![Russell King](/assets/img/avatar_default.png)
Robert Jarzmik reports that his PXA25x system fails to boot with 4.12, failing at __flush_whole_cache in arch/arm/mm/proc-xscale.S:215: 0xc0019e20 <+0>: ldr r1, [pc, #788] 0xc0019e24 <+4>: ldr r0, [r1] <== here with r1 containing 0xc06f82cd, which is the address of "clean_addr". Examination of the System.map shows: c06f22c8 D user_pmd_table c06f22cc d __warned.19178 c06f22cd d clean_addr indicating that a .data.unlikely section has appeared just before the .data section from proc-xscale.S. According to objdump -h, it appears that our assembly files default their .data alignment to 2**0, which is bad news if the preceding .data section size is not power-of-2 aligned at link time. Add the appropriate .align directives to all assembly files in arch/arm that are missing them where we require an appropriate alignment. Reported-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
735 lines
19 KiB
ArmAsm
735 lines
19 KiB
ArmAsm
/*
|
|
* linux/arch/arm/kernel/head.S
|
|
*
|
|
* Copyright (C) 1994-2002 Russell King
|
|
* Copyright (c) 2003 ARM Limited
|
|
* All Rights Reserved
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Kernel startup code for all 32-bit CPUs
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/assembler.h>
|
|
#include <asm/cp15.h>
|
|
#include <asm/domain.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
|
|
#include CONFIG_DEBUG_LL_INCLUDE
|
|
#endif
|
|
|
|
/*
|
|
* swapper_pg_dir is the virtual address of the initial page table.
|
|
* We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
|
|
* make sure that KERNEL_RAM_VADDR is correctly set. Currently, we expect
|
|
* the least significant 16 bits to be 0x8000, but we could probably
|
|
* relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
|
|
*/
|
|
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
|
|
#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
|
|
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_LPAE
|
|
/* LPAE requires an additional page for the PGD */
|
|
#define PG_DIR_SIZE 0x5000
|
|
#define PMD_ORDER 3
|
|
#else
|
|
#define PG_DIR_SIZE 0x4000
|
|
#define PMD_ORDER 2
|
|
#endif
|
|
|
|
.globl swapper_pg_dir
|
|
.equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
|
|
|
|
.macro pgtbl, rd, phys
|
|
add \rd, \phys, #TEXT_OFFSET
|
|
sub \rd, \rd, #PG_DIR_SIZE
|
|
.endm
|
|
|
|
/*
|
|
* Kernel startup entry point.
|
|
* ---------------------------
|
|
*
|
|
* This is normally called from the decompressor code. The requirements
|
|
* are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
|
|
* r1 = machine nr, r2 = atags or dtb pointer.
|
|
*
|
|
* This code is mostly position independent, so if you link the kernel at
|
|
* 0xc0008000, you call this at __pa(0xc0008000).
|
|
*
|
|
* See linux/arch/arm/tools/mach-types for the complete list of machine
|
|
* numbers for r1.
|
|
*
|
|
* We're trying to keep crap to a minimum; DO NOT add any machine specific
|
|
* crap here - that's what the boot loader (or in extreme, well justified
|
|
* circumstances, zImage) is for.
|
|
*/
|
|
.arm
|
|
|
|
__HEAD
|
|
ENTRY(stext)
|
|
ARM_BE8(setend be ) @ ensure we are in BE8 mode
|
|
|
|
THUMB( badr r9, 1f ) @ Kernel is always entered in ARM.
|
|
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
|
|
THUMB( .thumb ) @ switch to Thumb now.
|
|
THUMB(1: )
|
|
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
bl __hyp_stub_install
|
|
#endif
|
|
@ ensure svc mode and all interrupts masked
|
|
safe_svcmode_maskall r9
|
|
|
|
mrc p15, 0, r9, c0, c0 @ get processor id
|
|
bl __lookup_processor_type @ r5=procinfo r9=cpuid
|
|
movs r10, r5 @ invalid processor (r5=0)?
|
|
THUMB( it eq ) @ force fixup-able long branch encoding
|
|
beq __error_p @ yes, error 'p'
|
|
|
|
#ifdef CONFIG_ARM_LPAE
|
|
mrc p15, 0, r3, c0, c1, 4 @ read ID_MMFR0
|
|
and r3, r3, #0xf @ extract VMSA support
|
|
cmp r3, #5 @ long-descriptor translation table format?
