![Jisheng Zhang](/assets/img/avatar_default.png)
Add as370 to existing berlin pinctrl device tree binding. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
48 lines
1.4 KiB
Plaintext
48 lines
1.4 KiB
Plaintext
* Pin-controller driver for the Marvell Berlin SoCs
|
|
|
|
Pin control registers are part of both chip controller and system
|
|
controller register sets. Pin controller nodes should be a sub-node of
|
|
either the chip controller or system controller node. The pins
|
|
controlled are organized in groups, so no actual pin information is
|
|
needed.
|
|
|
|
A pin-controller node should contain subnodes representing the pin group
|
|
configurations, one per function. Each subnode has the group name and
|
|
the muxing function used.
|
|
|
|
Be aware the Marvell Berlin datasheets use the keyword 'mode' for what
|
|
is called a 'function' in the pin-controller subsystem.
|
|
|
|
Required properties:
|
|
- compatible: should be one of:
|
|
"marvell,berlin2-soc-pinctrl",
|
|
"marvell,berlin2-system-pinctrl",
|
|
"marvell,berlin2cd-soc-pinctrl",
|
|
"marvell,berlin2cd-system-pinctrl",
|
|
"marvell,berlin2q-soc-pinctrl",
|
|
"marvell,berlin2q-system-pinctrl",
|
|
"marvell,berlin4ct-avio-pinctrl",
|
|
"marvell,berlin4ct-soc-pinctrl",
|
|
"marvell,berlin4ct-system-pinctrl",
|
|
"syna,as370-soc-pinctrl"
|
|
|
|
Required subnode-properties:
|
|
- groups: a list of strings describing the group names.
|
|
- function: a string describing the function used to mux the groups.
|
|
|
|
Example:
|
|
|
|
sys_pinctrl: pin-controller {
|
|
compatible = "marvell,berlin2q-system-pinctrl";
|
|
|
|
uart0_pmux: uart0-pmux {
|
|
groups = "GSM12";
|
|
function = "uart0";
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0_pmux>;
|
|
pinctrl-names = "default";
|
|
};
|