alistair23-linux/drivers/gpu/drm/cirrus/cirrus_mode.c
Gerd Hoffmann 550f17441f drm/cirrus: flip default from 24bpp to 16bpp
The problem with 24bpp is that it is a rather unusual depth these days,
cirrus is pretty much the only relevant device still using that, and it
is a endless source of issues.  Wayland doesn't support it at all.  Bugs
in Xorg keep showing up.

Typically either 32bpp or 16bpp are used.  Using 32bpp would limit the
resolution to 800x600 due to hardware constrains.  So lets go with 16bpp.

Also use the default depth for the framebuffer console and
mode_info->preferred_depth.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180808111311.30311-1-kraxel@redhat.com
2018-08-10 07:57:47 +02:00

553 lines
13 KiB
C

/*
* Copyright 2012 Red Hat
*
* This file is subject to the terms and conditions of the GNU General
* Public License version 2. See the file COPYING in the main
* directory of this archive for more details.
*
* Authors: Matthew Garrett
* Dave Airlie
*
* Portions of this code derived from cirrusfb.c:
* drivers/video/cirrusfb.c - driver for Cirrus Logic chipsets
*
* Copyright 1999-2001 Jeff Garzik <jgarzik@pobox.com>
*/
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_plane_helper.h>
#include <video/cirrus.h>
#include "cirrus_drv.h"
#define CIRRUS_LUT_SIZE 256
#define PALETTE_INDEX 0x8
#define PALETTE_DATA 0x9
/*
* This file contains setup code for the CRTC.
*/
/*
* The DRM core requires DPMS functions, but they make little sense in our
* case and so are just stubs
*/
static void cirrus_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
struct cirrus_device *cdev = dev->dev_private;
u8 sr01, gr0e;
switch (mode) {
case DRM_MODE_DPMS_ON:
sr01 = 0x00;
gr0e = 0x00;
break;
case DRM_MODE_DPMS_STANDBY:
sr01 = 0x20;
gr0e = 0x02;
break;
case DRM_MODE_DPMS_SUSPEND:
sr01 = 0x20;
gr0e = 0x04;
break;
case DRM_MODE_DPMS_OFF:
sr01 = 0x20;
gr0e = 0x06;
break;
default:
return;
}
WREG8(SEQ_INDEX, 0x1);
sr01 |= RREG8(SEQ_DATA) & ~0x20;
WREG_SEQ(0x1, sr01);
WREG8(GFX_INDEX, 0xe);
gr0e |= RREG8(GFX_DATA) & ~0x06;
WREG_GFX(0xe, gr0e);
}
static void cirrus_set_start_address(struct drm_crtc *crtc, unsigned offset)
{
struct cirrus_device *cdev = crtc->dev->dev_private;
u32 addr;
u8 tmp;
addr = offset >> 2;
WREG_CRT(0x0c, (u8)((addr >> 8) & 0xff));
WREG_CRT(0x0d, (u8)(addr & 0xff));
WREG8(CRT_INDEX, 0x1b);
tmp = RREG8(CRT_DATA);
tmp &= 0xf2;
tmp |= (addr >> 16) & 0x01;
tmp |= (addr >> 15) & 0x0c;
WREG_CRT(0x1b, tmp);
WREG8(CRT_INDEX, 0x1d);
tmp = RREG8(CRT_DATA);
tmp &= 0x7f;
tmp |= (addr >> 12) & 0x80;
WREG_CRT(0x1d, tmp);
}
/* cirrus is different - we will force move buffers out of VRAM */
static int cirrus_crtc_do_set_base(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int x, int y, int atomic)
{
struct cirrus_device *cdev = crtc->dev->dev_private;
struct cirrus_bo *bo;
int ret;
u64 gpu_addr;
/* push the previous fb to system ram */
if (!atomic && fb) {
bo = gem_to_cirrus_bo(fb->obj[0]);
ret = cirrus_bo_reserve(bo, false);
if (ret)
return ret;
cirrus_bo_push_sysram(bo);
cirrus_bo_unreserve(bo);
}
bo = gem_to_cirrus_bo(crtc->primary->fb->obj[0]);
ret = cirrus_bo_reserve(bo, false);
if (ret)
return ret;
ret = cirrus_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr);