|
|
THUMB( it lo ) @ force fixup-able long branch encoding
|
|
blo __error_lpae @ only classic page table format
|
|
#endif
|
|
|
|
#ifndef CONFIG_XIP_KERNEL
|
|
adr r3, 2f
|
|
ldmia r3, {r4, r8}
|
|
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
|
|
add r8, r8, r4 @ PHYS_OFFSET
|
|
#else
|
|
ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case
|
|
#endif
|
|
|
|
/*
|
|
* r1 = machine no, r2 = atags or dtb,
|
|
* r8 = phys_offset, r9 = cpuid, r10 = procinfo
|
|
*/
|
|
bl __vet_atags
|
|
#ifdef CONFIG_SMP_ON_UP
|
|
bl __fixup_smp
|
|
#endif
|
|
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
|
|
bl __fixup_pv_table
|
|
#endif
|
|
bl __create_page_tables
|
|
|
|
/*
|
|
* The following calls CPU specific code in a position independent
|
|
* manner. See arch/arm/mm/proc-*.S for details. r10 = base of
|
|
* xxx_proc_info structure selected by __lookup_processor_type
|
|
* above.
|
|
*
|
|
* The processor init function will be called with:
|
|
* r1 - machine type
|
|
* r2 - boot data (atags/dt) pointer
|
|
* r4 - translation table base (low word)
|
|
* r5 - translation table base (high word, if LPAE)
|
|
* r8 - translation table base 1 (pfn if LPAE)
|
|
* r9 - cpuid
|
|
* r13 - virtual address for __enable_mmu -> __turn_mmu_on
|
|
*
|
|
* On return, the CPU will be ready for the MMU to be turned on,
|
|
* r0 will hold the CPU control register value, r1, r2, r4, and
|
|
* r9 will be preserved. r5 will also be preserved if LPAE.
|
|
*/
|
|
ldr r13, =__mmap_switched @ address to jump to after
|
|
@ mmu has been enabled
|
|
badr lr, 1f @ return (PIC) address
|
|
#ifdef CONFIG_ARM_LPAE
|
|
mov r5, #0 @ high TTBR0
|
|
mov r8, r4, lsr #12 @ TTBR1 is swapper_pg_dir pfn
|
|
#else
|
|
mov r8, r4 @ set TTBR1 to swapper_pg_dir
|
|
#endif
|
|
ldr r12, [r10, #PROCINFO_INITFUNC]
|
|
add r12, r12, r10
|
|
ret r12
|
|
1: b __enable_mmu
|
|
ENDPROC(stext)
|
|
.ltorg
|
|
#ifndef CONFIG_XIP_KERNEL
|
|
2: .long .
|
|
.long PAGE_OFFSET
|
|
#endif
|
|
|
|
/*
|
|
* Setup the initial page tables. We only setup the barest
|
|
* amount which are required to get the kernel running, which
|
|
* generally means mapping in the kernel code.
|
|
*
|
|
* r8 = phys_offset, r9 = cpuid, r10 = procinfo
|
|
*
|
|
* Returns:
|
|
* r0, r3, r5-r7 corrupted
|
|
* r4 = physical page table address
|
|
*/
|
|
__create_page_tables:
|
|
pgtbl r4, r8 @ page table address
|
|
|
|
/*
|
|
* Clear the swapper page table
|
|
*/
|
|
mov r0, r4
|
|
mov r3, #0
|
|
add r6, r0, #PG_DIR_SIZE
|
|
1: str r3, [r0], #4
|
|
str r3, [r0], #4
|
|
str r3, [r0], #4
|
|
str r3, [r0], #4
|
|
teq r0, r6
|
|
bne 1b
|
|
|
|
#ifdef CONFIG_ARM_LPAE
|
|
/*
|
|
* Build the PGD table (first level) to point to the PMD table. A PGD
|
|
* entry is 64-bit wide.
