![Stephane Fillod](/assets/img/avatar_default.png)
Make smsc75xx recalculate the hard_mtu after adjusting the
hard_header_len.
Without this, usbnet adjusts the MTU down to 1492 bytes, and the host is
unable to receive standard 1500-byte frames from the device.
Inspired by same fix on cdc_eem 78fb72f793
.
Tested on ARM/Omap3 with EVB-LAN7500-LC.
Signed-off-by: Stephane Fillod <fillods@users.sf.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
1248 lines
34 KiB
C
1248 lines
34 KiB
C
/***************************************************************************
|
|
*
|
|
* Copyright (C) 2007-2010 SMSC
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/usb/usbnet.h>
|
|
#include <linux/slab.h>
|
|
#include "smsc75xx.h"
|
|
|
|
#define SMSC_CHIPNAME "smsc75xx"
|
|
#define SMSC_DRIVER_VERSION "1.0.0"
|
|
#define HS_USB_PKT_SIZE (512)
|
|
#define FS_USB_PKT_SIZE (64)
|
|
#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
|
|
#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
|
|
#define DEFAULT_BULK_IN_DELAY (0x00002000)
|
|
#define MAX_SINGLE_PACKET_SIZE (9000)
|
|
#define LAN75XX_EEPROM_MAGIC (0x7500)
|
|
#define EEPROM_MAC_OFFSET (0x01)
|
|
#define DEFAULT_TX_CSUM_ENABLE (true)
|
|
#define DEFAULT_RX_CSUM_ENABLE (true)
|
|
#define DEFAULT_TSO_ENABLE (true)
|
|
#define SMSC75XX_INTERNAL_PHY_ID (1)
|
|
#define SMSC75XX_TX_OVERHEAD (8)
|
|
#define MAX_RX_FIFO_SIZE (20 * 1024)
|
|
#define MAX_TX_FIFO_SIZE (12 * 1024)
|
|
#define USB_VENDOR_ID_SMSC (0x0424)
|
|
#define USB_PRODUCT_ID_LAN7500 (0x7500)
|
|
#define USB_PRODUCT_ID_LAN7505 (0x7505)
|
|
#define RXW_PADDING 2
|
|
|
|
#define check_warn(ret, fmt, args...) \
|
|
({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
|
|
|
|
#define check_warn_return(ret, fmt, args...) \
|
|
({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } })
|
|
|
|
#define check_warn_goto_done(ret, fmt, args...) \
|
|
({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } })
|
|
|
|
struct smsc75xx_priv {
|
|
struct usbnet *dev;
|
|
u32 rfe_ctl;
|
|
u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
|
|
struct mutex dataport_mutex;
|
|
spinlock_t rfe_ctl_lock;
|
|
struct work_struct set_multicast;
|
|
};
|
|
|
|
struct usb_context {
|
|
struct usb_ctrlrequest req;
|
|
struct usbnet *dev;
|
|
};
|
|
|
|
static bool turbo_mode = true;
|
|
module_param(turbo_mode, bool, 0644);
|
|
MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
|
|
|
|
static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
|
|
u32 *data)
|
|
{
|
|
u32 *buf = kmalloc(4, GFP_KERNEL);
|
|
int ret;
|
|
|
|
BUG_ON(!dev);
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
|
|
USB_VENDOR_REQUEST_READ_REGISTER,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
|
|
|
|
if (unlikely(ret < 0))
|
|
netdev_warn(dev->net,
|
|
"Failed to read register index 0x%08x", index);
|
|
|
|
le32_to_cpus(buf);
|
|
*data = *buf;
|
|
kfree(buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
|
|
u32 data)
|
|
{
|
|
u32 *buf = kmalloc(4, GFP_KERNEL);
|
|
int ret;
|
|
|
|
BUG_ON(!dev);
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
*buf = data;
|
|
cpu_to_le32s(buf);
|
|
|
|
ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
|
|
USB_VENDOR_REQUEST_WRITE_REGISTER,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
|
|
|
|
if (unlikely(ret < 0))
|
|
netdev_warn(dev->net,
|
|
"Failed to write register index 0x%08x", index);
|
|
|
|
kfree(buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Loop until the read is completed with timeout
|
|
* called with phy_mutex held */
|
|
static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
|
|
{
|
|
unsigned long start_time = jiffies;
|
|
u32 val;
|
|
int ret;
|
|
|
|
do {
|
|
ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
|
|
check_warn_return(ret, "Error reading MII_ACCESS");
|
|
|
|
if (!(val & MII_ACCESS_BUSY))
|
|
return 0;
|
|
} while (!time_after(jiffies, start_time + HZ));
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
u32 val, addr;
|
|
int ret;
|
|
|
|
mutex_lock(&dev->phy_mutex);
|
|
|
|
/* confirm MII not busy */
|
|
ret = smsc75xx_phy_wait_not_busy(dev);
|
|
check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read");
|
|
|
|
/* set the address, index & direction (read from PHY) */
|
|
phy_id &= dev->mii.phy_id_mask;
|
|
idx &= dev->mii.reg_num_mask;
|
|
addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
