|
const u8 pci_acpi_dsm_uuid[] = {
|
|
0xd0, 0x37, 0xc9, 0xe5, 0x53, 0x35, 0x7a, 0x4d,
|
|
0x91, 0x17, 0xea, 0x4d, 0x19, 0xc3, 0x43, 0x4d
|
|
};
|
|
|
|
phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
|
|
{
|
|
acpi_status status = AE_NOT_EXIST;
|
|
unsigned long long mcfg_addr;
|
|
|
|
if (handle)
|
|
status = acpi_evaluate_integer(handle, METHOD_NAME__CBA,
|
|
NULL, &mcfg_addr);
|
|
if (ACPI_FAILURE(status))
|
|
return 0;
|
|
|
|
return (phys_addr_t)mcfg_addr;
|
|
}
|
|
|
|
static acpi_status decode_type0_hpx_record(union acpi_object *record,
|
|
struct hotplug_params *hpx)
|
|
{
|
|
int i;
|
|
union acpi_object *fields = record->package.elements;
|
|
u32 revision = fields[1].integer.value;
|
|
|
|
switch (revision) {
|
|
case 1:
|
|
if (record->package.count != 6)
|
|
return AE_ERROR;
|
|
for (i = 2; i < 6; i++)
|
|
if (fields[i].type != ACPI_TYPE_INTEGER)
|
|
return AE_ERROR;
|
|
hpx->t0 = &hpx->type0_data;
|
|
hpx->t0->revision = revision;
|
|
hpx->t0->cache_line_size = fields[2].integer.value;
|
|
hpx->t0->latency_timer = fields[3].integer.value;
|
|
hpx->t0->enable_serr = fields[4].integer.value;
|
|
hpx->t0->enable_perr = fields[5].integer.value;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING
|
|
"%s: Type 0 Revision %d record not supported\n",
|
|
__func__, revision);
|
|
return AE_ERROR;
|
|
}
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status decode_type1_hpx_record(union acpi_object *record,
|
|
struct hotplug_params *hpx)
|
|
{
|
|
int i;
|
|
union acpi_object *fields = record->package.elements;
|
|
u32 revision = fields[1].integer.value;
|
|
|
|
switch (revision) {
|
|
case 1:
|
|
if (record->package.count != 5)
|
|
return AE_ERROR;
|
|
for (i = 2; i < 5; i++)
|
|
if (fields[i].type != ACPI_TYPE_INTEGER)
|
|
return AE_ERROR;
|
|
hpx->t1 = &hpx->type1_data;
|
|
hpx->t1->revision = revision;
|
|
hpx->t1->max_mem_read = fields[2].integer.value;
|
|
hpx->t1->avg_max_split = fields[3].integer.value;
|
|
hpx->t1->tot_max_split = fields[4].integer.value;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING
|
|
"%s: Type 1 Revision %d record not supported\n",
|
|
__func__, revision);
|
|
return AE_ERROR;
|
|
}
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status decode_type2_hpx_record(union acpi_object *record,
|
|
struct hotplug_params *hpx)
|
|
{
|
|
int i;
|
|
union acpi_object *fields = record->package.elements;
|
|
u32 revision = fields[1].integer.value;
|
|
|
|
switch (revision) {
|
|
case 1:
|
|
if (record->package.count != 18)
|
|
return AE_ERROR;
|
|
for (i = 2; i < 18; i++)
|
|
if (fields[i].type != ACPI_TYPE_INTEGER)
|
|
return AE_ERROR;
|
|
hpx->t2 = &hpx->type2_data;
|
|
hpx->t2->revision = revision;
|
|
hpx->t2->unc_err_mask_and = fields[2].integer.value;
|
|
hpx->t2->unc_err_mask_or = fields[3].integer.value;
|
|
hpx->t2->unc_err_sever_and = fields[4].integer.value;
|
|
hpx->t2->unc_err_sever_or = fields[5].integer.value;
|
|
hpx->t2->cor_err_mask_and = fields[6].integer.value;
|
|
hpx->t2->cor_err_mask_or = fields[7].integer.value;
|
|
hpx->t2->adv_err_cap_and = fields[8].integer.value;
|
|
hpx->t2->adv_err_cap_or = fields[9].integer.value;
|
|
hpx->t2->pci_exp_devctl_and = fields[10].integer.value;
|
|
hpx->t2->pci_exp_devctl_or = fields[11].integer.value;
|
|
hpx->t2->pci_exp_lnkctl_and = fields[12].integer.value;
|
|
hpx->t2->pci_exp_lnkctl_or = fields[13].integer.value;
|
|
hpx->t2->sec_unc_err_sever_and = fields[14].integer.value;
|
|
hpx->t2->sec_unc_err_sever_or = fields[15].integer.value;
|
|
hpx->t2->sec_unc_err_mask_and = fields[16].integer.value;
|
|
hpx->t2->sec_unc_err_mask_or = fields[17].integer.value;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING
