![David Brownell](/assets/img/avatar_default.png)
This fixes some build errors ... unclear how this got past earlier tests. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
3086 lines
78 KiB
C
3086 lines
78 KiB
C
/*
|
|
* omap_udc.c -- for OMAP full speed udc; most chips support OTG.
|
|
*
|
|
* Copyright (C) 2004 Texas Instruments, Inc.
|
|
* Copyright (C) 2004-2005 David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#undef DEBUG
|
|
#undef VERBOSE
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
#include <asm/unaligned.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/arch/dma.h>
|
|
#include <asm/arch/usb.h>
|
|
|
|
#include "omap_udc.h"
|
|
|
|
#undef USB_TRACE
|
|
|
|
/* bulk DMA seems to be behaving for both IN and OUT */
|
|
#define USE_DMA
|
|
|
|
/* FIXME: OMAP2 currently has some problem in DMA mode */
|
|
#ifdef CONFIG_ARCH_OMAP2
|
|
#undef USE_DMA
|
|
#endif
|
|
|
|
/* ISO too */
|
|
#define USE_ISO
|
|
|
|
#define DRIVER_DESC "OMAP UDC driver"
|
|
#define DRIVER_VERSION "4 October 2004"
|
|
|
|
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
|
|
|
|
|
|
/*
|
|
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
|
|
* D+ pullup to allow enumeration. That's too early for the gadget
|
|
* framework to use from usb_endpoint_enable(), which happens after
|
|
* enumeration as part of activating an interface. (But if we add an
|
|
* optional new "UDC not yet running" state to the gadget driver model,
|
|
* even just during driver binding, the endpoint autoconfig logic is the
|
|
* natural spot to manufacture new endpoints.)
|
|
*
|
|
* So instead of using endpoint enable calls to control the hardware setup,
|
|
* this driver defines a "fifo mode" parameter. It's used during driver
|
|
* initialization to choose among a set of pre-defined endpoint configs.
|
|
* See omap_udc_setup() for available modes, or to add others. That code
|
|
* lives in an init section, so use this driver as a module if you need
|
|
* to change the fifo mode after the kernel boots.
|
|
*
|
|
* Gadget drivers normally ignore endpoints they don't care about, and
|
|
* won't include them in configuration descriptors. That means only
|
|
* misbehaving hosts would even notice they exist.
|
|
*/
|
|
#ifdef USE_ISO
|
|
static unsigned fifo_mode = 3;
|
|
#else
|
|
static unsigned fifo_mode = 0;
|
|
#endif
|
|
|
|
/* "modprobe omap_udc fifo_mode=42", or else as a kernel
|
|
* boot parameter "omap_udc:fifo_mode=42"
|
|
*/
|
|
module_param (fifo_mode, uint, 0);
|
|
MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
|
|
|
|
#ifdef USE_DMA
|
|
static unsigned use_dma = 1;
|
|
|
|
/* "modprobe omap_udc use_dma=y", or else as a kernel
|
|
* boot parameter "omap_udc:use_dma=y"
|
|
*/
|
|
module_param (use_dma, bool, 0);
|
|
MODULE_PARM_DESC (use_dma, "enable/disable DMA");
|
|
#else /* !USE_DMA */
|
|
|
|
/* save a bit of code */
|
|
#define use_dma 0
|
|
#endif /* !USE_DMA */
|
|
|
|
|
|
static const char driver_name [] = "omap_udc";
|
|
static const char driver_desc [] = DRIVER_DESC;
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* there's a notion of "current endpoint" for modifying endpoint
|
|
* state, and PIO access to its FIFO.
|
|
*/
|
|
|
|
static void use_ep(struct omap_ep *ep, u16 select)
|
|
{
|
|
u16 num = ep->bEndpointAddress & 0x0f;
|
|
|
|
if (ep->bEndpointAddress & USB_DIR_IN)
|
|
num |= UDC_EP_DIR;
|
|
UDC_EP_NUM_REG = num | select;
|
|
/* when select, MUST deselect later !! */
|
|
}
|
|
|
|
static inline void deselect_ep(void)
|
|
{
|
|
UDC_EP_NUM_REG &= ~UDC_EP_SEL;
|
|
/* 6 wait states before TX will happen */
|
|
}
|
|
|
|
static void dma_channel_claim(struct omap_ep *ep, unsigned preferred);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int omap_ep_enable(struct usb_ep *_ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
|
|
struct omap_udc *udc;
|
|
unsigned long flags;
|
|
u16 maxp;
|
|
|
|
/* catch various bogus parameters */
|
|
if (!_ep || !desc || ep->desc
|
|
|| desc->bDescriptorType != USB_DT_ENDPOINT
|
|
|| ep->bEndpointAddress != desc->bEndpointAddress
|
|
|| ep->maxpacket < le16_to_cpu
|
|
(desc->wMaxPacketSize)) {
|
|
DBG("%s, bad ep or descriptor\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
maxp = le16_to_cpu (desc->wMaxPacketSize);
|
|
if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
|
|
&& maxp != ep->maxpacket)
|
|
|| le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket
|
|
|| !desc->wMaxPacketSize) {
|
|
DBG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
|
|
return -ERANGE;
|
|
}
|
|
|
|
#ifdef USE_ISO
|
|
if ((desc->bmAttributes == USB_ENDPOINT_XFER_ISOC
|
|
&& desc->bInterval != 1)) {
|
|
/* hardware wants period = 1; USB allows 2^(Interval-1) */
|
|
DBG("%s, unsupported ISO period %dms\n", _ep->name,
|
|
1 << (desc->bInterval - 1));
|
|
return -EDOM;
|
|
}
|
|
#else
|
|
if (desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
|
DBG("%s, ISO nyet\n", _ep->name);
|
|
return -EDOM;
|
|
}
|
|
#endif
|
|
|
|
/* xfer types must match, except that interrupt ~= bulk */
|
|
if (ep->bmAttributes != desc->bmAttributes
|
|
&& ep->bmAttributes != USB_ENDPOINT_XFER_BULK
|
|
&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
|
|
DBG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
udc = ep->udc;
|
|
if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
|
|
DBG("%s, bogus device state\n", __FUNCTION__);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
|
|
ep->desc = desc;
|
|
ep->irqs = 0;
|
|
ep->stopped = 0;
|
|
ep->ep.maxpacket = maxp;
|
|
|
|
/* set endpoint to initial state */
|
|
ep->dma_channel = 0;
|
|
ep->has_dma = 0;
|
|
ep->lch = -1;
|
|
use_ep(ep, UDC_EP_SEL);
|
|
UDC_CTRL_REG = udc->clr_halt;
|
|
ep->ackwait = 0;
|
|
deselect_ep();
|
|
|
|
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
|
|
list_add(&ep->iso, &udc->iso);
|
|
|
|
/* maybe assign a DMA channel to this endpoint */
|
|
if (use_dma && desc->bmAttributes == USB_ENDPOINT_XFER_BULK)
|
|
/* FIXME ISO can dma, but prefers first channel */
|
|
dma_channel_claim(ep, 0);
|
|
|
|
/* PIO OUT may RX packets */
|
|
if (desc->bmAttributes != USB_ENDPOINT_XFER_ISOC
|
|
&& !ep->has_dma
|
|
&& !(ep->bEndpointAddress & USB_DIR_IN)) {
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
ep->ackwait = 1 + ep->double_buf;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
VDBG("%s enabled\n", _ep->name);
|
|
return 0;
|
|
}
|
|
|
|
static void nuke(struct omap_ep *, int status);
|
|
|
|
static int omap_ep_disable(struct usb_ep *_ep)
|
|
{
|
|
struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
|
|
unsigned long flags;
|
|
|
|
if (!_ep || !ep->desc) {
|
|
DBG("%s, %s not enabled\n", __FUNCTION__,
|
|
_ep ? ep->ep.name : NULL);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&ep->udc->lock, flags);
|
|
ep->desc = NULL;
|
|
nuke (ep, -ESHUTDOWN);
|
|
ep->ep.maxpacket = ep->maxpacket;
|
|
ep->has_dma = 0;
|
|
UDC_CTRL_REG = UDC_SET_HALT;
|
|
list_del_init(&ep->iso);
|
|
del_timer(&ep->timer);
|
|
|
|
spin_unlock_irqrestore(&ep->udc->lock, flags);
|
|
|
|
VDBG("%s disabled\n", _ep->name);
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct usb_request *
|
|
omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
|
|
{
|
|
struct omap_req *req;
|
|
|
|
req = kzalloc(sizeof(*req), gfp_flags);
|
|
if (req) {
|
|
req->req.dma = DMA_ADDR_INVALID;
|
|
INIT_LIST_HEAD (&req->queue);
|
|
}
|
|
return &req->req;
|
|
}
|
|
|
|
static void
|
|
omap_free_request(struct usb_ep *ep, struct usb_request *_req)
|
|
{
|
|
struct omap_req *req = container_of(_req, struct omap_req, req);
|
|
|
|
if (_req)
|
|
kfree (req);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void
|
|
done(struct omap_ep *ep, struct omap_req *req, int status)
|
|
{
|
|
unsigned stopped = ep->stopped;
|
|
|
|
list_del_init(&req->queue);
|
|
|
|
if (req->req.status == -EINPROGRESS)
|
|
req->req.status = status;
|
|
else
|
|
status = req->req.status;
|
|
|
|
if (use_dma && ep->has_dma) {
|
|
if (req->mapped) {
|
|
dma_unmap_single(ep->udc->gadget.dev.parent,
|
|
req->req.dma, req->req.length,
|
|
(ep->bEndpointAddress & USB_DIR_IN)
|
|
? DMA_TO_DEVICE
|
|
: DMA_FROM_DEVICE);
|
|
req->req.dma = DMA_ADDR_INVALID;
|
|
req->mapped = 0;
|
|
} else
|
|
dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
|
|
req->req.dma, req->req.length,
|
|
(ep->bEndpointAddress & USB_DIR_IN)
|
|
? DMA_TO_DEVICE
|
|
: DMA_FROM_DEVICE);
|
|
}
|
|
|
|
#ifndef USB_TRACE
|
|
if (status && status != -ESHUTDOWN)
|
|
#endif
|
|
VDBG("complete %s req %p stat %d len %u/%u\n",
|
|
ep->ep.name, &req->req, status,
|
|
req->req.actual, req->req.length);
|
|
|
|
/* don't modify queue heads during completion callback */
|
|
ep->stopped = 1;
|
|
spin_unlock(&ep->udc->lock);
|
|
req->req.complete(&ep->ep, &req->req);
|
|
spin_lock(&ep->udc->lock);
|
|
ep->stopped = stopped;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#define UDC_FIFO_FULL (UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL)
|
|
#define UDC_FIFO_UNWRITABLE (UDC_EP_HALTED | UDC_FIFO_FULL)
|
|
|
|
#define FIFO_EMPTY (UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY)
|
|
#define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY)
|
|
|
|
static inline int
|
|
write_packet(u8 *buf, struct omap_req *req, unsigned max)
|
|
{
|
|
unsigned len;
|
|
u16 *wp;
|
|
|
|
len = min(req->req.length - req->req.actual, max);
|
|
req->req.actual += len;
|
|
|
|
max = len;
|
|
if (likely((((int)buf) & 1) == 0)) {
|
|
wp = (u16 *)buf;
|
|
while (max >= 2) {
|
|
UDC_DATA_REG = *wp++;
|
|
max -= 2;
|
|
}
|
|
buf = (u8 *)wp;
|
|
}
|
|
while (max--)
|
|
*(volatile u8 *)&UDC_DATA_REG = *buf++;
|
|
return len;
|
|
}
|
|
|
|
// FIXME change r/w fifo calling convention
|
|
|
|
|
|
// return: 0 = still running, 1 = completed, negative = errno
|
|
static int write_fifo(struct omap_ep *ep, struct omap_req *req)
|
|
{
|
|
u8 *buf;
|
|
unsigned count;
|
|
int is_last;
|
|
u16 ep_stat;
|
|
|
|
buf = req->req.buf + req->req.actual;
|
|
prefetch(buf);
|
|
|
|
/* PIO-IN isn't double buffered except for iso */
|
|
ep_stat = UDC_STAT_FLG_REG;
|
|
if (ep_stat & UDC_FIFO_UNWRITABLE)
|
|
return 0;
|
|
|
|
count = ep->ep.maxpacket;
|
|
count = write_packet(buf, req, count);
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
ep->ackwait = 1;
|
|
|
|
/* last packet is often short (sometimes a zlp) */
|
|
if (count != ep->ep.maxpacket)
|
|
is_last = 1;
|
|
else if (req->req.length == req->req.actual
|
|
&& !req->req.zero)
|
|
is_last = 1;
|
|
else
|
|
is_last = 0;
|
|
|
|
/* NOTE: requests complete when all IN data is in a
|
|
* FIFO (or sometimes later, if a zlp was needed).
|
|
* Use usb_ep_fifo_status() where needed.