|
|
*/
|
|
mov r0, r4
|
|
add r3, r4, #0x1000 @ first PMD table address
|
|
orr r3, r3, #3 @ PGD block type
|
|
mov r6, #4 @ PTRS_PER_PGD
|
|
mov r7, #1 << (55 - 32) @ L_PGD_SWAPPER
|
|
1:
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
str r7, [r0], #4 @ set top PGD entry bits
|
|
str r3, [r0], #4 @ set bottom PGD entry bits
|
|
#else
|
|
str r3, [r0], #4 @ set bottom PGD entry bits
|
|
str r7, [r0], #4 @ set top PGD entry bits
|
|
#endif
|
|
add r3, r3, #0x1000 @ next PMD table
|
|
subs r6, r6, #1
|
|
bne 1b
|
|
|
|
add r4, r4, #0x1000 @ point to the PMD tables
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
add r4, r4, #4 @ we only write the bottom word
|
|
#endif
|
|
#endif
|
|
|
|
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
|
|
|
|
/*
|
|
* Create identity mapping to cater for __enable_mmu.
|
|
* This identity mapping will be removed by paging_init().
|
|
*/
|
|
adr r0, __turn_mmu_on_loc
|
|
ldmia r0, {r3, r5, r6}
|
|
sub r0, r0, r3 @ virt->phys offset
|
|
add r5, r5, r0 @ phys __turn_mmu_on
|
|
add r6, r6, r0 @ phys __turn_mmu_on_end
|
|
mov r5, r5, lsr #SECTION_SHIFT
|
|
mov r6, r6, lsr #SECTION_SHIFT
|
|
|
|
1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base
|
|
str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping
|
|
cmp r5, r6
|
|
addlo r5, r5, #1 @ next section
|
|
blo 1b
|
|
|
|
/*
|
|
* Map our RAM from the start to the end of the kernel .bss section.
|
|
*/
|
|
add r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
|
|
ldr r6, =(_end - 1)
|
|
orr r3, r8, r7
|
|
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
|
|
1: str r3, [r0], #1 << PMD_ORDER
|
|
add r3, r3, #1 << SECTION_SHIFT
|
|
cmp r0, r6
|
|
bls 1b
|
|
|
|
#ifdef CONFIG_XIP_KERNEL
|
|
/*
|
|
* Map the kernel image separately as it is not located in RAM.
|
|
*/
|
|
#define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
|
|
mov r3, pc
|
|
mov r3, r3, lsr #SECTION_SHIFT
|
|
orr r3, r7, r3, lsl #SECTION_SHIFT
|
|
add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
|
|
str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
|
|
ldr r6, =(_edata_loc - 1)
|
|
add r0, r0, #1 << PMD_ORDER
|
|
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
|
|
1: cmp r0, r6
|
|
add r3, r3, #1 << SECTION_SHIFT
|
|
strls r3, [r0], #1 << PMD_ORDER
|
|
bls 1b
|
|
#endif
|
|
|
|
/*
|
|
* Then map boot params address in r2 if specified.
|
|
* We map 2 sections in case the ATAGs/DTB crosses a section boundary.
|
|
*/
|
|
mov r0, r2, lsr #SECTION_SHIFT
|
|
movs r0, r0, lsl #SECTION_SHIFT
|
|
subne r3, r0, r8
|
|
addne r3, r3, #PAGE_OFFSET
|
|
addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
|
|
orrne r6, r7, r0
|
|
strne r6, [r3], #1 << PMD_ORDER
|
|
addne r6, r6, #1 << SECTION_SHIFT
|
|
strne r6, [r3]
|
|
|
|
#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
|
|
sub r4, r4, #4 @ Fixup page table pointer
|
|
@ for 64-bit descriptors
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEBUG_LL
|
|
#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING)
|
|
/*
|
|
* Map in IO space for serial debugging.
|
|
* This allows debug messages to be output
|
|
* via a serial console before paging_init.
