![Andy Shevchenko](/assets/img/avatar_default.png)
In order to satisfy GPIO ACPI library requirements convert users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
1082 lines
26 KiB
C
1082 lines
26 KiB
C
/*
|
|
* Copyright (c) 2014 Intel Corporation
|
|
*
|
|
* Driver for Semtech's SX9500 capacitive proximity/button solution.
|
|
* Datasheet available at
|
|
* <http://www.semtech.com/images/datasheet/sx9500.pdf>.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
|
|
#define SX9500_DRIVER_NAME "sx9500"
|
|
#define SX9500_IRQ_NAME "sx9500_event"
|
|
|
|
/* Register definitions. */
|
|
#define SX9500_REG_IRQ_SRC 0x00
|
|
#define SX9500_REG_STAT 0x01
|
|
#define SX9500_REG_IRQ_MSK 0x03
|
|
|
|
#define SX9500_REG_PROX_CTRL0 0x06
|
|
#define SX9500_REG_PROX_CTRL1 0x07
|
|
#define SX9500_REG_PROX_CTRL2 0x08
|
|
#define SX9500_REG_PROX_CTRL3 0x09
|
|
#define SX9500_REG_PROX_CTRL4 0x0a
|
|
#define SX9500_REG_PROX_CTRL5 0x0b
|
|
#define SX9500_REG_PROX_CTRL6 0x0c
|
|
#define SX9500_REG_PROX_CTRL7 0x0d
|
|
#define SX9500_REG_PROX_CTRL8 0x0e
|
|
|
|
#define SX9500_REG_SENSOR_SEL 0x20
|
|
#define SX9500_REG_USE_MSB 0x21
|
|
#define SX9500_REG_USE_LSB 0x22
|
|
#define SX9500_REG_AVG_MSB 0x23
|
|
#define SX9500_REG_AVG_LSB 0x24
|
|
#define SX9500_REG_DIFF_MSB 0x25
|
|
#define SX9500_REG_DIFF_LSB 0x26
|
|
#define SX9500_REG_OFFSET_MSB 0x27
|
|
#define SX9500_REG_OFFSET_LSB 0x28
|
|
|
|
#define SX9500_REG_RESET 0x7f
|
|
|
|
/* Write this to REG_RESET to do a soft reset. */
|
|
#define SX9500_SOFT_RESET 0xde
|
|
|
|
#define SX9500_SCAN_PERIOD_MASK GENMASK(6, 4)
|
|
#define SX9500_SCAN_PERIOD_SHIFT 4
|
|
|
|
/*
|
|
* These serve for identifying IRQ source in the IRQ_SRC register, and
|
|
* also for masking the IRQs in the IRQ_MSK register.
|
|
*/
|
|
#define SX9500_CLOSE_IRQ BIT(6)
|
|
#define SX9500_FAR_IRQ BIT(5)
|
|
#define SX9500_CONVDONE_IRQ BIT(3)
|
|
|
|
#define SX9500_PROXSTAT_SHIFT 4
|
|
#define SX9500_COMPSTAT_MASK GENMASK(3, 0)
|
|
|
|
#define SX9500_NUM_CHANNELS 4
|
|
#define SX9500_CHAN_MASK GENMASK(SX9500_NUM_CHANNELS - 1, 0)
|
|
|
|
struct sx9500_data {
|
|
struct mutex mutex;
|
|
struct i2c_client *client;
|
|
struct iio_trigger *trig;
|
|
struct regmap *regmap;
|
|
struct gpio_desc *gpiod_rst;
|
|
/*
|
|
* Last reading of the proximity status for each channel. We
|
|
* only send an event to user space when this changes.
