![Luis de Bethencourt](/assets/img/avatar_default.png)
bool Reval is set to match the value of bHalfWirelessN24GMode just to this. The value can be returned directly. Removing uneeded bool. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Franks Klaver <fransklaver@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4910 lines
138 KiB
C
4910 lines
138 KiB
C
/******************************************************************************
|
|
* Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
|
|
* Linux device driver for RTL8192U
|
|
*
|
|
* Based on the r8187 driver, which is:
|
|
* Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* Jerry chuang <wlanfae@realtek.com>
|
|
*/
|
|
|
|
#ifndef CONFIG_FORCE_HARD_FLOAT
|
|
double __floatsidf(int i)
|
|
{
|
|
return i;
|
|
}
|
|
|
|
unsigned int __fixunsdfsi(double d)
|
|
{
|
|
return d;
|
|
}
|
|
|
|
double __adddf3(double a, double b)
|
|
{
|
|
return a+b;
|
|
}
|
|
|
|
double __addsf3(float a, float b)
|
|
{
|
|
return a+b;
|
|
}
|
|
|
|
double __subdf3(double a, double b)
|
|
{
|
|
return a-b;
|
|
}
|
|
|
|
double __extendsfdf2(float a)
|
|
{
|
|
return a;
|
|
}
|
|
#endif
|
|
|
|
#define CONFIG_RTL8192_IO_MAP
|
|
|
|
#include <asm/uaccess.h>
|
|
#include "r8192U_hw.h"
|
|
#include "r8192U.h"
|
|
#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */
|
|
#include "r8180_93cx6.h" /* Card EEPROM */
|
|
#include "r8192U_wx.h"
|
|
#include "r819xU_phy.h" //added by WB 4.30.2008
|
|
#include "r819xU_phyreg.h"
|
|
#include "r819xU_cmdpkt.h"
|
|
#include "r8192U_dm.h"
|
|
#include <linux/usb.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/seq_file.h>
|
|
// FIXME: check if 2.6.7 is ok
|
|
|
|
#include "dot11d.h"
|
|
//set here to open your trace code. //WB
|
|
u32 rt_global_debug_component = COMP_DOWN |
|
|
COMP_SEC |
|
|
COMP_ERR; //always open err flags on
|
|
|
|
#define TOTAL_CAM_ENTRY 32
|
|
#define CAM_CONTENT_COUNT 8
|
|
|
|
static const struct usb_device_id rtl8192_usb_id_tbl[] = {
|
|
/* Realtek */
|
|
{USB_DEVICE(0x0bda, 0x8709)},
|
|
/* Corega */
|
|
{USB_DEVICE(0x07aa, 0x0043)},
|
|
/* Belkin */
|
|
{USB_DEVICE(0x050d, 0x805E)},
|
|
/* Sitecom */
|
|
{USB_DEVICE(0x0df6, 0x0031)},
|
|
/* EnGenius */
|
|
{USB_DEVICE(0x1740, 0x9201)},
|
|
/* Dlink */
|
|
{USB_DEVICE(0x2001, 0x3301)},
|
|
/* Zinwell */
|
|
{USB_DEVICE(0x5a57, 0x0290)},
|
|
/* LG */
|
|
{USB_DEVICE(0x043e, 0x7a01)},
|
|
{}
|
|
};
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION("V 1.1");
|
|
MODULE_DEVICE_TABLE(usb, rtl8192_usb_id_tbl);
|
|
MODULE_DESCRIPTION("Linux driver for Realtek RTL8192 USB WiFi cards");
|
|
|
|
static char *ifname = "wlan%d";
|
|
static int hwwep = 1; //default use hw. set 0 to use software security
|
|
static int channels = 0x3fff;
|
|
|
|
|
|
|
|
module_param(ifname, charp, S_IRUGO|S_IWUSR);
|
|
module_param(hwwep, int, S_IRUGO|S_IWUSR);
|
|
module_param(channels, int, S_IRUGO|S_IWUSR);
|
|
|
|
MODULE_PARM_DESC(ifname, " Net interface name, wlan%d=default");
|
|
MODULE_PARM_DESC(hwwep, " Try to use hardware security support. ");
|
|
MODULE_PARM_DESC(channels, " Channel bitmask for specific locales. NYI");
|
|
|
|
static int rtl8192_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id);
|
|
static void rtl8192_usb_disconnect(struct usb_interface *intf);
|
|
|
|
|
|
static struct usb_driver rtl8192_usb_driver = {
|
|
.name = RTL819xU_MODULE_NAME, /* Driver name */
|
|
.id_table = rtl8192_usb_id_tbl, /* PCI_ID table */
|
|
.probe = rtl8192_usb_probe, /* probe fn */
|
|
.disconnect = rtl8192_usb_disconnect, /* remove fn */
|
|
.suspend = NULL, /* PM suspend fn */
|
|
.resume = NULL, /* PM resume fn */
|
|
};
|
|
|
|
|
|
struct CHANNEL_LIST {
|
|
u8 Channel[32];
|
|
u8 Len;
|
|
};
|
|
|
|
static struct CHANNEL_LIST ChannelPlan[] = {
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165}, 24}, //FCC
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 11}, //IC
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21}, //ETSI
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, //Spain. Change to ETSI.
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, //France. Change to ETSI.
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, //MKK //MKK
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22},//MKK1
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}, //Israel.
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, // For 11a , TELEC
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22}, //MIC
|
|
{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14} //For Global Domain. 1-11:active scan, 12-14 passive scan. //+YJ, 080626
|
|
};
|
|
|
|
static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv)
|
|
{
|
|
int i, max_chan = -1, min_chan = -1;
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
switch (channel_plan) {
|
|
case COUNTRY_CODE_FCC:
|
|
case COUNTRY_CODE_IC:
|
|
case COUNTRY_CODE_ETSI:
|
|
case COUNTRY_CODE_SPAIN:
|
|
case COUNTRY_CODE_FRANCE:
|
|
case COUNTRY_CODE_MKK:
|
|
case COUNTRY_CODE_MKK1:
|
|
case COUNTRY_CODE_ISRAEL:
|
|
case COUNTRY_CODE_TELEC:
|
|
case COUNTRY_CODE_MIC:
|
|
Dot11d_Init(ieee);
|
|
ieee->bGlobalDomain = false;
|
|
//actually 8225 & 8256 rf chips only support B,G,24N mode
|
|
if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256)) {
|
|
min_chan = 1;
|
|
max_chan = 14;
|
|
} else {
|
|
RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __func__);
|
|
}
|
|
if (ChannelPlan[channel_plan].Len != 0) {
|
|
// Clear old channel map
|
|
memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map));
|
|
// Set new channel map
|
|
for (i = 0; i < ChannelPlan[channel_plan].Len; i++) {
|
|
if (ChannelPlan[channel_plan].Channel[i] < min_chan || ChannelPlan[channel_plan].Channel[i] > max_chan)
|
|
break;
|
|
GET_DOT11D_INFO(ieee)->channel_map[ChannelPlan[channel_plan].Channel[i]] = 1;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case COUNTRY_CODE_GLOBAL_DOMAIN:
|
|
GET_DOT11D_INFO(ieee)->bEnabled = 0;//this flag enabled to follow 11d country IE setting, otherwise, it shall follow global domain settings.
|
|
Dot11d_Reset(ieee);
|
|
ieee->bGlobalDomain = true;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
static void CamResetAllEntry(struct net_device *dev)
|
|
{
|
|
u32 ulcommand = 0;
|
|
//2004/02/11 In static WEP, OID_ADD_KEY or OID_ADD_WEP are set before STA associate to AP.
|
|
// However, ResetKey is called on OID_802_11_INFRASTRUCTURE_MODE and MlmeAssociateRequest
|
|
// In this condition, Cam can not be reset because upper layer will not set this static key again.
|
|
ulcommand |= BIT31|BIT30;
|
|
write_nic_dword(dev, RWCAM, ulcommand);
|
|
|
|
}
|
|
|
|
|
|
void write_cam(struct net_device *dev, u8 addr, u32 data)
|
|
{
|
|
write_nic_dword(dev, WCAMI, data);
|
|
write_nic_dword(dev, RWCAM, BIT31|BIT16|(addr&0xff));
|
|
}
|
|
|
|
u32 read_cam(struct net_device *dev, u8 addr)
|
|
{
|
|
u32 data;
|
|
|
|
write_nic_dword(dev, RWCAM, 0x80000000|(addr&0xff));
|
|
read_nic_dword(dev, 0xa8, &data);
|
|
return data;
|
|
}
|
|
|
|
void write_nic_byte_E(struct net_device *dev, int indx, u8 data)
|
|
{
|
|
int status;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
|
|
indx|0xfe00, 0, &data, 1, HZ / 2);
|
|
|
|
if (status < 0)
|
|
netdev_err(dev, "write_nic_byte_E TimeOut! status: %d\n", status);
|
|
}
|
|
|
|
int read_nic_byte_E(struct net_device *dev, int indx, u8 *data)
|
|
{
|
|
int status;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
|
|
indx|0xfe00, 0, data, 1, HZ / 2);
|
|
|
|
if (status < 0) {
|
|
netdev_err(dev, "%s failure status: %d\n", __func__, status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
//as 92U has extend page from 4 to 16, so modify functions below.
|
|
void write_nic_byte(struct net_device *dev, int indx, u8 data)
|
|
{
|
|
int status;
|
|
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
|
|
(indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 1, HZ / 2);
|
|
|
|
if (status < 0)
|
|
netdev_err(dev, "write_nic_byte TimeOut! status: %d\n", status);
|
|
|
|
|
|
}
|
|
|
|
|
|
void write_nic_word(struct net_device *dev, int indx, u16 data)
|
|
{
|
|
|
|
int status;
|
|
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
|
|
(indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
|
|
|
|
if (status < 0)
|
|
netdev_err(dev, "write_nic_word TimeOut! status: %d\n", status);
|
|
|
|
}
|
|
|
|
|
|
void write_nic_dword(struct net_device *dev, int indx, u32 data)
|
|
{
|
|
|
|
int status;
|
|
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
|
|
(indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
|
|
|
|
|
|
if (status < 0)
|
|
netdev_err(dev, "write_nic_dword TimeOut! status: %d\n", status);
|
|
|
|
}
|
|
|
|
|
|
|
|
int read_nic_byte(struct net_device *dev, int indx, u8 *data)
|
|
{
|
|
int status;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
|
|
(indx&0xff)|0xff00, (indx>>8)&0x0f, data, 1, HZ / 2);
|
|
|
|
if (status < 0) {
|
|
netdev_err(dev, "%s failure status: %d\n", __func__, status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
int read_nic_word(struct net_device *dev, int indx, u16 *data)
|
|
{
|
|
int status;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
|
|
(indx&0xff)|0xff00, (indx>>8)&0x0f,
|
|
data, 2, HZ / 2);
|
|
|
|
if (status < 0) {
|
|
netdev_err(dev, "%s failure status: %d\n", __func__, status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int read_nic_word_E(struct net_device *dev, int indx, u16 *data)
|
|
{
|
|
int status;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
|
|
indx|0xfe00, 0, data, 2, HZ / 2);
|
|
|
|
if (status < 0) {
|
|
netdev_err(dev, "%s failure status: %d\n", __func__, status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int read_nic_dword(struct net_device *dev, int indx, u32 *data)
|
|
{
|
|
int status;
|
|
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct usb_device *udev = priv->udev;
|
|
|
|
status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
|
|
(indx&0xff)|0xff00, (indx>>8)&0x0f,
|
|
data, 4, HZ / 2);
|
|
|
|
if (status < 0) {
|
|
netdev_err(dev, "%s failure status: %d\n", __func__, status);
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* u8 read_phy_cck(struct net_device *dev, u8 adr); */
|
|
/* u8 read_phy_ofdm(struct net_device *dev, u8 adr); */
|
|
/* this might still called in what was the PHY rtl8185/rtl8192 common code
|
|
* plans are to possibility turn it again in one common code...
|
|
*/
|
|
inline void force_pci_posting(struct net_device *dev)
|
|
{
|
|
}
|
|
|
|
static struct net_device_stats *rtl8192_stats(struct net_device *dev);
|
|
static void rtl8192_restart(struct work_struct *work);
|
|
static void watch_dog_timer_callback(unsigned long data);
|
|
|
|
/****************************************************************************
|
|
* -----------------------------PROCFS STUFF-------------------------
|
|
*****************************************************************************
|
|
*/
|
|
|
|
static struct proc_dir_entry *rtl8192_proc;
|
|
|
|
static int proc_get_stats_ap(struct seq_file *m, void *v)
|
|
{
|
|
struct net_device *dev = m->private;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
struct ieee80211_network *target;
|
|
|
|
list_for_each_entry(target, &ieee->network_list, list) {
|
|
const char *wpa = "non_WPA";
|
|
if (target->wpa_ie_len > 0 || target->rsn_ie_len > 0)
|
|
wpa = "WPA";
|
|
|
|
seq_printf(m, "%s %s\n", target->ssid, wpa);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int proc_get_registers(struct seq_file *m, void *v)
|
|
{
|
|
struct net_device *dev = m->private;
|
|
int i, n, max = 0xff;
|
|
u8 byte_rd;
|
|
|
|
seq_puts(m, "\n####################page 0##################\n ");
|
|
|
|
for (n = 0; n <= max;) {
|
|
seq_printf(m, "\nD: %2x > ", n);
|
|
|
|
for (i = 0; i < 16 && n <= max; i++, n++) {
|
|
read_nic_byte(dev, 0x000|n, &byte_rd);
|
|
seq_printf(m, "%2x ", byte_rd);
|
|
}
|
|
}
|
|
|
|
seq_puts(m, "\n####################page 1##################\n ");
|
|
for (n = 0; n <= max;) {
|
|
seq_printf(m, "\nD: %2x > ", n);
|
|
|
|
for (i = 0; i < 16 && n <= max; i++, n++) {
|
|
read_nic_byte(dev, 0x100|n, &byte_rd);
|
|
seq_printf(m, "%2x ", byte_rd);
|
|
}
|
|
}
|
|
|
|
seq_puts(m, "\n####################page 3##################\n ");
|
|
for (n = 0; n <= max;) {
|
|
seq_printf(m, "\nD: %2x > ", n);
|
|
|
|
for (i = 0; i < 16 && n <= max; i++, n++) {
|
|
read_nic_byte(dev, 0x300|n, &byte_rd);
|
|
seq_printf(m, "%2x ", byte_rd);
|
|
}
|
|
}
|
|
|
|
seq_putc(m, '\n');
|
|
return 0;
|
|
}
|
|
|
|
static int proc_get_stats_tx(struct seq_file *m, void *v)
|
|
{
|
|
struct net_device *dev = m->private;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
|
|
seq_printf(m,
|
|
"TX VI priority ok int: %lu\n"
|
|
"TX VI priority error int: %lu\n"
|
|
"TX VO priority ok int: %lu\n"
|
|
"TX VO priority error int: %lu\n"
|
|
"TX BE priority ok int: %lu\n"
|
|
"TX BE priority error int: %lu\n"
|
|
"TX BK priority ok int: %lu\n"
|
|
"TX BK priority error int: %lu\n"
|
|
"TX MANAGE priority ok int: %lu\n"
|
|
"TX MANAGE priority error int: %lu\n"
|
|
"TX BEACON priority ok int: %lu\n"
|
|
"TX BEACON priority error int: %lu\n"
|
|
"TX queue resume: %lu\n"
|
|
"TX queue stopped?: %d\n"
|
|
"TX fifo overflow: %lu\n"
|
|
"TX VI queue: %d\n"
|
|
"TX VO queue: %d\n"
|
|
"TX BE queue: %d\n"
|
|
"TX BK queue: %d\n"
|
|
"TX VI dropped: %lu\n"
|
|
"TX VO dropped: %lu\n"
|
|
"TX BE dropped: %lu\n"
|
|
"TX BK dropped: %lu\n"
|
|
"TX total data packets %lu\n",
|
|
priv->stats.txviokint,
|
|
priv->stats.txvierr,
|
|
priv->stats.txvookint,
|
|
priv->stats.txvoerr,
|
|
priv->stats.txbeokint,
|
|
priv->stats.txbeerr,
|
|
priv->stats.txbkokint,
|
|
priv->stats.txbkerr,
|
|
priv->stats.txmanageokint,
|
|
priv->stats.txmanageerr,
|
|
priv->stats.txbeaconokint,
|
|
priv->stats.txbeaconerr,
|
|
priv->stats.txresumed,
|
|
netif_queue_stopped(dev),
|
|
priv->stats.txoverflow,
|
|
atomic_read(&(priv->tx_pending[VI_PRIORITY])),
|
|
atomic_read(&(priv->tx_pending[VO_PRIORITY])),
|
|
atomic_read(&(priv->tx_pending[BE_PRIORITY])),
|
|
atomic_read(&(priv->tx_pending[BK_PRIORITY])),
|
|
priv->stats.txvidrop,
|
|
priv->stats.txvodrop,
|
|
priv->stats.txbedrop,
|
|
priv->stats.txbkdrop,
|
|
priv->stats.txdatapkt
|
|
);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int proc_get_stats_rx(struct seq_file *m, void *v)
|
|
{
|
|
struct net_device *dev = m->private;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
|
|
seq_printf(m,
|
|
"RX packets: %lu\n"
|
|
"RX urb status error: %lu\n"
|
|
"RX invalid urb error: %lu\n",
|
|
priv->stats.rxoktotal,
|
|
priv->stats.rxstaterr,
|
|
priv->stats.rxurberr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rtl8192_proc_module_init(void)
|
|
{
|
|
RT_TRACE(COMP_INIT, "Initializing proc filesystem");
|
|
rtl8192_proc = proc_mkdir(RTL819xU_MODULE_NAME, init_net.proc_net);
|
|
}
|
|
|
|
/*
|
|
* seq_file wrappers for procfile show routines.
|
|
*/
|
|
static int rtl8192_proc_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct net_device *dev = proc_get_parent_data(inode);
|
|
int (*show)(struct seq_file *, void *) = PDE_DATA(inode);
|
|
|
|
return single_open(file, show, dev);
|
|
}
|
|
|
|
static const struct file_operations rtl8192_proc_fops = {
|
|
.open = rtl8192_proc_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/*
|
|
* Table of proc files we need to create.