|
|
*/
|
|
addruart r7, r3, r0
|
|
|
|
mov r3, r3, lsr #SECTION_SHIFT
|
|
mov r3, r3, lsl #PMD_ORDER
|
|
|
|
add r0, r4, r3
|
|
mov r3, r7, lsr #SECTION_SHIFT
|
|
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
|
|
orr r3, r7, r3, lsl #SECTION_SHIFT
|
|
#ifdef CONFIG_ARM_LPAE
|
|
mov r7, #1 << (54 - 32) @ XN
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
str r7, [r0], #4
|
|
str r3, [r0], #4
|
|
#else
|
|
str r3, [r0], #4
|
|
str r7, [r0], #4
|
|
#endif
|
|
#else
|
|
orr r3, r3, #PMD_SECT_XN
|
|
str r3, [r0], #4
|
|
#endif
|
|
|
|
#else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */
|
|
/* we don't need any serial debugging mappings */
|
|
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
|
|
/*
|
|
* If we're using the NetWinder or CATS, we also need to map
|
|
* in the 16550-type serial port for the debug messages
|
|
*/
|
|
add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
|
|
orr r3, r7, #0x7c000000
|
|
str r3, [r0]
|
|
#endif
|
|
#ifdef CONFIG_ARCH_RPC
|
|
/*
|
|
* Map in screen at 0x02000000 & SCREEN2_BASE
|
|
* Similar reasons here - for debug. This is
|
|
* only for Acorn RiscPC architectures.
|
|
*/
|
|
add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
|
|
orr r3, r7, #0x02000000
|
|
str r3, [r0]
|
|
add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
|
|
str r3, [r0]
|
|
#endif
|
|
#endif
|
|
#ifdef CONFIG_ARM_LPAE
|
|
sub r4, r4, #0x1000 @ point to the PGD table
|
|
#endif
|
|
ret lr
|
|
ENDPROC(__create_page_tables)
|
|
.ltorg
|
|
.align
|
|
__turn_mmu_on_loc:
|
|
.long .
|
|
.long __turn_mmu_on
|
|
.long __turn_mmu_on_end
|
|
|
|
#if defined(CONFIG_SMP)
|
|
.text
|
|
.arm
|
|
ENTRY(secondary_startup_arm)
|
|
THUMB( badr r9, 1f ) @ Kernel is entered in ARM.
|
|
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
|
|
THUMB( .thumb ) @ switch to Thumb now.
|
|
THUMB(1: )
|
|
ENTRY(secondary_startup)
|
|
/*
|
|
* Common entry point for secondary CPUs.
|
|
*
|
|
* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
|
|
* the processor type - there is no need to check the machine type
|
|
* as it has already been validated by the primary processor.
|
|
*/
|
|
|
|
ARM_BE8(setend be) @ ensure we are in BE8 mode
|
|
|
|
#ifdef CONFIG_ARM_VIRT_EXT
|
|
bl __hyp_stub_install_secondary
|
|
#endif
|
|
safe_svcmode_maskall r9
|
|
|
|
mrc p15, 0, r9, c0, c0 @ get processor id
|
|
bl __lookup_processor_type
|
|
movs r10, r5 @ invalid processor?
|
|
moveq r0, #'p' @ yes, error 'p'
|
|
THUMB( it eq ) @ force fixup-able long branch encoding
|
|
beq __error_p
|
|
|
|
/*
|
|
* Use the page tables supplied from __cpu_up.
|
|
*/
|
|
adr r4, __secondary_data
|
|
ldmia r4, {r5, r7, r12} @ address to jump to after
|
|
sub lr, r4, r5 @ mmu has been enabled
|
|
add r3, r7, lr
|
|
ldrd r4, [r3, #0] @ get secondary_data.pgdir
|
|
ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE:
|
|
ARM_BE8(eor r5, r4, r5) @ it can be done in 3 steps
|
|
ARM_BE8(eor r4, r4, r5) @ without using a temp reg.
|
|
ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir
|
|
badr lr, __enable_mmu @ return address
|
|
mov r13, r12 @ __secondary_switched address
|
|
ldr r12, [r10, #PROCINFO_INITFUNC]
|
|
add r12, r12, r10 @ initialise processor
|
|
@ (return control reg)
|
|
ret r12
|
|
ENDPROC(secondary_startup)
|
|
ENDPROC(secondary_startup_arm)
|
|
|
|
/*
|
|
* r6 = &secondary_data
|
|
*/
|
|
ENTRY(__secondary_switched)
|
|
ldr sp, [r7, #12] @ get secondary_data.stack
|
|
mov fp, #0
|
|
b secondary_start_kernel
|
|
ENDPROC(__secondary_switched)
|
|
|
|
.align
|
|
|
|
.type __secondary_data, %object
|
|
__secondary_data:
|
|
.long .
