![Alan Cox](/assets/img/avatar_default.png)
- Make ata_sff_altstatus private so nobody uses it by mistake - Drop the 400nS delay from it Add ata_sff_irq_status - encapsulates the IRQ check logic This function keeps the existing behaviour for altstatus using devices. I actually suspect the logic was wrong before the changes but -rc isn't the time to play with that ata_sff_sync - ensure writes hit the device Really we want an io* operation for 'is posted' eg ioisposted(ioaddr) so that we can fix the nasty delay this causes on most systems. - ata_sff_pause - 400nS delay Ensure the command hit the device and delay 400nS - ata_sff_dma_pause Ensure the I/O hit the device and enforce an HDMA1:0 transition delay. Requires altstatus register exists, BUG if not so we don't risk corruption in MWDMA modes. (UDMA the checksum will save your backside in theory) The only other complication then is devices with their own handlers. rb532 can use dma_pause but scc needs to access its own altstatus register for internal errata workarounds so directly call the drivers own altstatus function. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
1190 lines
30 KiB
C
1190 lines
30 KiB
C
/*
|
|
* Support for IDE interfaces on Celleb platform
|
|
*
|
|
* (C) Copyright 2006 TOSHIBA CORPORATION
|
|
*
|
|
* This code is based on drivers/ata/ata_piix.c:
|
|
* Copyright 2003-2005 Red Hat Inc
|
|
* Copyright 2003-2005 Jeff Garzik
|
|
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
|
|
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
|
|
*
|
|
* and drivers/ata/ahci.c:
|
|
* Copyright 2004-2005 Red Hat, Inc.
|
|
*
|
|
* and drivers/ata/libata-core.c:
|
|
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2004 Jeff Garzik
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_scc"
|
|
#define DRV_VERSION "0.3"
|
|
|
|
#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
|
|
|
|
/* PCI BARs */
|
|
#define SCC_CTRL_BAR 0
|
|
#define SCC_BMID_BAR 1
|
|
|
|
/* offset of CTRL registers */
|
|
#define SCC_CTL_PIOSHT 0x000
|
|
#define SCC_CTL_PIOCT 0x004
|
|
#define SCC_CTL_MDMACT 0x008
|
|
#define SCC_CTL_MCRCST 0x00C
|
|
#define SCC_CTL_SDMACT 0x010
|
|
#define SCC_CTL_SCRCST 0x014
|
|
#define SCC_CTL_UDENVT 0x018
|
|
#define SCC_CTL_TDVHSEL 0x020
|
|
#define SCC_CTL_MODEREG 0x024
|
|
#define SCC_CTL_ECMODE 0xF00
|
|
#define SCC_CTL_MAEA0 0xF50
|
|
#define SCC_CTL_MAEC0 0xF54
|
|
#define SCC_CTL_CCKCTRL 0xFF0
|
|
|
|
/* offset of BMID registers */
|
|
#define SCC_DMA_CMD 0x000
|
|
#define SCC_DMA_STATUS 0x004
|
|
#define SCC_DMA_TABLE_OFS 0x008
|
|
#define SCC_DMA_INTMASK 0x010
|
|
#define SCC_DMA_INTST 0x014
|
|
#define SCC_DMA_PTERADD 0x018
|
|
#define SCC_REG_CMD_ADDR 0x020
|
|
#define SCC_REG_DATA 0x000
|
|
#define SCC_REG_ERR 0x004
|
|
#define SCC_REG_FEATURE 0x004
|
|
#define SCC_REG_NSECT 0x008
|
|
#define SCC_REG_LBAL 0x00C
|
|
#define SCC_REG_LBAM 0x010
|
|
#define SCC_REG_LBAH 0x014
|
|
#define SCC_REG_DEVICE 0x018
|
|
#define SCC_REG_STATUS 0x01C
|
|
#define SCC_REG_CMD 0x01C
|
|
#define SCC_REG_ALTSTATUS 0x020
|
|
|
|
/* register value */
|
|
#define TDVHSEL_MASTER 0x00000001
|
|
#define TDVHSEL_SLAVE 0x00000004
|
|
|
|
#define MODE_JCUSFEN 0x00000080
|
|
|
|
#define ECMODE_VALUE 0x01
|
|
|
|
#define CCKCTRL_ATARESET 0x00040000
|
|
#define CCKCTRL_BUFCNT 0x00020000
|
|
#define CCKCTRL_CRST 0x00010000
|
|
#define CCKCTRL_OCLKEN 0x00000100
|
|
#define CCKCTRL_ATACLKOEN 0x00000002
|
|
#define CCKCTRL_LCLKEN 0x00000001
|
|
|
|
#define QCHCD_IOS_SS 0x00000001
|
|
|
|
#define QCHSD_STPDIAG 0x00020000
|
|
|
|
#define INTMASK_MSK 0xD1000012
|
|
#define INTSTS_SERROR 0x80000000
|
|
#define INTSTS_PRERR 0x40000000
|
|
#define INTSTS_RERR 0x10000000
|
|
#define INTSTS_ICERR 0x01000000
|
|
#define INTSTS_BMSINT 0x00000010
|
|
#define INTSTS_BMHE 0x00000008
|
|
#define INTSTS_IOIRQS 0x00000004
|
|
#define INTSTS_INTRQ 0x00000002
|
|
#define INTSTS_ACTEINT 0x00000001
|
|
|
|
|
|
/* PIO transfer mode table */
|
|
/* JCHST */
|
|
static const unsigned long JCHSTtbl[2][7] = {
|
|
{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
|
|
{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCHHT */
|
|
static const unsigned long JCHHTtbl[2][7] = {
|
|
{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
|
|
{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCHCT */
|
|