|
|
*/
|
|
struct rtl8192_proc_file {
|
|
char name[12];
|
|
int (*show)(struct seq_file *, void *);
|
|
};
|
|
|
|
static const struct rtl8192_proc_file rtl8192_proc_files[] = {
|
|
{ "stats-rx", &proc_get_stats_rx },
|
|
{ "stats-tx", &proc_get_stats_tx },
|
|
{ "stats-ap", &proc_get_stats_ap },
|
|
{ "registers", &proc_get_registers },
|
|
{ "" }
|
|
};
|
|
|
|
static void rtl8192_proc_init_one(struct net_device *dev)
|
|
{
|
|
const struct rtl8192_proc_file *f;
|
|
struct proc_dir_entry *dir;
|
|
|
|
if (rtl8192_proc) {
|
|
dir = proc_mkdir_data(dev->name, 0, rtl8192_proc, dev);
|
|
if (!dir) {
|
|
RT_TRACE(COMP_ERR, "Unable to initialize /proc/net/rtl8192/%s\n",
|
|
dev->name);
|
|
return;
|
|
}
|
|
|
|
for (f = rtl8192_proc_files; f->name[0]; f++) {
|
|
if (!proc_create_data(f->name, S_IFREG | S_IRUGO, dir,
|
|
&rtl8192_proc_fops, f->show)) {
|
|
RT_TRACE(COMP_ERR, "Unable to initialize "
|
|
"/proc/net/rtl8192/%s/%s\n",
|
|
dev->name, f->name);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void rtl8192_proc_remove_one(struct net_device *dev)
|
|
{
|
|
remove_proc_subtree(dev->name, rtl8192_proc);
|
|
}
|
|
|
|
/****************************************************************************
|
|
-----------------------------MISC STUFF-------------------------
|
|
*****************************************************************************/
|
|
|
|
short check_nic_enough_desc(struct net_device *dev, int queue_index)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int used = atomic_read(&priv->tx_pending[queue_index]);
|
|
|
|
return (used < MAX_TX_URB);
|
|
}
|
|
|
|
static void tx_timeout(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
schedule_work(&priv->reset_wq);
|
|
}
|
|
|
|
void rtl8192_update_msr(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 msr;
|
|
|
|
read_nic_byte(dev, MSR, &msr);
|
|
msr &= ~MSR_LINK_MASK;
|
|
|
|
/* do not change in link_state != WLAN_LINK_ASSOCIATED.
|
|
* msr must be updated if the state is ASSOCIATING.
|
|
* this is intentional and make sense for ad-hoc and
|
|
* master (see the create BSS/IBSS func)
|
|
*/
|
|
if (priv->ieee80211->state == IEEE80211_LINKED) {
|
|
|
|
if (priv->ieee80211->iw_mode == IW_MODE_INFRA)
|
|
msr |= (MSR_LINK_MANAGED<<MSR_LINK_SHIFT);
|
|
else if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
|
|
msr |= (MSR_LINK_ADHOC<<MSR_LINK_SHIFT);
|
|
else if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
|
|
msr |= (MSR_LINK_MASTER<<MSR_LINK_SHIFT);
|
|
|
|
} else {
|
|
msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
|
|
}
|
|
|
|
write_nic_byte(dev, MSR, msr);
|
|
}
|
|
|
|
void rtl8192_set_chan(struct net_device *dev, short ch)
|
|
{
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __func__, ch);
|
|
priv->chan = ch;
|
|
|
|
/* this hack should avoid frame TX during channel setting*/
|
|
|
|
//need to implement rf set channel here WB
|
|
|
|
if (priv->rf_set_chan)
|
|
priv->rf_set_chan(dev, priv->chan);
|
|
mdelay(10);
|
|
}
|
|
|
|
static void rtl8192_rx_isr(struct urb *urb);
|
|
|
|
static u32 get_rxpacket_shiftbytes_819xusb(struct ieee80211_rx_stats *pstats)
|
|
{
|
|
|
|
return (sizeof(rx_desc_819x_usb) + pstats->RxDrvInfoSize
|
|
+ pstats->RxBufShift);
|
|
|
|
}
|
|
static int rtl8192_rx_initiate(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct urb *entry;
|
|
struct sk_buff *skb;
|
|
struct rtl8192_rx_info *info;
|
|
|
|
/* nomal packet rx procedure */
|
|
while (skb_queue_len(&priv->rx_queue) < MAX_RX_URB) {
|
|
skb = __dev_alloc_skb(RX_URB_SIZE, GFP_KERNEL);
|
|
if (!skb)
|
|
break;
|
|
entry = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!entry) {
|
|
kfree_skb(skb);
|
|
break;
|
|
}
|
|
usb_fill_bulk_urb(entry, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, 3), skb_tail_pointer(skb),
|
|
RX_URB_SIZE, rtl8192_rx_isr, skb);
|
|
info = (struct rtl8192_rx_info *) skb->cb;
|
|
info->urb = entry;
|
|
info->dev = dev;
|
|
info->out_pipe = 3; //denote rx normal packet queue
|
|
skb_queue_tail(&priv->rx_queue, skb);
|
|
usb_submit_urb(entry, GFP_KERNEL);
|
|
}
|
|
|
|
/* command packet rx procedure */
|
|
while (skb_queue_len(&priv->rx_queue) < MAX_RX_URB + 3) {
|
|
skb = __dev_alloc_skb(RX_URB_SIZE, GFP_KERNEL);
|
|
if (!skb)
|
|
break;
|
|
entry = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!entry) {
|
|
kfree_skb(skb);
|
|
break;
|
|
}
|
|
usb_fill_bulk_urb(entry, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, 9), skb_tail_pointer(skb),
|
|
RX_URB_SIZE, rtl8192_rx_isr, skb);
|
|
info = (struct rtl8192_rx_info *) skb->cb;
|
|
info->urb = entry;
|
|
info->dev = dev;
|
|
info->out_pipe = 9; //denote rx cmd packet queue
|
|
skb_queue_tail(&priv->rx_queue, skb);
|
|
usb_submit_urb(entry, GFP_KERNEL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void rtl8192_set_rxconf(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
u32 rxconf;
|
|
|
|
read_nic_dword(dev, RCR, &rxconf);
|
|
rxconf = rxconf & ~MAC_FILTER_MASK;
|
|
rxconf = rxconf | RCR_AMF;
|
|
rxconf = rxconf | RCR_ADF;
|
|
rxconf = rxconf | RCR_AB;
|
|
rxconf = rxconf | RCR_AM;
|
|
|
|
if (dev->flags & IFF_PROMISC)
|
|
DMESG("NIC in promisc mode");
|
|
|
|
if (priv->ieee80211->iw_mode == IW_MODE_MONITOR ||
|
|
dev->flags & IFF_PROMISC) {
|
|
rxconf = rxconf | RCR_AAP;
|
|
} else {
|
|
rxconf = rxconf | RCR_APM;
|
|
rxconf = rxconf | RCR_CBSSID;
|
|
}
|
|
|
|
|
|
if (priv->ieee80211->iw_mode == IW_MODE_MONITOR) {
|
|
rxconf = rxconf | RCR_AICV;
|
|
rxconf = rxconf | RCR_APWRMGT;
|
|
}
|
|
|
|
if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
|
|
rxconf = rxconf | RCR_ACRC32;
|
|
|
|
|
|
rxconf = rxconf & ~RX_FIFO_THRESHOLD_MASK;
|
|
rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE<<RX_FIFO_THRESHOLD_SHIFT);
|
|
rxconf = rxconf & ~MAX_RX_DMA_MASK;
|
|
rxconf = rxconf | ((u32)7<<RCR_MXDMA_OFFSET);
|
|
|
|
rxconf = rxconf | RCR_ONLYERLPKT;
|
|
|
|
write_nic_dword(dev, RCR, rxconf);
|
|
}
|
|
//wait to be removed
|
|
void rtl8192_rx_enable(struct net_device *dev)
|
|
{
|
|
rtl8192_rx_initiate(dev);
|
|
}
|
|
|
|
|
|
void rtl8192_tx_enable(struct net_device *dev)
|
|
{
|
|
}
|
|
|
|
|
|
|
|
void rtl8192_rtx_disable(struct net_device *dev)
|
|
{
|
|
u8 cmd;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
struct sk_buff *skb;
|
|
struct rtl8192_rx_info *info;
|
|
|
|
read_nic_byte(dev, CMDR, &cmd);
|
|
write_nic_byte(dev, CMDR, cmd & ~(CR_TE|CR_RE));
|
|
force_pci_posting(dev);
|
|
mdelay(10);
|
|
|
|
while ((skb = __skb_dequeue(&priv->rx_queue))) {
|
|
info = (struct rtl8192_rx_info *) skb->cb;
|
|
if (!info->urb)
|
|
continue;
|
|
|
|
usb_kill_urb(info->urb);
|
|
kfree_skb(skb);
|
|
}
|
|
|
|
if (skb_queue_len(&priv->skb_queue))
|
|
netdev_warn(dev, "skb_queue not empty\n");
|
|
|
|
skb_queue_purge(&priv->skb_queue);
|
|
}
|
|
|
|
inline u16 ieeerate2rtlrate(int rate)
|
|
{
|
|
switch (rate) {
|
|
case 10:
|
|
return 0;
|
|
case 20:
|
|
return 1;
|
|
case 55:
|
|
return 2;
|
|
case 110:
|
|
return 3;
|
|
case 60:
|
|
return 4;
|
|
case 90:
|
|
return 5;
|
|
case 120:
|
|
return 6;
|
|
case 180:
|
|
return 7;
|
|
case 240:
|
|
return 8;
|
|
case 360:
|
|
return 9;
|
|
case 480:
|
|
return 10;
|
|
case 540:
|
|
return 11;
|
|
default:
|
|
return 3;
|
|
|
|
}
|
|
}
|
|
static u16 rtl_rate[] = {10, 20, 55, 110, 60, 90, 120, 180, 240, 360, 480, 540};
|
|
inline u16 rtl8192_rate2rate(short rate)
|
|
{
|
|
if (rate > 11)
|
|
return 0;
|
|
return rtl_rate[rate];
|
|
}
|
|
|
|
|
|
/* The prototype of rx_isr has changed since one version of Linux Kernel */
|
|
static void rtl8192_rx_isr(struct urb *urb)
|
|
{
|
|
struct sk_buff *skb = (struct sk_buff *) urb->context;
|
|
struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
|
|
struct net_device *dev = info->dev;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int out_pipe = info->out_pipe;
|
|
int err;
|
|
if (!priv->up)
|
|
return;
|
|
if (unlikely(urb->status)) {
|
|
info->urb = NULL;
|
|
priv->stats.rxstaterr++;
|
|
priv->ieee80211->stats.rx_errors++;
|
|
usb_free_urb(urb);
|
|
return;
|
|
}
|
|
skb_unlink(skb, &priv->rx_queue);
|
|
skb_put(skb, urb->actual_length);
|
|
|
|
skb_queue_tail(&priv->skb_queue, skb);
|
|
tasklet_schedule(&priv->irq_rx_tasklet);
|
|
|
|
skb = dev_alloc_skb(RX_URB_SIZE);
|
|
if (unlikely(!skb)) {
|
|
usb_free_urb(urb);
|
|
netdev_err(dev, "%s(): can't alloc skb\n", __func__);
|
|
/* TODO check rx queue length and refill *somewhere* */
|
|
return;
|
|
}
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, out_pipe), skb_tail_pointer(skb),
|
|
RX_URB_SIZE, rtl8192_rx_isr, skb);
|
|
|
|
info = (struct rtl8192_rx_info *) skb->cb;
|
|
info->urb = urb;
|
|
info->dev = dev;
|
|
info->out_pipe = out_pipe;
|
|
|
|
urb->transfer_buffer = skb_tail_pointer(skb);
|
|
urb->context = skb;
|
|
skb_queue_tail(&priv->rx_queue, skb);
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err && err != EPERM)
|
|
netdev_err(dev, "can not submit rxurb, err is %x, URB status is %x\n", err, urb->status);
|
|
}
|
|
|
|
static u32 rtl819xusb_rx_command_packet(struct net_device *dev,
|
|
struct ieee80211_rx_stats *pstats)
|
|
{
|
|
u32 status;
|
|
|
|
status = cmpk_message_handle_rx(dev, pstats);
|
|
if (status)
|
|
DMESG("rxcommandpackethandle819xusb: It is a command packet\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
static void rtl8192_data_hard_stop(struct net_device *dev)
|
|
{
|
|
//FIXME !!
|
|
}
|
|
|
|
|
|
static void rtl8192_data_hard_resume(struct net_device *dev)
|
|
{
|
|
// FIXME !!
|
|
}
|
|
|
|
/* this function TX data frames when the ieee80211 stack requires this.
|
|
* It checks also if we need to stop the ieee tx queue, eventually do it
|
|
*/
|
|
static void rtl8192_hard_data_xmit(struct sk_buff *skb, struct net_device *dev, int rate)
|
|
{
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
int ret;
|
|
unsigned long flags;
|
|
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
|
|
u8 queue_index = tcb_desc->queue_index;
|
|
|
|
/* shall not be referred by command packet */
|
|
RTL8192U_ASSERT(queue_index != TXCMD_QUEUE);
|
|
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
|
|
memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
|
|
tcb_desc->bTxEnableFwCalcDur = 1;
|
|
skb_push(skb, priv->ieee80211->tx_headroom);
|
|
ret = rtl8192_tx(dev, skb);
|
|
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
}
|
|
|
|
/* This is a rough attempt to TX a frame
|
|
* This is called by the ieee 80211 stack to TX management frames.
|
|
* If the ring is full packet are dropped (for data frame the queue
|
|
* is stopped before this can happen).
|
|
*/
|
|
static int rtl8192_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
int ret;
|
|
unsigned long flags;
|
|
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
|
|
u8 queue_index = tcb_desc->queue_index;
|
|
|
|
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
|
|
memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
|
|
if (queue_index == TXCMD_QUEUE) {
|
|
skb_push(skb, USB_HWDESC_HEADER_LEN);
|
|
rtl819xU_tx_cmd(dev, skb);
|
|
ret = 1;
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
return ret;
|
|
} else {
|
|
skb_push(skb, priv->ieee80211->tx_headroom);
|
|
ret = rtl8192_tx(dev, skb);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
void rtl8192_try_wake_queue(struct net_device *dev, int pri);
|
|
|
|
static void rtl8192_tx_isr(struct urb *tx_urb)
|
|
{
|
|
struct sk_buff *skb = (struct sk_buff *)tx_urb->context;
|
|
struct net_device *dev = (struct net_device *)(skb->cb);
|
|
struct r8192_priv *priv = NULL;
|
|
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
|
|
u8 queue_index = tcb_desc->queue_index;
|
|
|
|
priv = ieee80211_priv(dev);
|
|
|
|
if (tcb_desc->queue_index != TXCMD_QUEUE) {
|
|
if (tx_urb->status == 0) {
|
|
dev->trans_start = jiffies;
|
|
priv->stats.txoktotal++;
|
|
priv->ieee80211->LinkDetectInfo.NumTxOkInPeriod++;
|
|
priv->stats.txbytesunicast += (skb->len - priv->ieee80211->tx_headroom);
|
|
} else {
|
|
priv->ieee80211->stats.tx_errors++;
|
|
/* TODO */
|
|
}
|
|
}
|
|
|
|
/* free skb and tx_urb */
|
|
if (skb != NULL) {
|
|
dev_kfree_skb_any(skb);
|
|
usb_free_urb(tx_urb);
|
|
atomic_dec(&priv->tx_pending[queue_index]);
|
|
}
|
|
|
|
//
|
|
// Handle HW Beacon:
|
|
// We had transfer our beacon frame to host controller at this moment.
|
|
//
|
|
//
|
|
// Caution:
|
|
// Handling the wait queue of command packets.
|
|
// For Tx command packets, we must not do TCB fragment because it is not handled right now.
|
|
// We must cut the packets to match the size of TX_CMD_PKT before we send it.
