![Mauro Carvalho Chehab](/assets/img/avatar_default.png)
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
1927 lines
53 KiB
ReStructuredText
1927 lines
53 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
The bttv driver
|
|
===============
|
|
|
|
Release notes for bttv
|
|
----------------------
|
|
|
|
You'll need at least these config options for bttv:
|
|
|
|
.. code-block:: none
|
|
|
|
CONFIG_I2C=m
|
|
CONFIG_I2C_ALGOBIT=m
|
|
CONFIG_VIDEO_DEV=m
|
|
|
|
The latest bttv version is available from http://bytesex.org/bttv/
|
|
|
|
|
|
Make bttv work with your card
|
|
-----------------------------
|
|
|
|
Just try "modprobe bttv" and see if that works.
|
|
|
|
If it doesn't bttv likely could not autodetect your card and needs some
|
|
insmod options. The most important insmod option for bttv is "card=n"
|
|
to select the correct card type. If you get video but no sound you've
|
|
very likely specified the wrong (or no) card type. A list of supported
|
|
cards is in CARDLIST.bttv
|
|
|
|
If bttv takes very long to load (happens sometimes with the cheap
|
|
cards which have no tuner), try adding this to your modules.conf:
|
|
|
|
.. code-block:: none
|
|
|
|
options i2c-algo-bit bit_test=1
|
|
|
|
For the WinTV/PVR you need one firmware file from the driver CD:
|
|
hcwamc.rbf. The file is in the pvr45xxx.exe archive (self-extracting
|
|
zip file, unzip can unpack it). Put it into the /etc/pvr directory or
|
|
use the firm_altera=<path> insmod option to point the driver to the
|
|
location of the file.
|
|
|
|
If your card isn't listed in CARDLIST.bttv or if you have trouble making
|
|
audio work, you should read the Sound-FAQ.
|
|
|
|
|
|
Autodetecting cards
|
|
-------------------
|
|
|
|
bttv uses the PCI Subsystem ID to autodetect the card type. lspci lists
|
|
the Subsystem ID in the second line, looks like this:
|
|
|
|
.. code-block:: none
|
|
|
|
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
|
|
Subsystem: Hauppauge computer works Inc. WinTV/GO
|
|
Flags: bus master, medium devsel, latency 32, IRQ 5
|
|
Memory at e2000000 (32-bit, prefetchable) [size=4K]
|
|
|
|
only bt878-based cards can have a subsystem ID (which does not mean
|
|
that every card really has one). bt848 cards can't have a Subsystem
|
|
ID and therefore can't be autodetected. There is a list with the ID's
|
|
in bttv-cards.c (in case you are intrested or want to mail patches
|
|
with updates).
|
|
|
|
|
|
Still doesn't work?
|
|
-------------------
|
|
|
|
I do NOT have a lab with 30+ different grabber boards and a
|
|
PAL/NTSC/SECAM test signal generator at home, so I often can't
|
|
reproduce your problems. This makes debugging very difficult for me.
|
|
If you have some knowledge and spare time, please try to fix this
|
|
yourself (patches very welcome of course...) You know: The linux
|
|
slogan is "Do it yourself".
|
|
|
|
There is a mailing list at
|
|
http://vger.kernel.org/vger-lists.html#linux-media
|
|
|
|
If you have trouble with some specific TV card, try to ask there
|
|
instead of mailing me directly. The chance that someone with the
|
|
same card listens there is much higher...
|
|
|
|
For problems with sound: There are a lot of different systems used
|
|
for TV sound all over the world. And there are also different chips
|
|
which decode the audio signal. Reports about sound problems ("stereo
|
|
doesn't work") are pretty useless unless you include some details
|
|
about your hardware and the TV sound scheme used in your country (or
|
|
at least the country you are living in).
|
|
|
|
Modprobe options
|
|
----------------
|
|
|
|
Note: "modinfo <module>" prints various information about a kernel
|
|
module, among them a complete and up-to-date list of insmod options.
|
|
This list tends to be outdated because it is updated manually ...
|
|
|
|
==========================================================================
|
|
|
|
bttv.o
|
|
|
|
.. code-block:: none
|
|
|
|
the bt848/878 (grabber chip) driver
|
|
|
|
insmod args:
|
|
card=n card type, see CARDLIST for a list.
|
|
tuner=n tuner type, see CARDLIST for a list.
|
|
radio=0/1 card supports radio
|
|
pll=0/1/2 pll settings
|
|
0: don't use PLL
|
|
1: 28 MHz crystal installed
|
|
2: 35 MHz crystal installed
|
|
|
|
triton1=0/1 for Triton1 (+others) compatibility
|
|
vsfx=0/1 yet another chipset bug compatibility bit
|
|
see README.quirks for details on these two.
|
|
|
|
bigendian=n Set the endianness of the gfx framebuffer.
|
|
Default is native endian.
|
|
fieldnr=0/1 Count fields. Some TV descrambling software
|
|
needs this, for others it only generates
|
|
50 useless IRQs/sec. default is 0 (off).
|
|
autoload=0/1 autoload helper modules (tuner, audio).
|
|
default is 1 (on).
|
|
bttv_verbose=0/1/2 verbose level (at insmod time, while
|
|
looking at the hardware). default is 1.
|
|
bttv_debug=0/1 debug messages (for capture).
|
|
default is 0 (off).
|
|
irq_debug=0/1 irq handler debug messages.
|
|
default is 0 (off).
|
|
gbuffers=2-32 number of capture buffers for mmap'ed capture.
|
|
default is 4.
|
|
gbufsize= size of capture buffers. default and
|
|
maximum value is 0x208000 (~2MB)
|
|
no_overlay=0 Enable overlay on broken hardware. There
|
|
are some chipsets (SIS for example) which
|
|
are known to have problems with the PCI DMA
|
|
push used by bttv. bttv will disable overlay
|
|
by default on this hardware to avoid crashes.
|
|
With this insmod option you can override this.
|
|
no_overlay=1 Disable overlay. It should be used by broken
|
|
hardware that doesn't support PCI2PCI direct
|
|
transfers.
|
|
automute=0/1 Automatically mutes the sound if there is
|
|
no TV signal, on by default. You might try
|
|
to disable this if you have bad input signal
|
|
quality which leading to unwanted sound
|
|
dropouts.
|
|
chroma_agc=0/1 AGC of chroma signal, off by default.
|
|
adc_crush=0/1 Luminance ADC crush, on by default.
|
|
i2c_udelay= Allow reduce I2C speed. Default is 5 usecs
|
|
(meaning 66,67 Kbps). The default is the
|
|
maximum supported speed by kernel bitbang
|
|
algorithm. You may use lower numbers, if I2C
|
|
messages are lost (16 is known to work on
|
|
all supported cards).
|
|
|
|
bttv_gpio=0/1
|
|
gpiomask=
|
|
audioall=
|
|
audiomux=
|
|
See Sound-FAQ for a detailed description.
|
|
|
|
remap, card, radio and pll accept up to four comma-separated arguments
|
|
(for multiple boards).
|
|
|
|
tuner.o
|
|
|
|
.. code-block:: none
|
|
|
|
The tuner driver. You need this unless you want to use only
|
|
with a camera or external tuner ...
|
|
|
|
insmod args:
|
|
debug=1 print some debug info to the syslog
|
|
type=n type of the tuner chip. n as follows:
|
|
see CARDLIST for a complete list.
|
|
pal=[bdgil] select PAL variant (used for some tuners
|
|
only, important for the audio carrier).
|
|
|
|
tvaudio.o
|
|
|
|
.. code-block:: none
|
|
|
|
new, experimental module which is supported to provide a single
|
|
driver for all simple i2c audio control chips (tda/tea*).
|
|
|
|
insmod args:
|
|
tda8425 = 1 enable/disable the support for the
|
|
tda9840 = 1 various chips.
|
|
tda9850 = 1 The tea6300 can't be autodetected and is
|
|
tda9855 = 1 therefore off by default, if you have
|
|
tda9873 = 1 this one on your card (STB uses these)
|
|
tda9874a = 1 you have to enable it explicitly.
|
|
tea6300 = 0 The two tda985x chips use the same i2c
|
|
tea6420 = 1 address and can't be disturgished from
|
|
pic16c54 = 1 each other, you might have to disable
|
|
the wrong one.
|
|
debug = 1 print debug messages
|
|
|
|
insmod args for tda9874a:
|
|
tda9874a_SIF=1/2 select sound IF input pin (1 or 2)
|
|
(default is pin 1)
|
|
tda9874a_AMSEL=0/1 auto-mute select for NICAM (default=0)
|
|
Please read note 3 below!
|
|
tda9874a_STD=n select TV sound standard (0..8):
|
|
0 - A2, B/G
|
|
1 - A2, M (Korea)
|
|
2 - A2, D/K (1)
|
|
3 - A2, D/K (2)
|
|
4 - A2, D/K (3)
|
|
5 - NICAM, I
|
|
6 - NICAM, B/G
|
|
7 - NICAM, D/K (default)
|
|
8 - NICAM, L
|
|
|
|
Note 1: tda9874a supports both tda9874h (old) and tda9874a (new) chips.
|
|
Note 2: tda9874h/a and tda9875 (which is supported separately by
|
|
tda9875.o) use the same i2c address so both modules should not be
|
|
used at the same time.
|
|
Note 3: Using tda9874a_AMSEL option depends on your TV card design!
|
|
AMSEL=0: auto-mute will switch between NICAM sound
|
|
and the sound on 1st carrier (i.e. FM mono or AM).