|
|
*/
|
|
if (is_last)
|
|
done(ep, req, 0);
|
|
return is_last;
|
|
}
|
|
|
|
static inline int
|
|
read_packet(u8 *buf, struct omap_req *req, unsigned avail)
|
|
{
|
|
unsigned len;
|
|
u16 *wp;
|
|
|
|
len = min(req->req.length - req->req.actual, avail);
|
|
req->req.actual += len;
|
|
avail = len;
|
|
|
|
if (likely((((int)buf) & 1) == 0)) {
|
|
wp = (u16 *)buf;
|
|
while (avail >= 2) {
|
|
*wp++ = UDC_DATA_REG;
|
|
avail -= 2;
|
|
}
|
|
buf = (u8 *)wp;
|
|
}
|
|
while (avail--)
|
|
*buf++ = *(volatile u8 *)&UDC_DATA_REG;
|
|
return len;
|
|
}
|
|
|
|
// return: 0 = still running, 1 = queue empty, negative = errno
|
|
static int read_fifo(struct omap_ep *ep, struct omap_req *req)
|
|
{
|
|
u8 *buf;
|
|
unsigned count, avail;
|
|
int is_last;
|
|
|
|
buf = req->req.buf + req->req.actual;
|
|
prefetchw(buf);
|
|
|
|
for (;;) {
|
|
u16 ep_stat = UDC_STAT_FLG_REG;
|
|
|
|
is_last = 0;
|
|
if (ep_stat & FIFO_EMPTY) {
|
|
if (!ep->double_buf)
|
|
break;
|
|
ep->fnf = 1;
|
|
}
|
|
if (ep_stat & UDC_EP_HALTED)
|
|
break;
|
|
|
|
if (ep_stat & UDC_FIFO_FULL)
|
|
avail = ep->ep.maxpacket;
|
|
else {
|
|
avail = UDC_RXFSTAT_REG;
|
|
ep->fnf = ep->double_buf;
|
|
}
|
|
count = read_packet(buf, req, avail);
|
|
|
|
/* partial packet reads may not be errors */
|
|
if (count < ep->ep.maxpacket) {
|
|
is_last = 1;
|
|
/* overflowed this request? flush extra data */
|
|
if (count != avail) {
|
|
req->req.status = -EOVERFLOW;
|
|
avail -= count;
|
|
while (avail--)
|
|
(void) *(volatile u8 *)&UDC_DATA_REG;
|
|
}
|
|
} else if (req->req.length == req->req.actual)
|
|
is_last = 1;
|
|
else
|
|
is_last = 0;
|
|
|
|
if (!ep->bEndpointAddress)
|
|
break;
|
|
if (is_last)
|
|
done(ep, req, 0);
|
|
break;
|
|
}
|
|
return is_last;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline dma_addr_t dma_csac(unsigned lch)
|
|
{
|
|
dma_addr_t csac;
|
|
|
|
/* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
|
|
* read before the DMA controller finished disabling the channel.
|
|
*/
|
|
csac = OMAP_DMA_CSAC_REG(lch);
|
|
if (csac == 0)
|
|
csac = OMAP_DMA_CSAC_REG(lch);
|
|
return csac;
|
|
}
|
|
|
|
static inline dma_addr_t dma_cdac(unsigned lch)
|
|
{
|
|
dma_addr_t cdac;
|
|
|
|
/* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
|
|
* read before the DMA controller finished disabling the channel.
|
|
*/
|
|
cdac = OMAP_DMA_CDAC_REG(lch);
|
|
if (cdac == 0)
|
|
cdac = OMAP_DMA_CDAC_REG(lch);
|
|
return cdac;
|
|
}
|
|
|
|
static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
|
|
{
|
|
dma_addr_t end;
|
|
|
|
/* IN-DMA needs this on fault/cancel paths, so 15xx misreports
|
|
* the last transfer's bytecount by more than a FIFO's worth.
|
|
*/
|
|
if (cpu_is_omap15xx())
|
|
return 0;
|
|
|
|
end = dma_csac(ep->lch);
|
|
if (end == ep->dma_counter)
|
|
return 0;
|
|
|
|
end |= start & (0xffff << 16);
|
|
if (end < start)
|
|
end += 0x10000;
|
|
return end - start;
|
|
}
|
|
|
|
#define DMA_DEST_LAST(x) (cpu_is_omap15xx() \
|
|
? OMAP_DMA_CSAC_REG(x) /* really: CPC */ \
|
|
: dma_cdac(x))
|
|
|
|
static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
|
|
{
|
|
dma_addr_t end;
|
|
|
|
end = DMA_DEST_LAST(ep->lch);
|
|
if (end == ep->dma_counter)
|
|
return 0;
|
|
|
|
end |= start & (0xffff << 16);
|
|
if (cpu_is_omap15xx())
|
|
end++;
|
|
if (end < start)
|
|
end += 0x10000;
|
|
return end - start;
|
|
}
|
|
|
|
|
|
/* Each USB transfer request using DMA maps to one or more DMA transfers.
|
|
* When DMA completion isn't request completion, the UDC continues with
|
|
* the next DMA transfer for that USB transfer.
|
|
*/
|
|
|
|
static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
|
|
{
|
|
u16 txdma_ctrl;
|
|
unsigned length = req->req.length - req->req.actual;
|
|
const int sync_mode = cpu_is_omap15xx()
|
|
? OMAP_DMA_SYNC_FRAME
|
|
: OMAP_DMA_SYNC_ELEMENT;
|
|
|
|
/* measure length in either bytes or packets */
|
|
if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC)
|
|
|| (cpu_is_omap15xx() && length < ep->maxpacket)) {
|
|
txdma_ctrl = UDC_TXN_EOT | length;
|
|
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
|
|
length, 1, sync_mode, 0, 0);
|
|
} else {
|
|
length = min(length / ep->maxpacket,
|
|
(unsigned) UDC_TXN_TSC + 1);
|
|
txdma_ctrl = length;
|
|
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
|
|
ep->ep.maxpacket >> 1, length, sync_mode,
|
|
0, 0);
|
|
length *= ep->maxpacket;
|
|
}
|
|
omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF,
|
|
OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
|
|
0, 0);
|
|
|
|
omap_start_dma(ep->lch);
|
|
ep->dma_counter = dma_csac(ep->lch);
|
|
UDC_DMA_IRQ_EN_REG |= UDC_TX_DONE_IE(ep->dma_channel);
|
|
UDC_TXDMA_REG(ep->dma_channel) = UDC_TXN_START | txdma_ctrl;
|
|
req->dma_bytes = length;
|
|
}
|
|
|
|
static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status)
|
|
{
|
|
if (status == 0) {
|
|
req->req.actual += req->dma_bytes;
|
|
|
|
/* return if this request needs to send data or zlp */
|
|
if (req->req.actual < req->req.length)
|
|
return;
|
|
if (req->req.zero
|
|
&& req->dma_bytes != 0
|
|
&& (req->req.actual % ep->maxpacket) == 0)
|
|
return;
|
|
} else
|
|
req->req.actual += dma_src_len(ep, req->req.dma
|
|
+ req->req.actual);
|
|
|
|
/* tx completion */
|
|
omap_stop_dma(ep->lch);
|
|
UDC_DMA_IRQ_EN_REG &= ~UDC_TX_DONE_IE(ep->dma_channel);
|
|
done(ep, req, status);
|
|
}
|
|
|
|
static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
|
|
{
|
|
unsigned packets;
|
|
|
|
/* NOTE: we filtered out "short reads" before, so we know
|
|
* the buffer has only whole numbers of packets.
|
|
*/
|
|
|
|
/* set up this DMA transfer, enable the fifo, start */
|
|
packets = (req->req.length - req->req.actual) / ep->ep.maxpacket;
|
|
packets = min(packets, (unsigned)UDC_RXN_TC + 1);
|
|
req->dma_bytes = packets * ep->ep.maxpacket;
|
|
omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
|
|
ep->ep.maxpacket >> 1, packets,
|
|
OMAP_DMA_SYNC_ELEMENT,
|
|
0, 0);
|
|
omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
|
|
OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual,
|
|
0, 0);
|
|
ep->dma_counter = DMA_DEST_LAST(ep->lch);
|
|
|
|
UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1);
|
|
UDC_DMA_IRQ_EN_REG |= UDC_RX_EOT_IE(ep->dma_channel);
|
|
UDC_EP_NUM_REG = (ep->bEndpointAddress & 0xf);
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
|
|
omap_start_dma(ep->lch);
|
|
}
|
|
|
|
static void
|
|
finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one)
|
|
{
|
|
u16 count;
|
|
|
|
if (status == 0)
|
|
ep->dma_counter = (u16) (req->req.dma + req->req.actual);
|
|
count = dma_dest_len(ep, req->req.dma + req->req.actual);
|
|
count += req->req.actual;
|
|
if (one)
|
|
count--;
|
|
if (count <= req->req.length)
|
|
req->req.actual = count;
|
|
|
|
if (count != req->dma_bytes || status)
|
|
omap_stop_dma(ep->lch);
|
|
|
|
/* if this wasn't short, request may need another transfer */
|
|
else if (req->req.actual < req->req.length)
|
|
return;
|
|
|
|
/* rx completion */
|
|
UDC_DMA_IRQ_EN_REG &= ~UDC_RX_EOT_IE(ep->dma_channel);
|
|
done(ep, req, status);
|
|
}
|
|
|
|
static void dma_irq(struct omap_udc *udc, u16 irq_src)
|
|
{
|
|
u16 dman_stat = UDC_DMAN_STAT_REG;
|
|
struct omap_ep *ep;
|
|
struct omap_req *req;
|
|
|
|
/* IN dma: tx to host */
|
|
if (irq_src & UDC_TXN_DONE) {
|
|
ep = &udc->ep[16 + UDC_DMA_TX_SRC(dman_stat)];
|
|
ep->irqs++;
|
|
/* can see TXN_DONE after dma abort */
|
|
if (!list_empty(&ep->queue)) {
|
|
req = container_of(ep->queue.next,
|
|
struct omap_req, queue);
|
|
finish_in_dma(ep, req, 0);
|
|
}
|
|
UDC_IRQ_SRC_REG = UDC_TXN_DONE;
|
|
|
|
if (!list_empty (&ep->queue)) {
|
|
req = container_of(ep->queue.next,
|
|
struct omap_req, queue);
|
|
next_in_dma(ep, req);
|
|
}
|
|
}
|
|
|
|
/* OUT dma: rx from host */
|
|
if (irq_src & UDC_RXN_EOT) {
|
|
ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)];
|
|
ep->irqs++;
|
|
/* can see RXN_EOT after dma abort */
|
|
if (!list_empty(&ep->queue)) {
|
|
req = container_of(ep->queue.next,
|
|
struct omap_req, queue);
|
|
finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB);
|
|
}
|
|
UDC_IRQ_SRC_REG = UDC_RXN_EOT;
|
|
|
|
if (!list_empty (&ep->queue)) {
|
|
req = container_of(ep->queue.next,
|
|
struct omap_req, queue);
|
|
next_out_dma(ep, req);
|
|
}
|
|
}
|
|
|
|
if (irq_src & UDC_RXN_CNT) {
|
|
ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)];
|
|
ep->irqs++;
|
|
/* omap15xx does this unasked... */
|
|
VDBG("%s, RX_CNT irq?\n", ep->ep.name);
|
|
UDC_IRQ_SRC_REG = UDC_RXN_CNT;
|
|
}
|
|
}
|
|
|
|
static void dma_error(int lch, u16 ch_status, void *data)
|
|
{
|
|
struct omap_ep *ep = data;
|
|
|
|
/* if ch_status & OMAP_DMA_DROP_IRQ ... */
|
|
/* if ch_status & OMAP1_DMA_TOUT_IRQ ... */
|
|
ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
|
|
|
|
/* complete current transfer ... */
|
|
}
|
|
|
|
static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
|
|
{
|
|
u16 reg;
|
|
int status, restart, is_in;
|
|
|
|
is_in = ep->bEndpointAddress & USB_DIR_IN;
|
|
if (is_in)
|
|
reg = UDC_TXDMA_CFG_REG;
|
|
else
|
|
reg = UDC_RXDMA_CFG_REG;
|
|
reg |= UDC_DMA_REQ; /* "pulse" activated */
|
|
|
|
ep->dma_channel = 0;
|
|
ep->lch = -1;
|
|
if (channel == 0 || channel > 3) {
|
|
if ((reg & 0x0f00) == 0)
|
|
channel = 3;
|
|
else if ((reg & 0x00f0) == 0)
|
|
channel = 2;
|
|
else if ((reg & 0x000f) == 0) /* preferred for ISO */
|
|
channel = 1;
|
|
else {
|
|
status = -EMLINK;
|
|
goto just_restart;
|
|
}
|
|
}
|
|
reg |= (0x0f & ep->bEndpointAddress) << (4 * (channel - 1));
|
|
ep->dma_channel = channel;
|
|
|
|
if (is_in) {
|
|
status = omap_request_dma(OMAP_DMA_USB_W2FC_TX0 - 1 + channel,
|
|
ep->ep.name, dma_error, ep, &ep->lch);
|
|
if (status == 0) {
|
|
UDC_TXDMA_CFG_REG = reg;
|
|
/* EMIFF */
|
|
omap_set_dma_src_burst_mode(ep->lch,
|
|
OMAP_DMA_DATA_BURST_4);
|
|
omap_set_dma_src_data_pack(ep->lch, 1);
|
|
/* TIPB */
|
|
omap_set_dma_dest_params(ep->lch,
|
|
OMAP_DMA_PORT_TIPB,
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
|
|
0, 0);
|
|
}
|
|
} else {
|
|
status = omap_request_dma(OMAP_DMA_USB_W2FC_RX0 - 1 + channel,
|
|
ep->ep.name, dma_error, ep, &ep->lch);
|
|
if (status == 0) {
|
|
UDC_RXDMA_CFG_REG = reg;
|
|
/* TIPB */
|
|
omap_set_dma_src_params(ep->lch,
|
|
OMAP_DMA_PORT_TIPB,
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
(unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG),
|
|
0, 0);
|
|
/* EMIFF */
|
|
omap_set_dma_dest_burst_mode(ep->lch,
|
|
OMAP_DMA_DATA_BURST_4);
|
|
omap_set_dma_dest_data_pack(ep->lch, 1);
|
|
}
|
|
}
|
|
if (status)
|
|
ep->dma_channel = 0;
|
|
else {
|
|
ep->has_dma = 1;
|
|
omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ);
|
|
|
|
/* channel type P: hw synch (fifo) */
|
|
if (!cpu_is_omap15xx())
|
|
OMAP1_DMA_LCH_CTRL_REG(ep->lch) = 2;
|
|
}
|
|
|
|
just_restart:
|
|
/* restart any queue, even if the claim failed */
|
|
restart = !ep->stopped && !list_empty(&ep->queue);
|
|
|
|
if (status)
|
|
DBG("%s no dma channel: %d%s\n", ep->ep.name, status,
|
|
restart ? " (restart)" : "");
|
|
else
|
|
DBG("%s claimed %cxdma%d lch %d%s\n", ep->ep.name,
|
|
is_in ? 't' : 'r',
|
|
ep->dma_channel - 1, ep->lch,
|
|
restart ? " (restart)" : "");
|
|
|
|
if (restart) {
|
|
struct omap_req *req;
|
|
req = container_of(ep->queue.next, struct omap_req, queue);
|
|
if (ep->has_dma)
|
|
(is_in ? next_in_dma : next_out_dma)(ep, req);
|
|
else {
|
|
use_ep(ep, UDC_EP_SEL);
|
|
(is_in ? write_fifo : read_fifo)(ep, req);
|
|
deselect_ep();
|
|
if (!is_in) {
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
ep->ackwait = 1 + ep->double_buf;
|
|
}
|
|
/* IN: 6 wait states before it'll tx */
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dma_channel_release(struct omap_ep *ep)
|
|
{
|
|
int shift = 4 * (ep->dma_channel - 1);
|
|
u16 mask = 0x0f << shift;
|
|
struct omap_req *req;
|
|
int active;
|
|
|
|
/* abort any active usb transfer request */
|
|
if (!list_empty(&ep->queue))
|
|
req = container_of(ep->queue.next, struct omap_req, queue);
|
|
else
|
|
req = NULL;
|
|
|
|
active = ((1 << 7) & OMAP_DMA_CCR_REG(ep->lch)) != 0;
|
|
|
|
DBG("%s release %s %cxdma%d %p\n", ep->ep.name,
|
|
active ? "active" : "idle",
|
|
(ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
|
|
ep->dma_channel - 1, req);
|
|
|
|
/* NOTE: re-setting RX_REQ/TX_REQ because of a chip bug (before
|
|
* OMAP 1710 ES2.0) where reading the DMA_CFG can clear them.
