bb44aa09e5
Add support for SAM9X60 WDT into sama5d4_wdt. This means that this driver gets a flag inside the data struct that represents the sam9x60 support. This flag differentiates between the two hardware blocks, and is set according to the compatible of the driver instantiation. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1574067012-18559-3-git-send-email-eugen.hristev@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
62 lines
2.1 KiB
C
62 lines
2.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* drivers/watchdog/at91sam9_wdt.h
|
|
*
|
|
* Copyright (C) 2007 Andrew Victor
|
|
* Copyright (C) 2007 Atmel Corporation.
|
|
* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
|
|
*
|
|
* Watchdog Timer (WDT) - System peripherals regsters.
|
|
* Based on AT91SAM9261 datasheet revision D.
|
|
* Based on SAM9X60 datasheet.
|
|
*
|
|
*/
|
|
|
|
#ifndef AT91_WDT_H
|
|
#define AT91_WDT_H
|
|
|
|
#include <linux/bits.h>
|
|
|
|
#define AT91_WDT_CR 0x00 /* Watchdog Control Register */
|
|
#define AT91_WDT_WDRSTT BIT(0) /* Restart */
|
|
#define AT91_WDT_KEY (0xa5UL << 24) /* KEY Password */
|
|
|
|
#define AT91_WDT_MR 0x04 /* Watchdog Mode Register */
|
|
#define AT91_WDT_WDV (0xfffUL << 0) /* Counter Value */
|
|
#define AT91_WDT_SET_WDV(x) ((x) & AT91_WDT_WDV)
|
|
#define AT91_SAM9X60_PERIODRST BIT(4) /* Period Reset */
|
|
#define AT91_SAM9X60_RPTHRST BIT(5) /* Minimum Restart Period */
|
|
#define AT91_WDT_WDFIEN BIT(12) /* Fault Interrupt Enable */
|
|
#define AT91_SAM9X60_WDDIS BIT(12) /* Watchdog Disable */
|
|
#define AT91_WDT_WDRSTEN BIT(13) /* Reset Processor */
|
|
#define AT91_WDT_WDRPROC BIT(14) /* Timer Restart */
|
|
#define AT91_WDT_WDDIS BIT(15) /* Watchdog Disable */
|
|
#define AT91_WDT_WDD (0xfffUL << 16) /* Delta Value */
|
|
#define AT91_WDT_SET_WDD(x) (((x) << 16) & AT91_WDT_WDD)
|
|
#define AT91_WDT_WDDBGHLT BIT(28) /* Debug Halt */
|
|
#define AT91_WDT_WDIDLEHLT BIT(29) /* Idle Halt */
|
|
|
|
#define AT91_WDT_SR 0x08 /* Watchdog Status Register */
|
|
#define AT91_WDT_WDUNF BIT(0) /* Watchdog Underflow */
|
|
#define AT91_WDT_WDERR BIT(1) /* Watchdog Error */
|
|
|
|
/* Watchdog Timer Value Register */
|
|
#define AT91_SAM9X60_VR 0x08
|
|
|
|
/* Watchdog Window Level Register */
|
|
#define AT91_SAM9X60_WLR 0x0c
|
|
/* Watchdog Period Value */
|
|
#define AT91_SAM9X60_COUNTER (0xfffUL << 0)
|
|
#define AT91_SAM9X60_SET_COUNTER(x) ((x) & AT91_SAM9X60_COUNTER)
|
|
|
|
/* Interrupt Enable Register */
|
|
#define AT91_SAM9X60_IER 0x14
|
|
/* Period Interrupt Enable */
|
|
#define AT91_SAM9X60_PERINT BIT(0)
|
|
/* Interrupt Disable Register */
|
|
#define AT91_SAM9X60_IDR 0x18
|
|
/* Interrupt Status Register */
|
|
#define AT91_SAM9X60_ISR 0x1c
|
|
|
|
#endif
|