Holger Brunck 54e9e08749 net/wan/fsl_ucc_hdlc: call qe_setbrg only for loopback mode ... We can't assume that we are always in loopback mode if rx and tx clock have the same clock source. If we want to use HDLC busmode we also have the same clock source but we are not in loopback mode. So move the setting of the baudrate generator after the check for property for the loopback mode. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2017-05-18 10:28:38 -04:00
..
lmc	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
.gitignore
c101.c	net: use core MTU range checking in WAN drivers	2016-10-20 14:51:09 -04:00
cosa.c	Annotate hardware config module parameters in drivers/net/wan/	2017-04-20 12:02:32 +01:00
cosa.h
dlci.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
dscc4.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
farsync.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
farsync.h
fsl_ucc_hdlc.c	net/wan/fsl_ucc_hdlc: call qe_setbrg only for loopback mode	2017-05-18 10:28:38 -04:00
fsl_ucc_hdlc.h	drivers/net/fsl_ucc: Do not prefix header guard with CONFIG_	2016-06-08 11:07:17 -07:00
hd64570.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
hd64570.h	net: Spelling s/transmition/transmission/	2014-01-14 17:11:26 -08:00
hd64572.c	drivers: net: generalize napi_complete_done()	2017-01-30 15:10:42 -05:00
hd64572.h	net: Spelling s/transmition/transmission/	2014-01-14 17:11:26 -08:00
hdlc.c	net: use core MTU range checking in WAN drivers	2016-10-20 14:51:09 -04:00
hdlc_cisco.c	WAN: HDLC: Call notifiers before and after changing device type	2015-12-05 17:41:42 -05:00
hdlc_fr.c	net: use core MTU range checking in WAN drivers	2016-10-20 14:51:09 -04:00
hdlc_ppp.c	WAN: HDLC: Call notifiers before and after changing device type	2015-12-05 17:41:42 -05:00
hdlc_raw.c	WAN: HDLC: Call notifiers before and after changing device type	2015-12-05 17:41:42 -05:00
hdlc_raw_eth.c	net: make struct net_device::tx_queue_len unsigned int	2017-05-18 10:19:30 -04:00
hdlc_x25.c	WAN: HDLC: Call notifiers before and after changing device type	2015-12-05 17:41:42 -05:00
hostess_sv11.c	Annotate hardware config module parameters in drivers/net/wan/	2017-04-20 12:02:32 +01:00
ixp4xx_hss.c	net: use core MTU range checking in WAN drivers	2016-10-20 14:51:09 -04:00
Kconfig	net: wan: slic_ds26522: Allow driver to built if COMPILE_TEST is enabled	2016-10-14 10:11:49 -04:00
lapbether.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
Makefile	Maxim/driver: Add driver for maxim ds26522	2016-06-29 04:05:14 -04:00
n2.c	net: use core MTU range checking in WAN drivers	2016-10-20 14:51:09 -04:00
pc300too.c	wan: pc300too: abort path on failure	2017-04-24 15:51:31 -04:00
pci200syn.c	net: use core MTU range checking in WAN drivers	2016-10-20 14:51:09 -04:00
sbni.c	Annotate hardware config module parameters in drivers/net/wan/	2017-04-20 12:02:32 +01:00
sbni.h
sdla.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
sealevel.c	Annotate hardware config module parameters in drivers/net/wan/	2017-04-20 12:02:32 +01:00
slic_ds26522.c	net: wan: slic_ds26522: Remove .owner field for driver	2017-02-07 11:41:15 -05:00
slic_ds26522.h	Maxim/driver: Add driver for maxim ds26522	2016-06-29 04:05:14 -04:00
wanxl.c	net: use core MTU range checking in WAN drivers	2016-10-20 14:51:09 -04:00
wanxl.h
wanxlfw.inc_shipped
wanxlfw.S	Fix the wanxl firmware to include missing constants	2012-11-09 16:28:37 -05:00
x25_asy.c	net: use core MTU range checking in WAN drivers	2016-10-20 14:51:09 -04:00
x25_asy.h	wan: Remove extern from function prototypes	2013-09-24 16:40:19 -07:00
z85230.c	Doc: z8530book: Fix typo in API-z8530-sync-txdma-open.html	2015-07-10 23:45:31 -07:00
z85230.h	wan: Remove extern from function prototypes	2013-09-24 16:40:19 -07:00