![Pete Jewell](/assets/img/avatar_default.png)
This is a tiny patch that fixes bttv-cards.c so that Leadtek WinFast VC100 XP video capture cards work. I've been advised to post it here after having already posted it to the v4l mailing list. Acked-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
4348 lines
126 KiB
C
4348 lines
126 KiB
C
/*
|
||
$Id: bttv-cards.c,v 1.47 2005/02/22 14:06:32 kraxel Exp $
|
||
|
||
bttv-cards.c
|
||
|
||
this file has configuration informations - card-specific stuff
|
||
like the big tvcards array for the most part
|
||
|
||
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
|
||
& Marcus Metzler (mocm@thp.uni-koeln.de)
|
||
(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
|
||
|
||
This program is free software; you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation; either version 2 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program; if not, write to the Free Software
|
||
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||
|
||
*/
|
||
|
||
#include <linux/config.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/module.h>
|
||
#include <linux/moduleparam.h>
|
||
#include <linux/kmod.h>
|
||
#include <linux/init.h>
|
||
#include <linux/pci.h>
|
||
#include <linux/vmalloc.h>
|
||
#include <linux/firmware.h>
|
||
|
||
#include <asm/io.h>
|
||
|
||
#include "bttvp.h"
|
||
#if 0 /* not working yet */
|
||
#include "bt832.h"
|
||
#endif
|
||
|
||
/* fwd decl */
|
||
static void boot_msp34xx(struct bttv *btv, int pin);
|
||
static void boot_bt832(struct bttv *btv);
|
||
static void hauppauge_eeprom(struct bttv *btv);
|
||
static void avermedia_eeprom(struct bttv *btv);
|
||
static void osprey_eeprom(struct bttv *btv);
|
||
static void modtec_eeprom(struct bttv *btv);
|
||
static void init_PXC200(struct bttv *btv);
|
||
|
||
static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
|
||
int set);
|
||
static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
|
||
int set);
|
||
static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
|
||
static void rv605_muxsel(struct bttv *btv, unsigned int input);
|
||
static void eagle_muxsel(struct bttv *btv, unsigned int input);
|
||
static void xguard_muxsel(struct bttv *btv, unsigned int input);
|
||
static void ivc120_muxsel(struct bttv *btv, unsigned int input);
|
||
static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
|
||
|
||
static void PXC200_muxsel(struct bttv *btv, unsigned int input);
|
||
|
||
static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
|
||
static void picolo_tetra_init(struct bttv *btv);
|
||
|
||
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
|
||
static void tibetCS16_init(struct bttv *btv);
|
||
|
||
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
|
||
static void kodicom4400r_init(struct bttv *btv);
|
||
|
||
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
|
||
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
|
||
|
||
static int terratec_active_radio_upgrade(struct bttv *btv);
|
||
static int tea5757_read(struct bttv *btv);
|
||
static int tea5757_write(struct bttv *btv, int value);
|
||
static void identify_by_eeprom(struct bttv *btv,
|
||
unsigned char eeprom_data[256]);
|
||
static int __devinit pvr_boot(struct bttv *btv);
|
||
|
||
/* config variables */
|
||
static unsigned int triton1=0;
|
||
static unsigned int vsfx=0;
|
||
static unsigned int latency = UNSET;
|
||
static unsigned int no_overlay=-1;
|
||
|
||
static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
||
static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
||
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
||
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
||
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
||
static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
|
||
#ifdef MODULE
|
||
static unsigned int autoload = 1;
|
||
#else
|
||
static unsigned int autoload = 0;
|
||
#endif
|
||
static unsigned int gpiomask = UNSET;
|
||
static unsigned int audioall = UNSET;
|
||
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
|
||
|
||
/* insmod options */
|
||
module_param(triton1, int, 0444);
|
||
module_param(vsfx, int, 0444);
|
||
module_param(no_overlay, int, 0444);
|
||
module_param(latency, int, 0444);
|
||
module_param(gpiomask, int, 0444);
|
||
module_param(audioall, int, 0444);
|
||
module_param(autoload, int, 0444);
|
||
|
||
module_param_array(card, int, NULL, 0444);
|
||
module_param_array(pll, int, NULL, 0444);
|
||
module_param_array(tuner, int, NULL, 0444);
|
||
module_param_array(svhs, int, NULL, 0444);
|
||
module_param_array(remote, int, NULL, 0444);
|
||
module_param_array(audiomux, int, NULL, 0444);
|
||
|
||
MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
|
||
"[enable bug compatibility for triton1 + others]");
|
||
MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
|
||
"[yet another chipset flaw workaround]");
|
||
MODULE_PARM_DESC(latency,"pci latency timer");
|
||
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
|
||
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
|
||
MODULE_PARM_DESC(tuner,"specify installed tuner type");
|
||
MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* list of card IDs for bt878+ cards */
|
||
|
||
static struct CARD {
|
||
unsigned id;
|
||
int cardnr;
|
||
char *name;
|
||
} cards[] __devinitdata = {
|
||
{ 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" },
|
||
{ 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" },
|
||
{ 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
|
||
{ 0xff000070, BTTV_OSPREY1x0, "Osprey-100" },
|
||
{ 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" },
|
||
{ 0xff020070, BTTV_OSPREY500, "Osprey-500" },
|
||
{ 0xff030070, BTTV_OSPREY2000, "Osprey-2000" },
|
||
{ 0xff040070, BTTV_OSPREY540, "Osprey-540" },
|
||
|
||
{ 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" },
|
||
{ 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
|
||
|
||
{ 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
|
||
{ 0x6607107d, BTTV_WINFASTVC100, "Leadtek WinFast VC 100" },
|
||
{ 0x6609107d, BTTV_WINFAST2000, "Leadtek TV 2000 XP" },
|
||
{ 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
|
||
{ 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
|
||
{ 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
|
||
{ 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
|
||
{ 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
|
||
{ 0xd01810fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
|
||
|
||
{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
|
||
// some cards ship with byteswapped IDs ...
|
||
{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
|
||
{ 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
|
||
// this seems to happen as well ...
|
||
{ 0xff1211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
|
||
|
||
{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
|
||
{ 0x263710b4, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
|
||
{ 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" },
|
||
|
||
{ 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
|
||
{ 0xa005144f, BTTV_MAGICTVIEW063, "CPH06X TView99-Card" },
|
||
{ 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
|
||
{ 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
|
||
{ 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" },
|
||
{ 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" },
|
||
{ 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
|
||
|
||
{ 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
|
||
{ 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" },
|
||
{ 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" },
|
||
{ 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" },
|
||
{ 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
|
||
|
||
{ 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
|
||
{ 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
|
||
{ 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
|
||
{ 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
|
||
|
||
{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
|
||
{ 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
|
||
// clashes with FlyVideo
|
||
//{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" },
|
||
{ 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
|
||
{ 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
|
||
{ 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
|
||
{ 0xff3b153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // ??
|
||
|
||
{ 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
|
||
{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
|
||
{ 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
||
{ 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
||
{ 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
||
|
||
{ 0x1430aa00, BTTV_PV143, "Provideo PV143A" },
|
||
{ 0x1431aa00, BTTV_PV143, "Provideo PV143B" },
|
||
{ 0x1432aa00, BTTV_PV143, "Provideo PV143C" },
|
||
{ 0x1433aa00, BTTV_PV143, "Provideo PV143D" },
|
||
{ 0x1433aa03, BTTV_PV143, "Security Eyes" },
|
||
|
||
{ 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" },
|
||
{ 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" },
|
||
{ 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" },
|
||
{ 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" },
|
||
|
||
{ 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" },
|
||
{ 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" },
|
||
{ 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" },
|
||
{ 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" },
|
||
|
||
{ 0xa132ff00, BTTV_IVC100, "IVC-100" },
|
||
{ 0xa1550000, BTTV_IVC200, "IVC-200" },
|
||
{ 0xa1550001, BTTV_IVC200, "IVC-200" },
|
||
{ 0xa1550002, BTTV_IVC200, "IVC-200" },
|
||
{ 0xa1550003, BTTV_IVC200, "IVC-200" },
|
||
{ 0xa1550100, BTTV_IVC200, "IVC-200G" },
|
||
{ 0xa1550101, BTTV_IVC200, "IVC-200G" },
|
||
{ 0xa1550102, BTTV_IVC200, "IVC-200G" },
|
||
{ 0xa1550103, BTTV_IVC200, "IVC-200G" },
|
||
{ 0xa182ff00, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff01, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff02, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff03, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff04, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff05, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff06, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff07, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff08, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff09, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff0a, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff0b, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff0c, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff0d, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff0e, BTTV_IVC120, "IVC-120G" },
|
||
{ 0xa182ff0f, BTTV_IVC120, "IVC-120G" },
|
||
|
||
{ 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" },
|
||
{ 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" },
|
||
|
||
{ 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
|
||
{ 0xa0501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
|
||
{ 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
|
||
{ 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
|
||
{ 0x41a0a051, BTTV_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
|
||
{ 0x18501f7f, BTTV_FLYVIDEO_98, "Lifeview Flyvideo 98" },
|
||
|
||
{ 0x010115cb, BTTV_GMV1, "AG GMV1" },
|
||
{ 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
|
||
|
||
{ 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" },
|
||
{ 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
|
||
{ 0xfff6f6ff, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" },
|
||
{ 0x03116000, BTTV_SENSORAY311, "Sensoray 311" },
|
||
{ 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" },
|
||
{ 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" },
|
||
{ 0x20007063, BTTV_PC_HDTV, "pcHDTV HD-2000 TV"},
|
||
{ 0x82b2aa6a, BTTV_SIMUS_GVC1100, "SIMUS GVC1100" },
|
||
{ 0x146caa0c, BTTV_PV951, "ituner spectra8" },
|
||
{ 0x200a1295, BTTV_PXC200, "ImageNation PXC200A" },
|
||
|
||
{ 0x40111554, BTTV_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
|
||
{ 0x17de0a01, BTTV_KWORLD, "Mecer TV/FM/Video Tuner" },
|
||
|
||
{ 0x01051805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
|
||
{ 0x01061805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
|
||
{ 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
|
||
{ 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
|
||
|
||
// likely broken, vendor id doesn't match the other magic views ...
|
||
//{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
|
||
|
||
// DVB cards (using pci function .1 for mpeg data xfer)
|
||
{ 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
|
||
{ 0x07611461, BTTV_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
|
||
{ 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
|
||
{ 0x002611bd, BTTV_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
|
||
{ 0x00011822, BTTV_TWINHAN_DST, "Twinhan VisionPlus DVB" },
|
||
{ 0xfc00270f, BTTV_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
|
||
{ 0x07711461, BTTV_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
|
||
{ 0xdb1018ac, BTTV_DVICO_DVBT_LITE, "DVICO FusionHDTV DVB-T Lite" },
|
||
|
||
{ 0, -1, NULL }
|
||
};
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* array with description for bt848 / bt878 tv/grabber cards */
|
||
|
||
struct tvcard bttv_tvcards[] = {
|
||
{
|
||
/* ---- card 0x00 ---------------------------------- */
|
||
.name = " *** UNKNOWN/GENERIC *** ",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "MIRO PCTV",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 15,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 2, 0, 0, 0, 10},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Hauppauge (bt848)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 1, 2, 3, 4},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "STB, Gateway P/N 6000699 (bt848)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 4, 0, 2, 3, 1},
|
||
.no_msp34xx = 1,
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = TUNER_PHILIPS_NTSC,
|
||
.pll = PLL_28,
|
||
.has_radio = 1,
|
||
},{
|
||
|
||
/* ---- card 0x04 ---------------------------------- */
|
||
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 2,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0 },
|
||
.needs_tvaudio = 0,
|
||
.tuner_type = 4,
|
||
},{
|
||
.name = "Diamond DTV2000",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 3,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.audiomux = { 0, 1, 0, 1, 3},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "AVerMedia TVPhone",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 3,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.gpiomask = 0x0f,
|
||
.audiomux = { 0x0c, 0x04, 0x08, 0x04, 0},
|
||
/* 0x04 for some cards ?? */
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
.audio_hook = avermedia_tvphone_audio,
|
||
.has_remote = 1,
|
||
},{
|
||
.name = "MATRIX-Vision MV-Delta",
|
||
.video_inputs = 5,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = 3,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 0, 0},
|
||
.audiomux = {0 },
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x08 ---------------------------------- */
|
||
.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xc00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "IMS/IXmicro TurboTV",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 3,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 1, 1, 2, 3, 0},
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_TEMIC_PAL,
|
||
},{
|
||
.name = "Hauppauge (bt878)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x0f, /* old: 7 */
|
||
.muxsel = { 2, 0, 1, 1},
|
||
.audiomux = { 0, 1, 2, 3, 4},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "MIRO PCTV pro",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x3014f,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0x20001,0x10001, 0, 0,10},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x0c ---------------------------------- */
|
||
.name = "ADS Technologies Channel Surfer TV (bt848)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 15,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 13, 14, 11, 7, 0, 0},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "AVerMedia TVCapture 98",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 4,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 15,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 13, 14, 11, 7, 0, 0},
|
||
.needs_tvaudio = 1,
|
||
.msp34xx_alt = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.audio_hook = avermedia_tv_stereo_audio,
|
||
},{
|
||
.name = "Aimslab Video Highway Xtreme (VHX)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Zoltrix TV-Max",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 15,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = {0 , 0, 1 , 0, 10},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x10 ---------------------------------- */
|
||
.name = "Prolink Pixelview PlayTV (bt878)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x01fe00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
#if 0
|
||
// old
|
||
.audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
|
||
#else
|
||
// 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru>
|
||
.audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
|
||
#endif
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Leadtek WinView 601",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x8300f8,
|
||
.muxsel = { 2, 3, 1, 1,0},
|
||
.audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
.audio_hook = winview_audio,
|
||
.has_radio = 1,
|
||
},{
|
||
.name = "AVEC Intercapture",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 2,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0,
|
||
.muxsel = {2, 3, 1, 1},
|
||
.audiomux = {1, 0, 0, 0, 0},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0x8dff00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0 },
|
||
.no_msp34xx = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x14 ---------------------------------- */
|
||
.name = "CEI Raffles Card",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 3,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.muxsel = {2, 3, 1, 1},
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 2, // tuner, line in
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1800,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL_I,
|
||
},{
|
||
.name = "Askey CPH050/ Phoebe Tv Master + FM",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xc00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = {0, 1, 0x800, 0x400, 0xc00, 0},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = -1,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 3, -1 },
|
||
.digital_mode = DIGITAL_MODE_CAMERA,
|
||
.audiomux = { 0, 0, 0, 0, 0 },
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
|
||
},{
|
||
|
||
/* ---- card 0x18 ---------------------------------- */
|
||
.name = "Askey CPH05X/06X (bt878) [many vendors]",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xe00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.has_remote = 1,
|
||
},{
|
||
.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1f0fff,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
|
||
.needs_tvaudio = 0,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.audio_hook = terratv_audio,
|
||
},{
|
||
.name = "Hauppauge WinCam newer (bt878)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 3,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 0, 1, 1},
|
||
.audiomux = { 0, 1, 2, 3, 4},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 2,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1800,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_SECAM,
|
||
},{
|
||
|
||
/* ---- card 0x1c ---------------------------------- */
|
||
.name = "Terratec TerraTV+ Version 1.1 (bt878)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1f0fff,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
|
||
.needs_tvaudio = 0,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.audio_hook = terratv_audio,
|
||
/* GPIO wiring:
|
||
External 20 pin connector (for Active Radio Upgrade board)
|
||
gpio00: i2c-sda
|
||
gpio01: i2c-scl
|
||
gpio02: om5610-data
|
||
gpio03: om5610-clk
|
||
gpio04: om5610-wre
|
||
gpio05: om5610-stereo
|
||
gpio06: rds6588-davn
|
||
gpio07: Pin 7 n.c.
