![jilai wang](/assets/img/avatar_default.png)
HDCP driver needs to check if secure environment supports HDCP. If it's supported, then it requires to program some registers through SCM. Add qcom_scm_hdcp_available and qcom_scm_hdcp_req to support these requirements. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
504 lines
13 KiB
C
504 lines
13 KiB
C
/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
|
|
* Copyright (C) 2015 Linaro Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/qcom_scm.h>
|
|
|
|
#include <asm/outercache.h>
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include "qcom_scm.h"
|
|
|
|
#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
|
|
#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
|
|
#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
|
|
#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
|
|
|
|
#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
|
|
#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
|
|
#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
|
|
#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
|
|
|
|
struct qcom_scm_entry {
|
|
int flag;
|
|
void *entry;
|
|
};
|
|
|
|
static struct qcom_scm_entry qcom_scm_wb[] = {
|
|
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
|
|
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
|
|
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
|
|
{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
|
|
};
|
|
|
|
static DEFINE_MUTEX(qcom_scm_lock);
|
|
|
|
/**
|
|
* struct qcom_scm_command - one SCM command buffer
|
|
* @len: total available memory for command and response
|
|
* @buf_offset: start of command buffer
|
|
* @resp_hdr_offset: start of response buffer
|
|
* @id: command to be executed
|
|
* @buf: buffer returned from qcom_scm_get_command_buffer()
|
|
*
|
|
* An SCM command is laid out in memory as follows:
|
|
*
|
|
* ------------------- <--- struct qcom_scm_command
|
|
* | command header |
|
|
* ------------------- <--- qcom_scm_get_command_buffer()
|
|
* | command buffer |
|
|
* ------------------- <--- struct qcom_scm_response and
|
|
* | response header | qcom_scm_command_to_response()
|
|
* ------------------- <--- qcom_scm_get_response_buffer()
|
|
* | response buffer |
|
|
* -------------------
|
|
*
|
|
* There can be arbitrary padding between the headers and buffers so
|
|
* you should always use the appropriate qcom_scm_get_*_buffer() routines
|
|
* to access the buffers in a safe manner.
|
|
*/
|
|
struct qcom_scm_command {
|
|
__le32 len;
|
|
__le32 buf_offset;
|
|
__le32 resp_hdr_offset;
|
|
__le32 id;
|
|
__le32 buf[0];
|
|
};
|
|
|
|
/**
|
|
* struct qcom_scm_response - one SCM response buffer
|
|
* @len: total available memory for response
|
|
* @buf_offset: start of response data relative to start of qcom_scm_response
|
|
* @is_complete: indicates if the command has finished processing
|
|
*/
|
|
struct qcom_scm_response {
|
|
__le32 len;
|
|
__le32 buf_offset;
|
|
__le32 is_complete;
|
|
};
|
|
|
|
/**
|
|
* alloc_qcom_scm_command() - Allocate an SCM command
|
|
* @cmd_size: size of the command buffer
|
|
* @resp_size: size of the response buffer
|
|
*
|
|
* Allocate an SCM command, including enough room for the command
|
|
* and response headers as well as the command and response buffers.
|
|
*
|
|
* Returns a valid &qcom_scm_command on success or %NULL if the allocation fails.
|
|
*/
|
|
static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size)
|
|
{
|
|
struct qcom_scm_command *cmd;
|
|
size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size +
|
|
resp_size;
|
|
u32 offset;
|
|
|
|
cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
|
|
if (cmd) {
|
|
cmd->len = cpu_to_le32(len);
|
|
offset = offsetof(struct qcom_scm_command, buf);
|
|
cmd->buf_offset = cpu_to_le32(offset);
|
|
cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size);
|
|
}
|
|
return cmd;
|
|
}
|
|
|
|
/**
|
|
* free_qcom_scm_command() - Free an SCM command
|
|
* @cmd: command to free
|
|
*
|
|
* Free an SCM command.
|
|
*/
|
|
static inline void free_qcom_scm_command(struct qcom_scm_command *cmd)
|
|
{
|
|
kfree(cmd);
|
|
}
|
|
|
|
/**
|
|
* qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
|
|
* @cmd: command
|
|
*
|
|
* Returns a pointer to a response for a command.
