![Stephen Boyd](/assets/img/avatar_default.png)
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
1024 lines
38 KiB
C
1024 lines
38 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
|
|
* Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
|
|
*/
|
|
#ifndef __LINUX_CLK_PROVIDER_H
|
|
#define __LINUX_CLK_PROVIDER_H
|
|
|
|
#include <linux/of.h>
|
|
#include <linux/of_clk.h>
|
|
|
|
#ifdef CONFIG_COMMON_CLK
|
|
|
|
/*
|
|
* flags used across common struct clk. these flags should only affect the
|
|
* top-level framework. custom flags for dealing with hardware specifics
|
|
* belong in struct clk_foo
|
|
*
|
|
* Please update clk_flags[] in drivers/clk/clk.c when making changes here!
|
|
*/
|
|
#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */
|
|
#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */
|
|
#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */
|
|
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
|
|
/* unused */
|
|
/* unused */
|
|
#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
|
|
#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */
|
|
#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */
|
|
#define CLK_RECALC_NEW_RATES BIT(9) /* recalc rates after notifications */
|
|
#define CLK_SET_RATE_UNGATE BIT(10) /* clock needs to run to set rate */
|
|
#define CLK_IS_CRITICAL BIT(11) /* do not gate, ever */
|
|
/* parents need enable during gate/ungate, set rate and re-parent */
|
|
#define CLK_OPS_PARENT_ENABLE BIT(12)
|
|
/* duty cycle call may be forwarded to the parent clock */
|
|
#define CLK_DUTY_CYCLE_PARENT BIT(13)
|
|
|
|
struct clk;
|
|
struct clk_hw;
|
|
struct clk_core;
|
|
struct dentry;
|
|
|
|
/**
|
|
* struct clk_rate_request - Structure encoding the clk constraints that
|
|
* a clock user might require.
|
|
*
|
|
* @rate: Requested clock rate. This field will be adjusted by
|
|
* clock drivers according to hardware capabilities.
|
|
* @min_rate: Minimum rate imposed by clk users.
|
|
* @max_rate: Maximum rate imposed by clk users.
|
|
* @best_parent_rate: The best parent rate a parent can provide to fulfill the
|
|
* requested constraints.
|
|
* @best_parent_hw: The most appropriate parent clock that fulfills the
|
|
* requested constraints.
|
|
*
|
|
*/
|
|
struct clk_rate_request {
|
|
unsigned long rate;
|
|
unsigned long min_rate;
|
|
unsigned long max_rate;
|
|
unsigned long best_parent_rate;
|
|
struct clk_hw *best_parent_hw;
|
|
};
|
|
|
|
/**
|
|
* struct clk_duty - Struture encoding the duty cycle ratio of a clock
|
|
*
|
|
* @num: Numerator of the duty cycle ratio
|
|
* @den: Denominator of the duty cycle ratio
|
|
*/
|
|
struct clk_duty {
|
|
unsigned int num;
|
|
unsigned int den;
|
|
};
|
|
|
|
/**
|
|
* struct clk_ops - Callback operations for hardware clocks; these are to
|
|
* be provided by the clock implementation, and will be called by drivers
|
|
* through the clk_* api.
|
|
*
|
|
* @prepare: Prepare the clock for enabling. This must not return until
|
|
* the clock is fully prepared, and it's safe to call clk_enable.
|
|
* This callback is intended to allow clock implementations to
|
|
* do any initialisation that may sleep. Called with
|
|
* prepare_lock held.
|
|
*
|
|
* @unprepare: Release the clock from its prepared state. This will typically
|
|
* undo any work done in the @prepare callback. Called with
|
|
* prepare_lock held.
|
|
*
|
|
* @is_prepared: Queries the hardware to determine if the clock is prepared.
|
|
* This function is allowed to sleep. Optional, if this op is not
|
|
* set then the prepare count will be used.
|
|
*
|
|
* @unprepare_unused: Unprepare the clock atomically. Only called from
|
|
* clk_disable_unused for prepare clocks with special needs.
|
|
* Called with prepare mutex held. This function may sleep.
|
|
*
|
|
* @enable: Enable the clock atomically. This must not return until the
|
|
* clock is generating a valid clock signal, usable by consumer
|
|
* devices. Called with enable_lock held. This function must not
|
|
* sleep.
|
|
*
|
|
* @disable: Disable the clock atomically. Called with enable_lock held.
|
|
* This function must not sleep.
|
|
*
|
|
* @is_enabled: Queries the hardware to determine if the clock is enabled.
|
|
* This function must not sleep. Optional, if this op is not
|
|
* set then the enable count will be used.
|
|
*
|
|
* @disable_unused: Disable the clock atomically. Only called from
|
|
* clk_disable_unused for gate clocks with special needs.
|
|
* Called with enable_lock held. This function must not
|
|
* sleep.
|
|
*
|
|
* @save_context: Save the context of the clock in prepration for poweroff.
|
|
*
|
|
* @restore_context: Restore the context of the clock after a restoration
|
|
* of power.
|
|
*
|
|
* @recalc_rate Recalculate the rate of this clock, by querying hardware. The
|
|
* parent rate is an input parameter. It is up to the caller to
|
|
* ensure that the prepare_mutex is held across this call.
|
|
* Returns the calculated rate. Optional, but recommended - if
|
|
* this op is not set then clock rate will be initialized to 0.
|
|
*
|
|
* @round_rate: Given a target rate as input, returns the closest rate actually
|
|
* supported by the clock. The parent rate is an input/output
|
|
* parameter.
|
|
*
|
|
* @determine_rate: Given a target rate as input, returns the closest rate
|
|
* actually supported by the clock, and optionally the parent clock
|
|
* that should be used to provide the clock rate.
