1
0
Fork 0
alistair23-linux/drivers/usb
Thomas Gleixner d2e6d62c9c usb: musb: cppi41: restart hrtimer only if not yet done
commit c58d80f52 ("usb: musb: Ensure that cppi41 timer gets armed on
premature DMA TX irq") fixed hrtimer scheduling bug. There is one left
which does not trigger that often.
The following scenario is still possible:

    lock(&x->lock);
    hrtimer_start(&x->t);
    unlock(&x->lock);

expires:
    t->function();
                                lock(&x->lock);
    lock(&x->lock);             if (!hrtimer_queued(&x->t))
                                        hrtimer_start(&x->t);
                                unlock(&x->lock);

    if (!list_empty(x->early_tx_list))
           ret = HRTIMER_RESTART;
->         hrtimer_forward_now(...)
    } else
           ret = HRTIMER_NORESTART;

    unlock(&x->lock);

and the timer callback returns HRTIMER_RESTART for an armed timer. This
is wrong and we run into the BUG_ON() in __run_hrtimer().
This can happens on SMP or PREEMPT-RT.
The patch fixes the problem by only starting the timer if the timer is
not yet queued.

Cc: stable@vger.kernel.org
Reported-by: Torben Hohn <torbenh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: collected information and created a patch + description based
          on it]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-23 09:55:41 -05:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: rename phy to usb_phy in HCD 2014-09-29 11:52:59 -04:00
class usb: class: usbtmc.c: Cleaning up uninitialized variables 2014-07-09 15:59:10 -07:00
common usb: Add LED triggers for USB activity 2014-09-25 17:05:12 +02:00
core usb: hcd: add generic PHY support 2014-09-29 11:54:02 -04:00
dwc2 usb: gadget: Refactor request completion 2014-09-25 16:58:50 +02:00
dwc3 usb: dwc3: ep0: fix Data Phase for transfer sizes aligned to wMaxPacketSize 2014-10-23 09:55:35 -05:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget usb: gadget: function: f_obex: fix Interface Descriptor Test 2014-10-20 15:58:49 -05:00
host Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2014-10-08 21:40:54 -04:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc usb: rename phy to usb_phy in HCD 2014-09-29 11:52:59 -04:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb usb: musb: cppi41: restart hrtimer only if not yet done 2014-10-23 09:55:41 -05:00
phy USB: Remove .owner field for driver 2014-09-28 21:55:10 -04:00
renesas_usbhs usb: gadget: Refactor request completion 2014-09-25 16:58:50 +02:00
serial TTY/Serial driver patches for 3.18-rc1 2014-10-08 06:52:11 -04:00
storage USB patches for 3.18-rc1 2014-10-08 06:47:31 -04:00
usbip usbip: remove struct usb_device_id table 2014-08-25 10:40:58 -07:00
wusbcore usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
Kconfig usb: Add LED triggers for USB activity 2014-09-25 17:05:12 +02:00
Makefile usbip: move usbip kernel code out of staging 2014-08-25 10:40:06 -07:00
README usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.