|
|
//
|
|
|
|
/* Handle MPDU in wait queue. */
|
|
if (queue_index != BEACON_QUEUE) {
|
|
/* Don't send data frame during scanning.*/
|
|
if ((skb_queue_len(&priv->ieee80211->skb_waitQ[queue_index]) != 0) &&
|
|
(!(priv->ieee80211->queue_stop))) {
|
|
skb = skb_dequeue(&(priv->ieee80211->skb_waitQ[queue_index]));
|
|
if (skb)
|
|
priv->ieee80211->softmac_hard_start_xmit(skb, dev);
|
|
|
|
return; //modified by david to avoid further processing AMSDU
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
static void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
struct ieee80211_network *net;
|
|
u8 i = 0, basic_rate = 0;
|
|
net = &priv->ieee80211->current_network;
|
|
|
|
for (i = 0; i < net->rates_len; i++) {
|
|
basic_rate = net->rates[i]&0x7f;
|
|
switch (basic_rate) {
|
|
case MGN_1M:
|
|
*rate_config |= RRSR_1M;
|
|
break;
|
|
case MGN_2M:
|
|
*rate_config |= RRSR_2M;
|
|
break;
|
|
case MGN_5_5M:
|
|
*rate_config |= RRSR_5_5M;
|
|
break;
|
|
case MGN_11M:
|
|
*rate_config |= RRSR_11M;
|
|
break;
|
|
case MGN_6M:
|
|
*rate_config |= RRSR_6M;
|
|
break;
|
|
case MGN_9M:
|
|
*rate_config |= RRSR_9M;
|
|
break;
|
|
case MGN_12M:
|
|
*rate_config |= RRSR_12M;
|
|
break;
|
|
case MGN_18M:
|
|
*rate_config |= RRSR_18M;
|
|
break;
|
|
case MGN_24M:
|
|
*rate_config |= RRSR_24M;
|
|
break;
|
|
case MGN_36M:
|
|
*rate_config |= RRSR_36M;
|
|
break;
|
|
case MGN_48M:
|
|
*rate_config |= RRSR_48M;
|
|
break;
|
|
case MGN_54M:
|
|
*rate_config |= RRSR_54M;
|
|
break;
|
|
}
|
|
}
|
|
for (i = 0; i < net->rates_ex_len; i++) {
|
|
basic_rate = net->rates_ex[i]&0x7f;
|
|
switch (basic_rate) {
|
|
case MGN_1M:
|
|
*rate_config |= RRSR_1M;
|
|
break;
|
|
case MGN_2M:
|
|
*rate_config |= RRSR_2M;
|
|
break;
|
|
case MGN_5_5M:
|
|
*rate_config |= RRSR_5_5M;
|
|
break;
|
|
case MGN_11M:
|
|
*rate_config |= RRSR_11M;
|
|
break;
|
|
case MGN_6M:
|
|
*rate_config |= RRSR_6M;
|
|
break;
|
|
case MGN_9M:
|
|
*rate_config |= RRSR_9M;
|
|
break;
|
|
case MGN_12M:
|
|
*rate_config |= RRSR_12M;
|
|
break;
|
|
case MGN_18M:
|
|
*rate_config |= RRSR_18M;
|
|
break;
|
|
case MGN_24M:
|
|
*rate_config |= RRSR_24M;
|
|
break;
|
|
case MGN_36M:
|
|
*rate_config |= RRSR_36M;
|
|
break;
|
|
case MGN_48M:
|
|
*rate_config |= RRSR_48M;
|
|
break;
|
|
case MGN_54M:
|
|
*rate_config |= RRSR_54M;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
#define SHORT_SLOT_TIME 9
|
|
#define NON_SHORT_SLOT_TIME 20
|
|
|
|
static void rtl8192_update_cap(struct net_device *dev, u16 cap)
|
|
{
|
|
u32 tmp = 0;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
struct ieee80211_network *net = &priv->ieee80211->current_network;
|
|
priv->short_preamble = cap & WLAN_CAPABILITY_SHORT_PREAMBLE;
|
|
tmp = priv->basic_rate;
|
|
if (priv->short_preamble)
|
|
tmp |= BRSR_AckShortPmb;
|
|
write_nic_dword(dev, RRSR, tmp);
|
|
|
|
if (net->mode & (IEEE_G|IEEE_N_24G)) {
|
|
u8 slot_time = 0;
|
|
if ((cap & WLAN_CAPABILITY_SHORT_SLOT) && (!priv->ieee80211->pHTInfo->bCurrentRT2RTLongSlotTime)) /* short slot time */
|
|
slot_time = SHORT_SLOT_TIME;
|
|
else //long slot time
|
|
slot_time = NON_SHORT_SLOT_TIME;
|
|
priv->slot_time = slot_time;
|
|
write_nic_byte(dev, SLOT_TIME, slot_time);
|
|
}
|
|
|
|
}
|
|
static void rtl8192_net_update(struct net_device *dev)
|
|
{
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
struct ieee80211_network *net;
|
|
u16 BcnTimeCfg = 0, BcnCW = 6, BcnIFS = 0xf;
|
|
u16 rate_config = 0;
|
|
net = &priv->ieee80211->current_network;
|
|
|
|
rtl8192_config_rate(dev, &rate_config);
|
|
priv->basic_rate = rate_config & 0x15f;
|
|
|
|
write_nic_dword(dev, BSSIDR, ((u32 *)net->bssid)[0]);
|
|
write_nic_word(dev, BSSIDR+4, ((u16 *)net->bssid)[2]);
|
|
|
|
rtl8192_update_msr(dev);
|
|
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) {
|
|
write_nic_word(dev, ATIMWND, 2);
|
|
write_nic_word(dev, BCN_DMATIME, 1023);
|
|
write_nic_word(dev, BCN_INTERVAL, net->beacon_interval);
|
|
write_nic_word(dev, BCN_DRV_EARLY_INT, 1);
|
|
write_nic_byte(dev, BCN_ERR_THRESH, 100);
|
|
BcnTimeCfg |= (BcnCW<<BCN_TCFG_CW_SHIFT);
|
|
// TODO: BcnIFS may required to be changed on ASIC
|
|
BcnTimeCfg |= BcnIFS<<BCN_TCFG_IFS;
|
|
|
|
write_nic_word(dev, BCN_TCFG, BcnTimeCfg);
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
//temporary hw beacon is not used any more.
|
|
//open it when necessary
|
|
void rtl819xusb_beacon_tx(struct net_device *dev, u16 tx_rate)
|
|
{
|
|
|
|
}
|
|
inline u8 rtl8192_IsWirelessBMode(u16 rate)
|
|
{
|
|
if (((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220))
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
u16 N_DBPSOfRate(u16 DataRate);
|
|
|
|
|
|
u16 N_DBPSOfRate(u16 DataRate)
|
|
{
|
|
u16 N_DBPS = 24;
|
|
|
|
switch (DataRate) {
|
|
case 60:
|
|
N_DBPS = 24;
|
|
break;
|
|
|
|
case 90:
|
|
N_DBPS = 36;
|
|
break;
|
|
|
|
case 120:
|
|
N_DBPS = 48;
|
|
break;
|
|
|
|
case 180:
|
|
N_DBPS = 72;
|
|
break;
|
|
|
|
case 240:
|
|
N_DBPS = 96;
|
|
break;
|
|
|
|
case 360:
|
|
N_DBPS = 144;
|
|
break;
|
|
|
|
case 480:
|
|
N_DBPS = 192;
|
|
break;
|
|
|
|
case 540:
|
|
N_DBPS = 216;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return N_DBPS;
|
|
}
|
|
|
|
short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int status;
|
|
struct urb *tx_urb;
|
|
unsigned int idx_pipe;
|
|
tx_desc_cmd_819x_usb *pdesc = (tx_desc_cmd_819x_usb *)skb->data;
|
|
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
|
|
u8 queue_index = tcb_desc->queue_index;
|
|
|
|
atomic_inc(&priv->tx_pending[queue_index]);
|
|
tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!tx_urb) {
|
|
dev_kfree_skb(skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(pdesc, 0, USB_HWDESC_HEADER_LEN);
|
|
/* Tx descriptor ought to be set according to the skb->cb */
|
|
pdesc->FirstSeg = 1;//bFirstSeg;
|
|
pdesc->LastSeg = 1;//bLastSeg;
|
|
pdesc->CmdInit = tcb_desc->bCmdOrInit;
|
|
pdesc->TxBufferSize = tcb_desc->txbuf_size;
|
|
pdesc->OWN = 1;
|
|
pdesc->LINIP = tcb_desc->bLastIniPkt;
|
|
|
|
//----------------------------------------------------------------------------
|
|
// Fill up USB_OUT_CONTEXT.
|
|
//----------------------------------------------------------------------------
|
|
idx_pipe = 0x04;
|
|
usb_fill_bulk_urb(tx_urb, priv->udev, usb_sndbulkpipe(priv->udev, idx_pipe),
|
|
skb->data, skb->len, rtl8192_tx_isr, skb);
|
|
|
|
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
|
|
|
|
if (!status) {
|
|
return 0;
|
|
} else {
|
|
DMESGE("Error TX CMD URB, error %d", status);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Mapping Software/Hardware descriptor queue id to "Queue Select Field"
|
|
* in TxFwInfo data structure
|
|
* 2006.10.30 by Emily
|
|
*
|
|
* \param QUEUEID Software Queue
|
|
*/
|
|
static u8 MapHwQueueToFirmwareQueue(u8 QueueID)
|
|
{
|
|
u8 QueueSelect = 0x0; //defualt set to
|
|
|
|
switch (QueueID) {
|
|
case BE_QUEUE:
|
|
QueueSelect = QSLT_BE;
|
|
break;
|
|
|
|
case BK_QUEUE:
|
|
QueueSelect = QSLT_BK;
|
|
break;
|
|
|
|
case VO_QUEUE:
|
|
QueueSelect = QSLT_VO;
|
|
break;
|
|
|
|
case VI_QUEUE:
|
|
QueueSelect = QSLT_VI;
|
|
break;
|
|
case MGNT_QUEUE:
|
|
QueueSelect = QSLT_MGNT;
|
|
break;
|
|
|
|
case BEACON_QUEUE:
|
|
QueueSelect = QSLT_BEACON;
|
|
break;
|
|
|
|
// TODO: 2006.10.30 mark other queue selection until we verify it is OK
|
|
// TODO: Remove Assertions
|
|
case TXCMD_QUEUE:
|
|
QueueSelect = QSLT_CMD;
|
|
break;
|
|
case HIGH_QUEUE:
|
|
QueueSelect = QSLT_HIGH;
|
|
break;
|
|
|
|
default:
|
|
RT_TRACE(COMP_ERR, "TransmitTCB(): Impossible Queue Selection: %d \n", QueueID);
|
|
break;
|
|
}
|
|
return QueueSelect;
|
|
}
|
|
|
|
static u8 MRateToHwRate8190Pci(u8 rate)
|
|
{
|
|
u8 ret = DESC90_RATE1M;
|
|
|
|
switch (rate) {
|
|
case MGN_1M:
|
|
ret = DESC90_RATE1M;
|
|
break;
|
|
case MGN_2M:
|
|
ret = DESC90_RATE2M;
|
|
break;
|
|
case MGN_5_5M:
|
|
ret = DESC90_RATE5_5M;
|
|
break;
|
|
case MGN_11M:
|
|
ret = DESC90_RATE11M;
|
|
break;
|
|
case MGN_6M:
|
|
ret = DESC90_RATE6M;
|
|
break;
|
|
case MGN_9M:
|
|
ret = DESC90_RATE9M;
|
|
break;
|
|
case MGN_12M:
|
|
ret = DESC90_RATE12M;
|
|
break;
|
|
case MGN_18M:
|
|
ret = DESC90_RATE18M;
|
|
break;
|
|
case MGN_24M:
|
|
ret = DESC90_RATE24M;
|
|
break;
|
|
case MGN_36M:
|
|
ret = DESC90_RATE36M;
|
|
break;
|
|
case MGN_48M:
|
|
ret = DESC90_RATE48M;
|
|
break;
|
|
case MGN_54M:
|
|
ret = DESC90_RATE54M;
|
|
break;
|
|
|
|
/* HT rate since here */
|
|
case MGN_MCS0:
|
|
ret = DESC90_RATEMCS0;
|
|
break;
|
|
case MGN_MCS1:
|
|
ret = DESC90_RATEMCS1;
|
|
break;
|
|
case MGN_MCS2:
|
|
ret = DESC90_RATEMCS2;
|
|
break;
|
|
case MGN_MCS3:
|
|
ret = DESC90_RATEMCS3;
|
|
break;
|
|
case MGN_MCS4:
|
|
ret = DESC90_RATEMCS4;
|
|
break;
|
|
case MGN_MCS5:
|
|
ret = DESC90_RATEMCS5;
|
|
break;
|
|
case MGN_MCS6:
|
|
ret = DESC90_RATEMCS6;
|
|
break;
|
|
case MGN_MCS7:
|
|
ret = DESC90_RATEMCS7;
|
|
break;
|
|
case MGN_MCS8:
|
|
ret = DESC90_RATEMCS8;
|
|
break;
|
|
case MGN_MCS9:
|
|
ret = DESC90_RATEMCS9;
|
|
break;
|
|
case MGN_MCS10:
|
|
ret = DESC90_RATEMCS10;
|
|
break;
|
|
case MGN_MCS11:
|
|
ret = DESC90_RATEMCS11;
|
|
break;
|
|
case MGN_MCS12:
|
|
ret = DESC90_RATEMCS12;
|
|
break;
|
|
case MGN_MCS13:
|
|
ret = DESC90_RATEMCS13;
|
|
break;
|
|
case MGN_MCS14:
|
|
ret = DESC90_RATEMCS14;
|
|
break;
|
|
case MGN_MCS15:
|
|
ret = DESC90_RATEMCS15;
|
|
break;
|
|
case (0x80|0x20):
|
|
ret = DESC90_RATEMCS32;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc)
|
|
{
|
|
u8 tmp_Short;
|
|
|
|
tmp_Short = (TxHT == 1) ? ((tcb_desc->bUseShortGI) ? 1 : 0) : ((tcb_desc->bUseShortPreamble) ? 1 : 0);
|
|
|
|
if (TxHT == 1 && TxRate != DESC90_RATEMCS15)
|
|
tmp_Short = 0;
|
|
|
|
return tmp_Short;
|
|
}
|
|
|
|
static void tx_zero_isr(struct urb *tx_urb)
|
|
{
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The tx procedure is just as following,
|
|
* skb->cb will contain all the following information,
|
|
* priority, morefrag, rate, &dev.
|
|
* */
|
|
short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
|
|
tx_desc_819x_usb *tx_desc = (tx_desc_819x_usb *)skb->data;
|
|
tx_fwinfo_819x_usb *tx_fwinfo = (tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN);
|
|
struct usb_device *udev = priv->udev;
|
|
int pend;
|
|
int status;
|
|
struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
|
|
unsigned int idx_pipe;
|
|
pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
|
|
/* we are locked here so the two atomic_read and inc are executed
|
|
* without interleaves
|
|
* !!! For debug purpose
|
|
*/
|
|
if (pend > MAX_TX_URB) {
|
|
netdev_dbg(dev, "To discard skb packet!\n");
|
|
dev_kfree_skb_any(skb);
|
|
return -1;
|
|
}
|
|
|
|
tx_urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!tx_urb) {
|
|
dev_kfree_skb_any(skb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Fill Tx firmware info */
|
|
memset(tx_fwinfo, 0, sizeof(tx_fwinfo_819x_usb));
|
|
/* DWORD 0 */
|
|
tx_fwinfo->TxHT = (tcb_desc->data_rate&0x80) ? 1 : 0;
|
|
tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate);
|
|
tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur;
|
|
tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc);
|
|
if (tcb_desc->bAMPDUEnable) { /* AMPDU enabled */
|
|
tx_fwinfo->AllowAggregation = 1;
|
|
/* DWORD 1 */
|
|
tx_fwinfo->RxMF = tcb_desc->ampdu_factor;
|
|
tx_fwinfo->RxAMD = tcb_desc->ampdu_density&0x07;//ampdudensity
|
|
} else {
|
|
tx_fwinfo->AllowAggregation = 0;
|
|
/* DWORD 1 */
|
|
tx_fwinfo->RxMF = 0;
|
|
tx_fwinfo->RxAMD = 0;
|
|
}
|
|
|
|
/* Protection mode related */
|
|
tx_fwinfo->RtsEnable = (tcb_desc->bRTSEnable) ? 1 : 0;
|
|
tx_fwinfo->CtsEnable = (tcb_desc->bCTSEnable) ? 1 : 0;
|
|
tx_fwinfo->RtsSTBC = (tcb_desc->bRTSSTBC) ? 1 : 0;
|
|
tx_fwinfo->RtsHT = (tcb_desc->rts_rate&0x80) ? 1 : 0;
|
|
tx_fwinfo->RtsRate = MRateToHwRate8190Pci((u8)tcb_desc->rts_rate);
|
|
tx_fwinfo->RtsSubcarrier = (tx_fwinfo->RtsHT == 0) ? (tcb_desc->RTSSC) : 0;
|
|
tx_fwinfo->RtsBandwidth = (tx_fwinfo->RtsHT == 1) ? ((tcb_desc->bRTSBW) ? 1 : 0) : 0;
|
|
tx_fwinfo->RtsShort = (tx_fwinfo->RtsHT == 0) ? (tcb_desc->bRTSUseShortPreamble ? 1 : 0) :
|
|
(tcb_desc->bRTSUseShortGI ? 1 : 0);
|
|
|
|
/* Set Bandwidth and sub-channel settings. */
|
|
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) {
|
|
if (tcb_desc->bPacketBW) {
|
|
tx_fwinfo->TxBandwidth = 1;
|
|
tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode
|
|
} else {
|
|
tx_fwinfo->TxBandwidth = 0;
|
|
tx_fwinfo->TxSubCarrier = priv->nCur40MhzPrimeSC;
|
|
}
|
|
} else {
|
|
tx_fwinfo->TxBandwidth = 0;
|
|
tx_fwinfo->TxSubCarrier = 0;
|
|
}
|
|
|
|
/* Fill Tx descriptor */
|
|
memset(tx_desc, 0, sizeof(tx_desc_819x_usb));
|
|
/* DWORD 0 */
|
|
tx_desc->LINIP = 0;
|
|
tx_desc->CmdInit = 1;
|
|
tx_desc->Offset = sizeof(tx_fwinfo_819x_usb) + 8;
|
|
tx_desc->PktSize = (skb->len - TX_PACKET_SHIFT_BYTES) & 0xffff;
|
|
|
|
/*DWORD 1*/
|
|
tx_desc->SecCAMID = 0;
|
|
tx_desc->RATid = tcb_desc->RATRIndex;
|
|
tx_desc->NoEnc = 1;
|
|
tx_desc->SecType = 0x0;
|
|
if (tcb_desc->bHwSec) {
|
|
switch (priv->ieee80211->pairwise_key_type) {
|
|
case KEY_TYPE_WEP40:
|
|
case KEY_TYPE_WEP104:
|
|
tx_desc->SecType = 0x1;
|
|
tx_desc->NoEnc = 0;
|
|
break;
|
|
case KEY_TYPE_TKIP:
|
|
tx_desc->SecType = 0x2;
|
|
tx_desc->NoEnc = 0;
|
|
break;
|
|
case KEY_TYPE_CCMP:
|
|
tx_desc->SecType = 0x3;
|
|
tx_desc->NoEnc = 0;
|
|
break;
|
|
case KEY_TYPE_NA:
|
|
tx_desc->SecType = 0x0;
|
|
tx_desc->NoEnc = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
tx_desc->QueueSelect = MapHwQueueToFirmwareQueue(tcb_desc->queue_index);
|
|
tx_desc->TxFWInfoSize = sizeof(tx_fwinfo_819x_usb);
|
|
|
|
tx_desc->DISFB = tcb_desc->bTxDisableRateFallBack;
|
|
tx_desc->USERATE = tcb_desc->bTxUseDriverAssingedRate;
|
|
|
|
/* Fill fields that are required to be initialized in all of the descriptors */
|
|
//DWORD 0
|
|
tx_desc->FirstSeg = 1;
|
|
tx_desc->LastSeg = 1;
|
|
tx_desc->OWN = 1;
|
|
|
|
/* DWORD 2 */
|
|
tx_desc->TxBufferSize = (u32)(skb->len - USB_HWDESC_HEADER_LEN);
|
|
idx_pipe = 0x5;
|
|
|
|
/* To submit bulk urb */
|
|
usb_fill_bulk_urb(tx_urb, udev,
|
|
usb_sndbulkpipe(udev, idx_pipe), skb->data,
|
|
skb->len, rtl8192_tx_isr, skb);
|
|
|
|
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
|
|
if (!status) {
|
|
//we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
|
|
bool bSend0Byte = false;
|
|
u8 zero = 0;
|
|
if (udev->speed == USB_SPEED_HIGH) {
|
|
if (skb->len > 0 && skb->len % 512 == 0)
|
|
bSend0Byte = true;
|
|
} else {
|
|
if (skb->len > 0 && skb->len % 64 == 0)
|
|
bSend0Byte = true;
|
|
}
|
|
if (bSend0Byte) {
|
|
tx_urb_zero = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!tx_urb_zero) {
|
|
RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n");
|
|
return -ENOMEM;
|
|
}
|
|
usb_fill_bulk_urb(tx_urb_zero, udev,
|
|
usb_sndbulkpipe(udev, idx_pipe), &zero,
|
|
0, tx_zero_isr, dev);
|
|
status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC);