static const unsigned long JCHCTtbl[2][7] = {
|
|
{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
|
|
{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* DMA transfer mode table */
|
|
/* JCHDCTM/JCHDCTS */
|
|
static const unsigned long JCHDCTxtbl[2][7] = {
|
|
{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
|
|
{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCSTWTM/JCSTWTS */
|
|
static const unsigned long JCSTWTxtbl[2][7] = {
|
|
{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
|
|
{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
|
|
};
|
|
|
|
/* JCTSS */
|
|
static const unsigned long JCTSStbl[2][7] = {
|
|
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
|
|
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
|
|
};
|
|
|
|
/* JCENVT */
|
|
static const unsigned long JCENVTtbl[2][7] = {
|
|
{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
|
|
{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
|
|
};
|
|
|
|
/* JCACTSELS/JCACTSELM */
|
|
static const unsigned long JCACTSELtbl[2][7] = {
|
|
{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
|
|
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
|
|
};
|
|
|
|
static const struct pci_device_id scc_pci_tbl[] = {
|
|
{PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
/**
|
|
* scc_set_piomode - Initialize host controller PATA PIO timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
*
|
|
* Set PIO mode for device.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int pio = adev->pio_mode - XFER_PIO_0;
|
|
void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
|
|
void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
|
|
void __iomem *piosht_port = ctrl_base + SCC_CTL_PIOSHT;
|
|
void __iomem *pioct_port = ctrl_base + SCC_CTL_PIOCT;
|
|
unsigned long reg;
|
|
int offset;
|
|
|
|
reg = in_be32(cckctrl_port);
|
|
if (reg & CCKCTRL_ATACLKOEN)
|
|
offset = 1; /* 133MHz */
|
|
else
|
|
offset = 0; /* 100MHz */
|
|
|
|
reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
|
|
out_be32(piosht_port, reg);
|
|
reg = JCHCTtbl[offset][pio];
|
|
out_be32(pioct_port, reg);
|
|
}
|
|
|
|
/**
|
|
* scc_set_dmamode - Initialize host controller PATA DMA timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
* @udma: udma mode, 0 - 6
|
|
*
|
|
* Set UDMA mode for device.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int udma = adev->dma_mode;
|
|
unsigned int is_slave = (adev->devno != 0);
|
|
u8 speed = udma;
|
|
void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
|
|
void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
|
|
void __iomem *mdmact_port = ctrl_base + SCC_CTL_MDMACT;
|
|
void __iomem *mcrcst_port = ctrl_base + SCC_CTL_MCRCST;
|
|
void __iomem *sdmact_port = ctrl_base + SCC_CTL_SDMACT;
|
|
void __iomem *scrcst_port = ctrl_base + SCC_CTL_SCRCST;
|
|
void __iomem *udenvt_port = ctrl_base + SCC_CTL_UDENVT;
|
|
void __iomem *tdvhsel_port = ctrl_base + SCC_CTL_TDVHSEL;
|
|
int offset, idx;
|
|
|
|
if (in_be32(cckctrl_port) & CCKCTRL_ATACLKOEN)
|
|
offset = 1; /* 133MHz */
|
|
else
|
|
offset = 0; /* 100MHz */
|
|
|
|
if (speed >= XFER_UDMA_0)
|
|
idx = speed - XFER_UDMA_0;
|
|
else
|
|
return;
|
|
|
|
if (is_slave) {
|
|
out_be32(sdmact_port, JCHDCTxtbl[offset][idx]);
|
|
out_be32(scrcst_port, JCSTWTxtbl[offset][idx]);
|
|
out_be32(tdvhsel_port,
|
|
(in_be32(tdvhsel_port) & ~TDVHSEL_SLAVE) | (JCACTSELtbl[offset][idx] << 2));
|
|
} else {
|
|
out_be32(mdmact_port, JCHDCTxtbl[offset][idx]);
|
|
out_be32(mcrcst_port, JCSTWTxtbl[offset][idx]);
|
|
out_be32(tdvhsel_port,
|
|
(in_be32(tdvhsel_port) & ~TDVHSEL_MASTER) | JCACTSELtbl[offset][idx]);
|
|
}
|
|
out_be32(udenvt_port,
|
|
JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]);
|
|
}
|
|
|
|
unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
|
|
{
|
|
/* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
|
|
if (adev->class == ATA_DEV_ATAPI &&
|
|
(mask & (0xE0 << ATA_SHIFT_UDMA))) {
|
|
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
|
|
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
|
|
}
|
|
return ata_bmdma_mode_filter(adev, mask);
|
|
}
|
|
|
|
/**
|
|
* scc_tf_load - send taskfile registers to host controller
|
|
* @ap: Port to which output is sent
|
|
* @tf: ATA taskfile register set
|
|
*
|
|
* Note: Original code is ata_sff_tf_load().