|
|
| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
|
|
| MII_ACCESS_READ;
|
|
ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
|
|
check_warn_goto_done(ret, "Error writing MII_ACCESS");
|
|
|
|
ret = smsc75xx_phy_wait_not_busy(dev);
|
|
check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
|
|
|
|
ret = smsc75xx_read_reg(dev, MII_DATA, &val);
|
|
check_warn_goto_done(ret, "Error reading MII_DATA");
|
|
|
|
ret = (u16)(val & 0xFFFF);
|
|
|
|
done:
|
|
mutex_unlock(&dev->phy_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
|
|
int regval)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
u32 val, addr;
|
|
int ret;
|
|
|
|
mutex_lock(&dev->phy_mutex);
|
|
|
|
/* confirm MII not busy */
|
|
ret = smsc75xx_phy_wait_not_busy(dev);
|
|
check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write");
|
|
|
|
val = regval;
|
|
ret = smsc75xx_write_reg(dev, MII_DATA, val);
|
|
check_warn_goto_done(ret, "Error writing MII_DATA");
|
|
|
|
/* set the address, index & direction (write to PHY) */
|
|
phy_id &= dev->mii.phy_id_mask;
|
|
idx &= dev->mii.reg_num_mask;
|
|
addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
|
|
| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
|
|
| MII_ACCESS_WRITE;
|
|
ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
|
|
check_warn_goto_done(ret, "Error writing MII_ACCESS");
|
|
|
|
ret = smsc75xx_phy_wait_not_busy(dev);
|
|
check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
|
|
|
|
done:
|
|
mutex_unlock(&dev->phy_mutex);
|
|
}
|
|
|
|
static int smsc75xx_wait_eeprom(struct usbnet *dev)
|
|
{
|
|
unsigned long start_time = jiffies;
|
|
u32 val;
|
|
int ret;
|
|
|
|
do {
|
|
ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
|
|
check_warn_return(ret, "Error reading E2P_CMD");
|
|
|
|
if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
|
|
break;
|
|
udelay(40);
|
|
} while (!time_after(jiffies, start_time + HZ));
|
|
|
|
if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
|
|
netdev_warn(dev->net, "EEPROM read operation timeout");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
|
|
{
|
|
unsigned long start_time = jiffies;
|
|
u32 val;
|
|
int ret;
|
|
|
|
do {
|
|
ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
|
|
check_warn_return(ret, "Error reading E2P_CMD");
|
|
|
|
if (!(val & E2P_CMD_BUSY))
|
|
return 0;
|
|
|
|
udelay(40);
|
|
} while (!time_after(jiffies, start_time + HZ));
|
|
|
|
netdev_warn(dev->net, "EEPROM is busy");
|
|
return -EIO;
|
|
}
|
|
|
|
static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
|
|
u8 *data)
|
|
{
|
|
u32 val;
|
|
int i, ret;
|
|
|
|
BUG_ON(!dev);
|
|
BUG_ON(!data);
|
|
|
|
ret = smsc75xx_eeprom_confirm_not_busy(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
|
|
ret = smsc75xx_write_reg(dev, E2P_CMD, val);
|
|
check_warn_return(ret, "Error writing E2P_CMD");
|
|
|
|
ret = smsc75xx_wait_eeprom(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
|
|
check_warn_return(ret, "Error reading E2P_DATA");
|
|
|
|
data[i] = val & 0xFF;
|
|
offset++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
|
|
u8 *data)
|
|
{
|
|
u32 val;
|
|
int i, ret;
|
|
|
|
BUG_ON(!dev);
|
|
BUG_ON(!data);
|
|
|
|
ret = smsc75xx_eeprom_confirm_not_busy(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Issue write/erase enable command */
|
|
val = E2P_CMD_BUSY | E2P_CMD_EWEN;
|
|
ret = smsc75xx_write_reg(dev, E2P_CMD, val);
|
|
check_warn_return(ret, "Error writing E2P_CMD");
|
|
|
|
ret = smsc75xx_wait_eeprom(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
|
|
/* Fill data register */
|
|
val = data[i];
|
|
ret = smsc75xx_write_reg(dev, E2P_DATA, val);
|
|
check_warn_return(ret, "Error writing E2P_DATA");
|
|
|
|
/* Send "write" command */
|
|
val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
|
|
ret = smsc75xx_write_reg(dev, E2P_CMD, val);
|
|
check_warn_return(ret, "Error writing E2P_CMD");
|
|
|
|
ret = smsc75xx_wait_eeprom(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
offset++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
u32 dp_sel;
|
|
ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
|
|
check_warn_return(ret, "Error reading DP_SEL");
|
|
|
|
if (dp_sel & DP_SEL_DPRDY)
|
|
return 0;
|
|
|
|
udelay(40);
|
|
}
|
|
|
|
netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out");