|
|
if (status) {
|
|
RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
|
|
return -1;
|
|
}
|
|
}
|
|
dev->trans_start = jiffies;
|
|
atomic_inc(&priv->tx_pending[tcb_desc->queue_index]);
|
|
return 0;
|
|
} else {
|
|
RT_TRACE(COMP_ERR, "Error TX URB %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
|
|
status);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static short rtl8192_usb_initendpoints(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
priv->rx_urb = kmalloc(sizeof(struct urb *) * (MAX_RX_URB+1),
|
|
GFP_KERNEL);
|
|
if (priv->rx_urb == NULL)
|
|
return -ENOMEM;
|
|
|
|
#ifndef JACKSON_NEW_RX
|
|
for (i = 0; i < (MAX_RX_URB+1); i++) {
|
|
|
|
priv->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
|
|
|
|
priv->rx_urb[i]->transfer_buffer = kmalloc(RX_URB_SIZE, GFP_KERNEL);
|
|
|
|
priv->rx_urb[i]->transfer_buffer_length = RX_URB_SIZE;
|
|
}
|
|
#endif
|
|
|
|
#ifdef THOMAS_BEACON
|
|
{
|
|
long align = 0;
|
|
void *oldaddr, *newaddr;
|
|
|
|
priv->rx_urb[16] = usb_alloc_urb(0, GFP_KERNEL);
|
|
priv->oldaddr = kmalloc(16, GFP_KERNEL);
|
|
oldaddr = priv->oldaddr;
|
|
align = ((long)oldaddr) & 3;
|
|
if (align) {
|
|
newaddr = oldaddr + 4 - align;
|
|
priv->rx_urb[16]->transfer_buffer_length = 16 - 4 + align;
|
|
} else {
|
|
newaddr = oldaddr;
|
|
priv->rx_urb[16]->transfer_buffer_length = 16;
|
|
}
|
|
priv->rx_urb[16]->transfer_buffer = newaddr;
|
|
}
|
|
#endif
|
|
|
|
memset(priv->rx_urb, 0, sizeof(struct urb *) * MAX_RX_URB);
|
|
priv->pp_rxskb = kcalloc(MAX_RX_URB, sizeof(struct sk_buff *),
|
|
GFP_KERNEL);
|
|
if (!priv->pp_rxskb) {
|
|
kfree(priv->rx_urb);
|
|
|
|
priv->pp_rxskb = NULL;
|
|
priv->rx_urb = NULL;
|
|
|
|
DMESGE("Endpoint Alloc Failure");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
netdev_dbg(dev, "End of initendpoints\n");
|
|
return 0;
|
|
|
|
}
|
|
#ifdef THOMAS_BEACON
|
|
static void rtl8192_usb_deleteendpoints(struct net_device *dev)
|
|
{
|
|
int i;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
if (priv->rx_urb) {
|
|
for (i = 0; i < (MAX_RX_URB+1); i++) {
|
|
usb_kill_urb(priv->rx_urb[i]);
|
|
usb_free_urb(priv->rx_urb[i]);
|
|
}
|
|
kfree(priv->rx_urb);
|
|
priv->rx_urb = NULL;
|
|
}
|
|
kfree(priv->oldaddr);
|
|
priv->oldaddr = NULL;
|
|
if (priv->pp_rxskb) {
|
|
kfree(priv->pp_rxskb);
|
|
priv->pp_rxskb = NULL;
|
|
}
|
|
}
|
|
#else
|
|
void rtl8192_usb_deleteendpoints(struct net_device *dev)
|
|
{
|
|
int i;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
#ifndef JACKSON_NEW_RX
|
|
|
|
if (priv->rx_urb) {
|
|
for (i = 0; i < (MAX_RX_URB+1); i++) {
|
|
usb_kill_urb(priv->rx_urb[i]);
|
|
kfree(priv->rx_urb[i]->transfer_buffer);
|
|
usb_free_urb(priv->rx_urb[i]);
|
|
}
|
|
kfree(priv->rx_urb);
|
|
priv->rx_urb = NULL;
|
|
|
|
}
|
|
#else
|
|
kfree(priv->rx_urb);
|
|
priv->rx_urb = NULL;
|
|
kfree(priv->oldaddr);
|
|
priv->oldaddr = NULL;
|
|
if (priv->pp_rxskb) {
|
|
kfree(priv->pp_rxskb);
|
|
priv->pp_rxskb = 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
static void rtl8192_update_ratr_table(struct net_device *dev);
|
|
static void rtl8192_link_change(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
if (ieee->state == IEEE80211_LINKED) {
|
|
rtl8192_net_update(dev);
|
|
rtl8192_update_ratr_table(dev);
|
|
//add this as in pure N mode, wep encryption will use software way, but there is no chance to set this as wep will not set group key in wext. WB.2008.07.08
|
|
if ((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type))
|
|
EnableHWSecurityConfig8192(dev);
|
|
}
|
|
/*update timing params*/
|
|
if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) {
|
|
u32 reg = 0;
|
|
read_nic_dword(dev, RCR, ®);
|
|
if (priv->ieee80211->state == IEEE80211_LINKED)
|
|
priv->ReceiveConfig = reg |= RCR_CBSSID;
|
|
else
|
|
priv->ReceiveConfig = reg &= ~RCR_CBSSID;
|
|
write_nic_dword(dev, RCR, reg);
|
|
}
|
|
}
|
|
|
|
static struct ieee80211_qos_parameters def_qos_parameters = {
|
|
{cpu_to_le16(3), cpu_to_le16(3), cpu_to_le16(3), cpu_to_le16(3)},
|
|
{cpu_to_le16(7), cpu_to_le16(7), cpu_to_le16(7), cpu_to_le16(7)},
|
|
{2, 2, 2, 2},/* aifs */
|
|
{0, 0, 0, 0},/* flags */
|
|
{0, 0, 0, 0} /* tx_op_limit */
|
|
};
|
|
|
|
|
|
static void rtl8192_update_beacon(struct work_struct *work)
|
|
{
|
|
struct r8192_priv *priv = container_of(work, struct r8192_priv, update_beacon_wq.work);
|
|
struct net_device *dev = priv->ieee80211->dev;
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
struct ieee80211_network *net = &ieee->current_network;
|
|
|
|
if (ieee->pHTInfo->bCurrentHTSupport)
|
|
HTUpdateSelfAndPeerSetting(ieee, net);
|
|
ieee->pHTInfo->bCurrentRT2RTLongSlotTime = net->bssht.bdRT2RTLongSlotTime;
|
|
rtl8192_update_cap(dev, net->capability);
|
|
}
|
|
/*
|
|
* background support to run QoS activate functionality
|
|
*/
|
|
static int WDCAPARA_ADD[] = {EDCAPARA_BE, EDCAPARA_BK, EDCAPARA_VI, EDCAPARA_VO};
|
|
static void rtl8192_qos_activate(struct work_struct *work)
|
|
{
|
|
struct r8192_priv *priv = container_of(work, struct r8192_priv, qos_activate);
|
|
struct net_device *dev = priv->ieee80211->dev;
|
|
struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters;
|
|
u8 mode = priv->ieee80211->current_network.mode;
|
|
u32 u1bAIFS;
|
|
u32 u4bAcParam;
|
|
u32 op_limit;
|
|
u32 cw_max;
|
|
u32 cw_min;
|
|
int i;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
if (priv->ieee80211->state != IEEE80211_LINKED)
|
|
goto success;
|
|
RT_TRACE(COMP_QOS, "qos active process with associate response received\n");
|
|
/* It better set slot time at first */
|
|
/* For we just support b/g mode at present, let the slot time at 9/20 selection */
|
|
/* update the ac parameter to related registers */
|
|
for (i = 0; i < QOS_QUEUE_NUM; i++) {
|
|
//Mode G/A: slotTimeTimer = 9; Mode B: 20
|
|
u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ? 9 : 20) + aSifsTime;
|
|
u1bAIFS <<= AC_PARAM_AIFS_OFFSET;
|
|
op_limit = (u32)le16_to_cpu(qos_parameters->tx_op_limit[i]);
|
|
op_limit <<= AC_PARAM_TXOP_LIMIT_OFFSET;
|
|
cw_max = (u32)le16_to_cpu(qos_parameters->cw_max[i]);
|
|
cw_max <<= AC_PARAM_ECW_MAX_OFFSET;
|
|
cw_min = (u32)le16_to_cpu(qos_parameters->cw_min[i]);
|
|
cw_min <<= AC_PARAM_ECW_MIN_OFFSET;
|
|
u4bAcParam = op_limit | cw_max | cw_min | u1bAIFS;
|
|
write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);
|
|
}
|
|
|
|
success:
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
|
|
int active_network,
|
|
struct ieee80211_network *network)
|
|
{
|
|
int ret = 0;
|
|
u32 size = sizeof(struct ieee80211_qos_parameters);
|
|
|
|
if (priv->ieee80211->state != IEEE80211_LINKED)
|
|
return ret;
|
|
|
|
if ((priv->ieee80211->iw_mode != IW_MODE_INFRA))
|
|
return ret;
|
|
|
|
if (network->flags & NETWORK_HAS_QOS_MASK) {
|
|
if (active_network &&
|
|
(network->flags & NETWORK_HAS_QOS_PARAMETERS))
|
|
network->qos_data.active = network->qos_data.supported;
|
|
|
|
if ((network->qos_data.active == 1) && (active_network == 1) &&
|
|
(network->flags & NETWORK_HAS_QOS_PARAMETERS) &&
|
|
(network->qos_data.old_param_count !=
|
|
network->qos_data.param_count)) {
|
|
network->qos_data.old_param_count =
|
|
network->qos_data.param_count;
|
|
queue_work(priv->priv_wq, &priv->qos_activate);
|
|
RT_TRACE(COMP_QOS, "QoS parameters change call "
|
|
"qos_activate\n");
|
|
}
|
|
} else {
|
|
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
|
|
&def_qos_parameters, size);
|
|
|
|
if ((network->qos_data.active == 1) && (active_network == 1)) {
|
|
queue_work(priv->priv_wq, &priv->qos_activate);
|
|
RT_TRACE(COMP_QOS, "QoS was disabled call qos_activate \n");
|
|
}
|
|
network->qos_data.active = 0;
|
|
network->qos_data.supported = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* handle and manage frame from beacon and probe response */
|
|
static int rtl8192_handle_beacon(struct net_device *dev,
|
|
struct ieee80211_beacon *beacon,
|
|
struct ieee80211_network *network)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
rtl8192_qos_handle_probe_response(priv, 1, network);
|
|
queue_delayed_work(priv->priv_wq, &priv->update_beacon_wq, 0);
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
* handling the beaconing responses. if we get different QoS setting
|
|
* off the network from the associated setting, adjust the QoS
|
|
* setting
|
|
*/
|
|
static int rtl8192_qos_association_resp(struct r8192_priv *priv,
|
|
struct ieee80211_network *network)
|
|
{
|
|
unsigned long flags;
|
|
u32 size = sizeof(struct ieee80211_qos_parameters);
|
|
int set_qos_param = 0;
|
|
|
|
if ((priv == NULL) || (network == NULL))
|
|
return 0;
|
|
|
|
if (priv->ieee80211->state != IEEE80211_LINKED)
|
|
return 0;
|
|
|
|
if ((priv->ieee80211->iw_mode != IW_MODE_INFRA))
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&priv->ieee80211->lock, flags);
|
|
if (network->flags & NETWORK_HAS_QOS_PARAMETERS) {
|
|
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
|
|
&network->qos_data.parameters,
|
|
sizeof(struct ieee80211_qos_parameters));
|
|
priv->ieee80211->current_network.qos_data.active = 1;
|
|
set_qos_param = 1;
|
|
/* update qos parameter for current network */
|
|
priv->ieee80211->current_network.qos_data.old_param_count =
|
|
priv->ieee80211->current_network.qos_data.param_count;
|
|
priv->ieee80211->current_network.qos_data.param_count =
|
|
network->qos_data.param_count;
|
|
} else {
|
|
memcpy(&priv->ieee80211->current_network.qos_data.parameters,
|
|
&def_qos_parameters, size);
|
|
priv->ieee80211->current_network.qos_data.active = 0;
|
|
priv->ieee80211->current_network.qos_data.supported = 0;
|
|
set_qos_param = 1;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->ieee80211->lock, flags);
|
|
|
|
RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n", __func__, network->flags, priv->ieee80211->current_network.qos_data.active);
|
|
if (set_qos_param == 1)
|
|
queue_work(priv->priv_wq, &priv->qos_activate);
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int rtl8192_handle_assoc_response(struct net_device *dev,
|
|
struct ieee80211_assoc_response_frame *resp,
|
|
struct ieee80211_network *network)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
rtl8192_qos_association_resp(priv, network);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void rtl8192_update_ratr_table(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
u8 *pMcsRate = ieee->dot11HTOperationalRateSet;
|
|
u32 ratr_value = 0;
|
|
u8 rate_index = 0;
|
|
rtl8192_config_rate(dev, (u16 *)(&ratr_value));
|
|
ratr_value |= (*(u16 *)(pMcsRate)) << 12;
|
|
switch (ieee->mode) {
|
|
case IEEE_A:
|
|
ratr_value &= 0x00000FF0;
|
|
break;
|
|
case IEEE_B:
|
|
ratr_value &= 0x0000000F;
|
|
break;
|
|
case IEEE_G:
|
|
ratr_value &= 0x00000FF7;
|
|
break;
|
|
case IEEE_N_24G:
|
|
case IEEE_N_5G:
|
|
if (ieee->pHTInfo->PeerMimoPs == 0) { /* MIMO_PS_STATIC */
|
|
ratr_value &= 0x0007F007;
|
|
} else {
|
|
if (priv->rf_type == RF_1T2R)
|
|
ratr_value &= 0x000FF007;
|
|
else
|
|
ratr_value &= 0x0F81F007;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
ratr_value &= 0x0FFFFFFF;
|
|
if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz)
|
|
ratr_value |= 0x80000000;
|
|
else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz)
|
|
ratr_value |= 0x80000000;
|
|
write_nic_dword(dev, RATR0+rate_index*4, ratr_value);
|
|
write_nic_byte(dev, UFWP, 1);
|
|
}
|
|
|
|
static u8 ccmp_ie[4] = {0x00, 0x50, 0xf2, 0x04};
|
|
static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
|
|
static bool GetNmodeSupportBySecCfg8192(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
struct ieee80211_network *network = &ieee->current_network;
|
|
int wpa_ie_len = ieee->wpa_ie_len;
|
|
struct ieee80211_crypt_data *crypt;
|
|
int encrypt;
|
|
|
|
crypt = ieee->crypt[ieee->tx_keyidx];
|
|
//we use connecting AP's capability instead of only security config on our driver to distinguish whether it should use N mode or G mode
|
|
encrypt = (network->capability & WLAN_CAPABILITY_PRIVACY) || (ieee->host_encrypt && crypt && crypt->ops && (0 == strcmp(crypt->ops->name, "WEP")));
|
|
|
|
/* simply judge */
|
|
if (encrypt && (wpa_ie_len == 0)) {
|
|
/* wep encryption, no N mode setting */
|
|
return false;
|
|
} else if ((wpa_ie_len != 0)) {
|
|
/* parse pairwise key type */
|
|
if (((ieee->wpa_ie[0] == 0xdd) && (!memcmp(&(ieee->wpa_ie[14]), ccmp_ie, 4))) || ((ieee->wpa_ie[0] == 0x30) && (!memcmp(&ieee->wpa_ie[10], ccmp_rsn_ie, 4))))
|
|
return true;
|
|
else
|
|
return false;
|
|
} else {
|
|
return true;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
return priv->ieee80211->bHalfWirelessN24GMode;
|
|
}
|
|
|
|
static void rtl8192_refresh_supportrate(struct r8192_priv *priv)
|
|
{
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
//we do not consider set support rate for ABG mode, only HT MCS rate is set here.
|
|
if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
|
|
memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
|
|
else
|
|
memset(ieee->Regdot11HTOperationalRateSet, 0, 16);
|
|
}
|
|
|
|
static u8 rtl8192_getSupportedWireleeMode(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 ret = 0;
|
|
switch (priv->rf_chip) {
|
|
case RF_8225:
|
|
case RF_8256:
|
|
case RF_PSEUDO_11N:
|
|
ret = WIRELESS_MODE_N_24G|WIRELESS_MODE_G|WIRELESS_MODE_B;
|
|
break;
|
|
case RF_8258:
|
|
ret = WIRELESS_MODE_A|WIRELESS_MODE_N_5G;
|
|
break;
|
|
default:
|
|
ret = WIRELESS_MODE_B;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
static void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 bSupportMode = rtl8192_getSupportedWireleeMode(dev);
|
|
|
|
if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode) == 0)) {
|
|
if (bSupportMode & WIRELESS_MODE_N_24G) {
|
|
wireless_mode = WIRELESS_MODE_N_24G;
|
|
} else if (bSupportMode & WIRELESS_MODE_N_5G) {
|
|
wireless_mode = WIRELESS_MODE_N_5G;
|
|
} else if ((bSupportMode & WIRELESS_MODE_A)) {
|
|
wireless_mode = WIRELESS_MODE_A;
|
|
} else if ((bSupportMode & WIRELESS_MODE_G)) {
|
|
wireless_mode = WIRELESS_MODE_G;
|
|
} else if ((bSupportMode & WIRELESS_MODE_B)) {
|
|
wireless_mode = WIRELESS_MODE_B;
|
|
} else {
|
|
RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __func__, bSupportMode);
|
|
wireless_mode = WIRELESS_MODE_B;
|
|
}
|
|
}
|
|
#ifdef TO_DO_LIST //// TODO: this function doesn't work well at this time, we should wait for FPGA
|
|
ActUpdateChannelAccessSetting(pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting);
|
|
#endif
|
|
priv->ieee80211->mode = wireless_mode;
|
|
|
|
if ((wireless_mode == WIRELESS_MODE_N_24G) || (wireless_mode == WIRELESS_MODE_N_5G))
|
|
priv->ieee80211->pHTInfo->bEnableHT = 1;
|
|
else
|
|
priv->ieee80211->pHTInfo->bEnableHT = 0;
|
|
RT_TRACE(COMP_INIT, "Current Wireless Mode is %x\n", wireless_mode);
|
|
rtl8192_refresh_supportrate(priv);
|
|
|
|
}
|
|
//init priv variables here. only non_zero value should be initialized here.