|
|
AMSEL=1: auto-mute will switch between NICAM sound
|
|
and the analog mono input (MONOIN pin).
|
|
If tda9874a decoder on your card has MONOIN pin not connected, then
|
|
use only tda9874_AMSEL=0 or don't specify this option at all.
|
|
For example:
|
|
card=65 (FlyVideo 2000S) - set AMSEL=1 or AMSEL=0
|
|
card=72 (Prolink PV-BT878P rev.9B) - set AMSEL=0 only
|
|
|
|
msp3400.o
|
|
|
|
.. code-block:: none
|
|
|
|
The driver for the msp34xx sound processor chips. If you have a
|
|
stereo card, you probably want to insmod this one.
|
|
|
|
insmod args:
|
|
debug=1/2 print some debug info to the syslog,
|
|
2 is more verbose.
|
|
simple=1 Use the "short programming" method. Newer
|
|
msp34xx versions support this. You need this
|
|
for dbx stereo. Default is on if supported by
|
|
the chip.
|
|
once=1 Don't check the TV-stations Audio mode
|
|
every few seconds, but only once after
|
|
channel switches.
|
|
amsound=1 Audio carrier is AM/NICAM at 6.5 Mhz. This
|
|
should improve things for french people, the
|
|
carrier autoscan seems to work with FM only...
|
|
|
|
tea6300.o - OBSOLETE (use tvaudio instead)
|
|
|
|
.. code-block:: none
|
|
|
|
The driver for the tea6300 fader chip. If you have a stereo
|
|
card and the msp3400.o doesn't work, you might want to try this
|
|
one. This chip is seen on most STB TV/FM cards (usually from
|
|
Gateway OEM sold surplus on auction sites).
|
|
|
|
insmod args:
|
|
debug=1 print some debug info to the syslog.
|
|
|
|
tda8425.o - OBSOLETE (use tvaudio instead)
|
|
|
|
.. code-block:: none
|
|
|
|
The driver for the tda8425 fader chip. This driver used to be
|
|
part of bttv.c, so if your sound used to work but does not
|
|
anymore, try loading this module.
|
|
|
|
insmod args:
|
|
debug=1 print some debug info to the syslog.
|
|
|
|
tda985x.o - OBSOLETE (use tvaudio instead)
|
|
|
|
.. code-block:: none
|
|
|
|
The driver for the tda9850/55 audio chips.
|
|
|
|
insmod args:
|
|
debug=1 print some debug info to the syslog.
|
|
chip=9850/9855 set the chip type.
|
|
|
|
|
|
If the box freezes hard with bttv
|
|
---------------------------------
|
|
|
|
It might be a bttv driver bug. It also might be bad hardware. It also
|
|
might be something else ...
|
|
|
|
Just mailing me "bttv freezes" isn't going to help much. This README
|
|
has a few hints how you can help to pin down the problem.
|
|
|
|
|
|
bttv bugs
|
|
~~~~~~~~~
|
|
|
|
If some version works and another doesn't it is likely to be a driver
|
|
bug. It is very helpful if you can tell where exactly it broke
|
|
(i.e. the last working and the first broken version).
|
|
|
|
With a hard freeze you probably doesn't find anything in the logfiles.
|
|
The only way to capture any kernel messages is to hook up a serial
|
|
console and let some terminal application log the messages. /me uses
|
|
screen. See Documentation/admin-guide/serial-console.rst for details on setting
|
|
up a serial console.
|
|
|
|
Read Documentation/admin-guide/bug-hunting.rst to learn how to get any useful
|
|
information out of a register+stack dump printed by the kernel on
|
|
protection faults (so-called "kernel oops").
|
|
|
|
If you run into some kind of deadlock, you can try to dump a call trace
|
|
for each process using sysrq-t (see Documentation/admin-guide/sysrq.rst).
|
|
This way it is possible to figure where *exactly* some process in "D"
|
|
state is stuck.
|
|
|
|
I've seen reports that bttv 0.7.x crashes whereas 0.8.x works rock solid
|
|
for some people. Thus probably a small buglet left somewhere in bttv
|
|
0.7.x. I have no idea where exactly, it works stable for me and a lot of
|
|
other people. But in case you have problems with the 0.7.x versions you
|
|
can give 0.8.x a try ...
|
|
|
|
|
|
hardware bugs
|
|
~~~~~~~~~~~~~
|
|
|
|
Some hardware can't deal with PCI-PCI transfers (i.e. grabber => vga).
|
|
Sometimes problems show up with bttv just because of the high load on
|
|
the PCI bus. The bt848/878 chips have a few workarounds for known
|
|
incompatibilities, see README.quirks.
|
|
|
|
Some folks report that increasing the pci latency helps too,
|
|
althrought I'm not sure whenever this really fixes the problems or
|
|
only makes it less likely to happen. Both bttv and btaudio have a
|
|
insmod option to set the PCI latency of the device.
|
|
|
|
Some mainboard have problems to deal correctly with multiple devices
|
|
doing DMA at the same time. bttv + ide seems to cause this sometimes,
|
|
if this is the case you likely see freezes only with video and hard disk
|
|
access at the same time. Updating the IDE driver to get the latest and
|
|
greatest workarounds for hardware bugs might fix these problems.
|
|
|
|
|
|
other
|
|
~~~~~
|
|
|
|
If you use some binary-only yunk (like nvidia module) try to reproduce
|
|
the problem without.
|
|
|
|
IRQ sharing is known to cause problems in some cases. It works just
|
|
fine in theory and many configurations. Neverless it might be worth a
|
|
try to shuffle around the PCI cards to give bttv another IRQ or make
|
|
it share the IRQ with some other piece of hardware. IRQ sharing with
|
|
VGA cards seems to cause trouble sometimes. I've also seen funny
|
|
effects with bttv sharing the IRQ with the ACPI bridge (and
|
|
apci-enabled kernel).
|
|
|
|
Bttv quirks
|
|
-----------
|
|
|
|
Below is what the bt878 data book says about the PCI bug compatibility
|
|
modes of the bt878 chip.
|
|
|
|
The triton1 insmod option sets the EN_TBFX bit in the control register.
|
|
The vsfx insmod option does the same for EN_VSFX bit. If you have
|
|
stability problems you can try if one of these options makes your box
|
|
work solid.
|
|
|
|
drivers/pci/quirks.c knows about these issues, this way these bits are
|
|
enabled automagically for known-buggy chipsets (look at the kernel
|
|
messages, bttv tells you).
|
|
|
|
Normal PCI Mode
|
|
~~~~~~~~~~~~~~~
|
|
|
|
The PCI REQ signal is the logical-or of the incoming function requests.
|
|
The inter-nal GNT[0:1] signals are gated asynchronously with GNT and
|
|
demultiplexed by the audio request signal. Thus the arbiter defaults to
|
|
the video function at power-up and parks there during no requests for
|
|
bus access. This is desirable since the video will request the bus more
|
|
often. However, the audio will have highest bus access priority. Thus
|
|
the audio will have first access to the bus even when issuing a request
|
|
after the video request but before the PCI external arbiter has granted
|
|
access to the Bt879. Neither function can preempt the other once on the
|
|
bus. The duration to empty the entire video PCI FIFO onto the PCI bus is
|
|
very short compared to the bus access latency the audio PCI FIFO can
|
|
tolerate.
|
|
|
|
|
|
430FX Compatibility Mode
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
When using the 430FX PCI, the following rules will ensure
|
|
compatibility:
|
|
|
|
(1) Deassert REQ at the same time as asserting FRAME.
|
|
(2) Do not reassert REQ to request another bus transaction until after
|
|
finish-ing the previous transaction.
|
|
|
|
Since the individual bus masters do not have direct control of REQ, a
|
|
simple logical-or of video and audio requests would violate the rules.
|
|
Thus, both the arbiter and the initiator contain 430FX compatibility
|
|
mode logic. To enable 430FX mode, set the EN_TBFX bit as indicated in
|
|
Device Control Register on page 104.
|
|
|
|
When EN_TBFX is enabled, the arbiter ensures that the two compatibility
|
|
rules are satisfied. Before GNT is asserted by the PCI arbiter, this
|
|
internal arbiter may still logical-or the two requests. However, once
|
|
the GNT is issued, this arbiter must lock in its decision and now route
|
|
only the granted request to the REQ pin. The arbiter decision lock
|
|
happens regardless of the state of FRAME because it does not know when
|
|
FRAME will be asserted (typically - each initiator will assert FRAME on
|
|
the cycle following GNT). When FRAME is asserted, it is the initiator s
|
|
responsibility to remove its request at the same time. It is the
|
|
arbiters responsibility to allow this request to flow through to REQ and
|
|
not allow the other request to hold REQ asserted. The decision lock may
|
|
be removed at the end of the transaction: for example, when the bus is
|
|
idle (FRAME and IRDY). The arbiter decision may then continue
|
|
asynchronously until GNT is again asserted.
|
|
|
|
|
|
Interfacing with Non-PCI 2.1 Compliant Core Logic
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
A small percentage of core logic devices may start a bus transaction
|
|
during the same cycle that GNT is de-asserted. This is non PCI 2.1
|
|
compliant. To ensure compatibility when using PCs with these PCI
|
|
controllers, the EN_VSFX bit must be enabled (refer to Device Control
|
|
Register on page 104). When in this mode, the arbiter does not pass GNT
|
|
to the internal functions unless REQ is asserted. This prevents a bus
|
|
transaction from starting the same cycle as GNT is de-asserted. This
|
|
also has the side effect of not being able to take advantage of bus
|
|
parking, thus lowering arbitration performance. The Bt879 drivers must
|
|
query for these non-compliant devices, and set the EN_VSFX bit only if
|
|
required.
