redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/mach-pxa/palmtreo.c
Linus Walleij f54005b508 mmc: pxa: Use GPIO descriptor for power 
After converting the PXA driver to use GPIO descriptors for
card detect and write protect it is relatively simple to
convert it to also use a descriptor for getting the optional
power control GPIO.

The polarity inversion flag can also go away from the platform
data since this is indicated in the GPIO machine descriptor
table.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17 08:26:24 +01:00

553 lines
14 KiB
C
Raw Blame History

/*
* Hardware definitions for Palm Treo smartphones
*
* currently supported:
* Palm Treo 680 (GSM)
* Palm Centro 685 (GSM)
*
* Author: Tomas Cech <sleep_walker@suse.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* (find more info at www.hackndev.com)
*
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/memblock.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/power_supply.h>
#include <linux/w1-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "pxa27x.h"
#include "pxa27x-udc.h"
#include <mach/audio.h>
#include "palmtreo.h"
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include "udc.h"
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/pxa2xx-regs.h>
#include <linux/platform_data/asoc-palm27x.h>
#include <linux/platform_data/media/camera-pxa.h>
#include "palm27x.h"
#include <sound/pxa2xx-lib.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static unsigned long treo_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO113_GPIO, /* SD detect */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
/* PWM */
GPIO16_PWM0_OUT,
/* USB */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
/* MATRIX KEYPAD */
GPIO101_KP_MKIN_1,
GPIO102_KP_MKIN_2,
GPIO97_KP_MKIN_3,
GPIO98_KP_MKIN_4,
GPIO91_KP_MKIN_6,
GPIO13_KP_MKIN_7,
GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
/* Quick Capture Interface */
GPIO84_CIF_FV,
GPIO85_CIF_LV,
GPIO53_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO81_CIF_DD_0,
GPIO55_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO50_CIF_DD_3,
GPIO52_CIF_DD_4,
GPIO48_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO12_CIF_DD_7,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* GSM */
GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */
GPIO34_FFUART_RXD,
GPIO35_FFUART_CTS,
GPIO39_FFUART_TXD,
GPIO41_FFUART_RTS,
/* MISC. */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */
GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */
GPIO116_GPIO, /* headphone detect */
GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
};
#ifdef CONFIG_MACH_TREO680
static unsigned long treo680_pin_config[] __initdata = {
GPIO33_GPIO, /* SD read only */
/* MATRIX KEYPAD - different wake up source */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO99_KP_MKIN_5,
/* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */
GPIOxx_LCD_16BPP,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
};
#endif /* CONFIG_MACH_TREO680 */
#ifdef CONFIG_MACH_CENTRO
static unsigned long centro685_pin_config[] __initdata = {
/* Bluetooth attached to BT UART*/
MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW), /* power: LOW = off */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* MATRIX KEYPAD - different wake up source */
GPIO100_KP_MKIN_0,
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
/* LCD */
GPIOxx_LCD_TFT_16BPP,
};
#endif /* CONFIG_MACH_CENTRO */
/******************************************************************************
* GPIO keyboard
******************************************************************************/
#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x)
static const unsigned int treo680_matrix_keys[] = {
KEY(0, 0, KEY_F8), /* Red/Off/Power */
KEY(0, 1, KEY_LEFT),
KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
KEY(0, 3, KEY_L),
KEY(0, 4, KEY_A),
KEY(0, 5, KEY_Q),
KEY(0, 6, KEY_P),
KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
KEY(1, 1, KEY_RIGHT),
KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
KEY(1, 3, KEY_Z),
KEY(1, 4, KEY_S),
KEY(1, 5, KEY_W),
KEY(2, 0, KEY_F1), /* Phone */
KEY(2, 1, KEY_UP),
KEY(2, 2, KEY_0),
KEY(2, 3, KEY_X),
KEY(2, 4, KEY_D),