|
|
static void rtl8192_init_priv_variable(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 i;
|
|
priv->card_8192 = NIC_8192U;
|
|
priv->chan = 1; //set to channel 1
|
|
priv->ieee80211->mode = WIRELESS_MODE_AUTO; //SET AUTO
|
|
priv->ieee80211->iw_mode = IW_MODE_INFRA;
|
|
priv->ieee80211->ieee_up = 0;
|
|
priv->retry_rts = DEFAULT_RETRY_RTS;
|
|
priv->retry_data = DEFAULT_RETRY_DATA;
|
|
priv->ieee80211->rts = DEFAULT_RTS_THRESHOLD;
|
|
priv->ieee80211->rate = 110; //11 mbps
|
|
priv->ieee80211->short_slot = 1;
|
|
priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
|
|
priv->CckPwEnl = 6;
|
|
//for silent reset
|
|
priv->IrpPendingCount = 1;
|
|
priv->ResetProgress = RESET_TYPE_NORESET;
|
|
priv->bForcedSilentReset = false;
|
|
priv->bDisableNormalResetCheck = false;
|
|
priv->force_reset = false;
|
|
|
|
priv->ieee80211->FwRWRF = 0; //we don't use FW read/write RF until stable firmware is available.
|
|
priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL;
|
|
priv->ieee80211->softmac_features = IEEE_SOFTMAC_SCAN |
|
|
IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ |
|
|
IEEE_SOFTMAC_PROBERS | IEEE_SOFTMAC_TX_QUEUE |
|
|
IEEE_SOFTMAC_BEACONS;//added by amy 080604
|
|
|
|
priv->ieee80211->active_scan = 1;
|
|
priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | IEEE80211_OFDM_MODULATION;
|
|
priv->ieee80211->host_encrypt = 1;
|
|
priv->ieee80211->host_decrypt = 1;
|
|
priv->ieee80211->start_send_beacons = NULL; //-by amy 080604
|
|
priv->ieee80211->stop_send_beacons = NULL; //-by amy 080604
|
|
priv->ieee80211->softmac_hard_start_xmit = rtl8192_hard_start_xmit;
|
|
priv->ieee80211->set_chan = rtl8192_set_chan;
|
|
priv->ieee80211->link_change = rtl8192_link_change;
|
|
priv->ieee80211->softmac_data_hard_start_xmit = rtl8192_hard_data_xmit;
|
|
priv->ieee80211->data_hard_stop = rtl8192_data_hard_stop;
|
|
priv->ieee80211->data_hard_resume = rtl8192_data_hard_resume;
|
|
priv->ieee80211->init_wmmparam_flag = 0;
|
|
priv->ieee80211->fts = DEFAULT_FRAG_THRESHOLD;
|
|
priv->ieee80211->check_nic_enough_desc = check_nic_enough_desc;
|
|
priv->ieee80211->tx_headroom = TX_PACKET_SHIFT_BYTES;
|
|
priv->ieee80211->qos_support = 1;
|
|
|
|
//added by WB
|
|
priv->ieee80211->SetBWModeHandler = rtl8192_SetBWMode;
|
|
priv->ieee80211->handle_assoc_response = rtl8192_handle_assoc_response;
|
|
priv->ieee80211->handle_beacon = rtl8192_handle_beacon;
|
|
//added by david
|
|
priv->ieee80211->GetNmodeSupportBySecCfg = GetNmodeSupportBySecCfg8192;
|
|
priv->ieee80211->GetHalfNmodeSupportByAPsHandler = GetHalfNmodeSupportByAPs819xUsb;
|
|
priv->ieee80211->SetWirelessMode = rtl8192_SetWirelessMode;
|
|
//added by amy
|
|
priv->ieee80211->InitialGainHandler = InitialGain819xUsb;
|
|
priv->card_type = USB;
|
|
#ifdef TO_DO_LIST
|
|
if (Adapter->bInHctTest) {
|
|
pHalData->ShortRetryLimit = 7;
|
|
pHalData->LongRetryLimit = 7;
|
|
}
|
|
#endif
|
|
priv->ShortRetryLimit = 0x30;
|
|
priv->LongRetryLimit = 0x30;
|
|
priv->EarlyRxThreshold = 7;
|
|
priv->enable_gpio0 = 0;
|
|
priv->TransmitConfig =
|
|
(TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
|
|
(priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit
|
|
(priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit
|
|
(false ? TCR_SAT : 0); // FALSE: HW provides PLCP length and LENGEXT, TRUE: SW provides them
|
|
#ifdef TO_DO_LIST
|
|
if (Adapter->bInHctTest)
|
|
pHalData->ReceiveConfig = pHalData->CSMethod |
|
|
RCR_AMF | RCR_ADF | //accept management/data
|
|
//guangan200710
|
|
RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
|
|
RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
|
|
RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet
|
|
((u32)7<<RCR_MXDMA_OFFSET) | // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
|
|
(pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) | // Rx FIFO Threshold, 7: No Rx threshold.
|
|
(pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt : 0);
|
|
else
|
|
|
|
#endif
|
|
priv->ReceiveConfig =
|
|
RCR_AMF | RCR_ADF | //accept management/data
|
|
RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko.
|
|
RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC
|
|
((u32)7<<RCR_MXDMA_OFFSET)| // Max DMA Burst Size per Rx DMA Burst, 7: unlimited.
|
|
(priv->EarlyRxThreshold<<RX_FIFO_THRESHOLD_SHIFT) | // Rx FIFO Threshold, 7: No Rx threshold.
|
|
(priv->EarlyRxThreshold == 7 ? RCR_ONLYERLPKT : 0);
|
|
|
|
priv->AcmControl = 0;
|
|
priv->pFirmware = kzalloc(sizeof(rt_firmware), GFP_KERNEL);
|
|
|
|
/* rx related queue */
|
|
skb_queue_head_init(&priv->rx_queue);
|
|
skb_queue_head_init(&priv->skb_queue);
|
|
|
|
/* Tx related queue */
|
|
for (i = 0; i < MAX_QUEUE_SIZE; i++)
|
|
skb_queue_head_init(&priv->ieee80211->skb_waitQ[i]);
|
|
for (i = 0; i < MAX_QUEUE_SIZE; i++)
|
|
skb_queue_head_init(&priv->ieee80211->skb_aggQ[i]);
|
|
for (i = 0; i < MAX_QUEUE_SIZE; i++)
|
|
skb_queue_head_init(&priv->ieee80211->skb_drv_aggQ[i]);
|
|
priv->rf_set_chan = rtl8192_phy_SwChnl;
|
|
}
|
|
|
|
//init lock here
|
|
static void rtl8192_init_priv_lock(struct r8192_priv *priv)
|
|
{
|
|
spin_lock_init(&priv->tx_lock);
|
|
spin_lock_init(&priv->irq_lock);//added by thomas
|
|
sema_init(&priv->wx_sem, 1);
|
|
sema_init(&priv->rf_sem, 1);
|
|
mutex_init(&priv->mutex);
|
|
}
|
|
|
|
static void rtl819x_watchdog_wqcallback(struct work_struct *work);
|
|
|
|
static void rtl8192_irq_rx_tasklet(struct r8192_priv *priv);
|
|
//init tasklet and wait_queue here. only 2.6 above kernel is considered
|
|
#define DRV_NAME "wlan0"
|
|
static void rtl8192_init_priv_task(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
priv->priv_wq = create_workqueue(DRV_NAME);
|
|
|
|
INIT_WORK(&priv->reset_wq, rtl8192_restart);
|
|
|
|
INIT_DELAYED_WORK(&priv->watch_dog_wq, rtl819x_watchdog_wqcallback);
|
|
INIT_DELAYED_WORK(&priv->txpower_tracking_wq, dm_txpower_trackingcallback);
|
|
INIT_DELAYED_WORK(&priv->rfpath_check_wq, dm_rf_pathcheck_workitemcallback);
|
|
INIT_DELAYED_WORK(&priv->update_beacon_wq, rtl8192_update_beacon);
|
|
INIT_DELAYED_WORK(&priv->initialgain_operate_wq, InitialGainOperateWorkItemCallBack);
|
|
INIT_WORK(&priv->qos_activate, rtl8192_qos_activate);
|
|
|
|
tasklet_init(&priv->irq_rx_tasklet,
|
|
(void(*)(unsigned long))rtl8192_irq_rx_tasklet,
|
|
(unsigned long)priv);
|
|
}
|
|
|
|
static void rtl8192_get_eeprom_size(struct net_device *dev)
|
|
{
|
|
u16 curCR = 0;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
|
|
read_nic_word_E(dev, EPROM_CMD, &curCR);
|
|
RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR);
|
|
//whether need I consider BIT5?
|
|
priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46;
|
|
RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __func__, priv->epromtype);
|
|
}
|
|
|
|
//used to swap endian. as ntohl & htonl are not necessary to swap endian, so use this instead.
|
|
static inline u16 endian_swap(u16 *data)
|
|
{
|
|
u16 tmp = *data;
|
|
*data = (tmp >> 8) | (tmp << 8);
|
|
return *data;
|
|
}
|
|
static void rtl8192_read_eeprom_info(struct net_device *dev)
|
|
{
|
|
u16 wEPROM_ID = 0;
|
|
u8 bMac_Tmp_Addr[6] = {0x00, 0xe0, 0x4c, 0x00, 0x00, 0x02};
|
|
u8 bLoad_From_EEPOM = false;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u16 tmpValue = 0;
|
|
int i;
|
|
RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
|
|
wEPROM_ID = eprom_read(dev, 0); //first read EEPROM ID out;
|
|
RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID);
|
|
|
|
if (wEPROM_ID != RTL8190_EEPROM_ID) {
|
|
RT_TRACE(COMP_ERR, "EEPROM ID is invalid(is 0x%x(should be 0x%x)\n", wEPROM_ID, RTL8190_EEPROM_ID);
|
|
} else {
|
|
bLoad_From_EEPOM = true;
|
|
}
|
|
|
|
if (bLoad_From_EEPOM) {
|
|
tmpValue = eprom_read(dev, EEPROM_VID>>1);
|
|
priv->eeprom_vid = endian_swap(&tmpValue);
|
|
priv->eeprom_pid = eprom_read(dev, EEPROM_PID>>1);
|
|
tmpValue = eprom_read(dev, EEPROM_ChannelPlan>>1);
|
|
priv->eeprom_ChannelPlan = (tmpValue & 0xff00)>>8;
|
|
priv->btxpowerdata_readfromEEPORM = true;
|
|
priv->eeprom_CustomerID = eprom_read(dev, (EEPROM_Customer_ID>>1)) >>8;
|
|
} else {
|
|
priv->eeprom_vid = 0;
|
|
priv->eeprom_pid = 0;
|
|
priv->card_8192_version = VERSION_819xU_B;
|
|
priv->eeprom_ChannelPlan = 0;
|
|
priv->eeprom_CustomerID = 0;
|
|
}
|
|
RT_TRACE(COMP_EPROM, "vid:0x%4x, pid:0x%4x, CustomID:0x%2x, ChanPlan:0x%x\n", priv->eeprom_vid, priv->eeprom_pid, priv->eeprom_CustomerID, priv->eeprom_ChannelPlan);
|
|
//set channelplan from eeprom
|
|
priv->ChannelPlan = priv->eeprom_ChannelPlan;
|
|
if (bLoad_From_EEPOM) {
|
|
int i;
|
|
for (i = 0; i < 6; i += 2) {
|
|
u16 tmp = 0;
|
|
tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
|
|
*(u16 *)(&dev->dev_addr[i]) = tmp;
|
|
}
|
|
} else {
|
|
memcpy(dev->dev_addr, bMac_Tmp_Addr, 6);
|
|
//should I set IDR0 here?
|
|
}
|
|
RT_TRACE(COMP_EPROM, "MAC addr:%pM\n", dev->dev_addr);
|
|
priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R
|
|
priv->rf_chip = RF_8256;
|
|
|
|
if (priv->card_8192_version == (u8)VERSION_819xU_A) {
|
|
//read Tx power gain offset of legacy OFDM to HT rate
|
|
if (bLoad_From_EEPOM)
|
|
priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff>>1))&0xff00) >> 8;
|
|
else
|
|
priv->EEPROMTxPowerDiff = EEPROM_Default_TxPower;
|
|
RT_TRACE(COMP_EPROM, "TxPowerDiff:%d\n", priv->EEPROMTxPowerDiff);
|
|
//read ThermalMeter from EEPROM
|
|
if (bLoad_From_EEPOM)
|
|
priv->EEPROMThermalMeter = (u8)(eprom_read(dev, (EEPROM_ThermalMeter>>1))&0x00ff);
|
|
else
|
|
priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
|
|
RT_TRACE(COMP_EPROM, "ThermalMeter:%d\n", priv->EEPROMThermalMeter);
|
|
//vivi, for tx power track
|
|
priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
|
|
//read antenna tx power offset of B/C/D to A from EEPROM
|
|
if (bLoad_From_EEPOM)
|
|
priv->EEPROMPwDiff = (eprom_read(dev, (EEPROM_PwDiff>>1))&0x0f00)>>8;
|
|
else
|
|
priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
|
|
RT_TRACE(COMP_EPROM, "TxPwDiff:%d\n", priv->EEPROMPwDiff);
|
|
// Read CrystalCap from EEPROM
|
|
if (bLoad_From_EEPOM)
|
|
priv->EEPROMCrystalCap = (eprom_read(dev, (EEPROM_CrystalCap>>1))&0x0f);
|
|
else
|
|
priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
|
|
RT_TRACE(COMP_EPROM, "CrystalCap = %d\n", priv->EEPROMCrystalCap);
|
|
//get per-channel Tx power level
|
|
if (bLoad_From_EEPOM)
|
|
priv->EEPROM_Def_Ver = (eprom_read(dev, (EEPROM_TxPwIndex_Ver>>1))&0xff00)>>8;
|
|
else
|
|
priv->EEPROM_Def_Ver = 1;
|
|
RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
|
|
if (priv->EEPROM_Def_Ver == 0) { /* old eeprom definition */
|
|
int i;
|
|
if (bLoad_From_EEPOM)
|
|
priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK>>1))&0xff) >> 8;
|
|
else
|
|
priv->EEPROMTxPowerLevelCCK = 0x10;
|
|
RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
|
|
for (i = 0; i < 3; i++) {
|
|
if (bLoad_From_EEPOM) {
|
|
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G+i)>>1);
|
|
if (((EEPROM_TxPwIndex_OFDM_24G+i) % 2) == 0)
|
|
tmpValue = tmpValue & 0x00ff;
|
|
else
|
|
tmpValue = (tmpValue & 0xff00) >> 8;
|
|
} else {
|
|
tmpValue = 0x10;
|
|
}
|
|
priv->EEPROMTxPowerLevelOFDM24G[i] = (u8) tmpValue;
|
|
RT_TRACE(COMP_EPROM, "OFDM 2.4G Tx Power Level, Index %d = 0x%02x\n", i, priv->EEPROMTxPowerLevelCCK);
|
|
}
|
|
} else if (priv->EEPROM_Def_Ver == 1) {
|
|
if (bLoad_From_EEPOM) {
|
|
tmpValue = eprom_read(dev,
|
|
EEPROM_TxPwIndex_CCK_V1 >> 1);
|
|
tmpValue = (tmpValue & 0xff00) >> 8;
|
|
} else {
|
|
tmpValue = 0x10;
|
|
}
|
|
priv->EEPROMTxPowerLevelCCK_V1[0] = (u8)tmpValue;
|
|
|
|
if (bLoad_From_EEPOM)
|
|
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2)>>1);
|
|
else
|
|
tmpValue = 0x1010;
|
|
*((u16 *)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
|
|
if (bLoad_From_EEPOM)
|
|
tmpValue = eprom_read(dev,
|
|
EEPROM_TxPwIndex_OFDM_24G_V1 >> 1);
|
|
else
|
|
tmpValue = 0x1010;
|
|
*((u16 *)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue;
|
|
if (bLoad_From_EEPOM)
|
|
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G_V1+2)>>1);
|
|
else
|
|
tmpValue = 0x10;
|
|
priv->EEPROMTxPowerLevelOFDM24G[2] = (u8)tmpValue;
|
|
}//endif EEPROM_Def_Ver == 1
|
|
|
|
//update HAL variables
|
|
//
|
|
for (i = 0; i < 14; i++) {
|
|
if (i <= 3)
|
|
priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[0];
|
|
else if (i >= 4 && i <= 9)
|
|
priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[1];
|
|
else
|
|
priv->TxPowerLevelOFDM24G[i] = priv->EEPROMTxPowerLevelOFDM24G[2];
|
|
}
|
|
|
|
for (i = 0; i < 14; i++) {
|
|
if (priv->EEPROM_Def_Ver == 0) {
|
|
if (i <= 3)
|
|
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[0] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
|
|
else if (i >= 4 && i <= 9)
|
|
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK;
|
|
else
|
|
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelOFDM24G[2] + (priv->EEPROMTxPowerLevelCCK - priv->EEPROMTxPowerLevelOFDM24G[1]);
|
|
} else if (priv->EEPROM_Def_Ver == 1) {
|
|
if (i <= 3)
|
|
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[0];
|
|
else if (i >= 4 && i <= 9)
|
|
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[1];
|
|
else
|
|
priv->TxPowerLevelCCK[i] = priv->EEPROMTxPowerLevelCCK_V1[2];
|
|
}
|
|
}
|
|
priv->TxPowerDiff = priv->EEPROMPwDiff;
|
|
// Antenna B gain offset to antenna A, bit0~3
|
|
priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
|
|
// Antenna C gain offset to antenna A, bit4~7
|
|
priv->AntennaTxPwDiff[1] = (priv->EEPROMTxPowerDiff & 0xf0)>>4;
|
|
// CrystalCap, bit12~15
|
|
priv->CrystalCap = priv->EEPROMCrystalCap;
|
|
// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
|
|
// 92U does not enable TX power tracking.
