redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/net/ax25/ax25_std_in.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h 
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

448 lines
11 KiB
C
Raw Blame History

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Copyright (C) Alan Cox GW4PTS (alan@lxorguk.ukuu.org.uk)
* Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
* Copyright (C) Joerg Reuter DL1BKE (jreuter@yaina.de)
* Copyright (C) Hans-Joachim Hetscher DD8NE (dd8ne@bnv-bamberg.de)
*
* Most of this code is based on the SDL diagrams published in the 7th ARRL
* Computer Networking Conference papers. The diagrams have mistakes in them,
* but are mostly correct. Before you modify the code could you read the SDL
* diagrams as the code is not obvious and probably very easy to break.
*/
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <net/tcp_states.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
/*
* State machine for state 1, Awaiting Connection State.
* The handling of the timer(s) is in file ax25_std_timer.c.
* Handling of state 0 and connection release is in ax25.c.
*/
static int ax25_std_state1_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int pf, int type)
{
switch (frametype) {
case AX25_SABM:
ax25->modulus = AX25_MODULUS;
ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
break;
case AX25_SABME:
ax25->modulus = AX25_EMODULUS;
ax25->window = ax25->ax25_dev->values[AX25_VALUES_EWINDOW];
ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
break;
case AX25_DISC:
ax25_send_control(ax25, AX25_DM, pf, AX25_RESPONSE);
break;
case AX25_UA:
if (pf) {
ax25_calculate_rtt(ax25);
ax25_stop_t1timer(ax25);
ax25_start_t3timer(ax25);
ax25_start_idletimer(ax25);
ax25->vs = 0;
ax25->va = 0;
ax25->vr = 0;
ax25->state = AX25_STATE_3;
ax25->n2count = 0;
if (ax25->sk != NULL) {
bh_lock_sock(ax25->sk);
ax25->sk->sk_state = TCP_ESTABLISHED;
/* For WAIT_SABM connections we will produce an accept ready socket here */
if (!sock_flag(ax25->sk, SOCK_DEAD))
ax25->sk->sk_state_change(ax25->sk);
bh_unlock_sock(ax25->sk);
}
}
break;
case AX25_DM:
if (pf) {
if (ax25->modulus == AX25_MODULUS) {
ax25_disconnect(ax25, ECONNREFUSED);
} else {
ax25->modulus = AX25_MODULUS;
ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
}
}
break;
default:
break;
}
return 0;
}
/*
* State machine for state 2, Awaiting Release State.
* The handling of the timer(s) is in file ax25_std_timer.c
* Handling of state 0 and connection release is in ax25.c.
*/
static int ax25_std_state2_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int pf, int type)
{
switch (frametype) {
case AX25_SABM:
case AX25_SABME:
ax25_send_control(ax25, AX25_DM, pf, AX25_RESPONSE);
break;
case AX25_DISC:
ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
ax25_disconnect(ax25, 0);
break;
case AX25_DM:
case AX25_UA:
if (pf)
ax25_disconnect(ax25, 0);
break;
case AX25_I:
case AX25_REJ:
case AX25_RNR:
case AX25_RR:
if (pf) ax25_send_control(ax25, AX25_DM, AX25_POLLON, AX25_RESPONSE);
break;
default:
break;
}
return 0;
}
/*
* State machine for state 3, Connected State.
* The handling of the timer(s) is in file ax25_std_timer.c
* Handling of state 0 and connection release is in ax25.c.
