![Sanjeev Sharma](/assets/img/avatar_default.png)
This patch removes the .owner field for drivers which use the platform_driver_register api because this is overriden in _platform_driver_register. Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
294 lines
7.5 KiB
C
294 lines
7.5 KiB
C
/*
|
|
* DHT11/DHT22 bit banging GPIO driver
|
|
*
|
|
* Copyright (c) Harald Geyer <harald@ccbib.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/printk.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
|
|
#define DRIVER_NAME "dht11"
|
|
|
|
#define DHT11_DATA_VALID_TIME 2000000000 /* 2s in ns */
|
|
|
|
#define DHT11_EDGES_PREAMBLE 4
|
|
#define DHT11_BITS_PER_READ 40
|
|
#define DHT11_EDGES_PER_READ (2*DHT11_BITS_PER_READ + DHT11_EDGES_PREAMBLE + 1)
|
|
|
|
/* Data transmission timing (nano seconds) */
|
|
#define DHT11_START_TRANSMISSION 18 /* ms */
|
|
#define DHT11_SENSOR_RESPONSE 80000
|
|
#define DHT11_START_BIT 50000
|
|
#define DHT11_DATA_BIT_LOW 27000
|
|
#define DHT11_DATA_BIT_HIGH 70000
|
|
|
|
struct dht11 {
|
|
struct device *dev;
|
|
|
|
int gpio;
|
|
int irq;
|
|
|
|
struct completion completion;
|
|
|
|
s64 timestamp;
|
|
int temperature;
|
|
int humidity;
|
|
|
|
/* num_edges: -1 means "no transmission in progress" */
|
|
int num_edges;
|
|
struct {s64 ts; int value; } edges[DHT11_EDGES_PER_READ];
|
|
};
|
|
|
|
static unsigned char dht11_decode_byte(int *timing, int threshold)
|
|
{
|
|
unsigned char ret = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < 8; ++i) {
|
|
ret <<= 1;
|
|
if (timing[i] >= threshold)
|
|
++ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dht11_decode(struct dht11 *dht11, int offset)
|
|
{
|
|
int i, t, timing[DHT11_BITS_PER_READ], threshold,
|
|
timeres = DHT11_SENSOR_RESPONSE;
|
|
unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum;
|
|
|
|
/* Calculate timestamp resolution */
|
|
for (i = 0; i < dht11->num_edges; ++i) {
|
|
t = dht11->edges[i].ts - dht11->edges[i-1].ts;
|
|
if (t > 0 && t < timeres)
|
|
timeres = t;
|
|
}
|
|
if (2*timeres > DHT11_DATA_BIT_HIGH) {
|
|
pr_err("dht11: timeresolution %d too bad for decoding\n",
|
|
timeres);
|
|
return -EIO;
|
|
}
|
|
threshold = DHT11_DATA_BIT_HIGH / timeres;
|
|
if (DHT11_DATA_BIT_LOW/timeres + 1 >= threshold)
|
|
pr_err("dht11: WARNING: decoding ambiguous\n");
|
|
|
|
/* scale down with timeres and check validity */
|
|
for (i = 0; i < DHT11_BITS_PER_READ; ++i) {
|
|
t = dht11->edges[offset + 2*i + 2].ts -
|
|
dht11->edges[offset + 2*i + 1].ts;
|
|
if (!dht11->edges[offset + 2*i + 1].value)
|
|
return -EIO; /* lost synchronisation */
|
|
timing[i] = t / timeres;
|
|
}
|
|
|
|
hum_int = dht11_decode_byte(timing, threshold);
|
|
hum_dec = dht11_decode_byte(&timing[8], threshold);
|
|
temp_int = dht11_decode_byte(&timing[16], threshold);
|
|
temp_dec = dht11_decode_byte(&timing[24], threshold);
|
|
checksum = dht11_decode_byte(&timing[32], threshold);
|
|
|
|
if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum)
|
|
return -EIO;
|
|
|
|
dht11->timestamp = iio_get_time_ns();
|
|
if (hum_int < 20) { /* DHT22 */
|
|
dht11->temperature = (((temp_int & 0x7f) << 8) + temp_dec) *
|
|
((temp_int & 0x80) ? -100 : 100);
|
|
dht11->humidity = ((hum_int << 8) + hum_dec) * 100;
|
|
} else if (temp_dec == 0 && hum_dec == 0) { /* DHT11 */
|
|
dht11->temperature = temp_int * 1000;
|
|
dht11->humidity = hum_int * 1000;
|
|
} else {
|
|
dev_err(dht11->dev,
|
|
"Don't know how to decode data: %d %d %d %d\n",
|
|
hum_int, hum_dec, temp_int, temp_dec);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dht11_read_raw(struct iio_dev *iio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
int *val, int *val2, long m)
|
|
{
|
|
struct dht11 *dht11 = iio_priv(iio_dev);
|
|
int ret;
|
|
|
|
if (dht11->timestamp + DHT11_DATA_VALID_TIME < iio_get_time_ns()) {
|
|
reinit_completion(&dht11->completion);
|
|
|
|
dht11->num_edges = 0;
|
|
ret = gpio_direction_output(dht11->gpio, 0);
|
|
if (ret)
|
|
goto err;
|
|
msleep(DHT11_START_TRANSMISSION);
|
|
ret = gpio_direction_input(dht11->gpio);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = wait_for_completion_killable_timeout(&dht11->completion,
|
|
HZ);
|
|
if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) {
|
|
dev_err(&iio_dev->dev,
|
|
"Only %d signal edges detected\n",
|
|
dht11->num_edges);
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = dht11_decode(dht11,
|
|
dht11->num_edges == DHT11_EDGES_PER_READ ?