|
|
*/
|
|
bool prox_stat[SX9500_NUM_CHANNELS];
|
|
bool event_enabled[SX9500_NUM_CHANNELS];
|
|
bool trigger_enabled;
|
|
u16 *buffer;
|
|
/* Remember enabled channels and sample rate during suspend. */
|
|
unsigned int suspend_ctrl0;
|
|
struct completion completion;
|
|
int data_rdy_users, close_far_users;
|
|
int channel_users[SX9500_NUM_CHANNELS];
|
|
};
|
|
|
|
static const struct iio_event_spec sx9500_events[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_EITHER,
|
|
.mask_separate = BIT(IIO_EV_INFO_ENABLE),
|
|
},
|
|
};
|
|
|
|
#define SX9500_CHANNEL(idx) \
|
|
{ \
|
|
.type = IIO_PROXIMITY, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.indexed = 1, \
|
|
.channel = idx, \
|
|
.event_spec = sx9500_events, \
|
|
.num_event_specs = ARRAY_SIZE(sx9500_events), \
|
|
.scan_index = idx, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.shift = 0, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec sx9500_channels[] = {
|
|
SX9500_CHANNEL(0),
|
|
SX9500_CHANNEL(1),
|
|
SX9500_CHANNEL(2),
|
|
SX9500_CHANNEL(3),
|
|
IIO_CHAN_SOFT_TIMESTAMP(4),
|
|
};
|
|
|
|
static const struct {
|
|
int val;
|
|
int val2;
|
|
} sx9500_samp_freq_table[] = {
|
|
{33, 333333},
|
|
{16, 666666},
|
|
{11, 111111},
|
|
{8, 333333},
|
|
{6, 666666},
|
|
{5, 0},
|
|
{3, 333333},
|
|
{2, 500000},
|
|
};
|
|
|
|
static const unsigned int sx9500_scan_period_table[] = {
|
|
30, 60, 90, 120, 150, 200, 300, 400,
|
|
};
|
|
|
|
static const struct regmap_range sx9500_writable_reg_ranges[] = {
|
|
regmap_reg_range(SX9500_REG_IRQ_MSK, SX9500_REG_IRQ_MSK),
|
|
regmap_reg_range(SX9500_REG_PROX_CTRL0, SX9500_REG_PROX_CTRL8),
|
|
regmap_reg_range(SX9500_REG_SENSOR_SEL, SX9500_REG_SENSOR_SEL),
|
|
regmap_reg_range(SX9500_REG_OFFSET_MSB, SX9500_REG_OFFSET_LSB),
|
|
regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET),
|
|
};
|
|
|
|
static const struct regmap_access_table sx9500_writeable_regs = {
|
|
.yes_ranges = sx9500_writable_reg_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(sx9500_writable_reg_ranges),
|
|
};
|
|
|
|
/*
|
|
* All allocated registers are readable, so we just list unallocated
|
|
* ones.
|
|
*/
|
|
static const struct regmap_range sx9500_non_readable_reg_ranges[] = {
|
|
regmap_reg_range(SX9500_REG_STAT + 1, SX9500_REG_STAT + 1),
|
|
regmap_reg_range(SX9500_REG_IRQ_MSK + 1, SX9500_REG_PROX_CTRL0 - 1),
|
|
regmap_reg_range(SX9500_REG_PROX_CTRL8 + 1, SX9500_REG_SENSOR_SEL - 1),
|
|
regmap_reg_range(SX9500_REG_OFFSET_LSB + 1, SX9500_REG_RESET - 1),
|
|
};
|
|
|
|
static const struct regmap_access_table sx9500_readable_regs = {
|
|
.no_ranges = sx9500_non_readable_reg_ranges,
|
|
.n_no_ranges = ARRAY_SIZE(sx9500_non_readable_reg_ranges),
|
|
};
|
|
|
|
static const struct regmap_range sx9500_volatile_reg_ranges[] = {
|
|
regmap_reg_range(SX9500_REG_IRQ_SRC, SX9500_REG_STAT),
|
|
regmap_reg_range(SX9500_REG_USE_MSB, SX9500_REG_OFFSET_LSB),
|
|
regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET),
|
|
};
|
|
|
|
static const struct regmap_access_table sx9500_volatile_regs = {
|
|
.yes_ranges = sx9500_volatile_reg_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(sx9500_volatile_reg_ranges),
|
|
};
|
|
|
|
static const struct regmap_config sx9500_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = SX9500_REG_RESET,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
.wr_table = &sx9500_writeable_regs,
|
|
.rd_table = &sx9500_readable_regs,
|
|
.volatile_table = &sx9500_volatile_regs,
|
|
};
|
|
|
|
static int sx9500_inc_users(struct sx9500_data *data, int *counter,
|
|
unsigned int reg, unsigned int bitmask)
|
|
{
|
|
(*counter)++;
|
|
if (*counter != 1)
|
|
/* Bit is already active, nothing to do. */
|
|
return 0;
|
|
|
|
return regmap_update_bits(data->regmap, reg, bitmask, bitmask);
|
|
}
|
|
|
|
static int sx9500_dec_users(struct sx9500_data *data, int *counter,
|
|
unsigned int reg, unsigned int bitmask)
|
|
{
|
|
(*counter)--;
|
|
if (*counter != 0)
|
|
/* There are more users, do not deactivate. */
|
|
return 0;
|
|
|
|
return regmap_update_bits(data->regmap, reg, bitmask, 0);
|
|
}
|
|
|
|
static int sx9500_inc_chan_users(struct sx9500_data *data, int chan)
|
|
{
|
|
return sx9500_inc_users(data, &data->channel_users[chan],
|
|
SX9500_REG_PROX_CTRL0, BIT(chan));
|
|
}
|
|
|
|
static int sx9500_dec_chan_users(struct sx9500_data *data, int chan)
|
|
{
|
|
return sx9500_dec_users(data, &data->channel_users[chan],
|
|
SX9500_REG_PROX_CTRL0, BIT(chan));
|
|
}
|
|
|
|
static int sx9500_inc_data_rdy_users(struct sx9500_data *data)
|
|
{
|
|
return sx9500_inc_users(data, &data->data_rdy_users,
|
|
SX9500_REG_IRQ_MSK, SX9500_CONVDONE_IRQ);
|
|
}
|
|
|
|
static int sx9500_dec_data_rdy_users(struct sx9500_data *data)
|
|
{
|
|
return sx9500_dec_users(data, &data->data_rdy_users,
|
|
SX9500_REG_IRQ_MSK, SX9500_CONVDONE_IRQ);
|
|
}
|
|
|
|
static int sx9500_inc_close_far_users(struct sx9500_data *data)
|
|
{
|
|
return sx9500_inc_users(data, &data->close_far_users,
|
|
SX9500_REG_IRQ_MSK,
|
|
SX9500_CLOSE_IRQ | SX9500_FAR_IRQ);
|
|
}
|
|
|
|
static int sx9500_dec_close_far_users(struct sx9500_data *data)
|
|
{
|
|
return sx9500_dec_users(data, &data->close_far_users,
|
|
SX9500_REG_IRQ_MSK,
|
|
SX9500_CLOSE_IRQ | SX9500_FAR_IRQ);
|
|
}
|
|
|
|
static int sx9500_read_prox_data(struct sx9500_data *data,
|
|
const struct iio_chan_spec *chan,
|
|
int *val)
|
|
{
|
|
int ret;
|
|
__be16 regval;
|
|
|
|
ret = regmap_write(data->regmap, SX9500_REG_SENSOR_SEL, chan->channel);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_bulk_read(data->regmap, SX9500_REG_USE_MSB, ®val, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = be16_to_cpu(regval);
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
/*
|
|
* If we have no interrupt support, we have to wait for a scan period
|
|
* after enabling a channel to get a result.
