redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/input/tablet/wacom_serial4.c
Thomas Gleixner 83cde38357 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 55 
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version of 2 of the license or
  at your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 4 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.207758043@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:36:42 +02:00

618 lines
15 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Wacom protocol 4 serial tablet driver
*
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
* Copyright 2011-2012 Julian Squires <julian@cipht.net>
*
* Many thanks to Bill Seremetis, without whom PenPartner support
* would not have been possible. Thanks to Patrick Mahoney.
*
* This driver was developed with reference to much code written by others,
* particularly:
* - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>;
* - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>;
* - the USB wacom input driver, credited to many people
* (see drivers/input/tablet/wacom.h);
* - new and old versions of linuxwacom / xf86-input-wacom credited to
* Frederic Lepied, France. <Lepied@XFree86.org> and
* Ping Cheng, Wacom. <pingc@wacom.com>;
* - and xf86wacom.c (a presumably ancient version of the linuxwacom code),
* by Frederic Lepied and Raph Levien <raph@gtk.org>.
*
* To do:
* - support pad buttons; (requires access to a model with pad buttons)
* - support (protocol 4-style) tilt (requires access to a > 1.4 rom model)
*/
/*
* Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code,
* protocol 4 uses 7 or 9 byte of data in the following format:
*
* Byte 1
* bit 7 Sync bit always 1
* bit 6 Pointing device detected
* bit 5 Cursor = 0 / Stylus = 1
* bit 4 Reserved
* bit 3 1 if a button on the pointing device has been pressed
* bit 2 P0 (optional)
* bit 1 X15
* bit 0 X14
*
* Byte 2
* bit 7 Always 0
* bits 6-0 = X13 - X7
*
* Byte 3
* bit 7 Always 0
* bits 6-0 = X6 - X0
*
* Byte 4
* bit 7 Always 0
* bit 6 B3
* bit 5 B2
* bit 4 B1
* bit 3 B0
* bit 2 P1 (optional)
* bit 1 Y15
* bit 0 Y14
*
* Byte 5
* bit 7 Always 0
* bits 6-0 = Y13 - Y7
*
* Byte 6
* bit 7 Always 0
* bits 6-0 = Y6 - Y0
*
* Byte 7
* bit 7 Always 0
* bit 6 Sign of pressure data; or wheel-rel for cursor tool
* bit 5 P7; or REL1 for cursor tool
* bit 4 P6; or REL0 for cursor tool
* bit 3 P5
* bit 2 P4
* bit 1 P3
* bit 0 P2
*
* byte 8 and 9 are optional and present only
* in tilt mode.
*
* Byte 8
* bit 7 Always 0
* bit 6 Sign of tilt X
* bit 5 Xt6
* bit 4 Xt5
* bit 3 Xt4
* bit 2 Xt3
* bit 1 Xt2
* bit 0 Xt1
*
* Byte 9
* bit 7 Always 0
* bit 6 Sign of tilt Y
* bit 5 Yt6
* bit 4 Yt5
* bit 3 Yt4
* bit 2 Yt3
* bit 1 Yt2
* bit 0 Yt1
*/
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/serio.h>
#include <linux/slab.h>
#include <linux/string.h>
MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver");
MODULE_LICENSE("GPL");
#define REQUEST_MODEL_AND_ROM_VERSION "~#"
#define REQUEST_MAX_COORDINATES "~C\r"
#define REQUEST_CONFIGURATION_STRING "~R\r"
#define REQUEST_RESET_TO_PROTOCOL_IV "\r#"
/*
* Note: sending "\r$\r" causes at least the Digitizer II to send
* packets in ASCII instead of binary. "\r#" seems to undo that.