|
|
*
|
|
* @set_parent: Change the input source of this clock; for clocks with multiple
|
|
* possible parents specify a new parent by passing in the index
|
|
* as a u8 corresponding to the parent in either the .parent_names
|
|
* or .parents arrays. This function in affect translates an
|
|
* array index into the value programmed into the hardware.
|
|
* Returns 0 on success, -EERROR otherwise.
|
|
*
|
|
* @get_parent: Queries the hardware to determine the parent of a clock. The
|
|
* return value is a u8 which specifies the index corresponding to
|
|
* the parent clock. This index can be applied to either the
|
|
* .parent_names or .parents arrays. In short, this function
|
|
* translates the parent value read from hardware into an array
|
|
* index. Currently only called when the clock is initialized by
|
|
* __clk_init. This callback is mandatory for clocks with
|
|
* multiple parents. It is optional (and unnecessary) for clocks
|
|
* with 0 or 1 parents.
|
|
*
|
|
* @set_rate: Change the rate of this clock. The requested rate is specified
|
|
* by the second argument, which should typically be the return
|
|
* of .round_rate call. The third argument gives the parent rate
|
|
* which is likely helpful for most .set_rate implementation.
|
|
* Returns 0 on success, -EERROR otherwise.
|
|
*
|
|
* @set_rate_and_parent: Change the rate and the parent of this clock. The
|
|
* requested rate is specified by the second argument, which
|
|
* should typically be the return of .round_rate call. The
|
|
* third argument gives the parent rate which is likely helpful
|
|
* for most .set_rate_and_parent implementation. The fourth
|
|
* argument gives the parent index. This callback is optional (and
|
|
* unnecessary) for clocks with 0 or 1 parents as well as
|
|
* for clocks that can tolerate switching the rate and the parent
|
|
* separately via calls to .set_parent and .set_rate.
|
|
* Returns 0 on success, -EERROR otherwise.
|
|
*
|
|
* @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy
|
|
* is expressed in ppb (parts per billion). The parent accuracy is
|
|
* an input parameter.
|
|
* Returns the calculated accuracy. Optional - if this op is not
|
|
* set then clock accuracy will be initialized to parent accuracy
|
|
* or 0 (perfect clock) if clock has no parent.
|
|
*
|
|
* @get_phase: Queries the hardware to get the current phase of a clock.
|
|
* Returned values are 0-359 degrees on success, negative
|
|
* error codes on failure.
|
|
*
|
|
* @set_phase: Shift the phase this clock signal in degrees specified
|
|
* by the second argument. Valid values for degrees are
|
|
* 0-359. Return 0 on success, otherwise -EERROR.
|
|
*
|
|
* @get_duty_cycle: Queries the hardware to get the current duty cycle ratio
|
|
* of a clock. Returned values denominator cannot be 0 and must be
|
|
* superior or equal to the numerator.
|
|
*
|
|
* @set_duty_cycle: Apply the duty cycle ratio to this clock signal specified by
|
|
* the numerator (2nd argurment) and denominator (3rd argument).
|
|
* Argument must be a valid ratio (denominator > 0
|
|
* and >= numerator) Return 0 on success, otherwise -EERROR.
|
|
*
|
|
* @init: Perform platform-specific initialization magic.
|
|
* This is not not used by any of the basic clock types.
|
|
* Please consider other ways of solving initialization problems
|
|
* before using this callback, as its use is discouraged.
|
|
*
|
|
* @debug_init: Set up type-specific debugfs entries for this clock. This
|
|
* is called once, after the debugfs directory entry for this
|
|
* clock has been created. The dentry pointer representing that
|
|
* directory is provided as an argument. Called with
|
|
* prepare_lock held. Returns 0 on success, -EERROR otherwise.
|
|
*
|
|
*
|
|
* The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
|
|
* implementations to split any work between atomic (enable) and sleepable
|
|
* (prepare) contexts. If enabling a clock requires code that might sleep,
|
|
* this must be done in clk_prepare. Clock enable code that will never be
|
|
* called in a sleepable context may be implemented in clk_enable.
|
|
*
|
|
* Typically, drivers will call clk_prepare when a clock may be needed later
|
|
* (eg. when a device is opened), and clk_enable when the clock is actually
|
|
* required (eg. from an interrupt). Note that clk_prepare MUST have been
|
|
* called before clk_enable.
|
|
*/
|
|
struct clk_ops {
|
|
int (*prepare)(struct clk_hw *hw);
|
|
void (*unprepare)(struct clk_hw *hw);
|
|
int (*is_prepared)(struct clk_hw *hw);
|
|
void (*unprepare_unused)(struct clk_hw *hw);
|
|
int (*enable)(struct clk_hw *hw);
|
|
void (*disable)(struct clk_hw *hw);
|
|
int (*is_enabled)(struct clk_hw *hw);
|
|
void (*disable_unused)(struct clk_hw *hw);
|
|
int (*save_context)(struct clk_hw *hw);
|
|
void (*restore_context)(struct clk_hw *hw);
|
|
unsigned long (*recalc_rate)(struct clk_hw *hw,
|
|
unsigned long parent_rate);
|
|
long (*round_rate)(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *parent_rate);
|
|
int (*determine_rate)(struct clk_hw *hw,
|
|
struct clk_rate_request *req);
|
|
int (*set_parent)(struct clk_hw *hw, u8 index);
|
|
u8 (*get_parent)(struct clk_hw *hw);
|
|
int (*set_rate)(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate);
|
|
int (*set_rate_and_parent)(struct clk_hw *hw,
|
|
unsigned long rate,
|
|
unsigned long parent_rate, u8 index);
|
|
unsigned long (*recalc_accuracy)(struct clk_hw *hw,
|
|
unsigned long parent_accuracy);
|
|
int (*get_phase)(struct clk_hw *hw);
|
|
int (*set_phase)(struct clk_hw *hw, int degrees);
|
|
int (*get_duty_cycle)(struct clk_hw *hw,
|
|
struct clk_duty *duty);
|
|
int (*set_duty_cycle)(struct clk_hw *hw,
|
|
struct clk_duty *duty);
|
|
void (*init)(struct clk_hw *hw);
|
|
void (*debug_init)(struct clk_hw *hw, struct dentry *dentry);
|
|
};
|
|
|
|
/**
|
|
* struct clk_parent_data - clk parent information
|
|
* @hw: parent clk_hw pointer (used for clk providers with internal clks)
|
|
* @fw_name: parent name local to provider registering clk
|
|
* @name: globally unique parent name (used as a fallback)
|
|
* @index: parent index local to provider registering clk (if @fw_name absent)
|
|
*/
|
|
struct clk_parent_data {
|
|
const struct clk_hw *hw;
|
|
const char *fw_name;
|
|
const char *name;
|
|
int index;
|
|
};
|
|
|
|
/**
|
|
* struct clk_init_data - holds init data that's common to all clocks and is
|
|
* shared between the clock provider and the common clock framework.