|
||
gpio08: nIOW
|
||
gpio09+10: nIOR, nSEL ?? (bt878)
|
||
gpio09: nIOR (bt848)
|
||
gpio10: nSEL (bt848)
|
||
Sound Routing:
|
||
gpio16: u2-A0 (1st 4052bt)
|
||
gpio17: u2-A1
|
||
gpio18: u2-nEN
|
||
gpio19: u4-A0 (2nd 4052)
|
||
gpio20: u4-A1
|
||
u4-nEN - GND
|
||
Btspy:
|
||
00000 : Cdrom (internal audio input)
|
||
10000 : ext. Video audio input
|
||
20000 : TV Mono
|
||
a0000 : TV Mono/2
|
||
1a0000 : TV Stereo
|
||
30000 : Radio
|
||
40000 : Mute
|
||
*/
|
||
|
||
},{
|
||
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
|
||
.name = "Imagenation PXC200",
|
||
.video_inputs = 5,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = 1, /* was: 4 */
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 0, 0},
|
||
.audiomux = { 0 },
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = -1,
|
||
.muxsel_hook = PXC200_muxsel,
|
||
|
||
},{
|
||
.name = "Lifeview FlyVideo 98 LR50",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1800, //0x8dfe00
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Formac iProTV, Formac ProTV I (bt848)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 3,
|
||
.gpiomask = 1,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 1, 0, 0, 0, 0 },
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
},{
|
||
|
||
/* ---- card 0x20 ---------------------------------- */
|
||
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 2,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0 },
|
||
.needs_tvaudio = 0,
|
||
.tuner_type = 4,
|
||
},{
|
||
.name = "Terratec TerraTValue Version Bt878",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xffff00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0x500, 0, 0x300, 0x900, 0x900},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
},{
|
||
.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
|
||
#if 0
|
||
.gpiomask = 0xc33000,
|
||
.audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
|
||
#else
|
||
/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
|
||
.gpiomask = 0xb33000,
|
||
.audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
|
||
#endif
|
||
/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
|
||
gpio23 -- hef4052:nEnable (0x800000)
|
||
gpio12 -- hef4052:A1
|
||
gpio13 -- hef4052:A0
|
||
0x0000: external audio
|
||
0x1000: FM
|
||
0x2000: TV
|
||
0x3000: n.c.
|
||
Note: There exists another variant "Winfast 2000" with tv stereo !?
|
||
Note: eeprom only contains FF and pci subsystem id 107d:6606
|
||
*/
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.has_radio = 1,
|
||
.tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
|
||
.audio_hook = winfast2000_audio,
|
||
.has_remote = 1,
|
||
},{
|
||
.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 3,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1800,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x24 ---------------------------------- */
|
||
.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 3,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1800,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.has_radio = 1,
|
||
},{
|
||
.name = "Prolink PixelView PlayTV pro",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xff,
|
||
.muxsel = { 2, 3, 1, 1 },
|
||
.audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 },
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Askey CPH06X TView99",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x551e00,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 },
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 1,
|
||
.has_remote = 1,
|
||
},{
|
||
.name = "Pinnacle PCTV Studio/Rave",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x03000F,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 2, 0xd0001, 0, 0, 1},
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x28 ---------------------------------- */
|
||
.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 4, 0, 2, 3, 1},
|
||
.no_msp34xx = 1,
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = TUNER_PHILIPS_NTSC,
|
||
.pll = PLL_28,
|
||
.has_radio = 1,
|
||
},{
|
||
.name = "AVerMedia TVPhone 98",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 4,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 15,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 13, 4, 11, 7, 0, 0},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.has_radio = 1,
|
||
.audio_hook = avermedia_tvphone_audio,
|
||
},{
|
||
.name = "ProVideo PV951", /* pic16c54 */
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0, 0, 0, 0},
|
||
.needs_tvaudio = 1,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 1,
|
||
},{
|
||
.name = "Little OnAir TV",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xe00b,
|
||
.muxsel = {2, 3, 1, 1},
|
||
.audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
|
||
.no_msp34xx = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x2c ---------------------------------- */
|
||
.name = "Sigma TVII-FM",
|
||
.video_inputs = 2,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = -1,
|
||
.gpiomask = 3,
|
||
.muxsel = {2, 3, 1, 1},
|
||
.audiomux = {1, 1, 0, 2, 3},
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_NONE,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "MATRIX-Vision MV-Delta 2",
|
||
.video_inputs = 5,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = 3,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 0, 0},
|
||
.audiomux = {0 },
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Zoltrix Genie TV/FM",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xbcf03f,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f},
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 21,
|
||
},{
|
||
.name = "Terratec TV/Radio+",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x70000,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 },
|
||
.needs_tvaudio = 1,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_35,
|
||
.tuner_type = 1,
|
||
.has_radio = 1,
|
||
},{
|
||
|
||
/* ---- card 0x30 ---------------------------------- */
|
||
.name = "Askey CPH03x/ Dynalink Magic TView",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 15,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = {2,0,0,0,1},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "IODATA GV-BCTV3/PCI",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x010f00,
|
||
.muxsel = {2, 3, 0, 0},
|
||
.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_ALPS_TSHC6_NTSC,
|
||
.audio_hook = gvbctv3pci_audio,
|
||
},{
|
||
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
|
||
.video_inputs = 5,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 3,
|
||
.gpiomask = 0xAA0000,
|
||
.muxsel = { 2,3,1,1,-1 },
|
||
.digital_mode = DIGITAL_MODE_CAMERA,
|
||
.audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 },
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL_I,
|
||
.has_remote = 1,
|
||
/* GPIO wiring: (different from Rev.4C !)
|
||
GPIO17: U4.A0 (first hef4052bt)
|
||
GPIO19: U4.A1
|
||
GPIO20: U5.A1 (second hef4052bt)
|
||
GPIO21: U4.nEN
|
||
GPIO22: BT832 Reset Line
|
||
GPIO23: A5,A0, U5,nEN
|
||
Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
|
||
*/
|
||
},{
|
||
.name = "Eagle Wireless Capricorn2 (bt878A)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 0, 1, 1},
|
||
.audiomux = { 0, 1, 2, 3, 4},
|
||
.pll = PLL_28,
|
||
.tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
|
||
},{
|
||
|
||
/* ---- card 0x34 ---------------------------------- */
|
||
/* David H<>rdeman <david@2gen.com> */
|
||
.name = "Pinnacle PCTV Studio Pro",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 3,
|
||
.gpiomask = 0x03000F,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 1, 0xd0001, 0, 0, 10},
|
||
/* sound path (5 sources):
|
||
MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
|
||
0= ext. Audio IN
|
||
1= from MUX2
|
||
2= Mono TV sound from Tuner
|
||
3= not connected
|
||
MUX2 (mask 0x30000):
|
||
0,2,3= from MSP34xx
|
||
1= FM stereo Radio from Tuner */
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* Claas Langbehn <claas@bigfoot.com>,
|
||
Sven Grothklags <sven@upb.de> */
|
||
.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 3,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1c,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0, 0x10, 8, 4 },
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.has_radio = 1,
|
||
},{
|
||
/* Tim R<>stermundt <rosterm@uni-muenster.de>
|
||
in de.comp.os.unix.linux.hardware:
|
||
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
|
||
audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
|
||
options tuner type=5 */
|
||
.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x18e0,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
|
||
/* For cards with tda9820/tda9821:
|
||
0x0000: Tuner normal stereo
|
||
0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
|
||
0x0880: Tuner A2 stereo */
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* Miguel Angel Alvarez <maacruz@navegalia.com>
|
||
old Easy TV BT848 version (model CPH031) */
|
||
.name = "Askey CPH031/ BESTBUY Easy TV",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xF,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.audiomux = { 2, 0, 0, 0, 10},
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_TEMIC_PAL,
|
||
},{
|
||
|
||
/* ---- card 0x38 ---------------------------------- */
|
||
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
|
||
.name = "Lifeview FlyVideo 98FM LR50",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 3,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1800,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
|
||
.pll = PLL_28,
|
||
.tuner_type = 5,
|
||
},{
|
||
/* This is the ultimate cheapo capture card
|
||
* just a BT848A on a small PCB!
|
||
* Steve Hosgood <steve@equiinet.com> */
|
||
.name = "GrandTec 'Grand Video Capture' (Bt848)",
|
||
.video_inputs = 2,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.gpiomask = 0,
|
||
.muxsel = { 3, 1 },
|
||
.audiomux = { 0 },
|
||
.needs_tvaudio = 0,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_35,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* Daniel Herrington <daniel.herrington@home.com> */
|
||
.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xe00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
|
||
},{
|
||
/* Matti Mottus <mottus@physic.ut.ee> */
|
||
.name = "Askey CPH03x TV Capturer",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x03000F,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.audiomux = { 2,0,0,0,1 },
|
||
.pll = PLL_28,
|
||
.tuner_type = 0,
|
||
},{
|
||
|
||
/* ---- card 0x3c ---------------------------------- */
|
||
/* Philip Blundell <philb@gnu.org> */
|
||
.name = "Modular Technology MM100PCTV",
|
||
.video_inputs = 2,
|
||
.audio_inputs = 2,
|
||
.tuner = 0,
|
||
.svhs = -1,
|
||
.gpiomask = 11,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 2, 0, 0, 1, 8},
|
||
.pll = PLL_35,
|
||
.tuner_type = TUNER_TEMIC_PAL,
|
||
|
||
},{
|
||
/* Adrian Cox <adrian@humboldt.co.uk */
|
||
.name = "AG Electronics GMV1",
|
||
.video_inputs = 2,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.gpiomask = 0xF,
|
||
.muxsel = { 2, 2},
|
||
.audiomux = { },
|
||
.no_msp34xx = 1,
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* Miguel Angel Alvarez <maacruz@navegalia.com>
|
||
new Easy TV BT878 version (model CPH061)
|
||
special thanks to Informatica Mieres for providing the card */
|
||
.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 2,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xFF,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.audiomux = { 1, 0, 4, 4, 9},
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
},{
|
||
/* Lukas Gebauer <geby@volny.cz> */
|
||
.name = "ATI TV-Wonder",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xf03f,
|
||
.muxsel = { 2, 3, 1, 0 },
|
||
.audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
|
||
},{
|
||
|
||
/* ---- card 0x40 ---------------------------------- */
|
||
/* Lukas Gebauer <geby@volny.cz> */
|
||
.name = "ATI TV-Wonder VE",
|
||
.video_inputs = 2,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = -1,
|
||
.gpiomask = 1,
|
||
.muxsel = { 2, 3, 0, 1},
|
||
.audiomux = { 0, 0, 1, 0, 0},
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
|
||
},{
|
||
/* DeeJay <deejay@westel900.net (2000S) */
|
||
.name = "Lifeview FlyVideo 2000S LR90",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 3,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x18e0,
|
||
.muxsel = { 2, 3, 0, 1},
|
||
/* Radio changed from 1e80 to 0x800 to make
|
||
FlyVideo2000S in .hu happy (gm)*/
|
||
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
|
||
.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
|
||
.audio_hook = fv2000s_audio,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 5,
|
||
},{
|
||
.name = "Terratec TValueRadio",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0xffff00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.has_radio = 1,
|
||
},{
|
||
/* TANAKA Kei <peg00625@nifty.com> */
|
||
.name = "IODATA GV-BCTV4/PCI",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x010f00,
|
||
.muxsel = {2, 3, 0, 0},
|
||
.audiomux = {0x10000, 0, 0x10000, 0, 0, 0},
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
|
||
.audio_hook = gvbctv3pci_audio,
|
||
},{
|
||
|
||
/* ---- card 0x44 ---------------------------------- */
|
||
.name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
|
||
// try "insmod msp3400 simple=0" if you have
|
||
// sound problems with this card.
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = -1,
|
||
.gpiomask = 0x4f8a00,
|
||
// 0x100000: 1=MSP enabled (0=disable again)
|
||
// 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
|
||
.audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
|
||
// tvtuner, radio, external,internal, mute, stereo
|
||
/* tuner, Composit, SVid, Composit-on-Svid-adapter*/
|
||
.muxsel = { 2, 3 ,0 ,1},
|
||
.tuner_type = TUNER_MT2032,
|
||
.pll = PLL_28,
|
||
.has_radio = 1,
|
||
},{
|
||
/* Philip Blundell <pb@nexus.co.uk> */
|
||
.name = "Active Imaging AIMMS",
|
||
.video_inputs = 1,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.tuner_type = -1,
|
||
.pll = PLL_28,
|
||
.muxsel = { 2 },
|
||
.gpiomask = 0
|
||
},{
|
||
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
|
||
.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 4,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 15,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 25,
|
||
.has_remote = 1,
|
||
/* GPIO wiring:
|
||
GPIO0: U4.A0 (hef4052bt)
|
||
GPIO1: U4.A1
|
||
GPIO2: U4.A1 (second hef4052bt)
|
||
GPIO3: U4.nEN, U5.A0, A5.nEN
|
||
GPIO8-15: vrd866b ?