|
|
priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
|
|
}//end if VersionID == VERSION_819xU_A
|
|
|
|
//added by vivi, for dlink led, 20080416
|
|
switch (priv->eeprom_CustomerID) {
|
|
case EEPROM_CID_RUNTOP:
|
|
priv->CustomerID = RT_CID_819x_RUNTOP;
|
|
break;
|
|
|
|
case EEPROM_CID_DLINK:
|
|
priv->CustomerID = RT_CID_DLINK;
|
|
break;
|
|
|
|
default:
|
|
priv->CustomerID = RT_CID_DEFAULT;
|
|
break;
|
|
|
|
}
|
|
|
|
switch (priv->CustomerID) {
|
|
case RT_CID_819x_RUNTOP:
|
|
priv->LedStrategy = SW_LED_MODE2;
|
|
break;
|
|
|
|
case RT_CID_DLINK:
|
|
priv->LedStrategy = SW_LED_MODE4;
|
|
break;
|
|
|
|
default:
|
|
priv->LedStrategy = SW_LED_MODE0;
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
if (priv->rf_type == RF_1T2R) {
|
|
RT_TRACE(COMP_EPROM, "\n1T2R config\n");
|
|
} else {
|
|
RT_TRACE(COMP_EPROM, "\n2T4R config\n");
|
|
}
|
|
|
|
// 2008/01/16 MH We can only know RF type in the function. So we have to init
|
|
// DIG RATR table again.
|
|
init_rate_adaptive(dev);
|
|
//we need init DIG RATR table here again.
|
|
|
|
RT_TRACE(COMP_EPROM, "<===========%s()\n", __func__);
|
|
}
|
|
|
|
static short rtl8192_get_channel_map(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
if (priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN) {
|
|
netdev_err(dev, "rtl8180_init: Error channel plan! Set to default.\n");
|
|
priv->ChannelPlan = 0;
|
|
}
|
|
RT_TRACE(COMP_INIT, "Channel plan is %d\n", priv->ChannelPlan);
|
|
|
|
rtl819x_set_channel_map(priv->ChannelPlan, priv);
|
|
return 0;
|
|
}
|
|
|
|
static short rtl8192_init(struct net_device *dev)
|
|
{
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
memset(&(priv->stats), 0, sizeof(struct Stats));
|
|
memset(priv->txqueue_to_outpipemap, 0, 9);
|
|
#ifdef PIPE12
|
|
{
|
|
int i = 0;
|
|
u8 queuetopipe[] = {3, 2, 1, 0, 4, 8, 7, 6, 5};
|
|
memcpy(priv->txqueue_to_outpipemap, queuetopipe, 9);
|
|
}
|
|
#else
|
|
{
|
|
u8 queuetopipe[] = {3, 2, 1, 0, 4, 4, 0, 4, 4};
|
|
memcpy(priv->txqueue_to_outpipemap, queuetopipe, 9);
|
|
}
|
|
#endif
|
|
rtl8192_init_priv_variable(dev);
|
|
rtl8192_init_priv_lock(priv);
|
|
rtl8192_init_priv_task(dev);
|
|
rtl8192_get_eeprom_size(dev);
|
|
rtl8192_read_eeprom_info(dev);
|
|
rtl8192_get_channel_map(dev);
|
|
init_hal_dm(dev);
|
|
setup_timer(&priv->watch_dog_timer, watch_dog_timer_callback,
|
|
(unsigned long)dev);
|
|
if (rtl8192_usb_initendpoints(dev) != 0) {
|
|
DMESG("Endopoints initialization failed");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************************************
|
|
*function: This function actually only set RRSR, RATR and BW_OPMODE registers
|
|
* not to do all the hw config as its name says
|
|
* input: net_device dev
|
|
* output: none
|
|
* return: none
|
|
* notice: This part need to modified according to the rate set we filtered
|
|
* ****************************************************************************/
|
|
static void rtl8192_hwconfig(struct net_device *dev)
|
|
{
|
|
u32 regRATR = 0, regRRSR = 0;
|
|
u8 regBwOpMode = 0, regTmp = 0;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32 ratr_value = 0;
|
|
|
|
// Set RRSR, RATR, and BW_OPMODE registers
|
|
//
|
|
switch (priv->ieee80211->mode) {
|
|
case WIRELESS_MODE_B:
|
|
regBwOpMode = BW_OPMODE_20MHZ;
|
|
regRATR = RATE_ALL_CCK;
|
|
regRRSR = RATE_ALL_CCK;
|
|
break;
|
|
case WIRELESS_MODE_A:
|
|
regBwOpMode = BW_OPMODE_5G |BW_OPMODE_20MHZ;
|
|
regRATR = RATE_ALL_OFDM_AG;
|
|
regRRSR = RATE_ALL_OFDM_AG;
|
|
break;
|
|
case WIRELESS_MODE_G:
|
|
regBwOpMode = BW_OPMODE_20MHZ;
|
|
regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
|
|
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
|
|
break;
|
|
case WIRELESS_MODE_AUTO:
|
|
#ifdef TO_DO_LIST
|
|
if (Adapter->bInHctTest) {
|
|
regBwOpMode = BW_OPMODE_20MHZ;
|
|
regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
|
|
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
regBwOpMode = BW_OPMODE_20MHZ;
|
|
regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
|
|
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
|
|
}
|
|
break;
|
|
case WIRELESS_MODE_N_24G:
|
|
// It support CCK rate by default.
|
|
// CCK rate will be filtered out only when associated AP does not support it.
|
|
regBwOpMode = BW_OPMODE_20MHZ;
|
|
regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
|
|
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
|
|
break;
|
|
case WIRELESS_MODE_N_5G:
|
|
regBwOpMode = BW_OPMODE_5G;
|
|
regRATR = RATE_ALL_OFDM_AG | RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
|
|
regRRSR = RATE_ALL_OFDM_AG;
|
|
break;
|
|
}
|
|
|
|
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
|
|
ratr_value = regRATR;
|
|
if (priv->rf_type == RF_1T2R)
|
|
ratr_value &= ~(RATE_ALL_OFDM_2SS);
|
|
write_nic_dword(dev, RATR0, ratr_value);
|
|
write_nic_byte(dev, UFWP, 1);
|
|
read_nic_byte(dev, 0x313, ®Tmp);
|
|
regRRSR = ((regTmp) << 24) | (regRRSR & 0x00ffffff);
|
|
write_nic_dword(dev, RRSR, regRRSR);
|
|
|
|
//
|
|
// Set Retry Limit here
|
|
//
|
|
write_nic_word(dev, RETRY_LIMIT,
|
|
priv->ShortRetryLimit << RETRY_LIMIT_SHORT_SHIFT |
|
|
priv->LongRetryLimit << RETRY_LIMIT_LONG_SHIFT);
|
|
// Set Contention Window here
|
|
|
|
// Set Tx AGC
|
|
|
|
// Set Tx Antenna including Feedback control
|
|
|
|
// Set Auto Rate fallback control
|
|
|
|
|
|
}
|
|
|
|
|
|
//InitializeAdapter and PhyCfg
|
|
static bool rtl8192_adapter_start(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32 dwRegRead = 0;
|
|
bool init_status = true;
|
|
u8 SECR_value = 0x0;
|
|
u8 tmp;
|
|
RT_TRACE(COMP_INIT, "====>%s()\n", __func__);
|
|
priv->Rf_Mode = RF_OP_By_SW_3wire;
|
|
//for ASIC power on sequence
|
|
write_nic_byte_E(dev, 0x5f, 0x80);
|
|
mdelay(50);
|
|
write_nic_byte_E(dev, 0x5f, 0xf0);
|
|
write_nic_byte_E(dev, 0x5d, 0x00);
|
|
write_nic_byte_E(dev, 0x5e, 0x80);
|
|
write_nic_byte(dev, 0x17, 0x37);
|
|
mdelay(10);
|
|
priv->pFirmware->firmware_status = FW_STATUS_0_INIT;
|
|
//config CPUReset Register
|
|
//Firmware Reset or not?
|
|
read_nic_dword(dev, CPU_GEN, &dwRegRead);
|
|
if (priv->pFirmware->firmware_status == FW_STATUS_0_INIT)
|
|
dwRegRead |= CPU_GEN_SYSTEM_RESET; //do nothing here?
|
|
else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY)
|
|
dwRegRead |= CPU_GEN_FIRMWARE_RESET;
|
|
else
|
|
RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __func__, priv->pFirmware->firmware_status);
|
|
|
|
write_nic_dword(dev, CPU_GEN, dwRegRead);
|
|
//config BB.
|
|
rtl8192_BBConfig(dev);
|
|
|
|
//Loopback mode or not
|
|
priv->LoopbackMode = RTL819xU_NO_LOOPBACK;
|
|
|
|
read_nic_dword(dev, CPU_GEN, &dwRegRead);
|
|
if (priv->LoopbackMode == RTL819xU_NO_LOOPBACK)
|
|
dwRegRead = (dwRegRead & CPU_GEN_NO_LOOPBACK_MSK) | CPU_GEN_NO_LOOPBACK_SET;
|
|
else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK)
|
|
dwRegRead |= CPU_CCK_LOOPBACK;
|
|
else
|
|
RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __func__, priv->LoopbackMode);
|
|
|
|
write_nic_dword(dev, CPU_GEN, dwRegRead);
|
|
|
|
//after reset cpu, we need wait for a seconds to write in register.
|
|
udelay(500);
|
|
|
|
//xiong add for new bitfile:usb suspend reset pin set to 1. //do we need?
|
|
read_nic_byte_E(dev, 0x5f, &tmp);
|
|
write_nic_byte_E(dev, 0x5f, tmp|0x20);
|
|
|
|
//Set Hardware
|
|
rtl8192_hwconfig(dev);
|
|
|
|
//turn on Tx/Rx
|
|
write_nic_byte(dev, CMDR, CR_RE|CR_TE);
|
|
|
|
//set IDR0 here
|
|
write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
|
|
write_nic_word(dev, MAC4, ((u16 *)(dev->dev_addr + 4))[0]);
|
|
|
|
//set RCR
|
|
write_nic_dword(dev, RCR, priv->ReceiveConfig);
|
|
|
|
//Initialize Number of Reserved Pages in Firmware Queue
|
|
write_nic_dword(dev, RQPN1, NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
|
|
NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
|
|
NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
|
|
NUM_OF_PAGE_IN_FW_QUEUE_VO <<RSVD_FW_QUEUE_PAGE_VO_SHIFT);
|
|
write_nic_dword(dev, RQPN2, NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
|
|
NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
|
|
write_nic_dword(dev, RQPN3, APPLIED_RESERVED_QUEUE_IN_FW|
|
|
NUM_OF_PAGE_IN_FW_QUEUE_BCN<<RSVD_FW_QUEUE_PAGE_BCN_SHIFT);
|
|
write_nic_dword(dev, RATR0+4*7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
|
|
|
|
//Set AckTimeout
|
|
// TODO: (it value is only for FPGA version). need to be changed!!2006.12.18, by Emily
|
|
write_nic_byte(dev, ACK_TIMEOUT, 0x30);
|
|
|
|
if (priv->ResetProgress == RESET_TYPE_NORESET)
|
|
rtl8192_SetWirelessMode(dev, priv->ieee80211->mode);
|
|
if (priv->ResetProgress == RESET_TYPE_NORESET) {
|
|
CamResetAllEntry(dev);
|
|
SECR_value |= SCR_TxEncEnable;
|
|
SECR_value |= SCR_RxDecEnable;
|
|
SECR_value |= SCR_NoSKMC;
|
|
write_nic_byte(dev, SECR, SECR_value);
|
|
}
|
|
|
|
//Beacon related
|
|
write_nic_word(dev, ATIMWND, 2);
|
|
write_nic_word(dev, BCN_INTERVAL, 100);
|
|
|
|
#define DEFAULT_EDCA 0x005e4332
|
|
{
|
|
int i;
|
|
for (i = 0; i < QOS_QUEUE_NUM; i++)
|
|
write_nic_dword(dev, WDCAPARA_ADD[i], DEFAULT_EDCA);
|
|
}
|
|
|
|
rtl8192_phy_configmac(dev);
|
|
|
|
if (priv->card_8192_version == (u8) VERSION_819xU_A) {
|
|
rtl8192_phy_getTxPower(dev);
|
|
rtl8192_phy_setTxPower(dev, priv->chan);
|
|
}
|
|
|
|
//Firmware download
|
|
init_status = init_firmware(dev);
|
|
if (!init_status) {
|
|
RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n", __func__);
|
|
return init_status;
|
|
}
|
|
RT_TRACE(COMP_INIT, "%s():after firmware download\n", __func__);
|
|
//
|
|
#ifdef TO_DO_LIST
|
|
if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
|
|
if (pMgntInfo->RegRfOff) { /* User disable RF via registry. */
|
|
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
|
|
MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
|
|
// Those actions will be discard in MgntActSet_RF_State because of the same state
|
|
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
|
|
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
|
|
} else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { /* H/W or S/W RF OFF before sleep. */
|
|
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason));
|
|
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
|
|
} else {
|
|
pHalData->eRFPowerState = eRfOn;
|
|
pMgntInfo->RfOffReason = 0;
|
|
RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): RF is on ----------\n"));
|
|
}
|
|
} else {
|
|
if (pHalData->eRFPowerState == eRfOff) {
|
|
MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
|
|
// Those actions will be discard in MgntActSet_RF_State because of the same state
|
|
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
|
|
PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
|
|
}
|
|
}
|
|
#endif
|
|
//config RF.
|
|
if (priv->ResetProgress == RESET_TYPE_NORESET) {
|
|
rtl8192_phy_RFConfig(dev);
|
|
RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__);
|
|
}
|
|
|
|
|
|
if (priv->ieee80211->FwRWRF)
|
|
// We can force firmware to do RF-R/W
|
|
priv->Rf_Mode = RF_OP_By_FW;
|
|
else
|
|
priv->Rf_Mode = RF_OP_By_SW_3wire;
|
|
|
|
|
|
rtl8192_phy_updateInitGain(dev);
|
|
/*--set CCK and OFDM Block "ON"--*/
|
|
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1);
|
|
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1);
|
|
|
|
if (priv->ResetProgress == RESET_TYPE_NORESET) {
|
|
//if D or C cut
|
|
u8 tmpvalue;
|
|
read_nic_byte(dev, 0x301, &tmpvalue);
|
|
if (tmpvalue == 0x03) {
|
|
priv->bDcut = true;
|
|
RT_TRACE(COMP_POWER_TRACKING, "D-cut\n");
|
|
} else {
|
|
priv->bDcut = false;
|
|
RT_TRACE(COMP_POWER_TRACKING, "C-cut\n");
|
|
}
|
|
dm_initialize_txpower_tracking(dev);
|
|
|
|
if (priv->bDcut) {
|
|
u32 i, TempCCk;
|
|
u32 tmpRegA = rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord);
|
|
for (i = 0; i < TxBBGainTableLength; i++) {
|
|
if (tmpRegA == priv->txbbgain_table[i].txbbgain_value) {
|
|
priv->rfa_txpowertrackingindex = (u8)i;
|
|
priv->rfa_txpowertrackingindex_real = (u8)i;
|
|
priv->rfa_txpowertracking_default = priv->rfa_txpowertrackingindex;
|
|
break;
|
|
}
|
|
}
|
|
|
|
TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2);
|
|
|
|
for (i = 0; i < CCKTxBBGainTableLength; i++) {
|
|
|
|
if (TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0]) {
|
|
priv->cck_present_attentuation_20Mdefault = (u8) i;
|
|
break;
|
|
}
|
|
}
|
|
priv->cck_present_attentuation_40Mdefault = 0;
|
|
priv->cck_present_attentuation_difference = 0;
|
|
priv->cck_present_attentuation = priv->cck_present_attentuation_20Mdefault;
|
|
|
|
}
|
|
}
|
|
write_nic_byte(dev, 0x87, 0x0);
|
|
|
|
|
|
return init_status;
|
|
}
|
|
|
|
/* this configures registers for beacon tx and enables it via
|
|
* rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might
|
|
* be used to stop beacon transmission
|
|
*/
|
|
/***************************************************************************
|
|
-------------------------------NET STUFF---------------------------
|
|
***************************************************************************/
|
|
|
|
static struct net_device_stats *rtl8192_stats(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
return &priv->ieee80211->stats;
|
|
}
|
|
|
|
static bool HalTxCheckStuck819xUsb(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u16 RegTxCounter;
|
|
bool bStuck = false;
|
|
read_nic_word(dev, 0x128, &RegTxCounter);
|
|
RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __func__, RegTxCounter, priv->TxCounter);
|
|
if (priv->TxCounter == RegTxCounter)
|
|
bStuck = true;
|
|
|
|
priv->TxCounter = RegTxCounter;
|
|
|
|
return bStuck;
|
|
}
|
|
|
|
/*
|
|
* <Assumption: RT_TX_SPINLOCK is acquired.>
|
|
* First added: 2006.11.19 by emily
|
|
*/
|
|
static RESET_TYPE TxCheckStuck(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 QueueID;
|
|
bool bCheckFwTxCnt = false;
|
|
|
|
//
|
|
// Decide such threshold according to current power save mode
|
|
//
|
|
|
|
for (QueueID = 0; QueueID <= BEACON_QUEUE; QueueID++) {
|
|
if (QueueID == TXCMD_QUEUE)
|
|
continue;
|
|
if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0))
|
|
continue;
|
|
|
|
bCheckFwTxCnt = true;
|
|
}
|
|
if (bCheckFwTxCnt) {
|
|
if (HalTxCheckStuck819xUsb(dev)) {
|
|
RT_TRACE(COMP_RESET, "TxCheckStuck(): Fw indicates no Tx condition! \n");
|
|
return RESET_TYPE_SILENT;
|
|
}
|
|
}
|
|
return RESET_TYPE_NORESET;
|
|
}
|
|
|
|
static bool HalRxCheckStuck819xUsb(struct net_device *dev)
|
|
{
|
|
u16 RegRxCounter;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
bool bStuck = false;
|
|
static u8 rx_chk_cnt;
|
|
read_nic_word(dev, 0x130, &RegRxCounter);
|
|
RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __func__, RegRxCounter, priv->RxCounter);
|
|
// If rssi is small, we should check rx for long time because of bad rx.
|
|
// or maybe it will continuous silent reset every 2 seconds.
|
|
rx_chk_cnt++;
|
|
if (priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High+5)) {
|
|
rx_chk_cnt = 0; //high rssi, check rx stuck right now.