|
|
"%s: Type 2 Revision %d record not supported\n",
|
|
__func__, revision);
|
|
return AE_ERROR;
|
|
}
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status acpi_run_hpx(acpi_handle handle, struct hotplug_params *hpx)
|
|
{
|
|
acpi_status status;
|
|
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
|
|
union acpi_object *package, *record, *fields;
|
|
u32 type;
|
|
int i;
|
|
|
|
/* Clear the return buffer with zeros */
|
|
memset(hpx, 0, sizeof(struct hotplug_params));
|
|
|
|
status = acpi_evaluate_object(handle, "_HPX", NULL, &buffer);
|
|
if (ACPI_FAILURE(status))
|
|
return status;
|
|
|
|
package = (union acpi_object *)buffer.pointer;
|
|
if (package->type != ACPI_TYPE_PACKAGE) {
|
|
status = AE_ERROR;
|
|
goto exit;
|
|
}
|
|
|
|
for (i = 0; i < package->package.count; i++) {
|
|
record = &package->package.elements[i];
|
|
if (record->type != ACPI_TYPE_PACKAGE) {
|
|
status = AE_ERROR;
|
|
goto exit;
|
|
}
|
|
|
|
fields = record->package.elements;
|
|
if (fields[0].type != ACPI_TYPE_INTEGER ||
|
|
fields[1].type != ACPI_TYPE_INTEGER) {
|
|
status = AE_ERROR;
|
|
goto exit;
|
|
}
|
|
|
|
type = fields[0].integer.value;
|
|
switch (type) {
|
|
case 0:
|
|
status = decode_type0_hpx_record(record, hpx);
|
|
if (ACPI_FAILURE(status))
|
|
goto exit;
|
|
break;
|
|
case 1:
|
|
status = decode_type1_hpx_record(record, hpx);
|
|
if (ACPI_FAILURE(status))
|
|
goto exit;
|
|
break;
|
|
case 2:
|
|
status = decode_type2_hpx_record(record, hpx);
|
|
if (ACPI_FAILURE(status))
|
|
goto exit;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "%s: Type %d record not supported\n",
|
|
__func__, type);
|
|
status = AE_ERROR;
|
|
goto exit;
|
|
}
|
|
}
|
|
exit:
|
|
kfree(buffer.pointer);
|
|
return status;
|
|
}
|
|
|
|
static acpi_status acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
|
|
{
|
|
acpi_status status;
|
|
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
|
|
union acpi_object *package, *fields;
|
|
int i;
|
|
|
|
memset(hpp, 0, sizeof(struct hotplug_params));
|
|
|
|
status = acpi_evaluate_object(handle, "_HPP", NULL, &buffer);
|
|
if (ACPI_FAILURE(status))
|
|
return status;
|
|
|
|
package = (union acpi_object *) buffer.pointer;
|
|
if (package->type != ACPI_TYPE_PACKAGE ||
|
|
package->package.count != 4) {
|
|
status = AE_ERROR;
|
|
goto exit;
|
|
}
|
|
|
|
fields = package->package.elements;
|
|
for (i = 0; i < 4; i++) {
|
|
if (fields[i].type != ACPI_TYPE_INTEGER) {
|
|
status = AE_ERROR;
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
hpp->t0 = &hpp->type0_data;
|
|
hpp->t0->revision = 1;
|
|
hpp->t0->cache_line_size = fields[0].integer.value;
|
|
hpp->t0->latency_timer = fields[1].integer.value;
|
|
hpp->t0->enable_serr = fields[2].integer.value;
|
|
hpp->t0->enable_perr = fields[3].integer.value;
|
|
|
|
exit:
|
|
kfree(buffer.pointer);
|
|
return status;
|
|
}
|
|
|
|
/* pci_get_hp_params
|
|
*
|
|
* @dev - the pci_dev for which we want parameters
|
|
* @hpp - allocated by the caller
|
|
*/
|
|
int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp)
|
|
{
|
|
acpi_status status;
|
|
acpi_handle handle, phandle;
|
|
struct pci_bus *pbus;
|
|
|
|
if (acpi_pci_disabled)
|
|
return -ENODEV;
|
|
|
|
handle = NULL;
|
|
for (pbus = dev->bus; pbus; pbus = pbus->parent) {
|
|
handle = acpi_pci_get_bridge_handle(pbus);
|
|
if (handle)
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* _HPP settings apply to all child buses, until another _HPP is
|
|
* encountered. If we don't find an _HPP for the input pci dev,
|
|
* look for it in the parent device scope since that would apply to
|
|
* this pci dev.