*/
static int ax25_std_state3_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int ns, int nr, int pf, int type)
{
int queued = 0;
switch (frametype) {
case AX25_SABM:
case AX25_SABME:
if (frametype == AX25_SABM) {
ax25->modulus = AX25_MODULUS;
ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
} else {
ax25->modulus = AX25_EMODULUS;
ax25->window = ax25->ax25_dev->values[AX25_VALUES_EWINDOW];
}
ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
ax25_stop_t1timer(ax25);
ax25_stop_t2timer(ax25);
ax25_start_t3timer(ax25);
ax25_start_idletimer(ax25);
ax25->condition = 0x00;
ax25->vs = 0;
ax25->va = 0;
ax25->vr = 0;
ax25_requeue_frames(ax25);
break;
case AX25_DISC:
ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
ax25_disconnect(ax25, 0);
break;
case AX25_DM:
ax25_disconnect(ax25, ECONNRESET);
break;
case AX25_RR:
case AX25_RNR:
if (frametype == AX25_RR)
ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
else
ax25->condition |= AX25_COND_PEER_RX_BUSY;
if (type == AX25_COMMAND && pf)
ax25_std_enquiry_response(ax25);
if (ax25_validate_nr(ax25, nr)) {
ax25_check_iframes_acked(ax25, nr);
} else {
ax25_std_nr_error_recovery(ax25);
ax25->state = AX25_STATE_1;
}
break;
case AX25_REJ:
ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
if (type == AX25_COMMAND && pf)
ax25_std_enquiry_response(ax25);
if (ax25_validate_nr(ax25, nr)) {
ax25_frames_acked(ax25, nr);
ax25_calculate_rtt(ax25);
ax25_stop_t1timer(ax25);
ax25_start_t3timer(ax25);
ax25_requeue_frames(ax25);
} else {
ax25_std_nr_error_recovery(ax25);
ax25->state = AX25_STATE_1;
}
break;
case AX25_I:
if (!ax25_validate_nr(ax25, nr)) {
ax25_std_nr_error_recovery(ax25);
ax25->state = AX25_STATE_1;
break;
}
if (ax25->condition & AX25_COND_PEER_RX_BUSY) {
ax25_frames_acked(ax25, nr);
} else {
ax25_check_iframes_acked(ax25, nr);
}
if (ax25->condition & AX25_COND_OWN_RX_BUSY) {
if (pf) ax25_std_enquiry_response(ax25);
break;
}
if (ns == ax25->vr) {
ax25->vr = (ax25->vr + 1) % ax25->modulus;
queued = ax25_rx_iframe(ax25, skb);
if (ax25->condition & AX25_COND_OWN_RX_BUSY)
ax25->vr = ns; /* ax25->vr - 1 */
ax25->condition &= ~AX25_COND_REJECT;
if (pf) {
ax25_std_enquiry_response(ax25);
} else {
if (!(ax25->condition & AX25_COND_ACK_PENDING)) {
ax25->condition |= AX25_COND_ACK_PENDING;
ax25_start_t2timer(ax25);
}
}
} else {
if (ax25->condition & AX25_COND_REJECT) {
if (pf) ax25_std_enquiry_response(ax25);
} else {
ax25->condition |= AX25_COND_REJECT;
ax25_send_control(ax25, AX25_REJ, pf, AX25_RESPONSE);
ax25->condition &= ~AX25_COND_ACK_PENDING;
}
}
break;
case AX25_FRMR:
case AX25_ILLEGAL:
ax25_std_establish_data_link(ax25);
ax25->state = AX25_STATE_1;
break;
default:
break;
}
return queued;
}
/*
* State machine for state 4, Timer Recovery State.
* The handling of the timer(s) is in file ax25_std_timer.c
* Handling of state 0 and connection release is in ax25.c.
*/
static int ax25_std_state4_machine(ax25_cb *ax25, struct sk_buff *skb, int frametype, int ns, int nr, int pf, int type)
{
int queued = 0;
switch (frametype) {
case AX25_SABM:
case AX25_SABME:
if (frametype == AX25_SABM) {
ax25->modulus = AX25_MODULUS;
ax25->window = ax25->ax25_dev->values[AX25_VALUES_WINDOW];
} else {
ax25->modulus = AX25_EMODULUS;
ax25->window = ax25->ax25_dev->values[AX25_VALUES_EWINDOW];
}
ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
ax25_stop_t1timer(ax25);
ax25_stop_t2timer(ax25);
