![Tejun Heo](/assets/img/avatar_default.png)
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
250 lines
5.9 KiB
C
250 lines
5.9 KiB
C
/**
|
|
* drivers/gpio/max7301.c
|
|
*
|
|
* Copyright (C) 2006 Juergen Beisert, Pengutronix
|
|
* Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
|
|
* Copyright (C) 2009 Wolfram Sang, Pengutronix
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* The Maxim MAX7300/1 device is an I2C/SPI driven GPIO expander. There are
|
|
* 28 GPIOs. 8 of them can trigger an interrupt. See datasheet for more
|
|
* details
|
|
* Note:
|
|
* - DIN must be stable at the rising edge of clock.
|
|
* - when writing:
|
|
* - always clock in 16 clocks at once
|
|
* - at DIN: D15 first, D0 last
|
|
* - D0..D7 = databyte, D8..D14 = commandbyte
|
|
* - D15 = low -> write command
|
|
* - when reading
|
|
* - always clock in 16 clocks at once
|
|
* - at DIN: D15 first, D0 last
|
|
* - D0..D7 = dummy, D8..D14 = register address
|
|
* - D15 = high -> read command
|
|
* - raise CS and assert it again
|
|
* - always clock in 16 clocks at once
|
|
* - at DOUT: D15 first, D0 last
|
|
* - D0..D7 contains the data from the first cycle
|
|
*
|
|
* The driver exports a standard gpiochip interface
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/spi/max7301.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
|
|
/*
|
|
* Pin configurations, see MAX7301 datasheet page 6
|
|
*/
|
|
#define PIN_CONFIG_MASK 0x03
|
|
#define PIN_CONFIG_IN_PULLUP 0x03
|
|
#define PIN_CONFIG_IN_WO_PULLUP 0x02
|
|
#define PIN_CONFIG_OUT 0x01
|
|
|
|
#define PIN_NUMBER 28
|
|
|
|
static int max7301_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct max7301 *ts = container_of(chip, struct max7301, chip);
|
|
u8 *config;
|
|
u8 offset_bits;
|
|
int ret;
|
|
|
|
/* First 4 pins are unused in the controller */
|
|
offset += 4;
|
|
offset_bits = (offset & 3) << 1;
|
|
|
|
config = &ts->port_config[offset >> 2];
|
|
|
|
mutex_lock(&ts->lock);
|
|
|
|
/* Standard GPIO API doesn't support pull-ups, has to be extended.
|
|
* Hard-coding no pollup for now. */
|
|
*config = (*config & ~(PIN_CONFIG_MASK << offset_bits))
|
|
| (PIN_CONFIG_IN_WO_PULLUP << offset_bits);
|
|
|
|
ret = ts->write(ts->dev, 0x08 + (offset >> 2), *config);
|
|
|
|
mutex_unlock(&ts->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __max7301_set(struct max7301 *ts, unsigned offset, int value)
|
|
{
|
|
if (value) {
|
|
ts->out_level |= 1 << offset;
|
|
return ts->write(ts->dev, 0x20 + offset, 0x01);
|
|
} else {
|
|
ts->out_level &= ~(1 << offset);
|
|
return ts->write(ts->dev, 0x20 + offset, 0x00);
|
|
}
|
|
}
|
|
|
|
static int max7301_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
struct max7301 *ts = container_of(chip, struct max7301, chip);
|
|
u8 *config;
|
|
u8 offset_bits;
|
|
int ret;
|
|
|
|
/* First 4 pins are unused in the controller */
|
|
offset += 4;
|
|
offset_bits = (offset & 3) << 1;
|
|
|
|
config = &ts->port_config[offset >> 2];
|
|
|
|
mutex_lock(&ts->lock);
|
|
|
|
*config = (*config & ~(PIN_CONFIG_MASK << offset_bits))
|
|
| (PIN_CONFIG_OUT << offset_bits);
|
|
|
|
ret = __max7301_set(ts, offset, value);
|
|
|
|
if (!ret)
|
|
ret = ts->write(ts->dev, 0x08 + (offset >> 2), *config);
|
|
|
|