|
|
.long secondary_data
|
|
.long __secondary_switched
|
|
#endif /* defined(CONFIG_SMP) */
|
|
|
|
|
|
|
|
/*
|
|
* Setup common bits before finally enabling the MMU. Essentially
|
|
* this is just loading the page table pointer and domain access
|
|
* registers. All these registers need to be preserved by the
|
|
* processor setup function (or set in the case of r0)
|
|
*
|
|
* r0 = cp#15 control register
|
|
* r1 = machine ID
|
|
* r2 = atags or dtb pointer
|
|
* r4 = TTBR pointer (low word)
|
|
* r5 = TTBR pointer (high word if LPAE)
|
|
* r9 = processor ID
|
|
* r13 = *virtual* address to jump to upon completion
|
|
*/
|
|
__enable_mmu:
|
|
#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
|
|
orr r0, r0, #CR_A
|
|
#else
|
|
bic r0, r0, #CR_A
|
|
#endif
|
|
#ifdef CONFIG_CPU_DCACHE_DISABLE
|
|
bic r0, r0, #CR_C
|
|
#endif
|
|
#ifdef CONFIG_CPU_BPREDICT_DISABLE
|
|
bic r0, r0, #CR_Z
|
|
#endif
|
|
#ifdef CONFIG_CPU_ICACHE_DISABLE
|
|
bic r0, r0, #CR_I
|
|
#endif
|
|
#ifdef CONFIG_ARM_LPAE
|
|
mcrr p15, 0, r4, r5, c2 @ load TTBR0
|
|
#else
|
|
mov r5, #DACR_INIT
|
|
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
|
|
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
|
|
#endif
|
|
b __turn_mmu_on
|
|
ENDPROC(__enable_mmu)
|
|
|
|
/*
|
|
* Enable the MMU. This completely changes the structure of the visible
|
|
* memory space. You will not be able to trace execution through this.
|
|
* If you have an enquiry about this, *please* check the linux-arm-kernel
|
|
* mailing list archives BEFORE sending another post to the list.
|
|
*
|
|
* r0 = cp#15 control register
|
|
* r1 = machine ID
|
|
* r2 = atags or dtb pointer
|
|
* r9 = processor ID
|
|
* r13 = *virtual* address to jump to upon completion
|
|
*
|
|
* other registers depend on the function called upon completion
|
|
*/
|
|
.align 5
|
|
.pushsection .idmap.text, "ax"
|
|
ENTRY(__turn_mmu_on)
|
|
mov r0, r0
|
|
instr_sync
|
|
mcr p15, 0, r0, c1, c0, 0 @ write control reg
|
|
mrc p15, 0, r3, c0, c0, 0 @ read id reg
|
|
instr_sync
|
|
mov r3, r3
|
|
mov r3, r13
|
|
ret r3
|
|
__turn_mmu_on_end:
|
|
ENDPROC(__turn_mmu_on)
|
|
.popsection
|
|
|
|
|
|
#ifdef CONFIG_SMP_ON_UP
|
|
__HEAD
|
|
__fixup_smp:
|
|
and r3, r9, #0x000f0000 @ architecture version
|
|
teq r3, #0x000f0000 @ CPU ID supported?
|
|
bne __fixup_smp_on_up @ no, assume UP
|
|
|
|
bic r3, r9, #0x00ff0000
|
|
bic r3, r3, #0x0000000f @ mask 0xff00fff0
|
|
mov r4, #0x41000000
|
|
orr r4, r4, #0x0000b000
|
|
orr r4, r4, #0x00000020 @ val 0x4100b020
|
|
teq r3, r4 @ ARM 11MPCore?
|
|
reteq lr @ yes, assume SMP
|
|
|
|
mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
|
|
and r0, r0, #0xc0000000 @ multiprocessing extensions and
|
|
teq r0, #0x80000000 @ not part of a uniprocessor system?
|
|
bne __fixup_smp_on_up @ no, assume UP
|
|
|
|
@ Core indicates it is SMP. Check for Aegis SOC where a single
|
|
@ Cortex-A9 CPU is present but SMP operations fault.
|
|
mov r4, #0x41000000
|
|
orr r4, r4, #0x0000c000
|
|
orr r4, r4, #0x00000090
|
|
teq r3, r4 @ Check for ARM Cortex-A9
|
|
retne lr @ Not ARM Cortex-A9,
|
|
|
|
@ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the
|
|
@ below address check will need to be #ifdef'd or equivalent
|
|
@ for the Aegis platform.