|
|
|
|
bttv and sound mini howto
|
|
-------------------------
|
|
|
|
There are a lot of different bt848/849/878/879 based boards available.
|
|
Making video work often is not a big deal, because this is handled
|
|
completely by the bt8xx chip, which is common on all boards. But
|
|
sound is handled in slightly different ways on each board.
|
|
|
|
To handle the grabber boards correctly, there is a array tvcards[] in
|
|
bttv-cards.c, which holds the information required for each board.
|
|
Sound will work only, if the correct entry is used (for video it often
|
|
makes no difference). The bttv driver prints a line to the kernel
|
|
log, telling which card type is used. Like this one:
|
|
|
|
.. code-block:: none
|
|
|
|
bttv0: model: BT848(Hauppauge old) [autodetected]
|
|
|
|
You should verify this is correct. If it isn't, you have to pass the
|
|
correct board type as insmod argument, "insmod bttv card=2" for
|
|
example. The file CARDLIST has a list of valid arguments for card.
|
|
If your card isn't listed there, you might check the source code for
|
|
new entries which are not listed yet. If there isn't one for your
|
|
card, you can check if one of the existing entries does work for you
|
|
(just trial and error...).
|
|
|
|
Some boards have an extra processor for sound to do stereo decoding
|
|
and other nice features. The msp34xx chips are used by Hauppauge for
|
|
example. If your board has one, you might have to load a helper
|
|
module like msp3400.o to make sound work. If there isn't one for the
|
|
chip used on your board: Bad luck. Start writing a new one. Well,
|
|
you might want to check the video4linux mailing list archive first...
|
|
|
|
Of course you need a correctly installed soundcard unless you have the
|
|
speakers connected directly to the grabber board. Hint: check the
|
|
mixer settings too. ALSA for example has everything muted by default.
|
|
|
|
|
|
How sound works in detail
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Still doesn't work? Looks like some driver hacking is required.
|
|
Below is a do-it-yourself description for you.
|
|
|
|
The bt8xx chips have 32 general purpose pins, and registers to control
|
|
these pins. One register is the output enable register
|
|
(BT848_GPIO_OUT_EN), it says which pins are actively driven by the
|
|
bt848 chip. Another one is the data register (BT848_GPIO_DATA), where
|
|
you can get/set the status if these pins. They can be used for input
|
|
and output.
|
|
|
|
Most grabber board vendors use these pins to control an external chip
|
|
which does the sound routing. But every board is a little different.
|
|
These pins are also used by some companies to drive remote control
|
|
receiver chips. Some boards use the i2c bus instead of the gpio pins
|
|
to connect the mux chip.
|
|
|
|
As mentioned above, there is a array which holds the required
|
|
information for each known board. You basically have to create a new
|
|
line for your board. The important fields are these two:
|
|
|
|
.. code-block:: c
|
|
|
|
struct tvcard
|
|
{
|
|
[ ... ]
|
|
u32 gpiomask;
|
|
u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */
|
|
};
|
|
|
|
gpiomask specifies which pins are used to control the audio mux chip.
|
|
The corresponding bits in the output enable register
|
|
(BT848_GPIO_OUT_EN) will be set as these pins must be driven by the
|
|
bt848 chip.
|
|
|
|
The audiomux\[\] array holds the data values for the different inputs
|
|
(i.e. which pins must be high/low for tuner/mute/...). This will be
|
|
written to the data register (BT848_GPIO_DATA) to switch the audio
|
|
mux.
|
|
|
|
|
|
What you have to do is figure out the correct values for gpiomask and
|
|
the audiomux array. If you have Windows and the drivers four your
|
|
card installed, you might to check out if you can read these registers
|
|
values used by the windows driver. A tool to do this is available
|
|
from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
|
|
doesn't work with bt878 boards according to some reports I received.
|
|
Another one with bt878 support is available from
|
|
http://btwincap.sourceforge.net/Files/btspy2.00.zip
|
|
|
|
You might also dig around in the \*.ini files of the Windows applications.
|
|
You can have a look at the board to see which of the gpio pins are
|
|
connected at all and then start trial-and-error ...
|
|
|
|
|
|
Starting with release 0.7.41 bttv has a number of insmod options to
|
|
make the gpio debugging easier:
|
|
|
|
.. code-block:: none
|
|
|
|
bttv_gpio=0/1 enable/disable gpio debug messages
|
|
gpiomask=n set the gpiomask value
|
|
audiomux=i,j,... set the values of the audiomux array
|
|
audioall=a set the values of the audiomux array (one
|
|
value for all array elements, useful to check
|
|
out which effect the particular value has).
|
|
|
|
The messages printed with bttv_gpio=1 look like this:
|
|
|
|
.. code-block:: none
|
|
|
|
bttv0: gpio: en=00000027, out=00000024 in=00ffffd8 [audio: off]
|
|
|
|
en = output _en_able register (BT848_GPIO_OUT_EN)
|
|
out = _out_put bits of the data register (BT848_GPIO_DATA),
|
|
i.e. BT848_GPIO_DATA & BT848_GPIO_OUT_EN
|
|
in = _in_put bits of the data register,
|
|
i.e. BT848_GPIO_DATA & ~BT848_GPIO_OUT_EN
|
|
|
|
|
|
|
|
Other elements of the tvcards array
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
If you are trying to make a new card work you might find it useful to
|
|
know what the other elements in the tvcards array are good for:
|
|
|
|
.. code-block:: none
|
|
|
|
video_inputs - # of video inputs the card has
|
|
audio_inputs - historical cruft, not used any more.
|
|
tuner - which input is the tuner
|
|
svhs - which input is svhs (all others are labeled composite)
|
|
muxsel - video mux, input->registervalue mapping
|
|
pll - same as pll= insmod option
|
|
tuner_type - same as tuner= insmod option
|
|
*_modulename - hint whenever some card needs this or that audio
|
|
module loaded to work properly.
|
|
has_radio - whenever this TV card has a radio tuner.
|
|
no_msp34xx - "1" disables loading of msp3400.o module
|
|
no_tda9875 - "1" disables loading of tda9875.o module
|
|
needs_tvaudio - set to "1" to load tvaudio.o module
|
|
|
|
If some config item is specified both from the tvcards array and as
|
|
insmod option, the insmod option takes precedence.
|
|
|
|
Cards
|
|
-----
|
|
|
|
.. note::
|
|
|
|
For a more updated list, please check
|
|
https://linuxtv.org/wiki/index.php/Hardware_Device_Information
|
|
|
|
Supported cards: Bt848/Bt848a/Bt849/Bt878/Bt879 cards
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
All cards with Bt848/Bt848a/Bt849/Bt878/Bt879 and normal
|
|
Composite/S-VHS inputs are supported. Teletext and Intercast support
|
|
(PAL only) for ALL cards via VBI sample decoding in software.
|
|
|
|
Some cards with additional multiplexing of inputs or other additional
|
|
fancy chips are only partially supported (unless specifications by the
|
|
card manufacturer are given). When a card is listed here it isn't
|
|
necessarily fully supported.
|
|
|
|
All other cards only differ by additional components as tuners, sound
|
|
decoders, EEPROMs, teletext decoders ...
|
|
|
|
|
|
MATRIX Vision
|
|
~~~~~~~~~~~~~
|
|
|
|
MV-Delta
|
|
- Bt848A
|
|
- 4 Composite inputs, 1 S-VHS input (shared with 4th composite)
|
|
- EEPROM
|
|
|
|
http://www.matrix-vision.de/
|
|
|
|
This card has no tuner but supports all 4 composite (1 shared with an
|
|
S-VHS input) of the Bt848A.
|
|
Very nice card if you only have satellite TV but several tuners connected
|
|
to the card via composite.
|
|
|
|
Many thanks to Matrix-Vision for giving us 2 cards for free which made
|
|
Bt848a/Bt849 single crystal operation support possible!!!
|
|
|
|
|
|
|
|
Miro/Pinnacle PCTV
|
|
~~~~~~~~~~~~~~~~~~
|
|
|
|
- Bt848
|
|
some (all??) come with 2 crystals for PAL/SECAM and NTSC
|
|
- PAL, SECAM or NTSC TV tuner (Philips or TEMIC)
|
|
- MSP34xx sound decoder on add on board
|
|
decoder is supported but AFAIK does not yet work
|
|
(other sound MUX setting in GPIO port needed??? somebody who fixed this???)
|
|
- 1 tuner, 1 composite and 1 S-VHS input
|
|
- tuner type is autodetected
|
|
|
|
http://www.miro.de/
|
|
http://www.miro.com/
|
|
|
|
|
|
Many thanks for the free card which made first NTSC support possible back
|
|
in 1997!
|
|
|
|
|
|
Hauppauge Win/TV pci
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
|
|
There are many different versions of the Hauppauge cards with different
|
|
tuners (TV+Radio ...), teletext decoders.
|
|
Note that even cards with same model numbers have (depending on the revision)
|
|
different chips on it.
|
|
|
|
- Bt848 (and others but always in 2 crystal operation???)
