![Shobhit Kumar](/assets/img/avatar_default.png)
Fix warnings introduced by the following commit - commit 9c92da2c7c17eea79b6321b37592df0a002d24df Author: Shobhit Kumar <shobhit.kumar@intel.com> Date: Fri May 23 21:35:27 2014 +0530 drm/i915: Add support for Generic MIPI panel driver Fixed all except the DRM logging which go beyond line 80 Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
592 lines
18 KiB
C
592 lines
18 KiB
C
/*
|
|
* Copyright © 2014 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
* DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* Author: Shobhit Kumar <shobhit.kumar@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/i915_drm.h>
|
|
#include <linux/slab.h>
|
|
#include <video/mipi_display.h>
|
|
#include <asm/intel-mid.h>
|
|
#include <video/mipi_display.h>
|
|
#include "i915_drv.h"
|
|
#include "intel_drv.h"
|
|
#include "intel_dsi.h"
|
|
#include "intel_dsi_cmd.h"
|
|
|
|
#define MIPI_TRANSFER_MODE_SHIFT 0
|
|
#define MIPI_VIRTUAL_CHANNEL_SHIFT 1
|
|
#define MIPI_PORT_SHIFT 3
|
|
|
|
#define PREPARE_CNT_MAX 0x3F
|
|
#define EXIT_ZERO_CNT_MAX 0x3F
|
|
#define CLK_ZERO_CNT_MAX 0xFF
|
|
#define TRAIL_CNT_MAX 0x1F
|
|
|
|
#define NS_KHZ_RATIO 1000000
|
|
|
|
#define GPI0_NC_0_HV_DDI0_HPD 0x4130
|
|
#define GPIO_NC_0_HV_DDI0_PAD 0x4138
|
|
#define GPIO_NC_1_HV_DDI0_DDC_SDA 0x4120
|
|
#define GPIO_NC_1_HV_DDI0_DDC_SDA_PAD 0x4128
|
|
#define GPIO_NC_2_HV_DDI0_DDC_SCL 0x4110
|
|
#define GPIO_NC_2_HV_DDI0_DDC_SCL_PAD 0x4118
|
|
#define GPIO_NC_3_PANEL0_VDDEN 0x4140
|
|
#define GPIO_NC_3_PANEL0_VDDEN_PAD 0x4148
|
|
#define GPIO_NC_4_PANEL0_BLKEN 0x4150
|
|
#define GPIO_NC_4_PANEL0_BLKEN_PAD 0x4158
|
|
#define GPIO_NC_5_PANEL0_BLKCTL 0x4160
|
|
#define GPIO_NC_5_PANEL0_BLKCTL_PAD 0x4168
|
|
#define GPIO_NC_6_PCONF0 0x4180
|
|
#define GPIO_NC_6_PAD 0x4188
|
|
#define GPIO_NC_7_PCONF0 0x4190
|
|
#define GPIO_NC_7_PAD 0x4198
|
|
#define GPIO_NC_8_PCONF0 0x4170
|
|
#define GPIO_NC_8_PAD 0x4178
|
|
#define GPIO_NC_9_PCONF0 0x4100
|
|
#define GPIO_NC_9_PAD 0x4108
|
|
#define GPIO_NC_10_PCONF0 0x40E0
|
|
#define GPIO_NC_10_PAD 0x40E8
|
|
#define GPIO_NC_11_PCONF0 0x40F0
|
|
#define GPIO_NC_11_PAD 0x40F8
|
|
|
|
struct gpio_table {
|
|
u16 function_reg;
|
|
u16 pad_reg;
|
|
u8 init;
|
|
};
|
|
|
|
static struct gpio_table gtable[] = {
|
|
{ GPI0_NC_0_HV_DDI0_HPD, GPIO_NC_0_HV_DDI0_PAD, 0 },
|
|
{ GPIO_NC_1_HV_DDI0_DDC_SDA, GPIO_NC_1_HV_DDI0_DDC_SDA_PAD, 0 },
|
|
{ GPIO_NC_2_HV_DDI0_DDC_SCL, GPIO_NC_2_HV_DDI0_DDC_SCL_PAD, 0 },
|
|
{ GPIO_NC_3_PANEL0_VDDEN, GPIO_NC_3_PANEL0_VDDEN_PAD, 0 },
|
|
{ GPIO_NC_4_PANEL0_BLKEN, GPIO_NC_4_PANEL0_BLKEN_PAD, 0 },
|
|
{ GPIO_NC_5_PANEL0_BLKCTL, GPIO_NC_5_PANEL0_BLKCTL_PAD, 0 },
|
|
{ GPIO_NC_6_PCONF0, GPIO_NC_6_PAD, 0 },
|
|
{ GPIO_NC_7_PCONF0, GPIO_NC_7_PAD, 0 },
|
|
{ GPIO_NC_8_PCONF0, GPIO_NC_8_PAD, 0 },
|
|
{ GPIO_NC_9_PCONF0, GPIO_NC_9_PAD, 0 },
|
|
{ GPIO_NC_10_PCONF0, GPIO_NC_10_PAD, 0},
|
|
{ GPIO_NC_11_PCONF0, GPIO_NC_11_PAD, 0}
|
|
};
|
|
|
|
