![Martin Blumenstingl](/assets/img/avatar_default.png)
The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. It comes with: - 1 GiB or 2 GiB of DDR3 memory depending on the model - 8 GB or 16 GB eMMC flash depending on the model - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not support Bluetooth, not supported by any mailine driver) - an LED 7 segment display with an FD628 controller (not supported by any mainline driver) - HDMI and AV (CVBS) output - 2x USB (utilizing both USB ports provided by the SoC) - micro SD card slot The board seems to be very similar to the P23x and Q20x reference boards: - eMMC reset routed to BOOT_9 - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference clock is 32.768KHz on PWM_E - SD card detection is routed to CARD_6 - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT) - uart_AO can be accessed after opening the case and soldering RX, TX and GND lines onto the exposed solder points (marked with RX, TX and GND) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
132 lines
4.2 KiB
Plaintext
132 lines
4.2 KiB
Plaintext
Amlogic MesonX device tree bindings
|
|
-------------------------------------------
|
|
|
|
Work in progress statement:
|
|
|
|
Device tree files and bindings applying to Amlogic SoCs and boards are
|
|
considered "unstable". Any Amlogic device tree binding may change at
|
|
any time. Be sure to use a device tree binary and a kernel image
|
|
generated from the same source tree.
|
|
|
|
Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
|
|
stable binding/ABI.
|
|
|
|
---------------------------------------------------------------
|
|
|
|
Boards with the Amlogic Meson6 SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson6"
|
|
|
|
Boards with the Amlogic Meson8 SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson8";
|
|
|
|
Boards with the Amlogic Meson8b SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson8b";
|
|
|
|
Boards with the Amlogic Meson8m2 SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson8m2";
|
|
|
|
Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,meson-gxbb";
|
|
|
|
Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,s905x", "amlogic,meson-gxl";
|
|
|
|
Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,s905d", "amlogic,meson-gxl";
|
|
|
|
Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,s805x", "amlogic,meson-gxl";
|
|
|
|
Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,s905w", "amlogic,meson-gxl";
|
|
|
|
Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,s912", "amlogic,meson-gxm";
|
|
|
|
Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
|
|
Required root node property:
|
|
compatible: "amlogic,a113d", "amlogic,meson-axg";
|
|
|
|
Board compatible values (alphabetically, grouped by SoC):
|
|
|
|
- "geniatech,atv1200" (Meson6)
|
|
|
|
- "minix,neo-x8" (Meson8)
|
|
|
|
- "hardkernel,odroid-c1" (Meson8b)
|
|
- "tronfy,mxq" (Meson8b)
|
|
|
|
- "tronsmart,mxiii-plus" (Meson8m2)
|
|
|
|
- "amlogic,p200" (Meson gxbb)
|
|
- "amlogic,p201" (Meson gxbb)
|
|
- "friendlyarm,nanopi-k2" (Meson gxbb)
|
|
- "hardkernel,odroid-c2" (Meson gxbb)
|
|
- "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
|
|
- "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
|
|
- "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
|
|
- "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
|
|
- "wetek,hub" (Meson gxbb)
|
|
- "wetek,play2" (Meson gxbb)
|
|
|
|
- "amlogic,p212" (Meson gxl s905x)
|
|
- "hwacom,amazetv" (Meson gxl s905x)
|
|
- "khadas,vim" (Meson gxl s905x)
|
|
- "libretech,cc" (Meson gxl s905x)
|
|
|
|
- "amlogic,p230" (Meson gxl s905d)
|
|
- "amlogic,p231" (Meson gxl s905d)
|
|
|
|
- "amlogic,p241" (Meson gxl s805x)
|
|
|
|
- "amlogic,p281" (Meson gxl s905w)
|
|
- "oranth,tx3-mini" (Meson gxl s905w)
|
|
|
|
- "amlogic,q200" (Meson gxm s912)
|
|
- "amlogic,q201" (Meson gxm s912)
|
|
- "khadas,vim2" (Meson gxm s912)
|
|
- "kingnovel,r-box-pro" (Meson gxm S912)
|
|
- "nexbox,a1" (Meson gxm s912)
|
|
- "tronsmart,vega-s96" (Meson gxm s912)
|
|
|
|
- "amlogic,s400" (Meson axg a113d)
|
|
|
|
Amlogic Meson Firmware registers Interface
|
|
------------------------------------------
|
|
|
|
The Meson SoCs have a register bank with status and data shared with the
|
|
secure firmware.
|
|
|
|
Required properties:
|
|
- compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
|
|
|
|
Properties should indentify components of this register interface :
|
|
|
|
Meson GX SoC Information
|
|
------------------------
|
|
A firmware register encodes the SoC type, package and revision information on
|
|
the Meson GX SoCs.
|
|
If present, the following property should be added :
|
|
|
|
Optional properties:
|
|
- amlogic,has-chip-id: If present, the interface gives the current SoC version.
|
|
|
|
Example
|
|
-------
|
|
|
|
ao-secure@140 {
|
|
compatible = "amlogic,meson-gx-ao-secure", "syscon";
|
|
reg = <0x0 0x140 0x0 0x140>;
|
|
amlogic,has-chip-id;
|
|
};
|