|
|
newer cards have a Bt878
|
|
|
|
- PAL, SECAM, NTSC or tuner with or without Radio support
|
|
|
|
e.g.:
|
|
|
|
- PAL:
|
|
|
|
- TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
|
|
- TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
|
|
|
|
- NTSC:
|
|
|
|
- TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
|
|
- TSA5518: no datasheet available on Philips site
|
|
|
|
- Philips SAA5246 or SAA5284 ( or no) Teletext decoder chip
|
|
with buffer RAM (e.g. Winbond W24257AS-35: 32Kx8 CMOS static RAM)
|
|
SAA5246 (I2C 0x22) is supported
|
|
|
|
- 256 bytes EEPROM: Microchip 24LC02B or Philips 8582E2Y
|
|
with configuration information
|
|
I2C address 0xa0 (24LC02B also responds to 0xa2-0xaf)
|
|
|
|
- 1 tuner, 1 composite and (depending on model) 1 S-VHS input
|
|
|
|
- 14052B: mux for selection of sound source
|
|
|
|
- sound decoder: TDA9800, MSP34xx (stereo cards)
|
|
|
|
|
|
Askey CPH-Series
|
|
~~~~~~~~~~~~~~~~
|
|
Developed by TelSignal(?), OEMed by many vendors (Typhoon, Anubis, Dynalink)
|
|
|
|
- Card series:
|
|
- CPH01x: BT848 capture only
|
|
- CPH03x: BT848
|
|
- CPH05x: BT878 with FM
|
|
- CPH06x: BT878 (w/o FM)
|
|
- CPH07x: BT878 capture only
|
|
|
|
- TV standards:
|
|
- CPH0x0: NTSC-M/M
|
|
- CPH0x1: PAL-B/G
|
|
- CPH0x2: PAL-I/I
|
|
- CPH0x3: PAL-D/K
|
|
- CPH0x4: SECAM-L/L
|
|
- CPH0x5: SECAM-B/G
|
|
- CPH0x6: SECAM-D/K
|
|
- CPH0x7: PAL-N/N
|
|
- CPH0x8: PAL-B/H
|
|
- CPH0x9: PAL-M/M
|
|
|
|
- CPH03x was often sold as "TV capturer".
|
|
|
|
Identifying:
|
|
|
|
#) 878 cards can be identified by PCI Subsystem-ID:
|
|
- 144f:3000 = CPH06x
|
|
- 144F:3002 = CPH05x w/ FM
|
|
- 144F:3005 = CPH06x_LC (w/o remote control)
|
|
#) The cards have a sticker with "CPH"-model on the back.
|
|
#) These cards have a number printed on the PCB just above the tuner metal box:
|
|
- "80-CP2000300-x" = CPH03X
|
|
- "80-CP2000500-x" = CPH05X
|
|
- "80-CP2000600-x" = CPH06X / CPH06x_LC
|
|
|
|
Askey sells these cards as "Magic TView series", Brand "MagicXpress".
|
|
Other OEM often call these "Tview", "TView99" or else.
|
|
|
|
Lifeview Flyvideo Series:
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The naming of these series differs in time and space.
|
|
|
|
Identifying:
|
|
#) Some models can be identified by PCI subsystem ID:
|
|
|
|
- 1852:1852 = Flyvideo 98 FM
|
|
- 1851:1850 = Flyvideo 98
|
|
- 1851:1851 = Flyvideo 98 EZ (capture only)
|
|
|
|
#) There is a print on the PCB:
|
|
|
|
- LR25 = Flyvideo (Zoran ZR36120, SAA7110A)
|
|
- LR26 Rev.N = Flyvideo II (Bt848)
|
|
- LR26 Rev.O = Flyvideo II (Bt878)
|
|
- LR37 Rev.C = Flyvideo EZ (Capture only, ZR36120 + SAA7110)
|
|
- LR38 Rev.A1= Flyvideo II EZ (Bt848 capture only)
|
|
- LR50 Rev.Q = Flyvideo 98 (w/eeprom and PCI subsystem ID)
|
|
- LR50 Rev.W = Flyvideo 98 (no eeprom)
|
|
- LR51 Rev.E = Flyvideo 98 EZ (capture only)
|
|
- LR90 = Flyvideo 2000 (Bt878)
|
|
- LR90 Flyvideo 2000S (Bt878) w/Stereo TV (Package incl. LR91 daughterboard)
|
|
- LR91 = Stereo daughter card for LR90
|
|
- LR97 = Flyvideo DVBS
|
|
- LR99 Rev.E = Low profile card for OEM integration (only internal audio!) bt878
|
|
- LR136 = Flyvideo 2100/3100 (Low profile, SAA7130/SAA7134)
|
|
- LR137 = Flyvideo DV2000/DV3000 (SAA7130/SAA7134 + IEEE1394)
|
|
- LR138 Rev.C= Flyvideo 2000 (SAA7130)
|
|
- LR138 Flyvideo 3000 (SAA7134) w/Stereo TV
|
|
|
|
- These exist in variations w/FM and w/Remote sometimes denoted
|
|
by suffixes "FM" and "R".
|
|
|
|
#) You have a laptop (miniPCI card):
|
|
|
|
- Product = FlyTV Platinum Mini
|
|
- Model/Chip = LR212/saa7135
|
|
|
|
- Lifeview.com.tw states (Feb. 2002):
|
|
"The FlyVideo2000 and FlyVideo2000s product name have renamed to FlyVideo98."
|
|
Their Bt8x8 cards are listed as discontinued.
|
|
- Flyvideo 2000S was probably sold as Flyvideo 3000 in some countries(Europe?).
|
|
The new Flyvideo 2000/3000 are SAA7130/SAA7134 based.
|
|
|
|
"Flyvideo II" had been the name for the 848 cards, nowadays (in Germany)
|
|
this name is re-used for LR50 Rev.W.
|
|
|
|
The Lifeview website mentioned Flyvideo III at some time, but such a card
|
|
has not yet been seen (perhaps it was the german name for LR90 [stereo]).
|
|
These cards are sold by many OEMs too.
|
|
|
|
FlyVideo A2 (Elta 8680)= LR90 Rev.F (w/Remote, w/o FM, stereo TV by tda9821) {Germany}
|
|
|
|
Lifeview 3000 (Elta 8681) as sold by Plus(April 2002), Germany = LR138 w/ saa7134
|
|
|
|
lifeview config coding on gpio pins 0-9
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
- LR50 rev. Q ("PARTS: 7031505116), Tuner wurde als Nr. 5 erkannt, Eingänge
|
|
SVideo, TV, Composite, Audio, Remote:
|
|
|
|
- CP9..1=100001001 (1: 0-Ohm-Widerstand gegen GND unbestückt; 0: bestückt)
|
|
|
|
|
|
Typhoon TV card series:
|
|
~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
These can be CPH, Flyvideo, Pixelview or KNC1 series.
|
|
Typhoon is the brand of Anubis.
|
|
Model 50680 got re-used, some model no. had different contents over time.
|
|
|
|
Models:
|
|
|
|
- 50680 "TV Tuner PCI Pal BG"(old,red package)=can be CPH03x(bt848) or CPH06x(bt878)
|
|
- 50680 "TV Tuner Pal BG" (blue package)= Pixelview PV-BT878P+ (Rev 9B)
|
|
- 50681 "TV Tuner PCI Pal I" (variant of 50680)
|
|
- 50682 "TView TV/FM Tuner Pal BG" = Flyvideo 98FM (LR50 Rev.Q)
|
|
|
|
.. note::
|
|
|
|
The package has a picture of CPH05x (which would be a real TView)
|
|
|
|
- 50683 "TV Tuner PCI SECAM" (variant of 50680)
|
|
- 50684 "TV Tuner Pal BG" = Pixelview 878TV(Rev.3D)
|
|
- 50686 "TV Tuner" = KNC1 TV Station
|
|
- 50687 "TV Tuner stereo" = KNC1 TV Station pro
|
|
- 50688 "TV Tuner RDS" (black package) = KNC1 TV Station RDS
|
|
- 50689 TV SAT DVB-S CARD CI PCI (SAA7146AH, SU1278?) = "KNC1 TV Station DVB-S"
|
|
- 50692 "TV/FM Tuner" (small PCB)
|
|
- 50694 TV TUNER CARD RDS (PHILIPS CHIPSET SAA7134HL)
|
|
- 50696 TV TUNER STEREO (PHILIPS CHIPSET SAA7134HL, MK3ME Tuner)
|
|
- 50804 PC-SAT TV/Audio Karte = Techni-PC-Sat (ZORAN 36120PQC, Tuner:Alps)
|
|
- 50866 TVIEW SAT RECEIVER+ADR
|
|
- 50868 "TV/FM Tuner Pal I" (variant of 50682)
|
|
- 50999 "TV/FM Tuner Secam" (variant of 50682)
|
|
|
|
Guillemot
|
|
~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Maxi-TV PCI (ZR36120)
|
|
- Maxi TV Video 2 = LR50 Rev.Q (FI1216MF, PAL BG+SECAM)
|
|
- Maxi TV Video 3 = CPH064 (PAL BG + SECAM)
|
|
|
|
Mentor
|
|
~~~~~~
|
|
|
|
Mentor TV card ("55-878TV-U1") = Pixelview 878TV(Rev.3F) (w/FM w/Remote)
|
|
|
|
Prolink
|
|
~~~~~~~
|
|
|
|
- TV cards:
|
|
|
|
- PixelView Play TV pro - (Model: PV-BT878P+ REV 8E)
|
|
- PixelView Play TV pro - (Model: PV-BT878P+ REV 9D)
|
|
- PixelView Play TV pro - (Model: PV-BT878P+ REV 4C / 8D / 10A )
|
|
- PixelView Play TV - (Model: PV-BT848P+)
|
|
- 878TV - (Model: PV-BT878TV)
|
|
|
|
- Multimedia TV packages (card + software pack):
|
|
|
|
- PixelView Play TV Theater - (Model: PV-M4200) = PixelView Play TV pro + Software
|
|
- PixelView Play TV PAK - (Model: PV-BT878P+ REV 4E)
|
|
- PixelView Play TV/VCR - (Model: PV-M3200 REV 4C / 8D / 10A )
|
|
- PixelView Studio PAK - (Model: M2200 REV 4C / 8D / 10A )
|
|
- PixelView PowerStudio PAK - (Model: PV-M3600 REV 4E)
|
|
- PixelView DigitalVCR PAK - (Model: PV-M2400 REV 4C / 8D / 10A )
|
|
- PixelView PlayTV PAK II (TV/FM card + usb camera) PV-M3800
|
|
- PixelView PlayTV XP PV-M4700,PV-M4700(w/FM)
|
|
- PixelView PlayTV DVR PV-M4600 package contents:PixelView PlayTV pro, windvr & videoMail s/w
|
|
|
|
- Further Cards:
|
|
|
|
- PV-BT878P+rev.9B (Play TV Pro, opt. w/FM w/NICAM)
|
|
- PV-BT878P+rev.2F
|
|
- PV-BT878P Rev.1D (bt878, capture only)
|
|
|
|
- XCapture PV-CX881P (cx23881)
|
|
- PlayTV HD PV-CX881PL+, PV-CX881PL+(w/FM) (cx23881)
|
|
|
|
- DTV3000 PV-DTV3000P+ DVB-S CI = Twinhan VP-1030
|
|
- DTV2000 DVB-S = Twinhan VP-1020
|
|
|
|
- Video Conferencing:
|
|
|
|
- PixelView Meeting PAK - (Model: PV-BT878P)
|
|
- PixelView Meeting PAK Lite - (Model: PV-BT878P)
|
|
- PixelView Meeting PAK plus - (Model: PV-BT878P+rev 4C/8D/10A)
|
|
- PixelView Capture - (Model: PV-BT848P)
|
|
- PixelView PlayTV USB pro
|
|
- Model No. PV-NT1004+, PV-NT1004+ (w/FM) = NT1004 USB decoder chip + SAA7113 video decoder chip
|
|
|
|
Dynalink
|
|
~~~~~~~~
|
|
|
|
These are CPH series.