ax25_start_t3timer(ax25);
ax25_start_idletimer(ax25);
ax25->condition = 0x00;
ax25->vs = 0;
ax25->va = 0;
ax25->vr = 0;
ax25->state = AX25_STATE_3;
ax25->n2count = 0;
ax25_requeue_frames(ax25);
break;
case AX25_DISC:
ax25_send_control(ax25, AX25_UA, pf, AX25_RESPONSE);
ax25_disconnect(ax25, 0);
break;
case AX25_DM:
ax25_disconnect(ax25, ECONNRESET);
break;
case AX25_RR:
case AX25_RNR:
if (frametype == AX25_RR)
ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
else
ax25->condition |= AX25_COND_PEER_RX_BUSY;
if (type == AX25_RESPONSE && pf) {
ax25_stop_t1timer(ax25);
ax25->n2count = 0;
if (ax25_validate_nr(ax25, nr)) {
ax25_frames_acked(ax25, nr);
if (ax25->vs == ax25->va) {
ax25_start_t3timer(ax25);
ax25->state = AX25_STATE_3;
} else {
ax25_requeue_frames(ax25);
}
} else {
ax25_std_nr_error_recovery(ax25);
ax25->state = AX25_STATE_1;
}
break;
}
if (type == AX25_COMMAND && pf)
ax25_std_enquiry_response(ax25);
if (ax25_validate_nr(ax25, nr)) {
ax25_frames_acked(ax25, nr);
} else {
ax25_std_nr_error_recovery(ax25);
ax25->state = AX25_STATE_1;
}
break;
case AX25_REJ:
ax25->condition &= ~AX25_COND_PEER_RX_BUSY;
if (pf && type == AX25_RESPONSE) {
ax25_stop_t1timer(ax25);
ax25->n2count = 0;
if (ax25_validate_nr(ax25, nr)) {
ax25_frames_acked(ax25, nr);
if (ax25->vs == ax25->va) {
ax25_start_t3timer(ax25);
ax25->state = AX25_STATE_3;
} else {
ax25_requeue_frames(ax25);
}
} else {
ax25_std_nr_error_recovery(ax25);
ax25->state = AX25_STATE_1;
}
break;
}
if (type == AX25_COMMAND && pf)
ax25_std_enquiry_response(ax25);
if (ax25_validate_nr(ax25, nr)) {
ax25_frames_acked(ax25, nr);
ax25_requeue_frames(ax25);
} else {
ax25_std_nr_error_recovery(ax25);
ax25->state = AX25_STATE_1;
}
break;
case AX25_I:
if (!ax25_validate_nr(ax25, nr)) {
ax25_std_nr_error_recovery(ax25);
ax25->state = AX25_STATE_1;
break;
}
ax25_frames_acked(ax25, nr);
if (ax25->condition & AX25_COND_OWN_RX_BUSY) {
if (pf)
ax25_std_enquiry_response(ax25);
break;
}
if (ns == ax25->vr) {
ax25->vr = (ax25->vr + 1) % ax25->modulus;
queued = ax25_rx_iframe(ax25, skb);
if (ax25->condition & AX25_COND_OWN_RX_BUSY)
ax25->vr = ns; /* ax25->vr - 1 */
ax25->condition &= ~AX25_COND_REJECT;
if (pf) {
ax25_std_enquiry_response(ax25);
} else {
if (!(ax25->condition & AX25_COND_ACK_PENDING)) {
ax25->condition |= AX25_COND_ACK_PENDING;
ax25_start_t2timer(ax25);
}
}
} else {
if (ax25->condition & AX25_COND_REJECT) {
if (pf) ax25_std_enquiry_response(ax25);
} else {
ax25->condition |= AX25_COND_REJECT;
ax25_send_control(ax25, AX25_REJ, pf, AX25_RESPONSE);
ax25->condition &= ~AX25_COND_ACK_PENDING;
}
}
break;
case AX25_FRMR:
case AX25_ILLEGAL:
ax25_std_establish_data_link(ax25);
ax25->state = AX25_STATE_1;
break;
default:
break;
}
return queued;
}
/*
* Higher level upcall for a LAPB frame
*/
int ax25_std_frame_in(ax25_cb *ax25, struct sk_buff *skb, int type)
{
int queued = 0, frametype, ns, nr, pf;
frametype = ax25_decode(ax25, skb, &ns, &nr, &pf);
switch (ax25->state) {
case AX25_STATE_1:
queued = ax25_std_state1_machine(ax25, skb, frametype, pf, type);
break;
case AX25_STATE_2:
queued = ax25_std_state2_machine(ax25, skb, frametype, pf, type);
break;
case AX25_STATE_3:
queued = ax25_std_state3_machine(ax25, skb, frametype, ns, nr, pf, type);
break;
case AX25_STATE_4:
queued = ax25_std_state4_machine(ax25, skb, frametype, ns, nr, pf, type);
break;
}
ax25_kick(ax25);
return queued;
}
View git blame Copy permalink