|
|
*/
|
|
while (handle) {
|
|
status = acpi_run_hpx(handle, hpp);
|
|
if (ACPI_SUCCESS(status))
|
|
return 0;
|
|
status = acpi_run_hpp(handle, hpp);
|
|
if (ACPI_SUCCESS(status))
|
|
return 0;
|
|
if (acpi_is_root_bridge(handle))
|
|
break;
|
|
status = acpi_get_parent(handle, &phandle);
|
|
if (ACPI_FAILURE(status))
|
|
break;
|
|
handle = phandle;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_get_hp_params);
|
|
|
|
/**
|
|
* pci_acpi_wake_bus - Root bus wakeup notification fork function.
|
|
* @work: Work item to handle.
|
|
*/
|
|
static void pci_acpi_wake_bus(struct work_struct *work)
|
|
{
|
|
struct acpi_device *adev;
|
|
struct acpi_pci_root *root;
|
|
|
|
adev = container_of(work, struct acpi_device, wakeup.context.work);
|
|
root = acpi_driver_data(adev);
|
|
pci_pme_wakeup_bus(root->bus);
|
|
}
|
|
|
|
/**
|
|
* pci_acpi_wake_dev - PCI device wakeup notification work function.
|
|
* @handle: ACPI handle of a device the notification is for.
|
|
* @work: Work item to handle.
|
|
*/
|
|
static void pci_acpi_wake_dev(struct work_struct *work)
|
|
{
|
|
struct acpi_device_wakeup_context *context;
|
|
struct pci_dev *pci_dev;
|
|
|
|
context = container_of(work, struct acpi_device_wakeup_context, work);
|
|
pci_dev = to_pci_dev(context->dev);
|
|
|
|
if (pci_dev->pme_poll)
|
|
pci_dev->pme_poll = false;
|
|
|
|
if (pci_dev->current_state == PCI_D3cold) {
|
|
pci_wakeup_event(pci_dev);
|
|
pm_runtime_resume(&pci_dev->dev);
|
|
return;
|
|
}
|
|
|
|
/* Clear PME Status if set. */
|
|
if (pci_dev->pme_support)
|
|
pci_check_pme_status(pci_dev);
|
|
|
|
pci_wakeup_event(pci_dev);
|
|
pm_runtime_resume(&pci_dev->dev);
|
|
|
|
pci_pme_wakeup_bus(pci_dev->subordinate);
|
|
}
|
|
|
|
/**
|
|
* pci_acpi_add_bus_pm_notifier - Register PM notifier for root PCI bus.
|
|
* @dev: PCI root bridge ACPI device.
|
|
*/
|
|
acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev)
|
|
{
|
|
return acpi_add_pm_notifier(dev, NULL, pci_acpi_wake_bus);
|
|
}
|
|
|
|
/**
|
|
* pci_acpi_add_pm_notifier - Register PM notifier for given PCI device.
|
|
* @dev: ACPI device to add the notifier for.
|
|
* @pci_dev: PCI device to check for the PME status if an event is signaled.
|
|
*/
|
|
acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
|
|
struct pci_dev *pci_dev)
|
|
{
|
|
return acpi_add_pm_notifier(dev, &pci_dev->dev, pci_acpi_wake_dev);
|
|
}
|
|
|
|
/*
|
|
* _SxD returns the D-state with the highest power
|
|
* (lowest D-state number) supported in the S-state "x".
|
|
*
|
|
* If the devices does not have a _PRW
|
|
* (Power Resources for Wake) supporting system wakeup from "x"
|
|
* then the OS is free to choose a lower power (higher number
|
|
* D-state) than the return value from _SxD.