|
|
*
|
|
* @name: clock name
|
|
* @ops: operations this clock supports
|
|
* @parent_names: array of string names for all possible parents
|
|
* @parent_data: array of parent data for all possible parents (when some
|
|
* parents are external to the clk controller)
|
|
* @parent_hws: array of pointers to all possible parents (when all parents
|
|
* are internal to the clk controller)
|
|
* @num_parents: number of possible parents
|
|
* @flags: framework-level hints and quirks
|
|
*/
|
|
struct clk_init_data {
|
|
const char *name;
|
|
const struct clk_ops *ops;
|
|
/* Only one of the following three should be assigned */
|
|
const char * const *parent_names;
|
|
const struct clk_parent_data *parent_data;
|
|
const struct clk_hw **parent_hws;
|
|
u8 num_parents;
|
|
unsigned long flags;
|
|
};
|
|
|
|
/**
|
|
* struct clk_hw - handle for traversing from a struct clk to its corresponding
|
|
* hardware-specific structure. struct clk_hw should be declared within struct
|
|
* clk_foo and then referenced by the struct clk instance that uses struct
|
|
* clk_foo's clk_ops
|
|
*
|
|
* @core: pointer to the struct clk_core instance that points back to this
|
|
* struct clk_hw instance
|
|
*
|
|
* @clk: pointer to the per-user struct clk instance that can be used to call
|
|
* into the clk API
|
|
*
|
|
* @init: pointer to struct clk_init_data that contains the init data shared
|
|
* with the common clock framework.
|
|
*/
|
|
struct clk_hw {
|
|
struct clk_core *core;
|
|
struct clk *clk;
|
|
const struct clk_init_data *init;
|
|
};
|
|
|
|
/*
|
|
* DOC: Basic clock implementations common to many platforms
|
|
*
|
|
* Each basic clock hardware type is comprised of a structure describing the
|
|
* clock hardware, implementations of the relevant callbacks in struct clk_ops,
|
|
* unique flags for that hardware type, a registration function and an
|
|
* alternative macro for static initialization
|
|
*/
|
|
|
|
/**
|
|
* struct clk_fixed_rate - fixed-rate clock
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @fixed_rate: constant frequency of clock
|
|
*/
|
|
struct clk_fixed_rate {
|
|
struct clk_hw hw;
|
|
unsigned long fixed_rate;
|
|
unsigned long fixed_accuracy;
|
|
};
|
|
|
|
#define to_clk_fixed_rate(_hw) container_of(_hw, struct clk_fixed_rate, hw)
|
|
|
|
extern const struct clk_ops clk_fixed_rate_ops;
|
|
struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
|
|
const char *parent_name, unsigned long flags,
|
|
unsigned long fixed_rate);
|
|
struct clk_hw *clk_hw_register_fixed_rate(struct device *dev, const char *name,
|
|
const char *parent_name, unsigned long flags,
|
|
unsigned long fixed_rate);
|
|
struct clk *clk_register_fixed_rate_with_accuracy(struct device *dev,
|
|
const char *name, const char *parent_name, unsigned long flags,
|
|
unsigned long fixed_rate, unsigned long fixed_accuracy);
|
|
void clk_unregister_fixed_rate(struct clk *clk);
|
|
struct clk_hw *clk_hw_register_fixed_rate_with_accuracy(struct device *dev,
|
|
const char *name, const char *parent_name, unsigned long flags,
|
|
unsigned long fixed_rate, unsigned long fixed_accuracy);
|
|
void clk_hw_unregister_fixed_rate(struct clk_hw *hw);
|
|
|
|
void of_fixed_clk_setup(struct device_node *np);
|
|
|
|
/**
|
|
* struct clk_gate - gating clock
|
|
*
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @reg: register controlling gate
|
|
* @bit_idx: single bit controlling gate
|
|
* @flags: hardware-specific flags
|
|
* @lock: register lock
|
|
*
|
|
* Clock which can gate its output. Implements .enable & .disable
|
|
*
|
|
* Flags:
|
|
* CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
|
|
* enable the clock. Setting this flag does the opposite: setting the bit
|
|
* disable the clock and clearing it enables the clock
|
|
* CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit
|
|
* of this register, and mask of gate bits are in higher 16-bit of this
|
|
* register. While setting the gate bits, higher 16-bit should also be
|
|
* updated to indicate changing gate bits.
