redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/acpi/acpica/evxfgpe.c
Lv Zheng 2eedd3d839 ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model 
ACPICA commit da9a83e1a845f2d7332bdbc0632466b2595e5424

For acpi_set_gpe()/acpi_enable_gpe(), our target is to purify them to be APIs
that can be used for various GPE handling models, so we need them to be
pure GPE enabling APIs. GPE enabling/disabling has 2 use cases:
1. Driver may permanently enable/disable GPEs according to the usage
   counts.
   1. When upper layers (the users of the driver) submit requests to the
      driver, it means they care about the underlying hardware. GPE need
      to be enabled for the first request submission and disabled for the
      last request completion.
   2. When the GPE is shared between 2+ silicon logics. GPE need to be
      enabled for either silicon logic's driver and disabled when all of
      the drivers are not started.
   For these cases, acpi_enable_gpe()/acpi_disable_gpe() should be used. When
   the usage count is increased from 0 to 1, the GPE is enabled and it is
   disabled when the usage count is decrased from 1 to 0.
2. Driver may temporarily disables the GPE to enter an GPE polling mode and
   wants to re-enable it later.
   1. Prevent GPE storming: when a driver cannot fully solve the condition
      that triggered the GPE in the GPE context, in order not to trigger
      GPE storm, driver has to disable GPE to switch into the polling mode
      and re-enables it in the non interrupt context after the storming
      condition is cleared.
   2. Meet throughput requirement: some IO drivers need to poll hardware
      again and again until nothing indicated instead of just handling once
      for one interruption, this need to be done in the polling mode or the
      IO flood may prevent the GPE handler from returning.
   3. Meet realtime requirement: in order not to block CPU to handle higher
      realtime prioritized GPEs, lower priority GPEs can be handled in the
      polling mode.
   For these cases, acpi_set_gpe() should be used to switch to/from the
   polling mode.

This patch adds unconditional GPE enabling support into acpi_set_gpe() so
that this API can be used by the drivers to switch back from the GPE
polling mode unconditionally.

Originally this function includes GPE clearing logic in it.
First, the GPE clearing is typically used in the GPE handling code to:
1. Acknowledge the GPE when we know there is an edge triggered GPE raised
   and is about to handle it, otherwise the unexpected clearing may lead to
   a GPE loss;
2. Issue actions after we have handled a level triggered GPE, otherwise
   the unexpected clearing may trigger unwanted OSPM actions to the
   hardware (for example, clocking in out-dated write FIFO data).
Thus the GPE clearing is not suitable to be used in the GPE enabling APIs.
Second, the combination of acknowledging and enabling may also not be
expected by the hardware drivers. For GPE clearing, we have a seperate API
acpi_clear_gpe(). There are cases drivers do want the 2 operations to be
split. So splitting these 2 operations could facilitates drivers the
maximum possibilities to achieve success. For a combined one, we already
have acpi_finish_gpe() ready to be invoked.

Given the fact that drivers should complete all outstanding requests before
putting themselves into the sleep states, as this API is executed for
outstanding requests, it should also have nothing to do with the
"RUN"/"WAKE" distinguishing. That's why the acpi_set_gpe(ACPI_GPE_ENABLE)
should not be implemented by acpi_hw_low_set_gpe(ACPI_GPE_CONDITIONAL_ENABLE).

This patch thus converts acpi_set_gpe(ACPI_GPE_ENABLE) into
acpi_hw_low_set_gpe(ACPI_GPE_ENABLE) to achieve a seperate GPE enabling API.
Drivers then are encouraged to use this API when they need to switch
to/from the GPE polling mode.

Note that the acpi_set_gpe()/acpi_finish_gpe() should be first introduced to
Linux using a divergence reduction patch before sending a linuxized version
of this patch. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/da9a83e1
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05 15:34:51 +01:00