|
||
*/
|
||
},{
|
||
.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 2,
|
||
.muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
|
||
.pll = PLL_28,
|
||
.no_msp34xx = 1,
|
||
},{
|
||
|
||
/* ---- card 0x48 ---------------------------------- */
|
||
/* Dariusz Kowalewski <darekk@automex.pl> */
|
||
.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x3f,
|
||
.muxsel = { 2, 3, 1, 1 },
|
||
.audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 },
|
||
.needs_tvaudio = 1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 5,
|
||
.audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo
|
||
.has_radio = 1, // Note: not all cards have radio
|
||
.has_remote = 1,
|
||
/* GPIO wiring:
|
||
GPIO0: A0 hef4052
|
||
GPIO1: A1 hef4052
|
||
GPIO3: nEN hef4052
|
||
GPIO8-15: vrd866b
|
||
GPIO20,22,23: R30,R29,R28
|
||
*/
|
||
},{
|
||
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
|
||
/* you must jumper JP5 for the card to work */
|
||
.name = "Sensoray 311",
|
||
.video_inputs = 5,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 4,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 0, 0},
|
||
.audiomux = { 0 },
|
||
.needs_tvaudio = 0,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
|
||
.name = "RemoteVision MX (RV605)",
|
||
.video_inputs = 16,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0x00,
|
||
.gpiomask2 = 0x07ff,
|
||
.muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
|
||
0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.tuner_type = -1,
|
||
.muxsel_hook = rv605_muxsel,
|
||
},{
|
||
.name = "Powercolor MTV878/ MTV878R/ MTV878F",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 2,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
|
||
.muxsel = { 2, 1, 1, },
|
||
.audiomux = { 0, 1, 2, 2, 4 },
|
||
.needs_tvaudio = 0,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.pll = PLL_28,
|
||
.has_radio = 1,
|
||
},{
|
||
|
||
/* ---- card 0x4c ---------------------------------- */
|
||
/* Masaki Suzuki <masaki@btree.org> */
|
||
.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x140007,
|
||
.muxsel = { 2, 3, 1, 1 },
|
||
.audiomux = { 0, 1, 2, 3, 4, 0 },
|
||
.tuner_type = TUNER_PHILIPS_NTSC,
|
||
.audio_hook = windvr_audio,
|
||
},{
|
||
.name = "GrandTec Multi Capture Card (Bt878)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 0 },
|
||
.audiomux = { 0 },
|
||
.needs_tvaudio = 0,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 3,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector
|
||
.audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
|
||
// This card lacks external Audio In, so we mute it on Ext. & Int.
|
||
// The PCB can take a sbx1637/sbx1673, wiring unknown.
|
||
// This card lacks PCI subsystem ID, sigh.
|
||
// audiomux=1: lower volume, 2+3: mute
|
||
// btwincap uses 0x80000/0x80003
|
||
.needs_tvaudio = 0,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
|
||
// radio signal strength indicators work fine.
|
||
.has_radio = 1,
|
||
/* GPIO Info:
|
||
GPIO0,1: HEF4052 A0,A1
|
||
GPIO2: HEF4052 nENABLE
|
||
GPIO3-7: n.c.
|
||
GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
|
||
GPIO14,15: ??
|
||
GPIO16-21: n.c.
|
||
GPIO22,23: ??
|
||
?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
|
||
},{
|
||
/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
|
||
.name = "DSP Design TCVIDEO",
|
||
.video_inputs = 4,
|
||
.svhs = -1,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x50 ---------------------------------- */
|
||
.name = "Hauppauge WinTV PVR",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.muxsel = { 2, 0, 1, 1},
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
|
||
.gpiomask = 7,
|
||
.audiomux = {7},
|
||
},{
|
||
.name = "IODATA GV-BCTV5/PCI",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x0f0f80,
|
||
.muxsel = {2, 3, 1, 0},
|
||
.audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0},
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_NTSC_M,
|
||
.audio_hook = gvbctv5pci_audio,
|
||
.has_radio = 1,
|
||
},{
|
||
.name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
|
||
.video_inputs = 4, /* id-inputs-clock */
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 3,
|
||
.muxsel = { 3, 2, 0, 1 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
|
||
.video_inputs = 3,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 2,
|
||
.muxsel = { 2, 3, 1 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
|
||
/* ---- card 0x54 ---------------------------------- */
|
||
.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
|
||
.video_inputs = 2,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.muxsel = { 3, 1 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
.name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
|
||
.video_inputs = 1,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.muxsel = { 0 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
.name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
|
||
.video_inputs = 2,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.muxsel = { 0, 1 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
.name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
|
||
.video_inputs = 1,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.muxsel = { 0 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
|
||
/* ---- card 0x58 ---------------------------------- */
|
||
.name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
|
||
.video_inputs = 2,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.muxsel = { 0, 1 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
.name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
|
||
.video_inputs = 2,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.muxsel = { 2, 3 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
.name = "Osprey 500", /* 500 */
|
||
.video_inputs = 2,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.muxsel = { 2, 3 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
},{
|
||
.name = "Osprey 540", /* 540 */
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
#if 0 /* TODO ... */
|
||
.svhs = OSPREY540_SVID_ANALOG,
|
||
.muxsel = { [OSPREY540_COMP_ANALOG] = 2,
|
||
[OSPREY540_SVID_ANALOG] = 3, },
|
||
#endif
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
#if 0 /* TODO ... */
|
||
.muxsel_hook = osprey_540_muxsel,
|
||
.picture_hook = osprey_540_set_picture,
|
||
#endif
|
||
},{
|
||
|
||
/* ---- card 0x5C ---------------------------------- */
|
||
.name = "Osprey 2000", /* 2000 */
|
||
.video_inputs = 2,
|
||
.audio_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.muxsel = { 2, 3 },
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
|
||
},{
|
||
/* M G Berberich <berberic@forwiss.uni-passau.de> */
|
||
.name = "IDS Eagle",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.tuner_type = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0,
|
||
.muxsel = { 0, 1, 2, 3 },
|
||
.muxsel_hook = eagle_muxsel,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.pll = PLL_28,
|
||
},{
|
||
.name = "Pinnacle PCTV Sat",
|
||
.video_inputs = 2,
|
||
.audio_inputs = 0,
|
||
.svhs = 1,
|
||
.tuner = -1,
|
||
.tuner_type = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.gpiomask = 0x01,
|
||
.audiomux = { 0, 0, 0, 0, 1 },
|
||
.muxsel = { 3, 0, 1, 2},
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.no_gpioirq = 1,
|
||
.has_dvb = 1,
|
||
},{
|
||
.name = "Formac ProTV II (bt878)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 3,
|
||
.gpiomask = 2,
|
||
// TV, Comp1, Composite over SVID con, SVID
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 2, 2, 0, 0, 0 },
|
||
.pll = PLL_28,
|
||
.has_radio = 1,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
/* sound routing:
|
||
GPIO=0x00,0x01,0x03: mute (?)
|
||
0x02: both TV and radio (tuner: FM1216/I)
|
||
The card has onboard audio connectors labeled "cdrom" and "board",
|
||
not soldered here, though unknown wiring.
|
||
Card lacks: external audio in, pci subsystem id.
|
||
*/
|
||
},{
|
||
|
||
/* ---- card 0x60 ---------------------------------- */
|
||
.name = "MachTV",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = -1,
|
||
.gpiomask = 7,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 1, 2, 3, 4},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = 5,
|
||
.pll = 1,
|
||
},{
|
||
.name = "Euresys Picolo",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = 2,
|
||
.gpiomask = 0,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.muxsel = { 2, 0, 1},
|
||
.pll = PLL_28,
|
||
},{
|
||
/* Luc Van Hoeylandt <luc@e-magic.be> */
|
||
.name = "ProVideo PV150", /* 0x4f */
|
||
.video_inputs = 2,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3 },
|
||
.audiomux = { 0 },
|
||
.needs_tvaudio = 0,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* Hiroshi Takekawa <sian@big.or.jp> */
|
||
/* This card lacks subsystem ID */
|
||
.name = "AD-TVK503", /* 0x63 */
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x001e8007,
|
||
.muxsel = { 2, 3, 1, 0 },
|
||
/* Tuner, Radio, external, internal, off, on */
|
||
.audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 },
|
||
.needs_tvaudio = 0,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 2,
|
||
.audio_hook = adtvk503_audio,
|
||
},{
|
||
|
||
/* ---- card 0x64 ---------------------------------- */
|
||
.name = "Hercules Smart TV Stereo",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x00,
|
||
.muxsel = { 2, 3, 1, 1 },
|
||
.needs_tvaudio = 1,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = 5,
|
||
/* Notes:
|
||
- card lacks subsystem ID
|
||
- stereo variant w/ daughter board with tda9874a @0xb0
|
||
- Audio Routing:
|
||
always from tda9874 independent of GPIO (?)
|
||
external line in: unknown
|
||
- Other chips: em78p156elp @ 0x96 (probably IR remote control)
|
||
hef4053 (instead 4052) for unknown function
|
||
*/
|
||
},{
|
||
.name = "Pace TV & Radio Card",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
|
||
.gpiomask = 0,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.tuner_type = 1,
|
||
.has_radio = 1,
|
||
.pll = PLL_28,
|
||
/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
|
||
only internal line out: (4pin header) RGGL
|
||
Radio must be decoded by msp3410d (not routed through)*/
|
||
// .digital_mode = DIGITAL_MODE_CAMERA, // todo!
|
||
},{
|
||
/* Chris Willing <chris@vislab.usyd.edu.au> */
|
||
.name = "IVC-200",
|
||
.video_inputs = 1,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.tuner_type = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0xdf,
|
||
.muxsel = { 2 },
|
||
.pll = PLL_28,
|
||
},{
|
||
.name = "Grand X-Guard / Trust 814PCI",
|
||
.video_inputs = 16,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.tuner_type = 4,
|
||
.gpiomask2 = 0xff,
|
||
.muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
|
||
.muxsel_hook = xguard_muxsel,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.pll = PLL_28,
|
||
},{
|
||
|
||
/* ---- card 0x68 ---------------------------------- */
|
||
.name = "Nebula Electronics DigiTV",
|
||
.video_inputs = 1,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.has_dvb = 1,
|
||
.no_gpioirq = 1,
|
||
},{
|
||
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
|
||
.name = "ProVideo PV143",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0,
|
||
.muxsel = { 2, 3, 1, 0 },
|
||
.audiomux = { 0 },
|
||
.needs_tvaudio = 0,
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* M.Klahr@phytec.de */
|
||
.name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1, /* card has no tuner */
|
||
.svhs = 3,
|
||
.gpiomask = 0x00,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "PHYTEC VD-009-X1 Combi (bt878)",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1, /* card has no tuner */
|
||
.svhs = 3,
|
||
.gpiomask = 0x00,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
|
||
/* ---- card 0x6c ---------------------------------- */
|
||
.name = "PHYTEC VD-009 MiniDIN (bt878)",
|
||
.video_inputs = 10,
|
||
.audio_inputs = 0,
|
||
.tuner = -1, /* card has no tuner */
|
||
.svhs = 9,
|
||
.gpiomask = 0x00,
|
||
.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
|
||
via the upper nibble of muxsel. here: used for
|
||
xternal video-mux */
|
||
.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
|
||
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "PHYTEC VD-009 Combi (bt878)",
|
||
.video_inputs = 10,
|
||
.audio_inputs = 0,
|
||
.tuner = -1, /* card has no tuner */
|
||
.svhs = 9,
|
||
.gpiomask = 0x00,
|
||
.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
|
||
via the upper nibble of muxsel. here: used for
|
||
xternal video-mux */
|
||
.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
|
||
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
||
.needs_tvaudio = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
.name = "IVC-100",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.tuner_type = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0xdf,
|
||
.muxsel = { 2, 3, 1, 0 },
|
||
.pll = PLL_28,
|
||
},{
|
||
/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
|
||
.name = "IVC-120G",
|
||
.video_inputs = 16,
|
||
.audio_inputs = 0, /* card has no audio */
|
||
.tuner = -1, /* card has no tuner */
|
||
.tuner_type = -1,
|
||
.svhs = -1, /* card has no svhs */
|
||
.needs_tvaudio = 0,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.gpiomask = 0x00,
|
||
.muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
|
||
0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
|
||
.muxsel_hook = ivc120_muxsel,
|
||
.pll = PLL_28,
|
||
},{
|
||
|
||
/* ---- card 0x70 ---------------------------------- */
|
||
.name = "pcHDTV HD-2000 TV",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.tuner_type = TUNER_PHILIPS_ATSC,
|
||
.has_dvb = 1,
|
||
},{
|
||
.name = "Twinhan DST + clones",
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.tuner_type = TUNER_ABSENT,
|
||
.no_video = 1,
|
||
.has_dvb = 1,
|
||
},{
|
||
.name = "Winfast VC100",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 0,
|
||
.svhs = 1,
|
||
.tuner = -1, // no tuner
|
||
.muxsel = { 3, 1, 1, 3}, // Vid In, SVid In, Vid over SVid in connector
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.tuner_type = TUNER_ABSENT,
|
||
.pll = PLL_28,
|
||
},{
|
||
.name = "Teppro TEV-560/InterVision IV-560",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 3,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 1, 1, 1, 1, 0},
|
||
.needs_tvaudio = 1,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.pll = PLL_35,
|
||
},{
|
||
|
||
/* ---- card 0x74 ---------------------------------- */
|
||
.name = "SIMUS GVC1100",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.tuner_type = -1,
|
||
.pll = PLL_28,
|
||
.muxsel = { 2, 2, 2, 2},
|
||
.gpiomask = 0x3F,
|
||
.muxsel_hook = gvc1100_muxsel,
|
||
},{
|
||
/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
|
||
.name = "NGS NGSTV+",
|
||
.video_inputs = 3,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x008007,
|
||
.muxsel = {2, 3, 0, 0},
|
||
.audiomux = {0, 0, 0, 0, 0x000003, 0},
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.has_remote = 1,
|
||
},{
|
||
/* http://linuxmedialabs.com */
|
||
.name = "LMLBT4",
|
||
.video_inputs = 4, /* IN1,IN2,IN3,IN4 */
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.muxsel = { 2, 3, 1, 0 },
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.needs_tvaudio = 0,
|
||
},{
|
||
/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
|
||
.name = "Tekram M205 PRO",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.svhs = 2,
|
||
.needs_tvaudio = 0,
|
||
.gpiomask = 0x68,
|
||
.muxsel = { 2, 3, 1},
|
||
.audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 },
|
||
.pll = PLL_28,
|
||
},{
|
||
|
||
/* ---- card 0x78 ---------------------------------- */
|
||
/* Javier Cendan Ares <jcendan@lycos.es> */
|
||
/* bt878 TV + FM without subsystem ID */
|
||
.name = "Conceptronic CONTVFMi",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x008007,
|
||
.muxsel = { 2, 3, 1, 1 },
|
||
.audiomux = { 0, 1, 2, 2, 3 },
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.has_remote = 1,
|
||
.has_radio = 1,
|
||
},{
|
||
/*Eric DEBIEF <debief@telemsa.com>*/
|
||
/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
|
||
/* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_PICOLO_TETRA_CHIP*/
|
||
/*0x79 in bttv.h*/
|
||
.name = "Euresys Picolo Tetra",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0,
|
||
.gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
|
||
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
|
||
.pll = PLL_28,
|
||
.needs_tvaudio = 0,
|
||
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
|
||
},{
|
||
/* Spirit TV Tuner from http://spiritmodems.com.au */
|
||
/* Stafford Goodsell <surge@goliath.homeunix.org> */
|
||
.name = "Spirit TV Tuner",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x0000000f,
|
||
.muxsel = { 2, 1, 1 },
|
||
.audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00},
|
||
.tuner_type = TUNER_TEMIC_PAL,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
},{
|
||
/* Wolfram Joost <wojo@frokaschwei.de> */
|
||
.name = "AVerMedia AVerTV DVB-T 771",
|
||
.video_inputs = 2,
|
||
.svhs = 1,
|
||
.tuner = -1,
|
||
.tuner_type = TUNER_ABSENT,
|
||
.muxsel = { 3 , 3 },
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.pll = PLL_28,
|
||
.has_dvb = 1,
|
||
.no_gpioirq = 1,
|
||
.has_remote = 1,
|
||
},{
|
||
/* ---- card 0x7c ---------------------------------- */
|
||
/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
|
||
/* Based on the Nebula card data - added remote and new card number - BTTV_AVDVBT_761, see also ir-kbd-gpio.c */
|
||
.name = "AverMedia AverTV DVB-T 761",
|
||
.video_inputs = 2,
|
||
.tuner = -1,
|
||
.svhs = 1,
|
||
.muxsel = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
.has_dvb = 1,
|
||
.no_gpioirq = 1,
|
||
.has_remote = 1,
|
||
},{
|
||
/* andre.schwarz@matrix-vision.de */
|
||
.name = "MATRIX Vision Sigma-SQ",
|
||
.video_inputs = 16,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0x0,
|
||
.muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
|
||
3, 3, 3, 3, 3, 3, 3, 3 },
|
||
.muxsel_hook = sigmaSQ_muxsel,
|
||
.audiomux = { 0 },
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* andre.schwarz@matrix-vision.de */
|
||
.name = "MATRIX Vision Sigma-SLC",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0x0,
|
||
.muxsel = { 2, 2, 2, 2 },
|
||
.muxsel_hook = sigmaSLC_muxsel,
|
||
.audiomux = { 0 },
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* BTTV_APAC_VIEWCOMP */
|
||
/* Attila Kondoros <attila.kondoros@chello.hu> */
|
||
/* bt878 TV + FM 0x00000000 subsystem ID */
|
||
.name = "APAC Viewcomp 878(AMAX)",
|
||
.video_inputs = 2,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = -1,
|
||
.gpiomask = 0xFF,
|
||
.muxsel = { 2, 3, 1, 1},
|
||
.audiomux = { 2, 0, 0, 0, 10},
|
||
.needs_tvaudio = 0,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_PAL,
|
||
.has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
|
||
.has_radio = 1, /* not every card has radio */
|
||
},{
|
||
|
||
/* ---- card 0x80 ---------------------------------- */
|
||
/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
|
||
.name = "DVICO FusionHDTV DVB-T Lite",
|
||
.tuner = -1,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.pll = PLL_28,
|
||
.no_video = 1,
|
||
.has_dvb = 1,
|
||
.tuner_type = -1,
|
||
},{
|
||
/* Steven <photon38@pchome.com.tw> */
|
||
.name = "V-Gear MyVCD",
|
||
.video_inputs = 3,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.gpiomask = 0x3f,
|
||
.muxsel = {2, 3, 1, 0},
|
||
.audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31},
|
||
.no_msp34xx = 1,
|
||
.pll = PLL_28,
|
||
.tuner_type = TUNER_PHILIPS_NTSC_M,
|
||
.has_radio = 0,
|
||
// .has_remote = 1,
|
||
},{
|
||
/* Rick C <cryptdragoon@gmail.com> */
|
||
.name = "Super TV Tuner",
|
||
.video_inputs = 4,
|
||
.audio_inputs = 1,
|
||
.tuner = 0,
|
||
.svhs = 2,
|
||
.muxsel = { 2, 3, 1, 0},
|
||
.tuner_type = TUNER_PHILIPS_NTSC,
|
||
.gpiomask = 0x008007,
|
||
.audiomux = { 0, 0x000001,0,0, 0},
|
||
.needs_tvaudio = 1,
|
||
.has_radio = 1,
|
||
},{
|
||
/* Chris Fanning <video4linux@haydon.net> */
|
||
.name = "Tibet Systems 'Progress DVR' CS16",
|
||
.video_inputs = 16,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.svhs = -1,
|
||
.muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
|
||
.pll = PLL_28,
|
||
.no_msp34xx = 1,
|
||
.no_tda9875 = 1,
|
||
.no_tda7432 = 1,
|
||
.tuner_type = -1,
|
||
.muxsel_hook = tibetCS16_muxsel,
|
||
},
|
||
{
|
||
/* Bill Brack <wbrack@mmm.com.hk> */
|
||
/*
|
||
* Note that, because of the card's wiring, the "master"
|
||
* BT878A chip (i.e. the one which controls the analog switch
|
||
* and must use this card type) is the 2nd one detected. The
|
||
* other 3 chips should use card type 0x85, whose description
|
||
* follows this one. There is a EEPROM on the card (which is
|
||
* connected to the I2C of one of those other chips), but is
|
||
* not currently handled. There is also a facility for a
|
||
* "monitor", which is also not currently implemented.