|
|
*/
|
|
|
|
static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
|
|
|
|
if (tf->ctl != ap->last_ctl) {
|
|
out_be32(ioaddr->ctl_addr, tf->ctl);
|
|
ap->last_ctl = tf->ctl;
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
|
|
out_be32(ioaddr->feature_addr, tf->hob_feature);
|
|
out_be32(ioaddr->nsect_addr, tf->hob_nsect);
|
|
out_be32(ioaddr->lbal_addr, tf->hob_lbal);
|
|
out_be32(ioaddr->lbam_addr, tf->hob_lbam);
|
|
out_be32(ioaddr->lbah_addr, tf->hob_lbah);
|
|
VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
|
|
tf->hob_feature,
|
|
tf->hob_nsect,
|
|
tf->hob_lbal,
|
|
tf->hob_lbam,
|
|
tf->hob_lbah);
|
|
}
|
|
|
|
if (is_addr) {
|
|
out_be32(ioaddr->feature_addr, tf->feature);
|
|
out_be32(ioaddr->nsect_addr, tf->nsect);
|
|
out_be32(ioaddr->lbal_addr, tf->lbal);
|
|
out_be32(ioaddr->lbam_addr, tf->lbam);
|
|
out_be32(ioaddr->lbah_addr, tf->lbah);
|
|
VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
|
|
tf->feature,
|
|
tf->nsect,
|
|
tf->lbal,
|
|
tf->lbam,
|
|
tf->lbah);
|
|
}
|
|
|
|
if (tf->flags & ATA_TFLAG_DEVICE) {
|
|
out_be32(ioaddr->device_addr, tf->device);
|
|
VPRINTK("device 0x%X\n", tf->device);
|
|
}
|
|
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
/**
|
|
* scc_check_status - Read device status reg & clear interrupt
|
|
* @ap: port where the device is
|
|
*
|
|
* Note: Original code is ata_check_status().
|
|
*/
|
|
|
|
static u8 scc_check_status (struct ata_port *ap)
|
|
{
|
|
return in_be32(ap->ioaddr.status_addr);
|
|
}
|
|
|
|
/**
|
|
* scc_tf_read - input device's ATA taskfile shadow registers
|
|
* @ap: Port from which input is read
|
|
* @tf: ATA taskfile register set for storing input
|
|
*
|
|
* Note: Original code is ata_sff_tf_read().
|
|
*/
|
|
|
|
static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
tf->command = scc_check_status(ap);
|
|
tf->feature = in_be32(ioaddr->error_addr);
|
|
tf->nsect = in_be32(ioaddr->nsect_addr);
|
|
tf->lbal = in_be32(ioaddr->lbal_addr);
|
|
tf->lbam = in_be32(ioaddr->lbam_addr);
|
|
tf->lbah = in_be32(ioaddr->lbah_addr);
|
|
tf->device = in_be32(ioaddr->device_addr);
|
|
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
out_be32(ioaddr->ctl_addr, tf->ctl | ATA_HOB);
|
|
tf->hob_feature = in_be32(ioaddr->error_addr);
|
|
tf->hob_nsect = in_be32(ioaddr->nsect_addr);
|
|
tf->hob_lbal = in_be32(ioaddr->lbal_addr);
|
|
tf->hob_lbam = in_be32(ioaddr->lbam_addr);
|
|
tf->hob_lbah = in_be32(ioaddr->lbah_addr);
|
|
out_be32(ioaddr->ctl_addr, tf->ctl);
|
|
ap->last_ctl = tf->ctl;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* scc_exec_command - issue ATA command to host controller
|
|
* @ap: port to which command is being issued
|
|
* @tf: ATA taskfile register set
|
|
*
|
|
* Note: Original code is ata_sff_exec_command().
