f54005b508
After converting the PXA driver to use GPIO descriptors for card detect and write protect it is relatively simple to convert it to also use a descriptor for getting the optional power control GPIO. The polarity inversion flag can also go away from the platform data since this is indicated in the GPIO machine descriptor table. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
295 lines
6.8 KiB
C
295 lines
6.8 KiB
C
/*
|
|
* Support for Cogent CSB726
|
|
*
|
|
* Copyright (c) 2008 Dmitry Eremin-Solenikov
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/sm501.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/platform_data/i2c-pxa.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include "csb726.h"
|
|
#include "pxa27x.h"
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/usb-ohci-pxa27x.h>
|
|
#include <mach/audio.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
/*
|
|
* n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
|
|
* nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
|
|
* XXX: 21,
|
|
* XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
|
|
* XXX: 33 CS_5 for LAN9215 on R1
|
|
*/
|
|
|
|
static unsigned long csb726_pin_config[] = {
|
|
GPIO78_nCS_2, /* EXP_CS */
|
|
GPIO79_nCS_3, /* SMSC9215 */
|
|
GPIO80_nCS_4, /* SM501 */
|
|
|
|
GPIO52_GPIO, /* #SMSC9251 int */
|
|
GPIO53_GPIO, /* SM501 int */
|
|
|
|
GPIO1_GPIO, /* GPIO0 */
|
|
GPIO11_GPIO, /* GPIO1 */
|
|
GPIO9_GPIO, /* GPIO2 */
|
|
GPIO10_GPIO, /* GPIO3 */
|
|
GPIO16_PWM0_OUT, /* or GPIO4 */
|
|
GPIO17_PWM1_OUT, /* or GPIO5 */
|
|
GPIO94_GPIO, /* GPIO6 */
|
|
GPIO95_GPIO, /* GPIO7 */
|
|
GPIO96_GPIO, /* GPIO8 */
|
|
GPIO97_GPIO, /* GPIO9 */
|
|
GPIO15_GPIO, /* EXP_IRQ */
|
|
GPIO18_RDY, /* EXP_WAIT */
|
|
|
|
GPIO0_GPIO, /* PWR_INT */
|
|
GPIO104_GPIO, /* PWR_OFF */
|
|
|
|
GPIO12_GPIO, /* touch irq */
|
|
|
|
GPIO13_SSP2_TXD,
|
|
GPIO14_SSP2_SFRM,
|
|
MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
|
|
GPIO22_SSP2_SCLK,
|
|
|
|
GPIO81_SSP3_TXD,
|
|
GPIO82_SSP3_RXD,
|
|
GPIO83_SSP3_SFRM,
|
|
GPIO84_SSP3_SCLK,
|
|
|
|
GPIO20_GPIO, /* SDIO int */
|
|
GPIO32_MMC_CLK,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
GPIO112_MMC_CMD,
|
|
GPIO100_GPIO, /* SD CD */
|
|
GPIO101_GPIO, /* SD WP */
|
|
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO113_AC97_nRESET,
|
|
|
|
GPIO34_FFUART_RXD,
|
|
GPIO35_FFUART_CTS,
|
|
GPIO36_FFUART_DCD,
|
|
GPIO37_FFUART_DSR,
|
|
GPIO38_FFUART_RI,
|
|
GPIO39_FFUART_TXD,
|
|
GPIO40_FFUART_DTR,
|
|
GPIO41_FFUART_RTS,
|
|
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO54_nPCE_2,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16, /* maybe unused */
|
|
GPIO85_nPCE_1,
|
|
GPIO98_GPIO, /* CF IRQ */
|
|
GPIO99_GPIO, /* CF CD */
|
|
GPIO103_GPIO, /* Reset */
|
|
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
};
|
|
|
|
static struct pxamci_platform_data csb726_mci = {
|
|
.detect_delay_ms = 500,
|
|
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
|
|
/* FIXME setpower */
|
|
};
|
|
|
|
static struct gpiod_lookup_table csb726_mci_gpio_table = {
|
|
.dev_id = "pxa2xx-mci.0",
|
|
.table = {
|
|
/* Card detect on GPIO 100 */
|
|
GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_DETECT,
|
|
"cd", GPIO_ACTIVE_LOW),
|
|
/* Write protect on GPIO 101 */
|
|
GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_RO,
|
|
"wp", GPIO_ACTIVE_LOW),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct pxaohci_platform_data csb726_ohci_platform_data = {
|
|
