1
0
Fork 0
alistair23-linux/arch/arm
Nishanth Menon d20f997b4d ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869
Pinmuxing for DRA7x/AM57x family of processors need to be done in IO
isolation as part of initial bootloader executed from SRAM. This is
done as part of iodelay configuration sequence and is required due
to the limitations introduced by erratum ID: i869[1] (IO Glitches
can occur when changing IO settings) and elaborated in the Technical
Reference Manual[2] 18.4.6.1.7 Isolation Requirements.

Only peripheral that is permitted for dynamic pin mux configuration
is MMC and DCAN. MMC is permitted to change to accommodate the
requirements for varied speeds (which require IO-delay support in
kernel as well). DCAN is a result of i893[1] (DCAN initialization
sequence). However, since we don't use DCAN on X15, with the exception
of MMC, all other pin mux configurations are removed from the dts.

[1] http://www.ti.com/lit/pdf/sprz429
[2] http://www.ti.com/lit/pdf/sprui30

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-09-13 16:14:19 -07:00
..
boot ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869 2016-09-13 16:14:19 -07:00
common dma-mapping: use unsigned long for dma_attrs 2016-08-04 08:50:07 -04:00
configs ARM: SoC defconfig updates for v4.8 2016-08-01 18:30:44 -04:00
crypto crypto: ghash-ce - Fix cryptd reordering 2016-06-23 18:29:54 +08:00
firmware
include dma-mapping: use unsigned long for dma_attrs 2016-08-04 08:50:07 -04:00
kernel arm: jump label may reference text in __exit 2016-08-04 08:50:07 -04:00
kvm KVM/ARM Changes for v4.8 - Take 2 2016-08-04 13:59:56 +02:00
lib ARM: 8306/1: loop_udelay: remove bogomips value limitation 2016-06-22 19:55:12 +01:00
mach-alpine
mach-artpec arm: Remove unnecessary of_platform_populate with default match table 2016-06-23 14:58:37 -05:00
mach-asm9260
mach-aspeed
mach-at91 ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
mach-axxia
mach-bcm ARM: DT updates for v4.8 2016-08-01 18:37:45 -04:00
mach-berlin
mach-clps711x clocksource/drivers/clps_711x: fixup for "ARM: clps711x: 2016-08-01 21:25:20 -04:00
mach-cns3xxx arm: use of_platform_default_populate() to populate 2016-06-23 15:00:39 -05:00
mach-davinci ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
mach-digicolor
mach-dove
mach-ebsa110
mach-efm32
mach-ep93xx rtc: m48t86: move m48t86.h to platform_data 2016-06-27 18:15:25 +02:00
mach-exynos ARM: SoC driver updates for v4.8 2016-08-01 18:36:01 -04:00
mach-footbridge
mach-gemini
mach-highbank arm: Remove unnecessary of_platform_populate with default match table 2016-06-23 14:58:37 -05:00
mach-hisi ARM: hisi: consolidate the hisilicon machine entries 2016-07-07 09:37:59 +01:00
mach-imx ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
mach-integrator treewide: replace obsolete _refok by __ref 2016-08-02 17:31:41 -04:00
mach-iop13xx
mach-iop32x
mach-iop33x
mach-ixp4xx
mach-keystone ARM: SoC defconfig updates for v4.8 2016-08-01 18:30:44 -04:00
mach-ks8695
mach-lpc18xx
mach-lpc32xx arm: use of_platform_default_populate() to populate 2016-06-23 15:00:39 -05:00
mach-mediatek
mach-meson arm: meson: explicitly select clk drivers 2016-07-07 17:54:25 +02:00
mach-mmp
mach-moxart ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-mv78xx0 treewide: replace obsolete _refok by __ref 2016-08-02 17:31:41 -04:00
mach-mvebu ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-mxs ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-netx
mach-nomadik
mach-nspire DeviceTree update for 4.8: 2016-07-30 11:32:01 -07:00
mach-omap1 ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
mach-omap2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2016-08-03 07:26:11 -04:00
mach-orion5x RTC for 4.8 2016-08-05 09:48:22 -04:00
mach-oxnas Merge ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB changes into next/soc 2016-07-06 18:00:32 +02:00
mach-picoxcell ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-prima2 ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-pxa RTC for 4.8 2016-08-05 09:48:22 -04:00
mach-qcom ARM: qcom: Add support for MDM9615 2016-06-24 22:57:23 -05:00
mach-realview
mach-rockchip ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-rpc
mach-s3c24xx ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-s3c64xx ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
mach-s5pv210
mach-sa1100
mach-shmobile ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
mach-socfpga
mach-spear ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-sti Highlights: 2016-07-14 15:08:15 +02:00
mach-stm32
mach-sunxi
mach-tango ARM: tango: add Suspend-to-RAM support 2016-07-07 16:09:30 +02:00
mach-tegra ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-u300 ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-uniphier Merge ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB changes into next/soc 2016-07-06 18:00:32 +02:00
mach-ux500 ARM: SoC driver updates for v4.8 2016-08-01 18:36:01 -04:00
mach-versatile arm: use of_platform_default_populate() to populate 2016-06-23 15:00:39 -05:00
mach-vexpress ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-vt8500 ARM: SoC cleanups for v4.8 2016-08-01 18:21:13 -04:00
mach-w90x900
mach-zx
mach-zynq arm: use of_platform_default_populate() to populate 2016-06-23 15:00:39 -05:00
mm dma-mapping: use unsigned long for dma_attrs 2016-08-04 08:50:07 -04:00
net
nwfpe
oprofile
plat-iop ARM: iop: Fix indentation 2016-07-07 18:06:40 +02:00
plat-omap
plat-orion
plat-pxa
plat-samsung ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
plat-versatile
probes
tools
vdso
vfp arm: Convert VFP hotplug notifiers to state machine 2016-07-15 10:40:22 +02:00
xen dma-mapping: use unsigned long for dma_attrs 2016-08-04 08:50:07 -04:00
Kconfig PCI changes for the v4.8 merge window: 2016-08-02 17:12:29 -04:00
Kconfig-nommu
Kconfig.debug Merge tag 'arm-soc/for-4.8/soc-part2' of http://github.com/Broadcom/stblinux into next/soc 2016-07-07 16:09:25 +02:00
Makefile ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00