c51ce403d3
Add DT support for the TI TPS51632. Add device binding document also. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
28 lines
755 B
Plaintext
28 lines
755 B
Plaintext
TPS51632 Voltage regulators
|
|
|
|
Required properties:
|
|
- compatible: Must be "ti,tps51632"
|
|
- reg: I2C slave address
|
|
|
|
Optional properties:
|
|
- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.
|
|
- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this
|
|
will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage
|
|
step is 10mV as per datasheet.
|
|
|
|
Any property defined as part of the core regulator binding, defined in
|
|
regulator.txt, can also be used.
|
|
|
|
Example:
|
|
|
|
tps51632 {
|
|
compatible = "ti,tps51632";
|
|
reg = <0x43>;
|
|
regulator-name = "tps51632-vout";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-boot-on;
|
|
ti,enable-pwm-dvfs;
|
|
ti,dvfs-step-20mV;
|
|
};
|