static u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, u8 *data)
|
|
{
|
|
u8 type, byte, mode, vc, port;
|
|
u16 len;
|
|
|
|
byte = *data++;
|
|
mode = (byte >> MIPI_TRANSFER_MODE_SHIFT) & 0x1;
|
|
vc = (byte >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 0x3;
|
|
port = (byte >> MIPI_PORT_SHIFT) & 0x3;
|
|
|
|
/* LP or HS mode */
|
|
intel_dsi->hs = mode;
|
|
|
|
/* get packet type and increment the pointer */
|
|
type = *data++;
|
|
|
|
len = *((u16 *) data);
|
|
data += 2;
|
|
|
|
switch (type) {
|
|
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
|
|
dsi_vc_generic_write_0(intel_dsi, vc);
|
|
break;
|
|
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
|
|
dsi_vc_generic_write_1(intel_dsi, vc, *data);
|
|
break;
|
|
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
|
|
dsi_vc_generic_write_2(intel_dsi, vc, *data, *(data + 1));
|
|
break;
|
|
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
|
|
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
|
|
case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
|
|
DRM_DEBUG_DRIVER("Generic Read not yet implemented or used\n");
|
|
break;
|
|
case MIPI_DSI_GENERIC_LONG_WRITE:
|
|
dsi_vc_generic_write(intel_dsi, vc, data, len);
|
|
break;
|
|
case MIPI_DSI_DCS_SHORT_WRITE:
|
|
dsi_vc_dcs_write_0(intel_dsi, vc, *data);
|
|
break;
|
|
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
|
|
dsi_vc_dcs_write_1(intel_dsi, vc, *data, *(data + 1));
|
|
break;
|
|
case MIPI_DSI_DCS_READ:
|
|
DRM_DEBUG_DRIVER("DCS Read not yet implemented or used\n");
|
|
break;
|
|
case MIPI_DSI_DCS_LONG_WRITE:
|
|
dsi_vc_dcs_write(intel_dsi, vc, data, len);
|
|
break;
|
|
}
|
|
|
|
data += len;
|
|
|
|
return data;
|
|
}
|
|
|
|
static u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, u8 *data)
|
|
{
|
|
u32 delay = *((u32 *) data);
|
|
|
|
usleep_range(delay, delay + 10);
|
|
data += 4;
|
|
|
|
return data;
|
|
}
|
|
|
|
static u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, u8 *data)
|
|
{
|
|
u8 gpio, action;
|
|
u16 function, pad;
|
|
u32 val;
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
gpio = *data++;
|
|
|
|
/* pull up/down */
|
|
action = *data++;
|
|
|
|
function = gtable[gpio].function_reg;
|
|
pad = gtable[gpio].pad_reg;
|
|
|
|
mutex_lock(&dev_priv->dpio_lock);
|
|
if (!gtable[gpio].init) {
|
|
/* program the function */
|
|
/* FIXME: remove constant below */
|
|
vlv_gpio_nc_write(dev_priv, function, 0x2000CC00);
|
|
gtable[gpio].init = 1;
|
|
}
|
|
|
|
val = 0x4 | action;
|
|
|
|
/* pull up/down */
|
|
vlv_gpio_nc_write(dev_priv, pad, val);
|
|
mutex_unlock(&dev_priv->dpio_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
typedef u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi, u8 *data);
|
|
static const fn_mipi_elem_exec exec_elem[] = {
|
|
NULL, /* reserved */
|
|
mipi_exec_send_packet,
|
|
mipi_exec_delay,
|
|
mipi_exec_gpio,
|
|
NULL, /* status read; later */
|
|
};
|
|
|
|
/*
|
|
* MIPI Sequence from VBT #53 parsing logic