|
|
* CLK_GATE_BIG_ENDIAN - by default little endian register accesses are used for
|
|
* the gate register. Setting this flag makes the register accesses big
|
|
* endian.
|
|
*/
|
|
struct clk_gate {
|
|
struct clk_hw hw;
|
|
void __iomem *reg;
|
|
u8 bit_idx;
|
|
u8 flags;
|
|
spinlock_t *lock;
|
|
};
|
|
|
|
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
|
|
|
|
#define CLK_GATE_SET_TO_DISABLE BIT(0)
|
|
#define CLK_GATE_HIWORD_MASK BIT(1)
|
|
#define CLK_GATE_BIG_ENDIAN BIT(2)
|
|
|
|
extern const struct clk_ops clk_gate_ops;
|
|
struct clk *clk_register_gate(struct device *dev, const char *name,
|
|
const char *parent_name, unsigned long flags,
|
|
void __iomem *reg, u8 bit_idx,
|
|
u8 clk_gate_flags, spinlock_t *lock);
|
|
struct clk_hw *clk_hw_register_gate(struct device *dev, const char *name,
|
|
const char *parent_name, unsigned long flags,
|
|
void __iomem *reg, u8 bit_idx,
|
|
u8 clk_gate_flags, spinlock_t *lock);
|
|
void clk_unregister_gate(struct clk *clk);
|
|
void clk_hw_unregister_gate(struct clk_hw *hw);
|
|
int clk_gate_is_enabled(struct clk_hw *hw);
|
|
|
|
struct clk_div_table {
|
|
unsigned int val;
|
|
unsigned int div;
|
|
};
|
|
|
|
/**
|
|
* struct clk_divider - adjustable divider clock
|
|
*
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @reg: register containing the divider
|
|
* @shift: shift to the divider bit field
|
|
* @width: width of the divider bit field
|
|
* @table: array of value/divider pairs, last entry should have div = 0
|
|
* @lock: register lock
|
|
*
|
|
* Clock with an adjustable divider affecting its output frequency. Implements
|
|
* .recalc_rate, .set_rate and .round_rate
|
|
*
|
|
* Flags:
|
|
* CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
|
|
* register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is
|
|
* the raw value read from the register, with the value of zero considered
|
|
* invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
|
|
* CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
|
|
* the hardware register
|
|
* CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have
|
|
* CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
|
|
* Some hardware implementations gracefully handle this case and allow a
|
|
* zero divisor by not modifying their input clock
|
|
* (divide by one / bypass).
|
|
* CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit
|
|
* of this register, and mask of divider bits are in higher 16-bit of this
|
|
* register. While setting the divider bits, higher 16-bit should also be
|
|
* updated to indicate changing divider bits.
|
|
* CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
|
|
* to the closest integer instead of the up one.
|
|
* CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
|
|
* not be changed by the clock framework.
|
|
* CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_ONE_BASED
|
|
* except when the value read from the register is zero, the divisor is
|
|
* 2^width of the field.
|
|
* CLK_DIVIDER_BIG_ENDIAN - By default little endian register accesses are used
|
|
* for the divider register. Setting this flag makes the register accesses
|
|
* big endian.
|
|
*/
|
|
struct clk_divider {
|
|
struct clk_hw hw;
|
|
void __iomem *reg;
|
|
u8 shift;
|
|
u8 width;
|
|
u8 flags;
|
|
const struct clk_div_table *table;
|
|
spinlock_t *lock;
|
|
};
|
|
|
|
#define clk_div_mask(width) ((1 << (width)) - 1)
|
|
#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
|
|
|
|
#define CLK_DIVIDER_ONE_BASED BIT(0)
|
|
#define CLK_DIVIDER_POWER_OF_TWO BIT(1)
|
|
#define CLK_DIVIDER_ALLOW_ZERO BIT(2)
|
|
#define CLK_DIVIDER_HIWORD_MASK BIT(3)
|
|
#define CLK_DIVIDER_ROUND_CLOSEST BIT(4)
|
|
#define CLK_DIVIDER_READ_ONLY BIT(5)
|
|
#define CLK_DIVIDER_MAX_AT_ZERO BIT(6)
|
|
#define CLK_DIVIDER_BIG_ENDIAN BIT(7)
|
|
|
|
extern const struct clk_ops clk_divider_ops;
|
|
extern const struct clk_ops clk_divider_ro_ops;
|
|
|
|
unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate,
|
|
unsigned int val, const struct clk_div_table *table,
|
|
unsigned long flags, unsigned long width);
|
|
long divider_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
|
|
unsigned long rate, unsigned long *prate,
|
|
const struct clk_div_table *table,
|
|
u8 width, unsigned long flags);
|
|
long divider_ro_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
|
|
unsigned long rate, unsigned long *prate,
|
|
const struct clk_div_table *table, u8 width,
|
|
unsigned long flags, unsigned int val);
|
|
int divider_get_val(unsigned long rate, unsigned long parent_rate,
|
|
const struct clk_div_table *table, u8 width,
|
|
unsigned long flags);
|
|
|
|
struct clk *clk_register_divider(struct device *dev, const char *name,
|
|
const char *parent_name, unsigned long flags,
|
|
void __iomem *reg, u8 shift, u8 width,
|
|
u8 clk_divider_flags, spinlock_t *lock);
|
|
struct clk_hw *clk_hw_register_divider(struct device *dev, const char *name,
|
|
const char *parent_name, unsigned long flags,
|
|
void __iomem *reg, u8 shift, u8 width,
|
|
u8 clk_divider_flags, spinlock_t *lock);
|
|
struct clk *clk_register_divider_table(struct device *dev, const char *name,
|
|
const char *parent_name, unsigned long flags,
|
|
void __iomem *reg, u8 shift, u8 width,
|
|
u8 clk_divider_flags, const struct clk_div_table *table,
|
|
spinlock_t *lock);
|
|
struct clk_hw *clk_hw_register_divider_table(struct device *dev,
|
|
const char *name, const char *parent_name, unsigned long flags,
|
|
void __iomem *reg, u8 shift, u8 width,
|
|
u8 clk_divider_flags, const struct clk_div_table *table,
|
|
spinlock_t *lock);
|
|
void clk_unregister_divider(struct clk *clk);
|
|
void clk_hw_unregister_divider(struct clk_hw *hw);
|
|
|
|
/**
|
|
* struct clk_mux - multiplexer clock
|
|
*
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @reg: register controlling multiplexer
|
|
* @table: array of register values corresponding to the parent index
|
|
* @shift: shift to multiplexer bit field
|
|
* @mask: mask of mutliplexer bit field
|
|
* @flags: hardware-specific flags
|
|
* @lock: register lock
|
|
*
|
|
* Clock with multiple selectable parents. Implements .get_parent, .set_parent
|
|
* and .recalc_rate
|
|
*
|
|
* Flags:
|
|
* CLK_MUX_INDEX_ONE - register index starts at 1, not 0
|
|
* CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
|
|
* CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this
|
|
* register, and mask of mux bits are in higher 16-bit of this register.