|
|
*/
|
|
static int sx9500_wait_for_sample(struct sx9500_data *data)
|
|
{
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = (val & SX9500_SCAN_PERIOD_MASK) >> SX9500_SCAN_PERIOD_SHIFT;
|
|
|
|
msleep(sx9500_scan_period_table[val]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sx9500_read_proximity(struct sx9500_data *data,
|
|
const struct iio_chan_spec *chan,
|
|
int *val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
ret = sx9500_inc_chan_users(data, chan->channel);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = sx9500_inc_data_rdy_users(data);
|
|
if (ret < 0)
|
|
goto out_dec_chan;
|
|
|
|
mutex_unlock(&data->mutex);
|
|
|
|
if (data->client->irq > 0)
|
|
ret = wait_for_completion_interruptible(&data->completion);
|
|
else
|
|
ret = sx9500_wait_for_sample(data);
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
if (ret < 0)
|
|
goto out_dec_data_rdy;
|
|
|
|
ret = sx9500_read_prox_data(data, chan, val);
|
|
if (ret < 0)
|
|
goto out_dec_data_rdy;
|
|
|
|
ret = sx9500_dec_data_rdy_users(data);
|
|
if (ret < 0)
|
|
goto out_dec_chan;
|
|
|
|
ret = sx9500_dec_chan_users(data, chan->channel);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = IIO_VAL_INT;
|
|
|
|
goto out;
|
|
|
|
out_dec_data_rdy:
|
|
sx9500_dec_data_rdy_users(data);
|
|
out_dec_chan:
|
|
sx9500_dec_chan_users(data, chan->channel);
|
|
out:
|
|
mutex_unlock(&data->mutex);
|
|
reinit_completion(&data->completion);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sx9500_read_samp_freq(struct sx9500_data *data,
|
|
int *val, int *val2)
|
|
{
|
|
int ret;
|
|
unsigned int regval;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, ®val);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
regval = (regval & SX9500_SCAN_PERIOD_MASK) >> SX9500_SCAN_PERIOD_SHIFT;
|
|
*val = sx9500_samp_freq_table[regval].val;
|
|
*val2 = sx9500_samp_freq_table[regval].val2;
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
|
|
static int sx9500_read_raw(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (chan->type) {
|
|
case IIO_PROXIMITY:
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
ret = sx9500_read_proximity(data, chan, val);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
return ret;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
return sx9500_read_samp_freq(data, val, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int sx9500_set_samp_freq(struct sx9500_data *data,
|
|
int val, int val2)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sx9500_samp_freq_table); i++)
|
|
if (val == sx9500_samp_freq_table[i].val &&
|
|
val2 == sx9500_samp_freq_table[i].val2)
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(sx9500_samp_freq_table))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
|
|
SX9500_SCAN_PERIOD_MASK,
|
|
i << SX9500_SCAN_PERIOD_SHIFT);
|
|
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sx9500_write_raw(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
|
|
switch (chan->type) {
|
|
case IIO_PROXIMITY:
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
return sx9500_set_samp_freq(data, val, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t sx9500_irq_handler(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
|
|
if (data->trigger_enabled)
|
|
iio_trigger_poll(data->trig);
|
|
|
|
/*
|
|
* Even if no event is enabled, we need to wake the thread to
|
|
* clear the interrupt state by reading SX9500_REG_IRQ_SRC. It
|
|
* is not possible to do that here because regmap_read takes a
|
|
* mutex.
|
|
*/
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static void sx9500_push_events(struct iio_dev *indio_dev)
|
|
{
|
|
int ret;
|
|
unsigned int val, chan;
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
|
|
ret = regmap_read(data->regmap, SX9500_REG_STAT, &val);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "i2c transfer error in irq\n");
|
|
return;
|
|
}
|
|
|
|
val >>= SX9500_PROXSTAT_SHIFT;
|
|
for (chan = 0; chan < SX9500_NUM_CHANNELS; chan++) {
|
|
int dir;
|
|
u64 ev;
|
|
bool new_prox = val & BIT(chan);
|
|
|
|
if (!data->event_enabled[chan])
|
|
continue;
|
|
if (new_prox == data->prox_stat[chan])
|
|
/* No change on this channel. */
|
|
continue;
|
|
|
|
dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
|
|
ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
|
|
IIO_EV_TYPE_THRESH, dir);
|
|
iio_push_event(indio_dev, ev, iio_get_time_ns(indio_dev));
|
|
data->prox_stat[chan] = new_prox;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t sx9500_irq_thread_handler(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "i2c transfer error in irq\n");
|
|
goto out;
|
|
}
|
|
|
|
if (val & (SX9500_CLOSE_IRQ | SX9500_FAR_IRQ))
|
|
sx9500_push_events(indio_dev);
|
|
|
|
if (val & SX9500_CONVDONE_IRQ)
|
|
complete(&data->completion);
|
|
|
|
out:
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sx9500_read_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
|
|
if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH ||
|
|
dir != IIO_EV_DIR_EITHER)
|
|
return -EINVAL;
|
|
|
|
return data->event_enabled[chan->channel];