953 lines
27 KiB
C
Raw Blame History

/******************************************************************************
*
* Module Name: evxfgpe - External Interfaces for General Purpose Events (GPEs)
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2015, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define EXPORT_ACPI_INTERFACES
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evxfgpe")
#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/*******************************************************************************
*
* FUNCTION: acpi_update_all_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Complete GPE initialization and enable all GPEs that have
* associated _Lxx or _Exx methods and are not pointed to by any
* device _PRW methods (this indicates that these GPEs are
* generally intended for system or device wakeup. Such GPEs
* have to be enabled directly when the devices whose _PRW
* methods point to them are set up for wakeup signaling.)
*
* NOTE: Should be called after any GPEs are added to the system. Primarily,
* after the system _PRW methods have been run, but also after a GPE Block
* Device has been added or if any new GPE methods have been added via a
* dynamic table load.
*
******************************************************************************/
acpi_status acpi_update_all_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_update_all_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (acpi_gbl_all_gpes_initialized) {
goto unlock_and_exit;
}
status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL);
if (ACPI_SUCCESS(status)) {
acpi_gbl_all_gpes_initialized = TRUE;
}
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_update_all_gpes)
/*******************************************************************************
*
* FUNCTION: acpi_enable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
* hardware-enabled.
*
******************************************************************************/
acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_enable_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/*
* Ensure that we have a valid GPE number and that there is some way
* of handling the GPE (handler or a GPE method). In other words, we
* won't allow a valid GPE to be enabled if there is no way to handle it.
*/
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) !=
ACPI_GPE_DISPATCH_NONE) {
status = acpi_ev_add_gpe_reference(gpe_event_info);
} else {
status = AE_NO_HANDLER;
}
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_disable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Remove a reference to a GPE. When the last reference is
* removed, only then is the GPE disabled (for runtime GPEs), or
* the GPE mask bit disabled (for wake GPEs)
*
******************************************************************************/
acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_disable_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
status = acpi_ev_remove_gpe_reference(gpe_event_info) ;
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_set_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
* action - ACPI_GPE_ENABLE or ACPI_GPE_DISABLE
*
* RETURN: Status
*
* DESCRIPTION: Enable or disable an individual GPE. This function bypasses
* the reference count mechanism used in the acpi_enable_gpe(),
* acpi_disable_gpe() interfaces.
* This API is typically used by the GPE raw handler mode driver
* to switch between the polling mode and the interrupt mode after
* the driver has enabled the GPE.
* The APIs should be invoked in this order:
* acpi_enable_gpe() <- Ensure the reference count > 0
* acpi_set_gpe(ACPI_GPE_DISABLE) <- Enter polling mode
* acpi_set_gpe(ACPI_GPE_ENABLE) <- Leave polling mode
* acpi_disable_gpe() <- Decrease the reference count
*
* Note: If a GPE is shared by 2 silicon components, then both the drivers
* should support GPE polling mode or disabling the GPE for long period
* for one driver may break the other. So use it with care since all
* firmware _Lxx/_Exx handlers currently rely on the GPE interrupt mode.
*
******************************************************************************/
acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
struct acpi_gpe_event_info *gpe_event_info;
acpi_status status;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_set_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Perform the action */
switch (action) {
case ACPI_GPE_ENABLE:
status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
break;
case ACPI_GPE_DISABLE:
status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
break;
default:
status = AE_BAD_PARAMETER;
break;
}
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_set_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_mark_gpe_for_wake
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Mark a GPE as having the ability to wake the system. Simply
* sets the ACPI_GPE_CAN_WAKE flag.
*
* Some potential callers of acpi_setup_gpe_for_wake may know in advance that
* there won't be any notify handlers installed for device wake notifications
* from the given GPE (one example is a button GPE in Linux). For these cases,
* acpi_mark_gpe_for_wake should be used instead of acpi_setup_gpe_for_wake.
* This will set the ACPI_GPE_CAN_WAKE flag for the GPE without trying to
* setup implicit wake notification for it (since there's no handler method).
*
******************************************************************************/
acpi_status acpi_mark_gpe_for_wake(acpi_handle gpe_device, u32 gpe_number)
{
struct acpi_gpe_event_info *gpe_event_info;
acpi_status status = AE_BAD_PARAMETER;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_mark_gpe_for_wake);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
/* Mark the GPE as a possible wake event */
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
status = AE_OK;
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_mark_gpe_for_wake)
/*******************************************************************************
*
* FUNCTION: acpi_setup_gpe_for_wake
*
* PARAMETERS: wake_device - Device associated with the GPE (via _PRW)
* gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Mark a GPE as having the ability to wake the system. This
* interface is intended to be used as the host executes the