|
|
} else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) &&
|
|
((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_40M) ||
|
|
(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb >= RateAdaptiveTH_Low_20M))) {
|
|
if (rx_chk_cnt < 2)
|
|
return bStuck;
|
|
else
|
|
rx_chk_cnt = 0;
|
|
} else if (((priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb < RateAdaptiveTH_Low_40M) ||
|
|
(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 && priv->undecorated_smoothed_pwdb < RateAdaptiveTH_Low_20M)) &&
|
|
priv->undecorated_smoothed_pwdb >= VeryLowRSSI) {
|
|
if (rx_chk_cnt < 4)
|
|
return bStuck;
|
|
else
|
|
rx_chk_cnt = 0;
|
|
} else {
|
|
if (rx_chk_cnt < 8)
|
|
return bStuck;
|
|
else
|
|
rx_chk_cnt = 0;
|
|
}
|
|
|
|
if (priv->RxCounter == RegRxCounter)
|
|
bStuck = true;
|
|
|
|
priv->RxCounter = RegRxCounter;
|
|
|
|
return bStuck;
|
|
}
|
|
|
|
static RESET_TYPE RxCheckStuck(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
bool bRxCheck = false;
|
|
|
|
if (priv->IrpPendingCount > 1)
|
|
bRxCheck = true;
|
|
|
|
if (bRxCheck) {
|
|
if (HalRxCheckStuck819xUsb(dev)) {
|
|
RT_TRACE(COMP_RESET, "RxStuck Condition\n");
|
|
return RESET_TYPE_SILENT;
|
|
}
|
|
}
|
|
return RESET_TYPE_NORESET;
|
|
}
|
|
|
|
|
|
/**
|
|
* This function is called by Checkforhang to check whether we should ask OS to reset driver
|
|
*
|
|
* \param pAdapter The adapter context for this miniport
|
|
*
|
|
* Note:NIC with USB interface sholud not call this function because we cannot scan descriptor
|
|
* to judge whether there is tx stuck.
|
|
* Note: This function may be required to be rewrite for Vista OS.
|
|
* <<<Assumption: Tx spinlock has been acquired >>>
|
|
*
|
|
* 8185 and 8185b does not implement this function. This is added by Emily at 2006.11.24
|
|
*/
|
|
static RESET_TYPE rtl819x_ifcheck_resetornot(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
RESET_TYPE TxResetType = RESET_TYPE_NORESET;
|
|
RESET_TYPE RxResetType = RESET_TYPE_NORESET;
|
|
RT_RF_POWER_STATE rfState;
|
|
|
|
rfState = priv->ieee80211->eRFPowerState;
|
|
|
|
TxResetType = TxCheckStuck(dev);
|
|
if (rfState != eRfOff ||
|
|
(priv->ieee80211->iw_mode != IW_MODE_ADHOC)) {
|
|
// If driver is in the status of firmware download failure , driver skips RF initialization and RF is
|
|
// in turned off state. Driver should check whether Rx stuck and do silent reset. And
|
|
// if driver is in firmware download failure status, driver should initialize RF in the following
|
|
// silent reset procedure Emily, 2008.01.21
|
|
|
|
// Driver should not check RX stuck in IBSS mode because it is required to
|
|
// set Check BSSID in order to send beacon, however, if check BSSID is
|
|
// set, STA cannot hear any packet at all. Emily, 2008.04.12
|
|
RxResetType = RxCheckStuck(dev);
|
|
}
|
|
if (TxResetType == RESET_TYPE_NORMAL || RxResetType == RESET_TYPE_NORMAL) {
|
|
return RESET_TYPE_NORMAL;
|
|
} else if (TxResetType == RESET_TYPE_SILENT || RxResetType == RESET_TYPE_SILENT) {
|
|
RT_TRACE(COMP_RESET, "%s():silent reset\n", __func__);
|
|
return RESET_TYPE_SILENT;
|
|
} else {
|
|
return RESET_TYPE_NORESET;
|
|
}
|
|
|
|
}
|
|
|
|
static void rtl8192_cancel_deferred_work(struct r8192_priv *priv);
|
|
static int _rtl8192_up(struct net_device *dev);
|
|
static int rtl8192_close(struct net_device *dev);
|
|
|
|
|
|
|
|
static void CamRestoreAllEntry(struct net_device *dev)
|
|
{
|
|
u8 EntryId = 0;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 *MacAddr = priv->ieee80211->current_network.bssid;
|
|
|
|
static u8 CAM_CONST_ADDR[4][6] = {
|
|
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
|
|
{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
|
|
{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
|
|
{0x00, 0x00, 0x00, 0x00, 0x00, 0x03} };
|
|
static u8 CAM_CONST_BROAD[] = {
|
|
0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
|
|
|
|
RT_TRACE(COMP_SEC, "CamRestoreAllEntry: \n");
|
|
|
|
|
|
if ((priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP40) ||
|
|
(priv->ieee80211->pairwise_key_type == KEY_TYPE_WEP104)) {
|
|
|
|
for (EntryId = 0; EntryId < 4; EntryId++) {
|
|
MacAddr = CAM_CONST_ADDR[EntryId];
|
|
setKey(dev, EntryId, EntryId,
|
|
priv->ieee80211->pairwise_key_type,
|
|
MacAddr, 0, NULL);
|
|
}
|
|
|
|
} else if (priv->ieee80211->pairwise_key_type == KEY_TYPE_TKIP) {
|
|
|
|
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
|
|
setKey(dev, 4, 0, priv->ieee80211->pairwise_key_type,
|
|
(u8 *)dev->dev_addr, 0, NULL);
|
|
else
|
|
setKey(dev, 4, 0, priv->ieee80211->pairwise_key_type,
|
|
MacAddr, 0, NULL);
|
|
} else if (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP) {
|
|
|
|
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
|
|
setKey(dev, 4, 0, priv->ieee80211->pairwise_key_type,
|
|
(u8 *)dev->dev_addr, 0, NULL);
|
|
else
|
|
setKey(dev, 4, 0, priv->ieee80211->pairwise_key_type,
|
|
MacAddr, 0, NULL);
|
|
}
|
|
|
|
|
|
|
|
if (priv->ieee80211->group_key_type == KEY_TYPE_TKIP) {
|
|
MacAddr = CAM_CONST_BROAD;
|
|
for (EntryId = 1; EntryId < 4; EntryId++) {
|
|
setKey(dev, EntryId, EntryId,
|
|
priv->ieee80211->group_key_type,
|
|
MacAddr, 0, NULL);
|
|
}
|
|
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
|
|
setKey(dev, 0, 0, priv->ieee80211->group_key_type,
|
|
CAM_CONST_ADDR[0], 0, NULL);
|
|
} else if (priv->ieee80211->group_key_type == KEY_TYPE_CCMP) {
|
|
MacAddr = CAM_CONST_BROAD;
|
|
for (EntryId = 1; EntryId < 4; EntryId++) {
|
|
setKey(dev, EntryId, EntryId,
|
|
priv->ieee80211->group_key_type,
|
|
MacAddr, 0, NULL);
|
|
}
|
|
|
|
if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
|
|
setKey(dev, 0, 0, priv->ieee80211->group_key_type,
|
|
CAM_CONST_ADDR[0], 0, NULL);
|
|
}
|
|
}
|
|
//////////////////////////////////////////////////////////////
|
|
// This function is used to fix Tx/Rx stop bug temporarily.
|
|
// This function will do "system reset" to NIC when Tx or Rx is stuck.
|
|
// The method checking Tx/Rx stuck of this function is supported by FW,
|
|
// which reports Tx and Rx counter to register 0x128 and 0x130.
|
|
//////////////////////////////////////////////////////////////
|
|
static void rtl819x_ifsilentreset(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 reset_times = 0;
|
|
int reset_status = 0;
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
|
|
|
|
// 2007.07.20. If we need to check CCK stop, please uncomment this line.
|
|
//bStuck = Adapter->HalFunc.CheckHWStopHandler(Adapter);
|
|
|
|
if (priv->ResetProgress == RESET_TYPE_NORESET) {
|
|
RESET_START:
|
|
|
|
RT_TRACE(COMP_RESET, "=========>Reset progress!! \n");
|
|
|
|
// Set the variable for reset.
|
|
priv->ResetProgress = RESET_TYPE_SILENT;
|
|
down(&priv->wx_sem);
|
|
if (priv->up == 0) {
|
|
RT_TRACE(COMP_ERR, "%s():the driver is not up! return\n", __func__);
|
|
up(&priv->wx_sem);
|
|
return;
|
|
}
|
|
priv->up = 0;
|
|
RT_TRACE(COMP_RESET, "%s():======>start to down the driver\n", __func__);
|
|
|
|
rtl8192_rtx_disable(dev);
|
|
rtl8192_cancel_deferred_work(priv);
|
|
deinit_hal_dm(dev);
|
|
del_timer_sync(&priv->watch_dog_timer);
|
|
|
|
ieee->sync_scan_hurryup = 1;
|
|
if (ieee->state == IEEE80211_LINKED) {
|
|
down(&ieee->wx_sem);
|
|
netdev_dbg(dev, "ieee->state is IEEE80211_LINKED\n");
|
|
ieee80211_stop_send_beacons(priv->ieee80211);
|
|
del_timer_sync(&ieee->associate_timer);
|
|
cancel_delayed_work(&ieee->associate_retry_wq);
|
|
ieee80211_stop_scan(ieee);
|
|
netif_carrier_off(dev);
|
|
up(&ieee->wx_sem);
|
|
} else {
|
|
netdev_dbg(dev, "ieee->state is NOT LINKED\n");
|
|
ieee80211_softmac_stop_protocol(priv->ieee80211);
|
|
}
|
|
up(&priv->wx_sem);
|
|
RT_TRACE(COMP_RESET, "%s():<==========down process is finished\n", __func__);
|
|
RT_TRACE(COMP_RESET, "%s():===========>start up the driver\n", __func__);
|
|
reset_status = _rtl8192_up(dev);
|
|
|
|
RT_TRACE(COMP_RESET, "%s():<===========up process is finished\n", __func__);
|
|
if (reset_status == -EAGAIN) {
|
|
if (reset_times < 3) {
|
|
reset_times++;
|
|
goto RESET_START;
|
|
} else {
|
|
RT_TRACE(COMP_ERR, " ERR!!! %s(): Reset Failed!!\n", __func__);
|
|
}
|
|
}
|
|
ieee->is_silent_reset = 1;
|
|
EnableHWSecurityConfig8192(dev);
|
|
if (ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_INFRA) {
|
|
ieee->set_chan(ieee->dev, ieee->current_network.channel);
|
|
|
|
queue_work(ieee->wq, &ieee->associate_complete_wq);
|
|
|
|
} else if (ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_ADHOC) {
|
|
ieee->set_chan(ieee->dev, ieee->current_network.channel);
|
|
ieee->link_change(ieee->dev);
|
|
|
|
ieee80211_start_send_beacons(ieee);
|
|
|
|
if (ieee->data_hard_resume)
|
|
ieee->data_hard_resume(ieee->dev);
|
|
netif_carrier_on(ieee->dev);
|
|
}
|
|
|
|
CamRestoreAllEntry(dev);
|
|
|
|
priv->ResetProgress = RESET_TYPE_NORESET;
|
|
priv->reset_count++;
|
|
|
|
priv->bForcedSilentReset = false;
|
|
priv->bResetInProgress = false;
|
|
|
|
// For test --> force write UFWP.
|
|
write_nic_byte(dev, UFWP, 1);
|
|
RT_TRACE(COMP_RESET, "Reset finished!! ====>[%d]\n", priv->reset_count);
|
|
}
|
|
}
|
|
|
|
static void rtl819x_update_rxcounts(struct r8192_priv *priv, u32 *TotalRxBcnNum,
|
|
u32 *TotalRxDataNum)
|
|
{
|
|
u16 SlotIndex;
|
|
u8 i;
|
|
|
|
*TotalRxBcnNum = 0;
|
|
*TotalRxDataNum = 0;
|
|
|
|
SlotIndex = (priv->ieee80211->LinkDetectInfo.SlotIndex++)%(priv->ieee80211->LinkDetectInfo.SlotNum);
|
|
priv->ieee80211->LinkDetectInfo.RxBcnNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod;
|
|
priv->ieee80211->LinkDetectInfo.RxDataNum[SlotIndex] = priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod;
|
|
for (i = 0; i < priv->ieee80211->LinkDetectInfo.SlotNum; i++) {
|
|
*TotalRxBcnNum += priv->ieee80211->LinkDetectInfo.RxBcnNum[i];
|
|
*TotalRxDataNum += priv->ieee80211->LinkDetectInfo.RxDataNum[i];
|
|
}
|
|
}
|
|
|
|
|
|
static void rtl819x_watchdog_wqcallback(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = container_of(work, struct delayed_work, work);
|
|
struct r8192_priv *priv = container_of(dwork, struct r8192_priv, watch_dog_wq);
|
|
struct net_device *dev = priv->ieee80211->dev;
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
RESET_TYPE ResetType = RESET_TYPE_NORESET;
|
|
static u8 check_reset_cnt;
|
|
bool bBusyTraffic = false;
|
|
u32 TotalRxBcnNum = 0;
|
|
u32 TotalRxDataNum = 0;
|
|
|
|
if (!priv->up)
|
|
return;
|
|
hal_dm_watchdog(dev);
|
|
|
|
//to get busy traffic condition
|
|
if (ieee->state == IEEE80211_LINKED) {
|
|
if (ieee->LinkDetectInfo.NumRxOkInPeriod > 666 ||
|
|
ieee->LinkDetectInfo.NumTxOkInPeriod > 666 ) {
|
|
bBusyTraffic = true;
|
|
}
|
|
ieee->LinkDetectInfo.NumRxOkInPeriod = 0;
|
|
ieee->LinkDetectInfo.NumTxOkInPeriod = 0;
|
|
ieee->LinkDetectInfo.bBusyTraffic = bBusyTraffic;
|
|
}
|
|
//added by amy for AP roaming
|
|
if (priv->ieee80211->state == IEEE80211_LINKED && priv->ieee80211->iw_mode == IW_MODE_INFRA) {
|
|
|
|
rtl819x_update_rxcounts(priv, &TotalRxBcnNum, &TotalRxDataNum);
|
|
if ((TotalRxBcnNum+TotalRxDataNum) == 0) {
|
|
#ifdef TODO
|
|
if (rfState == eRfOff)
|
|
RT_TRACE(COMP_ERR, "========>%s()\n", __func__);
|
|
#endif
|
|
netdev_dbg(dev, "===>%s(): AP is power off, connect another one\n", __func__);
|
|
priv->ieee80211->state = IEEE80211_ASSOCIATING;
|
|
notify_wx_assoc_event(priv->ieee80211);
|
|
RemovePeerTS(priv->ieee80211, priv->ieee80211->current_network.bssid);
|
|
priv->ieee80211->link_change(dev);
|
|
queue_work(priv->ieee80211->wq, &priv->ieee80211->associate_procedure_wq);
|
|
|
|
}
|
|
}
|
|
priv->ieee80211->LinkDetectInfo.NumRecvBcnInPeriod = 0;
|
|
priv->ieee80211->LinkDetectInfo.NumRecvDataInPeriod = 0;
|
|
//check if reset the driver
|
|
if (check_reset_cnt++ >= 3) {
|
|
ResetType = rtl819x_ifcheck_resetornot(dev);
|
|
check_reset_cnt = 3;
|
|
}
|
|
if ((priv->force_reset) || (priv->ResetProgress == RESET_TYPE_NORESET &&
|
|
(priv->bForcedSilentReset ||
|
|
(!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) { /* This is control by OID set in Pomelo */
|
|
RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __func__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType);
|
|
rtl819x_ifsilentreset(dev);
|
|
}
|
|
priv->force_reset = false;
|
|
priv->bForcedSilentReset = false;
|
|
priv->bResetInProgress = false;
|
|
RT_TRACE(COMP_TRACE, " <==RtUsbCheckForHangWorkItemCallback()\n");
|
|
|
|
}
|
|
|
|
static void watch_dog_timer_callback(unsigned long data)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
|
|
queue_delayed_work(priv->priv_wq, &priv->watch_dog_wq, 0);
|
|
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
|
|
}
|
|
static int _rtl8192_up(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int init_status = 0;
|
|
priv->up = 1;
|
|
priv->ieee80211->ieee_up = 1;
|
|
RT_TRACE(COMP_INIT, "Bringing up iface");
|
|
init_status = rtl8192_adapter_start(dev);
|
|
if (!init_status) {
|
|
RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization failed!\n", __func__);
|
|
priv->up = priv->ieee80211->ieee_up = 0;
|
|
return -EAGAIN;
|
|
}
|
|
RT_TRACE(COMP_INIT, "start adapter finished\n");
|
|
rtl8192_rx_enable(dev);
|
|
if (priv->ieee80211->state != IEEE80211_LINKED)
|
|
ieee80211_softmac_start_protocol(priv->ieee80211);
|
|
ieee80211_reset_queue(priv->ieee80211);
|
|
watch_dog_timer_callback((unsigned long) dev);
|
|
if (!netif_queue_stopped(dev))
|
|
netif_start_queue(dev);
|
|
else
|
|
netif_wake_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int rtl8192_open(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int ret;
|
|
down(&priv->wx_sem);
|
|
ret = rtl8192_up(dev);
|
|
up(&priv->wx_sem);
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
int rtl8192_up(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
if (priv->up == 1)
|
|
return -1;
|
|
|
|
return _rtl8192_up(dev);
|
|
}
|
|
|
|
|
|
static int rtl8192_close(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int ret;
|
|
|
|
down(&priv->wx_sem);
|
|
|
|
ret = rtl8192_down(dev);
|
|
|
|
up(&priv->wx_sem);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
int rtl8192_down(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int i;
|
|
|
|
if (priv->up == 0)
|
|
return -1;
|
|
|
|
priv->up = 0;
|
|
priv->ieee80211->ieee_up = 0;
|
|
RT_TRACE(COMP_DOWN, "==========>%s()\n", __func__);
|
|
/* FIXME */
|
|
if (!netif_queue_stopped(dev))
|
|
netif_stop_queue(dev);
|
|
|
|
rtl8192_rtx_disable(dev);
|
|
|
|
/* Tx related queue release */
|
|
for (i = 0; i < MAX_QUEUE_SIZE; i++)
|
|
skb_queue_purge(&priv->ieee80211->skb_waitQ[i]);
|
|
for (i = 0; i < MAX_QUEUE_SIZE; i++)
|
|
skb_queue_purge(&priv->ieee80211->skb_aggQ[i]);
|
|
|
|
for (i = 0; i < MAX_QUEUE_SIZE; i++)
|
|
skb_queue_purge(&priv->ieee80211->skb_drv_aggQ[i]);
|
|
|
|
//as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt
|
|
rtl8192_cancel_deferred_work(priv);
|
|
deinit_hal_dm(dev);
|
|
del_timer_sync(&priv->watch_dog_timer);
|
|
|
|
|
|
ieee80211_softmac_stop_protocol(priv->ieee80211);
|
|
memset(&priv->ieee80211->current_network, 0, offsetof(struct ieee80211_network, list));
|
|
RT_TRACE(COMP_DOWN, "<==========%s()\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
void rtl8192_commit(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int reset_status = 0;
|
|
if (priv->up == 0)
|
|
return;
|
|
priv->up = 0;
|
|
|
|
rtl8192_cancel_deferred_work(priv);
|
|
del_timer_sync(&priv->watch_dog_timer);
|
|
|
|
ieee80211_softmac_stop_protocol(priv->ieee80211);
|
|
|
|
rtl8192_rtx_disable(dev);
|
|
reset_status = _rtl8192_up(dev);
|
|
|
|
}
|
|
|
|
static void rtl8192_restart(struct work_struct *work)
|
|
{
|
|
struct r8192_priv *priv = container_of(work, struct r8192_priv, reset_wq);
|
|
struct net_device *dev = priv->ieee80211->dev;
|
|
|
|
down(&priv->wx_sem);
|
|
|
|
rtl8192_commit(dev);
|
|
|
|
up(&priv->wx_sem);
|
|
}
|
|
|
|
static void r8192_set_multicast(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
short promisc;
|
|
|
|
/* FIXME FIXME */
|
|
|
|
promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
|
|
|
|
if (promisc != priv->promisc)
|
|
|
|
priv->promisc = promisc;
|
|
}
|
|
|
|
|
|
static int r8192_set_mac_adr(struct net_device *dev, void *mac)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
struct sockaddr *addr = mac;
|
|
|
|
down(&priv->wx_sem);
|
|
|
|
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
|
|
|
|
schedule_work(&priv->reset_wq);
|
|
up(&priv->wx_sem);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* based on ipw2200 driver */
|
|
static int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct iwreq *wrq = (struct iwreq *)rq;
|
|
int ret = -1;
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
u32 key[4];
|
|
u8 broadcast_addr[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
|
|
struct iw_point *p = &wrq->u.data;
|
|
struct ieee_param *ipw = NULL;
|
|
|
|
down(&priv->wx_sem);
|
|
|
|
|
|
if (p->length < sizeof(struct ieee_param) || !p->pointer) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
ipw = memdup_user(p->pointer, p->length);
|
|
if (IS_ERR(ipw)) {
|
|
ret = PTR_ERR(ipw);
|
|
goto out;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case RTL_IOCTL_WPA_SUPPLICANT:
|
|
//parse here for HW security
|
|
if (ipw->cmd == IEEE_CMD_SET_ENCRYPTION) {
|
|
if (ipw->u.crypt.set_tx) {
|
|
if (strcmp(ipw->u.crypt.alg, "CCMP") == 0) {
|
|
ieee->pairwise_key_type = KEY_TYPE_CCMP;
|
|
} else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0) {
|
|
ieee->pairwise_key_type = KEY_TYPE_TKIP;
|
|
} else if (strcmp(ipw->u.crypt.alg, "WEP") == 0) {
|
|
if (ipw->u.crypt.key_len == 13)
|
|
ieee->pairwise_key_type = KEY_TYPE_WEP104;
|
|
else if (ipw->u.crypt.key_len == 5)
|
|
ieee->pairwise_key_type = KEY_TYPE_WEP40;
|
|
} else {
|
|
ieee->pairwise_key_type = KEY_TYPE_NA;
|
|
}
|
|
|
|
if (ieee->pairwise_key_type) {
|
|
memcpy((u8 *)key, ipw->u.crypt.key, 16);
|
|
EnableHWSecurityConfig8192(dev);
|
|
//we fill both index entry and 4th entry for pairwise key as in IPW interface, adhoc will only get here, so we need index entry for its default key serching!