|
|
}
|
|
|
|
static int sx9500_write_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
enum iio_event_type type,
|
|
enum iio_event_direction dir,
|
|
int state)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH ||
|
|
dir != IIO_EV_DIR_EITHER)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
if (state == 1) {
|
|
ret = sx9500_inc_chan_users(data, chan->channel);
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
ret = sx9500_inc_close_far_users(data);
|
|
if (ret < 0)
|
|
goto out_undo_chan;
|
|
} else {
|
|
ret = sx9500_dec_chan_users(data, chan->channel);
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
ret = sx9500_dec_close_far_users(data);
|
|
if (ret < 0)
|
|
goto out_undo_chan;
|
|
}
|
|
|
|
data->event_enabled[chan->channel] = state;
|
|
goto out_unlock;
|
|
|
|
out_undo_chan:
|
|
if (state == 1)
|
|
sx9500_dec_chan_users(data, chan->channel);
|
|
else
|
|
sx9500_inc_chan_users(data, chan->channel);
|
|
out_unlock:
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int sx9500_update_scan_mode(struct iio_dev *indio_dev,
|
|
const unsigned long *scan_mask)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
|
|
mutex_lock(&data->mutex);
|
|
kfree(data->buffer);
|
|
data->buffer = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
if (data->buffer == NULL)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
|
|
"2.500000 3.333333 5 6.666666 8.333333 11.111111 16.666666 33.333333");
|
|
|
|
static struct attribute *sx9500_attributes[] = {
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group sx9500_attribute_group = {
|
|
.attrs = sx9500_attributes,
|
|
};
|
|
|
|
static const struct iio_info sx9500_info = {
|
|
.attrs = &sx9500_attribute_group,
|
|
.read_raw = &sx9500_read_raw,
|
|
.write_raw = &sx9500_write_raw,
|
|
.read_event_config = &sx9500_read_event_config,
|
|
.write_event_config = &sx9500_write_event_config,
|
|
.update_scan_mode = &sx9500_update_scan_mode,
|
|
};
|
|
|
|
static int sx9500_set_trigger_state(struct iio_trigger *trig,
|
|
bool state)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
if (state)
|
|
ret = sx9500_inc_data_rdy_users(data);
|
|
else
|
|
ret = sx9500_dec_data_rdy_users(data);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
data->trigger_enabled = state;
|
|
|
|
out:
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_trigger_ops sx9500_trigger_ops = {
|
|
.set_trigger_state = sx9500_set_trigger_state,
|
|
};
|
|
|
|
static irqreturn_t sx9500_trigger_handler(int irq, void *private)
|
|
{
|
|
struct iio_poll_func *pf = private;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int val, bit, ret, i = 0;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
for_each_set_bit(bit, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
ret = sx9500_read_prox_data(data, &indio_dev->channels[bit],
|
|
&val);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
data->buffer[i++] = val;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
out:
|
|
mutex_unlock(&data->mutex);
|
|
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sx9500_buffer_preenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret = 0, i;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
for (i = 0; i < SX9500_NUM_CHANNELS; i++)
|
|
if (test_bit(i, indio_dev->active_scan_mask)) {
|
|
ret = sx9500_inc_chan_users(data, i);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
for (i = i - 1; i >= 0; i--)
|
|
if (test_bit(i, indio_dev->active_scan_mask))
|
|
sx9500_dec_chan_users(data, i);
|
|
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sx9500_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret = 0, i;
|
|
|
|
iio_triggered_buffer_predisable(indio_dev);
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
for (i = 0; i < SX9500_NUM_CHANNELS; i++)
|
|
if (test_bit(i, indio_dev->active_scan_mask)) {
|
|
ret = sx9500_dec_chan_users(data, i);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
for (i = i - 1; i >= 0; i--)
|
|
if (test_bit(i, indio_dev->active_scan_mask))
|
|
sx9500_inc_chan_users(data, i);
|
|
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops sx9500_buffer_setup_ops = {
|
|
.preenable = sx9500_buffer_preenable,
|
|
.postenable = iio_triggered_buffer_postenable,
|
|
.predisable = sx9500_buffer_predisable,
|
|
};
|
|
|
|
struct sx9500_reg_default {
|
|
u8 reg;
|
|
u8 def;
|
|
};
|
|
|
|
static const struct sx9500_reg_default sx9500_default_regs[] = {
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL1,
|
|
/* Shield enabled, small range. */
|
|
.def = 0x43,
|
|
},
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL2,
|
|
/* x8 gain, 167kHz frequency, finest resolution. */
|
|
.def = 0x77,
|
|
},
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL3,
|
|
/* Doze enabled, 2x scan period doze, no raw filter. */
|
|
.def = 0x40,
|
|
},
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL4,
|
|
/* Average threshold. */
|
|
.def = 0x30,
|
|
},
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL5,
|
|
/*
|
|
* Debouncer off, lowest average negative filter,
|
|
* highest average postive filter.