.port_mode = PMM_NPS_MODE,
|
|
.flags = ENABLE_PORT1 | NO_OC_PROTECTION,
|
|
};
|
|
|
|
static struct mtd_partition csb726_flash_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.offset = 0,
|
|
.size = CSB726_FLASH_uMON,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
},
|
|
{
|
|
.name = "root",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data csb726_flash_data = {
|
|
.width = 2,
|
|
.parts = csb726_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(csb726_flash_partitions),
|
|
};
|
|
|
|
static struct resource csb726_flash_resources[] = {
|
|
{
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device csb726_flash = {
|
|
.name = "physmap-flash",
|
|
.dev = {
|
|
.platform_data = &csb726_flash_data,
|
|
},
|
|
.resource = csb726_flash_resources,
|
|
.num_resources = ARRAY_SIZE(csb726_flash_resources),
|
|
};
|
|
|
|
static struct resource csb726_sm501_resources[] = {
|
|
{
|
|
.start = PXA_CS4_PHYS,
|
|
.end = PXA_CS4_PHYS + SZ_8M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
.name = "sm501-localmem",
|
|
},
|
|
{
|
|
.start = PXA_CS4_PHYS + SZ_64M - SZ_2M,
|
|
.end = PXA_CS4_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
.name = "sm501-regs",
|
|
},
|
|
{
|
|
.start = CSB726_IRQ_SM501,
|
|
.end = CSB726_IRQ_SM501,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct sm501_initdata csb726_sm501_initdata = {
|
|
/* .devices = SM501_USE_USB_HOST, */
|
|
.devices = SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
|
|
};
|
|
|
|
static struct sm501_platdata csb726_sm501_platdata = {
|
|
.init = &csb726_sm501_initdata,
|
|
};
|
|
|
|
static struct platform_device csb726_sm501 = {
|
|
.name = "sm501",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(csb726_sm501_resources),
|
|
.resource = csb726_sm501_resources,
|
|
.dev = {
|
|
.platform_data = &csb726_sm501_platdata,
|
|
},
|
|
};
|
|
|
|
static struct resource csb726_lan_resources[] = {
|
|
{
|
|
.start = PXA_CS3_PHYS,
|
|
.end = PXA_CS3_PHYS + SZ_64K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = CSB726_IRQ_LAN,
|
|
.end = CSB726_IRQ_LAN,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
|
},
|
|
};
|
|
|
|
struct smsc911x_platform_config csb726_lan_config = {
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
};
|
|
|
|
|
|
static struct platform_device csb726_lan = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(csb726_lan_resources),
|
|
.resource = csb726_lan_resources,
|
|
.dev = {
|
|
.platform_data = &csb726_lan_config,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&csb726_flash,
|
|
&csb726_sm501,
|
|
&csb726_lan,
|
|
};
|
|
|
|
static void __init csb726_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
|
|
/* __raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
|
|
/* __raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
|
|
__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
pxa_set_i2c_info(NULL);
|
|
pxa27x_set_i2c_power_info(NULL);
|
|
gpiod_add_lookup_table(&csb726_mci_gpio_table);
|
|
pxa_set_mci_info(&csb726_mci);
|
|
pxa_set_ohci_info(&csb726_ohci_platform_data);
|
|
pxa_set_ac97_info(NULL);
|
|
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
}
|
|
|
|
MACHINE_START(CSB726, "Cogent CSB726")
|
|
.atag_offset = 0x100,
|
|
.map_io = pxa27x_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa27x_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_machine = csb726_init,
|
|
.init_time = pxa_timer_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|