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
|
|
u32 length, u32 *buf)
|
|
{
|
|
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
|
|
u32 dp_sel;
|
|
int i, ret;
|
|
|
|
mutex_lock(&pdata->dataport_mutex);
|
|
|
|
ret = smsc75xx_dataport_wait_not_busy(dev);
|
|
check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry");
|
|
|
|
ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
|
|
check_warn_goto_done(ret, "Error reading DP_SEL");
|
|
|
|
dp_sel &= ~DP_SEL_RSEL;
|
|
dp_sel |= ram_select;
|
|
ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
|
|
check_warn_goto_done(ret, "Error writing DP_SEL");
|
|
|
|
for (i = 0; i < length; i++) {
|
|
ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
|
|
check_warn_goto_done(ret, "Error writing DP_ADDR");
|
|
|
|
ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
|
|
check_warn_goto_done(ret, "Error writing DP_DATA");
|
|
|
|
ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
|
|
check_warn_goto_done(ret, "Error writing DP_CMD");
|
|
|
|
ret = smsc75xx_dataport_wait_not_busy(dev);
|
|
check_warn_goto_done(ret, "smsc75xx_dataport_write timeout");
|
|
}
|
|
|
|
done:
|
|
mutex_unlock(&pdata->dataport_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/* returns hash bit number for given MAC address */
|
|
static u32 smsc75xx_hash(char addr[ETH_ALEN])
|
|
{
|
|
return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
|
|
}
|
|
|
|
static void smsc75xx_deferred_multicast_write(struct work_struct *param)
|
|
{
|
|
struct smsc75xx_priv *pdata =
|
|
container_of(param, struct smsc75xx_priv, set_multicast);
|
|
struct usbnet *dev = pdata->dev;
|
|
int ret;
|
|
|
|
netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x",
|
|
pdata->rfe_ctl);
|
|
|
|
smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
|
|
DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
|
|
|
|
ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
|
|
check_warn(ret, "Error writing RFE_CRL");
|
|
}
|
|
|
|
static void smsc75xx_set_multicast(struct net_device *netdev)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
|
|
|
|
pdata->rfe_ctl &=
|
|
~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
|
|
pdata->rfe_ctl |= RFE_CTL_AB;
|
|
|
|
for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
|
|
pdata->multicast_hash_table[i] = 0;
|
|
|
|
if (dev->net->flags & IFF_PROMISC) {
|
|
netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
|
|
pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
|
|
} else if (dev->net->flags & IFF_ALLMULTI) {
|
|
netif_dbg(dev, drv, dev->net, "receive all multicast enabled");
|
|
pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
|
|
} else if (!netdev_mc_empty(dev->net)) {
|
|
struct netdev_hw_addr *ha;
|
|
|
|
netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
|
|
|
|
pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
|
|
|
|
netdev_for_each_mc_addr(ha, netdev) {
|
|
u32 bitnum = smsc75xx_hash(ha->addr);
|
|
pdata->multicast_hash_table[bitnum / 32] |=
|
|
(1 << (bitnum % 32));
|
|
}
|
|
} else {
|
|
netif_dbg(dev, drv, dev->net, "receive own packets only");
|
|
pdata->rfe_ctl |= RFE_CTL_DPF;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
|
|
|
|
/* defer register writes to a sleepable context */
|
|
schedule_work(&pdata->set_multicast);
|
|
}
|
|
|
|
static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
|
|
u16 lcladv, u16 rmtadv)
|
|
{
|
|
u32 flow = 0, fct_flow = 0;
|
|
int ret;
|
|
|
|
if (duplex == DUPLEX_FULL) {
|
|
u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
|
|
|
|
if (cap & FLOW_CTRL_TX) {
|
|
flow = (FLOW_TX_FCEN | 0xFFFF);
|
|
/* set fct_flow thresholds to 20% and 80% */
|
|
fct_flow = (8 << 8) | 32;
|
|
}
|
|
|
|
if (cap & FLOW_CTRL_RX)
|
|
flow |= FLOW_RX_FCEN;
|
|
|
|
netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
|
|
(cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
|
|
(cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
|
|
} else {
|
|
netif_dbg(dev, link, dev->net, "half duplex");
|
|
}
|
|
|
|
ret = smsc75xx_write_reg(dev, FLOW, flow);
|
|
check_warn_return(ret, "Error writing FLOW");
|
|
|
|
ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
|
|
check_warn_return(ret, "Error writing FCT_FLOW");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc75xx_link_reset(struct usbnet *dev)
|
|
{
|
|
struct mii_if_info *mii = &dev->mii;