|
|
*/
|
|
.def = 0x0f,
|
|
},
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL6,
|
|
/* Proximity detection threshold: 280 */
|
|
.def = 0x0e,
|
|
},
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL7,
|
|
/*
|
|
* No automatic compensation, compensate each pin
|
|
* independently, proximity hysteresis: 32, close
|
|
* debouncer off, far debouncer off.
|
|
*/
|
|
.def = 0x00,
|
|
},
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL8,
|
|
/* No stuck timeout, no periodic compensation. */
|
|
.def = 0x00,
|
|
},
|
|
{
|
|
.reg = SX9500_REG_PROX_CTRL0,
|
|
/* Scan period: 30ms, all sensors disabled. */
|
|
.def = 0x00,
|
|
},
|
|
};
|
|
|
|
/* Activate all channels and perform an initial compensation. */
|
|
static int sx9500_init_compensation(struct iio_dev *indio_dev)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int i, ret;
|
|
unsigned int val;
|
|
|
|
ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
|
|
SX9500_CHAN_MASK, SX9500_CHAN_MASK);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 10; i >= 0; i--) {
|
|
usleep_range(10000, 20000);
|
|
ret = regmap_read(data->regmap, SX9500_REG_STAT, &val);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (!(val & SX9500_COMPSTAT_MASK))
|
|
break;
|
|
}
|
|
|
|
if (i < 0) {
|
|
dev_err(&data->client->dev, "initial compensation timed out");
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
|
|
out:
|
|
regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
|
|
SX9500_CHAN_MASK, 0);
|
|
return ret;
|
|
}
|
|
|
|
static int sx9500_init_device(struct iio_dev *indio_dev)
|
|
{
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret, i;
|
|
unsigned int val;
|
|
|
|
if (data->gpiod_rst) {
|
|
gpiod_set_value_cansleep(data->gpiod_rst, 0);
|
|
usleep_range(1000, 2000);
|
|
gpiod_set_value_cansleep(data->gpiod_rst, 1);
|
|
usleep_range(1000, 2000);
|
|
}
|
|
|
|
ret = regmap_write(data->regmap, SX9500_REG_IRQ_MSK, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_write(data->regmap, SX9500_REG_RESET,
|
|
SX9500_SOFT_RESET);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sx9500_default_regs); i++) {
|
|
ret = regmap_write(data->regmap,
|
|
sx9500_default_regs[i].reg,
|
|
sx9500_default_regs[i].def);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return sx9500_init_compensation(indio_dev);
|
|
}
|
|
|
|
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
|
|
static const struct acpi_gpio_params interrupt_gpios = { 2, 0, false };
|
|
|
|
static const struct acpi_gpio_mapping acpi_sx9500_gpios[] = {
|
|
{ "reset-gpios", &reset_gpios, 1 },
|
|
/*
|
|
* Some platforms have a bug in ACPI GPIO description making IRQ
|
|
* GPIO to be output only. Ask the GPIO core to ignore this limit.