KEY(2, 5, KEY_E),
KEY(3, 0, KEY_F10), /* Calendar */
KEY(3, 1, KEY_DOWN),
KEY(3, 2, KEY_SPACE),
KEY(3, 3, KEY_C),
KEY(3, 4, KEY_F),
KEY(3, 5, KEY_R),
KEY(4, 0, KEY_F12), /* Mail */
KEY(4, 1, KEY_KPENTER),
KEY(4, 2, KEY_RIGHTALT), /* Alt */
KEY(4, 3, KEY_V),
KEY(4, 4, KEY_G),
KEY(4, 5, KEY_T),
KEY(5, 0, KEY_F9), /* Home */
KEY(5, 1, KEY_PAGEUP), /* Side up */
KEY(5, 2, KEY_DOT),
KEY(5, 3, KEY_B),
KEY(5, 4, KEY_H),
KEY(5, 5, KEY_Y),
KEY(6, 0, KEY_TAB), /* Side Activate */
KEY(6, 1, KEY_PAGEDOWN), /* Side down */
KEY(6, 2, KEY_ENTER),
KEY(6, 3, KEY_N),
KEY(6, 4, KEY_J),
KEY(6, 5, KEY_U),
KEY(7, 0, KEY_F6), /* Green/Call */
KEY(7, 1, KEY_O),
KEY(7, 2, KEY_BACKSPACE),
KEY(7, 3, KEY_M),
KEY(7, 4, KEY_K),
KEY(7, 5, KEY_I),
};
static const unsigned int centro_matrix_keys[] = {
KEY(0, 0, KEY_F9), /* Home */
KEY(0, 1, KEY_LEFT),
KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
KEY(0, 3, KEY_L),
KEY(0, 4, KEY_A),
KEY(0, 5, KEY_Q),
KEY(0, 6, KEY_P),
KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
KEY(1, 1, KEY_RIGHT),
KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
KEY(1, 3, KEY_Z),
KEY(1, 4, KEY_S),
KEY(1, 5, KEY_W),
KEY(2, 0, KEY_F1), /* Phone */
KEY(2, 1, KEY_UP),
KEY(2, 2, KEY_0),
KEY(2, 3, KEY_X),
KEY(2, 4, KEY_D),
KEY(2, 5, KEY_E),
KEY(3, 0, KEY_F10), /* Calendar */
KEY(3, 1, KEY_DOWN),
KEY(3, 2, KEY_SPACE),
KEY(3, 3, KEY_C),
KEY(3, 4, KEY_F),
KEY(3, 5, KEY_R),
KEY(4, 0, KEY_F12), /* Mail */
KEY(4, 1, KEY_KPENTER),
KEY(4, 2, KEY_RIGHTALT), /* Alt */
KEY(4, 3, KEY_V),
KEY(4, 4, KEY_G),
KEY(4, 5, KEY_T),
KEY(5, 0, KEY_F8), /* Red/Off/Power */
KEY(5, 1, KEY_PAGEUP), /* Side up */
KEY(5, 2, KEY_DOT),
KEY(5, 3, KEY_B),
KEY(5, 4, KEY_H),
KEY(5, 5, KEY_Y),
KEY(6, 0, KEY_TAB), /* Side Activate */
KEY(6, 1, KEY_PAGEDOWN), /* Side down */
KEY(6, 2, KEY_ENTER),
KEY(6, 3, KEY_N),
KEY(6, 4, KEY_J),
KEY(6, 5, KEY_U),
KEY(7, 0, KEY_F6), /* Green/Call */
KEY(7, 1, KEY_O),
KEY(7, 2, KEY_BACKSPACE),
KEY(7, 3, KEY_M),
KEY(7, 4, KEY_K),
KEY(7, 5, KEY_I),
};
static struct matrix_keymap_data treo680_matrix_keymap_data = {
.keymap = treo680_matrix_keys,
.keymap_size = ARRAY_SIZE(treo680_matrix_keys),
};
static struct matrix_keymap_data centro_matrix_keymap_data = {
.keymap = centro_matrix_keys,
.keymap_size = ARRAY_SIZE(centro_matrix_keys),
};
static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
.matrix_key_rows = 8,
.matrix_key_cols = 7,
.matrix_keymap_data = &treo680_matrix_keymap_data,
.direct_key_map = { KEY_CONNECT },
.direct_key_num = 1,
.debounce_interval = 30,
};
static void __init palmtreo_kpc_init(void)
{
static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
if (machine_is_centro())
data->matrix_keymap_data = &centro_matrix_keymap_data;
pxa_set_keypad_info(&treo680_keypad_pdata);
}
#else
static inline void palmtreo_kpc_init(void) {}
#endif
/******************************************************************************
* USB host
******************************************************************************/
#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
static struct pxaohci_platform_data treo680_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT3,
.power_budget = 0,
};
static void __init palmtreo_uhc_init(void)
{
if (machine_is_treo680())
pxa_set_ohci_info(&treo680_ohci_info);
}
#else
static inline void palmtreo_uhc_init(void) {}
#endif
/******************************************************************************
* Vibra and LEDs
******************************************************************************/
static struct gpio_led treo680_gpio_leds[] = {
{
.name = "treo680:vibra:vibra",
.default_trigger = "none",
.gpio = GPIO_NR_TREO680_VIBRATE_EN,
},
{
.name = "treo680:green:led",
.default_trigger = "mmc0",
.gpio = GPIO_NR_TREO_GREEN_LED,
},
{
.name = "treo680:white:keybbl",
.default_trigger = "none",
.gpio = GPIO_NR_TREO680_KEYB_BL,
},
};
static struct gpio_led_platform_data treo680_gpio_led_info = {
.leds = treo680_gpio_leds,
.num_leds = ARRAY_SIZE(treo680_gpio_leds),
};
static struct gpio_led centro_gpio_leds[] = {
{
.name = "centro:vibra:vibra",
.default_trigger = "none",
.gpio = GPIO_NR_CENTRO_VIBRATE_EN,
},
{
.name = "centro:green:led",
.default_trigger = "mmc0",
.gpio = GPIO_NR_TREO_GREEN_LED,