|
|
*/
|
|
|
|
static void scc_exec_command (struct ata_port *ap,
|
|
const struct ata_taskfile *tf)
|
|
{
|
|
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
|
|
|
|
out_be32(ap->ioaddr.command_addr, tf->command);
|
|
ata_sff_pause(ap);
|
|
}
|
|
|
|
/**
|
|
* scc_check_altstatus - Read device alternate status reg
|
|
* @ap: port where the device is
|
|
*/
|
|
|
|
static u8 scc_check_altstatus (struct ata_port *ap)
|
|
{
|
|
return in_be32(ap->ioaddr.altstatus_addr);
|
|
}
|
|
|
|
/**
|
|
* scc_dev_select - Select device 0/1 on ATA bus
|
|
* @ap: ATA channel to manipulate
|
|
* @device: ATA device (numbered from zero) to select
|
|
*
|
|
* Note: Original code is ata_sff_dev_select().
|
|
*/
|
|
|
|
static void scc_dev_select (struct ata_port *ap, unsigned int device)
|
|
{
|
|
u8 tmp;
|
|
|
|
if (device == 0)
|
|
tmp = ATA_DEVICE_OBS;
|
|
else
|
|
tmp = ATA_DEVICE_OBS | ATA_DEV1;
|
|
|
|
out_be32(ap->ioaddr.device_addr, tmp);
|
|
ata_sff_pause(ap);
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_setup - Set up PCI IDE BMDMA transaction
|
|
* @qc: Info associated with this ATA transaction.
|
|
*
|
|
* Note: Original code is ata_bmdma_setup().
|
|
*/
|
|
|
|
static void scc_bmdma_setup (struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
|
|
u8 dmactl;
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
/* load PRD table addr */
|
|
out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma);
|
|
|
|
/* specify data direction, triple-check start bit is clear */
|
|
dmactl = in_be32(mmio + SCC_DMA_CMD);
|
|
dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
|
|
if (!rw)
|
|
dmactl |= ATA_DMA_WR;
|
|
out_be32(mmio + SCC_DMA_CMD, dmactl);
|
|
|
|
/* issue r/w command */
|
|
ap->ops->sff_exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_start - Start a PCI IDE BMDMA transaction
|
|
* @qc: Info associated with this ATA transaction.
|
|
*
|
|
* Note: Original code is ata_bmdma_start().
|
|
*/
|
|
|
|
static void scc_bmdma_start (struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
u8 dmactl;
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
/* start host DMA transaction */
|
|
dmactl = in_be32(mmio + SCC_DMA_CMD);
|
|
out_be32(mmio + SCC_DMA_CMD, dmactl | ATA_DMA_START);
|
|
}
|
|
|
|
/**
|
|
* scc_devchk - PATA device presence detection
|
|
* @ap: ATA channel to examine
|
|
* @device: Device to examine (starting at zero)
|
|
*
|
|
* Note: Original code is ata_devchk().
|
|
*/
|
|
|
|
static unsigned int scc_devchk (struct ata_port *ap,
|
|
unsigned int device)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
u8 nsect, lbal;
|
|
|
|
ap->ops->sff_dev_select(ap, device);
|
|
|
|
out_be32(ioaddr->nsect_addr, 0x55);
|
|
out_be32(ioaddr->lbal_addr, 0xaa);
|
|
|
|
out_be32(ioaddr->nsect_addr, 0xaa);
|
|
out_be32(ioaddr->lbal_addr, 0x55);
|
|
|
|
out_be32(ioaddr->nsect_addr, 0x55);
|
|
out_be32(ioaddr->lbal_addr, 0xaa);
|
|
|
|
nsect = in_be32(ioaddr->nsect_addr);
|
|
lbal = in_be32(ioaddr->lbal_addr);
|
|
|
|
if ((nsect == 0x55) && (lbal == 0xaa))
|
|
return 1; /* we found a device */
|
|
|
|
return 0; /* nothing found */
|
|
}
|
|
|
|
/**
|
|
* scc_wait_after_reset - wait for devices to become ready after reset
|
|
*
|
|
* Note: Original code is ata_sff_wait_after_reset
|
|
*/
|
|
|
|
int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned int dev0 = devmask & (1 << 0);
|
|
unsigned int dev1 = devmask & (1 << 1);
|
|
int rc, ret = 0;
|
|
|
|
/* Spec mandates ">= 2ms" before checking status. We wait
|
|
* 150ms, because that was the magic delay used for ATAPI
|
|
* devices in Hale Landis's ATADRVR, for the period of time
|
|
* between when the ATA command register is written, and then
|
|
* status is checked. Because waiting for "a while" before
|
|
* checking status is fine, post SRST, we perform this magic
|
|
* delay here as well.
|
|
*
|
|
* Old drivers/ide uses the 2mS rule and then waits for ready.
|
|
*/
|
|
msleep(150);
|
|
|
|
/* always check readiness of the master device */
|
|
rc = ata_sff_wait_ready(link, deadline);
|
|
/* -ENODEV means the odd clown forgot the D7 pulldown resistor
|
|
* and TF status is 0xff, bail out on it too.
|
|
*/
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* if device 1 was found in ata_devchk, wait for register
|
|
* access briefly, then wait for BSY to clear.