|
|
*/
|
|
{ "interrupt-gpios", &interrupt_gpios, 1, ACPI_GPIO_QUIRK_NO_IO_RESTRICTION },
|
|
{ },
|
|
};
|
|
|
|
static void sx9500_gpio_probe(struct i2c_client *client,
|
|
struct sx9500_data *data)
|
|
{
|
|
struct gpio_desc *gpiod_int;
|
|
struct device *dev;
|
|
int ret;
|
|
|
|
if (!client)
|
|
return;
|
|
|
|
dev = &client->dev;
|
|
|
|
ret = devm_acpi_dev_add_driver_gpios(dev, acpi_sx9500_gpios);
|
|
if (ret)
|
|
dev_dbg(dev, "Unable to add GPIO mapping table\n");
|
|
|
|
if (client->irq <= 0) {
|
|
gpiod_int = devm_gpiod_get(dev, "interrupt", GPIOD_IN);
|
|
if (IS_ERR(gpiod_int))
|
|
dev_err(dev, "gpio get irq failed\n");
|
|
else
|
|
client->irq = gpiod_to_irq(gpiod_int);
|
|
}
|
|
|
|
data->gpiod_rst = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(data->gpiod_rst)) {
|
|
dev_warn(dev, "gpio get reset pin failed\n");
|
|
data->gpiod_rst = NULL;
|
|
}
|
|
}
|
|
|
|
static int sx9500_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct iio_dev *indio_dev;
|
|
struct sx9500_data *data;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->client = client;
|
|
mutex_init(&data->mutex);
|
|
init_completion(&data->completion);
|
|
data->trigger_enabled = false;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &sx9500_regmap_config);
|
|
if (IS_ERR(data->regmap))
|
|
return PTR_ERR(data->regmap);
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->name = SX9500_DRIVER_NAME;
|
|
indio_dev->channels = sx9500_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(sx9500_channels);
|
|
indio_dev->info = &sx9500_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
i2c_set_clientdata(client, indio_dev);
|
|
|
|
sx9500_gpio_probe(client, data);
|
|
|
|
ret = sx9500_init_device(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (client->irq <= 0)
|
|
dev_warn(&client->dev, "no valid irq found\n");
|
|
else {
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
sx9500_irq_handler, sx9500_irq_thread_handler,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
SX9500_IRQ_NAME, indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->trig = devm_iio_trigger_alloc(&client->dev,
|
|
"%s-dev%d", indio_dev->name, indio_dev->id);
|
|
if (!data->trig)
|
|
return -ENOMEM;
|
|
|
|
data->trig->dev.parent = &client->dev;
|
|
data->trig->ops = &sx9500_trigger_ops;
|
|
iio_trigger_set_drvdata(data->trig, indio_dev);
|
|
|
|
ret = iio_trigger_register(data->trig);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
sx9500_trigger_handler,
|
|
&sx9500_buffer_setup_ops);
|
|
if (ret < 0)
|
|
goto out_trigger_unregister;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto out_buffer_cleanup;
|
|
|
|
return 0;
|
|
|
|
out_buffer_cleanup:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
out_trigger_unregister:
|
|
if (client->irq > 0)
|
|
iio_trigger_unregister(data->trig);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sx9500_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
if (client->irq > 0)
|
|
iio_trigger_unregister(data->trig);
|
|
kfree(data->buffer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sx9500_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0,
|
|
&data->suspend_ctrl0);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/*
|
|
* Scan period doesn't matter because when all the sensors are
|
|
* deactivated the device is in sleep mode.
|
|
*/
|
|
ret = regmap_write(data->regmap, SX9500_REG_PROX_CTRL0, 0);
|
|
|
|
out:
|
|
mutex_unlock(&data->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int sx9500_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct sx9500_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
ret = regmap_write(data->regmap, SX9500_REG_PROX_CTRL0,
|
|
data->suspend_ctrl0);
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static const struct dev_pm_ops sx9500_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(sx9500_suspend, sx9500_resume)
|
|
};
|
|
|
|
static const struct acpi_device_id sx9500_acpi_match[] = {
|
|
{"SSX9500", 0},
|
|
{"SASX9500", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, sx9500_acpi_match);
|
|
|
|
static const struct of_device_id sx9500_of_match[] = {
|
|
{ .compatible = "semtech,sx9500", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sx9500_of_match);
|
|
|
|
static const struct i2c_device_id sx9500_id[] = {
|
|
{"sx9500", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sx9500_id);
|
|
|
|
static struct i2c_driver sx9500_driver = {
|
|
.driver = {
|
|
.name = SX9500_DRIVER_NAME,
|
|
.acpi_match_table = ACPI_PTR(sx9500_acpi_match),
|
|
.of_match_table = of_match_ptr(sx9500_of_match),
|
|
.pm = &sx9500_pm_ops,
|
|
},
|
|
.probe = sx9500_probe,
|
|
.remove = sx9500_remove,
|
|
.id_table = sx9500_id,
|
|
};
|
|
module_i2c_driver(sx9500_driver);
|
|
|
|
MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
|
|
MODULE_DESCRIPTION("Driver for Semtech SX9500 proximity sensor");
|
|
MODULE_LICENSE("GPL v2");
|