|
|
*/
|
|
|
|
/* wait till current packet DMA finishes, and fifo empties */
|
|
if (ep->bEndpointAddress & USB_DIR_IN) {
|
|
UDC_TXDMA_CFG_REG = (UDC_TXDMA_CFG_REG & ~mask) | UDC_DMA_REQ;
|
|
|
|
if (req) {
|
|
finish_in_dma(ep, req, -ECONNRESET);
|
|
|
|
/* clear FIFO; hosts probably won't empty it */
|
|
use_ep(ep, UDC_EP_SEL);
|
|
UDC_CTRL_REG = UDC_CLR_EP;
|
|
deselect_ep();
|
|
}
|
|
while (UDC_TXDMA_CFG_REG & mask)
|
|
udelay(10);
|
|
} else {
|
|
UDC_RXDMA_CFG_REG = (UDC_RXDMA_CFG_REG & ~mask) | UDC_DMA_REQ;
|
|
|
|
/* dma empties the fifo */
|
|
while (UDC_RXDMA_CFG_REG & mask)
|
|
udelay(10);
|
|
if (req)
|
|
finish_out_dma(ep, req, -ECONNRESET, 0);
|
|
}
|
|
omap_free_dma(ep->lch);
|
|
ep->dma_channel = 0;
|
|
ep->lch = -1;
|
|
/* has_dma still set, till endpoint is fully quiesced */
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int
|
|
omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
|
|
{
|
|
struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
|
|
struct omap_req *req = container_of(_req, struct omap_req, req);
|
|
struct omap_udc *udc;
|
|
unsigned long flags;
|
|
int is_iso = 0;
|
|
|
|
/* catch various bogus parameters */
|
|
if (!_req || !req->req.complete || !req->req.buf
|
|
|| !list_empty(&req->queue)) {
|
|
DBG("%s, bad params\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
if (!_ep || (!ep->desc && ep->bEndpointAddress)) {
|
|
DBG("%s, bad ep\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
|
if (req->req.length > ep->ep.maxpacket)
|
|
return -EMSGSIZE;
|
|
is_iso = 1;
|
|
}
|
|
|
|
/* this isn't bogus, but OMAP DMA isn't the only hardware to
|
|
* have a hard time with partial packet reads... reject it.
|
|
*/
|
|
if (use_dma
|
|
&& ep->has_dma
|
|
&& ep->bEndpointAddress != 0
|
|
&& (ep->bEndpointAddress & USB_DIR_IN) == 0
|
|
&& (req->req.length % ep->ep.maxpacket) != 0) {
|
|
DBG("%s, no partial packet OUT reads\n", __FUNCTION__);
|
|
return -EMSGSIZE;
|
|
}
|
|
|
|
udc = ep->udc;
|
|
if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
|
|
return -ESHUTDOWN;
|
|
|
|
if (use_dma && ep->has_dma) {
|
|
if (req->req.dma == DMA_ADDR_INVALID) {
|
|
req->req.dma = dma_map_single(
|
|
ep->udc->gadget.dev.parent,
|
|
req->req.buf,
|
|
req->req.length,
|
|
(ep->bEndpointAddress & USB_DIR_IN)
|
|
? DMA_TO_DEVICE
|
|
: DMA_FROM_DEVICE);
|
|
req->mapped = 1;
|
|
} else {
|
|
dma_sync_single_for_device(
|
|
ep->udc->gadget.dev.parent,
|
|
req->req.dma, req->req.length,
|
|
(ep->bEndpointAddress & USB_DIR_IN)
|
|
? DMA_TO_DEVICE
|
|
: DMA_FROM_DEVICE);
|
|
req->mapped = 0;
|
|
}
|
|
}
|
|
|
|
VDBG("%s queue req %p, len %d buf %p\n",
|
|
ep->ep.name, _req, _req->length, _req->buf);
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
|
|
req->req.status = -EINPROGRESS;
|
|
req->req.actual = 0;
|
|
|
|
/* maybe kickstart non-iso i/o queues */
|
|
if (is_iso)
|
|
UDC_IRQ_EN_REG |= UDC_SOF_IE;
|
|
else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) {
|
|
int is_in;
|
|
|
|
if (ep->bEndpointAddress == 0) {
|
|
if (!udc->ep0_pending || !list_empty (&ep->queue)) {
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
return -EL2HLT;
|
|
}
|
|
|
|
/* empty DATA stage? */
|
|
is_in = udc->ep0_in;
|
|
if (!req->req.length) {
|
|
|
|
/* chip became CONFIGURED or ADDRESSED
|
|
* earlier; drivers may already have queued
|
|
* requests to non-control endpoints
|
|
*/
|
|
if (udc->ep0_set_config) {
|
|
u16 irq_en = UDC_IRQ_EN_REG;
|
|
|
|
irq_en |= UDC_DS_CHG_IE | UDC_EP0_IE;
|
|
if (!udc->ep0_reset_config)
|
|
irq_en |= UDC_EPN_RX_IE
|
|
| UDC_EPN_TX_IE;
|
|
UDC_IRQ_EN_REG = irq_en;
|
|
}
|
|
|
|
/* STATUS for zero length DATA stages is
|
|
* always an IN ... even for IN transfers,
|
|
* a wierd case which seem to stall OMAP.
|
|
*/
|
|
UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR);
|
|
UDC_CTRL_REG = UDC_CLR_EP;
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
UDC_EP_NUM_REG = UDC_EP_DIR;
|
|
|
|
/* cleanup */
|
|
udc->ep0_pending = 0;
|
|
done(ep, req, 0);
|
|
req = NULL;
|
|
|
|
/* non-empty DATA stage */
|
|
} else if (is_in) {
|
|
UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
|
|
} else {
|
|
if (udc->ep0_setup)
|
|
goto irq_wait;
|
|
UDC_EP_NUM_REG = UDC_EP_SEL;
|
|
}
|
|
} else {
|
|
is_in = ep->bEndpointAddress & USB_DIR_IN;
|
|
if (!ep->has_dma)
|
|
use_ep(ep, UDC_EP_SEL);
|
|
/* if ISO: SOF IRQs must be enabled/disabled! */
|
|
}
|
|
|
|
if (ep->has_dma)
|
|
(is_in ? next_in_dma : next_out_dma)(ep, req);
|
|
else if (req) {
|
|
if ((is_in ? write_fifo : read_fifo)(ep, req) == 1)
|
|
req = NULL;
|
|
deselect_ep();
|
|
if (!is_in) {
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
ep->ackwait = 1 + ep->double_buf;
|
|
}
|
|
/* IN: 6 wait states before it'll tx */
|
|
}
|
|
}
|
|
|
|
irq_wait:
|
|
/* irq handler advances the queue */
|
|
if (req != NULL)
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
|
|
struct omap_req *req;
|
|
unsigned long flags;
|
|
|
|
if (!_ep || !_req)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&ep->udc->lock, flags);
|
|
|
|
/* make sure it's actually queued on this endpoint */
|
|
list_for_each_entry (req, &ep->queue, queue) {
|
|
if (&req->req == _req)
|
|
break;
|
|
}
|
|
if (&req->req != _req) {
|
|
spin_unlock_irqrestore(&ep->udc->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (use_dma && ep->dma_channel && ep->queue.next == &req->queue) {
|
|
int channel = ep->dma_channel;
|
|
|
|
/* releasing the channel cancels the request,
|
|
* reclaiming the channel restarts the queue
|
|
*/
|
|
dma_channel_release(ep);
|
|
dma_channel_claim(ep, channel);
|
|
} else
|
|
done(ep, req, -ECONNRESET);
|
|
spin_unlock_irqrestore(&ep->udc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int omap_ep_set_halt(struct usb_ep *_ep, int value)
|
|
{
|
|
struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
|
|
unsigned long flags;
|
|
int status = -EOPNOTSUPP;
|
|
|
|
spin_lock_irqsave(&ep->udc->lock, flags);
|
|
|
|
/* just use protocol stalls for ep0; real halts are annoying */
|
|
if (ep->bEndpointAddress == 0) {
|
|
if (!ep->udc->ep0_pending)
|
|
status = -EINVAL;
|
|
else if (value) {
|
|
if (ep->udc->ep0_set_config) {
|
|
WARN("error changing config?\n");
|
|
UDC_SYSCON2_REG = UDC_CLR_CFG;
|
|
}
|
|
UDC_SYSCON2_REG = UDC_STALL_CMD;
|
|
ep->udc->ep0_pending = 0;
|
|
status = 0;
|
|
} else /* NOP */
|
|
status = 0;
|
|
|
|
/* otherwise, all active non-ISO endpoints can halt */
|
|
} else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->desc) {
|
|
|
|
/* IN endpoints must already be idle */
|
|
if ((ep->bEndpointAddress & USB_DIR_IN)
|
|
&& !list_empty(&ep->queue)) {
|
|
status = -EAGAIN;
|
|
goto done;
|
|
}
|
|
|
|
if (value) {
|
|
int channel;
|
|
|
|
if (use_dma && ep->dma_channel
|
|
&& !list_empty(&ep->queue)) {
|
|
channel = ep->dma_channel;
|
|
dma_channel_release(ep);
|
|
} else
|
|
channel = 0;
|
|
|
|
use_ep(ep, UDC_EP_SEL);
|
|
if (UDC_STAT_FLG_REG & UDC_NON_ISO_FIFO_EMPTY) {
|
|
UDC_CTRL_REG = UDC_SET_HALT;
|
|
status = 0;
|
|
} else
|
|
status = -EAGAIN;
|
|
deselect_ep();
|
|
|
|
if (channel)
|
|
dma_channel_claim(ep, channel);
|
|
} else {
|
|
use_ep(ep, 0);
|
|
UDC_CTRL_REG = ep->udc->clr_halt;
|
|
ep->ackwait = 0;
|
|
if (!(ep->bEndpointAddress & USB_DIR_IN)) {
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
ep->ackwait = 1 + ep->double_buf;
|
|
}
|
|
}
|
|
}
|
|
done:
|
|
VDBG("%s %s halt stat %d\n", ep->ep.name,
|
|
value ? "set" : "clear", status);
|
|
|
|
spin_unlock_irqrestore(&ep->udc->lock, flags);
|
|
return status;
|
|
}
|
|
|
|
static struct usb_ep_ops omap_ep_ops = {
|
|
.enable = omap_ep_enable,
|
|
.disable = omap_ep_disable,
|
|
|
|
.alloc_request = omap_alloc_request,
|
|
.free_request = omap_free_request,
|
|
|
|
.queue = omap_ep_queue,
|
|
.dequeue = omap_ep_dequeue,
|
|
|
|
.set_halt = omap_ep_set_halt,
|
|
// fifo_status ... report bytes in fifo
|
|
// fifo_flush ... flush fifo
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int omap_get_frame(struct usb_gadget *gadget)
|
|
{
|
|
u16 sof = UDC_SOF_REG;
|
|
return (sof & UDC_TS_OK) ? (sof & UDC_TS) : -EL2NSYNC;
|
|
}
|
|
|
|
static int omap_wakeup(struct usb_gadget *gadget)
|
|
{
|
|
struct omap_udc *udc;
|
|
unsigned long flags;
|
|
int retval = -EHOSTUNREACH;
|
|
|
|
udc = container_of(gadget, struct omap_udc, gadget);
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
if (udc->devstat & UDC_SUS) {
|
|
/* NOTE: OTG spec erratum says that OTG devices may
|
|
* issue wakeups without host enable.
|
|
*/
|
|
if (udc->devstat & (UDC_B_HNP_ENABLE|UDC_R_WK_OK)) {
|
|
DBG("remote wakeup...\n");
|
|
UDC_SYSCON2_REG = UDC_RMT_WKP;
|
|
retval = 0;
|
|
}
|
|
|
|
/* NOTE: non-OTG systems may use SRP TOO... */
|
|
} else if (!(udc->devstat & UDC_ATT)) {
|
|
if (udc->transceiver)
|
|
retval = otg_start_srp(udc->transceiver);
|
|
}
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
omap_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
|
|
{
|
|
struct omap_udc *udc;
|
|
unsigned long flags;
|
|
u16 syscon1;
|
|
|
|
udc = container_of(gadget, struct omap_udc, gadget);
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
syscon1 = UDC_SYSCON1_REG;
|
|
if (is_selfpowered)
|
|
syscon1 |= UDC_SELF_PWR;
|
|
else
|
|
syscon1 &= ~UDC_SELF_PWR;
|
|
UDC_SYSCON1_REG = syscon1;
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int can_pullup(struct omap_udc *udc)
|
|
{
|
|
return udc->driver && udc->softconnect && udc->vbus_active;
|
|
}
|
|
|
|
static void pullup_enable(struct omap_udc *udc)
|
|
{
|
|
udc->gadget.dev.parent->power.power_state = PMSG_ON;
|
|
udc->gadget.dev.power.power_state = PMSG_ON;
|
|
UDC_SYSCON1_REG |= UDC_PULLUP_EN;
|
|
if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
|
|
OTG_CTRL_REG |= OTG_BSESSVLD;
|
|
UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
|
|
}
|
|
|
|
static void pullup_disable(struct omap_udc *udc)
|
|
{
|
|
if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
|
|
OTG_CTRL_REG &= ~OTG_BSESSVLD;
|
|
UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
|
|
UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
|
|
}
|
|
|
|
static struct omap_udc *udc;
|
|
|
|
static void omap_udc_enable_clock(int enable)
|
|
{
|
|
if (udc == NULL || udc->dc_clk == NULL || udc->hhc_clk == NULL)
|
|
return;
|
|
|
|
if (enable) {
|
|
clk_enable(udc->dc_clk);
|
|
clk_enable(udc->hhc_clk);
|
|
udelay(100);
|
|
} else {
|
|
clk_disable(udc->hhc_clk);
|
|
clk_disable(udc->dc_clk);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Called by whatever detects VBUS sessions: external transceiver
|
|
* driver, or maybe GPIO0 VBUS IRQ. May request 48 MHz clock.