|
|
struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
|
|
u16 lcladv, rmtadv;
|
|
int ret;
|
|
|
|
/* clear interrupt status */
|
|
ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
|
|
check_warn_return(ret, "Error reading PHY_INT_SRC");
|
|
|
|
ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
|
|
check_warn_return(ret, "Error writing INT_STS");
|
|
|
|
mii_check_media(mii, 1, 1);
|
|
mii_ethtool_gset(&dev->mii, &ecmd);
|
|
lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
|
|
rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
|
|
|
|
netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x"
|
|
" rmtadv: %04x", ethtool_cmd_speed(&ecmd),
|
|
ecmd.duplex, lcladv, rmtadv);
|
|
|
|
return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
|
|
}
|
|
|
|
static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
|
|
{
|
|
u32 intdata;
|
|
|
|
if (urb->actual_length != 4) {
|
|
netdev_warn(dev->net,
|
|
"unexpected urb length %d", urb->actual_length);
|
|
return;
|
|
}
|
|
|
|
memcpy(&intdata, urb->transfer_buffer, 4);
|
|
le32_to_cpus(&intdata);
|
|
|
|
netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata);
|
|
|
|
if (intdata & INT_ENP_PHY_INT)
|
|
usbnet_defer_kevent(dev, EVENT_LINK_RESET);
|
|
else
|
|
netdev_warn(dev->net,
|
|
"unexpected interrupt, intdata=0x%08X", intdata);
|
|
}
|
|
|
|
static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
|
|
{
|
|
return MAX_EEPROM_SIZE;
|
|
}
|
|
|
|
static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
|
|
struct ethtool_eeprom *ee, u8 *data)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
|
|
ee->magic = LAN75XX_EEPROM_MAGIC;
|
|
|
|
return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
|
|
}
|
|
|
|
static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
|
|
struct ethtool_eeprom *ee, u8 *data)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
|
|
if (ee->magic != LAN75XX_EEPROM_MAGIC) {
|
|
netdev_warn(dev->net,
|
|
"EEPROM: magic value mismatch: 0x%x", ee->magic);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
|
|
}
|
|
|
|
static const struct ethtool_ops smsc75xx_ethtool_ops = {
|
|
.get_link = usbnet_get_link,
|
|
.nway_reset = usbnet_nway_reset,
|
|
.get_drvinfo = usbnet_get_drvinfo,
|
|
.get_msglevel = usbnet_get_msglevel,
|
|
.set_msglevel = usbnet_set_msglevel,
|
|
.get_settings = usbnet_get_settings,
|
|
.set_settings = usbnet_set_settings,
|
|
.get_eeprom_len = smsc75xx_ethtool_get_eeprom_len,
|
|
.get_eeprom = smsc75xx_ethtool_get_eeprom,
|
|
.set_eeprom = smsc75xx_ethtool_set_eeprom,
|
|
};
|
|
|
|
static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
|
|
if (!netif_running(netdev))
|
|
return -EINVAL;
|
|
|
|
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
|
|
}
|
|
|
|
static void smsc75xx_init_mac_address(struct usbnet *dev)
|
|
{
|
|
/* try reading mac address from EEPROM */
|
|
if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
|
|
dev->net->dev_addr) == 0) {
|
|
if (is_valid_ether_addr(dev->net->dev_addr)) {
|
|
/* eeprom values are valid so use them */
|
|
netif_dbg(dev, ifup, dev->net,
|
|
"MAC address read from EEPROM");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* no eeprom, or eeprom values are invalid. generate random MAC */
|
|
eth_hw_addr_random(dev->net);
|
|
netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
|
|
}
|
|
|
|
static int smsc75xx_set_mac_address(struct usbnet *dev)
|
|
{
|
|
u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
|
|
dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
|
|
u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
|
|
|
|
int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
|
|
check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret);
|
|
|
|
ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
|
|
check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret);
|
|
|
|
addr_hi |= ADDR_FILTX_FB_VALID;
|
|
ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
|
|
check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret);
|
|
|
|
ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
|
|
check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc75xx_phy_initialize(struct usbnet *dev)
|
|
{
|
|
int bmcr, timeout = 0;
|
|
|
|
/* Initialize MII structure */
|
|
dev->mii.dev = dev->net;
|
|
dev->mii.mdio_read = smsc75xx_mdio_read;
