alistair23-linux/drivers/mfd/ti_am335x_tscadc.c
Sebastian Andrzej Siewior 18926edebc iio: ti_am335x_adc: Allow to specify input line
The TSC part allows to specify the input lines. The IIO part assumes
that it usues always the last few, that means if IIO has adc-channels
set to 2 it will use channel 6 and 7. However it might make sense to use
only 6.
This patch changes the device property (which was introduced recently
and was never in an official release) in a way that the user can specify
which of the AIN lines should be used. In Addition to this, the name is
now AINx where x is the channel number i.e. for AIN6 we would have 6.
Prior this, it always started counting at 0 which is confusing. In
addition to this, it also checks for correct step number during reading
and does not rely on proper FIFO depth.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2013-06-12 18:50:23 +02:00

341 lines
8.5 KiB
C

/*
* TI Touch Screen / ADC MFD driver
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/regmap.h>
#include <linux/mfd/core.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/mfd/ti_am335x_tscadc.h>
static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg)
{
unsigned int val;
regmap_read(tsadc->regmap_tscadc, reg, &val);
return val;
}
static void tscadc_writel(struct ti_tscadc_dev *tsadc, unsigned int reg,
unsigned int val)
{
regmap_write(tsadc->regmap_tscadc, reg, val);
}
static const struct regmap_config tscadc_regmap_config = {
.name = "ti_tscadc",
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
};
void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc)
{
tscadc_writel(tsadc, REG_SE, tsadc->reg_se_cache);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_update);
void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val)
{
spin_lock(&tsadc->reg_lock);
tsadc->reg_se_cache |= val;
spin_unlock(&tsadc->reg_lock);
am335x_tsc_se_update(tsadc);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_set);
void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val)
{
spin_lock(&tsadc->reg_lock);
tsadc->reg_se_cache &= ~val;
spin_unlock(&tsadc->reg_lock);
am335x_tsc_se_update(tsadc);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_clr);
static void tscadc_idle_config(struct ti_tscadc_dev *config)
{
unsigned int idleconfig;
idleconfig = STEPCONFIG_YNN | STEPCONFIG_INM_ADCREFM |
STEPCONFIG_INP_ADCREFM | STEPCONFIG_YPN;
tscadc_writel(config, REG_IDLECONFIG, idleconfig);
}
static int ti_tscadc_probe(struct platform_device *pdev)
{
struct ti_tscadc_dev *tscadc;
struct resource *res;
struct clk *clk;
struct device_node *node = pdev->dev.of_node;
struct mfd_cell *cell;
struct property *prop;
const __be32 *cur;
u32 val;
int err, ctrl;
int clk_value, clock_rate;
int tsc_wires = 0, adc_channels = 0, total_channels;
int readouts = 0;
if (!pdev->dev.of_node) {
dev_err(&pdev->dev, "Could not find valid DT data.\n");
return -EINVAL;
}
node = of_get_child_by_name(pdev->dev.of_node, "tsc");
of_property_read_u32(node, "ti,wires", &tsc_wires);
of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
node = of_get_child_by_name(pdev->dev.of_node, "adc");
of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
adc_channels++;
if (val > 7) {
dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
val);
return -EINVAL;
}
}
total_channels = tsc_wires + adc_channels;
if (total_channels > 8) {
dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
return -EINVAL;
}
if (total_channels == 0) {
dev_err(&pdev->dev, "Need atleast one channel.\n");
return -EINVAL;
}
if (readouts * 2 + 2 + adc_channels > 16) {
dev_err(&pdev->dev, "Too many step configurations requested\n");
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no memory resource defined.\n");
return -EINVAL;
}
/* Allocate memory for device */
tscadc = devm_kzalloc(&pdev->dev,
sizeof(struct ti_tscadc_dev), GFP_KERNEL);
if (!tscadc) {
dev_err(&pdev->dev, "failed to allocate memory.\n");
return -ENOMEM;
}
tscadc->dev = &pdev->dev;
err = platform_get_irq(pdev, 0);
if (err < 0) {
dev_err(&pdev->dev, "no irq ID is specified.\n");
goto ret;
} else
tscadc->irq = err;
res = devm_request_mem_region(&pdev->dev,
res->start, resource_size(res), pdev->name);
if (!res) {
dev_err(&pdev->dev, "failed to reserve registers.\n");
return -EBUSY;
}
tscadc->tscadc_base = devm_ioremap(&pdev->dev,
res->start, resource_size(res));
if (!tscadc->tscadc_base) {
dev_err(&pdev->dev, "failed to map registers.\n");
return -ENOMEM;
}
tscadc->regmap_tscadc = devm_regmap_init_mmio(&pdev->dev,
tscadc->tscadc_base, &tscadc_regmap_config);
if (IS_ERR(tscadc->regmap_tscadc)) {
dev_err(&pdev->dev, "regmap init failed\n");
err = PTR_ERR(tscadc->regmap_tscadc);
goto ret;
}
spin_lock_init(&tscadc->reg_lock);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
/*
* The TSC_ADC_Subsystem has 2 clock domains
* OCP_CLK and ADC_CLK.