|
|
*/
|
|
static int omap_vbus_session(struct usb_gadget *gadget, int is_active)
|
|
{
|
|
struct omap_udc *udc;
|
|
unsigned long flags;
|
|
|
|
udc = container_of(gadget, struct omap_udc, gadget);
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
VDBG("VBUS %s\n", is_active ? "on" : "off");
|
|
udc->vbus_active = (is_active != 0);
|
|
if (cpu_is_omap15xx()) {
|
|
/* "software" detect, ignored if !VBUS_MODE_1510 */
|
|
if (is_active)
|
|
FUNC_MUX_CTRL_0_REG |= VBUS_CTRL_1510;
|
|
else
|
|
FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
|
|
}
|
|
if (udc->dc_clk != NULL && is_active) {
|
|
if (!udc->clk_requested) {
|
|
omap_udc_enable_clock(1);
|
|
udc->clk_requested = 1;
|
|
}
|
|
}
|
|
if (can_pullup(udc))
|
|
pullup_enable(udc);
|
|
else
|
|
pullup_disable(udc);
|
|
if (udc->dc_clk != NULL && !is_active) {
|
|
if (udc->clk_requested) {
|
|
omap_udc_enable_clock(0);
|
|
udc->clk_requested = 0;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
|
|
{
|
|
struct omap_udc *udc;
|
|
|
|
udc = container_of(gadget, struct omap_udc, gadget);
|
|
if (udc->transceiver)
|
|
return otg_set_power(udc->transceiver, mA);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int omap_pullup(struct usb_gadget *gadget, int is_on)
|
|
{
|
|
struct omap_udc *udc;
|
|
unsigned long flags;
|
|
|
|
udc = container_of(gadget, struct omap_udc, gadget);
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
udc->softconnect = (is_on != 0);
|
|
if (can_pullup(udc))
|
|
pullup_enable(udc);
|
|
else
|
|
pullup_disable(udc);
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_gadget_ops omap_gadget_ops = {
|
|
.get_frame = omap_get_frame,
|
|
.wakeup = omap_wakeup,
|
|
.set_selfpowered = omap_set_selfpowered,
|
|
.vbus_session = omap_vbus_session,
|
|
.vbus_draw = omap_vbus_draw,
|
|
.pullup = omap_pullup,
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* dequeue ALL requests; caller holds udc->lock */
|
|
static void nuke(struct omap_ep *ep, int status)
|
|
{
|
|
struct omap_req *req;
|
|
|
|
ep->stopped = 1;
|
|
|
|
if (use_dma && ep->dma_channel)
|
|
dma_channel_release(ep);
|
|
|
|
use_ep(ep, 0);
|
|
UDC_CTRL_REG = UDC_CLR_EP;
|
|
if (ep->bEndpointAddress && ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
|
|
UDC_CTRL_REG = UDC_SET_HALT;
|
|
|
|
while (!list_empty(&ep->queue)) {
|
|
req = list_entry(ep->queue.next, struct omap_req, queue);
|
|
done(ep, req, status);
|
|
}
|
|
}
|
|
|
|
/* caller holds udc->lock */
|
|
static void udc_quiesce(struct omap_udc *udc)
|
|
{
|
|
struct omap_ep *ep;
|
|
|
|
udc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
nuke(&udc->ep[0], -ESHUTDOWN);
|
|
list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list)
|
|
nuke(ep, -ESHUTDOWN);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void update_otg(struct omap_udc *udc)
|
|
{
|
|
u16 devstat;
|
|
|
|
if (!gadget_is_otg(&udc->gadget))
|
|
return;
|
|
|
|
if (OTG_CTRL_REG & OTG_ID)
|
|
devstat = UDC_DEVSTAT_REG;
|
|
else
|
|
devstat = 0;
|
|
|
|
udc->gadget.b_hnp_enable = !!(devstat & UDC_B_HNP_ENABLE);
|
|
udc->gadget.a_hnp_support = !!(devstat & UDC_A_HNP_SUPPORT);
|
|
udc->gadget.a_alt_hnp_support = !!(devstat & UDC_A_ALT_HNP_SUPPORT);
|
|
|
|
/* Enable HNP early, avoiding races on suspend irq path.
|
|
* ASSUMES OTG state machine B_BUS_REQ input is true.
|
|
*/
|
|
if (udc->gadget.b_hnp_enable)
|
|
OTG_CTRL_REG = (OTG_CTRL_REG | OTG_B_HNPEN | OTG_B_BUSREQ)
|
|
& ~OTG_PULLUP;
|
|
}
|
|
|
|
static void ep0_irq(struct omap_udc *udc, u16 irq_src)
|
|
{
|
|
struct omap_ep *ep0 = &udc->ep[0];
|
|
struct omap_req *req = NULL;
|
|
|
|
ep0->irqs++;
|
|
|
|
/* Clear any pending requests and then scrub any rx/tx state
|
|
* before starting to handle the SETUP request.
|
|
*/
|
|
if (irq_src & UDC_SETUP) {
|
|
u16 ack = irq_src & (UDC_EP0_TX|UDC_EP0_RX);
|
|
|
|
nuke(ep0, 0);
|
|
if (ack) {
|
|
UDC_IRQ_SRC_REG = ack;
|
|
irq_src = UDC_SETUP;
|
|
}
|
|
}
|
|
|
|
/* IN/OUT packets mean we're in the DATA or STATUS stage.
|
|
* This driver uses only uses protocol stalls (ep0 never halts),
|
|
* and if we got this far the gadget driver already had a
|
|
* chance to stall. Tries to be forgiving of host oddities.
|
|
*
|
|
* NOTE: the last chance gadget drivers have to stall control
|
|
* requests is during their request completion callback.
|
|
*/
|
|
if (!list_empty(&ep0->queue))
|
|
req = container_of(ep0->queue.next, struct omap_req, queue);
|
|
|
|
/* IN == TX to host */
|
|
if (irq_src & UDC_EP0_TX) {
|
|
int stat;
|
|
|
|
UDC_IRQ_SRC_REG = UDC_EP0_TX;
|
|
UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
|
|
stat = UDC_STAT_FLG_REG;
|
|
if (stat & UDC_ACK) {
|
|
if (udc->ep0_in) {
|
|
/* write next IN packet from response,
|
|
* or set up the status stage.
|
|
*/
|
|
if (req)
|
|
stat = write_fifo(ep0, req);
|
|
UDC_EP_NUM_REG = UDC_EP_DIR;
|
|
if (!req && udc->ep0_pending) {
|
|
UDC_EP_NUM_REG = UDC_EP_SEL;
|
|
UDC_CTRL_REG = UDC_CLR_EP;
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
UDC_EP_NUM_REG = 0;
|
|
udc->ep0_pending = 0;
|
|
} /* else: 6 wait states before it'll tx */
|
|
} else {
|
|
/* ack status stage of OUT transfer */
|
|
UDC_EP_NUM_REG = UDC_EP_DIR;
|
|
if (req)
|
|
done(ep0, req, 0);
|
|
}
|
|
req = NULL;
|
|
} else if (stat & UDC_STALL) {
|
|
UDC_CTRL_REG = UDC_CLR_HALT;
|
|
UDC_EP_NUM_REG = UDC_EP_DIR;
|
|
} else {
|
|
UDC_EP_NUM_REG = UDC_EP_DIR;
|
|
}
|
|
}
|
|
|
|
/* OUT == RX from host */
|
|
if (irq_src & UDC_EP0_RX) {
|
|
int stat;
|
|
|
|
UDC_IRQ_SRC_REG = UDC_EP0_RX;
|
|
UDC_EP_NUM_REG = UDC_EP_SEL;
|
|
stat = UDC_STAT_FLG_REG;
|
|
if (stat & UDC_ACK) {
|
|
if (!udc->ep0_in) {
|
|
stat = 0;
|
|
/* read next OUT packet of request, maybe
|
|
* reactiviting the fifo; stall on errors.
|
|
*/
|
|
if (!req || (stat = read_fifo(ep0, req)) < 0) {
|
|
UDC_SYSCON2_REG = UDC_STALL_CMD;
|
|
udc->ep0_pending = 0;
|
|
stat = 0;
|
|
} else if (stat == 0)
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
UDC_EP_NUM_REG = 0;
|
|
|
|
/* activate status stage */
|
|
if (stat == 1) {
|
|
done(ep0, req, 0);
|
|
/* that may have STALLed ep0... */
|
|
UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
|
|
UDC_CTRL_REG = UDC_CLR_EP;
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
UDC_EP_NUM_REG = UDC_EP_DIR;
|
|
udc->ep0_pending = 0;
|
|
}
|
|
} else {
|
|
/* ack status stage of IN transfer */
|
|
UDC_EP_NUM_REG = 0;
|
|
if (req)
|
|
done(ep0, req, 0);
|
|
}
|
|
} else if (stat & UDC_STALL) {
|
|
UDC_CTRL_REG = UDC_CLR_HALT;
|
|
UDC_EP_NUM_REG = 0;
|
|
} else {
|
|
UDC_EP_NUM_REG = 0;
|
|
}
|
|
}
|
|
|
|
/* SETUP starts all control transfers */
|
|
if (irq_src & UDC_SETUP) {
|
|
union u {
|
|
u16 word[4];
|
|
struct usb_ctrlrequest r;
|
|
} u;
|
|
int status = -EINVAL;
|
|
struct omap_ep *ep;
|
|
|
|
/* read the (latest) SETUP message */
|
|
do {
|
|
UDC_EP_NUM_REG = UDC_SETUP_SEL;
|
|
/* two bytes at a time */
|
|
u.word[0] = UDC_DATA_REG;
|
|
u.word[1] = UDC_DATA_REG;
|
|
u.word[2] = UDC_DATA_REG;
|
|
u.word[3] = UDC_DATA_REG;
|
|
UDC_EP_NUM_REG = 0;
|
|
} while (UDC_IRQ_SRC_REG & UDC_SETUP);
|
|
|
|
#define w_value le16_to_cpu(u.r.wValue)
|
|
#define w_index le16_to_cpu(u.r.wIndex)
|
|
#define w_length le16_to_cpu(u.r.wLength)
|
|
|
|
/* Delegate almost all control requests to the gadget driver,
|
|
* except for a handful of ch9 status/feature requests that
|
|
* hardware doesn't autodecode _and_ the gadget API hides.
|
|
*/
|
|
udc->ep0_in = (u.r.bRequestType & USB_DIR_IN) != 0;
|
|
udc->ep0_set_config = 0;
|
|
udc->ep0_pending = 1;
|
|
ep0->stopped = 0;
|
|
ep0->ackwait = 0;
|
|
switch (u.r.bRequest) {
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
/* udc needs to know when ep != 0 is valid */
|
|
if (u.r.bRequestType != USB_RECIP_DEVICE)
|
|
goto delegate;
|
|
if (w_length != 0)
|
|
goto do_stall;
|
|
udc->ep0_set_config = 1;
|
|
udc->ep0_reset_config = (w_value == 0);
|
|
VDBG("set config %d\n", w_value);
|
|
|
|
/* update udc NOW since gadget driver may start
|
|
* queueing requests immediately; clear config
|
|
* later if it fails the request.
|
|
*/
|
|
if (udc->ep0_reset_config)
|
|
UDC_SYSCON2_REG = UDC_CLR_CFG;
|
|
else
|
|
UDC_SYSCON2_REG = UDC_DEV_CFG;
|
|
update_otg(udc);
|
|
goto delegate;
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
/* clear endpoint halt */
|
|
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
|
|
goto delegate;
|
|
if (w_value != USB_ENDPOINT_HALT
|
|
|| w_length != 0)
|
|
goto do_stall;
|
|
ep = &udc->ep[w_index & 0xf];
|
|
if (ep != ep0) {
|
|
if (w_index & USB_DIR_IN)
|
|
ep += 16;
|
|
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
|
|
|| !ep->desc)
|
|
goto do_stall;
|
|
use_ep(ep, 0);
|
|
UDC_CTRL_REG = udc->clr_halt;
|
|
ep->ackwait = 0;
|
|
if (!(ep->bEndpointAddress & USB_DIR_IN)) {
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
ep->ackwait = 1 + ep->double_buf;
|
|
}
|
|
/* NOTE: assumes the host behaves sanely,
|
|
* only clearing real halts. Else we may
|
|
* need to kill pending transfers and then
|
|
* restart the queue... very messy for DMA!
|
|
*/
|
|
}
|
|
VDBG("%s halt cleared by host\n", ep->name);
|
|
goto ep0out_status_stage;
|
|
case USB_REQ_SET_FEATURE:
|
|
/* set endpoint halt */
|
|
if (u.r.bRequestType != USB_RECIP_ENDPOINT)
|
|
goto delegate;
|
|
if (w_value != USB_ENDPOINT_HALT
|
|
|| w_length != 0)
|
|
goto do_stall;
|
|
ep = &udc->ep[w_index & 0xf];
|
|
if (w_index & USB_DIR_IN)
|
|
ep += 16;
|
|
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
|
|
|| ep == ep0 || !ep->desc)
|
|
goto do_stall;
|
|
if (use_dma && ep->has_dma) {
|
|
/* this has rude side-effects (aborts) and
|
|
* can't really work if DMA-IN is active
|
|
*/
|
|
DBG("%s host set_halt, NYET \n", ep->name);
|
|
goto do_stall;
|
|
}
|
|
use_ep(ep, 0);
|
|
/* can't halt if fifo isn't empty... */
|
|
UDC_CTRL_REG = UDC_CLR_EP;
|
|
UDC_CTRL_REG = UDC_SET_HALT;
|
|
VDBG("%s halted by host\n", ep->name);
|
|
ep0out_status_stage:
|
|
status = 0;
|
|
UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
|
|
UDC_CTRL_REG = UDC_CLR_EP;
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
UDC_EP_NUM_REG = UDC_EP_DIR;
|
|
udc->ep0_pending = 0;
|
|
break;
|
|
case USB_REQ_GET_STATUS:
|
|
/* USB_ENDPOINT_HALT status? */
|
|
if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
|
|
goto intf_status;
|
|
|
|
/* ep0 never stalls */
|
|
if (!(w_index & 0xf))
|
|
goto zero_status;
|
|
|
|
/* only active endpoints count */
|
|
ep = &udc->ep[w_index & 0xf];
|
|
if (w_index & USB_DIR_IN)
|
|
ep += 16;
|
|
if (!ep->desc)
|
|
goto do_stall;
|
|
|
|
/* iso never stalls */
|
|
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
|
|
goto zero_status;
|
|
|
|
/* FIXME don't assume non-halted endpoints!! */
|
|
ERR("%s status, can't report\n", ep->ep.name);
|
|
goto do_stall;
|
|
|
|
intf_status:
|
|
/* return interface status. if we were pedantic,
|
|
* we'd detect non-existent interfaces, and stall.