|
|
*/
|
|
static inline struct qcom_scm_response *qcom_scm_command_to_response(
|
|
const struct qcom_scm_command *cmd)
|
|
{
|
|
return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
|
|
}
|
|
|
|
/**
|
|
* qcom_scm_get_command_buffer() - Get a pointer to a command buffer
|
|
* @cmd: command
|
|
*
|
|
* Returns a pointer to the command buffer of a command.
|
|
*/
|
|
static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
|
|
{
|
|
return (void *)cmd->buf;
|
|
}
|
|
|
|
/**
|
|
* qcom_scm_get_response_buffer() - Get a pointer to a response buffer
|
|
* @rsp: response
|
|
*
|
|
* Returns a pointer to a response buffer of a response.
|
|
*/
|
|
static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
|
|
{
|
|
return (void *)rsp + le32_to_cpu(rsp->buf_offset);
|
|
}
|
|
|
|
static int qcom_scm_remap_error(int err)
|
|
{
|
|
pr_err("qcom_scm_call failed with error code %d\n", err);
|
|
switch (err) {
|
|
case QCOM_SCM_ERROR:
|
|
return -EIO;
|
|
case QCOM_SCM_EINVAL_ADDR:
|
|
case QCOM_SCM_EINVAL_ARG:
|
|
return -EINVAL;
|
|
case QCOM_SCM_EOPNOTSUPP:
|
|
return -EOPNOTSUPP;
|
|
case QCOM_SCM_ENOMEM:
|
|
return -ENOMEM;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static u32 smc(u32 cmd_addr)
|
|
{
|
|
int context_id;
|
|
register u32 r0 asm("r0") = 1;
|
|
register u32 r1 asm("r1") = (u32)&context_id;
|
|
register u32 r2 asm("r2") = cmd_addr;
|
|
do {
|
|
asm volatile(
|
|
__asmeq("%0", "r0")
|
|
__asmeq("%1", "r0")
|
|
__asmeq("%2", "r1")
|
|
__asmeq("%3", "r2")
|
|
#ifdef REQUIRES_SEC
|
|
".arch_extension sec\n"
|
|
#endif
|
|
"smc #0 @ switch to secure world\n"
|
|
: "=r" (r0)
|
|
: "r" (r0), "r" (r1), "r" (r2)
|
|
: "r3");
|
|
} while (r0 == QCOM_SCM_INTERRUPTED);
|
|
|
|
return r0;
|
|
}
|
|
|
|
static int __qcom_scm_call(const struct qcom_scm_command *cmd)
|
|
{
|
|
int ret;
|
|
u32 cmd_addr = virt_to_phys(cmd);
|
|
|
|
/*
|
|
* Flush the command buffer so that the secure world sees
|
|
* the correct data.
|
|
*/
|
|
__cpuc_flush_dcache_area((void *)cmd, cmd->len);
|
|
outer_flush_range(cmd_addr, cmd_addr + cmd->len);
|
|
|
|
ret = smc(cmd_addr);
|
|
if (ret < 0)
|
|
ret = qcom_scm_remap_error(ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void qcom_scm_inv_range(unsigned long start, unsigned long end)
|
|
{
|
|
u32 cacheline_size, ctr;
|
|
|
|
asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
|
|
cacheline_size = 4 << ((ctr >> 16) & 0xf);
|
|
|
|
start = round_down(start, cacheline_size);
|
|
end = round_up(end, cacheline_size);
|
|
outer_inv_range(start, end);
|
|
while (start < end) {
|
|
asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
|
|
: "memory");
|
|
start += cacheline_size;
|
|
}
|
|
dsb();
|
|
isb();
|
|
}
|
|
|
|
/**
|
|
* qcom_scm_call() - Send an SCM command
|
|
* @svc_id: service identifier
|
|
* @cmd_id: command identifier
|
|
* @cmd_buf: command buffer
|
|
* @cmd_len: length of the command buffer
|
|
* @resp_buf: response buffer
|
|
* @resp_len: length of the response buffer
|
|
*
|
|
* Sends a command to the SCM and waits for the command to finish processing.