* _PRW methods (Power Resources for Wake) in the system tables.
* Each _PRW appears under a Device Object (The wake_device), and
* contains the info for the wake GPE associated with the
* wake_device.
*
******************************************************************************/
acpi_status
acpi_setup_gpe_for_wake(acpi_handle wake_device,
acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_namespace_node *device_node;
struct acpi_gpe_notify_info *notify;
struct acpi_gpe_notify_info *new_notify;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);
/* Parameter Validation */
if (!wake_device) {
/*
* By forcing wake_device to be valid, we automatically enable the
* implicit notify feature on all hosts.
*/
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Handle root object case */
if (wake_device == ACPI_ROOT_OBJECT) {
device_node = acpi_gbl_root_node;
} else {
device_node =
ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
}
/* Validate wake_device is of type Device */
if (device_node->type != ACPI_TYPE_DEVICE) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/*
* Allocate a new notify object up front, in case it is needed.
* Memory allocation while holding a spinlock is a big no-no
* on some hosts.
*/
new_notify = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_notify_info));
if (!new_notify) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/*
* If there is no method or handler for this GPE, then the
* wake_device will be notified whenever this GPE fires. This is
* known as an "implicit notify". Note: The GPE is assumed to be
* level-triggered (for windows compatibility).
*/
if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
ACPI_GPE_DISPATCH_NONE) {
/*
* This is the first device for implicit notify on this GPE.
* Just set the flags here, and enter the NOTIFY block below.
*/
gpe_event_info->flags =
(ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED);
}
/*
* If we already have an implicit notify on this GPE, add
* this device to the notify list.
*/
if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) ==
ACPI_GPE_DISPATCH_NOTIFY) {
/* Ensure that the device is not already in the list */
notify = gpe_event_info->dispatch.notify_list;
while (notify) {
if (notify->device_node == device_node) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
notify = notify->next;
}
/* Add this device to the notify list for this GPE */
new_notify->device_node = device_node;
new_notify->next = gpe_event_info->dispatch.notify_list;
gpe_event_info->dispatch.notify_list = new_notify;
new_notify = NULL;
}
/* Mark the GPE as a possible wake event */
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
status = AE_OK;
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
/* Delete the notify object if it was not used above */
if (new_notify) {
ACPI_FREE(new_notify);
}
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)
/*******************************************************************************
*
* FUNCTION: acpi_set_gpe_wake_mask
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
* action - Enable or Disable
*
* RETURN: Status
*
* DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must
* already be marked as a WAKE GPE.
*
******************************************************************************/
acpi_status
acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_gpe_register_info *gpe_register_info;
acpi_cpu_flags flags;
u32 register_bit;
ACPI_FUNCTION_TRACE(acpi_set_gpe_wake_mask);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/*
* Ensure that we have a valid GPE number and that this GPE is in
* fact a wake GPE
*/
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
status = AE_TYPE;
goto unlock_and_exit;
}
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
status = AE_NOT_EXIST;
goto unlock_and_exit;
}
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
/* Perform the action */
switch (action) {
case ACPI_GPE_ENABLE:
ACPI_SET_BIT(gpe_register_info->enable_for_wake,
(u8)register_bit);
break;
case ACPI_GPE_DISABLE:
ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
(u8)register_bit);
break;
default:
ACPI_ERROR((AE_INFO, "%u, Invalid action", action));
status = AE_BAD_PARAMETER;
break;
}
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_set_gpe_wake_mask)
/*******************************************************************************
*
* FUNCTION: acpi_clear_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Clear an ACPI event (general purpose)
*
******************************************************************************/
acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_clear_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
status = acpi_hw_clear_gpe(gpe_event_info);
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_clear_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_get_gpe_status
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
* event_status - Where the current status of the event
* will be returned
*
* RETURN: Status
*
* DESCRIPTION: Get the current status of a GPE (signalled/not_signalled)
*
******************************************************************************/
acpi_status
acpi_get_gpe_status(acpi_handle gpe_device,
u32 gpe_number, acpi_event_status *event_status)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_get_gpe_status);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Obtain status on the requested GPE number */
status = acpi_hw_get_gpe_status(gpe_event_info, event_status);
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_get_gpe_status)
/*******************************************************************************
*
* FUNCTION: acpi_finish_gpe
*
* PARAMETERS: gpe_device - Namespace node for the GPE Block
* (NULL for FADT defined GPEs)
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Clear and conditionally reenable a GPE. This completes the GPE
* processing. Intended for use by asynchronous host-installed
* GPE handlers. The GPE is only reenabled if the enable_for_run bit
* is set in the GPE info.
*
******************************************************************************/
acpi_status acpi_finish_gpe(acpi_handle gpe_device, u32 gpe_number)
{
struct acpi_gpe_event_info *gpe_event_info;