|
|
|
|
Phoebemicro
|
|
~~~~~~~~~~~
|
|
|
|
- TV Master = CPH030 or CPH060
|
|
- TV Master FM = CPH050
|
|
|
|
Genius/Kye
|
|
~~~~~~~~~~
|
|
|
|
- Video Wonder/Genius Internet Video Kit = LR37 Rev.C
|
|
- Video Wonder Pro II (848 or 878) = LR26
|
|
|
|
Tekram
|
|
~~~~~~
|
|
|
|
- VideoCap C205 (Bt848)
|
|
- VideoCap C210 (zr36120 +Philips)
|
|
- CaptureTV M200 (ISA)
|
|
- CaptureTV M205 (Bt848)
|
|
|
|
Lucky Star
|
|
~~~~~~~~~~
|
|
|
|
- Image World Conference TV = LR50 Rev. Q
|
|
|
|
Leadtek
|
|
~~~~~~~
|
|
|
|
- WinView 601 (Bt848)
|
|
- WinView 610 (Zoran)
|
|
- WinFast2000
|
|
- WinFast2000 XP
|
|
|
|
Support for the Leadtek WinView 601 TV/FM
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Author of this section: Jon Tombs <jon@gte.esi.us.es>
|
|
|
|
This card is basically the same as all the rest (Bt484A, Philips tuner),
|
|
the main difference is that they have attached a programmable attenuator to 3
|
|
GPIO lines in order to give some volume control. They have also stuck an
|
|
infra-red remote control decoded on the board, I will add support for this
|
|
when I get time (it simple generates an interrupt for each key press, with
|
|
the key code is placed in the GPIO port).
|
|
|
|
I don't yet have any application to test the radio support. The tuner
|
|
frequency setting should work but it is possible that the audio multiplexer
|
|
is wrong. If it doesn't work, send me email.
|
|
|
|
|
|
- No Thanks to Leadtek they refused to answer any questions about their
|
|
hardware. The driver was written by visual inspection of the card. If you
|
|
use this driver, send an email insult to them, and tell them you won't
|
|
continue buying their hardware unless they support Linux.
|
|
|
|
- Little thanks to Princeton Technology Corp (http://www.princeton.com.tw)
|
|
who make the audio attenuator. Their publicly available data-sheet available
|
|
on their web site doesn't include the chip programming information! Hidden
|
|
on their server are the full data-sheets, but don't ask how I found it.
|
|
|
|
To use the driver I use the following options, the tuner and pll settings might
|
|
be different in your country
|
|
|
|
insmod videodev
|
|
insmod i2c scan=1 i2c_debug=0 verbose=0
|
|
insmod tuner type=1 debug=0
|
|
insmod bttv pll=1 radio=1 card=17
|
|
|
|
|
|
KNC One
|
|
~~~~~~~
|
|
|
|
- TV-Station
|
|
- TV-Station SE (+Software Bundle)
|
|
- TV-Station pro (+TV stereo)
|
|
- TV-Station FM (+Radio)
|
|
- TV-Station RDS (+RDS)
|
|
- TV Station SAT (analog satellite)
|
|
- TV-Station DVB-S
|
|
|
|
.. note:: newer Cards have saa7134, but model name stayed the same?
|
|
|
|
Provideo
|
|
~~~~~~~~
|
|
|
|
- PV951 or PV-951 (also are sold as:
|
|
Boeder TV-FM Video Capture Card,
|
|
Titanmedia Supervision TV-2400,
|
|
Provideo PV951 TF,
|
|
3DeMon PV951,
|
|
MediaForte TV-Vision PV951,
|
|
Yoko PV951,
|
|
Vivanco Tuner Card PCI Art.-Nr.: 68404,
|
|
) now named PV-951T
|
|
|
|
- Surveillance Series:
|
|
|
|
- PV-141
|
|
- PV-143
|
|
- PV-147
|
|
- PV-148 (capture only)
|
|
- PV-150
|
|
- PV-151
|
|
|
|
- TV-FM Tuner Series:
|
|
|
|
- PV-951TDV (tv tuner + 1394)
|
|
- PV-951T/TF
|
|
- PV-951PT/TF
|
|
- PV-956T/TF Low Profile
|
|
- PV-911
|
|
|
|
Highscreen
|
|
~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- TV Karte = LR50 Rev.S
|
|
- TV-Boostar = Terratec Terra TV+ Version 1.0 (Bt848, tda9821) "ceb105.pcb"
|
|
|
|
Zoltrix
|
|
~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Face to Face Capture (Bt848 capture only) (PCB "VP-2848")
|
|
- Face To Face TV MAX (Bt848) (PCB "VP-8482 Rev1.3")
|
|
- Genie TV (Bt878) (PCB "VP-8790 Rev 2.1")
|
|
- Genie Wonder Pro
|
|
|
|
AVerMedia
|
|
~~~~~~~~~
|
|
|
|
- AVer FunTV Lite (ISA, AV3001 chipset) "M101.C"
|
|
- AVerTV
|
|
- AVerTV Stereo
|
|
- AVerTV Studio (w/FM)
|
|
- AVerMedia TV98 with Remote
|
|
- AVerMedia TV/FM98 Stereo
|
|
- AVerMedia TVCAM98
|
|
- TVCapture (Bt848)
|
|
- TVPhone (Bt848)
|
|
- TVCapture98 (="AVerMedia TV98" in USA) (Bt878)
|
|
- TVPhone98 (Bt878, w/FM)
|
|
|
|
======== =========== =============== ======= ====== ======== =======================
|
|
PCB PCI-ID Model-Name Eeprom Tuner Sound Country
|
|
======== =========== =============== ======= ====== ======== =======================
|
|
M101.C ISA !
|
|
M108-B Bt848 -- FR1236 US [#f2]_, [#f3]_
|
|
M1A8-A Bt848 AVer TV-Phone FM1216 --
|
|
M168-T 1461:0003 AVerTV Studio 48:17 FM1216 TDA9840T D [#f1]_ w/FM w/Remote
|
|
M168-U 1461:0004 TVCapture98 40:11 FI1216 -- D w/Remote
|
|
M168II-B 1461:0003 Medion MD9592 48:16 FM1216 TDA9873H D w/FM
|
|
======== =========== =============== ======= ====== ======== =======================
|
|
|
|
.. [#f1] Daughterboard MB68-A with TDA9820T and TDA9840T
|
|
.. [#f2] Sony NE41S soldered (stereo sound?)
|
|
.. [#f3] Daughterboard M118-A w/ pic 16c54 and 4 MHz quartz
|
|
|
|
- US site has different drivers for (as of 09/2002):
|
|
|
|
- EZ Capture/InterCam PCI (BT-848 chip)
|
|
- EZ Capture/InterCam PCI (BT-878 chip)
|
|
- TV-Phone (BT-848 chip)
|
|
- TV98 (BT-848 chip)
|
|
- TV98 With Remote (BT-848 chip)
|
|
- TV98 (BT-878 chip)
|
|
- TV98 With Remote (BT-878)
|
|
- TV/FM98 (BT-878 chip)
|
|
- AVerTV
|
|
- AverTV Stereo
|
|
- AVerTV Studio
|
|
|
|
DE hat diverse Treiber fuer diese Modelle (Stand 09/2002):
|
|
|
|
- TVPhone (848) mit Philips tuner FR12X6 (w/ FM radio)
|
|
- TVPhone (848) mit Philips tuner FM12X6 (w/ FM radio)
|
|
- TVCapture (848) w/Philips tuner FI12X6
|
|
- TVCapture (848) non-Philips tuner
|
|
- TVCapture98 (Bt878)
|
|
- TVPhone98 (Bt878)
|
|
- AVerTV und TVCapture98 w/VCR (Bt 878)
|
|
- AVerTVStudio und TVPhone98 w/VCR (Bt878)
|
|
- AVerTV GO Serie (Kein SVideo Input)
|
|
- AVerTV98 (BT-878 chip)
|
|
- AVerTV98 mit Fernbedienung (BT-878 chip)
|
|
- AVerTV/FM98 (BT-878 chip)
|
|
|
|
- VDOmate (www.averm.com.cn) = M168U ?