|
|
DHT11_EDGES_PREAMBLE :
|
|
DHT11_EDGES_PREAMBLE - 2);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = IIO_VAL_INT;
|
|
if (chan->type == IIO_TEMP)
|
|
*val = dht11->temperature;
|
|
else if (chan->type == IIO_HUMIDITYRELATIVE)
|
|
*val = dht11->humidity;
|
|
else
|
|
ret = -EINVAL;
|
|
err:
|
|
dht11->num_edges = -1;
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info dht11_iio_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.read_raw = dht11_read_raw,
|
|
};
|
|
|
|
/*
|
|
* IRQ handler called on GPIO edges
|
|
*/
|
|
static irqreturn_t dht11_handle_irq(int irq, void *data)
|
|
{
|
|
struct iio_dev *iio = data;
|
|
struct dht11 *dht11 = iio_priv(iio);
|
|
|
|
/* TODO: Consider making the handler safe for IRQ sharing */
|
|
if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
|
|
dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
|
|
dht11->edges[dht11->num_edges++].value =
|
|
gpio_get_value(dht11->gpio);
|
|
|
|
if (dht11->num_edges >= DHT11_EDGES_PER_READ)
|
|
complete(&dht11->completion);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct iio_chan_spec dht11_chan_spec[] = {
|
|
{ .type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), },
|
|
{ .type = IIO_HUMIDITYRELATIVE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), }
|
|
};
|
|
|
|
static const struct of_device_id dht11_dt_ids[] = {
|
|
{ .compatible = "dht11", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dht11_dt_ids);
|
|
|
|
static int dht11_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct dht11 *dht11;
|
|
struct iio_dev *iio;
|
|
int ret;
|
|
|
|
iio = devm_iio_device_alloc(dev, sizeof(*dht11));
|
|
if (!iio) {
|
|
dev_err(dev, "Failed to allocate IIO device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dht11 = iio_priv(iio);
|
|
dht11->dev = dev;
|
|
|
|
dht11->gpio = ret = of_get_gpio(node, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = devm_gpio_request_one(dev, dht11->gpio, GPIOF_IN, pdev->name);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dht11->irq = gpio_to_irq(dht11->gpio);
|
|
if (dht11->irq < 0) {
|
|
dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
|
|
return -EINVAL;
|
|
}
|
|
ret = devm_request_irq(dev, dht11->irq, dht11_handle_irq,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
pdev->name, iio);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dht11->timestamp = iio_get_time_ns() - DHT11_DATA_VALID_TIME - 1;
|
|
dht11->num_edges = -1;
|
|
|
|
platform_set_drvdata(pdev, iio);
|
|
|
|
init_completion(&dht11->completion);
|
|
iio->name = pdev->name;
|
|
iio->dev.parent = &pdev->dev;
|
|
iio->info = &dht11_iio_info;
|
|
iio->modes = INDIO_DIRECT_MODE;
|
|
iio->channels = dht11_chan_spec;
|
|
iio->num_channels = ARRAY_SIZE(dht11_chan_spec);
|
|
|
|
return devm_iio_device_register(dev, iio);
|
|
}
|
|
|
|
static struct platform_driver dht11_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = dht11_dt_ids,
|
|
},
|
|
.probe = dht11_probe,
|
|
};
|
|
|
|
module_platform_driver(dht11_driver);
|
|
|
|
MODULE_AUTHOR("Harald Geyer <harald@ccbib.org>");
|
|
MODULE_DESCRIPTION("DHT11 humidity/temperature sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|