|
|
* While setting the mux bits, higher 16-bit should also be updated to
|
|
* indicate changing mux bits.
|
|
* CLK_MUX_READ_ONLY - The mux registers can't be written, only read in the
|
|
* .get_parent clk_op.
|
|
* CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
|
|
* frequency.
|
|
* CLK_MUX_BIG_ENDIAN - By default little endian register accesses are used for
|
|
* the mux register. Setting this flag makes the register accesses big
|
|
* endian.
|
|
*/
|
|
struct clk_mux {
|
|
struct clk_hw hw;
|
|
void __iomem *reg;
|
|
u32 *table;
|
|
u32 mask;
|
|
u8 shift;
|
|
u8 flags;
|
|
spinlock_t *lock;
|
|
};
|
|
|
|
#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
|
|
|
|
#define CLK_MUX_INDEX_ONE BIT(0)
|
|
#define CLK_MUX_INDEX_BIT BIT(1)
|
|
#define CLK_MUX_HIWORD_MASK BIT(2)
|
|
#define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */
|
|
#define CLK_MUX_ROUND_CLOSEST BIT(4)
|
|
#define CLK_MUX_BIG_ENDIAN BIT(5)
|
|
|
|
extern const struct clk_ops clk_mux_ops;
|
|
extern const struct clk_ops clk_mux_ro_ops;
|
|
|
|
struct clk *clk_register_mux(struct device *dev, const char *name,
|
|
const char * const *parent_names, u8 num_parents,
|
|
unsigned long flags,
|
|
void __iomem *reg, u8 shift, u8 width,
|
|
u8 clk_mux_flags, spinlock_t *lock);
|
|
struct clk_hw *clk_hw_register_mux(struct device *dev, const char *name,
|
|
const char * const *parent_names, u8 num_parents,
|
|
unsigned long flags,
|
|
void __iomem *reg, u8 shift, u8 width,
|
|
u8 clk_mux_flags, spinlock_t *lock);
|
|
|
|
struct clk *clk_register_mux_table(struct device *dev, const char *name,
|
|
const char * const *parent_names, u8 num_parents,
|
|
unsigned long flags,
|
|
void __iomem *reg, u8 shift, u32 mask,
|
|
u8 clk_mux_flags, u32 *table, spinlock_t *lock);
|
|
struct clk_hw *clk_hw_register_mux_table(struct device *dev, const char *name,
|
|
const char * const *parent_names, u8 num_parents,
|
|
unsigned long flags,
|
|
void __iomem *reg, u8 shift, u32 mask,
|
|
u8 clk_mux_flags, u32 *table, spinlock_t *lock);
|
|
|
|
int clk_mux_val_to_index(struct clk_hw *hw, u32 *table, unsigned int flags,
|
|
unsigned int val);
|
|
unsigned int clk_mux_index_to_val(u32 *table, unsigned int flags, u8 index);
|
|
|
|
void clk_unregister_mux(struct clk *clk);
|
|
void clk_hw_unregister_mux(struct clk_hw *hw);
|
|
|
|
void of_fixed_factor_clk_setup(struct device_node *node);
|
|
|
|
/**
|
|
* struct clk_fixed_factor - fixed multiplier and divider clock
|
|
*
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @mult: multiplier
|
|
* @div: divider
|
|
*
|
|
* Clock with a fixed multiplier and divider. The output frequency is the
|
|
* parent clock rate divided by div and multiplied by mult.
|
|
* Implements .recalc_rate, .set_rate and .round_rate
|
|
*/
|
|
|
|
struct clk_fixed_factor {
|
|
struct clk_hw hw;
|
|
unsigned int mult;
|
|
unsigned int div;
|
|
};
|
|
|
|
#define to_clk_fixed_factor(_hw) container_of(_hw, struct clk_fixed_factor, hw)
|
|
|
|
extern const struct clk_ops clk_fixed_factor_ops;
|
|
struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
|
|
const char *parent_name, unsigned long flags,
|
|
unsigned int mult, unsigned int div);
|
|
void clk_unregister_fixed_factor(struct clk *clk);
|
|
struct clk_hw *clk_hw_register_fixed_factor(struct device *dev,
|
|
const char *name, const char *parent_name, unsigned long flags,
|
|
unsigned int mult, unsigned int div);
|
|
void clk_hw_unregister_fixed_factor(struct clk_hw *hw);
|
|
|
|
/**
|
|
* struct clk_fractional_divider - adjustable fractional divider clock
|
|
*
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @reg: register containing the divider
|
|
* @mshift: shift to the numerator bit field
|
|
* @mwidth: width of the numerator bit field
|
|
* @nshift: shift to the denominator bit field
|
|
* @nwidth: width of the denominator bit field
|
|
* @lock: register lock
|
|
*
|
|
* Clock with adjustable fractional divider affecting its output frequency.