|
|
mrc p15, 4, r0, c15, c0 @ get SCU base address
|
|
teq r0, #0x0 @ '0' on actual UP A9 hardware
|
|
beq __fixup_smp_on_up @ So its an A9 UP
|
|
ldr r0, [r0, #4] @ read SCU Config
|
|
ARM_BE8(rev r0, r0) @ byteswap if big endian
|
|
and r0, r0, #0x3 @ number of CPUs
|
|
teq r0, #0x0 @ is 1?
|
|
retne lr
|
|
|
|
__fixup_smp_on_up:
|
|
adr r0, 1f
|
|
ldmia r0, {r3 - r5}
|
|
sub r3, r0, r3
|
|
add r4, r4, r3
|
|
add r5, r5, r3
|
|
b __do_fixup_smp_on_up
|
|
ENDPROC(__fixup_smp)
|
|
|
|
.align
|
|
1: .word .
|
|
.word __smpalt_begin
|
|
.word __smpalt_end
|
|
|
|
.pushsection .data
|
|
.align 2
|
|
.globl smp_on_up
|
|
smp_on_up:
|
|
ALT_SMP(.long 1)
|
|
ALT_UP(.long 0)
|
|
.popsection
|
|
#endif
|
|
|
|
.text
|
|
__do_fixup_smp_on_up:
|
|
cmp r4, r5
|
|
reths lr
|
|
ldmia r4!, {r0, r6}
|
|
ARM( str r6, [r0, r3] )
|
|
THUMB( add r0, r0, r3 )
|
|
#ifdef __ARMEB__
|
|
THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
|
|
#endif
|
|
THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
|
|
THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3.
|
|
THUMB( strh r6, [r0] )
|
|
b __do_fixup_smp_on_up
|
|
ENDPROC(__do_fixup_smp_on_up)
|
|
|
|
ENTRY(fixup_smp)
|
|
stmfd sp!, {r4 - r6, lr}
|
|
mov r4, r0
|
|
add r5, r0, r1
|
|
mov r3, #0
|
|
bl __do_fixup_smp_on_up
|
|
ldmfd sp!, {r4 - r6, pc}
|
|
ENDPROC(fixup_smp)
|
|
|
|
#ifdef __ARMEB__
|
|
#define LOW_OFFSET 0x4
|
|
#define HIGH_OFFSET 0x0
|
|
#else
|
|
#define LOW_OFFSET 0x0
|
|
#define HIGH_OFFSET 0x4
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
|
|
|
|
/* __fixup_pv_table - patch the stub instructions with the delta between
|
|
* PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
|
|
* can be expressed by an immediate shifter operand. The stub instruction
|
|
* has a form of '(add|sub) rd, rn, #imm'.
|
|
*/
|
|
__HEAD
|
|
__fixup_pv_table:
|
|
adr r0, 1f
|
|
ldmia r0, {r3-r7}
|
|
mvn ip, #0
|
|
subs r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET
|
|
add r4, r4, r3 @ adjust table start address
|
|
add r5, r5, r3 @ adjust table end address
|
|
add r6, r6, r3 @ adjust __pv_phys_pfn_offset address
|
|
add r7, r7, r3 @ adjust __pv_offset address
|
|
mov r0, r8, lsr #PAGE_SHIFT @ convert to PFN
|
|
str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset
|
|
strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits
|
|
mov r6, r3, lsr #24 @ constant for add/sub instructions
|
|
teq r3, r6, lsl #24 @ must be 16MiB aligned
|
|
THUMB( it ne @ cross section branch )
|
|
bne __error
|
|
str r3, [r7, #LOW_OFFSET] @ save to __pv_offset low bits
|
|
b __fixup_a_pv_table
|
|
ENDPROC(__fixup_pv_table)
|
|
|
|
.align
|
|
1: .long .