|
|
*/
|
|
if (u.r.bRequestType
|
|
!= (USB_DIR_IN|USB_RECIP_INTERFACE))
|
|
goto delegate;
|
|
|
|
zero_status:
|
|
/* return two zero bytes */
|
|
UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
|
|
UDC_DATA_REG = 0;
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
UDC_EP_NUM_REG = UDC_EP_DIR;
|
|
status = 0;
|
|
VDBG("GET_STATUS, interface %d\n", w_index);
|
|
/* next, status stage */
|
|
break;
|
|
default:
|
|
delegate:
|
|
/* activate the ep0out fifo right away */
|
|
if (!udc->ep0_in && w_length) {
|
|
UDC_EP_NUM_REG = 0;
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
}
|
|
|
|
/* gadget drivers see class/vendor specific requests,
|
|
* {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
|
|
* and more
|
|
*/
|
|
VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n",
|
|
u.r.bRequestType, u.r.bRequest,
|
|
w_value, w_index, w_length);
|
|
|
|
#undef w_value
|
|
#undef w_index
|
|
#undef w_length
|
|
|
|
/* The gadget driver may return an error here,
|
|
* causing an immediate protocol stall.
|
|
*
|
|
* Else it must issue a response, either queueing a
|
|
* response buffer for the DATA stage, or halting ep0
|
|
* (causing a protocol stall, not a real halt). A
|
|
* zero length buffer means no DATA stage.
|
|
*
|
|
* It's fine to issue that response after the setup()
|
|
* call returns, and this IRQ was handled.
|
|
*/
|
|
udc->ep0_setup = 1;
|
|
spin_unlock(&udc->lock);
|
|
status = udc->driver->setup (&udc->gadget, &u.r);
|
|
spin_lock(&udc->lock);
|
|
udc->ep0_setup = 0;
|
|
}
|
|
|
|
if (status < 0) {
|
|
do_stall:
|
|
VDBG("req %02x.%02x protocol STALL; stat %d\n",
|
|
u.r.bRequestType, u.r.bRequest, status);
|
|
if (udc->ep0_set_config) {
|
|
if (udc->ep0_reset_config)
|
|
WARN("error resetting config?\n");
|
|
else
|
|
UDC_SYSCON2_REG = UDC_CLR_CFG;
|
|
}
|
|
UDC_SYSCON2_REG = UDC_STALL_CMD;
|
|
udc->ep0_pending = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#define OTG_FLAGS (UDC_B_HNP_ENABLE|UDC_A_HNP_SUPPORT|UDC_A_ALT_HNP_SUPPORT)
|
|
|
|
static void devstate_irq(struct omap_udc *udc, u16 irq_src)
|
|
{
|
|
u16 devstat, change;
|
|
|
|
devstat = UDC_DEVSTAT_REG;
|
|
change = devstat ^ udc->devstat;
|
|
udc->devstat = devstat;
|
|
|
|
if (change & (UDC_USB_RESET|UDC_ATT)) {
|
|
udc_quiesce(udc);
|
|
|
|
if (change & UDC_ATT) {
|
|
/* driver for any external transceiver will
|
|
* have called omap_vbus_session() already
|
|
*/
|
|
if (devstat & UDC_ATT) {
|
|
udc->gadget.speed = USB_SPEED_FULL;
|
|
VDBG("connect\n");
|
|
if (!udc->transceiver)
|
|
pullup_enable(udc);
|
|
// if (driver->connect) call it
|
|
} else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
|
|
udc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
if (!udc->transceiver)
|
|
pullup_disable(udc);
|
|
DBG("disconnect, gadget %s\n",
|
|
udc->driver->driver.name);
|
|
if (udc->driver->disconnect) {
|
|
spin_unlock(&udc->lock);
|
|
udc->driver->disconnect(&udc->gadget);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
}
|
|
change &= ~UDC_ATT;
|
|
}
|
|
|
|
if (change & UDC_USB_RESET) {
|
|
if (devstat & UDC_USB_RESET) {
|
|
VDBG("RESET=1\n");
|
|
} else {
|
|
udc->gadget.speed = USB_SPEED_FULL;
|
|
INFO("USB reset done, gadget %s\n",
|
|
udc->driver->driver.name);
|
|
/* ep0 traffic is legal from now on */
|
|
UDC_IRQ_EN_REG = UDC_DS_CHG_IE | UDC_EP0_IE;
|
|
}
|
|
change &= ~UDC_USB_RESET;
|
|
}
|
|
}
|
|
if (change & UDC_SUS) {
|
|
if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
|
|
// FIXME tell isp1301 to suspend/resume (?)
|
|
if (devstat & UDC_SUS) {
|
|
VDBG("suspend\n");
|
|
update_otg(udc);
|
|
/* HNP could be under way already */
|
|
if (udc->gadget.speed == USB_SPEED_FULL
|
|
&& udc->driver->suspend) {
|
|
spin_unlock(&udc->lock);
|
|
udc->driver->suspend(&udc->gadget);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
if (udc->transceiver)
|
|
otg_set_suspend(udc->transceiver, 1);
|
|
} else {
|
|
VDBG("resume\n");
|
|
if (udc->transceiver)
|
|
otg_set_suspend(udc->transceiver, 0);
|
|
if (udc->gadget.speed == USB_SPEED_FULL
|
|
&& udc->driver->resume) {
|
|
spin_unlock(&udc->lock);
|
|
udc->driver->resume(&udc->gadget);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
}
|
|
}
|
|
change &= ~UDC_SUS;
|
|
}
|
|
if (!cpu_is_omap15xx() && (change & OTG_FLAGS)) {
|
|
update_otg(udc);
|
|
change &= ~OTG_FLAGS;
|
|
}
|
|
|
|
change &= ~(UDC_CFG|UDC_DEF|UDC_ADD);
|
|
if (change)
|
|
VDBG("devstat %03x, ignore change %03x\n",
|
|
devstat, change);
|
|
|
|
UDC_IRQ_SRC_REG = UDC_DS_CHG;
|
|
}
|
|
|
|
static irqreturn_t omap_udc_irq(int irq, void *_udc)
|
|
{
|
|
struct omap_udc *udc = _udc;
|
|
u16 irq_src;
|
|
irqreturn_t status = IRQ_NONE;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
irq_src = UDC_IRQ_SRC_REG;
|
|
|
|
/* Device state change (usb ch9 stuff) */
|
|
if (irq_src & UDC_DS_CHG) {
|
|
devstate_irq(_udc, irq_src);
|
|
status = IRQ_HANDLED;
|
|
irq_src &= ~UDC_DS_CHG;
|
|
}
|
|
|
|
/* EP0 control transfers */
|
|
if (irq_src & (UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX)) {
|
|
ep0_irq(_udc, irq_src);
|
|
status = IRQ_HANDLED;
|
|
irq_src &= ~(UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX);
|
|
}
|
|
|
|
/* DMA transfer completion */
|
|
if (use_dma && (irq_src & (UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT))) {
|
|
dma_irq(_udc, irq_src);
|
|
status = IRQ_HANDLED;
|
|
irq_src &= ~(UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT);
|
|
}
|
|
|
|
irq_src &= ~(UDC_SOF|UDC_EPN_TX|UDC_EPN_RX);
|
|
if (irq_src)
|
|
DBG("udc_irq, unhandled %03x\n", irq_src);
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* workaround for seemingly-lost IRQs for RX ACKs... */
|
|
#define PIO_OUT_TIMEOUT (jiffies + HZ/3)
|
|
#define HALF_FULL(f) (!((f)&(UDC_NON_ISO_FIFO_FULL|UDC_NON_ISO_FIFO_EMPTY)))
|
|
|
|
static void pio_out_timer(unsigned long _ep)
|
|
{
|
|
struct omap_ep *ep = (void *) _ep;
|
|
unsigned long flags;
|
|
u16 stat_flg;
|
|
|
|
spin_lock_irqsave(&ep->udc->lock, flags);
|
|
if (!list_empty(&ep->queue) && ep->ackwait) {
|
|
use_ep(ep, UDC_EP_SEL);
|
|
stat_flg = UDC_STAT_FLG_REG;
|
|
|
|
if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN)
|
|
|| (ep->double_buf && HALF_FULL(stat_flg)))) {
|
|
struct omap_req *req;
|
|
|
|
VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg);
|
|
req = container_of(ep->queue.next,
|
|
struct omap_req, queue);
|
|
(void) read_fifo(ep, req);
|
|
UDC_EP_NUM_REG = ep->bEndpointAddress;
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
ep->ackwait = 1 + ep->double_buf;
|
|
} else
|
|
deselect_ep();
|
|
}
|
|
mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
|
|
spin_unlock_irqrestore(&ep->udc->lock, flags);
|
|
}
|
|
|
|
static irqreturn_t omap_udc_pio_irq(int irq, void *_dev)
|
|
{
|
|
u16 epn_stat, irq_src;
|
|
irqreturn_t status = IRQ_NONE;
|
|
struct omap_ep *ep;
|
|
int epnum;
|
|
struct omap_udc *udc = _dev;
|
|
struct omap_req *req;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
epn_stat = UDC_EPN_STAT_REG;
|
|
irq_src = UDC_IRQ_SRC_REG;
|
|
|
|
/* handle OUT first, to avoid some wasteful NAKs */
|
|
if (irq_src & UDC_EPN_RX) {
|
|
epnum = (epn_stat >> 8) & 0x0f;
|
|
UDC_IRQ_SRC_REG = UDC_EPN_RX;
|
|
status = IRQ_HANDLED;
|
|
ep = &udc->ep[epnum];
|
|
ep->irqs++;
|
|
|
|
UDC_EP_NUM_REG = epnum | UDC_EP_SEL;
|
|
ep->fnf = 0;
|
|
if ((UDC_STAT_FLG_REG & UDC_ACK)) {
|
|
ep->ackwait--;
|
|
if (!list_empty(&ep->queue)) {
|
|
int stat;
|
|
req = container_of(ep->queue.next,
|
|
struct omap_req, queue);
|
|
stat = read_fifo(ep, req);
|
|
if (!ep->double_buf)
|
|
ep->fnf = 1;
|
|
}
|
|
}
|
|
/* min 6 clock delay before clearing EP_SEL ... */
|
|
epn_stat = UDC_EPN_STAT_REG;
|
|
epn_stat = UDC_EPN_STAT_REG;
|
|
UDC_EP_NUM_REG = epnum;
|
|
|
|
/* enabling fifo _after_ clearing ACK, contrary to docs,
|
|
* reduces lossage; timer still needed though (sigh).
|
|
*/
|
|
if (ep->fnf) {
|
|
UDC_CTRL_REG = UDC_SET_FIFO_EN;
|
|
ep->ackwait = 1 + ep->double_buf;
|
|
}
|
|
mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
|
|
}
|
|
|
|
/* then IN transfers */
|
|
else if (irq_src & UDC_EPN_TX) {
|
|
epnum = epn_stat & 0x0f;
|
|
UDC_IRQ_SRC_REG = UDC_EPN_TX;
|
|
status = IRQ_HANDLED;
|
|
ep = &udc->ep[16 + epnum];
|
|
ep->irqs++;
|
|
|
|
UDC_EP_NUM_REG = epnum | UDC_EP_DIR | UDC_EP_SEL;
|
|
if ((UDC_STAT_FLG_REG & UDC_ACK)) {
|
|
ep->ackwait = 0;
|
|
if (!list_empty(&ep->queue)) {
|
|
req = container_of(ep->queue.next,
|
|
struct omap_req, queue);
|
|
(void) write_fifo(ep, req);
|
|
}
|
|
}
|
|
/* min 6 clock delay before clearing EP_SEL ... */
|
|
epn_stat = UDC_EPN_STAT_REG;
|
|
epn_stat = UDC_EPN_STAT_REG;
|
|
UDC_EP_NUM_REG = epnum | UDC_EP_DIR;
|
|
/* then 6 clocks before it'd tx */
|
|
}
|
|
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
return status;
|
|
}
|
|
|
|
#ifdef USE_ISO
|
|
static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
|
|
{
|
|
struct omap_udc *udc = _dev;
|
|
struct omap_ep *ep;
|
|
int pending = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
|
|
/* handle all non-DMA ISO transfers */
|
|
list_for_each_entry (ep, &udc->iso, iso) {
|
|
u16 stat;
|
|
struct omap_req *req;
|
|
|
|
if (ep->has_dma || list_empty(&ep->queue))
|
|
continue;
|
|
req = list_entry(ep->queue.next, struct omap_req, queue);
|
|
|
|
use_ep(ep, UDC_EP_SEL);
|
|
stat = UDC_STAT_FLG_REG;
|
|
|
|
/* NOTE: like the other controller drivers, this isn't
|
|
* currently reporting lost or damaged frames.
