647efef69d
The missing "compatible" entries are needed by drivers/clk/ti/clkctrl.c, and without them the structures initialized in drivers/clk/ti/clk-814x.c are not passed to configuration code. The result is a "not found from clkctrl data" error message, although boot proceeds anyway. The reason why the compatible is not found is because the board specific files override the SoC compatible without including it. This did not cause any issues until with the clkctrl nodes got introduced. Very lightly tested on a (lurching) AM3874 design that's in the middle of a kernel upgrade from TI's abandoned 2.6.37 tree. Also tested on j5eco-evm and hp-t410 to verify the clkctrl clocks are found. Fixes:bb30465b59("ARM: dts: dm814x: add clkctrl nodes") Fixes:80a06c0d83("ARM: dts: dm816x: add clkctrl nodes") Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com> [tony: updated to fix for 8168-evm, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
218 lines
5.8 KiB
Plaintext
218 lines
5.8 KiB
Plaintext
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "dm816x.dtsi"
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "DM8168 EVM";
|
|
compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x40000000 /* 1 GB */
|
|
0xc0000000 0x40000000>; /* 1 GB */
|
|
};
|
|
|
|
/* FDC6331L controlled by SD_POW pin */
|
|
vmmcsd_fixed: fixedregulator0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmcsd_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
sata_refclk: fixedclock0 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <100000000>;
|
|
};
|
|
};
|
|
|
|
&dm816x_pinmux {
|
|
mcspi1_pins: pinmux_mcspi1_pins {
|
|
pinctrl-single,pins = <
|
|
DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */
|
|
DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */
|
|
DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */
|
|
DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */
|
|
>;
|
|
};
|
|
|
|
mmc_pins: pinmux_mmc_pins {
|
|
pinctrl-single,pins = <
|
|
DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
|
|
DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
|
|
DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
|
|
DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
|
|
DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
|
|
DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
|
|
DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
|
|
DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
|
|
DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
|
|
>;
|
|
};
|
|
|
|
usb0_pins: pinmux_usb0_pins {
|
|
pinctrl-single,pins = <
|
|
DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */
|
|
>;
|
|
};
|
|
|
|
usb1_pins: pinmux_usb1_pins {
|
|
pinctrl-single,pins = <
|
|
DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
|
|
>;
|
|
};
|
|
|
|
nandflash_pins: nandflash_pins {
|
|
pinctrl-single,pins = <
|
|
DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0) /* PINCTRL207 GPMC_CS0*/
|
|
DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0) /* PINCTRL217 GPMC_ADV_ALE */
|
|
DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0) /* PINCTRL214 GPMC_OE_RE */
|
|
DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0) /* PINCTRL215 GPMC_BE0_CLE */
|
|
DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0) /* PINCTRL213 GPMC_WE */
|
|
DM816X_IOPAD(0x0b6c, MUX_MODE0) /* PINCTRL220 GPMC_WAIT */
|
|
DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0) /* PINCTRL250 GPMC_CLK */
|
|
DM816X_IOPAD(0x0ba4, MUX_MODE0) /* PINCTRL234 GPMC_D0 */
|
|
DM816X_IOPAD(0x0ba8, MUX_MODE0) /* PINCTRL234 GPMC_D1 */
|
|
DM816X_IOPAD(0x0bac, MUX_MODE0) /* PINCTRL234 GPMC_D2 */
|
|
DM816X_IOPAD(0x0bb0, MUX_MODE0) /* PINCTRL234 GPMC_D3 */
|
|
DM816X_IOPAD(0x0bb4, MUX_MODE0) /* PINCTRL234 GPMC_D4 */
|
|
DM816X_IOPAD(0x0bb8, MUX_MODE0) /* PINCTRL234 GPMC_D5 */
|
|
DM816X_IOPAD(0x0bbc, MUX_MODE0) /* PINCTRL234 GPMC_D6 */
|
|
DM816X_IOPAD(0x0bc0, MUX_MODE0) /* PINCTRL234 GPMC_D7 */
|
|
DM816X_IOPAD(0x0bc4, MUX_MODE0) /* PINCTRL234 GPMC_D8 */
|
|
DM816X_IOPAD(0x0bc8, MUX_MODE0) /* PINCTRL234 GPMC_D9 */
|
|
DM816X_IOPAD(0x0bcc, MUX_MODE0) /* PINCTRL234 GPMC_D10 */
|
|
DM816X_IOPAD(0x0bd0, MUX_MODE0) /* PINCTRL234 GPMC_D11 */
|
|
DM816X_IOPAD(0x0bd4, MUX_MODE0) /* PINCTRL234 GPMC_D12 */
|
|
DM816X_IOPAD(0x0bd8, MUX_MODE0) /* PINCTRL234 GPMC_D13 */
|
|
DM816X_IOPAD(0x0bdc, MUX_MODE0) /* PINCTRL234 GPMC_D14 */
|
|
DM816X_IOPAD(0x0be0, MUX_MODE0) /* PINCTRL234 GPMC_D15 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
extgpio0: pcf8575@20 {
|
|
compatible = "nxp,pcf8575";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
extgpio1: pcf8575@20 {
|
|
compatible = "nxp,pcf8575";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nandflash_pins>;
|
|
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
linux,mtd-name= "micron,mt29f2g16aadwp";
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ti,nand-ecc-opt = "bch8";
|
|
ti,elm-id = <&elm>;
|
|
nand-bus-width = <16>;
|
|
gpmc,device-width = <2>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-on-ns = <0>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
partition@0 {
|
|
label = "X-Loader";
|
|
reg = <0 0x80000>;
|
|
};
|
|
partition@0x80000 {
|
|
label = "U-Boot";
|
|
reg = <0x80000 0x1c0000>;
|
|
};
|
|
partition@0x1c0000 {
|
|
label = "Environment";
|
|
reg = <0x240000 0x40000>;
|
|
};
|
|
partition@0x280000 {
|
|
label = "Kernel";
|
|
reg = <0x280000 0x500000>;
|
|
};
|
|
partition@0x780000 {
|
|
label = "Filesystem";
|
|
reg = <0x780000 0xf880000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mcspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcspi1_pins>;
|
|
|
|
m25p80@0 {
|
|
compatible = "w25x32";
|
|
spi-max-frequency = <48000000>;
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc_pins>;
|
|
vmmc-supply = <&vmmcsd_fixed>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
/* At least dm8168-evm rev c won't support multipoint, later may */
|
|
&usb0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb0_pins>;
|
|
mentor,multipoint = <0>;
|
|
};
|
|
|
|
&usb1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb1_pins>;
|
|
mentor,multipoint = <0>;
|
|
};
|
|
|
|
&sata {
|
|
clocks = <&sysclk5_ck>, <&sata_refclk>;
|
|
};
|