|
|
*
|
|
* Flags:
|
|
* CLK_FRAC_DIVIDER_ZERO_BASED - by default the numerator and denominator
|
|
* is the value read from the register. If CLK_FRAC_DIVIDER_ZERO_BASED
|
|
* is set then the numerator and denominator are both the value read
|
|
* plus one.
|
|
* CLK_FRAC_DIVIDER_BIG_ENDIAN - By default little endian register accesses are
|
|
* used for the divider register. Setting this flag makes the register
|
|
* accesses big endian.
|
|
*/
|
|
struct clk_fractional_divider {
|
|
struct clk_hw hw;
|
|
void __iomem *reg;
|
|
u8 mshift;
|
|
u8 mwidth;
|
|
u32 mmask;
|
|
u8 nshift;
|
|
u8 nwidth;
|
|
u32 nmask;
|
|
u8 flags;
|
|
void (*approximation)(struct clk_hw *hw,
|
|
unsigned long rate, unsigned long *parent_rate,
|
|
unsigned long *m, unsigned long *n);
|
|
spinlock_t *lock;
|
|
};
|
|
|
|
#define to_clk_fd(_hw) container_of(_hw, struct clk_fractional_divider, hw)
|
|
|
|
#define CLK_FRAC_DIVIDER_ZERO_BASED BIT(0)
|
|
#define CLK_FRAC_DIVIDER_BIG_ENDIAN BIT(1)
|
|
|
|
extern const struct clk_ops clk_fractional_divider_ops;
|
|
struct clk *clk_register_fractional_divider(struct device *dev,
|
|
const char *name, const char *parent_name, unsigned long flags,
|
|
void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
|
|
u8 clk_divider_flags, spinlock_t *lock);
|
|
struct clk_hw *clk_hw_register_fractional_divider(struct device *dev,
|
|
const char *name, const char *parent_name, unsigned long flags,
|
|
void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth,
|
|
u8 clk_divider_flags, spinlock_t *lock);
|
|
void clk_hw_unregister_fractional_divider(struct clk_hw *hw);
|
|
|
|
/**
|
|
* struct clk_multiplier - adjustable multiplier clock
|
|
*
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @reg: register containing the multiplier
|
|
* @shift: shift to the multiplier bit field
|
|
* @width: width of the multiplier bit field
|
|
* @lock: register lock
|
|
*
|
|
* Clock with an adjustable multiplier affecting its output frequency.
|
|
* Implements .recalc_rate, .set_rate and .round_rate
|
|
*
|
|
* Flags:
|
|
* CLK_MULTIPLIER_ZERO_BYPASS - By default, the multiplier is the value read
|
|
* from the register, with 0 being a valid value effectively
|
|
* zeroing the output clock rate. If CLK_MULTIPLIER_ZERO_BYPASS is
|
|
* set, then a null multiplier will be considered as a bypass,
|
|
* leaving the parent rate unmodified.
|
|
* CLK_MULTIPLIER_ROUND_CLOSEST - Makes the best calculated divider to be
|
|
* rounded to the closest integer instead of the down one.
|
|
* CLK_MULTIPLIER_BIG_ENDIAN - By default little endian register accesses are
|
|
* used for the multiplier register. Setting this flag makes the register
|
|
* accesses big endian.
|
|
*/
|
|
struct clk_multiplier {
|
|
struct clk_hw hw;
|
|
void __iomem *reg;
|
|
u8 shift;
|
|
u8 width;
|
|
u8 flags;
|
|
spinlock_t *lock;
|
|
};
|
|
|
|
#define to_clk_multiplier(_hw) container_of(_hw, struct clk_multiplier, hw)
|
|
|
|
#define CLK_MULTIPLIER_ZERO_BYPASS BIT(0)
|
|
#define CLK_MULTIPLIER_ROUND_CLOSEST BIT(1)
|
|
#define CLK_MULTIPLIER_BIG_ENDIAN BIT(2)
|
|
|
|
extern const struct clk_ops clk_multiplier_ops;
|
|
|
|
/***
|
|
* struct clk_composite - aggregate clock of mux, divider and gate clocks
|
|
*
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @mux_hw: handle between composite and hardware-specific mux clock
|
|
* @rate_hw: handle between composite and hardware-specific rate clock
|
|
* @gate_hw: handle between composite and hardware-specific gate clock
|
|
* @mux_ops: clock ops for mux
|
|
* @rate_ops: clock ops for rate
|
|
* @gate_ops: clock ops for gate
|
|
*/
|
|
struct clk_composite {
|
|
struct clk_hw hw;
|
|
struct clk_ops ops;
|
|
|
|
struct clk_hw *mux_hw;
|
|
struct clk_hw *rate_hw;
|
|
struct clk_hw *gate_hw;
|
|
|
|
const struct clk_ops *mux_ops;
|
|
const struct clk_ops *rate_ops;
|
|
const struct clk_ops *gate_ops;
|
|
};
|
|
|
|
#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
|
|
|
|
struct clk *clk_register_composite(struct device *dev, const char *name,
|
|
const char * const *parent_names, int num_parents,
|
|
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
|
|
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
|
|
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
|
|
unsigned long flags);
|
|
void clk_unregister_composite(struct clk *clk);
|
|
struct clk_hw *clk_hw_register_composite(struct device *dev, const char *name,
|
|
const char * const *parent_names, int num_parents,
|
|
struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
|
|
struct clk_hw *rate_hw, const struct clk_ops *rate_ops,
|
|
struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
|
|
unsigned long flags);
|
|
void clk_hw_unregister_composite(struct clk_hw *hw);
|
|
|
|
/**
|
|
* struct clk_gpio - gpio gated clock
|
|
*
|
|
* @hw: handle between common and hardware-specific interfaces
|
|
* @gpiod: gpio descriptor
|
|
*
|
|
* Clock with a gpio control for enabling and disabling the parent clock
|
|
* or switching between two parents by asserting or deasserting the gpio.