|
|
|
|
Aimslab
|
|
~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Video Highway or "Video Highway TR200" (ISA)
|
|
- Video Highway Xtreme (aka "VHX") (Bt848, FM w/ TEA5757)
|
|
|
|
IXMicro (former: IMS=Integrated Micro Solutions)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- IXTV BT848 (=TurboTV)
|
|
- IXTV BT878
|
|
- IMS TurboTV (Bt848)
|
|
|
|
Lifetec/Medion/Tevion/Aldi
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- LT9306/MD9306 = CPH061
|
|
- LT9415/MD9415 = LR90 Rev.F or Rev.G
|
|
- MD9592 = Avermedia TVphone98 (PCI_ID=1461:0003), PCB-Rev=M168II-B (w/TDA9873H)
|
|
- MD9717 = KNC One (Rev D4, saa7134, FM1216 MK2 tuner)
|
|
- MD5044 = KNC One (Rev D4, saa7134, FM1216ME MK3 tuner)
|
|
|
|
Modular Technologies (www.modulartech.com) UK
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- MM100 PCTV (Bt848)
|
|
- MM201 PCTV (Bt878, Bt832) w/ Quartzsight camera
|
|
- MM202 PCTV (Bt878, Bt832, tda9874)
|
|
- MM205 PCTV (Bt878)
|
|
- MM210 PCTV (Bt878) (Galaxy TV, Galaxymedia ?)
|
|
|
|
Terratec
|
|
~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Terra TV+ Version 1.0 (Bt848), "ceb105.PCB" printed on the PCB, TDA9821
|
|
- Terra TV+ Version 1.1 (Bt878), "LR74 Rev.E" printed on the PCB, TDA9821
|
|
- Terra TValueRadio, "LR102 Rev.C" printed on the PCB
|
|
- Terra TV/Radio+ Version 1.0, "80-CP2830100-0" TTTV3 printed on the PCB,
|
|
"CPH010-E83" on the back, SAA6588T, TDA9873H
|
|
- Terra TValue Version BT878, "80-CP2830110-0 TTTV4" printed on the PCB,
|
|
"CPH011-D83" on back
|
|
- Terra TValue Version 1.0 "ceb105.PCB" (really identical to Terra TV+ Version 1.0)
|
|
- Terra TValue New Revision "LR102 Rec.C"
|
|
- Terra Active Radio Upgrade (tea5757h, saa6588t)
|
|
|
|
- LR74 is a newer PCB revision of ceb105 (both incl. connector for Active Radio Upgrade)
|
|
|
|
- Cinergy 400 (saa7134), "E877 11(S)", "PM820092D" printed on PCB
|
|
- Cinergy 600 (saa7134)
|
|
|
|
Technisat
|
|
~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Discos ADR PC-Karte ISA (no TV!)
|
|
- Discos ADR PC-Karte PCI (probably no TV?)
|
|
- Techni-PC-Sat (Sat. analog)
|
|
Rev 1.2 (zr36120, vpx3220, stv0030, saa5246, BSJE3-494A)
|
|
- Mediafocus I (zr36120/zr36125, drp3510, Sat. analog + ADR Radio)
|
|
- Mediafocus II (saa7146, Sat. analog)
|
|
- SatADR Rev 2.1 (saa7146a, saa7113h, stv0056a, msp3400c, drp3510a, BSKE3-307A)
|
|
- SkyStar 1 DVB (AV7110) = Technotrend Premium
|
|
- SkyStar 2 DVB (B2C2) (=Sky2PC)
|
|
|
|
Siemens
|
|
~~~~~~~
|
|
|
|
Multimedia eXtension Board (MXB) (SAA7146, SAA7111)
|
|
|
|
Powercolor
|
|
~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- MTV878
|
|
Package comes with different contents:
|
|
|
|
a) pcb "MTV878" (CARD=75)
|
|
b) Pixelview Rev. 4\_
|
|
|
|
- MTV878R w/Remote Control
|
|
- MTV878F w/Remote Control w/FM radio
|
|
|
|
Pinnacle
|
|
~~~~~~~~
|
|
|
|
PCTV models:
|
|
|
|
- Mirovideo PCTV (Bt848)
|
|
- Mirovideo PCTV SE (Bt848)
|
|
- Mirovideo PCTV Pro (Bt848 + Daughterboard for TV Stereo and FM)
|
|
- Studio PCTV Rave (Bt848 Version = Mirovideo PCTV)
|
|
- Studio PCTV Rave (Bt878 package w/o infrared)
|
|
- Studio PCTV (Bt878)
|
|
- Studio PCTV Pro (Bt878 stereo w/ FM)
|
|
- Pinnacle PCTV (Bt878, MT2032)
|
|
- Pinnacle PCTV Pro (Bt878, MT2032)
|
|
- Pinncale PCTV Sat (bt878a, HM1821/1221) ["Conexant CX24110 with CX24108 tuner, aka HM1221/HM1811"]
|
|
- Pinnacle PCTV Sat XE
|
|
|
|
M(J)PEG capture and playback models:
|
|
|
|
- DC1+ (ISA)
|
|
- DC10 (zr36057, zr36060, saa7110, adv7176)
|
|
- DC10+ (zr36067, zr36060, saa7110, adv7176)
|
|
- DC20 (ql16x24b,zr36050, zr36016, saa7110, saa7187 ...)
|
|
- DC30 (zr36057, zr36050, zr36016, vpx3220, adv7176, ad1843, tea6415, miro FST97A1)
|
|
- DC30+ (zr36067, zr36050, zr36016, vpx3220, adv7176)
|
|
- DC50 (zr36067, zr36050, zr36016, saa7112, adv7176 (2 pcs.?), ad1843, miro FST97A1, Lattice ???)
|
|
|
|
Lenco
|
|
~~~~~
|
|
|
|
Models:
|
|
|
|
- MXR-9565 (=Technisat Mediafocus?)
|
|
- MXR-9571 (Bt848) (=CPH031?)
|
|
- MXR-9575
|
|
- MXR-9577 (Bt878) (=Prolink 878TV Rev.3x)
|
|
- MXTV-9578CP (Bt878) (= Prolink PV-BT878P+4E)
|
|
|
|
Iomega
|
|
~~~~~~
|
|
|
|
Buz (zr36067, zr36060, saa7111, saa7185)
|
|
|
|
LML
|
|
~~~
|
|
LML33 (zr36067, zr36060, bt819, bt856)
|
|
|
|
Grandtec
|
|
~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Grand Video Capture (Bt848)
|
|
- Multi Capture Card (Bt878)
|
|
|
|
Koutech
|
|
~~~~~~~
|
|
|
|
Models:
|
|
|
|
- KW-606 (Bt848)
|
|
- KW-607 (Bt848 capture only)
|
|
- KW-606RSF
|
|
- KW-607A (capture only)
|
|
- KW-608 (Zoran capture only)
|
|
|
|
IODATA (jp)
|
|
~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- GV-BCTV/PCI
|
|
- GV-BCTV2/PCI
|
|
- GV-BCTV3/PCI
|
|
- GV-BCTV4/PCI
|
|
- GV-VCP/PCI (capture only)
|
|
- GV-VCP2/PCI (capture only)
|
|
|
|
Canopus (jp)
|
|
~~~~~~~~~~~~
|
|
|
|
WinDVR = Kworld "KW-TVL878RF"
|
|
|
|
www.sigmacom.co.kr
|
|
~~~~~~~~~~~~~~~~~~
|
|
|
|
Sigma Cyber TV II
|
|
|
|
www.sasem.co.kr
|
|
~~~~~~~~~~~~~~~
|
|
|
|
Litte OnAir TV
|
|
|
|
hama
|
|
~~~~
|
|
|
|
TV/Radio-Tuner Card, PCI (Model 44677) = CPH051
|
|
|
|
Sigma Designs
|
|
~~~~~~~~~~~~~
|
|
|
|
Hollywood plus (em8300, em9010, adv7175), (PCB "M340-10") MPEG DVD decoder
|
|
|
|
Formac
|
|
~~~~~~
|
|
|
|
Models:
|
|
|
|
- iProTV (Card for iMac Mezzanine slot, Bt848+SCSI)
|
|
- ProTV (Bt848)
|
|
- ProTV II = ProTV Stereo (Bt878) ["stereo" means FM stereo, tv is still mono]
|
|
|
|
ATI
|
|
~~~
|
|
|
|
Models:
|
|
|
|
- TV-Wonder
|
|
- TV-Wonder VE
|
|
|
|
Diamond Multimedia
|
|
~~~~~~~~~~~~~~~~~~
|
|
|
|
DTV2000 (Bt848, tda9875)
|
|
|
|
Aopen
|
|
~~~~~
|
|
|
|
- VA1000 Plus (w/ Stereo)
|
|
- VA1000 Lite
|
|
- VA1000 (=LR90)
|
|
|
|
Intel
|
|
~~~~~
|
|
|
|
Models:
|
|
|
|
- Smart Video Recorder (ISA full-length)
|
|
- Smart Video Recorder pro (ISA half-length)
|
|
- Smart Video Recorder III (Bt848)
|
|
|
|
STB
|
|
~~~
|
|
|
|
Models:
|
|
|
|
- STB Gateway 6000704 (bt878)
|
|
- STB Gateway 6000699 (bt848)
|
|
- STB Gateway 6000402 (bt848)
|
|
- STB TV130 PCI
|
|
|
|
Videologic
|
|
~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Captivator Pro/TV (ISA?)