if (ret) {
cirrus_bo_unreserve(bo);
return ret;
}
if (cdev->mode_info.gfbdev->gfb == crtc->primary->fb) {
/* if pushing console in kmap it */
ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &bo->kmap);
if (ret)
DRM_ERROR("failed to kmap fbcon\n");
}
cirrus_bo_unreserve(bo);
cirrus_set_start_address(crtc, (u32)gpu_addr);
return 0;
}
static int cirrus_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
return cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0);
}
/*
* The meat of this driver. The core passes us a mode and we have to program
* it. The modesetting here is the bare minimum required to satisfy the qemu
* emulation of this hardware, and running this against a real device is
* likely to result in an inadequately programmed mode. We've already had
* the opportunity to modify the mode, so whatever we receive here should
* be something that can be correctly programmed and displayed
*/
static int cirrus_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y, struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct cirrus_device *cdev = dev->dev_private;
const struct drm_framebuffer *fb = crtc->primary->fb;
int hsyncstart, hsyncend, htotal, hdispend;
int vtotal, vdispend;
int tmp;
int sr07 = 0, hdr = 0;
htotal = mode->htotal / 8;
hsyncend = mode->hsync_end / 8;
hsyncstart = mode->hsync_start / 8;
hdispend = mode->hdisplay / 8;
vtotal = mode->vtotal;
vdispend = mode->vdisplay;
vdispend -= 1;
vtotal -= 2;
htotal -= 5;
hdispend -= 1;
hsyncstart += 1;
hsyncend += 1;
WREG_CRT(VGA_CRTC_V_SYNC_END, 0x20);
WREG_CRT(VGA_CRTC_H_TOTAL, htotal);
WREG_CRT(VGA_CRTC_H_DISP, hdispend);
WREG_CRT(VGA_CRTC_H_SYNC_START, hsyncstart);
WREG_CRT(VGA_CRTC_H_SYNC_END, hsyncend);
WREG_CRT(VGA_CRTC_V_TOTAL, vtotal & 0xff);
WREG_CRT(VGA_CRTC_V_DISP_END, vdispend & 0xff);
tmp = 0x40;
if ((vdispend + 1) & 512)
tmp |= 0x20;
WREG_CRT(VGA_CRTC_MAX_SCAN, tmp);
/*
* Overflow bits for values that don't fit in the standard registers
*/
tmp = 16;
if (vtotal & 256)
tmp |= 1;
if (vdispend & 256)
tmp |= 2;
if ((vdispend + 1) & 256)
tmp |= 8;
if (vtotal & 512)
tmp |= 32;
if (vdispend & 512)
tmp |= 64;
WREG_CRT(VGA_CRTC_OVERFLOW, tmp);
tmp = 0;
/* More overflow bits */
if ((htotal + 5) & 64)
tmp |= 16;
if ((htotal + 5) & 128)
tmp |= 32;
if (vtotal & 256)
tmp |= 64;
if (vtotal & 512)
tmp |= 128;
WREG_CRT(CL_CRT1A, tmp);
/* Disable Hercules/CGA compatibility */
WREG_CRT(VGA_CRTC_MODE, 0x03);
WREG8(SEQ_INDEX, 0x7);
sr07 = RREG8(SEQ_DATA);
sr07 &= 0xe0;
hdr = 0;
switch (fb->format->cpp[0] * 8) {
case 8:
sr07 |= 0x11;
break;
case 16:
sr07 |= 0x17;
hdr = 0xc1;
break;
case 24:
sr07 |= 0x15;
hdr = 0xc5;
break;
case 32:
sr07 |= 0x19;
hdr = 0xc5;
break;
default:
return -1;
}
WREG_SEQ(0x7, sr07);
/* Program the pitch */
tmp = fb->pitches[0] / 8;
WREG_CRT(VGA_CRTC_OFFSET, tmp);
/* Enable extended blanking and pitch bits, and enable full memory */
tmp = 0x22;
tmp |= (fb->pitches[0] >> 7) & 0x10;
tmp |= (fb->pitches[0] >> 6) & 0x40;
WREG_CRT(0x1b, tmp);
/* Enable high-colour modes */
WREG_GFX(VGA_GFX_MODE, 0x40);
/* And set graphics mode */
WREG_GFX(VGA_GFX_MISC, 0x01);
WREG_HDR(hdr);
cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0);
/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