|
|
*
|
|
* Implements .enable, .disable and .is_enabled or
|
|
* .get_parent, .set_parent and .determine_rate depending on which clk_ops
|
|
* is used.
|
|
*/
|
|
struct clk_gpio {
|
|
struct clk_hw hw;
|
|
struct gpio_desc *gpiod;
|
|
};
|
|
|
|
#define to_clk_gpio(_hw) container_of(_hw, struct clk_gpio, hw)
|
|
|
|
extern const struct clk_ops clk_gpio_gate_ops;
|
|
struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
|
|
const char *parent_name, struct gpio_desc *gpiod,
|
|
unsigned long flags);
|
|
struct clk_hw *clk_hw_register_gpio_gate(struct device *dev, const char *name,
|
|
const char *parent_name, struct gpio_desc *gpiod,
|
|
unsigned long flags);
|
|
void clk_hw_unregister_gpio_gate(struct clk_hw *hw);
|
|
|
|
extern const struct clk_ops clk_gpio_mux_ops;
|
|
struct clk *clk_register_gpio_mux(struct device *dev, const char *name,
|
|
const char * const *parent_names, u8 num_parents, struct gpio_desc *gpiod,
|
|
unsigned long flags);
|
|
struct clk_hw *clk_hw_register_gpio_mux(struct device *dev, const char *name,
|
|
const char * const *parent_names, u8 num_parents, struct gpio_desc *gpiod,
|
|
unsigned long flags);
|
|
void clk_hw_unregister_gpio_mux(struct clk_hw *hw);
|
|
|
|
struct clk *clk_register(struct device *dev, struct clk_hw *hw);
|
|
struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
|
|
|
|
int __must_check clk_hw_register(struct device *dev, struct clk_hw *hw);
|
|
int __must_check devm_clk_hw_register(struct device *dev, struct clk_hw *hw);
|
|
int __must_check of_clk_hw_register(struct device_node *node, struct clk_hw *hw);
|
|
|
|
void clk_unregister(struct clk *clk);
|
|
void devm_clk_unregister(struct device *dev, struct clk *clk);
|
|
|
|
void clk_hw_unregister(struct clk_hw *hw);
|
|
void devm_clk_hw_unregister(struct device *dev, struct clk_hw *hw);
|
|
|
|
/* helper functions */
|
|
const char *__clk_get_name(const struct clk *clk);
|
|
const char *clk_hw_get_name(const struct clk_hw *hw);
|
|
struct clk_hw *__clk_get_hw(struct clk *clk);
|
|
unsigned int clk_hw_get_num_parents(const struct clk_hw *hw);
|
|
struct clk_hw *clk_hw_get_parent(const struct clk_hw *hw);
|
|
struct clk_hw *clk_hw_get_parent_by_index(const struct clk_hw *hw,
|
|
unsigned int index);
|
|
unsigned int __clk_get_enable_count(struct clk *clk);
|
|
unsigned long clk_hw_get_rate(const struct clk_hw *hw);
|
|
unsigned long __clk_get_flags(struct clk *clk);
|
|
unsigned long clk_hw_get_flags(const struct clk_hw *hw);
|
|
#define clk_hw_can_set_rate_parent(hw) \
|
|
(clk_hw_get_flags((hw)) & CLK_SET_RATE_PARENT)
|
|
|
|
bool clk_hw_is_prepared(const struct clk_hw *hw);
|
|
bool clk_hw_rate_is_protected(const struct clk_hw *hw);
|
|
bool clk_hw_is_enabled(const struct clk_hw *hw);
|
|
bool __clk_is_enabled(struct clk *clk);
|
|
struct clk *__clk_lookup(const char *name);
|
|
int __clk_mux_determine_rate(struct clk_hw *hw,
|
|
struct clk_rate_request *req);
|
|
int __clk_determine_rate(struct clk_hw *core, struct clk_rate_request *req);
|
|
int __clk_mux_determine_rate_closest(struct clk_hw *hw,
|
|
struct clk_rate_request *req);
|
|
int clk_mux_determine_rate_flags(struct clk_hw *hw,
|
|
struct clk_rate_request *req,
|
|
unsigned long flags);
|
|
void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent);
|
|
void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
|
|
unsigned long max_rate);
|
|
|
|
static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src)
|
|
{
|
|
dst->clk = src->clk;
|
|
dst->core = src->core;
|
|
}
|
|
|
|
static inline long divider_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate,
|
|
const struct clk_div_table *table,
|
|
u8 width, unsigned long flags)
|
|
{
|
|
return divider_round_rate_parent(hw, clk_hw_get_parent(hw),
|
|
rate, prate, table, width, flags);
|
|
}
|
|
|
|
static inline long divider_ro_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate,
|
|
const struct clk_div_table *table,
|
|
u8 width, unsigned long flags,
|
|
unsigned int val)
|
|
{
|
|
return divider_ro_round_rate_parent(hw, clk_hw_get_parent(hw),
|
|
rate, prate, table, width, flags,
|
|
val);
|
|
}
|
|
|
|
/*
|
|
* FIXME clock api without lock protection
|
|
*/
|
|
unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate);
|
|
|
|
struct of_device_id;
|
|
|
|
struct clk_onecell_data {
|
|
struct clk **clks;
|
|
unsigned int clk_num;
|
|
};
|
|
|
|
struct clk_hw_onecell_data {
|
|
unsigned int num;
|
|