|
|
*
|
|
* But if _PRW is enabled at S-state "x", the OS
|
|
* must not choose a power lower than _SxD --
|
|
* unless the device has an _SxW method specifying
|
|
* the lowest power (highest D-state number) the device
|
|
* may enter while still able to wake the system.
|
|
*
|
|
* ie. depending on global OS policy:
|
|
*
|
|
* if (_PRW at S-state x)
|
|
* choose from highest power _SxD to lowest power _SxW
|
|
* else // no _PRW at S-state x
|
|
* choose highest power _SxD or any lower power
|
|
*/
|
|
|
|
static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
|
|
{
|
|
int acpi_state, d_max;
|
|
|
|
if (pdev->no_d3cold)
|
|
d_max = ACPI_STATE_D3_HOT;
|
|
else
|
|
d_max = ACPI_STATE_D3_COLD;
|
|
acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL, d_max);
|
|
if (acpi_state < 0)
|
|
return PCI_POWER_ERROR;
|
|
|
|
switch (acpi_state) {
|
|
case ACPI_STATE_D0:
|
|
return PCI_D0;
|
|
case ACPI_STATE_D1:
|
|
return PCI_D1;
|
|
case ACPI_STATE_D2:
|
|
return PCI_D2;
|
|
case ACPI_STATE_D3_HOT:
|
|
return PCI_D3hot;
|
|
case ACPI_STATE_D3_COLD:
|
|
return PCI_D3cold;
|
|
}
|
|
return PCI_POWER_ERROR;
|
|
}
|
|
|
|
static bool acpi_pci_power_manageable(struct pci_dev *dev)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
|
|
return adev ? acpi_device_power_manageable(adev) : false;
|
|
}
|
|
|
|
static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
|
|
static const u8 state_conv[] = {
|
|
[PCI_D0] = ACPI_STATE_D0,
|
|
[PCI_D1] = ACPI_STATE_D1,
|
|
[PCI_D2] = ACPI_STATE_D2,
|
|
[PCI_D3hot] = ACPI_STATE_D3_COLD,
|
|
[PCI_D3cold] = ACPI_STATE_D3_COLD,
|
|
};
|
|
int error = -EINVAL;
|
|
|
|
/* If the ACPI device has _EJ0, ignore the device */
|
|
if (!adev || acpi_has_method(adev->handle, "_EJ0"))
|
|
return -ENODEV;
|
|
|
|
switch (state) {
|
|
case PCI_D3cold:
|
|
if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) ==
|
|
PM_QOS_FLAGS_ALL) {
|
|
error = -EBUSY;
|
|
break;
|
|
}
|
|
case PCI_D0:
|
|
case PCI_D1:
|
|
case PCI_D2:
|
|
case PCI_D3hot:
|
|
error = acpi_device_set_power(adev, state_conv[state]);
|
|
}
|
|
|
|
if (!error)
|
|
dev_dbg(&dev->dev, "power state changed by ACPI to %s\n",
|
|
acpi_power_state_string(state_conv[state]));
|
|
|
|
return error;
|
|
}
|
|
|
|
static bool acpi_pci_can_wakeup(struct pci_dev *dev)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
|
|
return adev ? acpi_device_can_wakeup(adev) : false;
|
|
}
|
|
|
|
static void acpi_pci_propagate_wakeup_enable(struct pci_bus *bus, bool enable)
|
|
{
|
|
while (bus->parent) {
|
|
if (!acpi_pm_device_sleep_wake(&bus->self->dev, enable))
|
|
return;
|
|
bus = bus->parent;
|
|
}
|
|
|
|
/* We have reached the root bus. */
|
|
if (bus->bridge)
|
|
acpi_pm_device_sleep_wake(bus->bridge, enable);
|
|
}
|
|
|
|
static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
|
|
{
|
|
if (acpi_pci_can_wakeup(dev))
|
|
return acpi_pm_device_sleep_wake(&dev->dev, enable);
|
|
|
|
acpi_pci_propagate_wakeup_enable(dev->bus, enable);
|
|
return 0;
|
|
}
|
|
|
|
static void acpi_pci_propagate_run_wake(struct pci_bus *bus, bool enable)
|
|
{
|
|
while (bus->parent) {
|
|
struct pci_dev *bridge = bus->self;
|
|
|
|
if (bridge->pme_interrupt)
|
|
return;
|
|