|
|
- Captivator PCI/VC (Bt848 bundled with camera) (capture only)
|
|
|
|
Technotrend
|
|
~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- TT-SAT PCI (PCB "Sat-PCI Rev.:1.3.1"; zr36125, vpx3225d, stc0056a, Tuner:BSKE6-155A
|
|
- TT-DVB-Sat
|
|
- revisions 1.1, 1.3, 1.5, 1.6 and 2.1
|
|
- This card is sold as OEM from:
|
|
|
|
- Siemens DVB-s Card
|
|
- Hauppauge WinTV DVB-S
|
|
- Technisat SkyStar 1 DVB
|
|
- Galaxis DVB Sat
|
|
|
|
- Now this card is called TT-PCline Premium Family
|
|
- TT-Budget (saa7146, bsru6-701a)
|
|
This card is sold as OEM from:
|
|
|
|
- Hauppauge WinTV Nova
|
|
- Satelco Standard PCI (DVB-S)
|
|
- TT-DVB-C PCI
|
|
|
|
Teles
|
|
~~~~~
|
|
|
|
DVB-s (Rev. 2.2, BSRV2-301A, data only?)
|
|
|
|
Remote Vision
|
|
~~~~~~~~~~~~~
|
|
|
|
MX RV605 (Bt848 capture only)
|
|
|
|
Boeder
|
|
~~~~~~
|
|
|
|
Models:
|
|
|
|
- PC ChatCam (Model 68252) (Bt848 capture only)
|
|
- Tv/Fm Capture Card (Model 68404) = PV951
|
|
|
|
Media-Surfer (esc-kathrein.de)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Sat-Surfer (ISA)
|
|
- Sat-Surfer PCI = Techni-PC-Sat
|
|
- Cable-Surfer 1
|
|
- Cable-Surfer 2
|
|
- Cable-Surfer PCI (zr36120)
|
|
- Audio-Surfer (ISA Radio card)
|
|
|
|
Jetway (www.jetway.com.tw)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- JW-TV 878M
|
|
- JW-TV 878 = KWorld KW-TV878RF
|
|
|
|
Galaxis
|
|
~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Galaxis DVB Card S CI
|
|
- Galaxis DVB Card C CI
|
|
- Galaxis DVB Card S
|
|
- Galaxis DVB Card C
|
|
- Galaxis plug.in S [neuer Name: Galaxis DVB Card S CI
|
|
|
|
Hauppauge
|
|
~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- many many WinTV models ...
|
|
- WinTV DVBs = Technotrend Premium 1.3
|
|
- WinTV NOVA = Technotrend Budget 1.1 "S-DVB DATA"
|
|
- WinTV NOVA-CI "SDVBACI"
|
|
- WinTV Nova USB (=Technotrend USB 1.0)
|
|
- WinTV-Nexus-s (=Technotrend Premium 2.1 or 2.2)
|
|
- WinTV PVR
|
|
- WinTV PVR 250
|
|
- WinTV PVR 450
|
|
|
|
US models
|
|
|
|
-990 WinTV-PVR-350 (249USD) (iTVC15 chipset + radio)
|
|
-980 WinTV-PVR-250 (149USD) (iTVC15 chipset)
|
|
-880 WinTV-PVR-PCI (199USD) (KFIR chipset + bt878)
|
|
-881 WinTV-PVR-USB
|
|
-190 WinTV-GO
|
|
-191 WinTV-GO-FM
|
|
-404 WinTV
|
|
-401 WinTV-radio
|
|
-495 WinTV-Theater
|
|
-602 WinTV-USB
|
|
-621 WinTV-USB-FM
|
|
-600 USB-Live
|
|
-698 WinTV-HD
|
|
-697 WinTV-D
|
|
-564 WinTV-Nexus-S
|
|
|
|
Deutsche Modelle:
|
|
|
|
-603 WinTV GO
|
|
-719 WinTV Primio-FM
|
|
-718 WinTV PCI-FM
|
|
-497 WinTV Theater
|
|
-569 WinTV USB
|
|
-568 WinTV USB-FM
|
|
-882 WinTV PVR
|
|
-981 WinTV PVR 250
|
|
-891 WinTV-PVR-USB
|
|
-541 WinTV Nova
|
|
-488 WinTV Nova-Ci
|
|
-564 WinTV-Nexus-s
|
|
-727 WinTV-DVB-c
|
|
-545 Common Interface
|
|
-898 WinTV-Nova-USB
|
|
|
|
UK models:
|
|
|
|
-607 WinTV Go
|
|
-693,793 WinTV Primio FM
|
|
-647,747 WinTV PCI FM
|
|
-498 WinTV Theater
|
|
-883 WinTV PVR
|
|
-893 WinTV PVR USB (Duplicate entry)
|
|
-566 WinTV USB (UK)
|
|
-573 WinTV USB FM
|
|
-429 Impact VCB (bt848)
|
|
-600 USB Live (Video-In 1x Comp, 1xSVHS)
|
|
-542 WinTV Nova
|
|
-717 WinTV DVB-S
|
|
-909 Nova-t PCI
|
|
-893 Nova-t USB (Duplicate entry)
|
|
-802 MyTV
|
|
-804 MyView
|
|
-809 MyVideo
|
|
-872 MyTV2Go FM
|
|
-546 WinTV Nova-S CI
|
|
-543 WinTV Nova
|
|
-907 Nova-S USB
|
|
-908 Nova-T USB
|
|
-717 WinTV Nexus-S
|
|
-157 DEC3000-s Standalone + USB
|
|
|
|
Spain:
|
|
|
|
-685 WinTV-Go
|
|
-690 WinTV-PrimioFM
|
|
-416 WinTV-PCI Nicam Estereo
|
|
-677 WinTV-PCI-FM
|
|
-699 WinTV-Theater
|
|
-683 WinTV-USB
|
|
-678 WinTV-USB-FM
|
|
-983 WinTV-PVR-250
|
|
-883 WinTV-PVR-PCI
|
|
-993 WinTV-PVR-350
|
|
-893 WinTV-PVR-USB
|
|
-728 WinTV-DVB-C PCI
|
|
-832 MyTV2Go
|
|
-869 MyTV2Go-FM
|
|
-805 MyVideo (USB)
|
|
|
|
|
|
Matrix-Vision
|
|
~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- MATRIX-Vision MV-Delta
|
|
- MATRIX-Vision MV-Delta 2
|
|
- MVsigma-SLC (Bt848)
|
|
|
|
Conceptronic (.net)
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- TVCON FM, TV card w/ FM = CPH05x
|
|
- TVCON = CPH06x
|
|
|
|
BestData
|
|
~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- HCC100 = VCC100rev1 + camera
|
|
- VCC100 rev1 (bt848)
|
|
- VCC100 rev2 (bt878)
|
|
|
|
Gallant (www.gallantcom.com) www.minton.com.tw
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Intervision IV-510 (capture only bt8x8)
|
|
- Intervision IV-550 (bt8x8)
|
|
- Intervision IV-100 (zoran)
|
|
- Intervision IV-1000 (bt8x8)
|
|
|
|
Asonic (www.asonic.com.cn) (website down)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
SkyEye tv 878
|
|
|
|
Hoontech
|
|
~~~~~~~~
|
|
|
|
878TV/FM
|
|
|
|
Teppro (www.itcteppro.com.tw)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- ITC PCITV (Card Ver 1.0) "Teppro TV1/TVFM1 Card"
|
|
- ITC PCITV (Card Ver 2.0)
|
|
- ITC PCITV (Card Ver 3.0) = "PV-BT878P+ (REV.9D)"
|
|
- ITC PCITV (Card Ver 4.0)
|
|
- TEPPRO IV-550 (For BT848 Main Chip)
|
|
- ITC DSTTV (bt878, satellite)
|
|
- ITC VideoMaker (saa7146, StreamMachine sm2110, tvtuner) "PV-SM2210P+ (REV:1C)"
|
|
|
|
Kworld (www.kworld.com.tw)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
PC TV Station:
|
|
|
|
- KWORLD KW-TV878R TV (no radio)
|
|
- KWORLD KW-TV878RF TV (w/ radio)
|
|
- KWORLD KW-TVL878RF (low profile)
|
|
- KWORLD KW-TV713XRF (saa7134)
|
|
|
|
|
|
MPEG TV Station (same cards as above plus WinDVR Software MPEG en/decoder)
|
|
|
|
- KWORLD KW-TV878R -Pro TV (no Radio)
|
|
- KWORLD KW-TV878RF-Pro TV (w/ Radio)
|
|
- KWORLD KW-TV878R -Ultra TV (no Radio)
|
|
- KWORLD KW-TV878RF-Ultra TV (w/ Radio)
|
|
|
|
JTT/ Justy Corp.(http://www.jtt.ne.jp/)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
JTT-02 (JTT TV) "TV watchmate pro" (bt848)
|
|
|
|
ADS www.adstech.com
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Channel Surfer TV ( CHX-950 )
|
|
- Channel Surfer TV+FM ( CHX-960FM )
|
|
|
|
AVEC www.prochips.com
|
|
~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
AVEC Intercapture (bt848, tea6320)
|
|
|
|
NoBrand
|
|
~~~~~~~
|
|
|
|
TV Excel = Australian Name for "PV-BT878P+ 8E" or "878TV Rev.3\_"
|
|
|
|
Mach www.machspeed.com
|
|
~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Mach TV 878
|
|
|
|
Eline www.eline-net.com/
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26 (bt878)
|
|
- Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x)
|
|
|
|
Spirit
|
|
~~~~~~
|
|
|
|
- Spirit TV Tuner/Video Capture Card (bt848)
|
|
|
|
Boser www.boser.com.tw
|
|
~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- HS-878 Mini PCI Capture Add-on Card
|
|
- HS-879 Mini PCI 3D Audio and Capture Add-on Card (w/ ES1938 Solo-1)
|
|
|
|
Satelco www.citycom-gmbh.de, www.satelco.de
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- TV-FM =KNC1 saa7134
|
|