|
|
* We have already separated each seqence during bios parsing
|
|
* Following is generic execution function for any sequence
|
|
*/
|
|
|
|
static const char * const seq_name[] = {
|
|
"UNDEFINED",
|
|
"MIPI_SEQ_ASSERT_RESET",
|
|
"MIPI_SEQ_INIT_OTP",
|
|
"MIPI_SEQ_DISPLAY_ON",
|
|
"MIPI_SEQ_DISPLAY_OFF",
|
|
"MIPI_SEQ_DEASSERT_RESET"
|
|
};
|
|
|
|
static void generic_exec_sequence(struct intel_dsi *intel_dsi, char *sequence)
|
|
{
|
|
u8 *data = sequence;
|
|
fn_mipi_elem_exec mipi_elem_exec;
|
|
int index;
|
|
|
|
if (!sequence)
|
|
return;
|
|
|
|
DRM_DEBUG_DRIVER("Starting MIPI sequence - %s\n", seq_name[*data]);
|
|
|
|
/* go to the first element of the sequence */
|
|
data++;
|
|
|
|
/* parse each byte till we reach end of sequence byte - 0x00 */
|
|
while (1) {
|
|
index = *data;
|
|
mipi_elem_exec = exec_elem[index];
|
|
if (!mipi_elem_exec) {
|
|
DRM_ERROR("Unsupported MIPI element, skipping sequence execution\n");
|
|
return;
|
|
}
|
|
|
|
/* goto element payload */
|
|
data++;
|
|
|
|
/* execute the element specific rotines */
|
|
data = mipi_elem_exec(intel_dsi, data);
|
|
|
|
/*
|
|
* After processing the element, data should point to
|
|
* next element or end of sequence
|
|
* check if have we reached end of sequence
|
|
*/
|
|
if (*data == 0x00)
|
|
break;
|
|
}
|
|
}
|
|
|
|
static bool generic_init(struct intel_dsi_device *dsi)
|
|
{
|
|
struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev);
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
|
|
struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
|
|
struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
|
|
u32 bits_per_pixel = 24;
|
|
u32 tlpx_ns, extra_byte_count, bitrate, tlpx_ui;
|
|
u32 ui_num, ui_den;
|
|
u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
|
|
u32 ths_prepare_ns, tclk_trail_ns;
|
|
u32 tclk_prepare_clkzero, ths_prepare_hszero;
|
|
u32 lp_to_hs_switch, hs_to_lp_switch;
|
|
|
|
DRM_DEBUG_KMS("\n");
|
|
|
|
intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
|
|
intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
|
|
intel_dsi->lane_count = mipi_config->lane_cnt + 1;
|
|
intel_dsi->pixel_format = mipi_config->videomode_color_format << 7;
|
|
|
|
if (intel_dsi->pixel_format == VID_MODE_FORMAT_RGB666)
|
|
bits_per_pixel = 18;
|
|
else if (intel_dsi->pixel_format == VID_MODE_FORMAT_RGB565)
|
|
bits_per_pixel = 16;
|
|
|
|
bitrate = (mode->clock * bits_per_pixel) / intel_dsi->lane_count;
|
|
|
|
intel_dsi->operation_mode = mipi_config->is_cmd_mode;
|
|
intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
|
|
intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
|
|
intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
|
|
intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
|
|
intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
|
|
intel_dsi->init_count = mipi_config->master_init_timer;
|
|
intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
|
|
intel_dsi->video_frmt_cfg_bits =