*/
#define COMMAND_START_SENDING_PACKETS "ST\r"
#define COMMAND_STOP_SENDING_PACKETS "SP\r"
#define COMMAND_MULTI_MODE_INPUT "MU1\r"
#define COMMAND_ORIGIN_IN_UPPER_LEFT "OC1\r"
#define COMMAND_ENABLE_ALL_MACRO_BUTTONS "~M0\r"
#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS "~M1\r"
#define COMMAND_TRANSMIT_AT_MAX_RATE "IT0\r"
#define COMMAND_DISABLE_INCREMENTAL_MODE "IN0\r"
#define COMMAND_ENABLE_CONTINUOUS_MODE "SR\r"
#define COMMAND_ENABLE_PRESSURE_MODE "PH1\r"
#define COMMAND_Z_FILTER "ZF1\r"
/* Note that this is a protocol 4 packet without tilt information. */
#define PACKET_LENGTH 7
#define DATA_SIZE 32
/* flags */
#define F_COVERS_SCREEN 0x01
#define F_HAS_STYLUS2 0x02
#define F_HAS_SCROLLWHEEL 0x04
/* device IDs */
#define STYLUS_DEVICE_ID 0x02
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
enum { STYLUS = 1, ERASER, CURSOR };
static const struct {
int device_id;
int input_id;
} tools[] = {
{ 0, 0 },
{ STYLUS_DEVICE_ID, BTN_TOOL_PEN },
{ ERASER_DEVICE_ID, BTN_TOOL_RUBBER },
{ CURSOR_DEVICE_ID, BTN_TOOL_MOUSE },
};
struct wacom {
struct input_dev *dev;
struct completion cmd_done;
int result;
u8 expect;
u8 eraser_mask;
unsigned int extra_z_bits;
unsigned int flags;
unsigned int res_x, res_y;
unsigned int max_x, max_y;
unsigned int tool;
unsigned int idx;
u8 data[DATA_SIZE];
char phys[32];
};
enum {
MODEL_CINTIQ = 0x504C, /* PL */
MODEL_CINTIQ2 = 0x4454, /* DT */
MODEL_DIGITIZER_II = 0x5544, /* UD */
MODEL_GRAPHIRE = 0x4554, /* ET */
MODEL_PENPARTNER = 0x4354, /* CT */
MODEL_ARTPAD_II = 0x4B54, /* KT */
};
static void wacom_handle_model_response(struct wacom *wacom)
{
int major_v, minor_v, r = 0;
char *p;
p = strrchr(wacom->data, 'V');
if (p)
r = sscanf(p + 1, "%u.%u", &major_v, &minor_v);
if (r != 2)
major_v = minor_v = 0;
switch (wacom->data[2] << 8 | wacom->data[3]) {
case MODEL_CINTIQ: /* UNTESTED */
case MODEL_CINTIQ2:
if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) {
wacom->dev->name = "Wacom Cintiq";
wacom->dev->id.version = MODEL_CINTIQ;
} else {
wacom->dev->name = "Wacom Cintiq II";
wacom->dev->id.version = MODEL_CINTIQ2;
}
wacom->res_x = 508;
wacom->res_y = 508;
switch (wacom->data[5] << 8 | wacom->data[6]) {
case 0x3731: /* PL-710 */
wacom->res_x = 2540;
wacom->res_y = 2540;
/* fall through */
case 0x3535: /* PL-550 */
case 0x3830: /* PL-800 */
wacom->extra_z_bits = 2;
}
wacom->flags = F_COVERS_SCREEN;
break;
case MODEL_PENPARTNER:
wacom->dev->name = "Wacom Penpartner";
wacom->dev->id.version = MODEL_PENPARTNER;
wacom->res_x = 1000;
wacom->res_y = 1000;
break;
case MODEL_GRAPHIRE:
wacom->dev->name = "Wacom Graphire";
wacom->dev->id.version = MODEL_GRAPHIRE;
wacom->res_x = 1016;
wacom->res_y = 1016;
wacom->max_x = 5103;
wacom->max_y = 3711;
wacom->extra_z_bits = 2;
wacom->eraser_mask = 0x08;
wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
break;
case MODEL_ARTPAD_II:
case MODEL_DIGITIZER_II:
wacom->dev->name = "Wacom Digitizer II";
wacom->dev->id.version = MODEL_DIGITIZER_II;
if (major_v == 1 && minor_v <= 2)
wacom->extra_z_bits = 0; /* UNTESTED */
break;
default:
dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n",
wacom->data);
wacom->result = -ENODEV;
return;
}
dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n",
wacom->dev->name, major_v, minor_v);
}
static void wacom_handle_configuration_response(struct wacom *wacom)
{
int r, skip;
dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data);
r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip,
&wacom->res_x, &wacom->res_y);
if (r != 5)
dev_warn(&wacom->dev->dev, "could not get resolution\n");
}
static void wacom_handle_coordinates_response(struct wacom *wacom)
{
int r;
dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data);
r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y);
if (r != 2)
dev_warn(&wacom->dev->dev, "could not get max coordinates\n");
}
static void wacom_handle_response(struct wacom *wacom)
{
if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) {
dev_err(&wacom->dev->dev,
"Wacom got an unexpected response: %s\n", wacom->data);
wacom->result = -EIO;
} else {
wacom->result = 0;
switch (wacom->data[1]) {
case '#':
wacom_handle_model_response(wacom);
break;
case 'R':
wacom_handle_configuration_response(wacom);
break;
case 'C':
wacom_handle_coordinates_response(wacom);
break;
}
}
complete(&wacom->cmd_done);
}
static void wacom_handle_packet(struct wacom *wacom)