|
|
.long __pv_table_begin
|
|
.long __pv_table_end
|
|
2: .long __pv_phys_pfn_offset
|
|
.long __pv_offset
|
|
|
|
.text
|
|
__fixup_a_pv_table:
|
|
adr r0, 3f
|
|
ldr r6, [r0]
|
|
add r6, r6, r3
|
|
ldr r0, [r6, #HIGH_OFFSET] @ pv_offset high word
|
|
ldr r6, [r6, #LOW_OFFSET] @ pv_offset low word
|
|
mov r6, r6, lsr #24
|
|
cmn r0, #1
|
|
#ifdef CONFIG_THUMB2_KERNEL
|
|
moveq r0, #0x200000 @ set bit 21, mov to mvn instruction
|
|
lsls r6, #24
|
|
beq 2f
|
|
clz r7, r6
|
|
lsr r6, #24
|
|
lsl r6, r7
|
|
bic r6, #0x0080
|
|
lsrs r7, #1
|
|
orrcs r6, #0x0080
|
|
orr r6, r6, r7, lsl #12
|
|
orr r6, #0x4000
|
|
b 2f
|
|
1: add r7, r3
|
|
ldrh ip, [r7, #2]
|
|
ARM_BE8(rev16 ip, ip)
|
|
tst ip, #0x4000
|
|
and ip, #0x8f00
|
|
orrne ip, r6 @ mask in offset bits 31-24
|
|
orreq ip, r0 @ mask in offset bits 7-0
|
|
ARM_BE8(rev16 ip, ip)
|
|
strh ip, [r7, #2]
|
|
bne 2f
|
|
ldrh ip, [r7]
|
|
ARM_BE8(rev16 ip, ip)
|
|
bic ip, #0x20
|
|
orr ip, ip, r0, lsr #16
|
|
ARM_BE8(rev16 ip, ip)
|
|
strh ip, [r7]
|
|
2: cmp r4, r5
|
|
ldrcc r7, [r4], #4 @ use branch for delay slot
|
|
bcc 1b
|
|
bx lr
|
|
#else
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
moveq r0, #0x00004000 @ set bit 22, mov to mvn instruction
|
|
#else
|
|
moveq r0, #0x400000 @ set bit 22, mov to mvn instruction
|
|
#endif
|
|
b 2f
|
|
1: ldr ip, [r7, r3]
|
|
#ifdef CONFIG_CPU_ENDIAN_BE8
|
|
@ in BE8, we load data in BE, but instructions still in LE
|
|
bic ip, ip, #0xff000000
|
|
tst ip, #0x000f0000 @ check the rotation field
|
|
orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24
|
|
biceq ip, ip, #0x00004000 @ clear bit 22
|
|
orreq ip, ip, r0 @ mask in offset bits 7-0
|
|
#else
|
|
bic ip, ip, #0x000000ff
|
|
tst ip, #0xf00 @ check the rotation field
|
|
orrne ip, ip, r6 @ mask in offset bits 31-24
|
|
biceq ip, ip, #0x400000 @ clear bit 22
|
|
orreq ip, ip, r0 @ mask in offset bits 7-0
|
|
#endif
|
|
str ip, [r7, r3]
|
|
2: cmp r4, r5
|
|
ldrcc r7, [r4], #4 @ use branch for delay slot
|
|
bcc 1b
|
|
ret lr
|
|
#endif
|
|
ENDPROC(__fixup_a_pv_table)
|
|
|
|
.align
|
|
3: .long __pv_offset
|
|
|
|
ENTRY(fixup_pv_table)
|
|
stmfd sp!, {r4 - r7, lr}
|
|
mov r3, #0 @ no offset
|
|
mov r4, r0 @ r0 = table start
|
|
add r5, r0, r1 @ r1 = table size
|
|
bl __fixup_a_pv_table
|
|
ldmfd sp!, {r4 - r7, pc}
|
|
ENDPROC(fixup_pv_table)
|
|
|
|
.data
|
|
.align 2
|
|
.globl __pv_phys_pfn_offset
|
|
.type __pv_phys_pfn_offset, %object
|
|
__pv_phys_pfn_offset:
|
|
.word 0
|
|
.size __pv_phys_pfn_offset, . -__pv_phys_pfn_offset
|
|
|
|
.globl __pv_offset
|
|
.type __pv_offset, %object
|
|
__pv_offset:
|
|
.quad 0
|
|
.size __pv_offset, . -__pv_offset
|
|
#endif
|
|
|
|
#include "head-common.S"
|