struct clk_hw *hws[];
|
|
};
|
|
|
|
extern struct of_device_id __clk_of_table;
|
|
|
|
#define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn)
|
|
|
|
/*
|
|
* Use this macro when you have a driver that requires two initialization
|
|
* routines, one at of_clk_init(), and one at platform device probe
|
|
*/
|
|
#define CLK_OF_DECLARE_DRIVER(name, compat, fn) \
|
|
static void __init name##_of_clk_init_driver(struct device_node *np) \
|
|
{ \
|
|
of_node_clear_flag(np, OF_POPULATED); \
|
|
fn(np); \
|
|
} \
|
|
OF_DECLARE_1(clk, name, compat, name##_of_clk_init_driver)
|
|
|
|
#define CLK_HW_INIT(_name, _parent, _ops, _flags) \
|
|
(&(struct clk_init_data) { \
|
|
.flags = _flags, \
|
|
.name = _name, \
|
|
.parent_names = (const char *[]) { _parent }, \
|
|
.num_parents = 1, \
|
|
.ops = _ops, \
|
|
})
|
|
|
|
#define CLK_HW_INIT_PARENTS(_name, _parents, _ops, _flags) \
|
|
(&(struct clk_init_data) { \
|
|
.flags = _flags, \
|
|
.name = _name, \
|
|
.parent_names = _parents, \
|
|
.num_parents = ARRAY_SIZE(_parents), \
|
|
.ops = _ops, \
|
|
})
|
|
|
|
#define CLK_HW_INIT_NO_PARENT(_name, _ops, _flags) \
|
|
(&(struct clk_init_data) { \
|
|
.flags = _flags, \
|
|
.name = _name, \
|
|
.parent_names = NULL, \
|
|
.num_parents = 0, \
|
|
.ops = _ops, \
|
|
})
|
|
|
|
#define CLK_FIXED_FACTOR(_struct, _name, _parent, \
|
|
_div, _mult, _flags) \
|
|
struct clk_fixed_factor _struct = { \
|
|
.div = _div, \
|
|
.mult = _mult, \
|
|
.hw.init = CLK_HW_INIT(_name, \
|
|
_parent, \
|
|
&clk_fixed_factor_ops, \
|
|
_flags), \
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
int of_clk_add_provider(struct device_node *np,
|
|
struct clk *(*clk_src_get)(struct of_phandle_args *args,
|
|
void *data),
|
|
void *data);
|
|
int of_clk_add_hw_provider(struct device_node *np,
|
|
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
|
|
void *data),
|
|
void *data);
|
|
int devm_of_clk_add_hw_provider(struct device *dev,
|
|
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
|
|
void *data),
|
|
void *data);
|
|
void of_clk_del_provider(struct device_node *np);
|
|
void devm_of_clk_del_provider(struct device *dev);
|
|
struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec,
|
|
void *data);
|
|
struct clk_hw *of_clk_hw_simple_get(struct of_phandle_args *clkspec,
|
|
void *data);
|
|
struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data);
|
|
struct clk_hw *of_clk_hw_onecell_get(struct of_phandle_args *clkspec,
|
|
void *data);
|
|
int of_clk_parent_fill(struct device_node *np, const char **parents,
|
|
unsigned int size);
|
|
int of_clk_detect_critical(struct device_node *np, int index,
|
|
unsigned long *flags);
|
|
|
|
#else /* !CONFIG_OF */
|
|
|
|
static inline int of_clk_add_provider(struct device_node *np,
|
|
struct clk *(*clk_src_get)(struct of_phandle_args *args,
|
|
void *data),
|
|
void *data)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int of_clk_add_hw_provider(struct device_node *np,
|
|
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
|
|
void *data),
|
|
void *data)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int devm_of_clk_add_hw_provider(struct device *dev,
|
|
struct clk_hw *(*get)(struct of_phandle_args *clkspec,
|
|
void *data),
|
|
void *data)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline void of_clk_del_provider(struct device_node *np) {}
|
|
static inline void devm_of_clk_del_provider(struct device *dev) {}
|
|
static inline struct clk *of_clk_src_simple_get(
|
|
struct of_phandle_args *clkspec, void *data)
|
|
{
|
|
return ERR_PTR(-ENOENT);
|
|
}
|
|
static inline struct clk_hw *
|
|
of_clk_hw_simple_get(struct of_phandle_args *clkspec, void *data)
|
|
{
|
|
return ERR_PTR(-ENOENT);
|
|
}
|
|
static inline struct clk *of_clk_src_onecell_get(
|
|
struct of_phandle_args *clkspec, void *data)
|
|
{
|
|
return ERR_PTR(-ENOENT);
|
|
}
|
|
static inline struct clk_hw *
|
|
of_clk_hw_onecell_get(struct of_phandle_args *clkspec, void *data)
|
|
{
|
|
return ERR_PTR(-ENOENT);
|
|
}
|
|
static inline int of_clk_parent_fill(struct device_node *np,
|
|
const char **parents, unsigned int size)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int of_clk_detect_critical(struct device_node *np, int index,
|
|
unsigned long *flags)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
void clk_gate_restore_context(struct clk_hw *hw);
|
|
|
|
#endif /* CONFIG_COMMON_CLK */
|
|
#endif /* CLK_PROVIDER_H */
|