if (!acpi_pm_device_run_wake(&bridge->dev, enable))
|
|
return;
|
|
bus = bus->parent;
|
|
}
|
|
|
|
/* We have reached the root bus. */
|
|
if (bus->bridge)
|
|
acpi_pm_device_run_wake(bus->bridge, enable);
|
|
}
|
|
|
|
static int acpi_pci_run_wake(struct pci_dev *dev, bool enable)
|
|
{
|
|
/*
|
|
* Per PCI Express Base Specification Revision 2.0 section
|
|
* 5.3.3.2 Link Wakeup, platform support is needed for D3cold
|
|
* waking up to power on the main link even if there is PME
|
|
* support for D3cold
|
|
*/
|
|
if (dev->pme_interrupt && !dev->runtime_d3cold)
|
|
return 0;
|
|
|
|
if (!acpi_pm_device_run_wake(&dev->dev, enable))
|
|
return 0;
|
|
|
|
acpi_pci_propagate_run_wake(dev->bus, enable);
|
|
return 0;
|
|
}
|
|
|
|
static bool acpi_pci_need_resume(struct pci_dev *dev)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
|
|
|
|
if (!adev || !acpi_device_power_manageable(adev))
|
|
return false;
|
|
|
|
if (device_may_wakeup(&dev->dev) != !!adev->wakeup.prepare_count)
|
|
return true;
|
|
|
|
if (acpi_target_system_state() == ACPI_STATE_S0)
|
|
return false;
|
|
|
|
return !!adev->power.flags.dsw_present;
|
|
}
|
|
|
|
static struct pci_platform_pm_ops acpi_pci_platform_pm = {
|
|
.is_manageable = acpi_pci_power_manageable,
|
|
.set_state = acpi_pci_set_power_state,
|
|
.choose_state = acpi_pci_choose_state,
|
|
.sleep_wake = acpi_pci_sleep_wake,
|
|
.run_wake = acpi_pci_run_wake,
|
|
.need_resume = acpi_pci_need_resume,
|
|
};
|
|
|
|
void acpi_pci_add_bus(struct pci_bus *bus)
|
|
{
|
|
union acpi_object *obj;
|
|
struct pci_host_bridge *bridge;
|
|
|
|
if (acpi_pci_disabled || !bus->bridge)
|
|
return;
|
|
|
|
acpi_pci_slot_enumerate(bus);
|
|
acpiphp_enumerate_slots(bus);
|
|
|
|
/*
|
|
* For a host bridge, check its _DSM for function 8 and if
|
|
* that is available, mark it in pci_host_bridge.
|
|
*/
|
|
if (!pci_is_root_bus(bus))
|
|
return;
|
|
|
|
obj = acpi_evaluate_dsm(ACPI_HANDLE(bus->bridge), pci_acpi_dsm_uuid, 3,
|
|
RESET_DELAY_DSM, NULL);
|
|
if (!obj)
|
|
return;
|
|
|
|
if (obj->type == ACPI_TYPE_INTEGER && obj->integer.value == 1) {
|
|
bridge = pci_find_host_bridge(bus);
|
|
bridge->ignore_reset_delay = 1;
|
|
}
|
|
ACPI_FREE(obj);
|
|
}
|
|
|
|
void acpi_pci_remove_bus(struct pci_bus *bus)
|
|
{
|
|
if (acpi_pci_disabled || !bus->bridge)
|
|
return;
|
|
|
|
acpiphp_remove_slots(bus);
|
|
acpi_pci_slot_remove(bus);
|
|
}
|
|
|
|
/* ACPI bus type */
|
|
static struct acpi_device *acpi_pci_find_companion(struct device *dev)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
bool check_children;
|
|
u64 addr;
|
|
|
|
check_children = pci_is_bridge(pci_dev);
|
|
/* Please ref to ACPI spec for the syntax of _ADR */
|
|
addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
|
|
return acpi_find_child_device(ACPI_COMPANION(dev->parent), addr,
|
|
check_children);
|
|
}
|
|
|
|
/**
|
|
* pci_acpi_optimize_delay - optimize PCI D3 and D3cold delay from ACPI
|
|
* @pdev: the PCI device whose delay is to be updated
|
|
* @adev: the companion ACPI device of this PCI device
|
|
*
|
|
* Update the d3_delay and d3cold_delay of a PCI device from the ACPI _DSM
|
|
* control method of either the device itself or the PCI host bridge.