- Standard PCI (DVB-S) = Technotrend Budget
|
|
- Standard PCI (DVB-S) w/ CI
|
|
- Satelco Highend PCI (DVB-S) = Technotrend Premium
|
|
|
|
|
|
Sensoray www.sensoray.com
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Sensoray 311 (PC/104 bus)
|
|
- Sensoray 611 (PCI)
|
|
|
|
CEI (Chartered Electronics Industries Pte Ltd [CEI] [FCC ID HBY])
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- TV Tuner - HBY-33A-RAFFLES Brooktree Bt848KPF + Philips
|
|
- TV Tuner MG9910 - HBY33A-TVO CEI + Philips SAA7110 + OKI M548262 + ST STV8438CV
|
|
- Primetime TV (ISA)
|
|
|
|
- acquired by Singapore Technologies
|
|
- now operating as Chartered Semiconductor Manufacturing
|
|
- Manufacturer of video cards is listed as:
|
|
|
|
- Cogent Electronics Industries [CEI]
|
|
|
|
AITech
|
|
~~~~~~
|
|
|
|
Models:
|
|
|
|
- Wavewatcher TV (ISA)
|
|
- AITech WaveWatcher TV-PCI = can be LR26 (Bt848) or LR50 (BT878)
|
|
- WaveWatcher TVR-202 TV/FM Radio Card (ISA)
|
|
|
|
MAXRON
|
|
~~~~~~
|
|
|
|
Maxron MaxTV/FM Radio (KW-TV878-FNT) = Kworld or JW-TV878-FBK
|
|
|
|
www.ids-imaging.de
|
|
~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Falcon Series (capture only)
|
|
|
|
In USA: http://www.theimagingsource.com/
|
|
- DFG/LC1
|
|
|
|
www.sknet-web.co.jp
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
SKnet Monster TV (saa7134)
|
|
|
|
A-Max www.amaxhk.com (Colormax, Amax, Napa)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
APAC Viewcomp 878
|
|
|
|
Cybertainment
|
|
~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- CyberMail AV Video Email Kit w/ PCI Capture Card (capture only)
|
|
- CyberMail Xtreme
|
|
|
|
These are Flyvideo
|
|
|
|
VCR (http://www.vcrinc.com/)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Video Catcher 16
|
|
|
|
Twinhan
|
|
~~~~~~~
|
|
|
|
Models:
|
|
|
|
- DST Card/DST-IP (bt878, twinhan asic) VP-1020
|
|
- Sold as:
|
|
|
|
- KWorld DVBS Satellite TV-Card
|
|
- Powercolor DSTV Satellite Tuner Card
|
|
- Prolink Pixelview DTV2000
|
|
- Provideo PV-911 Digital Satellite TV Tuner Card With Common Interface ?
|
|
|
|
- DST-CI Card (DVB Satellite) VP-1030
|
|
- DCT Card (DVB cable)
|
|
|
|
MSI
|
|
~~~
|
|
|
|
Models:
|
|
|
|
- MSI TV@nywhere Tuner Card (MS-8876) (CX23881/883) Not Bt878 compatible.
|
|
- MS-8401 DVB-S
|
|
|
|
Focus www.focusinfo.com
|
|
~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
InVideo PCI (bt878)
|
|
|
|
Sdisilk www.sdisilk.com/
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- SDI Silk 100
|
|
- SDI Silk 200 SDI Input Card
|
|
|
|
www.euresys.com
|
|
~~~~~~~~~~~~~~~
|
|
|
|
PICOLO series
|
|
|
|
PMC/Pace
|
|
~~~~~~~~
|
|
|
|
www.pacecom.co.uk website closed
|
|
|
|
Mercury www.kobian.com (UK and FR)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- LR50
|
|
- LR138RBG-Rx == LR138
|
|
|
|
TEC sound
|
|
~~~~~~~~~
|
|
|
|
TV-Mate = Zoltrix VP-8482
|
|
|
|
Though educated googling found: www.techmakers.com
|
|
|
|
(package and manuals don't have any other manufacturer info) TecSound
|
|
|
|
Lorenzen www.lorenzen.de
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
SL DVB-S PCI = Technotrend Budget PCI (su1278 or bsru version)
|
|
|
|
Origo (.uk) www.origo2000.com
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
PC TV Card = LR50
|
|
|
|
I/O Magic www.iomagic.com
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
PC PVR - Desktop TV Personal Video Recorder DR-PCTV100 = Pinnacle ROB2D-51009464 4.0 + Cyberlink PowerVCR II
|
|
|
|
Arowana
|
|
~~~~~~~
|
|
|
|
TV-Karte / Poso Power TV (?) = Zoltrix VP-8482 (?)
|
|
|
|
iTVC15 boards
|
|
~~~~~~~~~~~~~
|
|
|
|
kuroutoshikou.com ITVC15
|
|
yuan.com MPG160 PCI TV (Internal PCI MPEG2 encoder card plus TV-tuner)
|
|
|
|
Asus www.asuscom.com
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Models:
|
|
|
|
- Asus TV Tuner Card 880 NTSC (low profile, cx23880)
|
|
- Asus TV (saa7134)
|
|
|
|
Hoontech
|
|
~~~~~~~~
|
|
|
|
http://www.hoontech.de/
|
|
|
|
- HART Vision 848 (H-ART Vision 848)
|
|
- HART Vision 878 (H-Art Vision 878)
|
|
|
|
|
|
|
|
Chips used at bttv devices
|
|
--------------------------
|
|
|
|
- all boards:
|
|
|
|
- Brooktree Bt848/848A/849/878/879: video capture chip
|
|
|
|
- Board specific
|
|
|
|
- Miro PCTV:
|
|
|
|
- Philips or Temic Tuner
|
|
|
|
- Hauppauge Win/TV pci (version 405):
|
|
|
|
- Microchip 24LC02B or Philips 8582E2Y:
|
|
|
|
- 256 Byte EEPROM with configuration information
|
|
- I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
|
|
|
|
- Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23
|
|
|
|
- TDA9800: sound decoder
|
|
|
|
- Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem)
|
|
|
|
- 14052B: analog switch for selection of sound source
|
|
|
|
- PAL:
|
|
|
|
- TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
|
|
- TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
|
|
|
|
- NTSC:
|
|
|
|
- TDA5731: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
|
|
- TSA5518: no datasheet available on Philips site
|
|
|
|
- STB TV pci:
|
|
|
|
- ???
|
|
- if you want better support for STB cards send me info!
|
|
Look at the board! What chips are on it?
|
|
|
|
|
|
|
|
|
|
Specs
|
|
-----
|
|
|
|
Philips http://www.Semiconductors.COM/pip/
|
|
|
|
Conexant http://www.conexant.com/
|
|
|
|
Micronas http://www.micronas.com/en/home/index.html
|
|
|
|
Thanks
|
|
------
|
|
|
|
Many thanks to:
|
|
|
|
- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848
|
|
and tuner programming and his control program xtvc.
|
|
|
|
- Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext
|
|
package.
|
|
|
|
- Gerd Hoffmann for the MSP3400 support and the modular
|
|
I2C, tuner, ... support.
|
|
|
|
|
|
- MATRIX Vision for giving us 2 cards for free, which made support of
|
|
single crystal operation possible.
|
|
|
|
- MIRO for providing a free PCTV card and detailed information about the
|
|
components on their cards. (E.g. how the tuner type is detected)
|
|
Without their card I could not have debugged the NTSC mode.
|
|
|
|
- Hauppauge for telling how the sound input is selected and what components
|
|
they do and will use on their radio cards.
|
|
Also many thanks for faxing me the FM1216 data sheet.
|
|
|
|
Contributors
|
|
------------
|
|
|
|
Michael Chu <mmchu@pobox.com>
|
|
AverMedia fix and more flexible card recognition
|
|
|
|
Alan Cox <alan@lxorguk.ukuu.org.uk>
|
|
Video4Linux interface and 2.1.x kernel adaptation
|
|
|
|
Chris Kleitsch
|
|
Hardware I2C
|
|
|
|
Gerd Hoffmann
|
|
Radio card (ITT sound processor)
|
|
|
|
bigfoot <bigfoot@net-way.net>
|
|
|
|
Ragnar Hojland Espinosa <ragnar@macula.net>
|
|
ConferenceTV card
|
|
|
|
|
|
+ many more (please mail me if you are missing in this list and would
|
|
like to be mentioned)
|