1
0
Fork 0
alistair23-linux/drivers/usb
Bin Liu cb83df77f3 usb: musb: cppi41: improve rx channel abort routine
1. set AUTOREQ to NONE at the beginning of teardown;

2. add delay for dma pipeline to drain;

3. Do not set USB_TDOWN bit for RX teardown.

  The CPPI hw has an issue that when tearing down a RX channel, if
  another RX channel is receiving data, the CPPI will lockup.

  To workaround the issue, do not set the CPPI TD bit. The steps before
  this point ensures the CPPI channel will be torn down properly.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-27 09:34:58 -06:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 usb: c67x00: drop owner assignment from platform_drivers 2014-10-20 16:21:46 +02:00
chipidea Revert "usb: chipidea: remove duplicate dev_set_drvdata for host_start" 2015-01-09 09:45:30 -08:00
class USB: cdc-acm: check for valid interfaces 2014-11-24 17:21:42 -08:00
common usb: move the OTG state from the USB PHY to the OTG structure 2014-11-03 10:01:25 -06:00
core More ACPI and power management updates for 3.19-rc1 2014-12-18 20:28:33 -08:00
dwc2 usb: dwc2: hcd: use HUB_CHAR_* 2015-01-19 12:56:22 -06:00
dwc3 Linux 3.19-rc5 2015-01-19 09:57:20 -06:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget usb: dummy_hcd: use HUB_CHAR_* 2015-01-19 12:56:38 -06:00
host OHCI: add a quirk for ULi M5237 blocking on reset 2015-01-09 12:40:37 -08:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mon
musb usb: musb: cppi41: improve rx channel abort routine 2015-01-27 09:34:58 -06:00
phy usb: phy: make GPIOs optional for the generic phy 2015-01-19 12:53:32 -06:00
renesas_usbhs usb: renesas_usbhs: add support for requesting DT DMA 2015-01-27 09:34:58 -06:00
serial usb: serial: handle -ENODEV quietly in generic_submit_read_urb 2015-01-12 10:23:54 +01:00
storage uas: Add US_FL_NO_ATA_1X for 2 more Seagate disk enclosures 2015-01-09 10:02:52 -08:00
usbip Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
wusbcore wusb: replace memset by memzero_explicit 2014-12-02 16:15:02 -08:00
Kconfig usb: Add LED triggers for USB activity 2014-09-25 17:05:12 +02:00
Makefile usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
README usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.