|
|
*/
|
|
if (ep->bEndpointAddress & USB_DIR_IN) {
|
|
if (stat & UDC_MISS_IN)
|
|
/* done(ep, req, -EPROTO) */;
|
|
else
|
|
write_fifo(ep, req);
|
|
} else {
|
|
int status = 0;
|
|
|
|
if (stat & UDC_NO_RXPACKET)
|
|
status = -EREMOTEIO;
|
|
else if (stat & UDC_ISO_ERR)
|
|
status = -EILSEQ;
|
|
else if (stat & UDC_DATA_FLUSH)
|
|
status = -ENOSR;
|
|
|
|
if (status)
|
|
/* done(ep, req, status) */;
|
|
else
|
|
read_fifo(ep, req);
|
|
}
|
|
deselect_ep();
|
|
/* 6 wait states before next EP */
|
|
|
|
ep->irqs++;
|
|
if (!list_empty(&ep->queue))
|
|
pending = 1;
|
|
}
|
|
if (!pending)
|
|
UDC_IRQ_EN_REG &= ~UDC_SOF_IE;
|
|
UDC_IRQ_SRC_REG = UDC_SOF;
|
|
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline int machine_without_vbus_sense(void)
|
|
{
|
|
return (machine_is_omap_innovator()
|
|
|| machine_is_omap_osk()
|
|
|| machine_is_omap_apollon()
|
|
#ifndef CONFIG_MACH_OMAP_H4_OTG
|
|
|| machine_is_omap_h4()
|
|
#endif
|
|
|| machine_is_sx1()
|
|
);
|
|
}
|
|
|
|
int usb_gadget_register_driver (struct usb_gadget_driver *driver)
|
|
{
|
|
int status = -ENODEV;
|
|
struct omap_ep *ep;
|
|
unsigned long flags;
|
|
|
|
/* basic sanity tests */
|
|
if (!udc)
|
|
return -ENODEV;
|
|
if (!driver
|
|
// FIXME if otg, check: driver->is_otg
|
|
|| driver->speed < USB_SPEED_FULL
|
|
|| !driver->bind
|
|
|| !driver->setup)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
if (udc->driver) {
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* reset state */
|
|
list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
|
|
ep->irqs = 0;
|
|
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
|
|
continue;
|
|
use_ep(ep, 0);
|
|
UDC_CTRL_REG = UDC_SET_HALT;
|
|
}
|
|
udc->ep0_pending = 0;
|
|
udc->ep[0].irqs = 0;
|
|
udc->softconnect = 1;
|
|
|
|
/* hook up the driver */
|
|
driver->driver.bus = NULL;
|
|
udc->driver = driver;
|
|
udc->gadget.dev.driver = &driver->driver;
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
if (udc->dc_clk != NULL)
|
|
omap_udc_enable_clock(1);
|
|
|
|
status = driver->bind (&udc->gadget);
|
|
if (status) {
|
|
DBG("bind to %s --> %d\n", driver->driver.name, status);
|
|
udc->gadget.dev.driver = NULL;
|
|
udc->driver = NULL;
|
|
goto done;
|
|
}
|
|
DBG("bound to driver %s\n", driver->driver.name);
|
|
|
|
UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK;
|
|
|
|
/* connect to bus through transceiver */
|
|
if (udc->transceiver) {
|
|
status = otg_set_peripheral(udc->transceiver, &udc->gadget);
|
|
if (status < 0) {
|
|
ERR("can't bind to transceiver\n");
|
|
if (driver->unbind) {
|
|
driver->unbind (&udc->gadget);
|
|
udc->gadget.dev.driver = NULL;
|
|
udc->driver = NULL;
|
|
}
|
|
goto done;
|
|
}
|
|
} else {
|
|
if (can_pullup(udc))
|
|
pullup_enable (udc);
|
|
else
|
|
pullup_disable (udc);
|
|
}
|
|
|
|
/* boards that don't have VBUS sensing can't autogate 48MHz;
|
|
* can't enter deep sleep while a gadget driver is active.
|
|
*/
|
|
if (machine_without_vbus_sense())
|
|
omap_vbus_session(&udc->gadget, 1);
|
|
|
|
done:
|
|
if (udc->dc_clk != NULL)
|
|
omap_udc_enable_clock(0);
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL(usb_gadget_register_driver);
|
|
|
|
int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
|
|
{
|
|
unsigned long flags;
|
|
int status = -ENODEV;
|
|
|
|
if (!udc)
|
|
return -ENODEV;
|
|
if (!driver || driver != udc->driver || !driver->unbind)
|
|
return -EINVAL;
|
|
|
|
if (udc->dc_clk != NULL)
|
|
omap_udc_enable_clock(1);
|
|
|
|
if (machine_without_vbus_sense())
|
|
omap_vbus_session(&udc->gadget, 0);
|
|
|
|
if (udc->transceiver)
|
|
(void) otg_set_peripheral(udc->transceiver, NULL);
|
|
else
|
|
pullup_disable(udc);
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
udc_quiesce(udc);
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
driver->unbind(&udc->gadget);
|
|
udc->gadget.dev.driver = NULL;
|
|
udc->driver = NULL;
|
|
|
|
if (udc->dc_clk != NULL)
|
|
omap_udc_enable_clock(0);
|
|
DBG("unregistered driver '%s'\n", driver->driver.name);
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL(usb_gadget_unregister_driver);
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
static const char proc_filename[] = "driver/udc";
|
|
|
|
#define FOURBITS "%s%s%s%s"
|
|
#define EIGHTBITS FOURBITS FOURBITS
|
|
|
|
static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
|
|
{
|
|
u16 stat_flg;
|
|
struct omap_req *req;
|
|
char buf[20];
|
|
|
|
use_ep(ep, 0);
|
|
|
|
if (use_dma && ep->has_dma)
|
|
snprintf(buf, sizeof buf, "(%cxdma%d lch%d) ",
|
|
(ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
|
|
ep->dma_channel - 1, ep->lch);
|
|
else
|
|
buf[0] = 0;
|
|
|
|
stat_flg = UDC_STAT_FLG_REG;
|
|
seq_printf(s,
|
|
"\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
|
|
ep->name, buf,
|
|
ep->double_buf ? "dbuf " : "",
|
|
({char *s; switch(ep->ackwait){
|
|
case 0: s = ""; break;
|
|
case 1: s = "(ackw) "; break;
|
|
case 2: s = "(ackw2) "; break;
|
|
default: s = "(?) "; break;
|
|
} s;}),
|
|
ep->irqs, stat_flg,
|
|
(stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
|
|
(stat_flg & UDC_MISS_IN) ? "miss_in " : "",
|
|
(stat_flg & UDC_DATA_FLUSH) ? "data_flush " : "",
|
|
(stat_flg & UDC_ISO_ERR) ? "iso_err " : "",
|
|
(stat_flg & UDC_ISO_FIFO_EMPTY) ? "iso_fifo_empty " : "",
|
|
(stat_flg & UDC_ISO_FIFO_FULL) ? "iso_fifo_full " : "",
|
|
(stat_flg & UDC_EP_HALTED) ? "HALT " : "",
|
|
(stat_flg & UDC_STALL) ? "STALL " : "",
|
|
(stat_flg & UDC_NAK) ? "NAK " : "",
|
|
(stat_flg & UDC_ACK) ? "ACK " : "",
|
|
(stat_flg & UDC_FIFO_EN) ? "fifo_en " : "",
|
|
(stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
|
|
(stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
|
|
|
|
if (list_empty (&ep->queue))
|
|
seq_printf(s, "\t(queue empty)\n");
|
|
else
|
|
list_for_each_entry (req, &ep->queue, queue) {
|
|
unsigned length = req->req.actual;
|
|
|
|
if (use_dma && buf[0]) {
|
|
length += ((ep->bEndpointAddress & USB_DIR_IN)
|
|
? dma_src_len : dma_dest_len)
|
|
(ep, req->req.dma + length);
|
|
buf[0] = 0;
|
|
}
|
|
seq_printf(s, "\treq %p len %d/%d buf %p\n",
|
|
&req->req, length,
|
|
req->req.length, req->req.buf);
|
|
}
|
|
}
|
|
|
|
static char *trx_mode(unsigned m, int enabled)
|
|
{
|
|
switch (m) {
|
|
case 0: return enabled ? "*6wire" : "unused";
|
|
case 1: return "4wire";
|
|
case 2: return "3wire";
|
|
case 3: return "6wire";
|
|
default: return "unknown";
|
|
}
|
|
}
|
|
|
|
static int proc_otg_show(struct seq_file *s)
|
|
{
|
|
u32 tmp;
|
|
u32 trans;
|
|
char *ctrl_name;
|
|
|
|
tmp = OTG_REV_REG;
|
|
if (cpu_is_omap24xx()) {
|
|
ctrl_name = "control_devconf";
|
|
trans = CONTROL_DEVCONF_REG;
|
|
} else {
|
|
ctrl_name = "tranceiver_ctrl";
|
|
trans = USB_TRANSCEIVER_CTRL_REG;
|
|
}
|
|
seq_printf(s, "\nOTG rev %d.%d, %s %05x\n",
|
|
tmp >> 4, tmp & 0xf, ctrl_name, trans);
|
|
tmp = OTG_SYSCON_1_REG;
|
|
seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
|
|
FOURBITS "\n", tmp,
|
|
trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R),
|
|
trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R),
|
|
(USB0_TRX_MODE(tmp) == 0 && !cpu_is_omap1710())
|
|
? "internal"
|
|
: trx_mode(USB0_TRX_MODE(tmp), 1),
|
|
(tmp & OTG_IDLE_EN) ? " !otg" : "",
|
|
(tmp & HST_IDLE_EN) ? " !host" : "",
|
|
(tmp & DEV_IDLE_EN) ? " !dev" : "",
|
|
(tmp & OTG_RESET_DONE) ? " reset_done" : " reset_active");
|
|
tmp = OTG_SYSCON_2_REG;
|
|
seq_printf(s, "otg_syscon2 %08x%s" EIGHTBITS
|
|
" b_ase_brst=%d hmc=%d\n", tmp,
|
|
(tmp & OTG_EN) ? " otg_en" : "",
|
|
(tmp & USBX_SYNCHRO) ? " synchro" : "",
|
|
// much more SRP stuff
|
|
(tmp & SRP_DATA) ? " srp_data" : "",
|
|
(tmp & SRP_VBUS) ? " srp_vbus" : "",
|
|
(tmp & OTG_PADEN) ? " otg_paden" : "",
|
|
(tmp & HMC_PADEN) ? " hmc_paden" : "",
|
|
(tmp & UHOST_EN) ? " uhost_en" : "",
|
|
(tmp & HMC_TLLSPEED) ? " tllspeed" : "",
|
|
(tmp & HMC_TLLATTACH) ? " tllattach" : "",
|
|
B_ASE_BRST(tmp),
|
|
OTG_HMC(tmp));
|
|
tmp = OTG_CTRL_REG;
|
|
seq_printf(s, "otg_ctrl %06x" EIGHTBITS EIGHTBITS "%s\n", tmp,
|
|
(tmp & OTG_ASESSVLD) ? " asess" : "",
|
|
(tmp & OTG_BSESSEND) ? " bsess_end" : "",
|
|
(tmp & OTG_BSESSVLD) ? " bsess" : "",
|
|
(tmp & OTG_VBUSVLD) ? " vbus" : "",
|
|
(tmp & OTG_ID) ? " id" : "",
|
|
(tmp & OTG_DRIVER_SEL) ? " DEVICE" : " HOST",
|
|
(tmp & OTG_A_SETB_HNPEN) ? " a_setb_hnpen" : "",
|
|
(tmp & OTG_A_BUSREQ) ? " a_bus" : "",
|
|
(tmp & OTG_B_HNPEN) ? " b_hnpen" : "",
|
|
(tmp & OTG_B_BUSREQ) ? " b_bus" : "",
|
|
(tmp & OTG_BUSDROP) ? " busdrop" : "",
|
|
(tmp & OTG_PULLDOWN) ? " down" : "",
|
|
(tmp & OTG_PULLUP) ? " up" : "",
|
|
(tmp & OTG_DRV_VBUS) ? " drv" : "",
|
|
(tmp & OTG_PD_VBUS) ? " pd_vb" : "",
|
|
(tmp & OTG_PU_VBUS) ? " pu_vb" : "",
|
|
(tmp & OTG_PU_ID) ? " pu_id" : ""
|
|
);
|
|
tmp = OTG_IRQ_EN_REG;
|
|
seq_printf(s, "otg_irq_en %04x" "\n", tmp);
|
|
tmp = OTG_IRQ_SRC_REG;
|
|
seq_printf(s, "otg_irq_src %04x" "\n", tmp);
|
|
tmp = OTG_OUTCTRL_REG;
|
|
seq_printf(s, "otg_outctrl %04x" "\n", tmp);
|
|
tmp = OTG_TEST_REG;
|
|
seq_printf(s, "otg_test %04x" "\n", tmp);
|
|
return 0;
|
|
}
|
|
|
|
static int proc_udc_show(struct seq_file *s, void *_)
|
|
{
|
|
u32 tmp;
|
|
struct omap_ep *ep;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
|
|
seq_printf(s, "%s, version: " DRIVER_VERSION
|
|
#ifdef USE_ISO
|
|
" (iso)"
|
|
#endif
|
|
"%s\n",
|
|
driver_desc,
|
|
use_dma ? " (dma)" : "");
|
|
|
|
tmp = UDC_REV_REG & 0xff;
|
|
seq_printf(s,
|
|
"UDC rev %d.%d, fifo mode %d, gadget %s\n"
|
|
"hmc %d, transceiver %s\n",
|
|
tmp >> 4, tmp & 0xf,
|
|
fifo_mode,
|
|
udc->driver ? udc->driver->driver.name : "(none)",
|
|
HMC,
|
|
udc->transceiver
|
|
? udc->transceiver->label
|
|
: ((cpu_is_omap1710() || cpu_is_omap24xx())
|
|
? "external" : "(none)"));
|
|
if (cpu_class_is_omap1()) {
|
|
seq_printf(s, "ULPD control %04x req %04x status %04x\n",
|
|
__REG16(ULPD_CLOCK_CTRL),
|
|
__REG16(ULPD_SOFT_REQ),
|
|
__REG16(ULPD_STATUS_REQ));
|
|
}
|
|
|
|
/* OTG controller registers */
|
|
if (!cpu_is_omap15xx())
|
|
proc_otg_show(s);
|
|
|
|
tmp = UDC_SYSCON1_REG;
|
|
seq_printf(s, "\nsyscon1 %04x" EIGHTBITS "\n", tmp,
|
|
(tmp & UDC_CFG_LOCK) ? " cfg_lock" : "",
|
|
(tmp & UDC_DATA_ENDIAN) ? " data_endian" : "",