|
||
*/
|
||
.name = "Kodicom 4400R (master)",
|
||
.video_inputs = 16,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.tuner_type = -1,
|
||
.svhs = -1,
|
||
/* GPIO bits 0-9 used for analog switch:
|
||
* 00 - 03: camera selector
|
||
* 04 - 06: channel (controller) selector
|
||
* 07: data (1->on, 0->off)
|
||
* 08: strobe
|
||
* 09: reset
|
||
* bit 16 is input from sync separator for the channel
|
||
*/
|
||
.gpiomask = 0x0003ff,
|
||
.no_gpioirq = 1,
|
||
.muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
|
||
.pll = PLL_28,
|
||
.no_msp34xx = 1,
|
||
.no_tda7432 = 1,
|
||
.no_tda9875 = 1,
|
||
.muxsel_hook = kodicom4400r_muxsel,
|
||
},
|
||
{
|
||
/* Bill Brack <wbrack@mmm.com.hk> */
|
||
/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
|
||
* one which controls the analog switch, and must use the card type)
|
||
* is the 2nd one detected. The other 3 chips should use this card
|
||
* type
|
||
*/
|
||
.name = "Kodicom 4400R (slave)",
|
||
.video_inputs = 16,
|
||
.audio_inputs = 0,
|
||
.tuner = -1,
|
||
.tuner_type = -1,
|
||
.svhs = -1,
|
||
.gpiomask = 0x010000,
|
||
.no_gpioirq = 1,
|
||
.muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
|
||
.pll = PLL_28,
|
||
.no_msp34xx = 1,
|
||
.no_tda7432 = 1,
|
||
.no_tda9875 = 1,
|
||
.muxsel_hook = kodicom4400r_muxsel,
|
||
}};
|
||
|
||
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
|
||
static unsigned char eeprom_data[256];
|
||
|
||
/*
|
||
* identify card
|
||
*/
|
||
void __devinit bttv_idcard(struct bttv *btv)
|
||
{
|
||
unsigned int gpiobits;
|
||
int i,type;
|
||
unsigned short tmp;
|
||
|
||
/* read PCI subsystem ID */
|
||
pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
|
||
btv->cardid = tmp << 16;
|
||
pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
|
||
btv->cardid |= tmp;
|
||
|
||
if (0 != btv->cardid && 0xffffffff != btv->cardid) {
|
||
/* look for the card */
|
||
for (type = -1, i = 0; cards[i].id != 0; i++)
|
||
if (cards[i].id == btv->cardid)
|
||
type = i;
|
||
|
||
if (type != -1) {
|
||
/* found it */
|
||
printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
|
||
"PCI subsystem ID is %04x:%04x\n",
|
||
btv->c.nr,cards[type].name,cards[type].cardnr,
|
||
btv->cardid & 0xffff,
|
||
(btv->cardid >> 16) & 0xffff);
|
||
btv->c.type = cards[type].cardnr;
|
||
} else {
|
||
/* 404 */
|
||
printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
|
||
btv->c.nr, btv->cardid & 0xffff,
|
||
(btv->cardid >> 16) & 0xffff);
|
||
printk(KERN_DEBUG "please mail id, board name and "
|
||
"the correct card= insmod option to kraxel@bytesex.org\n");
|
||
}
|
||
}
|
||
|
||
/* let the user override the autodetected type */
|
||
if (card[btv->c.nr] < bttv_num_tvcards)
|
||
btv->c.type=card[btv->c.nr];
|
||
|
||
/* print which card config we are using */
|
||
printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
|
||
bttv_tvcards[btv->c.type].name, btv->c.type,
|
||
card[btv->c.nr] < bttv_num_tvcards
|
||
? "insmod option" : "autodetected");
|
||
|
||
/* overwrite gpio stuff ?? */
|
||
if (UNSET == audioall && UNSET == audiomux[0])
|
||
return;
|
||
|
||
if (UNSET != audiomux[0]) {
|
||
gpiobits = 0;
|
||
for (i = 0; i < 5; i++) {
|
||
bttv_tvcards[btv->c.type].audiomux[i] = audiomux[i];
|
||
gpiobits |= audiomux[i];
|
||
}
|
||
} else {
|
||
gpiobits = audioall;
|
||
for (i = 0; i < 5; i++) {
|
||
bttv_tvcards[btv->c.type].audiomux[i] = audioall;
|
||
}
|
||
}
|
||
bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
|
||
printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
|
||
btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
|
||
for (i = 0; i < 5; i++) {
|
||
printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].audiomux[i]);
|
||
}
|
||
printk("\n");
|
||
}
|
||
|
||
/*
|
||
* (most) board specific initialisations goes here
|
||
*/
|
||
|
||
/* Some Modular Technology cards have an eeprom, but no subsystem ID */
|
||
void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
|
||
{
|
||
int type = -1;
|
||
|
||
if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
|
||
type = BTTV_MODTEC_205;
|
||
else if (0 == strncmp(eeprom_data+20,"Picolo",7))
|
||
type = BTTV_EURESYS_PICOLO;
|
||
else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
|
||
type = BTTV_HAUPPAUGE; /* old bt848 */
|
||
|
||
if (-1 != type) {
|
||
btv->c.type = type;
|
||
printk("bttv%d: detected by eeprom: %s [card=%d]\n",
|
||
btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
|
||
}
|
||
}
|
||
|
||
static void flyvideo_gpio(struct bttv *btv)
|
||
{
|
||
int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
|
||
int tuner=-1,ttype;
|
||
|
||
gpio_inout(0xffffff, 0);
|
||
udelay(8); // without this we would see the 0x1800 mask
|
||
gpio = gpio_read();
|
||
/* FIXME: must restore OUR_EN ??? */
|
||
|
||
// all cards provide GPIO info, some have an additional eeprom
|
||
// LR50: GPIO coding can be found lower right CP1 .. CP9
|
||
// CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
|
||
// GPIO14-12: n.c.
|
||
// LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
|
||
|
||
// lowest 3 bytes are remote control codes (no handshake needed)
|
||
// xxxFFF: No remote control chip soldered
|
||
// xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
|
||
// Note: Some bits are Audio_Mask !
|
||
|
||
ttype=(gpio&0x0f0000)>>16;
|
||
switch(ttype) {
|
||
case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
|
||
break;
|
||
case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
|
||
break;
|
||
case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
|
||
break;
|
||
case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
|
||
break;
|
||
case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
|
||
break;
|
||
default:
|
||
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
|
||
}
|
||
|
||
has_remote = gpio & 0x800000;
|
||
has_radio = gpio & 0x400000;
|
||
// unknown 0x200000;
|
||
// unknown2 0x100000;
|
||
is_capture_only = !(gpio & 0x008000); //GPIO15
|
||
has_tda9820_tda9821 = !(gpio & 0x004000);
|
||
is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
|
||
// gpio & 0x001000 // output bit for audio routing
|
||
|
||
if(is_capture_only)
|
||
tuner=4; // No tuner present
|
||
|
||
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
|
||
btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
|
||
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
|
||
btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
|
||
is_capture_only?"yes":"no ");
|
||
|
||
if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
|
||
btv->tuner_type = tuner;
|
||
btv->has_radio = has_radio;
|
||
|
||
// LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
|
||
// LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
|
||
// Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
|
||
if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
|
||
//todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
|
||
}
|
||
|
||
static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
|
||
14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
|
||
static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
|
||
1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
|
||
|
||
static void miro_pinnacle_gpio(struct bttv *btv)
|
||
{
|
||
int id,msp,gpio;
|
||
char *info;
|
||
|
||
gpio_inout(0xffffff, 0);
|
||
gpio = gpio_read();
|
||
id = ((gpio>>10) & 63) -1;
|
||
msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx");
|
||
if (id < 32) {
|
||
btv->tuner_type = miro_tunermap[id];
|
||
if (0 == (gpio & 0x20)) {
|
||
btv->has_radio = 1;
|
||
if (!miro_fmtuner[id]) {
|
||
btv->has_matchbox = 1;
|
||
btv->mbox_we = (1<<6);
|
||
btv->mbox_most = (1<<7);
|
||
btv->mbox_clk = (1<<8);
|
||
btv->mbox_data = (1<<9);
|
||
btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
|
||
}
|
||
} else {
|
||
btv->has_radio = 0;
|
||
}
|
||
if (-1 != msp) {
|
||
if (btv->c.type == BTTV_MIRO)
|
||
btv->c.type = BTTV_MIROPRO;
|
||
if (btv->c.type == BTTV_PINNACLE)
|
||
btv->c.type = BTTV_PINNACLEPRO;
|
||
}
|
||
printk(KERN_INFO
|
||
"bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
|
||
btv->c.nr, id+1, btv->tuner_type,
|
||
!btv->has_radio ? "no" :
|
||
(btv->has_matchbox ? "matchbox" : "fmtuner"),
|
||
(-1 == msp) ? "no" : "yes");
|
||
} else {
|
||
/* new cards with microtune tuner */
|
||
id = 63 - id;
|
||
btv->has_radio = 0;
|
||
switch (id) {
|
||
case 1:
|
||
info = "PAL / mono";
|
||
break;
|
||
case 2:
|
||
info = "PAL+SECAM / stereo";
|
||
btv->has_radio = 1;
|
||
break;
|
||
case 3:
|
||
info = "NTSC / stereo";
|
||
btv->has_radio = 1;
|
||
break;
|
||
case 4:
|
||
info = "PAL+SECAM / mono";
|
||
break;
|
||
case 5:
|
||
info = "NTSC / mono";
|
||
break;
|
||
case 6:
|
||
info = "NTSC / stereo";
|
||
break;
|
||
case 7:
|
||
info = "PAL / stereo";
|
||
break;
|
||
default:
|
||
info = "oops: unknown card";
|
||
break;
|
||
}
|
||
if (-1 != msp)
|
||
btv->c.type = BTTV_PINNACLEPRO;
|
||
printk(KERN_INFO
|
||
"bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
|
||
btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
|
||
btv->tuner_type = 33;
|
||
btv->pinnacle_id = id;
|
||
}
|
||
}
|
||
|
||
/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
|
||
#define LM1882_SYNC_DRIVE 0x200000L
|
||
|
||
static void init_ids_eagle(struct bttv *btv)
|
||
{
|
||
gpio_inout(0xffffff,0xFFFF37);
|
||
gpio_write(0x200020);
|
||
|
||
/* flash strobe inverter ?! */
|
||
gpio_write(0x200024);
|
||
|
||
/* switch sync drive off */
|
||
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
|
||
|
||
/* set BT848 muxel to 2 */
|
||
btaor((2)<<5, ~(2<<5), BT848_IFORM);
|
||
}
|
||
|
||
/* Muxsel helper for the IDS Eagle.