|
|
*/
|
|
if (dev1) {
|
|
int i;
|
|
|
|
ap->ops->sff_dev_select(ap, 1);
|
|
|
|
/* Wait for register access. Some ATAPI devices fail
|
|
* to set nsect/lbal after reset, so don't waste too
|
|
* much time on it. We're gonna wait for !BSY anyway.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
u8 nsect, lbal;
|
|
|
|
nsect = in_be32(ioaddr->nsect_addr);
|
|
lbal = in_be32(ioaddr->lbal_addr);
|
|
if ((nsect == 1) && (lbal == 1))
|
|
break;
|
|
msleep(50); /* give drive a breather */
|
|
}
|
|
|
|
rc = ata_sff_wait_ready(link, deadline);
|
|
if (rc) {
|
|
if (rc != -ENODEV)
|
|
return rc;
|
|
ret = rc;
|
|
}
|
|
}
|
|
|
|
/* is all this really necessary? */
|
|
ap->ops->sff_dev_select(ap, 0);
|
|
if (dev1)
|
|
ap->ops->sff_dev_select(ap, 1);
|
|
if (dev0)
|
|
ap->ops->sff_dev_select(ap, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* scc_bus_softreset - PATA device software reset
|
|
*
|
|
* Note: Original code is ata_bus_softreset().
|
|
*/
|
|
|
|
static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
|
|
|
|
/* software reset. causes dev0 to be selected */
|
|
out_be32(ioaddr->ctl_addr, ap->ctl);
|
|
udelay(20);
|
|
out_be32(ioaddr->ctl_addr, ap->ctl | ATA_SRST);
|
|
udelay(20);
|
|
out_be32(ioaddr->ctl_addr, ap->ctl);
|
|
|
|
scc_wait_after_reset(&ap->link, devmask, deadline);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_softreset - reset host port via ATA SRST
|
|
* @ap: port to reset
|
|
* @classes: resulting classes of attached devices
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Note: Original code is ata_sff_softreset().
|
|
*/
|
|
|
|
static int scc_softreset(struct ata_link *link, unsigned int *classes,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
|
|
unsigned int devmask = 0, err_mask;
|
|
u8 err;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* determine if device 0/1 are present */
|
|
if (scc_devchk(ap, 0))
|
|
devmask |= (1 << 0);
|
|
if (slave_possible && scc_devchk(ap, 1))
|
|
devmask |= (1 << 1);
|
|
|
|
/* select device 0 again */
|
|
ap->ops->sff_dev_select(ap, 0);
|
|
|
|
/* issue bus reset */
|
|
DPRINTK("about to softreset, devmask=%x\n", devmask);
|
|
err_mask = scc_bus_softreset(ap, devmask, deadline);
|
|
if (err_mask) {
|
|
ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
|
|
err_mask);
|
|
return -EIO;
|
|
}
|
|
|
|
/* determine by signature whether we have ATA or ATAPI devices */
|
|
classes[0] = ata_sff_dev_classify(&ap->link.device[0],
|
|
devmask & (1 << 0), &err);
|
|
if (slave_possible && err != 0x81)
|
|
classes[1] = ata_sff_dev_classify(&ap->link.device[1],
|
|
devmask & (1 << 1), &err);
|
|
|
|
DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_stop - Stop PCI IDE BMDMA transfer
|
|
* @qc: Command we are ending DMA for
|
|
*/
|
|
|
|
static void scc_bmdma_stop (struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *ctrl_base = ap->host->iomap[SCC_CTRL_BAR];
|
|
void __iomem *bmid_base = ap->host->iomap[SCC_BMID_BAR];
|
|
u32 reg;
|
|
|
|
while (1) {
|
|
reg = in_be32(bmid_base + SCC_DMA_INTST);
|
|
|
|
if (reg & INTSTS_SERROR) {
|
|
printk(KERN_WARNING "%s: SERROR\n", DRV_NAME);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_SERROR|INTSTS_BMSINT);
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_PRERR) {
|
|
u32 maea0, maec0;
|
|
maea0 = in_be32(ctrl_base + SCC_CTL_MAEA0);
|
|
maec0 = in_be32(ctrl_base + SCC_CTL_MAEC0);
|
|
printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", DRV_NAME, maea0, maec0);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_PRERR|INTSTS_BMSINT);
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_RERR) {
|
|
printk(KERN_WARNING "%s: Response Error\n", DRV_NAME);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_RERR|INTSTS_BMSINT);
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_ICERR) {
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
printk(KERN_WARNING "%s: Illegal Configuration\n", DRV_NAME);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ICERR|INTSTS_BMSINT);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_BMSINT) {
|
|
unsigned int classes;
|
|
unsigned long deadline = jiffies + ATA_TMOUT_BOOT;
|
|
printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
|
|
/* TBD: SW reset */
|
|
scc_softreset(&ap->link, &classes, deadline);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_BMHE) {
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMHE);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_ACTEINT) {
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_ACTEINT);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_IOIRQS) {
|
|
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_IOIRQS);
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* clear start/stop bit */
|
|
out_be32(bmid_base + SCC_DMA_CMD,
|
|
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
|
|
|
|
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
|
|
ata_sff_dma_pause(ap); /* dummy read */
|
|
}
|
|
|
|
/**
|
|
* scc_bmdma_status - Read PCI IDE BMDMA status
|
|
* @ap: Port associated with this ATA transaction.