|
|
(tmp & UDC_DMA_ENDIAN) ? " dma_endian" : "",
|
|
(tmp & UDC_NAK_EN) ? " nak" : "",
|
|
(tmp & UDC_AUTODECODE_DIS) ? " autodecode_dis" : "",
|
|
(tmp & UDC_SELF_PWR) ? " self_pwr" : "",
|
|
(tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
|
|
(tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
|
|
// syscon2 is write-only
|
|
|
|
/* UDC controller registers */
|
|
if (!(tmp & UDC_PULLUP_EN)) {
|
|
seq_printf(s, "(suspended)\n");
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
tmp = UDC_DEVSTAT_REG;
|
|
seq_printf(s, "devstat %04x" EIGHTBITS "%s%s\n", tmp,
|
|
(tmp & UDC_B_HNP_ENABLE) ? " b_hnp" : "",
|
|
(tmp & UDC_A_HNP_SUPPORT) ? " a_hnp" : "",
|
|
(tmp & UDC_A_ALT_HNP_SUPPORT) ? " a_alt_hnp" : "",
|
|
(tmp & UDC_R_WK_OK) ? " r_wk_ok" : "",
|
|
(tmp & UDC_USB_RESET) ? " usb_reset" : "",
|
|
(tmp & UDC_SUS) ? " SUS" : "",
|
|
(tmp & UDC_CFG) ? " CFG" : "",
|
|
(tmp & UDC_ADD) ? " ADD" : "",
|
|
(tmp & UDC_DEF) ? " DEF" : "",
|
|
(tmp & UDC_ATT) ? " ATT" : "");
|
|
seq_printf(s, "sof %04x\n", UDC_SOF_REG);
|
|
tmp = UDC_IRQ_EN_REG;
|
|
seq_printf(s, "irq_en %04x" FOURBITS "%s\n", tmp,
|
|
(tmp & UDC_SOF_IE) ? " sof" : "",
|
|
(tmp & UDC_EPN_RX_IE) ? " epn_rx" : "",
|
|
(tmp & UDC_EPN_TX_IE) ? " epn_tx" : "",
|
|
(tmp & UDC_DS_CHG_IE) ? " ds_chg" : "",
|
|
(tmp & UDC_EP0_IE) ? " ep0" : "");
|
|
tmp = UDC_IRQ_SRC_REG;
|
|
seq_printf(s, "irq_src %04x" EIGHTBITS "%s%s\n", tmp,
|
|
(tmp & UDC_TXN_DONE) ? " txn_done" : "",
|
|
(tmp & UDC_RXN_CNT) ? " rxn_cnt" : "",
|
|
(tmp & UDC_RXN_EOT) ? " rxn_eot" : "",
|
|
(tmp & UDC_SOF) ? " sof" : "",
|
|
(tmp & UDC_EPN_RX) ? " epn_rx" : "",
|
|
(tmp & UDC_EPN_TX) ? " epn_tx" : "",
|
|
(tmp & UDC_DS_CHG) ? " ds_chg" : "",
|
|
(tmp & UDC_SETUP) ? " setup" : "",
|
|
(tmp & UDC_EP0_RX) ? " ep0out" : "",
|
|
(tmp & UDC_EP0_TX) ? " ep0in" : "");
|
|
if (use_dma) {
|
|
unsigned i;
|
|
|
|
tmp = UDC_DMA_IRQ_EN_REG;
|
|
seq_printf(s, "dma_irq_en %04x%s" EIGHTBITS "\n", tmp,
|
|
(tmp & UDC_TX_DONE_IE(3)) ? " tx2_done" : "",
|
|
(tmp & UDC_RX_CNT_IE(3)) ? " rx2_cnt" : "",
|
|
(tmp & UDC_RX_EOT_IE(3)) ? " rx2_eot" : "",
|
|
|
|
(tmp & UDC_TX_DONE_IE(2)) ? " tx1_done" : "",
|
|
(tmp & UDC_RX_CNT_IE(2)) ? " rx1_cnt" : "",
|
|
(tmp & UDC_RX_EOT_IE(2)) ? " rx1_eot" : "",
|
|
|
|
(tmp & UDC_TX_DONE_IE(1)) ? " tx0_done" : "",
|
|
(tmp & UDC_RX_CNT_IE(1)) ? " rx0_cnt" : "",
|
|
(tmp & UDC_RX_EOT_IE(1)) ? " rx0_eot" : "");
|
|
|
|
tmp = UDC_RXDMA_CFG_REG;
|
|
seq_printf(s, "rxdma_cfg %04x\n", tmp);
|
|
if (tmp) {
|
|
for (i = 0; i < 3; i++) {
|
|
if ((tmp & (0x0f << (i * 4))) == 0)
|
|
continue;
|
|
seq_printf(s, "rxdma[%d] %04x\n", i,
|
|
UDC_RXDMA_REG(i + 1));
|
|
}
|
|
}
|
|
tmp = UDC_TXDMA_CFG_REG;
|
|
seq_printf(s, "txdma_cfg %04x\n", tmp);
|
|
if (tmp) {
|
|
for (i = 0; i < 3; i++) {
|
|
if (!(tmp & (0x0f << (i * 4))))
|
|
continue;
|
|
seq_printf(s, "txdma[%d] %04x\n", i,
|
|
UDC_TXDMA_REG(i + 1));
|
|
}
|
|
}
|
|
}
|
|
|
|
tmp = UDC_DEVSTAT_REG;
|
|
if (tmp & UDC_ATT) {
|
|
proc_ep_show(s, &udc->ep[0]);
|
|
if (tmp & UDC_ADD) {
|
|
list_for_each_entry (ep, &udc->gadget.ep_list,
|
|
ep.ep_list) {
|
|
if (ep->desc)
|
|
proc_ep_show(s, ep);
|
|
}
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int proc_udc_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, proc_udc_show, NULL);
|
|
}
|
|
|
|
static const struct file_operations proc_ops = {
|
|
.open = proc_udc_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void create_proc_file(void)
|
|
{
|
|
struct proc_dir_entry *pde;
|
|
|
|
pde = create_proc_entry (proc_filename, 0, NULL);
|
|
if (pde)
|
|
pde->proc_fops = &proc_ops;
|
|
}
|
|
|
|
static void remove_proc_file(void)
|
|
{
|
|
remove_proc_entry(proc_filename, NULL);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void create_proc_file(void) {}
|
|
static inline void remove_proc_file(void) {}
|
|
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Before this controller can enumerate, we need to pick an endpoint
|
|
* configuration, or "fifo_mode" That involves allocating 2KB of packet
|
|
* buffer space among the endpoints we'll be operating.
|
|
*
|
|
* NOTE: as of OMAP 1710 ES2.0, writing a new endpoint config when
|
|
* UDC_SYSCON_1_REG.CFG_LOCK is set can now work. We won't use that
|
|
* capability yet though.
|
|
*/
|
|
static unsigned __init
|
|
omap_ep_setup(char *name, u8 addr, u8 type,
|
|
unsigned buf, unsigned maxp, int dbuf)
|
|
{
|
|
struct omap_ep *ep;
|
|
u16 epn_rxtx = 0;
|
|
|
|
/* OUT endpoints first, then IN */
|
|
ep = &udc->ep[addr & 0xf];
|
|
if (addr & USB_DIR_IN)
|
|
ep += 16;
|
|
|
|
/* in case of ep init table bugs */
|
|
BUG_ON(ep->name[0]);
|
|
|
|
/* chip setup ... bit values are same for IN, OUT */
|
|
if (type == USB_ENDPOINT_XFER_ISOC) {
|
|
switch (maxp) {
|
|
case 8: epn_rxtx = 0 << 12; break;
|
|
case 16: epn_rxtx = 1 << 12; break;
|
|
case 32: epn_rxtx = 2 << 12; break;
|
|
case 64: epn_rxtx = 3 << 12; break;
|
|
case 128: epn_rxtx = 4 << 12; break;
|
|
case 256: epn_rxtx = 5 << 12; break;
|
|
case 512: epn_rxtx = 6 << 12; break;
|
|
default: BUG();
|
|
}
|
|
epn_rxtx |= UDC_EPN_RX_ISO;
|
|
dbuf = 1;
|
|
} else {
|
|
/* double-buffering "not supported" on 15xx,
|
|
* and ignored for PIO-IN on newer chips
|
|
* (for more reliable behavior)
|
|
*/
|
|
if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx())
|
|
dbuf = 0;
|
|
|
|
switch (maxp) {
|
|
case 8: epn_rxtx = 0 << 12; break;
|
|
case 16: epn_rxtx = 1 << 12; break;
|
|
case 32: epn_rxtx = 2 << 12; break;
|
|
case 64: epn_rxtx = 3 << 12; break;
|
|
default: BUG();
|
|
}
|
|
if (dbuf && addr)
|
|
epn_rxtx |= UDC_EPN_RX_DB;
|
|
init_timer(&ep->timer);
|
|
ep->timer.function = pio_out_timer;
|
|
ep->timer.data = (unsigned long) ep;
|
|
}
|
|
if (addr)
|
|
epn_rxtx |= UDC_EPN_RX_VALID;
|
|
BUG_ON(buf & 0x07);
|
|
epn_rxtx |= buf >> 3;
|
|
|
|
DBG("%s addr %02x rxtx %04x maxp %d%s buf %d\n",
|
|
name, addr, epn_rxtx, maxp, dbuf ? "x2" : "", buf);
|
|
|
|
if (addr & USB_DIR_IN)
|
|
UDC_EP_TX_REG(addr & 0xf) = epn_rxtx;
|
|
else
|
|
UDC_EP_RX_REG(addr) = epn_rxtx;
|
|
|
|
/* next endpoint's buffer starts after this one's */
|
|
buf += maxp;
|
|
if (dbuf)
|
|
buf += maxp;
|
|
BUG_ON(buf > 2048);
|
|
|
|
/* set up driver data structures */
|
|
BUG_ON(strlen(name) >= sizeof ep->name);
|
|
strlcpy(ep->name, name, sizeof ep->name);
|
|
INIT_LIST_HEAD(&ep->queue);
|
|
INIT_LIST_HEAD(&ep->iso);
|
|
ep->bEndpointAddress = addr;
|
|
ep->bmAttributes = type;
|
|
ep->double_buf = dbuf;
|
|
ep->udc = udc;
|
|
|
|
ep->ep.name = ep->name;
|
|
ep->ep.ops = &omap_ep_ops;
|
|
ep->ep.maxpacket = ep->maxpacket = maxp;
|
|
list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list);
|
|
|
|
return buf;
|
|
}
|
|
|
|
static void omap_udc_release(struct device *dev)
|
|
{
|
|
complete(udc->done);
|
|
kfree (udc);
|
|
udc = NULL;
|
|
}
|
|
|
|
static int __init
|
|
omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
|
|
{
|
|
unsigned tmp, buf;
|
|
|
|
/* abolish any previous hardware state */
|
|
UDC_SYSCON1_REG = 0;
|
|
UDC_IRQ_EN_REG = 0;
|
|
UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK;
|
|
UDC_DMA_IRQ_EN_REG = 0;
|
|
UDC_RXDMA_CFG_REG = 0;
|
|
UDC_TXDMA_CFG_REG = 0;
|
|
|
|
/* UDC_PULLUP_EN gates the chip clock */
|
|
// OTG_SYSCON_1_REG |= DEV_IDLE_EN;
|
|
|
|
udc = kzalloc(sizeof(*udc), GFP_KERNEL);
|
|
if (!udc)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init (&udc->lock);
|
|
|
|
udc->gadget.ops = &omap_gadget_ops;
|
|
udc->gadget.ep0 = &udc->ep[0].ep;
|
|
INIT_LIST_HEAD(&udc->gadget.ep_list);
|
|
INIT_LIST_HEAD(&udc->iso);
|
|
udc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
udc->gadget.name = driver_name;
|
|
|
|
device_initialize(&udc->gadget.dev);
|
|
strcpy (udc->gadget.dev.bus_id, "gadget");
|
|
udc->gadget.dev.release = omap_udc_release;
|
|
udc->gadget.dev.parent = &odev->dev;
|
|
if (use_dma)
|
|
udc->gadget.dev.dma_mask = odev->dev.dma_mask;
|
|
|
|
udc->transceiver = xceiv;
|
|
|
|
/* ep0 is special; put it right after the SETUP buffer */
|
|
buf = omap_ep_setup("ep0", 0, USB_ENDPOINT_XFER_CONTROL,
|
|
8 /* after SETUP */, 64 /* maxpacket */, 0);
|
|
list_del_init(&udc->ep[0].ep.ep_list);
|
|
|
|
/* initially disable all non-ep0 endpoints */
|
|
for (tmp = 1; tmp < 15; tmp++) {
|
|
UDC_EP_RX_REG(tmp) = 0;
|
|
UDC_EP_TX_REG(tmp) = 0;
|
|
}
|
|
|
|
#define OMAP_BULK_EP(name,addr) \
|
|
buf = omap_ep_setup(name "-bulk", addr, \
|
|
USB_ENDPOINT_XFER_BULK, buf, 64, 1);
|
|
#define OMAP_INT_EP(name,addr, maxp) \
|
|
buf = omap_ep_setup(name "-int", addr, \
|
|
USB_ENDPOINT_XFER_INT, buf, maxp, 0);
|
|
#define OMAP_ISO_EP(name,addr, maxp) \
|
|
buf = omap_ep_setup(name "-iso", addr, \
|
|
USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
|
|
|
|
switch (fifo_mode) {
|
|
case 0:
|
|
OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
|
|
OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
|
|
OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16);
|
|
break;
|
|
case 1:
|
|
OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
|
|
OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
|
|
OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16);
|
|
|
|
OMAP_BULK_EP("ep3in", USB_DIR_IN | 3);
|
|
OMAP_BULK_EP("ep4out", USB_DIR_OUT | 4);
|
|
OMAP_INT_EP("ep10in", USB_DIR_IN | 10, 16);
|
|
|
|
OMAP_BULK_EP("ep5in", USB_DIR_IN | 5);
|
|
OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
|
|
OMAP_INT_EP("ep11in", USB_DIR_IN | 11, 16);
|
|
|
|
OMAP_BULK_EP("ep6in", USB_DIR_IN | 6);
|
|
OMAP_BULK_EP("ep6out", USB_DIR_OUT | 6);
|
|
OMAP_INT_EP("ep12in", USB_DIR_IN | 12, 16);
|
|
|
|
OMAP_BULK_EP("ep7in", USB_DIR_IN | 7);
|
|
OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
|
|
OMAP_INT_EP("ep13in", USB_DIR_IN | 13, 16);
|
|
OMAP_INT_EP("ep13out", USB_DIR_OUT | 13, 16);
|
|
|
|
OMAP_BULK_EP("ep8in", USB_DIR_IN | 8);
|
|
OMAP_BULK_EP("ep8out", USB_DIR_OUT | 8);
|
|
OMAP_INT_EP("ep14in", USB_DIR_IN | 14, 16);
|
|
OMAP_INT_EP("ep14out", USB_DIR_OUT | 14, 16);
|
|
|
|
OMAP_BULK_EP("ep15in", USB_DIR_IN | 15);
|
|
OMAP_BULK_EP("ep15out", USB_DIR_OUT | 15);
|
|
|
|
break;
|
|
|
|
#ifdef USE_ISO
|
|
case 2: /* mixed iso/bulk */
|
|
OMAP_ISO_EP("ep1in", USB_DIR_IN | 1, 256);