|
||
* the eagles does not use the standard muxsel-bits but
|
||
* has its own multiplexer */
|
||
static void eagle_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
btaor((2)<<5, ~(3<<5), BT848_IFORM);
|
||
gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
|
||
|
||
#if 0
|
||
/* svhs */
|
||
/* wake chroma ADC */
|
||
btand(~BT848_ADC_C_SLEEP, BT848_ADC);
|
||
/* set to YC video */
|
||
btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
|
||
btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
|
||
#else
|
||
/* composite */
|
||
/* set chroma ADC to sleep */
|
||
btor(BT848_ADC_C_SLEEP, BT848_ADC);
|
||
/* set to composite video */
|
||
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
|
||
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
|
||
#endif
|
||
|
||
/* switch sync drive off */
|
||
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
|
||
}
|
||
|
||
static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
static const int masks[] = {0x30, 0x01, 0x12, 0x23};
|
||
gpio_write(masks[input%4]);
|
||
}
|
||
|
||
/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
|
||
alarms output
|
||
|
||
GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
||
assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
|
||
|
||
IN - sensor inputs, INx - sensor inputs and TI XORed together
|
||
O1,O2,O3 - alarm outputs (relays)
|
||
|
||
OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
|
||
|
||
*/
|
||
|
||
static void init_lmlbt4x(struct bttv *btv)
|
||
{
|
||
printk(KERN_DEBUG "LMLBT4x init\n");
|
||
btwrite(0x000000, BT848_GPIO_REG_INP);
|
||
gpio_inout(0xffffff, 0x0006C0);
|
||
gpio_write(0x000000);
|
||
}
|
||
|
||
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
unsigned int inmux = input % 8;
|
||
gpio_inout( 0xf, 0xf );
|
||
gpio_bits( 0xf, inmux );
|
||
}
|
||
|
||
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
unsigned int inmux = input % 4;
|
||
gpio_inout( 3<<9, 3<<9 );
|
||
gpio_bits( 3<<9, inmux<<9 );
|
||
}
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
|
||
static void bttv_reset_audio(struct bttv *btv)
|
||
{
|
||
/*
|
||
* BT878A has a audio-reset register.
|
||
* 1. This register is an audio reset function but it is in
|
||
* function-0 (video capture) address space.
|
||
* 2. It is enough to do this once per power-up of the card.
|
||
* 3. There is a typo in the Conexant doc -- it is not at
|
||
* 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
|
||
* --//Shrikumar 030609
|
||
*/
|
||
if (btv->id != 878)
|
||
return;
|
||
|
||
if (bttv_debug)
|
||
printk("bttv%d: BT878A ARESET\n",btv->c.nr);
|
||
btwrite((1<<7), 0x058);
|
||
udelay(10);
|
||
btwrite( 0, 0x058);
|
||
}
|
||
|
||
/* initialization part one -- before registering i2c bus */
|
||
void __devinit bttv_init_card1(struct bttv *btv)
|
||
{
|
||
switch (btv->c.type) {
|
||
case BTTV_HAUPPAUGE:
|
||
case BTTV_HAUPPAUGE878:
|
||
boot_msp34xx(btv,5);
|
||
break;
|
||
case BTTV_VOODOOTV_FM:
|
||
boot_msp34xx(btv,20);
|
||
break;
|
||
case BTTV_AVERMEDIA98:
|
||
boot_msp34xx(btv,11);
|
||
break;
|
||
case BTTV_HAUPPAUGEPVR:
|
||
pvr_boot(btv);
|
||
break;
|
||
case BTTV_TWINHAN_DST:
|
||
case BTTV_AVDVBT_771:
|
||
btv->use_i2c_hw = 1;
|
||
break;
|
||
}
|
||
if (!bttv_tvcards[btv->c.type].has_dvb)
|
||
bttv_reset_audio(btv);
|
||
}
|
||
|
||
/* initialization part two -- after registering i2c bus */
|
||
void __devinit bttv_init_card2(struct bttv *btv)
|
||
{
|
||
int tda9887;
|
||
btv->tuner_type = -1;
|
||
|
||
if (BTTV_UNKNOWN == btv->c.type) {
|
||
bttv_readee(btv,eeprom_data,0xa0);
|
||
identify_by_eeprom(btv,eeprom_data);
|
||
}
|
||
|
||
switch (btv->c.type) {
|
||
case BTTV_MIRO:
|
||
case BTTV_MIROPRO:
|
||
case BTTV_PINNACLE:
|
||
case BTTV_PINNACLEPRO:
|
||
/* miro/pinnacle */
|
||
miro_pinnacle_gpio(btv);
|
||
break;
|
||
case BTTV_FLYVIDEO_98:
|
||
case BTTV_MAXI:
|
||
case BTTV_LIFE_FLYKIT:
|
||
case BTTV_FLYVIDEO:
|
||
case BTTV_TYPHOON_TVIEW:
|
||
case BTTV_CHRONOS_VS2:
|
||
case BTTV_FLYVIDEO_98FM:
|
||
case BTTV_FLYVIDEO2000:
|
||
case BTTV_FLYVIDEO98EZ:
|
||
case BTTV_CONFERENCETV:
|
||
case BTTV_LIFETEC_9415:
|
||
flyvideo_gpio(btv);
|
||
break;
|
||
case BTTV_HAUPPAUGE:
|
||
case BTTV_HAUPPAUGE878:
|
||
case BTTV_HAUPPAUGEPVR:
|
||
/* pick up some config infos from the eeprom */
|
||
bttv_readee(btv,eeprom_data,0xa0);
|
||
hauppauge_eeprom(btv);
|
||
break;
|
||
case BTTV_AVERMEDIA98:
|
||
case BTTV_AVPHONE98:
|
||
bttv_readee(btv,eeprom_data,0xa0);
|
||
avermedia_eeprom(btv);
|
||
break;
|
||
case BTTV_PXC200:
|
||
init_PXC200(btv);
|
||
break;
|
||
case BTTV_PICOLO_TETRA_CHIP:
|
||
picolo_tetra_init(btv);
|
||
break;
|
||
case BTTV_VHX:
|
||
btv->has_radio = 1;
|
||
btv->has_matchbox = 1;
|
||
btv->mbox_we = 0x20;
|
||
btv->mbox_most = 0;
|
||
btv->mbox_clk = 0x08;
|
||
btv->mbox_data = 0x10;
|
||
btv->mbox_mask = 0x38;
|
||
break;
|
||
case BTTV_VOBIS_BOOSTAR:
|
||
case BTTV_TERRATV:
|
||
terratec_active_radio_upgrade(btv);
|
||
break;
|
||
case BTTV_MAGICTVIEW061:
|
||
if (btv->cardid == 0x3002144f) {
|
||
btv->has_radio=1;
|
||
printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
|
||
}
|
||
break;
|
||
case BTTV_STB2:
|
||
if (btv->cardid == 0x3060121a) {
|
||
/* Fix up entry for 3DFX VoodooTV 100,
|
||
which is an OEM STB card variant. */
|
||
btv->has_radio=0;
|
||
btv->tuner_type=TUNER_TEMIC_NTSC;
|
||
}
|
||
break;
|
||
case BTTV_OSPREY1x0:
|
||
case BTTV_OSPREY1x0_848:
|
||
case BTTV_OSPREY101_848:
|
||
case BTTV_OSPREY1x1:
|
||
case BTTV_OSPREY1x1_SVID:
|
||
case BTTV_OSPREY2xx:
|
||
case BTTV_OSPREY2x0_SVID:
|
||
case BTTV_OSPREY2x0:
|
||
case BTTV_OSPREY500:
|
||
case BTTV_OSPREY540:
|
||
case BTTV_OSPREY2000:
|
||
bttv_readee(btv,eeprom_data,0xa0);
|
||
osprey_eeprom(btv);
|
||
break;
|
||
case BTTV_IDS_EAGLE:
|
||
init_ids_eagle(btv);
|
||
break;
|
||
case BTTV_MODTEC_205:
|
||
bttv_readee(btv,eeprom_data,0xa0);
|
||
modtec_eeprom(btv);
|
||
break;
|
||
case BTTV_LMLBT4:
|
||
init_lmlbt4x(btv);
|
||
break;
|
||
case BTTV_TIBET_CS16:
|
||
tibetCS16_init(btv);
|
||
break;
|
||
case BTTV_KODICOM_4400R:
|
||
kodicom4400r_init(btv);
|
||
break;
|
||
}
|
||
|
||
/* pll configuration */
|
||
if (!(btv->id==848 && btv->revision==0x11)) {
|
||
/* defaults from card list */
|
||
if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
|
||
btv->pll.pll_ifreq=28636363;
|
||
btv->pll.pll_crystal=BT848_IFORM_XT0;
|
||
}
|
||
if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
|
||
btv->pll.pll_ifreq=35468950;
|
||
btv->pll.pll_crystal=BT848_IFORM_XT1;
|
||
}
|
||
/* insmod options can override */
|
||
switch (pll[btv->c.nr]) {
|
||
case 0: /* none */
|
||
btv->pll.pll_crystal = 0;
|
||
btv->pll.pll_ifreq = 0;
|
||
btv->pll.pll_ofreq = 0;
|
||
break;
|
||
case 1: /* 28 MHz */
|
||
case 28:
|
||
btv->pll.pll_ifreq = 28636363;
|
||
btv->pll.pll_ofreq = 0;
|
||
btv->pll.pll_crystal = BT848_IFORM_XT0;
|
||
break;
|
||
case 2: /* 35 MHz */
|
||
case 35:
|
||
btv->pll.pll_ifreq = 35468950;
|
||
btv->pll.pll_ofreq = 0;
|
||
btv->pll.pll_crystal = BT848_IFORM_XT1;
|
||
break;
|
||
}
|
||
}
|
||
btv->pll.pll_current = -1;
|
||
|
||
/* tuner configuration (from card list / autodetect / insmod option) */
|
||
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
|
||
if(UNSET == btv->tuner_type)
|
||
btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
|
||
if (UNSET != tuner[btv->c.nr])
|
||
btv->tuner_type = tuner[btv->c.nr];
|
||
printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
|
||
if (btv->pinnacle_id != UNSET)
|
||
bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
|
||
&btv->pinnacle_id);
|
||
if (btv->tuner_type != UNSET)
|
||
bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
|
||
btv->svhs = bttv_tvcards[btv->c.type].svhs;
|
||
if (svhs[btv->c.nr] != UNSET)
|
||
btv->svhs = svhs[btv->c.nr];
|
||
if (remote[btv->c.nr] != UNSET)
|
||
btv->has_remote = remote[btv->c.nr];
|
||
|
||
if (bttv_tvcards[btv->c.type].has_radio)
|
||
btv->has_radio=1;
|
||
if (bttv_tvcards[btv->c.type].has_remote)
|
||
btv->has_remote=1;
|
||
if (bttv_tvcards[btv->c.type].no_gpioirq)
|
||
btv->gpioirq=0;
|
||
if (bttv_tvcards[btv->c.type].audio_hook)
|
||
btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
|
||
|
||
if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
|
||
/* detect Bt832 chip for quartzsight digital camera */
|
||
if ((bttv_I2CRead(btv, I2C_BT832_ALT1, "Bt832") >=0) ||
|
||
(bttv_I2CRead(btv, I2C_BT832_ALT2, "Bt832") >=0))
|
||
boot_bt832(btv);
|
||
}
|
||
|
||
if (!autoload)
|
||
return;
|
||
|
||
/* try to detect audio/fader chips */
|
||
if (!bttv_tvcards[btv->c.type].no_msp34xx &&
|
||
bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx") >=0)
|
||
request_module("msp3400");
|
||
|
||
if (bttv_tvcards[btv->c.type].msp34xx_alt &&
|
||
bttv_I2CRead(btv, I2C_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
|
||
request_module("msp3400");
|
||
|
||
if (!bttv_tvcards[btv->c.type].no_tda9875 &&
|
||
bttv_I2CRead(btv, I2C_TDA9875, "TDA9875") >=0)
|
||
request_module("tda9875");
|
||
|
||
if (!bttv_tvcards[btv->c.type].no_tda7432 &&
|
||
bttv_I2CRead(btv, I2C_TDA7432, "TDA7432") >=0)
|
||
request_module("tda7432");
|
||
|
||
if (bttv_tvcards[btv->c.type].needs_tvaudio)
|
||
request_module("tvaudio");
|
||
|
||
/* tuner modules */
|
||
tda9887 = 0;
|
||
if (btv->pinnacle_id != UNSET)
|
||
tda9887 = 1;
|
||
if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
|
||
bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0)
|
||
tda9887 = 1;
|
||
if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
|
||
(btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
|
||
(btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
|
||
tda9887)
|
||
request_module("tda9887");
|
||
if (btv->tuner_type != UNSET)
|
||
request_module("tuner");
|
||
}
|
||
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
|
||
static void modtec_eeprom(struct bttv *btv)
|
||
{
|
||
if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
|
||
btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
|
||
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
|
||
btv->c.nr,&eeprom_data[0x1e]);
|
||
} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
|
||
btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
|
||
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
|
||
btv->c.nr,&eeprom_data[0x1e]);
|
||
} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
|
||
btv->tuner_type=TUNER_PHILIPS_NTSC;
|
||
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
|
||
btv->c.nr,&eeprom_data[0x1e]);
|
||
} else {
|
||
printk("bttv%d: Modtec: Unknown TunerString: %s\n",
|
||
btv->c.nr,&eeprom_data[0x1e]);
|
||
}
|
||
}
|
||
|
||
static void __devinit hauppauge_eeprom(struct bttv *btv)
|
||
{
|
||
struct tveeprom tv;
|
||
|
||
tveeprom_hauppauge_analog(&tv, eeprom_data);
|
||
btv->tuner_type = tv.tuner_type;
|
||
btv->has_radio = tv.has_radio;
|
||
}
|
||
|
||
static int terratec_active_radio_upgrade(struct bttv *btv)
|
||
{
|
||
int freq;
|
||
|
||
btv->has_radio = 1;
|
||
btv->has_matchbox = 1;
|
||
btv->mbox_we = 0x10;
|
||
btv->mbox_most = 0x20;
|
||
btv->mbox_clk = 0x08;
|
||
btv->mbox_data = 0x04;
|
||
btv->mbox_mask = 0x3c;
|
||
|
||
btv->mbox_iow = 1 << 8;
|
||
btv->mbox_ior = 1 << 9;
|
||
btv->mbox_csel = 1 << 10;
|
||
|
||
freq=88000/62.5;
|
||
tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
|
||
if (0x1ed8 == tea5757_read(btv)) {
|
||
printk("bttv%d: Terratec Active Radio Upgrade found.\n",
|
||
btv->c.nr);
|
||
btv->has_radio = 1;
|
||
btv->has_matchbox = 1;
|
||
} else {
|
||
btv->has_radio = 0;
|
||
btv->has_matchbox = 0;
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
|
||
/*
|
||
* minimal bootstrap for the WinTV/PVR -- upload altera firmware.