* The ADC clock is expected to run at target of 3MHz,
* and expected to capture 12-bit data at a rate of 200 KSPS.
* The TSC_ADC_SS controller design assumes the OCP clock is
* at least 6x faster than the ADC clock.
*/
clk = clk_get(&pdev->dev, "adc_tsc_fck");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get TSC fck\n");
err = PTR_ERR(clk);
goto err_disable_clk;
}
clock_rate = clk_get_rate(clk);
clk_put(clk);
clk_value = clock_rate / ADC_CLK;
if (clk_value < MAX_CLK_DIV) {
dev_err(&pdev->dev, "clock input less than min clock requirement\n");
err = -EINVAL;
goto err_disable_clk;
}
/* TSCADC_CLKDIV needs to be configured to the value minus 1 */
clk_value = clk_value - 1;
tscadc_writel(tscadc, REG_CLKDIV, clk_value);
/* Set the control register bits */
ctrl = CNTRLREG_STEPCONFIGWRT |
CNTRLREG_TSCENB |
CNTRLREG_STEPID |
CNTRLREG_4WIRE;
tscadc_writel(tscadc, REG_CTRL, ctrl);
/* Set register bits for Idle Config Mode */
tscadc_idle_config(tscadc);
/* Enable the TSC module enable bit */
ctrl = tscadc_readl(tscadc, REG_CTRL);
ctrl |= CNTRLREG_TSCSSENB;
tscadc_writel(tscadc, REG_CTRL, ctrl);
tscadc->used_cells = 0;
tscadc->tsc_cell = -1;
tscadc->adc_cell = -1;
/* TSC Cell */
if (tsc_wires > 0) {
tscadc->tsc_cell = tscadc->used_cells;
cell = &tscadc->cells[tscadc->used_cells++];
cell->name = "TI-am335x-tsc";
cell->of_compatible = "ti,am3359-tsc";
cell->platform_data = &tscadc;
cell->pdata_size = sizeof(tscadc);
}
/* ADC Cell */
if (adc_channels > 0) {
tscadc->adc_cell = tscadc->used_cells;
cell = &tscadc->cells[tscadc->used_cells++];
cell->name = "TI-am335x-adc";
cell->of_compatible = "ti,am3359-adc";
cell->platform_data = &tscadc;
cell->pdata_size = sizeof(tscadc);
}
err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
tscadc->used_cells, NULL, 0, NULL);
if (err < 0)
goto err_disable_clk;
device_init_wakeup(&pdev->dev, true);
platform_set_drvdata(pdev, tscadc);
return 0;
err_disable_clk:
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
ret:
return err;
}
static int ti_tscadc_remove(struct platform_device *pdev)
{
struct ti_tscadc_dev *tscadc = platform_get_drvdata(pdev);
tscadc_writel(tscadc, REG_SE, 0x00);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
mfd_remove_devices(tscadc->dev);
return 0;
}
#ifdef CONFIG_PM
static int tscadc_suspend(struct device *dev)
{
struct ti_tscadc_dev *tscadc_dev = dev_get_drvdata(dev);
tscadc_writel(tscadc_dev, REG_SE, 0x00);
pm_runtime_put_sync(dev);
return 0;
}
static int tscadc_resume(struct device *dev)
{
struct ti_tscadc_dev *tscadc_dev = dev_get_drvdata(dev);
unsigned int restore, ctrl;
pm_runtime_get_sync(dev);
/* context restore */
ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_TSCENB |
CNTRLREG_STEPID | CNTRLREG_4WIRE;
tscadc_writel(tscadc_dev, REG_CTRL, ctrl);
tscadc_idle_config(tscadc_dev);
am335x_tsc_se_update(tscadc_dev);
restore = tscadc_readl(tscadc_dev, REG_CTRL);
tscadc_writel(tscadc_dev, REG_CTRL,
(restore | CNTRLREG_TSCSSENB));
return 0;
}
static const struct dev_pm_ops tscadc_pm_ops = {
.suspend = tscadc_suspend,
.resume = tscadc_resume,
};
#define TSCADC_PM_OPS (&tscadc_pm_ops)
#else
#define TSCADC_PM_OPS NULL
#endif
static const struct of_device_id ti_tscadc_dt_ids[] = {
{ .compatible = "ti,am3359-tscadc", },
{ }
};
MODULE_DEVICE_TABLE(of, ti_tscadc_dt_ids);
static struct platform_driver ti_tscadc_driver = {
.driver = {
.name = "ti_am3359-tscadc",
.owner = THIS_MODULE,
.pm = TSCADC_PM_OPS,
.of_match_table = of_match_ptr(ti_tscadc_dt_ids),
},
.probe = ti_tscadc_probe,
.remove = ti_tscadc_remove,
};
module_platform_driver(ti_tscadc_driver);
MODULE_DESCRIPTION("TI touchscreen / ADC MFD controller driver");
MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
MODULE_LICENSE("GPL");