|
|
mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
|
|
|
|
switch (intel_dsi->escape_clk_div) {
|
|
case 0:
|
|
tlpx_ns = 50;
|
|
break;
|
|
case 1:
|
|
tlpx_ns = 100;
|
|
break;
|
|
|
|
case 2:
|
|
tlpx_ns = 200;
|
|
break;
|
|
default:
|
|
tlpx_ns = 50;
|
|
break;
|
|
}
|
|
|
|
switch (intel_dsi->lane_count) {
|
|
case 1:
|
|
case 2:
|
|
extra_byte_count = 2;
|
|
break;
|
|
case 3:
|
|
extra_byte_count = 4;
|
|
break;
|
|
case 4:
|
|
default:
|
|
extra_byte_count = 3;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* ui(s) = 1/f [f in hz]
|
|
* ui(ns) = 10^9 / (f*10^6) [f in Mhz] -> 10^3/f(Mhz)
|
|
*/
|
|
|
|
/* in Kbps */
|
|
ui_num = NS_KHZ_RATIO;
|
|
ui_den = bitrate;
|
|
|
|
tclk_prepare_clkzero = mipi_config->tclk_prepare_clkzero;
|
|
ths_prepare_hszero = mipi_config->ths_prepare_hszero;
|
|
|
|
/*
|
|
* B060
|
|
* LP byte clock = TLPX/ (8UI)
|
|
*/
|
|
intel_dsi->lp_byte_clk = DIV_ROUND_UP(tlpx_ns * ui_den, 8 * ui_num);
|
|
|
|
/* count values in UI = (ns value) * (bitrate / (2 * 10^6))
|
|
*
|
|
* Since txddrclkhs_i is 2xUI, all the count values programmed in
|
|
* DPHY param register are divided by 2
|
|
*
|
|
* prepare count
|
|
*/
|
|
ths_prepare_ns = max(mipi_config->ths_prepare,
|
|
mipi_config->tclk_prepare);
|
|
prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * 2);
|
|
|
|
/* exit zero count */
|
|
exit_zero_cnt = DIV_ROUND_UP(
|
|
(ths_prepare_hszero - ths_prepare_ns) * ui_den,
|
|
ui_num * 2
|
|
);
|
|
|
|
/*
|
|
* Exit zero is unified val ths_zero and ths_exit
|
|
* minimum value for ths_exit = 110ns
|
|
* min (exit_zero_cnt * 2) = 110/UI
|
|
* exit_zero_cnt = 55/UI
|
|
*/
|
|
if (exit_zero_cnt < (55 * ui_den / ui_num))
|
|
if ((55 * ui_den) % ui_num)
|
|
exit_zero_cnt += 1;
|
|
|
|
/* clk zero count */
|
|
clk_zero_cnt = DIV_ROUND_UP(
|
|
(tclk_prepare_clkzero - ths_prepare_ns)
|
|
* ui_den, 2 * ui_num);
|
|
|
|
/* trail count */
|
|
tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
|
|
trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, 2 * ui_num);
|
|
|
|
if (prepare_cnt > PREPARE_CNT_MAX ||
|
|
exit_zero_cnt > EXIT_ZERO_CNT_MAX ||
|
|
clk_zero_cnt > CLK_ZERO_CNT_MAX ||
|
|
trail_cnt > TRAIL_CNT_MAX)
|
|
DRM_DEBUG_DRIVER("Values crossing maximum limits, restricting to max values\n");
|
|
|
|
if (prepare_cnt > PREPARE_CNT_MAX)
|
|
prepare_cnt = PREPARE_CNT_MAX;
|
|
|
|
if (exit_zero_cnt > EXIT_ZERO_CNT_MAX)
|
|
exit_zero_cnt = EXIT_ZERO_CNT_MAX;
|
|
|
|
if (clk_zero_cnt > CLK_ZERO_CNT_MAX)
|
|
clk_zero_cnt = CLK_ZERO_CNT_MAX;
|
|
|
|
if (trail_cnt > TRAIL_CNT_MAX)
|
|
trail_cnt = TRAIL_CNT_MAX;
|
|
|
|
/* B080 */
|
|
intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |
|
|
clk_zero_cnt << 8 | prepare_cnt;
|
|
|
|
/*
|
|
* LP to HS switch count = 4TLPX + PREP_COUNT * 2 + EXIT_ZERO_COUNT * 2
|
|
* + 10UI + Extra Byte Count
|
|
*
|
|
* HS to LP switch count = THS-TRAIL + 2TLPX + Extra Byte Count
|
|
* Extra Byte Count is calculated according to number of lanes.