|
|
*/
|
|
|
|
static u8 scc_bmdma_status (struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
|
|
u32 int_status = in_be32(mmio + SCC_DMA_INTST);
|
|
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
static int retry = 0;
|
|
|
|
/* return if IOS_SS is cleared */
|
|
if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
|
|
return host_stat;
|
|
|
|
/* errata A252,A308 workaround: Step4 */
|
|
if ((scc_check_altstatus(ap) & ATA_ERR)
|
|
&& (int_status & INTSTS_INTRQ))
|
|
return (host_stat | ATA_DMA_INTR);
|
|
|
|
/* errata A308 workaround Step5 */
|
|
if (int_status & INTSTS_IOIRQS) {
|
|
host_stat |= ATA_DMA_INTR;
|
|
|
|
/* We don't check ATAPI DMA because it is limited to UDMA4 */
|
|
if ((qc->tf.protocol == ATA_PROT_DMA &&
|
|
qc->dev->xfer_mode > XFER_UDMA_4)) {
|
|
if (!(int_status & INTSTS_ACTEINT)) {
|
|
printk(KERN_WARNING "ata%u: operation failed (transfer data loss)\n",
|
|
ap->print_id);
|
|
host_stat |= ATA_DMA_ERR;
|
|
if (retry++)
|
|
ap->udma_mask &= ~(1 << qc->dev->xfer_mode);
|
|
} else
|
|
retry = 0;
|
|
}
|
|
}
|
|
|
|
return host_stat;
|
|
}
|
|
|
|
/**
|
|
* scc_data_xfer - Transfer data by PIO
|
|
* @dev: device for this I/O
|
|
* @buf: data buffer
|
|
* @buflen: buffer length
|
|
* @rw: read/write
|
|
*
|
|
* Note: Original code is ata_sff_data_xfer().
|
|
*/
|
|
|
|
static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
|
|
unsigned int buflen, int rw)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
unsigned int words = buflen >> 1;
|
|
unsigned int i;
|
|
__le16 *buf16 = (__le16 *) buf;
|
|
void __iomem *mmio = ap->ioaddr.data_addr;
|
|
|
|
/* Transfer multiple of 2 bytes */
|
|
if (rw == READ)
|
|
for (i = 0; i < words; i++)
|
|
buf16[i] = cpu_to_le16(in_be32(mmio));
|
|
else
|
|
for (i = 0; i < words; i++)
|
|
out_be32(mmio, le16_to_cpu(buf16[i]));
|
|
|
|
/* Transfer trailing 1 byte, if any. */
|
|
if (unlikely(buflen & 0x01)) {
|
|
__le16 align_buf[1] = { 0 };
|
|
unsigned char *trailing_buf = buf + buflen - 1;
|
|
|
|
if (rw == READ) {
|
|
align_buf[0] = cpu_to_le16(in_be32(mmio));
|
|
memcpy(trailing_buf, align_buf, 1);
|
|
} else {
|
|
memcpy(align_buf, trailing_buf, 1);
|
|
out_be32(mmio, le16_to_cpu(align_buf[0]));
|
|
}
|
|
words++;
|
|
}
|
|
|
|
return words << 1;
|
|
}
|
|
|
|
/**
|
|
* scc_irq_on - Enable interrupts on a port.
|
|
* @ap: Port on which interrupts are enabled.
|
|
*
|
|
* Note: Original code is ata_sff_irq_on().
|
|
*/
|
|
|
|
static u8 scc_irq_on (struct ata_port *ap)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
u8 tmp;
|
|
|
|
ap->ctl &= ~ATA_NIEN;
|
|
ap->last_ctl = ap->ctl;
|
|
|
|
out_be32(ioaddr->ctl_addr, ap->ctl);
|
|
tmp = ata_wait_idle(ap);
|
|
|
|
ap->ops->sff_irq_clear(ap);
|
|
|
|
return tmp;
|
|
}
|
|
|
|
/**
|
|
* scc_freeze - Freeze BMDMA controller port
|
|
* @ap: port to freeze
|
|
*
|
|
* Note: Original code is ata_sff_freeze().
|
|
*/
|
|
|
|
static void scc_freeze (struct ata_port *ap)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
ap->ctl |= ATA_NIEN;
|
|
ap->last_ctl = ap->ctl;
|
|
|
|
out_be32(ioaddr->ctl_addr, ap->ctl);
|
|
|
|
/* Under certain circumstances, some controllers raise IRQ on
|
|
* ATA_NIEN manipulation. Also, many controllers fail to mask
|
|
* previously pending IRQ on ATA_NIEN assertion. Clear it.