|
|
*
|
|
* Function 8, "Reset Delay," applies to the entire hierarchy below a PCI
|
|
* host bridge. If it returns one, the OS may assume that all devices in
|
|
* the hierarchy have already completed power-on reset delays.
|
|
*
|
|
* Function 9, "Device Readiness Durations," applies only to the object
|
|
* where it is located. It returns delay durations required after various
|
|
* events if the device requires less time than the spec requires. Delays
|
|
* from this function take precedence over the Reset Delay function.
|
|
*
|
|
* These _DSM functions are defined by the draft ECN of January 28, 2014,
|
|
* titled "ACPI additions for FW latency optimizations."
|
|
*/
|
|
static void pci_acpi_optimize_delay(struct pci_dev *pdev,
|
|
acpi_handle handle)
|
|
{
|
|
struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);
|
|
int value;
|
|
union acpi_object *obj, *elements;
|
|
|
|
if (bridge->ignore_reset_delay)
|
|
pdev->d3cold_delay = 0;
|
|
|
|
obj = acpi_evaluate_dsm(handle, pci_acpi_dsm_uuid, 3,
|
|
FUNCTION_DELAY_DSM, NULL);
|
|
if (!obj)
|
|
return;
|
|
|
|
if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 5) {
|
|
elements = obj->package.elements;
|
|
if (elements[0].type == ACPI_TYPE_INTEGER) {
|
|
value = (int)elements[0].integer.value / 1000;
|
|
if (value < PCI_PM_D3COLD_WAIT)
|
|
pdev->d3cold_delay = value;
|
|
}
|
|
if (elements[3].type == ACPI_TYPE_INTEGER) {
|
|
value = (int)elements[3].integer.value / 1000;
|
|
if (value < PCI_PM_D3_WAIT)
|
|
pdev->d3_delay = value;
|
|
}
|
|
}
|
|
ACPI_FREE(obj);
|
|
}
|
|
|
|
static void pci_acpi_setup(struct device *dev)
|
|
{
|
|
struct pci_dev *pci_dev = to_pci_dev(dev);
|
|
struct acpi_device *adev = ACPI_COMPANION(dev);
|
|
|
|
if (!adev)
|
|
return;
|
|
|
|
pci_acpi_optimize_delay(pci_dev, adev->handle);
|
|
|
|
pci_acpi_add_pm_notifier(adev, pci_dev);
|
|
if (!adev->wakeup.flags.valid)
|
|
return;
|
|
|
|
device_set_wakeup_capable(dev, true);
|
|
acpi_pci_sleep_wake(pci_dev, false);
|
|
if (adev->wakeup.flags.run_wake)
|
|
device_set_run_wake(dev, true);
|
|
}
|
|
|
|
static void pci_acpi_cleanup(struct device *dev)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(dev);
|
|
|
|
if (!adev)
|
|
return;
|
|
|
|
pci_acpi_remove_pm_notifier(adev);
|
|
if (adev->wakeup.flags.valid) {
|
|
device_set_wakeup_capable(dev, false);
|
|
device_set_run_wake(dev, false);
|
|
}
|
|
}
|
|
|
|
static bool pci_acpi_bus_match(struct device *dev)
|
|
{
|
|
return dev_is_pci(dev);
|
|
}
|
|
|
|
static struct acpi_bus_type acpi_pci_bus = {
|
|
.name = "PCI",
|
|
.match = pci_acpi_bus_match,
|
|
.find_companion = acpi_pci_find_companion,
|
|
.setup = pci_acpi_setup,
|
|
.cleanup = pci_acpi_cleanup,
|
|
};
|
|
|
|
static int __init acpi_pci_init(void)
|
|
{
|
|
int ret;
|
|
|
|
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_MSI) {
|
|
pr_info("ACPI FADT declares the system doesn't support MSI, so disable it\n");
|
|
pci_no_msi();
|
|
}
|
|
|
|
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
|
|
pr_info("ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n");
|
|
pcie_no_aspm();
|
|
}
|
|
|
|
ret = register_acpi_bus_type(&acpi_pci_bus);
|
|
if (ret)
|
|
return 0;
|
|
|
|
pci_set_platform_pm(&acpi_pci_platform_pm);
|
|
acpi_pci_slot_init();
|
|
acpiphp_init();
|
|
|
|
return 0;
|
|
}
|
|
arch_initcall(acpi_pci_init);
|