mutex_unlock(&ts->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max7301_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct max7301 *ts = container_of(chip, struct max7301, chip);
|
|
int config, level = -EINVAL;
|
|
|
|
/* First 4 pins are unused in the controller */
|
|
offset += 4;
|
|
|
|
mutex_lock(&ts->lock);
|
|
|
|
config = (ts->port_config[offset >> 2] >> ((offset & 3) << 1))
|
|
& PIN_CONFIG_MASK;
|
|
|
|
switch (config) {
|
|
case PIN_CONFIG_OUT:
|
|
/* Output: return cached level */
|
|
level = !!(ts->out_level & (1 << offset));
|
|
break;
|
|
case PIN_CONFIG_IN_WO_PULLUP:
|
|
case PIN_CONFIG_IN_PULLUP:
|
|
/* Input: read out */
|
|
level = ts->read(ts->dev, 0x20 + offset) & 0x01;
|
|
}
|
|
mutex_unlock(&ts->lock);
|
|
|
|
return level;
|
|
}
|
|
|
|
static void max7301_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct max7301 *ts = container_of(chip, struct max7301, chip);
|
|
|
|
/* First 4 pins are unused in the controller */
|
|
offset += 4;
|
|
|
|
mutex_lock(&ts->lock);
|
|
|
|
__max7301_set(ts, offset, value);
|
|
|
|
mutex_unlock(&ts->lock);
|
|
}
|
|
|
|
int __devinit __max730x_probe(struct max7301 *ts)
|
|
{
|
|
struct device *dev = ts->dev;
|
|
struct max7301_platform_data *pdata;
|
|
int i, ret;
|
|
|
|
pdata = dev->platform_data;
|
|
if (!pdata || !pdata->base) {
|
|
dev_err(dev, "incorrect or missing platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_init(&ts->lock);
|
|
dev_set_drvdata(dev, ts);
|
|
|
|
/* Power up the chip and disable IRQ output */
|
|
ts->write(dev, 0x04, 0x01);
|
|
|
|
ts->chip.label = dev->driver->name;
|
|
|
|
ts->chip.direction_input = max7301_direction_input;
|
|
ts->chip.get = max7301_get;
|
|
ts->chip.direction_output = max7301_direction_output;
|
|
ts->chip.set = max7301_set;
|
|
|
|
ts->chip.base = pdata->base;
|
|
ts->chip.ngpio = PIN_NUMBER;
|
|
ts->chip.can_sleep = 1;
|
|
ts->chip.dev = dev;
|
|
ts->chip.owner = THIS_MODULE;
|
|
|
|
/*
|
|
* tristate all pins in hardware and cache the
|
|
* register values for later use.
|
|
*/
|
|
for (i = 1; i < 8; i++) {
|
|
int j;
|
|
/* 0xAA means input with internal pullup disabled */
|
|
ts->write(dev, 0x08 + i, 0xAA);
|
|
ts->port_config[i] = 0xAA;
|
|
for (j = 0; j < 4; j++) {
|
|
int offset = (i - 1) * 4 + j;
|
|
ret = max7301_direction_input(&ts->chip, offset);
|
|
if (ret)
|
|
goto exit_destroy;
|
|
}
|
|
}
|
|
|
|
ret = gpiochip_add(&ts->chip);
|
|
if (ret)
|
|
goto exit_destroy;
|
|
|
|
return ret;
|
|
|
|
exit_destroy:
|
|
dev_set_drvdata(dev, NULL);
|
|
mutex_destroy(&ts->lock);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__max730x_probe);
|
|
|
|
int __devexit __max730x_remove(struct device *dev)
|
|
{
|
|
struct max7301 *ts = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
if (ts == NULL)
|
|
return -ENODEV;
|
|
|
|
dev_set_drvdata(dev, NULL);
|
|
|
|
/* Power down the chip and disable IRQ output */
|
|
ts->write(dev, 0x04, 0x00);
|
|
|
|
ret = gpiochip_remove(&ts->chip);
|
|
if (!ret) {
|
|
mutex_destroy(&ts->lock);
|
|
kfree(ts);
|
|
} else
|
|
dev_err(dev, "Failed to remove GPIO controller: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__max730x_remove);
|
|
|
|
MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MAX730x GPIO-Expanders, generic parts");
|