|
|
*/
|
|
ap->ops->sff_check_status(ap);
|
|
|
|
ap->ops->sff_irq_clear(ap);
|
|
}
|
|
|
|
/**
|
|
* scc_pata_prereset - prepare for reset
|
|
* @ap: ATA port to be reset
|
|
* @deadline: deadline jiffies for the operation
|
|
*/
|
|
|
|
static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
link->ap->cbl = ATA_CBL_PATA80;
|
|
return ata_sff_prereset(link, deadline);
|
|
}
|
|
|
|
/**
|
|
* scc_postreset - standard postreset callback
|
|
* @ap: the target ata_port
|
|
* @classes: classes of attached devices
|
|
*
|
|
* Note: Original code is ata_sff_postreset().
|
|
*/
|
|
|
|
static void scc_postreset(struct ata_link *link, unsigned int *classes)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
/* is double-select really necessary? */
|
|
if (classes[0] != ATA_DEV_NONE)
|
|
ap->ops->sff_dev_select(ap, 1);
|
|
if (classes[1] != ATA_DEV_NONE)
|
|
ap->ops->sff_dev_select(ap, 0);
|
|
|
|
/* bail out if no device is present */
|
|
if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
|
|
DPRINTK("EXIT, no device\n");
|
|
return;
|
|
}
|
|
|
|
/* set up device control */
|
|
if (ap->ioaddr.ctl_addr)
|
|
out_be32(ap->ioaddr.ctl_addr, ap->ctl);
|
|
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
/**
|
|
* scc_irq_clear - Clear PCI IDE BMDMA interrupt.
|
|
* @ap: Port associated with this ATA transaction.
|
|
*
|
|
* Note: Original code is ata_sff_irq_clear().
|
|
*/
|
|
|
|
static void scc_irq_clear (struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
if (!mmio)
|
|
return;
|
|
|
|
out_be32(mmio + SCC_DMA_STATUS, in_be32(mmio + SCC_DMA_STATUS));
|
|
}
|
|
|
|
/**
|
|
* scc_port_start - Set port up for dma.
|
|
* @ap: Port to initialize
|
|
*
|
|
* Allocate space for PRD table using ata_port_start().
|
|
* Set PRD table address for PTERADD. (PRD Transfer End Read)
|
|
*/
|
|
|
|
static int scc_port_start (struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
int rc;
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
out_be32(mmio + SCC_DMA_PTERADD, ap->prd_dma);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_port_stop - Undo scc_port_start()
|
|
* @ap: Port to shut down
|
|
*
|
|
* Reset PTERADD.
|
|
*/
|
|
|
|
static void scc_port_stop (struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.bmdma_addr;
|
|
|
|
out_be32(mmio + SCC_DMA_PTERADD, 0);
|
|
}
|
|
|
|
static struct scsi_host_template scc_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations scc_pata_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
|
|
.set_piomode = scc_set_piomode,
|
|
.set_dmamode = scc_set_dmamode,
|
|
.mode_filter = scc_mode_filter,
|
|
|
|
.sff_tf_load = scc_tf_load,
|
|
.sff_tf_read = scc_tf_read,
|
|
.sff_exec_command = scc_exec_command,
|
|
.sff_check_status = scc_check_status,
|
|
.sff_check_altstatus = scc_check_altstatus,
|
|
.sff_dev_select = scc_dev_select,
|
|
|
|
.bmdma_setup = scc_bmdma_setup,
|
|
.bmdma_start = scc_bmdma_start,
|
|
.bmdma_stop = scc_bmdma_stop,
|
|
.bmdma_status = scc_bmdma_status,
|
|
.sff_data_xfer = scc_data_xfer,
|
|
|
|
.freeze = scc_freeze,
|
|
.prereset = scc_pata_prereset,
|
|
.softreset = scc_softreset,
|
|
.postreset = scc_postreset,
|
|
.post_internal_cmd = scc_bmdma_stop,
|
|
|
|
.sff_irq_clear = scc_irq_clear,
|
|
.sff_irq_on = scc_irq_on,
|
|
|
|
.port_start = scc_port_start,
|
|
.port_stop = scc_port_stop,
|
|
};
|
|
|
|
static struct ata_port_info scc_port_info[] = {
|
|
{
|
|
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x00,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &scc_pata_ops,
|
|
},
|
|
};
|
|
|
|
/**
|
|
* scc_reset_controller - initialize SCC PATA controller.