outb(0x20, 0x3c0);
return 0;
}
/*
* This is called before a mode is programmed. A typical use might be to
* enable DPMS during the programming to avoid seeing intermediate stages,
* but that's not relevant to us
*/
static void cirrus_crtc_prepare(struct drm_crtc *crtc)
{
}
static void cirrus_crtc_load_lut(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct cirrus_device *cdev = dev->dev_private;
u16 *r, *g, *b;
int i;
if (!crtc->enabled)
return;
r = crtc->gamma_store;
g = r + crtc->gamma_size;
b = g + crtc->gamma_size;
for (i = 0; i < CIRRUS_LUT_SIZE; i++) {
/* VGA registers */
WREG8(PALETTE_INDEX, i);
WREG8(PALETTE_DATA, *r++ >> 8);
WREG8(PALETTE_DATA, *g++ >> 8);
WREG8(PALETTE_DATA, *b++ >> 8);
}
}
/*
* This is called after a mode is programmed. It should reverse anything done
* by the prepare function
*/
static void cirrus_crtc_commit(struct drm_crtc *crtc)
{
cirrus_crtc_load_lut(crtc);
}
/*
* The core can pass us a set of gamma values to program. We actually only
* use this for 8-bit mode so can't perform smooth fades on deeper modes,
* but it's a requirement that we provide the function
*/
static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, uint32_t size,
struct drm_modeset_acquire_ctx *ctx)
{
cirrus_crtc_load_lut(crtc);
return 0;
}
/* Simple cleanup function */
static void cirrus_crtc_destroy(struct drm_crtc *crtc)
{
struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
drm_crtc_cleanup(crtc);
kfree(cirrus_crtc);
}
/* These provide the minimum set of functions required to handle a CRTC */
static const struct drm_crtc_funcs cirrus_crtc_funcs = {
.gamma_set = cirrus_crtc_gamma_set,
.set_config = drm_crtc_helper_set_config,
.destroy = cirrus_crtc_destroy,
};
static const struct drm_crtc_helper_funcs cirrus_helper_funcs = {
.dpms = cirrus_crtc_dpms,
.mode_set = cirrus_crtc_mode_set,
.mode_set_base = cirrus_crtc_mode_set_base,
.prepare = cirrus_crtc_prepare,
.commit = cirrus_crtc_commit,
};
/* CRTC setup */
static void cirrus_crtc_init(struct drm_device *dev)
{
struct cirrus_device *cdev = dev->dev_private;
struct cirrus_crtc *cirrus_crtc;
cirrus_crtc = kzalloc(sizeof(struct cirrus_crtc) +
(CIRRUSFB_CONN_LIMIT * sizeof(struct drm_connector *)),
GFP_KERNEL);
if (cirrus_crtc == NULL)
return;
drm_crtc_init(dev, &cirrus_crtc->base, &cirrus_crtc_funcs);
drm_mode_crtc_set_gamma_size(&cirrus_crtc->base, CIRRUS_LUT_SIZE);
cdev->mode_info.crtc = cirrus_crtc;
drm_crtc_helper_add(&cirrus_crtc->base, &cirrus_helper_funcs);
}
static void cirrus_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
}
static void cirrus_encoder_dpms(struct drm_encoder *encoder, int state)
{
return;
}
static void cirrus_encoder_prepare(struct drm_encoder *encoder)
{
}
static void cirrus_encoder_commit(struct drm_encoder *encoder)
{
}
static void cirrus_encoder_destroy(struct drm_encoder *encoder)
{
struct cirrus_encoder *cirrus_encoder = to_cirrus_encoder(encoder);
drm_encoder_cleanup(encoder);
kfree(cirrus_encoder);
}
static const struct drm_encoder_helper_funcs cirrus_encoder_helper_funcs = {
.dpms = cirrus_encoder_dpms,
.mode_set = cirrus_encoder_mode_set,
.prepare = cirrus_encoder_prepare,
.commit = cirrus_encoder_commit,
};
static const struct drm_encoder_funcs cirrus_encoder_encoder_funcs = {