|
|
* High Low Switch Count is the Max of LP to HS and
|
|
* HS to LP switch count
|
|
*
|
|
*/
|
|
tlpx_ui = DIV_ROUND_UP(tlpx_ns * ui_den, ui_num);
|
|
|
|
/* B044 */
|
|
/* FIXME:
|
|
* The comment above does not match with the code */
|
|
lp_to_hs_switch = DIV_ROUND_UP(4 * tlpx_ui + prepare_cnt * 2 +
|
|
exit_zero_cnt * 2 + 10, 8);
|
|
|
|
hs_to_lp_switch = DIV_ROUND_UP(mipi_config->ths_trail + 2 * tlpx_ui, 8);
|
|
|
|
intel_dsi->hs_to_lp_count = max(lp_to_hs_switch, hs_to_lp_switch);
|
|
intel_dsi->hs_to_lp_count += extra_byte_count;
|
|
|
|
/* B088 */
|
|
/* LP -> HS for clock lanes
|
|
* LP clk sync + LP11 + LP01 + tclk_prepare + tclk_zero +
|
|
* extra byte count
|
|
* 2TPLX + 1TLPX + 1 TPLX(in ns) + prepare_cnt * 2 + clk_zero_cnt *
|
|
* 2(in UI) + extra byte count
|
|
* In byteclks = (4TLPX + prepare_cnt * 2 + clk_zero_cnt *2 (in UI)) /
|
|
* 8 + extra byte count
|
|
*/
|
|
intel_dsi->clk_lp_to_hs_count =
|
|
DIV_ROUND_UP(
|
|
4 * tlpx_ui + prepare_cnt * 2 +
|
|
clk_zero_cnt * 2,
|
|
8);
|
|
|
|
intel_dsi->clk_lp_to_hs_count += extra_byte_count;
|
|
|
|
/* HS->LP for Clock Lanes
|
|
* Low Power clock synchronisations + 1Tx byteclk + tclk_trail +
|
|
* Extra byte count
|
|
* 2TLPX + 8UI + (trail_count*2)(in UI) + Extra byte count
|
|
* In byteclks = (2*TLpx(in UI) + trail_count*2 +8)(in UI)/8 +
|
|
* Extra byte count
|
|
*/
|
|
intel_dsi->clk_hs_to_lp_count =
|
|
DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
|
|
8);
|
|
intel_dsi->clk_hs_to_lp_count += extra_byte_count;
|
|
|
|
DRM_DEBUG_KMS("Eot %s\n", intel_dsi->eotp_pkt ? "enabled" : "disabled");
|
|
DRM_DEBUG_KMS("Clockstop %s\n", intel_dsi->clock_stop ?
|
|
"disabled" : "enabled");
|
|
DRM_DEBUG_KMS("Mode %s\n", intel_dsi->operation_mode ? "command" : "video");
|
|
DRM_DEBUG_KMS("Pixel Format %d\n", intel_dsi->pixel_format);
|
|
DRM_DEBUG_KMS("TLPX %d\n", intel_dsi->escape_clk_div);
|
|
DRM_DEBUG_KMS("LP RX Timeout 0x%x\n", intel_dsi->lp_rx_timeout);
|
|
DRM_DEBUG_KMS("Turnaround Timeout 0x%x\n", intel_dsi->turn_arnd_val);
|
|
DRM_DEBUG_KMS("Init Count 0x%x\n", intel_dsi->init_count);
|
|
DRM_DEBUG_KMS("HS to LP Count 0x%x\n", intel_dsi->hs_to_lp_count);
|
|
DRM_DEBUG_KMS("LP Byte Clock %d\n", intel_dsi->lp_byte_clk);
|
|
DRM_DEBUG_KMS("DBI BW Timer 0x%x\n", intel_dsi->bw_timer);
|
|
DRM_DEBUG_KMS("LP to HS Clock Count 0x%x\n", intel_dsi->clk_lp_to_hs_count);
|
|
DRM_DEBUG_KMS("HS to LP Clock Count 0x%x\n", intel_dsi->clk_hs_to_lp_count);
|
|
DRM_DEBUG_KMS("BTA %s\n",
|
|
intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA ?