|
||
*
|
||
* The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
|
||
* a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
|
||
* unpacked with unzip).
|
||
*/
|
||
#define PVR_GPIO_DELAY 10
|
||
|
||
#define BTTV_ALT_DATA 0x000001
|
||
#define BTTV_ALT_DCLK 0x100000
|
||
#define BTTV_ALT_NCONFIG 0x800000
|
||
|
||
static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
|
||
{
|
||
u32 n;
|
||
u8 bits;
|
||
int i;
|
||
|
||
gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
|
||
gpio_write(0);
|
||
udelay(PVR_GPIO_DELAY);
|
||
|
||
gpio_write(BTTV_ALT_NCONFIG);
|
||
udelay(PVR_GPIO_DELAY);
|
||
|
||
for (n = 0; n < microlen; n++) {
|
||
bits = micro[n];
|
||
for ( i = 0 ; i < 8 ; i++ ) {
|
||
gpio_bits(BTTV_ALT_DCLK,0);
|
||
if (bits & 0x01)
|
||
gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
|
||
else
|
||
gpio_bits(BTTV_ALT_DATA,0);
|
||
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
|
||
bits >>= 1;
|
||
}
|
||
}
|
||
gpio_bits(BTTV_ALT_DCLK,0);
|
||
udelay(PVR_GPIO_DELAY);
|
||
|
||
/* begin Altera init loop (Not necessary,but doesn't hurt) */
|
||
for (i = 0 ; i < 30 ; i++) {
|
||
gpio_bits(BTTV_ALT_DCLK,0);
|
||
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
|
||
}
|
||
gpio_bits(BTTV_ALT_DCLK,0);
|
||
return 0;
|
||
}
|
||
|
||
static int __devinit pvr_boot(struct bttv *btv)
|
||
{
|
||
const struct firmware *fw_entry;
|
||
int rc;
|
||
|
||
rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
|
||
if (rc != 0) {
|
||
printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
|
||
btv->c.nr);
|
||
return rc;
|
||
}
|
||
rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
|
||
printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
|
||
btv->c.nr, (rc < 0) ? "failed" : "ok");
|
||
release_firmware(fw_entry);
|
||
return rc;
|
||
}
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* some osprey specific stuff */
|
||
|
||
static void __devinit osprey_eeprom(struct bttv *btv)
|
||
{
|
||
int i = 0;
|
||
unsigned char *ee = eeprom_data;
|
||
unsigned long serial = 0;
|
||
|
||
if (btv->c.type == 0) {
|
||
/* this might be an antique... check for MMAC label in eeprom */
|
||
if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
|
||
unsigned char checksum = 0;
|
||
for (i =0; i<21; i++)
|
||
checksum += ee[i];
|
||
if (checksum != ee[21])
|
||
return;
|
||
btv->c.type = BTTV_OSPREY1x0_848;
|
||
for (i = 12; i < 21; i++)
|
||
serial *= 10, serial += ee[i] - '0';
|
||
}
|
||
} else {
|
||
unsigned short type;
|
||
int offset = 4*16;
|
||
|
||
for(; offset < 8*16; offset += 16) {
|
||
unsigned short checksum = 0;
|
||
/* verify the checksum */
|
||
for(i = 0; i<14; i++) checksum += ee[i+offset];
|
||
checksum = ~checksum; /* no idea why */
|
||
if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
|
||
((checksum & 0x0FF) == ee[offset+15])) {
|
||
break;
|
||
}
|
||
}
|
||
|
||
if (offset >= 8*16)
|
||
return;
|
||
|
||
/* found a valid descriptor */
|
||
type = (ee[offset+4]<<8) | (ee[offset+5]);
|
||
|
||
switch(type) {
|
||
|
||
/* 848 based */
|
||
case 0x0004:
|
||
btv->c.type = BTTV_OSPREY1x0_848;
|
||
break;
|
||
case 0x0005:
|
||
btv->c.type = BTTV_OSPREY101_848;
|
||
break;
|
||
|
||
/* 878 based */
|
||
case 0x0012:
|
||
case 0x0013:
|
||
btv->c.type = BTTV_OSPREY1x0;
|
||
break;
|
||
case 0x0014:
|
||
case 0x0015:
|
||
btv->c.type = BTTV_OSPREY1x1;
|
||
break;
|
||
case 0x0016:
|
||
case 0x0017:
|
||
case 0x0020:
|
||
btv->c.type = BTTV_OSPREY1x1_SVID;
|
||
break;
|
||
case 0x0018:
|
||
case 0x0019:
|
||
case 0x001E:
|
||
case 0x001F:
|
||
btv->c.type = BTTV_OSPREY2xx;
|
||
break;
|
||
case 0x001A:
|
||
case 0x001B:
|
||
btv->c.type = BTTV_OSPREY2x0_SVID;
|
||
break;
|
||
case 0x0040:
|
||
btv->c.type = BTTV_OSPREY500;
|
||
break;
|
||
case 0x0050:
|
||
case 0x0056:
|
||
btv->c.type = BTTV_OSPREY540;
|
||
/* bttv_osprey_540_init(btv); */
|
||
break;
|
||
case 0x0060:
|
||
case 0x0070:
|
||
btv->c.type = BTTV_OSPREY2x0;
|
||
//enable output on select control lines
|
||
gpio_inout(0xffffff,0x000303);
|
||
break;
|
||
default:
|
||
/* unknown...leave generic, but get serial # */
|
||
break;
|
||
}
|
||
serial = (ee[offset+6] << 24)
|
||
| (ee[offset+7] << 16)
|
||
| (ee[offset+8] << 8)
|
||
| (ee[offset+9]);
|
||
}
|
||
|
||
printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
|
||
btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
|
||
}
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* AVermedia specific stuff, from bktr_card.c */
|
||
|
||
static int tuner_0_table[] = {
|
||
TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
|
||
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
|
||
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
|
||
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
|
||
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
|
||
TUNER_PHILIPS_FM1216ME_MK3 };
|
||
#if 0
|
||
int tuner_0_fm_table[] = {
|
||
PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
|
||
PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
|
||
PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
|
||
PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
|
||
PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
|
||
#endif
|
||
|
||
static int tuner_1_table[] = {
|
||
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
|
||
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
|
||
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
|
||
TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
|
||
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
|
||
|
||
static void __devinit avermedia_eeprom(struct bttv *btv)
|
||
{
|
||
int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
|
||
|
||
tuner_make = (eeprom_data[0x41] & 0x7);
|
||
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
|
||
tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
|
||
btv->has_remote = (eeprom_data[0x42] & 0x01);
|
||
|
||
if (tuner_make == 0 || tuner_make == 2)
|
||
if(tuner_format <=0x0a)
|
||
tuner = tuner_0_table[tuner_format];
|
||
if (tuner_make == 1)
|
||
if(tuner_format <=9)
|
||
tuner = tuner_1_table[tuner_format];
|
||
|
||
if (tuner_make == 4)
|
||
if(tuner_format == 0x09)
|
||
tuner = TUNER_LG_NTSC_NEW_TAPC; // TAPC-G702P
|
||
|
||
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
|
||
btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
|
||
if(tuner) {
|
||
btv->tuner_type=tuner;
|
||
printk("%d",tuner);
|
||
} else
|
||
printk("Unknown type");
|
||
printk(" radio:%s remote control:%s\n",
|
||
tuner_tv_fm ? "yes" : "no",
|
||
btv->has_remote ? "yes" : "no");
|
||
}
|
||
|
||
/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
|
||
void bttv_tda9880_setnorm(struct bttv *btv, int norm)
|
||
{
|
||
// fix up our card entry
|
||
if(norm==VIDEO_MODE_NTSC) {
|
||
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
|
||
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
|
||
dprintk("bttv_tda9880_setnorm to NTSC\n");
|
||
}
|
||
else {
|
||
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff;
|
||
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
|
||
dprintk("bttv_tda9880_setnorm to PAL\n");
|
||
}
|
||
// set GPIO according
|
||
gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
|
||
bttv_tvcards[btv->c.type].audiomux[btv->audio]);
|
||
}
|
||
|
||
|
||
/*
|
||
* reset/enable the MSP on some Hauppauge cards
|
||
* Thanks to Ky<4B>sti M<>lkki (kmalkki@cc.hut.fi)!
|
||
*
|
||
* Hauppauge: pin 5
|
||
* Voodoo: pin 20
|
||
*/
|
||
static void __devinit boot_msp34xx(struct bttv *btv, int pin)
|
||
{
|
||
int mask = (1 << pin);
|
||
|
||
gpio_inout(mask,mask);
|
||
gpio_bits(mask,0);
|
||
udelay(2500);
|
||
gpio_bits(mask,mask);
|
||
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"msp34xx");
|
||
if (bttv_verbose)
|
||
printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
|
||
"init [%d]\n", btv->c.nr, pin);
|
||
}
|
||
|
||
static void __devinit boot_bt832(struct bttv *btv)
|
||
{
|
||
#if 0 /* not working yet */
|
||
int resetbit=0;
|
||
|
||
switch (btv->c.type) {
|
||
case BTTV_PXELVWPLTVPAK:
|
||
resetbit = 0x400000;
|
||
break;
|
||
case BTTV_MODTEC_205:
|
||
resetbit = 1<<9;
|
||
break;
|
||
default:
|
||
BUG();
|
||
}
|
||
|
||
request_module("bt832");
|
||
bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
|
||
|
||
printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->c.nr,resetbit);
|
||
gpio_write(0);
|
||
gpio_inout(resetbit, resetbit);
|
||
udelay(5);
|
||
gpio_bits(resetbit, resetbit);
|
||
udelay(5);
|
||
gpio_bits(resetbit, 0);
|
||
udelay(5);
|
||
|
||
// bt832 on pixelview changes from i2c 0x8a to 0x88 after
|
||
// being reset as above. So we must follow by this:
|
||
bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
|
||
#endif
|
||
}
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* Imagenation L-Model PXC200 Framegrabber */
|
||
/* This is basically the same procedure as
|
||
* used by Alessandro Rubini in his pxc200
|
||
* driver, but using BTTV functions */
|
||
|
||
static void __devinit init_PXC200(struct bttv *btv)
|
||
{
|
||
static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
|
||
0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
|
||
0x00 };
|
||
unsigned int i;
|
||
int tmp;
|
||
u32 val;
|
||
|
||
/* Initialise GPIO-connevted stuff */
|
||
gpio_inout(0xffffff, (1<<13));
|
||
gpio_write(0);
|
||
udelay(3);
|
||
gpio_write(1<<13);
|
||
/* GPIO inputs are pulled up, so no need to drive
|
||
* reset pin any longer */
|
||
gpio_bits(0xffffff, 0);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"pxc200");
|
||
|
||
/* we could/should try and reset/control the AD pots? but
|
||
right now we simply turned off the crushing. Without
|
||
this the AGC drifts drifts
|
||
remember the EN is reverse logic -->
|
||
setting BT848_ADC_AGC_EN disable the AGC
|
||
tboult@eecs.lehigh.edu
|
||
*/
|
||
|
||
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
|
||
|
||
/* Initialise MAX517 DAC */
|
||
printk(KERN_INFO "Setting DAC reference voltage level ...\n");
|
||
bttv_I2CWrite(btv,0x5E,0,0x80,1);
|
||
|
||
/* Initialise 12C508 PIC */
|
||
/* The I2CWrite and I2CRead commmands are actually to the
|
||
* same chips - but the R/W bit is included in the address
|
||
* argument so the numbers are different */
|
||
|
||
|
||
printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
|
||
|
||
/* First of all, enable the clock line. This is used in the PXC200-F */
|
||
val = btread(BT848_GPIO_DMA_CTL);
|
||
val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
|
||
btwrite(val, BT848_GPIO_DMA_CTL);
|
||
|
||
/* Then, push to 0 the reset pin long enough to reset the *
|
||
* device same as above for the reset line, but not the same
|
||
* value sent to the GPIO-connected stuff
|
||
* which one is the good one? */
|
||
gpio_inout(0xffffff,(1<<2));
|
||
gpio_write(0);
|
||
udelay(10);
|
||
gpio_write(1<<2);
|
||
|
||
for (i = 0; i < ARRAY_SIZE(vals); i++) {
|
||
tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
|
||
if (tmp != -1) {
|
||
printk(KERN_INFO
|
||
"I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
|
||
vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
|
||
}
|
||
}
|
||
|
||
printk(KERN_INFO "PXC200 Initialised.\n");
|
||
}
|
||
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
|
||
/*
|
||
* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
|
||
* This code is placed under the terms of the GNU General Public License
|
||
*
|
||
* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
|
||
*/
|
||
|
||
static void bus_low(struct bttv *btv, int bit)
|
||
{
|
||
if (btv->mbox_ior) {
|
||
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
||
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
||
udelay(5);
|
||
}
|
||
|
||
gpio_bits(bit,0);
|
||
udelay(5);
|
||
|
||
if (btv->mbox_ior) {
|
||
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
|
||
udelay(5);
|
||
}
|
||
}
|
||
|
||
static void bus_high(struct bttv *btv, int bit)
|
||
{
|
||
if (btv->mbox_ior) {
|
||
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
||
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
||
udelay(5);
|
||
}
|
||
|
||
gpio_bits(bit,bit);
|
||
udelay(5);
|
||
|
||
if (btv->mbox_ior) {
|
||
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
|
||
udelay(5);
|
||
}
|
||
}
|
||
|
||
static int bus_in(struct bttv *btv, int bit)
|
||
{
|
||
if (btv->mbox_ior) {
|
||
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
||
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
||
udelay(5);
|
||
|
||
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
|
||
udelay(5);
|
||
}
|
||
return gpio_read() & (bit);
|
||
}
|
||
|
||
/* TEA5757 register bits */
|
||
#define TEA_FREQ 0:14
|
||
#define TEA_BUFFER 15:15
|
||
|
||
#define TEA_SIGNAL_STRENGTH 16:17
|
||
|
||
#define TEA_PORT1 18:18
|
||
#define TEA_PORT0 19:19
|
||
|
||
#define TEA_BAND 20:21
|
||
#define TEA_BAND_FM 0
|
||
#define TEA_BAND_MW 1
|
||
#define TEA_BAND_LW 2
|
||
#define TEA_BAND_SW 3
|
||
|
||
#define TEA_MONO 22:22
|
||
#define TEA_ALLOW_STEREO 0
|
||
#define TEA_FORCE_MONO 1
|
||
|
||
#define TEA_SEARCH_DIRECTION 23:23
|
||
#define TEA_SEARCH_DOWN 0
|
||
#define TEA_SEARCH_UP 1
|
||
|
||
#define TEA_STATUS 24:24
|
||
#define TEA_STATUS_TUNED 0
|
||
#define TEA_STATUS_SEARCHING 1
|
||
|
||
/* Low-level stuff */
|
||
static int tea5757_read(struct bttv *btv)
|
||
{
|
||
unsigned long timeout;
|
||
int value = 0;
|
||
int i;
|
||
|
||
/* better safe than sorry */
|
||
gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
|
||
|
||
if (btv->mbox_ior) {
|
||
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
||
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
||
udelay(5);
|
||
}
|
||
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"tea5757 read");
|
||
|
||
bus_low(btv,btv->mbox_we);
|
||
bus_low(btv,btv->mbox_clk);
|
||
|
||
udelay(10);
|
||
timeout= jiffies + HZ;
|
||
|
||
// wait for DATA line to go low; error if it doesn't
|
||
while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