.destroy = cirrus_encoder_destroy,
};
static struct drm_encoder *cirrus_encoder_init(struct drm_device *dev)
{
struct drm_encoder *encoder;
struct cirrus_encoder *cirrus_encoder;
cirrus_encoder = kzalloc(sizeof(struct cirrus_encoder), GFP_KERNEL);
if (!cirrus_encoder)
return NULL;
encoder = &cirrus_encoder->base;
encoder->possible_crtcs = 0x1;
drm_encoder_init(dev, encoder, &cirrus_encoder_encoder_funcs,
DRM_MODE_ENCODER_DAC, NULL);
drm_encoder_helper_add(encoder, &cirrus_encoder_helper_funcs);
return encoder;
}
static int cirrus_vga_get_modes(struct drm_connector *connector)
{
int count;
/* Just add a static list of modes */
if (cirrus_bpp <= 24) {
count = drm_add_modes_noedid(connector, 1280, 1024);
drm_set_preferred_mode(connector, 1024, 768);
} else {
count = drm_add_modes_noedid(connector, 800, 600);
drm_set_preferred_mode(connector, 800, 600);
}
return count;
}
static struct drm_encoder *cirrus_connector_best_encoder(struct drm_connector
*connector)
{
int enc_id = connector->encoder_ids[0];
/* pick the encoder ids */
if (enc_id)
return drm_encoder_find(connector->dev, NULL, enc_id);
return NULL;
}
static void cirrus_connector_destroy(struct drm_connector *connector)
{
drm_connector_cleanup(connector);
kfree(connector);
}
static const struct drm_connector_helper_funcs cirrus_vga_connector_helper_funcs = {
.get_modes = cirrus_vga_get_modes,
.best_encoder = cirrus_connector_best_encoder,
};
static const struct drm_connector_funcs cirrus_vga_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = cirrus_connector_destroy,
};
static struct drm_connector *cirrus_vga_init(struct drm_device *dev)
{
struct drm_connector *connector;
struct cirrus_connector *cirrus_connector;
cirrus_connector = kzalloc(sizeof(struct cirrus_connector), GFP_KERNEL);
if (!cirrus_connector)
return NULL;
connector = &cirrus_connector->base;
drm_connector_init(dev, connector,
&cirrus_vga_connector_funcs, DRM_MODE_CONNECTOR_VGA);
drm_connector_helper_add(connector, &cirrus_vga_connector_helper_funcs);
drm_connector_register(connector);
return connector;
}
int cirrus_modeset_init(struct cirrus_device *cdev)
{
struct drm_encoder *encoder;
struct drm_connector *connector;
int ret;
drm_mode_config_init(cdev->dev);
cdev->mode_info.mode_config_initialized = true;
cdev->dev->mode_config.max_width = CIRRUS_MAX_FB_WIDTH;
cdev->dev->mode_config.max_height = CIRRUS_MAX_FB_HEIGHT;
cdev->dev->mode_config.fb_base = cdev->mc.vram_base;
cdev->dev->mode_config.preferred_depth = cirrus_bpp;
/* don't prefer a shadow on virt GPU */
cdev->dev->mode_config.prefer_shadow = 0;
cirrus_crtc_init(cdev->dev);
encoder = cirrus_encoder_init(cdev->dev);
if (!encoder) {
DRM_ERROR("cirrus_encoder_init failed\n");
return -1;
}
connector = cirrus_vga_init(cdev->dev);
if (!connector) {
DRM_ERROR("cirrus_vga_init failed\n");
return -1;
}
drm_connector_attach_encoder(connector, encoder);
ret = cirrus_fbdev_init(cdev);
if (ret) {
DRM_ERROR("cirrus_fbdev_init failed\n");
return ret;
}
return 0;
}
void cirrus_modeset_fini(struct cirrus_device *cdev)
{
cirrus_fbdev_fini(cdev);
if (cdev->mode_info.mode_config_initialized) {
drm_mode_config_cleanup(cdev->dev);
cdev->mode_info.mode_config_initialized = false;
}
}