|
|
"disabled" : "enabled");
|
|
|
|
/* delays in VBT are in unit of 100us, so need to convert
|
|
* here in ms
|
|
* Delay (100us) * 100 /1000 = Delay / 10 (ms) */
|
|
intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10;
|
|
intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10;
|
|
intel_dsi->panel_on_delay = pps->panel_on_delay / 10;
|
|
intel_dsi->panel_off_delay = pps->panel_off_delay / 10;
|
|
intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int generic_mode_valid(struct intel_dsi_device *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
return MODE_OK;
|
|
}
|
|
|
|
static bool generic_mode_fixup(struct intel_dsi_device *dsi,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode) {
|
|
return true;
|
|
}
|
|
|
|
static void generic_panel_reset(struct intel_dsi_device *dsi)
|
|
{
|
|
struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev);
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_ASSERT_RESET];
|
|
|
|
generic_exec_sequence(intel_dsi, sequence);
|
|
}
|
|
|
|
static void generic_disable_panel_power(struct intel_dsi_device *dsi)
|
|
{
|
|
struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev);
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET];
|
|
|
|
generic_exec_sequence(intel_dsi, sequence);
|
|
}
|
|
|
|
static void generic_send_otp_cmds(struct intel_dsi_device *dsi)
|
|
{
|
|
struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev);
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_INIT_OTP];
|
|
|
|
generic_exec_sequence(intel_dsi, sequence);
|
|
}
|
|
|
|
static void generic_enable(struct intel_dsi_device *dsi)
|
|
{
|
|
struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev);
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_DISPLAY_ON];
|
|
|
|
generic_exec_sequence(intel_dsi, sequence);
|
|
}
|
|
|
|
static void generic_disable(struct intel_dsi_device *dsi)
|
|
{
|
|
struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev);
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
char *sequence = dev_priv->vbt.dsi.sequence[MIPI_SEQ_DISPLAY_OFF];
|
|
|
|
generic_exec_sequence(intel_dsi, sequence);
|
|
}
|
|
|
|
static enum drm_connector_status generic_detect(struct intel_dsi_device *dsi)
|
|
{
|
|
return connector_status_connected;
|
|
}
|
|
|
|
static bool generic_get_hw_state(struct intel_dsi_device *dev)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
static struct drm_display_mode *generic_get_modes(struct intel_dsi_device *dsi)
|
|
{
|
|
struct intel_dsi *intel_dsi = container_of(dsi, struct intel_dsi, dev);
|
|
struct drm_device *dev = intel_dsi->base.base.dev;
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
dev_priv->vbt.lfp_lvds_vbt_mode->type |= DRM_MODE_TYPE_PREFERRED;
|
|
return dev_priv->vbt.lfp_lvds_vbt_mode;
|
|
}
|
|
|
|
static void generic_destroy(struct intel_dsi_device *dsi) { }
|
|
|
|
/* Callbacks. We might not need them all. */
|
|
struct intel_dsi_dev_ops vbt_generic_dsi_display_ops = {
|
|
.init = generic_init,
|
|
.mode_valid = generic_mode_valid,
|
|
.mode_fixup = generic_mode_fixup,
|
|
.panel_reset = generic_panel_reset,
|
|
.disable_panel_power = generic_disable_panel_power,
|
|
.send_otp_cmds = generic_send_otp_cmds,
|
|
.enable = generic_enable,
|
|
.disable = generic_disable,
|
|
.detect = generic_detect,
|
|
.get_hw_state = generic_get_hw_state,
|
|
.get_modes = generic_get_modes,
|
|
.destroy = generic_destroy,
|
|
};
|