},
{
.name = "centro:white:keybbl",
.default_trigger = "none",
.active_low = 1,
.gpio = GPIO_NR_CENTRO_KEYB_BL,
},
};
static struct gpio_led_platform_data centro_gpio_led_info = {
.leds = centro_gpio_leds,
.num_leds = ARRAY_SIZE(centro_gpio_leds),
};
static struct platform_device palmtreo_leds = {
.name = "leds-gpio",
.id = -1,
};
static void __init palmtreo_leds_init(void)
{
if (machine_is_centro())
palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
else if (machine_is_treo680())
palmtreo_leds.dev.platform_data = &treo680_gpio_led_info;
platform_device_register(&palmtreo_leds);
}
/******************************************************************************
* Machine init
******************************************************************************/
static void __init treo_reserve(void)
{
memblock_reserve(0xa0000000, 0x1000);
memblock_reserve(0xa2000000, 0x1000);
}
static void __init palmphone_common_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
palm27x_pm_init(TREO_STR_BASE);
palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
palm27x_irda_init(GPIO_NR_TREO_IR_EN);
palm27x_ac97_init(-1, -1, -1, 95);
palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
palm27x_pmic_init();
palmtreo_kpc_init();
palmtreo_uhc_init();
palmtreo_leds_init();
}
#ifdef CONFIG_MACH_TREO680
void __init treo680_gpio_init(void)
{
unsigned int gpio;
/* drive all three lcd gpios high initially */
const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT;
/*
* LCD GPIO initialization...
*/
/*
* This is likely the power to the lcd. Toggling it low/high appears to
* turn the lcd off/on. Can be toggled after lcd is initialized without
* any apparent adverse effects to the lcd operation. Note that this
* gpio line is used by the lcd controller as the L_BIAS signal, but
* treo680 configures it as gpio.
*/
gpio = GPIO_NR_TREO680_LCD_POWER;
if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0)
goto fail;
/*
* These two are called "enables", for lack of a better understanding.
* If either of these are toggled after the lcd is initialized, the
* image becomes degraded. N.B. The IPL shipped with the treo
* configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high. If
* the IPL is ever reprogrammed, this initialization may be need to be
* revisited.
*/
gpio = GPIO_NR_TREO680_LCD_EN;
if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0)
goto fail;
gpio = GPIO_NR_TREO680_LCD_EN_N;
if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0)
goto fail;
/* driving this low turns LCD on */
gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0);
return;
fail:
pr_err("gpio %d initialization failed\n", gpio);
gpio_free(GPIO_NR_TREO680_LCD_POWER);
gpio_free(GPIO_NR_TREO680_LCD_EN);
gpio_free(GPIO_NR_TREO680_LCD_EN_N);
}
static struct gpiod_lookup_table treo680_mci_gpio_table = {
.dev_id = "pxa2xx-mci.0",
.table = {
GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
"cd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_READONLY,
"wp", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_POWER,
"power", GPIO_ACTIVE_HIGH),
{ },
},
};
static void __init treo680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
palmphone_common_init();
treo680_gpio_init();
palm27x_mmc_init(&treo680_mci_gpio_table);
}
#endif
#ifdef CONFIG_MACH_CENTRO
static struct gpiod_lookup_table centro685_mci_gpio_table = {
.dev_id = "pxa2xx-mci.0",
.table = {
GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
"cd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio-pxa", GPIO_NR_CENTRO_SD_POWER,
"power", GPIO_ACTIVE_LOW),
{ },
},
};
static void __init centro_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
palmphone_common_init();
palm27x_mmc_init(&centro685_mci_gpio_table);
}
#endif
#ifdef CONFIG_MACH_TREO680
MACHINE_START(TREO680, "Palm Treo 680")
.atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = treo680_init,
.restart = pxa_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_CENTRO
MACHINE_START(CENTRO, "Palm Centro 685")
.atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.nr_irqs = PXA_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = centro_init,
.restart = pxa_restart,
MACHINE_END
#endif
View git blame Copy permalink