|
|
dev->mii.mdio_write = smsc75xx_mdio_write;
|
|
dev->mii.phy_id_mask = 0x1f;
|
|
dev->mii.reg_num_mask = 0x1f;
|
|
dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
|
|
|
|
/* reset phy and wait for reset to complete */
|
|
smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
|
|
|
|
do {
|
|
msleep(10);
|
|
bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
|
|
check_warn_return(bmcr, "Error reading MII_BMCR");
|
|
timeout++;
|
|
} while ((bmcr & MII_BMCR) && (timeout < 100));
|
|
|
|
if (timeout >= 100) {
|
|
netdev_warn(dev->net, "timeout on PHY Reset");
|
|
return -EIO;
|
|
}
|
|
|
|
smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
|
|
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
|
|
ADVERTISE_PAUSE_ASYM);
|
|
|
|
/* read to clear */
|
|
smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
|
|
check_warn_return(bmcr, "Error reading PHY_INT_SRC");
|
|
|
|
smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
|
|
PHY_INT_MASK_DEFAULT);
|
|
mii_nway_restart(&dev->mii);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
|
|
return 0;
|
|
}
|
|
|
|
static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
|
|
{
|
|
int ret = 0;
|
|
u32 buf;
|
|
bool rxenabled;
|
|
|
|
ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
|
|
check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
|
|
|
|
rxenabled = ((buf & MAC_RX_RXEN) != 0);
|
|
|
|
if (rxenabled) {
|
|
buf &= ~MAC_RX_RXEN;
|
|
ret = smsc75xx_write_reg(dev, MAC_RX, buf);
|
|
check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
|
|
}
|
|
|
|
/* add 4 to size for FCS */
|
|
buf &= ~MAC_RX_MAX_SIZE;
|
|
buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
|
|
|
|
ret = smsc75xx_write_reg(dev, MAC_RX, buf);
|
|
check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
|
|
|
|
if (rxenabled) {
|
|
buf |= MAC_RX_RXEN;
|
|
ret = smsc75xx_write_reg(dev, MAC_RX, buf);
|
|
check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
|
|
int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
|
|
check_warn_return(ret, "Failed to set mac rx frame length");
|
|
|
|
return usbnet_change_mtu(netdev, new_mtu);
|
|
}
|
|
|
|
/* Enable or disable Rx checksum offload engine */
|
|
static int smsc75xx_set_features(struct net_device *netdev,
|
|
netdev_features_t features)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
|
|
|
|
if (features & NETIF_F_RXCSUM)
|
|
pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
|
|
else
|
|
pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
|
|
|
|
spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
|
|
/* it's racing here! */
|
|
|
|
ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
|
|
check_warn_return(ret, "Error writing RFE_CTL");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc75xx_reset(struct usbnet *dev)
|
|
{
|
|
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
|
|
u32 buf;
|
|
int ret = 0, timeout;
|
|
|
|
netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset");
|
|
|
|
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
|
|
check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
|
|
|
|
buf |= HW_CFG_LRST;
|
|
|
|
ret = smsc75xx_write_reg(dev, HW_CFG, buf);
|
|
check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
|
|
|
|
timeout = 0;
|
|
do {
|
|
msleep(10);
|
|
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
|
|
check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
|
|
timeout++;
|
|
} while ((buf & HW_CFG_LRST) && (timeout < 100));
|
|
|
|
if (timeout >= 100) {
|
|
netdev_warn(dev->net, "timeout on completion of Lite Reset");
|
|
return -EIO;
|
|
}
|
|
|
|
netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY");
|
|
|
|
ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
|
|
check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
|
|
|
|
buf |= PMT_CTL_PHY_RST;
|
|
|
|
ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
|
|
check_warn_return(ret, "Failed to write PMT_CTL: %d", ret);
|
|
|
|
timeout = 0;
|
|
do {
|
|
msleep(10);
|
|
ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
|
|
check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
|
|
timeout++;
|
|
} while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
|
|
|
|
if (timeout >= 100) {
|
|
netdev_warn(dev->net, "timeout waiting for PHY Reset");
|
|
return -EIO;
|
|
}
|
|
|
|