|
|
*
|
|
* A note on cache maintenance:
|
|
* Note that any buffers that are expected to be accessed by the secure world
|
|
* must be flushed before invoking qcom_scm_call and invalidated in the cache
|
|
* immediately after qcom_scm_call returns. Cache maintenance on the command
|
|
* and response buffers is taken care of by qcom_scm_call; however, callers are
|
|
* responsible for any other cached buffers passed over to the secure world.
|
|
*/
|
|
static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf,
|
|
size_t cmd_len, void *resp_buf, size_t resp_len)
|
|
{
|
|
int ret;
|
|
struct qcom_scm_command *cmd;
|
|
struct qcom_scm_response *rsp;
|
|
unsigned long start, end;
|
|
|
|
cmd = alloc_qcom_scm_command(cmd_len, resp_len);
|
|
if (!cmd)
|
|
return -ENOMEM;
|
|
|
|
cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
|
|
if (cmd_buf)
|
|
memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
|
|
|
|
mutex_lock(&qcom_scm_lock);
|
|
ret = __qcom_scm_call(cmd);
|
|
mutex_unlock(&qcom_scm_lock);
|
|
if (ret)
|
|
goto out;
|
|
|
|
rsp = qcom_scm_command_to_response(cmd);
|
|
start = (unsigned long)rsp;
|
|
|
|
do {
|
|
qcom_scm_inv_range(start, start + sizeof(*rsp));
|
|
} while (!rsp->is_complete);
|
|
|
|
end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len;
|
|
qcom_scm_inv_range(start, end);
|
|
|
|
if (resp_buf)
|
|
memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len);
|
|
out:
|
|
free_qcom_scm_command(cmd);
|
|
return ret;
|
|
}
|
|
|
|
#define SCM_CLASS_REGISTER (0x2 << 8)
|
|
#define SCM_MASK_IRQS BIT(5)
|
|
#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
|
|
SCM_CLASS_REGISTER | \
|
|
SCM_MASK_IRQS | \
|
|
(n & 0xf))
|
|
|
|
/**
|
|
* qcom_scm_call_atomic1() - Send an atomic SCM command with one argument
|
|
* @svc_id: service identifier
|
|
* @cmd_id: command identifier
|
|
* @arg1: first argument
|
|
*
|
|
* This shall only be used with commands that are guaranteed to be
|
|
* uninterruptable, atomic and SMP safe.
|
|
*/
|
|
static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
|
|
{
|
|
int context_id;
|
|
|
|
register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
|
|
register u32 r1 asm("r1") = (u32)&context_id;
|
|
register u32 r2 asm("r2") = arg1;
|
|
|
|
asm volatile(
|
|
__asmeq("%0", "r0")
|
|
__asmeq("%1", "r0")
|
|
__asmeq("%2", "r1")
|
|
__asmeq("%3", "r2")
|
|
#ifdef REQUIRES_SEC
|
|
".arch_extension sec\n"
|
|
#endif
|
|
"smc #0 @ switch to secure world\n"
|
|
: "=r" (r0)
|
|
: "r" (r0), "r" (r1), "r" (r2)
|
|
: "r3");
|
|
return r0;
|
|
}
|
|
|
|
u32 qcom_scm_get_version(void)
|
|
{
|
|
int context_id;
|
|
static u32 version = -1;
|
|
register u32 r0 asm("r0");
|
|
register u32 r1 asm("r1");
|
|
|
|
if (version != -1)
|
|
return version;
|
|
|
|
mutex_lock(&qcom_scm_lock);
|
|
|
|
r0 = 0x1 << 8;
|
|
r1 = (u32)&context_id;
|
|
do {
|
|
asm volatile(
|
|
__asmeq("%0", "r0")
|
|
__asmeq("%1", "r1")
|
|
__asmeq("%2", "r0")
|
|
__asmeq("%3", "r1")
|
|
#ifdef REQUIRES_SEC
|
|
".arch_extension sec\n"
|
|
#endif
|
|
"smc #0 @ switch to secure world\n"
|
|
: "=r" (r0), "=r" (r1)
|
|
: "r" (r0), "r" (r1)
|
|
: "r2", "r3");
|
|
} while (r0 == QCOM_SCM_INTERRUPTED);
|
|
|
|
version = r1;
|
|
mutex_unlock(&qcom_scm_lock);
|
|
|
|
return version;
|
|
}
|
|
EXPORT_SYMBOL(qcom_scm_get_version);
|
|
|
|
/*
|
|
* Set the cold/warm boot address for one of the CPU cores.