{
u8 in_proximity_p, stylus_p, button;
unsigned int tool;
int x, y, z;
in_proximity_p = wacom->data[0] & 0x40;
stylus_p = wacom->data[0] & 0x20;
button = (wacom->data[3] & 0x78) >> 3;
x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2];
y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5];
if (in_proximity_p && stylus_p) {
z = wacom->data[6] & 0x7f;
if (wacom->extra_z_bits >= 1)
z = z << 1 | (wacom->data[3] & 0x4) >> 2;
if (wacom->extra_z_bits > 1)
z = z << 1 | (wacom->data[0] & 0x4) >> 2;
z = z ^ (0x40 << wacom->extra_z_bits);
} else {
z = -1;
}
if (stylus_p)
tool = (button & wacom->eraser_mask) ? ERASER : STYLUS;
else
tool = CURSOR;
if (tool != wacom->tool && wacom->tool != 0) {
input_report_key(wacom->dev, tools[wacom->tool].input_id, 0);
input_sync(wacom->dev);
}
wacom->tool = tool;
input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p);
input_report_abs(wacom->dev, ABS_MISC,
in_proximity_p ? tools[tool].device_id : 0);
input_report_abs(wacom->dev, ABS_X, x);
input_report_abs(wacom->dev, ABS_Y, y);
input_report_abs(wacom->dev, ABS_PRESSURE, z);
if (stylus_p) {
input_report_key(wacom->dev, BTN_TOUCH, button & 1);
input_report_key(wacom->dev, BTN_STYLUS, button & 2);
input_report_key(wacom->dev, BTN_STYLUS2, button & 4);
} else {
input_report_key(wacom->dev, BTN_LEFT, button & 1);
input_report_key(wacom->dev, BTN_RIGHT, button & 2);
input_report_key(wacom->dev, BTN_MIDDLE, button & 4);
/* handle relative wheel for non-stylus device */
z = (wacom->data[6] & 0x30) >> 4;
if (wacom->data[6] & 0x40)
z = -z;
input_report_rel(wacom->dev, REL_WHEEL, z);
}
input_sync(wacom->dev);
}
static void wacom_clear_data_buf(struct wacom *wacom)
{
memset(wacom->data, 0, DATA_SIZE);
wacom->idx = 0;
}
static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data,
unsigned int flags)
{
struct wacom *wacom = serio_get_drvdata(serio);
if (data & 0x80)
wacom->idx = 0;
/*
* We're either expecting a carriage return-terminated ASCII
* response string, or a seven-byte packet with the MSB set on
* the first byte.
*
* Note however that some tablets (the PenPartner, for
* example) don't send a carriage return at the end of a
* command. We handle these by waiting for timeout.
*/
if (data == '\r' && !(wacom->data[0] & 0x80)) {
wacom_handle_response(wacom);
wacom_clear_data_buf(wacom);
return IRQ_HANDLED;
}
/* Leave place for 0 termination */
if (wacom->idx > (DATA_SIZE - 2)) {
dev_dbg(&wacom->dev->dev,
"throwing away %d bytes of garbage\n", wacom->idx);
wacom_clear_data_buf(wacom);
}
wacom->data[wacom->idx++] = data;
if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) {
wacom_handle_packet(wacom);
wacom_clear_data_buf(wacom);
}
return IRQ_HANDLED;
}
static void wacom_disconnect(struct serio *serio)
{
struct wacom *wacom = serio_get_drvdata(serio);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_unregister_device(wacom->dev);
kfree(wacom);
}
static int wacom_send(struct serio *serio, const u8 *command)
{
int err = 0;
for (; !err && *command; command++)
err = serio_write(serio, *command);
return err;
}
static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio)
{
const u8 *cmd;
switch (wacom->dev->id.version) {
case MODEL_CINTIQ: /* UNTESTED */
cmd = COMMAND_ORIGIN_IN_UPPER_LEFT
COMMAND_TRANSMIT_AT_MAX_RATE
COMMAND_ENABLE_CONTINUOUS_MODE
COMMAND_START_SENDING_PACKETS;
break;
case MODEL_PENPARTNER:
cmd = COMMAND_ENABLE_PRESSURE_MODE
COMMAND_START_SENDING_PACKETS;
break;
default:
cmd = COMMAND_MULTI_MODE_INPUT
COMMAND_ORIGIN_IN_UPPER_LEFT
COMMAND_ENABLE_ALL_MACRO_BUTTONS
COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS
COMMAND_TRANSMIT_AT_MAX_RATE
COMMAND_DISABLE_INCREMENTAL_MODE
COMMAND_ENABLE_CONTINUOUS_MODE
COMMAND_Z_FILTER
COMMAND_START_SENDING_PACKETS;
break;
}
return wacom_send(serio, cmd);
}
static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio,
const u8 *cmd, const char *desc)
{
int err;
unsigned long u;
wacom->expect = cmd[1];
init_completion(&wacom->cmd_done);
err = wacom_send(serio, cmd);
if (err)
return err;
u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
if (u == 0) {
/* Timeout, process what we've received. */
wacom_handle_response(wacom);
}
wacom->expect = 0;
return wacom->result;
}
static int wacom_setup(struct wacom *wacom, struct serio *serio)
{
int err;
/* Note that setting the link speed is the job of inputattach.