|
|
*/
|
|
|
|
static int scc_reset_controller(struct ata_host *host)
|
|
{
|
|
void __iomem *ctrl_base = host->iomap[SCC_CTRL_BAR];
|
|
void __iomem *bmid_base = host->iomap[SCC_BMID_BAR];
|
|
void __iomem *cckctrl_port = ctrl_base + SCC_CTL_CCKCTRL;
|
|
void __iomem *mode_port = ctrl_base + SCC_CTL_MODEREG;
|
|
void __iomem *ecmode_port = ctrl_base + SCC_CTL_ECMODE;
|
|
void __iomem *intmask_port = bmid_base + SCC_DMA_INTMASK;
|
|
void __iomem *dmastatus_port = bmid_base + SCC_DMA_STATUS;
|
|
u32 reg = 0;
|
|
|
|
out_be32(cckctrl_port, reg);
|
|
reg |= CCKCTRL_ATACLKOEN;
|
|
out_be32(cckctrl_port, reg);
|
|
reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
|
|
out_be32(cckctrl_port, reg);
|
|
reg |= CCKCTRL_CRST;
|
|
out_be32(cckctrl_port, reg);
|
|
|
|
for (;;) {
|
|
reg = in_be32(cckctrl_port);
|
|
if (reg & CCKCTRL_CRST)
|
|
break;
|
|
udelay(5000);
|
|
}
|
|
|
|
reg |= CCKCTRL_ATARESET;
|
|
out_be32(cckctrl_port, reg);
|
|
out_be32(ecmode_port, ECMODE_VALUE);
|
|
out_be32(mode_port, MODE_JCUSFEN);
|
|
out_be32(intmask_port, INTMASK_MSK);
|
|
|
|
if (in_be32(dmastatus_port) & QCHSD_STPDIAG) {
|
|
printk(KERN_WARNING "%s: failed to detect 80c cable. (PDIAG# is high)\n", DRV_NAME);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_setup_ports - initialize ioaddr with SCC PATA port offsets.
|
|
* @ioaddr: IO address structure to be initialized
|
|
* @base: base address of BMID region
|
|
*/
|
|
|
|
static void scc_setup_ports (struct ata_ioports *ioaddr, void __iomem *base)
|
|
{
|
|
ioaddr->cmd_addr = base + SCC_REG_CMD_ADDR;
|
|
ioaddr->altstatus_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
|
|
ioaddr->ctl_addr = ioaddr->cmd_addr + SCC_REG_ALTSTATUS;
|
|
ioaddr->bmdma_addr = base;
|
|
ioaddr->data_addr = ioaddr->cmd_addr + SCC_REG_DATA;
|
|
ioaddr->error_addr = ioaddr->cmd_addr + SCC_REG_ERR;
|
|
ioaddr->feature_addr = ioaddr->cmd_addr + SCC_REG_FEATURE;
|
|
ioaddr->nsect_addr = ioaddr->cmd_addr + SCC_REG_NSECT;
|
|
ioaddr->lbal_addr = ioaddr->cmd_addr + SCC_REG_LBAL;
|
|
ioaddr->lbam_addr = ioaddr->cmd_addr + SCC_REG_LBAM;
|
|
ioaddr->lbah_addr = ioaddr->cmd_addr + SCC_REG_LBAH;
|
|
ioaddr->device_addr = ioaddr->cmd_addr + SCC_REG_DEVICE;
|
|
ioaddr->status_addr = ioaddr->cmd_addr + SCC_REG_STATUS;
|
|
ioaddr->command_addr = ioaddr->cmd_addr + SCC_REG_CMD;
|
|
}
|
|
|
|
static int scc_host_init(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
int rc;
|
|
|
|
rc = scc_reset_controller(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
scc_setup_ports(&host->ports[0]->ioaddr, host->iomap[SCC_BMID_BAR]);
|
|
|
|
pci_set_master(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* scc_init_one - Register SCC PATA device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in scc_pci_tbl matching with @pdev
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
const struct ata_port_info *ppi[] = { &scc_port_info[board_idx], NULL };
|
|
struct ata_host *host;
|
|
int rc;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"version " DRV_VERSION "\n");
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 1);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev, (1 << SCC_CTRL_BAR) | (1 << SCC_BMID_BAR), DRV_NAME);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl");
|
|
ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid");
|
|
|
|
rc = scc_host_init(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
|
|
IRQF_SHARED, &scc_sht);
|
|
}
|
|
|
|
static struct pci_driver scc_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = scc_pci_tbl,
|
|
.probe = scc_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init scc_init (void)
|
|
{
|
|
int rc;
|
|
|
|
DPRINTK("pci_register_driver\n");
|
|
rc = pci_register_driver(&scc_pci_driver);
|
|
if (rc)
|
|
return rc;
|
|
|
|
DPRINTK("done\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit scc_exit (void)
|
|
{
|
|
pci_unregister_driver(&scc_pci_driver);
|
|
}
|
|
|
|
module_init(scc_init);
|
|
module_exit(scc_exit);
|
|
|
|
MODULE_AUTHOR("Toshiba corp");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|