|
|
*/
|
|
static int qcom_scm_set_boot_addr(u32 addr, int flags)
|
|
{
|
|
struct {
|
|
__le32 flags;
|
|
__le32 addr;
|
|
} cmd;
|
|
|
|
cmd.addr = cpu_to_le32(addr);
|
|
cmd.flags = cpu_to_le32(flags);
|
|
return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR,
|
|
&cmd, sizeof(cmd), NULL, 0);
|
|
}
|
|
|
|
/**
|
|
* qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
|
|
* @entry: Entry point function for the cpus
|
|
* @cpus: The cpumask of cpus that will use the entry point
|
|
*
|
|
* Set the cold boot address of the cpus. Any cpu outside the supported
|
|
* range would be removed from the cpu present mask.
|
|
*/
|
|
int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
|
|
{
|
|
int flags = 0;
|
|
int cpu;
|
|
int scm_cb_flags[] = {
|
|
QCOM_SCM_FLAG_COLDBOOT_CPU0,
|
|
QCOM_SCM_FLAG_COLDBOOT_CPU1,
|
|
QCOM_SCM_FLAG_COLDBOOT_CPU2,
|
|
QCOM_SCM_FLAG_COLDBOOT_CPU3,
|
|
};
|
|
|
|
if (!cpus || (cpus && cpumask_empty(cpus)))
|
|
return -EINVAL;
|
|
|
|
for_each_cpu(cpu, cpus) {
|
|
if (cpu < ARRAY_SIZE(scm_cb_flags))
|
|
flags |= scm_cb_flags[cpu];
|
|
else
|
|
set_cpu_present(cpu, false);
|
|
}
|
|
|
|
return qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
|
|
}
|
|
|
|
/**
|
|
* qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
|
|
* @entry: Entry point function for the cpus
|
|
* @cpus: The cpumask of cpus that will use the entry point
|
|
*
|
|
* Set the Linux entry point for the SCM to transfer control to when coming
|
|
* out of a power down. CPU power down may be executed on cpuidle or hotplug.
|
|
*/
|
|
int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
|
|
{
|
|
int ret;
|
|
int flags = 0;
|
|
int cpu;
|
|
|
|
/*
|
|
* Reassign only if we are switching from hotplug entry point
|
|
* to cpuidle entry point or vice versa.
|
|
*/
|
|
for_each_cpu(cpu, cpus) {
|
|
if (entry == qcom_scm_wb[cpu].entry)
|
|
continue;
|
|
flags |= qcom_scm_wb[cpu].flag;
|
|
}
|
|
|
|
/* No change in entry function */
|
|
if (!flags)
|
|
return 0;
|
|
|
|
ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags);
|
|
if (!ret) {
|
|
for_each_cpu(cpu, cpus)
|
|
qcom_scm_wb[cpu].entry = entry;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* qcom_scm_cpu_power_down() - Power down the cpu
|
|
* @flags - Flags to flush cache
|
|
*
|
|
* This is an end point to power down cpu. If there was a pending interrupt,
|
|
* the control would return from this function, otherwise, the cpu jumps to the
|
|
* warm boot entry point set for this cpu upon reset.
|
|
*/
|
|
void __qcom_scm_cpu_power_down(u32 flags)
|
|
{
|
|
qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
|
|
flags & QCOM_SCM_FLUSH_FLAG_MASK);
|
|
}
|
|
|
|
int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
|
|
{
|
|
int ret;
|
|
u32 svc_cmd = (svc_id << 10) | cmd_id;
|
|
u32 ret_val = 0;
|
|
|
|
ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
|
|
sizeof(svc_cmd), &ret_val, sizeof(ret_val));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
|
|
{
|
|
if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
|
|
return -ERANGE;
|
|
|
|
return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
|
|
req, req_cnt * sizeof(*req), resp, sizeof(*resp));
|
|
}
|