netif_dbg(dev, ifup, dev->net, "PHY reset complete");
|
|
|
|
smsc75xx_init_mac_address(dev);
|
|
|
|
ret = smsc75xx_set_mac_address(dev);
|
|
check_warn_return(ret, "Failed to set mac address");
|
|
|
|
netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr);
|
|
|
|
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
|
|
check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf);
|
|
|
|
buf |= HW_CFG_BIR;
|
|
|
|
ret = smsc75xx_write_reg(dev, HW_CFG, buf);
|
|
check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
|
|
|
|
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
|
|
check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after "
|
|
"writing HW_CFG_BIR: 0x%08x", buf);
|
|
|
|
if (!turbo_mode) {
|
|
buf = 0;
|
|
dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
|
|
} else if (dev->udev->speed == USB_SPEED_HIGH) {
|
|
buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
|
|
dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
|
|
} else {
|
|
buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
|
|
dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
|
|
}
|
|
|
|
netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld",
|
|
(ulong)dev->rx_urb_size);
|
|
|
|
ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
|
|
check_warn_return(ret, "Failed to write BURST_CAP: %d", ret);
|
|
|
|
ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
|
|
check_warn_return(ret, "Failed to read BURST_CAP: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net,
|
|
"Read Value from BURST_CAP after writing: 0x%08x", buf);
|
|
|
|
ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
|
|
check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret);
|
|
|
|
ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
|
|
check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net,
|
|
"Read Value from BULK_IN_DLY after writing: 0x%08x", buf);
|
|
|
|
if (turbo_mode) {
|
|
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
|
|
check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
|
|
|
|
buf |= (HW_CFG_MEF | HW_CFG_BCE);
|
|
|
|
ret = smsc75xx_write_reg(dev, HW_CFG, buf);
|
|
check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
|
|
|
|
ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
|
|
check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
|
|
}
|
|
|
|
/* set FIFO sizes */
|
|
buf = (MAX_RX_FIFO_SIZE - 512) / 512;
|
|
ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
|
|
check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf);
|
|
|
|
buf = (MAX_TX_FIFO_SIZE - 512) / 512;
|
|
ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
|
|
check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf);
|
|
|
|
ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
|
|
check_warn_return(ret, "Failed to write INT_STS: %d", ret);
|
|
|
|
ret = smsc75xx_read_reg(dev, ID_REV, &buf);
|
|
check_warn_return(ret, "Failed to read ID_REV: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
|
|
|
|
/* Configure GPIO pins as LED outputs */
|
|
ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
|
|
check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
|
|
|
|
buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
|
|
buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
|
|
|
|
ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
|
|
check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
|
|
|
|
ret = smsc75xx_write_reg(dev, FLOW, 0);
|
|
check_warn_return(ret, "Failed to write FLOW: %d", ret);
|
|
|
|
ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
|
|
check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret);
|
|
|
|
/* Don't need rfe_ctl_lock during initialisation */
|
|
ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
|
|
check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
|
|
|
|
pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
|
|
|
|
ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
|
|
check_warn_return(ret, "Failed to write RFE_CTL: %d", ret);
|
|
|
|
ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
|
|
check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
|
|
|
|
/* Enable or disable checksum offload engines */
|
|
smsc75xx_set_features(dev->net, dev->net->features);
|
|
|
|
smsc75xx_set_multicast(dev->net);
|
|
|
|
ret = smsc75xx_phy_initialize(dev);
|
|
check_warn_return(ret, "Failed to initialize PHY: %d", ret);