|
||
schedule();
|
||
if (bus_in(btv,btv->mbox_data)) {
|
||
printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
|
||
return -1;
|
||
}
|
||
|
||
dprintk("bttv%d: tea5757:",btv->c.nr);
|
||
for(i = 0; i < 24; i++)
|
||
{
|
||
udelay(5);
|
||
bus_high(btv,btv->mbox_clk);
|
||
udelay(5);
|
||
dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
|
||
bus_low(btv,btv->mbox_clk);
|
||
value <<= 1;
|
||
value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
|
||
dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
|
||
}
|
||
dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
|
||
return value;
|
||
}
|
||
|
||
static int tea5757_write(struct bttv *btv, int value)
|
||
{
|
||
int i;
|
||
int reg = value;
|
||
|
||
gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
|
||
|
||
if (btv->mbox_ior) {
|
||
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
||
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
||
udelay(5);
|
||
}
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"tea5757 write");
|
||
|
||
dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
|
||
bus_low(btv,btv->mbox_clk);
|
||
bus_high(btv,btv->mbox_we);
|
||
for(i = 0; i < 25; i++)
|
||
{
|
||
if (reg & 0x1000000)
|
||
bus_high(btv,btv->mbox_data);
|
||
else
|
||
bus_low(btv,btv->mbox_data);
|
||
reg <<= 1;
|
||
bus_high(btv,btv->mbox_clk);
|
||
udelay(10);
|
||
bus_low(btv,btv->mbox_clk);
|
||
udelay(10);
|
||
}
|
||
bus_low(btv,btv->mbox_we); /* unmute !!! */
|
||
return 0;
|
||
}
|
||
|
||
void tea5757_set_freq(struct bttv *btv, unsigned short freq)
|
||
{
|
||
dprintk("tea5757_set_freq %d\n",freq);
|
||
tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
|
||
#if 0
|
||
/* breaks Miro PCTV */
|
||
value = tea5757_read(btv);
|
||
dprintk("bttv%d: tea5757 readback=0x%x\n",btv->c.nr,value);
|
||
#endif
|
||
}
|
||
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* winview */
|
||
|
||
void winview_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
|
||
int bits_out, loops, vol, data;
|
||
|
||
if (!set) {
|
||
/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
|
||
v->flags |= VIDEO_AUDIO_VOLUME;
|
||
return;
|
||
}
|
||
|
||
/* 32 levels logarithmic */
|
||
vol = 32 - ((v->volume>>11));
|
||
/* units */
|
||
bits_out = (PT2254_DBS_IN_2>>(vol%5));
|
||
/* tens */
|
||
bits_out |= (PT2254_DBS_IN_10>>(vol/5));
|
||
bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
|
||
data = gpio_read();
|
||
data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
|
||
WINVIEW_PT2254_STROBE);
|
||
for (loops = 17; loops >= 0 ; loops--) {
|
||
if (bits_out & (1<<loops))
|
||
data |= WINVIEW_PT2254_DATA;
|
||
else
|
||
data &= ~WINVIEW_PT2254_DATA;
|
||
gpio_write(data);
|
||
udelay(5);
|
||
data |= WINVIEW_PT2254_CLK;
|
||
gpio_write(data);
|
||
udelay(5);
|
||
data &= ~WINVIEW_PT2254_CLK;
|
||
gpio_write(data);
|
||
}
|
||
data |= WINVIEW_PT2254_STROBE;
|
||
data &= ~WINVIEW_PT2254_DATA;
|
||
gpio_write(data);
|
||
udelay(10);
|
||
data &= ~WINVIEW_PT2254_STROBE;
|
||
gpio_write(data);
|
||
}
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* mono/stereo control for various cards (which don't use i2c chips but */
|
||
/* connect something to the GPIO pins */
|
||
|
||
static void
|
||
gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
unsigned int con = 0;
|
||
|
||
if (set) {
|
||
gpio_inout(0x300, 0x300);
|
||
if (v->mode & VIDEO_SOUND_LANG1)
|
||
con = 0x000;
|
||
if (v->mode & VIDEO_SOUND_LANG2)
|
||
con = 0x300;
|
||
if (v->mode & VIDEO_SOUND_STEREO)
|
||
con = 0x200;
|
||
// if (v->mode & VIDEO_SOUND_MONO)
|
||
// con = 0x100;
|
||
gpio_bits(0x300, con);
|
||
} else {
|
||
v->mode = VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
}
|
||
}
|
||
|
||
static void
|
||
gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
unsigned int val, con;
|
||
|
||
#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
|
||
if (btv->radio_user)
|
||
return;
|
||
#else
|
||
if (btv->radio)
|
||
return;
|
||
#endif
|
||
|
||
val = gpio_read();
|
||
if (set) {
|
||
con = 0x000;
|
||
if (v->mode & VIDEO_SOUND_LANG2) {
|
||
if (v->mode & VIDEO_SOUND_LANG1) {
|
||
/* LANG1 + LANG2 */
|
||
con = 0x100;
|
||
}
|
||
else {
|
||
/* LANG2 */
|
||
con = 0x300;
|
||
}
|
||
}
|
||
if (con != (val & 0x300)) {
|
||
gpio_bits(0x300, con);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"gvbctv5pci");
|
||
}
|
||
} else {
|
||
switch (val & 0x70) {
|
||
case 0x10:
|
||
v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
break;
|
||
case 0x30:
|
||
v->mode = VIDEO_SOUND_LANG2;
|
||
break;
|
||
case 0x50:
|
||
v->mode = VIDEO_SOUND_LANG1;
|
||
break;
|
||
case 0x60:
|
||
v->mode = VIDEO_SOUND_STEREO;
|
||
break;
|
||
case 0x70:
|
||
v->mode = VIDEO_SOUND_MONO;
|
||
break;
|
||
default:
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
}
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
|
||
* I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
|
||
* 0xdde enables mono and 0xccd enables sap
|
||
*
|
||
* Petr Vandrovec <VANDROVE@vc.cvut.cz>
|
||
* P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
|
||
* input/output sound connection, so both must be set for output mode.
|
||
*
|
||
* Looks like it's needed only for the "tvphone", the "tvphone 98"
|
||
* handles this with a tda9840
|
||
*
|
||
*/
|
||
static void
|
||
avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
int val = 0;
|
||
|
||
if (set) {
|
||
if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
|
||
val = 0x02;
|
||
if (v->mode & VIDEO_SOUND_STEREO)
|
||
val = 0x01;
|
||
if (val) {
|
||
gpio_bits(0x03,val);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"avermedia");
|
||
}
|
||
} else {
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1;
|
||
return;
|
||
}
|
||
}
|
||
|
||
static void
|
||
avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
int val = 0;
|
||
|
||
if (set) {
|
||
if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
|
||
val = 0x01;
|
||
if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
|
||
val = 0x02;
|
||
btaor(val, ~0x03, BT848_GPIO_DATA);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"avermedia");
|
||
} else {
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* Lifetec 9415 handling */
|
||
static void
|
||
lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
int val = 0;
|
||
|
||
if (gpio_read() & 0x4000) {
|
||
v->mode = VIDEO_SOUND_MONO;
|
||
return;
|
||
}
|
||
|
||
if (set) {
|
||
if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
|
||
val = 0x0080;
|
||
if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
|
||
val = 0x0880;
|
||
if ((v->mode & VIDEO_SOUND_LANG1) ||
|
||
(v->mode & VIDEO_SOUND_MONO))
|
||
val = 0;
|
||
gpio_bits(0x0880, val);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"lt9415");
|
||
} else {
|
||
/* autodetect doesn't work with this card :-( */
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
return;
|
||
}
|
||
}
|
||
|
||
// TDA9821 on TerraTV+ Bt848, Bt878
|
||
static void
|
||
terratv_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
unsigned int con = 0;
|
||
|
||
if (set) {
|
||
gpio_inout(0x180000,0x180000);
|
||
if (v->mode & VIDEO_SOUND_LANG2)
|
||
con = 0x080000;
|
||
if (v->mode & VIDEO_SOUND_STEREO)
|
||
con = 0x180000;
|
||
gpio_bits(0x180000, con);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"terratv");
|
||
} else {
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
}
|
||
}
|
||
|
||
static void
|
||
winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
unsigned long val = 0;
|
||
|
||
if (set) {
|
||
/*btor (0xc32000, BT848_GPIO_OUT_EN);*/
|
||
if (v->mode & VIDEO_SOUND_MONO) /* Mono */
|
||
val = 0x420000;
|
||
if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
|
||
val = 0x420000;
|
||
if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
|
||
val = 0x410000;
|
||
if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
|
||
val = 0x020000;
|
||
if (val) {
|
||
gpio_bits(0x430000, val);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"winfast2000");
|
||
}
|
||
} else {
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Dariusz Kowalewski <darekk@automex.pl>
|
||
* sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
|
||
* revision 9B has on-board TDA9874A sound decoder).
|
||
*
|
||
* Note: There are card variants without tda9874a. Forcing the "stereo sound route"
|
||
* will mute this cards.
|
||
*/
|
||
static void
|
||
pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
unsigned int val = 0;
|
||
|
||
#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
|
||
if (btv->radio_user)
|
||
return;
|
||
#else
|
||
if (btv->radio)
|
||
return;
|
||
#endif
|
||
|
||
if (set) {
|
||
if (v->mode & VIDEO_SOUND_MONO) {
|
||
val = 0x01;
|
||
}
|
||
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|
||
|| (v->mode & VIDEO_SOUND_STEREO)) {
|
||
val = 0x02;
|
||
}
|
||
if (val) {
|
||
gpio_bits(0x03,val);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"pvbt878p9b");
|
||
}
|
||
} else {
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Dariusz Kowalewski <darekk@automex.pl>
|
||
* sound control for FlyVideo 2000S (with tda9874 decoder)
|
||
* based on pvbt878p9b_audio() - this is not tested, please fix!!!
|
||
*/
|
||
static void
|
||
fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
unsigned int val = 0xffff;
|
||
|
||
#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
|
||
if (btv->radio_user)
|
||
return;
|
||
#else
|
||
if (btv->radio)
|
||
return;
|
||
#endif
|
||
if (set) {
|
||
if (v->mode & VIDEO_SOUND_MONO) {
|
||
val = 0x0000;
|
||
}
|
||
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|
||
|| (v->mode & VIDEO_SOUND_STEREO)) {
|
||
val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
|
||
}
|
||
if (val != 0xffff) {
|
||
gpio_bits(0x1800, val);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"fv2000s");
|
||
}
|
||
} else {
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
}
|
||
}
|
||
|
||
/*
|
||
* sound control for Canopus WinDVR PCI
|
||
* Masaki Suzuki <masaki@btree.org>
|
||
*/
|
||
static void
|
||
windvr_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
unsigned long val = 0;
|
||
|
||
if (set) {
|
||
if (v->mode & VIDEO_SOUND_MONO)
|
||
val = 0x040000;
|
||
if (v->mode & VIDEO_SOUND_LANG1)
|
||
val = 0;
|
||
if (v->mode & VIDEO_SOUND_LANG2)
|
||
val = 0x100000;
|
||
if (v->mode & VIDEO_SOUND_STEREO)
|
||
val = 0;
|
||
if (val) {
|
||
gpio_bits(0x140000, val);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv,"windvr");
|
||
}
|
||
} else {
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
}
|
||
}
|
||
|
||
/*
|
||
* sound control for AD-TVK503
|
||
* Hiroshi Takekawa <sian@big.or.jp>
|
||
*/
|
||
static void
|
||
adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
|
||
{
|
||
unsigned int con = 0xffffff;
|
||
|
||
//btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
|
||
|
||
if (set) {
|
||
//btor(***, BT848_GPIO_OUT_EN);
|
||
if (v->mode & VIDEO_SOUND_LANG1)
|
||
con = 0x00000000;
|
||
if (v->mode & VIDEO_SOUND_LANG2)
|
||
con = 0x00180000;
|
||
if (v->mode & VIDEO_SOUND_STEREO)
|
||
con = 0x00000000;
|
||
if (v->mode & VIDEO_SOUND_MONO)
|
||
con = 0x00060000;
|
||
if (con != 0xffffff) {
|
||
gpio_bits(0x1e0000,con);
|
||
if (bttv_gpio)
|
||
bttv_gpio_tracking(btv, "adtvk503");
|
||
}
|
||
} else {
|
||
v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
|
||
VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
|
||
}
|
||
}
|
||
|
||
/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
|
||
*
|
||
* This is needed because rv605 don't use a normal multiplex, but a crosspoint
|
||
* switch instead (CD22M3494E). This IC can have multiple active connections
|
||
* between Xn (input) and Yn (output) pins. We need to clear any existing
|
||
* connection prior to establish a new one, pulsing the STROBE pin.
|
||
*
|
||
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
|
||
* GPIO pins are wired as:
|
||
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
|
||
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
|
||
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
|
||
* GPIO[8] - - P3[5] (microcontroler)
|
||
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
|
||
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
|
||
* GPINTR - - P3[4] (microcontroler)
|
||
*
|
||
* The microcontroler is a 80C32 like. It should be possible to change xpoint
|
||
* configuration either directly (as we are doing) or using the microcontroler
|
||
* which is also wired to I2C interface. I have no further info on the
|
||
* microcontroler features, one would need to disassembly the firmware.
|
||
* note: the vendor refused to give any information on this product, all
|
||
* that stuff was found using a multimeter! :)
|
||
*/
|
||
static void rv605_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
/* reset all conections */
|
||
gpio_bits(0x200,0x200);
|
||
mdelay(1);
|
||
gpio_bits(0x200,0x000);
|
||
mdelay(1);
|
||
|
||
/* create a new conection */
|
||
gpio_bits(0x480,0x080);
|
||
gpio_bits(0x480,0x480);
|
||
mdelay(1);
|
||
gpio_bits(0x480,0x080);
|
||
mdelay(1);
|
||
}
|
||
|
||
/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
|
||
*
|
||
* The CS16 (available on eBay cheap) is a PCI board with four Fusion
|
||
* 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
|
||
* chips, ten eight input analog multiplexors, a not chip and a few
|
||
* other components.
|
||
*
|
||
* 16 inputs on a secondary bracket are provided and can be selected
|
||
* from each of the four capture chips. Two of the eight input
|
||
* multiplexors are used to select from any of the 16 input signals.
|
||
*
|
||
* Unsupported hardware capabilities:
|
||
* . A video output monitor on the secondary bracket can be selected from
|
||
* one of the 878A chips.
|
||
* . Another passthrough but I haven't spent any time investigating it.
|
||
* . Digital I/O (logic level connected to GPIO) is available from an
|
||
* onboard header.