|
|
OMAP_ISO_EP("ep2out", USB_DIR_OUT | 2, 256);
|
|
OMAP_ISO_EP("ep3in", USB_DIR_IN | 3, 128);
|
|
OMAP_ISO_EP("ep4out", USB_DIR_OUT | 4, 128);
|
|
|
|
OMAP_INT_EP("ep5in", USB_DIR_IN | 5, 16);
|
|
|
|
OMAP_BULK_EP("ep6in", USB_DIR_IN | 6);
|
|
OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
|
|
OMAP_INT_EP("ep8in", USB_DIR_IN | 8, 16);
|
|
break;
|
|
case 3: /* mixed bulk/iso */
|
|
OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
|
|
OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
|
|
OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16);
|
|
|
|
OMAP_BULK_EP("ep4in", USB_DIR_IN | 4);
|
|
OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
|
|
OMAP_INT_EP("ep6in", USB_DIR_IN | 6, 16);
|
|
|
|
OMAP_ISO_EP("ep7in", USB_DIR_IN | 7, 256);
|
|
OMAP_ISO_EP("ep8out", USB_DIR_OUT | 8, 256);
|
|
OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16);
|
|
break;
|
|
#endif
|
|
|
|
/* add more modes as needed */
|
|
|
|
default:
|
|
ERR("unsupported fifo_mode #%d\n", fifo_mode);
|
|
return -ENODEV;
|
|
}
|
|
UDC_SYSCON1_REG = UDC_CFG_LOCK|UDC_SELF_PWR;
|
|
INFO("fifo mode %d, %d bytes not used\n", fifo_mode, 2048 - buf);
|
|
return 0;
|
|
}
|
|
|
|
static int __init omap_udc_probe(struct platform_device *pdev)
|
|
{
|
|
int status = -ENODEV;
|
|
int hmc;
|
|
struct otg_transceiver *xceiv = NULL;
|
|
const char *type = NULL;
|
|
struct omap_usb_config *config = pdev->dev.platform_data;
|
|
struct clk *dc_clk;
|
|
struct clk *hhc_clk;
|
|
|
|
/* NOTE: "knows" the order of the resources! */
|
|
if (!request_mem_region(pdev->resource[0].start,
|
|
pdev->resource[0].end - pdev->resource[0].start + 1,
|
|
driver_name)) {
|
|
DBG("request_mem_region failed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (cpu_is_omap16xx()) {
|
|
dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
|
|
hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck");
|
|
BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
|
|
/* can't use omap_udc_enable_clock yet */
|
|
clk_enable(dc_clk);
|
|
clk_enable(hhc_clk);
|
|
udelay(100);
|
|
}
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
dc_clk = clk_get(&pdev->dev, "usb_fck");
|
|
hhc_clk = clk_get(&pdev->dev, "usb_l4_ick");
|
|
BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
|
|
/* can't use omap_udc_enable_clock yet */
|
|
clk_enable(dc_clk);
|
|
clk_enable(hhc_clk);
|
|
udelay(100);
|
|
}
|
|
|
|
INFO("OMAP UDC rev %d.%d%s\n",
|
|
UDC_REV_REG >> 4, UDC_REV_REG & 0xf,
|
|
config->otg ? ", Mini-AB" : "");
|
|
|
|
/* use the mode given to us by board init code */
|
|
if (cpu_is_omap15xx()) {
|
|
hmc = HMC_1510;
|
|
type = "(unknown)";
|
|
|
|
if (machine_without_vbus_sense()) {
|
|
/* just set up software VBUS detect, and then
|
|
* later rig it so we always report VBUS.
|
|
* FIXME without really sensing VBUS, we can't
|
|
* know when to turn PULLUP_EN on/off; and that
|
|
* means we always "need" the 48MHz clock.
|
|
*/
|
|
u32 tmp = FUNC_MUX_CTRL_0_REG;
|
|
|
|
FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
|
|
tmp |= VBUS_MODE_1510;
|
|
tmp &= ~VBUS_CTRL_1510;
|
|
FUNC_MUX_CTRL_0_REG = tmp;
|
|
}
|
|
} else {
|
|
/* The transceiver may package some GPIO logic or handle
|
|
* loopback and/or transceiverless setup; if we find one,
|
|
* use it. Except for OTG, we don't _need_ to talk to one;
|
|
* but not having one probably means no VBUS detection.
|
|
*/
|
|
xceiv = otg_get_transceiver();
|
|
if (xceiv)
|
|
type = xceiv->label;
|
|
else if (config->otg) {
|
|
DBG("OTG requires external transceiver!\n");
|
|
goto cleanup0;
|
|
}
|
|
|
|
hmc = HMC_1610;
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
/* this could be transceiverless in one of the
|
|
* "we don't need to know" modes.
|
|
*/
|
|
type = "external";
|
|
goto known;
|
|
}
|
|
|
|
switch (hmc) {
|
|
case 0: /* POWERUP DEFAULT == 0 */
|
|
case 4:
|
|
case 12:
|
|
case 20:
|
|
if (!cpu_is_omap1710()) {
|
|
type = "integrated";
|
|
break;
|
|
}
|
|
/* FALL THROUGH */
|
|
case 3:
|
|
case 11:
|
|
case 16:
|
|
case 19:
|
|
case 25:
|
|
if (!xceiv) {
|
|
DBG("external transceiver not registered!\n");
|
|
type = "unknown";
|
|
}
|
|
break;
|
|
case 21: /* internal loopback */
|
|
type = "loopback";
|
|
break;
|
|
case 14: /* transceiverless */
|
|
if (cpu_is_omap1710())
|
|
goto bad_on_1710;
|
|
/* FALL THROUGH */
|
|
case 13:
|
|
case 15:
|
|
type = "no";
|
|
break;
|
|
|
|
default:
|
|
bad_on_1710:
|
|
ERR("unrecognized UDC HMC mode %d\n", hmc);
|
|
goto cleanup0;
|
|
}
|
|
}
|
|
known:
|
|
INFO("hmc mode %d, %s transceiver\n", hmc, type);
|
|
|
|
/* a "gadget" abstracts/virtualizes the controller */
|
|
status = omap_udc_setup(pdev, xceiv);
|
|
if (status) {
|
|
goto cleanup0;
|
|
}
|
|
xceiv = NULL;
|
|
// "udc" is now valid
|
|
pullup_disable(udc);
|
|
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
|
udc->gadget.is_otg = (config->otg != 0);
|
|
#endif
|
|
|
|
/* starting with omap1710 es2.0, clear toggle is a separate bit */
|
|
if (UDC_REV_REG >= 0x61)
|
|
udc->clr_halt = UDC_RESET_EP | UDC_CLRDATA_TOGGLE;
|
|
else
|
|
udc->clr_halt = UDC_RESET_EP;
|
|
|
|
/* USB general purpose IRQ: ep0, state changes, dma, etc */
|
|
status = request_irq(pdev->resource[1].start, omap_udc_irq,
|
|
IRQF_SAMPLE_RANDOM, driver_name, udc);
|
|
if (status != 0) {
|
|
ERR("can't get irq %d, err %d\n",
|
|
(int) pdev->resource[1].start, status);
|
|
goto cleanup1;
|
|
}
|
|
|
|
/* USB "non-iso" IRQ (PIO for all but ep0) */
|
|
status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
|
|
IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
|
|
if (status != 0) {
|
|
ERR("can't get irq %d, err %d\n",
|
|
(int) pdev->resource[2].start, status);
|
|
goto cleanup2;
|
|
}
|
|
#ifdef USE_ISO
|
|
status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
|
|
IRQF_DISABLED, "omap_udc iso", udc);
|
|
if (status != 0) {
|
|
ERR("can't get irq %d, err %d\n",
|
|
(int) pdev->resource[3].start, status);
|
|
goto cleanup3;
|
|
}
|
|
#endif
|
|
if (cpu_is_omap16xx()) {
|
|
udc->dc_clk = dc_clk;
|
|
udc->hhc_clk = hhc_clk;
|
|
clk_disable(hhc_clk);
|
|
clk_disable(dc_clk);
|
|
}
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
udc->dc_clk = dc_clk;
|
|
udc->hhc_clk = hhc_clk;
|
|
/* FIXME OMAP2 don't release hhc & dc clock */
|
|
#if 0
|
|
clk_disable(hhc_clk);
|
|
clk_disable(dc_clk);
|
|
#endif
|
|
}
|
|
|
|
create_proc_file();
|
|
status = device_add(&udc->gadget.dev);
|
|
if (!status)
|
|
return status;
|
|
/* If fail, fall through */
|
|
#ifdef USE_ISO
|
|
cleanup3:
|
|
free_irq(pdev->resource[2].start, udc);
|
|
#endif
|
|
|
|
cleanup2:
|
|
free_irq(pdev->resource[1].start, udc);
|
|
|
|
cleanup1:
|
|
kfree (udc);
|
|
udc = NULL;
|
|
|
|
cleanup0:
|
|
if (xceiv)
|
|
put_device(xceiv->dev);
|
|
|
|
if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
|
|
clk_disable(hhc_clk);
|
|
clk_disable(dc_clk);
|
|
clk_put(hhc_clk);
|
|
clk_put(dc_clk);
|
|
}
|
|
|
|
release_mem_region(pdev->resource[0].start,
|
|
pdev->resource[0].end - pdev->resource[0].start + 1);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int __exit omap_udc_remove(struct platform_device *pdev)
|
|
{
|
|
DECLARE_COMPLETION_ONSTACK(done);
|
|
|
|
if (!udc)
|
|
return -ENODEV;
|
|
if (udc->driver)
|
|
return -EBUSY;
|
|
|
|
udc->done = &done;
|
|
|
|
pullup_disable(udc);
|
|
if (udc->transceiver) {
|
|
put_device(udc->transceiver->dev);
|
|
udc->transceiver = NULL;
|
|
}
|
|
UDC_SYSCON1_REG = 0;
|
|
|
|
remove_proc_file();
|
|
|
|
#ifdef USE_ISO
|
|
free_irq(pdev->resource[3].start, udc);
|
|
#endif
|
|
free_irq(pdev->resource[2].start, udc);
|
|
free_irq(pdev->resource[1].start, udc);
|
|
|
|
if (udc->dc_clk) {
|
|
if (udc->clk_requested)
|
|
omap_udc_enable_clock(0);
|
|
clk_put(udc->hhc_clk);
|
|
clk_put(udc->dc_clk);
|
|
}
|
|
|
|
release_mem_region(pdev->resource[0].start,
|
|
pdev->resource[0].end - pdev->resource[0].start + 1);
|
|
|
|
device_unregister(&udc->gadget.dev);
|
|
wait_for_completion(&done);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* suspend/resume/wakeup from sysfs (echo > power/state) or when the
|
|
* system is forced into deep sleep
|
|
*
|
|
* REVISIT we should probably reject suspend requests when there's a host
|
|
* session active, rather than disconnecting, at least on boards that can
|
|
* report VBUS irqs (UDC_DEVSTAT_REG.UDC_ATT). And in any case, we need to
|
|
* make host resumes and VBUS detection trigger OMAP wakeup events; that
|
|
* may involve talking to an external transceiver (e.g. isp1301).
|
|
*/
|
|
|
|
static int omap_udc_suspend(struct platform_device *dev, pm_message_t message)
|
|
{
|
|
u32 devstat;
|
|
|
|
devstat = UDC_DEVSTAT_REG;
|
|
|
|
/* we're requesting 48 MHz clock if the pullup is enabled
|
|
* (== we're attached to the host) and we're not suspended,
|
|
* which would prevent entry to deep sleep...
|
|
*/
|
|
if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) {
|
|
WARN("session active; suspend requires disconnect\n");
|
|
omap_pullup(&udc->gadget, 0);
|
|
}
|
|
|
|
udc->gadget.dev.power.power_state = PMSG_SUSPEND;
|
|
udc->gadget.dev.parent->power.power_state = PMSG_SUSPEND;
|
|
return 0;
|
|
}
|
|
|
|
static int omap_udc_resume(struct platform_device *dev)
|
|
{
|
|
DBG("resume + wakeup/SRP\n");
|
|
omap_pullup(&udc->gadget, 1);
|
|
|
|
/* maybe the host would enumerate us if we nudged it */
|
|
msleep(100);
|
|
return omap_wakeup(&udc->gadget);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct platform_driver udc_driver = {
|
|
.probe = omap_udc_probe,
|
|
.remove = __exit_p(omap_udc_remove),
|
|
.suspend = omap_udc_suspend,
|
|
.resume = omap_udc_resume,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = (char *) driver_name,
|
|
},
|
|
};
|
|
|
|
static int __init udc_init(void)
|
|
{
|
|
INFO("%s, version: " DRIVER_VERSION
|
|
#ifdef USE_ISO
|
|
" (iso)"
|
|
#endif
|
|
"%s\n", driver_desc,
|
|
use_dma ? " (dma)" : "");
|
|
return platform_driver_register(&udc_driver);
|
|
}
|
|
module_init(udc_init);
|
|
|
|
static void __exit udc_exit(void)
|
|
{
|
|
platform_driver_unregister(&udc_driver);
|
|
}
|
|
module_exit(udc_exit);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|