|
|
|
|
ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
|
|
check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret);
|
|
|
|
/* enable PHY interrupts */
|
|
buf |= INT_ENP_PHY_INT;
|
|
|
|
ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
|
|
check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
|
|
|
|
ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
|
|
check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
|
|
|
|
buf |= MAC_TX_TXEN;
|
|
|
|
ret = smsc75xx_write_reg(dev, MAC_TX, buf);
|
|
check_warn_return(ret, "Failed to write MAC_TX: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf);
|
|
|
|
ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
|
|
check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret);
|
|
|
|
buf |= FCT_TX_CTL_EN;
|
|
|
|
ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
|
|
check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
|
|
|
|
ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
|
|
check_warn_return(ret, "Failed to set max rx frame length");
|
|
|
|
ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
|
|
check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
|
|
|
|
buf |= MAC_RX_RXEN;
|
|
|
|
ret = smsc75xx_write_reg(dev, MAC_RX, buf);
|
|
check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf);
|
|
|
|
ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
|
|
check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret);
|
|
|
|
buf |= FCT_RX_CTL_EN;
|
|
|
|
ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
|
|
check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf);
|
|
|
|
netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0");
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops smsc75xx_netdev_ops = {
|
|
.ndo_open = usbnet_open,
|
|
.ndo_stop = usbnet_stop,
|
|
.ndo_start_xmit = usbnet_start_xmit,
|
|
.ndo_tx_timeout = usbnet_tx_timeout,
|
|
.ndo_change_mtu = smsc75xx_change_mtu,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = smsc75xx_ioctl,
|
|
.ndo_set_rx_mode = smsc75xx_set_multicast,
|
|
.ndo_set_features = smsc75xx_set_features,
|
|
};
|
|
|
|
static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
struct smsc75xx_priv *pdata = NULL;
|
|
int ret;
|
|
|
|
printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
|
|
|
|
ret = usbnet_get_endpoints(dev, intf);
|
|
check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret);
|
|
|
|
dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
|
|
GFP_KERNEL);
|
|
|
|
pdata = (struct smsc75xx_priv *)(dev->data[0]);
|
|
if (!pdata) {
|
|
netdev_warn(dev->net, "Unable to allocate smsc75xx_priv");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pdata->dev = dev;
|
|
|
|
spin_lock_init(&pdata->rfe_ctl_lock);
|
|
mutex_init(&pdata->dataport_mutex);
|
|
|
|
INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
|
|
|
|
if (DEFAULT_TX_CSUM_ENABLE) {
|
|
dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
|
|
if (DEFAULT_TSO_ENABLE)
|
|
dev->net->features |= NETIF_F_SG |
|
|
NETIF_F_TSO | NETIF_F_TSO6;
|
|
}
|
|
if (DEFAULT_RX_CSUM_ENABLE)
|
|
dev->net->features |= NETIF_F_RXCSUM;
|
|
|
|
dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
|
|
NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXCSUM;
|
|
|
|
/* Init all registers */
|
|
ret = smsc75xx_reset(dev);
|
|
|
|
dev->net->netdev_ops = &smsc75xx_netdev_ops;
|
|
dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
|
|
dev->net->flags |= IFF_MULTICAST;
|
|
dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
|
|
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
|
|
return 0;
|
|
}
|
|
|
|
static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
|
|
if (pdata) {
|
|
netif_dbg(dev, ifdown, dev->net, "free pdata");
|
|
kfree(pdata);
|
|
pdata = NULL;
|
|
dev->data[0] = 0;
|
|
}
|
|
}
|
|
|
|
static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
|
|
u32 rx_cmd_a, u32 rx_cmd_b)
|
|
{
|
|
if (!(dev->net->features & NETIF_F_RXCSUM) ||
|
|
unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
} else {
|
|
skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
|
}
|
|
}
|
|
|
|
static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
|
|
{
|
|
while (skb->len > 0) {
|
|
u32 rx_cmd_a, rx_cmd_b, align_count, size;
|
|
struct sk_buff *ax_skb;
|
|
unsigned char *packet;
|
|
|
|
memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
|
|
le32_to_cpus(&rx_cmd_a);
|
|
skb_pull(skb, 4);
|
|
|
|
memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
|
|
le32_to_cpus(&rx_cmd_b);
|
|
skb_pull(skb, 4 + RXW_PADDING);
|
|
|
|
packet = skb->data;
|
|
|
|
/* get the packet length */
|
|
size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
|
|
align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
|
|
|
|
if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
|
|
netif_dbg(dev, rx_err, dev->net,
|
|
"Error rx_cmd_a=0x%08x", rx_cmd_a);
|
|
dev->net->stats.rx_errors++;
|
|
dev->net->stats.rx_dropped++;
|
|
|
|
if (rx_cmd_a & RX_CMD_A_FCS)
|
|
dev->net->stats.rx_crc_errors++;
|
|
else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
|
|
dev->net->stats.rx_frame_errors++;
|
|
} else {
|
|
/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
|
|
if (unlikely(size > (ETH_FRAME_LEN + 12))) {
|
|
netif_dbg(dev, rx_err, dev->net,
|
|
"size err rx_cmd_a=0x%08x", rx_cmd_a);
|
|
return 0;
|
|
}
|
|
|
|
/* last frame in this batch */
|
|
if (skb->len == size) {
|
|
smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
|
|
rx_cmd_b);
|
|
|
|
skb_trim(skb, skb->len - 4); /* remove fcs */
|
|
skb->truesize = size + sizeof(struct sk_buff);
|
|
|
|
return 1;
|
|
}
|
|
|
|
ax_skb = skb_clone(skb, GFP_ATOMIC);
|
|
if (unlikely(!ax_skb)) {
|
|
netdev_warn(dev->net, "Error allocating skb");
|
|
return 0;
|
|
}
|
|
|
|
ax_skb->len = size;
|
|
ax_skb->data = packet;
|
|
skb_set_tail_pointer(ax_skb, size);
|
|
|
|
smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
|
|
rx_cmd_b);
|
|
|
|
skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
|
|
ax_skb->truesize = size + sizeof(struct sk_buff);
|
|
|
|
usbnet_skb_return(dev, ax_skb);
|
|
}
|
|
|
|
skb_pull(skb, size);
|
|
|
|
/* padding bytes before the next frame starts */
|
|
if (skb->len)
|
|
skb_pull(skb, align_count);
|
|
}
|
|
|
|
if (unlikely(skb->len < 0)) {
|
|
netdev_warn(dev->net, "invalid rx length<0 %d", skb->len);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
|
|
struct sk_buff *skb, gfp_t flags)
|
|
{
|
|
u32 tx_cmd_a, tx_cmd_b;
|
|
|
|
skb_linearize(skb);
|
|
|
|
if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
|
|
struct sk_buff *skb2 =
|
|
skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
|
|
dev_kfree_skb_any(skb);
|
|
skb = skb2;
|
|
if (!skb)
|
|
return NULL;
|
|
}
|
|
|
|
tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
|
|
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL)
|
|
tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
|
|
|
|
if (skb_is_gso(skb)) {
|
|
u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
|
|
tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
|
|
|
|
tx_cmd_a |= TX_CMD_A_LSO;
|
|
} else {
|
|
tx_cmd_b = 0;
|
|
}
|
|
|
|
skb_push(skb, 4);
|
|
cpu_to_le32s(&tx_cmd_b);
|
|
memcpy(skb->data, &tx_cmd_b, 4);
|
|
|
|
skb_push(skb, 4);
|
|
cpu_to_le32s(&tx_cmd_a);
|
|
memcpy(skb->data, &tx_cmd_a, 4);
|
|
|
|
return skb;
|
|
}
|
|
|
|
static const struct driver_info smsc75xx_info = {
|
|
.description = "smsc75xx USB 2.0 Gigabit Ethernet",
|
|
.bind = smsc75xx_bind,
|
|
.unbind = smsc75xx_unbind,
|
|
.link_reset = smsc75xx_link_reset,
|
|
.reset = smsc75xx_reset,
|
|
.rx_fixup = smsc75xx_rx_fixup,
|
|
.tx_fixup = smsc75xx_tx_fixup,
|
|
.status = smsc75xx_status,
|
|
.flags = FLAG_ETHER | FLAG_SEND_ZLP,
|
|
};
|
|
|
|
static const struct usb_device_id products[] = {
|
|
{
|
|
/* SMSC7500 USB Gigabit Ethernet Device */
|
|
USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
|
|
.driver_info = (unsigned long) &smsc75xx_info,
|
|
},
|
|
{
|
|
/* SMSC7500 USB Gigabit Ethernet Device */
|
|
USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
|
|
.driver_info = (unsigned long) &smsc75xx_info,
|
|
},
|
|
{ }, /* END */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, products);
|
|
|
|
static struct usb_driver smsc75xx_driver = {
|
|
.name = SMSC_CHIPNAME,
|
|
.id_table = products,
|
|
.probe = usbnet_probe,
|
|
.suspend = usbnet_suspend,
|
|
.resume = usbnet_resume,
|
|
.disconnect = usbnet_disconnect,
|
|
};
|
|
|
|
module_usb_driver(smsc75xx_driver);
|
|
|
|
MODULE_AUTHOR("Nancy Lin");
|
|
MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
|
|
MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
|
|
MODULE_LICENSE("GPL");
|