alistair23-linux/net/rxrpc/sysctl.c
David Howells a158bdd324 rxrpc: Fix call timeouts
Fix the rxrpc call expiration timeouts and make them settable from
userspace.  By analogy with other rx implementations, there should be three
timeouts:

 (1) "Normal timeout"

     This is set for all calls and is triggered if we haven't received any
     packets from the peer in a while.  It is measured from the last time
     we received any packet on that call.  This is not reset by any
     connection packets (such as CHALLENGE/RESPONSE packets).

     If a service operation takes a long time, the server should generate
     PING ACKs at a duration that's substantially less than the normal
     timeout so is to keep both sides alive.  This is set at 1/6 of normal
     timeout.

 (2) "Idle timeout"

     This is set only for a service call and is triggered if we stop
     receiving the DATA packets that comprise the request data.  It is
     measured from the last time we received a DATA packet.

 (3) "Hard timeout"

     This can be set for a call and specified the maximum lifetime of that
     call.  It should not be specified by default.  Some operations (such
     as volume transfer) take a long time.

Allow userspace to set/change the timeouts on a call with sendmsg, using a
control message:

	RXRPC_SET_CALL_TIMEOUTS

The data to the message is a number of 32-bit words, not all of which need
be given:

	u32 hard_timeout;	/* sec from first packet */
	u32 idle_timeout;	/* msec from packet Rx */
	u32 normal_timeout;	/* msec from data Rx */

This can be set in combination with any other sendmsg() that affects a
call.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 10:18:41 +00:00

162 lines
4.3 KiB
C

/* sysctls for configuring RxRPC operating parameters
*
* Copyright (C) 2014 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sysctl.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include "ar-internal.h"
static struct ctl_table_header *rxrpc_sysctl_reg_table;
static const unsigned int zero = 0;
static const unsigned int one = 1;
static const unsigned int four = 4;
static const unsigned int thirtytwo = 32;
static const unsigned int n_65535 = 65535;
static const unsigned int n_max_acks = RXRPC_RXTX_BUFF_SIZE - 1;
static const unsigned long one_jiffy = 1;
static const unsigned long max_jiffies = MAX_JIFFY_OFFSET;
/*
* RxRPC operating parameters.
*
* See Documentation/networking/rxrpc.txt and the variable definitions for more
* information on the individual parameters.
*/
static struct ctl_table rxrpc_sysctl_table[] = {
/* Values measured in milliseconds but used in jiffies */
{
.procname = "req_ack_delay",
.data = &rxrpc_requested_ack_delay,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_ms_jiffies_minmax,
.extra1 = (void *)&one_jiffy,
.extra2 = (void *)&max_jiffies,
},
{
.procname = "soft_ack_delay",
.data = &rxrpc_soft_ack_delay,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_ms_jiffies_minmax,
.extra1 = (void *)&one_jiffy,
.extra2 = (void *)&max_jiffies,
},
{
.procname = "idle_ack_delay",
.data = &rxrpc_idle_ack_delay,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_ms_jiffies_minmax,
.extra1 = (void *)&one_jiffy,
.extra2 = (void *)&max_jiffies,
},
{
.procname = "idle_conn_expiry",
.data = &rxrpc_conn_idle_client_expiry,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_ms_jiffies_minmax,
.extra1 = (void *)&one_jiffy,
.extra2 = (void *)&max_jiffies,
},
{
.procname = "idle_conn_fast_expiry",
.data = &rxrpc_conn_idle_client_fast_expiry,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_ms_jiffies_minmax,
.extra1 = (void *)&one_jiffy,
.extra2 = (void *)&max_jiffies,
},
{
.procname = "resend_timeout",
.data = &rxrpc_resend_timeout,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = proc_doulongvec_ms_jiffies_minmax,
.extra1 = (void *)&one_jiffy,
.extra2 = (void *)&max_jiffies,
},
/* Non-time values */
{
.procname = "max_client_conns",
.data = &rxrpc_max_client_connections,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&rxrpc_reap_client_connections,
},
{
.procname = "reap_client_conns",
.data = &rxrpc_reap_client_connections,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&one,
.extra2 = (void *)&rxrpc_max_client_connections,
},
{
.procname = "max_backlog",
.data = &rxrpc_max_backlog,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&four,
.extra2 = (void *)&thirtytwo,
},
{
.procname = "rx_window_size",
.data = &rxrpc_rx_window_size,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&one,
.extra2 = (void *)&n_max_acks,
},
{
.procname = "rx_mtu",
.data = &rxrpc_rx_mtu,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&one,
.extra2 = (void *)&n_65535,
},
{
.procname = "rx_jumbo_max",
.data = &rxrpc_rx_jumbo_max,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = (void *)&one,
.extra2 = (void *)&four,
},
{ }
};
int __init rxrpc_sysctl_init(void)
{
rxrpc_sysctl_reg_table = register_net_sysctl(&init_net, "net/rxrpc",
rxrpc_sysctl_table);
if (!rxrpc_sysctl_reg_table)
return -ENOMEM;
return 0;
}
void rxrpc_sysctl_exit(void)
{
if (rxrpc_sysctl_reg_table)
unregister_net_sysctl_table(rxrpc_sysctl_reg_table);
}