|
||
*
|
||
* The on chip input mux should always be set to 2.
|
||
* GPIO[16:19] - Video input selection
|
||
* GPIO[0:3] - Video output monitor select (only available from one 878A)
|
||
* GPIO[?:?] - Digital I/O.
|
||
*
|
||
* There is an ATMEL microcontroller with an 8031 core on board. I have not
|
||
* determined what function (if any) it provides. With the microcontroller
|
||
* and sync seperator chips a guess is that it might have to do with video
|
||
* switching and maybe some digital I/O.
|
||
*/
|
||
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
/* video mux */
|
||
gpio_bits(0x0f0000, input << 16);
|
||
}
|
||
|
||
static void tibetCS16_init(struct bttv *btv)
|
||
{
|
||
/* enable gpio bits, mask obtained via btSpy */
|
||
gpio_inout(0xffffff, 0x0f7fff);
|
||
gpio_write(0x0f7fff);
|
||
}
|
||
|
||
/*
|
||
* The following routines for the Kodicom-4400r get a little mind-twisting.
|
||
* There is a "master" controller and three "slave" controllers, together
|
||
* an analog switch which connects any of 16 cameras to any of the BT87A's.
|
||
* The analog switch is controlled by the "master", but the detection order
|
||
* of the four BT878A chips is in an order which I just don't understand.
|
||
* The "master" is actually the second controller to be detected. The
|
||
* logic on the board uses logical numbers for the 4 controlers, but
|
||
* those numbers are different from the detection sequence. When working
|
||
* with the analog switch, we need to "map" from the detection sequence
|
||
* over to the board's logical controller number. This mapping sequence
|
||
* is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
|
||
* unit 3, the second (which is the master) is logical unit 0, etc.
|
||
* We need to maintain the status of the analog switch (which of the 16
|
||
* cameras is connected to which of the 4 controllers). Rather than
|
||
* add to the bttv structure for this, we use the data reserved for
|
||
* the mbox (unused for this card type).
|
||
*/
|
||
|
||
/*
|
||
* First a routine to set the analog switch, which controls which camera
|
||
* is routed to which controller. The switch comprises an X-address
|
||
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
|
||
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
|
||
* A data value (gpio bit 7) of '1' enables the switch, and '0' disables
|
||
* the switch. A STROBE bit (gpio bit 8) latches the data value into the
|
||
* specified address. The idea is to set the address and data, then bring
|
||
* STROBE high, and finally bring STROBE back to low.
|
||
*/
|
||
static void kodicom4400r_write(struct bttv *btv,
|
||
unsigned char xaddr,
|
||
unsigned char yaddr,
|
||
unsigned char data) {
|
||
unsigned int udata;
|
||
|
||
udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
|
||
gpio_bits(0x1ff, udata); /* write ADDR and DAT */
|
||
gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
|
||
gpio_bits(0x1ff, udata); /* strobe low */
|
||
}
|
||
|
||
/*
|
||
* Next the mux select. Both the "master" and "slave" 'cards' (controllers)
|
||
* use this routine. The routine finds the "master" for the card, maps
|
||
* the controller number from the detected position over to the logical
|
||
* number, writes the appropriate data to the analog switch, and housekeeps
|
||
* the local copy of the switch information. The parameter 'input' is the
|
||
* requested camera number (0 - 15).
|
||
*/
|
||
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
char *sw_status;
|
||
int xaddr, yaddr;
|
||
struct bttv *mctlr;
|
||
static unsigned char map[4] = {3, 0, 2, 1};
|
||
|
||
mctlr = master[btv->c.nr];
|
||
if (mctlr == NULL) { /* ignore if master not yet detected */
|
||
return;
|
||
}
|
||
yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
|
||
yaddr = map[yaddr];
|
||
sw_status = (char *)(&mctlr->mbox_we);
|
||
xaddr = input & 0xf;
|
||
/* Check if the controller/camera pair has changed, else ignore */
|
||
if (sw_status[yaddr] != xaddr)
|
||
{
|
||
/* "open" the old switch, "close" the new one, save the new */
|
||
kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
|
||
sw_status[yaddr] = xaddr;
|
||
kodicom4400r_write(mctlr, xaddr, yaddr, 1);
|
||
}
|
||
}
|
||
|
||
/*
|
||
* During initialisation, we need to reset the analog switch. We
|
||
* also preset the switch to map the 4 connectors on the card to the
|
||
* *user's* (see above description of kodicom4400r_muxsel) channels
|
||
* 0 through 3
|
||
*/
|
||
static void kodicom4400r_init(struct bttv *btv)
|
||
{
|
||
char *sw_status = (char *)(&btv->mbox_we);
|
||
int ix;
|
||
|
||
gpio_inout(0x0003ff, 0x0003ff);
|
||
gpio_write(1 << 9); /* reset MUX */
|
||
gpio_write(0);
|
||
/* Preset camera 0 to the 4 controllers */
|
||
for (ix=0; ix<4; ix++) {
|
||
sw_status[ix] = ix;
|
||
kodicom4400r_write(btv, ix, ix, 1);
|
||
}
|
||
/*
|
||
* Since this is the "master", we need to set up the
|
||
* other three controller chips' pointers to this structure
|
||
* for later use in the muxsel routine.
|
||
*/
|
||
if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
|
||
return;
|
||
master[btv->c.nr-1] = btv;
|
||
master[btv->c.nr] = btv;
|
||
master[btv->c.nr+1] = btv;
|
||
master[btv->c.nr+2] = btv;
|
||
}
|
||
|
||
// The Grandtec X-Guard framegrabber card uses two Dual 4-channel
|
||
// video multiplexers to provide up to 16 video inputs. These
|
||
// multiplexers are controlled by the lower 8 GPIO pins of the
|
||
// bt878. The multiplexers probably Pericom PI5V331Q or similar.
|
||
|
||
// xxx0 is pin xxx of multiplexer U5,
|
||
// yyy1 is pin yyy of multiplexer U2
|
||
|
||
#define ENA0 0x01
|
||
#define ENB0 0x02
|
||
#define ENA1 0x04
|
||
#define ENB1 0x08
|
||
|
||
#define IN10 0x10
|
||
#define IN00 0x20
|
||
#define IN11 0x40
|
||
#define IN01 0x80
|
||
|
||
static void xguard_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
static const int masks[] = {
|
||
ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
|
||
ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
|
||
ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
|
||
ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
|
||
};
|
||
gpio_write(masks[input%16]);
|
||
}
|
||
static void picolo_tetra_init(struct bttv *btv)
|
||
{
|
||
/*This is the video input redirection fonctionality : I DID NOT USED IT. */
|
||
btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
|
||
btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
|
||
}
|
||
static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
|
||
{
|
||
|
||
dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
|
||
/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
|
||
/*GPIO[20]&GPIO[21] used to choose the right input*/
|
||
btwrite (input<<20,BT848_GPIO_DATA);
|
||
|
||
}
|
||
|
||
/*
|
||
* ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
|
||
*
|
||
* The IVC120G security card has 4 i2c controlled TDA8540 matrix
|
||
* swichers to provide 16 channels to MUX0. The TDA8540's have
|
||
* 4 indepedant outputs and as such the IVC120G also has the
|
||
* optional "Monitor Out" bus. This allows the card to be looking
|
||
* at one input while the monitor is looking at another.
|
||
*
|
||
* Since I've couldn't be bothered figuring out how to add an
|
||
* independant muxsel for the monitor bus, I've just set it to
|
||
* whatever the card is looking at.
|
||
*
|
||
* OUT0 of the TDA8540's is connected to MUX0 (0x03)
|
||
* OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
|
||
*
|
||
* TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
|
||
* TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
|
||
* TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
|
||
* TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
|
||
*
|
||
*/
|
||
|
||
/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
|
||
#define I2C_TDA8540 0x90
|
||
#define I2C_TDA8540_ALT1 0x92
|
||
#define I2C_TDA8540_ALT2 0x94
|
||
#define I2C_TDA8540_ALT3 0x96
|
||
#define I2C_TDA8540_ALT4 0x98
|
||
#define I2C_TDA8540_ALT5 0x9a
|
||
#define I2C_TDA8540_ALT6 0x9c
|
||
|
||
static void ivc120_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
// Simple maths
|
||
int key = input % 4;
|
||
int matrix = input / 4;
|
||
|
||
dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
|
||
btv->c.nr, input, matrix, key);
|
||
|
||
// Handles the input selection on the TDA8540's
|
||
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
|
||
((matrix == 3) ? (key | key << 2) : 0x00), 1);
|
||
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
|
||
((matrix == 0) ? (key | key << 2) : 0x00), 1);
|
||
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
|
||
((matrix == 1) ? (key | key << 2) : 0x00), 1);
|
||
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
|
||
((matrix == 2) ? (key | key << 2) : 0x00), 1);
|
||
|
||
// Handles the output enables on the TDA8540's
|
||
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
|
||
((matrix == 3) ? 0x03 : 0x00), 1); // 13 - 16
|
||
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
|
||
((matrix == 0) ? 0x03 : 0x00), 1); // 1-4
|
||
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
|
||
((matrix == 1) ? 0x03 : 0x00), 1); // 5-8
|
||
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
|
||
((matrix == 2) ? 0x03 : 0x00), 1); // 9-12
|
||
|
||
// Selects MUX0 for input on the 878
|
||
btaor((0)<<5, ~(3<<5), BT848_IFORM);
|
||
}
|
||
|
||
|
||
/* PXC200 muxsel helper
|
||
* luke@syseng.anu.edu.au
|
||
* another transplant
|
||
* from Alessandro Rubini (rubini@linux.it)
|
||
*
|
||
* There are 4 kinds of cards:
|
||
* PXC200L which is bt848
|
||
* PXC200F which is bt848 with PIC controlling mux
|
||
* PXC200AL which is bt878
|
||
* PXC200AF which is bt878 with PIC controlling mux
|
||
*/
|
||
#define PX_CFG_PXC200F 0x01
|
||
#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
|
||
#define PX_I2C_PIC 0x0f
|
||
#define PX_PXC200A_CARDID 0x200a1295
|
||
#define PX_I2C_CMD_CFG 0x00
|
||
|
||
static void PXC200_muxsel(struct bttv *btv, unsigned int input)
|
||
{
|
||
int rc;
|
||
long mux;
|
||
int bitmask;
|
||
unsigned char buf[2];
|
||
|
||
/* Read PIC config to determine if this is a PXC200F */
|
||
/* PX_I2C_CMD_CFG*/
|
||
buf[0]=0;
|
||
buf[1]=0;
|
||
rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
|
||
if (rc) {
|
||
printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
|
||
/* not PXC ? do nothing */
|
||
return;
|
||
}
|
||
|
||
rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
|
||
if (!(rc & PX_CFG_PXC200F)) {
|
||
printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
|
||
return;
|
||
}
|
||
|
||
|
||
/* The multiplexer in the 200F is handled by the GPIO port */
|
||
/* get correct mapping between inputs */
|
||
/* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
|
||
/* ** not needed!? */
|
||
mux = input;
|
||
|
||
/* make sure output pins are enabled */
|
||
/* bitmask=0x30f; */
|
||
bitmask=0x302;
|
||
/* check whether we have a PXC200A */
|
||
if (btv->cardid == PX_PXC200A_CARDID) {
|
||
bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
|
||
bitmask |= 7<<4; /* the DAC */
|
||
}
|
||
btwrite(bitmask, BT848_GPIO_OUT_EN);
|
||
|
||
bitmask = btread(BT848_GPIO_DATA);
|
||
if (btv->cardid == PX_PXC200A_CARDID)
|
||
bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
|
||
else /* older device */
|
||
bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
|
||
btwrite(bitmask,BT848_GPIO_DATA);
|
||
|
||
/*
|
||
* Was "to be safe, set the bt848 to input 0"
|
||
* Actually, since it's ok at load time, better not messing
|
||
* with these bits (on PXC200AF you need to set mux 2 here)
|
||
*
|
||
* needed because bttv-driver sets mux before calling this function
|
||
*/
|
||
if (btv->cardid == PX_PXC200A_CARDID)
|
||
btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
|
||
else /* older device */
|
||
btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
|
||
|
||
printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
|
||
}
|
||
|
||
/* ----------------------------------------------------------------------- */
|
||
/* motherboard chipset specific stuff */
|
||
|
||
void __devinit bttv_check_chipset(void)
|
||
{
|
||
int pcipci_fail = 0;
|
||
struct pci_dev *dev = NULL;
|
||
|
||
if (pci_pci_problems & PCIPCI_FAIL)
|
||
pcipci_fail = 1;
|
||
if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
|
||
triton1 = 1;
|
||
if (pci_pci_problems & PCIPCI_VSFX)
|
||
vsfx = 1;
|
||
#ifdef PCIPCI_ALIMAGIK
|
||
if (pci_pci_problems & PCIPCI_ALIMAGIK)
|
||
latency = 0x0A;
|
||
#endif
|
||
|
||
#if 0
|
||
/* print which chipset we have */
|
||
while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
|
||
printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev));
|
||
#endif
|
||
|
||
/* print warnings about any quirks found */
|
||
if (triton1)
|
||
printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
|
||
if (vsfx)
|
||
printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
|
||
if (pcipci_fail) {
|
||
printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
|
||
if (UNSET == no_overlay) {
|
||
printk(KERN_WARNING "bttv: going to disable overlay.\n");
|
||
no_overlay = 1;
|
||
}
|
||
}
|
||
if (UNSET != latency)
|
||
printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
|
||
|
||
while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL,
|
||
PCI_DEVICE_ID_INTEL_82441, dev))) {
|
||
unsigned char b;
|
||
pci_read_config_byte(dev, 0x53, &b);
|
||
if (bttv_debug)
|
||
printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
|
||
"bufcon=0x%02x\n",b);
|
||
}
|
||
}
|
||
|
||
int __devinit bttv_handle_chipset(struct bttv *btv)
|
||
{
|
||
unsigned char command;
|
||
|
||
if (!triton1 && !vsfx && UNSET == latency)
|
||
return 0;
|
||
|
||
if (bttv_verbose) {
|
||
if (triton1)
|
||
printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
|
||
if (vsfx && btv->id >= 878)
|
||
printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
|
||
if (UNSET != latency)
|
||
printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
|
||
btv->c.nr,latency);
|
||
}
|
||
|
||
if (btv->id < 878) {
|
||
/* bt848 (mis)uses a bit in the irq mask for etbf */
|
||
if (triton1)
|
||
btv->triton1 = BT848_INT_ETBF;
|
||
} else {
|
||
/* bt878 has a bit in the pci config space for it */
|
||
pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
|
||
if (triton1)
|
||
command |= BT878_EN_TBFX;
|
||
if (vsfx)
|
||
command |= BT878_EN_VSFX;
|
||
pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
|
||
}
|
||
if (UNSET != latency)
|
||
pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
|
||
return 0;
|
||
}
|
||
|
||
|
||
/*
|
||
* Local variables:
|
||
* c-basic-offset: 8
|
||
* End:
|
||
*/
|