* We assume that reset negotiation has already happened,
* here. */
err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION,
"model and version");
if (err)
return err;
if (!(wacom->res_x && wacom->res_y)) {
err = wacom_send_and_wait(wacom, serio,
REQUEST_CONFIGURATION_STRING,
"configuration string");
if (err)
return err;
}
if (!(wacom->max_x && wacom->max_y)) {
err = wacom_send_and_wait(wacom, serio,
REQUEST_MAX_COORDINATES,
"coordinates string");
if (err)
return err;
}
return wacom_send_setup_string(wacom, serio);
}
static int wacom_connect(struct serio *serio, struct serio_driver *drv)
{
struct wacom *wacom;
struct input_dev *input_dev;
int err = -ENOMEM;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
input_dev = input_allocate_device();
if (!wacom || !input_dev)
goto free_device;
wacom->dev = input_dev;
wacom->extra_z_bits = 1;
wacom->eraser_mask = 0x04;
wacom->tool = wacom->idx = 0;
snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys);
input_dev->phys = wacom->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_WACOM_IV;
input_dev->id.product = serio->id.extra;
input_dev->dev.parent = &serio->dev;
input_dev->evbit[0] =
BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL);
set_bit(ABS_MISC, input_dev->absbit);
set_bit(BTN_TOOL_PEN, input_dev->keybit);
set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
set_bit(BTN_TOUCH, input_dev->keybit);
set_bit(BTN_STYLUS, input_dev->keybit);
set_bit(BTN_LEFT, input_dev->keybit);
set_bit(BTN_RIGHT, input_dev->keybit);
set_bit(BTN_MIDDLE, input_dev->keybit);
serio_set_drvdata(serio, wacom);
err = serio_open(serio, drv);
if (err)
goto free_device;
err = wacom_setup(wacom, serio);
if (err)
goto close_serio;
set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
if (!(wacom->flags & F_COVERS_SCREEN))
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
if (wacom->flags & F_HAS_STYLUS2)
__set_bit(BTN_STYLUS2, input_dev->keybit);
if (wacom->flags & F_HAS_SCROLLWHEEL)
__set_bit(REL_WHEEL, input_dev->relbit);
input_abs_set_res(wacom->dev, ABS_X, wacom->res_x);
input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y);
input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0);
input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0);
input_set_abs_params(wacom->dev, ABS_PRESSURE, -1,
(1 << (7 + wacom->extra_z_bits)) - 1, 0, 0);
err = input_register_device(wacom->dev);
if (err)
goto close_serio;
return 0;
close_serio:
serio_close(serio);
free_device:
serio_set_drvdata(serio, NULL);
input_free_device(input_dev);
kfree(wacom);
return err;
}
static const struct serio_device_id wacom_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_WACOM_IV,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, wacom_serio_ids);
static struct serio_driver wacom_drv = {
.driver = {
.name = "wacom_serial4",
},
.description = "Wacom protocol 4 serial tablet driver",
.id_table = wacom_serio_ids,
.interrupt = wacom_interrupt,
.connect = wacom_connect,
.disconnect = wacom_disconnect,
};
module_serio_driver(wacom_drv);
View git blame Copy permalink