acpi_status status;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_finish_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
status = acpi_ev_finish_gpe(gpe_event_info);
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_finish_gpe)
/******************************************************************************
*
* FUNCTION: acpi_disable_all_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Disable and clear all GPEs in all GPE blocks
*
******************************************************************************/
acpi_status acpi_disable_all_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_disable_all_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_hw_disable_all_gpes();
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_disable_all_gpes)
/******************************************************************************
*
* FUNCTION: acpi_enable_all_runtime_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status acpi_enable_all_runtime_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_enable_all_runtime_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_hw_enable_all_runtime_gpes();
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes)
/******************************************************************************
*
* FUNCTION: acpi_enable_all_wakeup_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Enable all "wakeup" GPEs and disable all of the other GPEs, in
* all GPE blocks.
*
******************************************************************************/
acpi_status acpi_enable_all_wakeup_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_enable_all_wakeup_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_hw_enable_all_wakeup_gpes();
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_all_wakeup_gpes)
/*******************************************************************************
*
* FUNCTION: acpi_install_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
* gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* interrupt_number - H/W interrupt for the block
*
* RETURN: Status
*
* DESCRIPTION: Create and Install a block of GPE registers. The GPEs are not
* enabled here.
*
******************************************************************************/
acpi_status
acpi_install_gpe_block(acpi_handle gpe_device,
struct acpi_generic_address *gpe_block_address,
u32 register_count, u32 interrupt_number)
{
acpi_status status;
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
struct acpi_gpe_block_info *gpe_block;
ACPI_FUNCTION_TRACE(acpi_install_gpe_block);
if ((!gpe_device) || (!gpe_block_address) || (!register_count)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(gpe_device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Validate the parent device */
if (node->type != ACPI_TYPE_DEVICE) {
status = AE_TYPE;
goto unlock_and_exit;
}
if (node->object) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
/*
* For user-installed GPE Block Devices, the gpe_block_base_number
* is always zero
*/
status = acpi_ev_create_gpe_block(node, gpe_block_address->address,
gpe_block_address->space_id,
register_count, 0, interrupt_number,
&gpe_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Install block in the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc) {
/*
* No object, create a new one (Device nodes do not always have
* an attached object)
*/
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE);
if (!obj_desc) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
status =
acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE);
/* Remove local reference to the object */
acpi_ut_remove_reference(obj_desc);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
}
/* Now install the GPE block in the device_object */
obj_desc->device.gpe_block = gpe_block;
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_install_gpe_block)
/*******************************************************************************
*
* FUNCTION: acpi_remove_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
*
* RETURN: Status
*
* DESCRIPTION: Remove a previously installed block of GPE registers
*
******************************************************************************/
acpi_status acpi_remove_gpe_block(acpi_handle gpe_device)
{
union acpi_operand_object *obj_desc;
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(acpi_remove_gpe_block);
if (!gpe_device) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(gpe_device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Validate the parent device */
if (node->type != ACPI_TYPE_DEVICE) {
status = AE_TYPE;
goto unlock_and_exit;
}
/* Get the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc || !obj_desc->device.gpe_block) {
return_ACPI_STATUS(AE_NULL_OBJECT);
}
/* Delete the GPE block (but not the device_object) */
status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block);
if (ACPI_SUCCESS(status)) {
obj_desc->device.gpe_block = NULL;
}
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)
/*******************************************************************************
*
* FUNCTION: acpi_get_gpe_device
*
* PARAMETERS: index - System GPE index (0-current_gpe_count)
* gpe_device - Where the parent GPE Device is returned
*
* RETURN: Status
*
* DESCRIPTION: Obtain the GPE device associated with the input index. A NULL
* gpe device indicates that the gpe number is contained in one of
* the FADT-defined gpe blocks. Otherwise, the GPE block device.
*
******************************************************************************/
acpi_status acpi_get_gpe_device(u32 index, acpi_handle * gpe_device)
{
struct acpi_gpe_device_info info;
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_get_gpe_device);
if (!gpe_device) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (index >= acpi_current_gpe_count) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
/* Setup and walk the GPE list */
info.index = index;
info.status = AE_NOT_EXIST;
info.gpe_device = NULL;
info.next_block_base_index = 0;
status = acpi_ev_walk_gpe_list(acpi_ev_get_gpe_device, &info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
*gpe_device = ACPI_CAST_PTR(acpi_handle, info.gpe_device);
return_ACPI_STATUS(info.status);
}
ACPI_EXPORT_SYMBOL(acpi_get_gpe_device)
#endif /* !ACPI_REDUCED_HARDWARE */
View git blame Copy permalink