|
|
//added by WB.
|
|
setKey(dev, 4, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key);
|
|
if (ieee->auth_mode != 2)
|
|
setKey(dev, ipw->u.crypt.idx, ipw->u.crypt.idx, ieee->pairwise_key_type, (u8 *)ieee->ap_mac_addr, 0, key);
|
|
}
|
|
} else {
|
|
memcpy((u8 *)key, ipw->u.crypt.key, 16);
|
|
if (strcmp(ipw->u.crypt.alg, "CCMP") == 0) {
|
|
ieee->group_key_type = KEY_TYPE_CCMP;
|
|
} else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0) {
|
|
ieee->group_key_type = KEY_TYPE_TKIP;
|
|
} else if (strcmp(ipw->u.crypt.alg, "WEP") == 0) {
|
|
if (ipw->u.crypt.key_len == 13)
|
|
ieee->group_key_type = KEY_TYPE_WEP104;
|
|
else if (ipw->u.crypt.key_len == 5)
|
|
ieee->group_key_type = KEY_TYPE_WEP40;
|
|
} else {
|
|
ieee->group_key_type = KEY_TYPE_NA;
|
|
}
|
|
|
|
if (ieee->group_key_type) {
|
|
setKey(dev, ipw->u.crypt.idx,
|
|
ipw->u.crypt.idx, //KeyIndex
|
|
ieee->group_key_type, //KeyType
|
|
broadcast_addr, //MacAddr
|
|
0, //DefaultKey
|
|
key); //KeyContent
|
|
}
|
|
}
|
|
}
|
|
ret = ieee80211_wpa_supplicant_ioctl(priv->ieee80211, &wrq->u.data);
|
|
break;
|
|
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
kfree(ipw);
|
|
ipw = NULL;
|
|
out:
|
|
up(&priv->wx_sem);
|
|
return ret;
|
|
}
|
|
|
|
static u8 HwRateToMRate90(bool bIsHT, u8 rate)
|
|
{
|
|
u8 ret_rate = 0xff;
|
|
|
|
if (!bIsHT) {
|
|
switch (rate) {
|
|
case DESC90_RATE1M:
|
|
ret_rate = MGN_1M;
|
|
break;
|
|
case DESC90_RATE2M:
|
|
ret_rate = MGN_2M;
|
|
break;
|
|
case DESC90_RATE5_5M:
|
|
ret_rate = MGN_5_5M;
|
|
break;
|
|
case DESC90_RATE11M:
|
|
ret_rate = MGN_11M;
|
|
break;
|
|
case DESC90_RATE6M:
|
|
ret_rate = MGN_6M;
|
|
break;
|
|
case DESC90_RATE9M:
|
|
ret_rate = MGN_9M;
|
|
break;
|
|
case DESC90_RATE12M:
|
|
ret_rate = MGN_12M;
|
|
break;
|
|
case DESC90_RATE18M:
|
|
ret_rate = MGN_18M;
|
|
break;
|
|
case DESC90_RATE24M:
|
|
ret_rate = MGN_24M;
|
|
break;
|
|
case DESC90_RATE36M:
|
|
ret_rate = MGN_36M;
|
|
break;
|
|
case DESC90_RATE48M:
|
|
ret_rate = MGN_48M;
|
|
break;
|
|
case DESC90_RATE54M:
|
|
ret_rate = MGN_54M;
|
|
break;
|
|
|
|
default:
|
|
ret_rate = 0xff;
|
|
RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
|
|
break;
|
|
}
|
|
|
|
} else {
|
|
switch (rate) {
|
|
case DESC90_RATEMCS0:
|
|
ret_rate = MGN_MCS0;
|
|
break;
|
|
case DESC90_RATEMCS1:
|
|
ret_rate = MGN_MCS1;
|
|
break;
|
|
case DESC90_RATEMCS2:
|
|
ret_rate = MGN_MCS2;
|
|
break;
|
|
case DESC90_RATEMCS3:
|
|
ret_rate = MGN_MCS3;
|
|
break;
|
|
case DESC90_RATEMCS4:
|
|
ret_rate = MGN_MCS4;
|
|
break;
|
|
case DESC90_RATEMCS5:
|
|
ret_rate = MGN_MCS5;
|
|
break;
|
|
case DESC90_RATEMCS6:
|
|
ret_rate = MGN_MCS6;
|
|
break;
|
|
case DESC90_RATEMCS7:
|
|
ret_rate = MGN_MCS7;
|
|
break;
|
|
case DESC90_RATEMCS8:
|
|
ret_rate = MGN_MCS8;
|
|
break;
|
|
case DESC90_RATEMCS9:
|
|
ret_rate = MGN_MCS9;
|
|
break;
|
|
case DESC90_RATEMCS10:
|
|
ret_rate = MGN_MCS10;
|
|
break;
|
|
case DESC90_RATEMCS11:
|
|
ret_rate = MGN_MCS11;
|
|
break;
|
|
case DESC90_RATEMCS12:
|
|
ret_rate = MGN_MCS12;
|
|
break;
|
|
case DESC90_RATEMCS13:
|
|
ret_rate = MGN_MCS13;
|
|
break;
|
|
case DESC90_RATEMCS14:
|
|
ret_rate = MGN_MCS14;
|
|
break;
|
|
case DESC90_RATEMCS15:
|
|
ret_rate = MGN_MCS15;
|
|
break;
|
|
case DESC90_RATEMCS32:
|
|
ret_rate = 0x80|0x20;
|
|
break;
|
|
|
|
default:
|
|
ret_rate = 0xff;
|
|
RT_TRACE(COMP_RECV, "HwRateToMRate90(): Non supported Rate [%x], bIsHT = %d!!!\n", rate, bIsHT);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret_rate;
|
|
}
|
|
|
|
/**
|
|
* Function: UpdateRxPktTimeStamp
|
|
* Overview: Record the TSF time stamp when receiving a packet
|
|
*
|
|
* Input:
|
|
* PADAPTER Adapter
|
|
* PRT_RFD pRfd,
|
|
*
|
|
* Output:
|
|
* PRT_RFD pRfd
|
|
* (pRfd->Status.TimeStampHigh is updated)
|
|
* (pRfd->Status.TimeStampLow is updated)
|
|
* Return:
|
|
* None
|
|
*/
|
|
static void UpdateRxPktTimeStamp8190(struct net_device *dev,
|
|
struct ieee80211_rx_stats *stats)
|
|
{
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
|
|
if (stats->bIsAMPDU && !stats->bFirstMPDU) {
|
|
stats->mac_time[0] = priv->LastRxDescTSFLow;
|
|
stats->mac_time[1] = priv->LastRxDescTSFHigh;
|
|
} else {
|
|
priv->LastRxDescTSFLow = stats->mac_time[0];
|
|
priv->LastRxDescTSFHigh = stats->mac_time[1];
|
|
}
|
|
}
|
|
|
|
//by amy 080606
|
|
|
|
static long rtl819x_translate_todbm(u8 signal_strength_index)// 0-100 index.
|
|
{
|
|
long signal_power; // in dBm.
|
|
|
|
// Translate to dBm (x=0.5y-95).
|
|
signal_power = (long)((signal_strength_index + 1) >> 1);
|
|
signal_power -= 95;
|
|
|
|
return signal_power;
|
|
}
|
|
|
|
|
|
/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to
|
|
be a local static. Otherwise, it may increase when we return from S3/S4. The
|
|
value will be kept in memory or disk. Declare the value in the adaptor
|
|
and it will be reinitialized when returned from S3/S4. */
|
|
static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
|
|
struct ieee80211_rx_stats *pprevious_stats,
|
|
struct ieee80211_rx_stats *pcurrent_stats)
|
|
{
|
|
bool bcheck = false;
|
|
u8 rfpath;
|
|
u32 nspatial_stream, tmp_val;
|
|
static u32 slide_rssi_index, slide_rssi_statistics;
|
|
static u32 slide_evm_index, slide_evm_statistics;
|
|
static u32 last_rssi, last_evm;
|
|
|
|
static u32 slide_beacon_adc_pwdb_index, slide_beacon_adc_pwdb_statistics;
|
|
static u32 last_beacon_adc_pwdb;
|
|
|
|
struct rtl_80211_hdr_3addr *hdr;
|
|
u16 sc;
|
|
unsigned int frag, seq;
|
|
hdr = (struct rtl_80211_hdr_3addr *)buffer;
|
|
sc = le16_to_cpu(hdr->seq_ctl);
|
|
frag = WLAN_GET_SEQ_FRAG(sc);
|
|
seq = WLAN_GET_SEQ_SEQ(sc);
|
|
//cosa add 04292008 to record the sequence number
|
|
pcurrent_stats->Seq_Num = seq;
|
|
//
|
|
// Check whether we should take the previous packet into accounting
|
|
//
|
|
if (!pprevious_stats->bIsAMPDU) {
|
|
// if previous packet is not aggregated packet
|
|
bcheck = true;
|
|
}
|
|
|
|
if (slide_rssi_statistics++ >= PHY_RSSI_SLID_WIN_MAX) {
|
|
slide_rssi_statistics = PHY_RSSI_SLID_WIN_MAX;
|
|
last_rssi = priv->stats.slide_signal_strength[slide_rssi_index];
|
|
priv->stats.slide_rssi_total -= last_rssi;
|
|
}
|
|
priv->stats.slide_rssi_total += pprevious_stats->SignalStrength;
|
|
|
|
priv->stats.slide_signal_strength[slide_rssi_index++] = pprevious_stats->SignalStrength;
|
|
if (slide_rssi_index >= PHY_RSSI_SLID_WIN_MAX)
|
|
slide_rssi_index = 0;
|
|
|
|
// <1> Showed on UI for user, in dbm
|
|
tmp_val = priv->stats.slide_rssi_total/slide_rssi_statistics;
|
|
priv->stats.signal_strength = rtl819x_translate_todbm((u8)tmp_val);
|
|
pcurrent_stats->rssi = priv->stats.signal_strength;
|
|
//
|
|
// If the previous packet does not match the criteria, neglect it
|
|
//
|
|
if (!pprevious_stats->bPacketMatchBSSID) {
|
|
if (!pprevious_stats->bToSelfBA)
|
|
return;
|
|
}
|
|
|
|
if (!bcheck)
|
|
return;
|
|
|
|
|
|
//rtl8190_process_cck_rxpathsel(priv,pprevious_stats);//only rtl8190 supported
|
|
|
|
//
|
|
// Check RSSI
|
|
//
|
|
priv->stats.num_process_phyinfo++;
|
|
|
|
/* record the general signal strength to the sliding window. */
|
|
|
|
|
|
// <2> Showed on UI for engineering
|
|
// hardware does not provide rssi information for each rf path in CCK
|
|
if (!pprevious_stats->bIsCCK && (pprevious_stats->bPacketToSelf || pprevious_stats->bToSelfBA)) {
|
|
for (rfpath = RF90_PATH_A; rfpath < priv->NumTotalRFPath; rfpath++) {
|
|
if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, rfpath))
|
|
continue;
|
|
|
|
//Fixed by Jacken 2008-03-20
|
|
if (priv->stats.rx_rssi_percentage[rfpath] == 0)
|
|
priv->stats.rx_rssi_percentage[rfpath] = pprevious_stats->RxMIMOSignalStrength[rfpath];
|
|
if (pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath]) {
|
|
priv->stats.rx_rssi_percentage[rfpath] =
|
|
((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
|
|
(pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
|
|
priv->stats.rx_rssi_percentage[rfpath] = priv->stats.rx_rssi_percentage[rfpath] + 1;
|
|
} else {
|
|
priv->stats.rx_rssi_percentage[rfpath] =
|
|
((priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) +
|
|
(pprevious_stats->RxMIMOSignalStrength[rfpath])) /(Rx_Smooth_Factor);
|
|
}
|
|
RT_TRACE(COMP_DBG, "priv->stats.rx_rssi_percentage[rfPath] = %d \n", priv->stats.rx_rssi_percentage[rfpath]);
|
|
}
|
|
}
|
|
|
|
|
|
//
|
|
// Check PWDB.
|
|
//
|
|
RT_TRACE(COMP_RXDESC, "Smooth %s PWDB = %d\n",
|
|
pprevious_stats->bIsCCK ? "CCK" : "OFDM",
|
|
pprevious_stats->RxPWDBAll);
|
|
|
|
if (pprevious_stats->bPacketBeacon) {
|
|
/* record the beacon pwdb to the sliding window. */
|
|
if (slide_beacon_adc_pwdb_statistics++ >= PHY_Beacon_RSSI_SLID_WIN_MAX) {
|
|
slide_beacon_adc_pwdb_statistics = PHY_Beacon_RSSI_SLID_WIN_MAX;
|
|
last_beacon_adc_pwdb = priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index];
|
|
priv->stats.Slide_Beacon_Total -= last_beacon_adc_pwdb;
|
|
}
|
|
priv->stats.Slide_Beacon_Total += pprevious_stats->RxPWDBAll;
|
|
priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index] = pprevious_stats->RxPWDBAll;
|
|
slide_beacon_adc_pwdb_index++;
|
|
if (slide_beacon_adc_pwdb_index >= PHY_Beacon_RSSI_SLID_WIN_MAX)
|
|
slide_beacon_adc_pwdb_index = 0;
|
|
pprevious_stats->RxPWDBAll = priv->stats.Slide_Beacon_Total/slide_beacon_adc_pwdb_statistics;
|
|
if (pprevious_stats->RxPWDBAll >= 3)
|
|
pprevious_stats->RxPWDBAll -= 3;
|
|
}
|
|
|
|
RT_TRACE(COMP_RXDESC, "Smooth %s PWDB = %d\n",
|
|
pprevious_stats->bIsCCK ? "CCK" : "OFDM",
|
|
pprevious_stats->RxPWDBAll);
|
|
|
|
|
|
if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
|
|
if (priv->undecorated_smoothed_pwdb < 0) /* initialize */
|
|
priv->undecorated_smoothed_pwdb = pprevious_stats->RxPWDBAll;
|
|
if (pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb) {
|
|
priv->undecorated_smoothed_pwdb =
|
|
(((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
|
|
(pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
|
|
priv->undecorated_smoothed_pwdb = priv->undecorated_smoothed_pwdb + 1;
|
|
} else {
|
|
priv->undecorated_smoothed_pwdb =
|
|
(((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) +
|
|
(pprevious_stats->RxPWDBAll)) /(Rx_Smooth_Factor);
|
|
}
|
|
|
|
}
|
|
|
|
//
|
|
// Check EVM
|
|
//
|
|
/* record the general EVM to the sliding window. */
|
|
if (pprevious_stats->SignalQuality) {
|
|
if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
|
|
if (slide_evm_statistics++ >= PHY_RSSI_SLID_WIN_MAX) {
|
|
slide_evm_statistics = PHY_RSSI_SLID_WIN_MAX;
|
|
last_evm = priv->stats.slide_evm[slide_evm_index];
|
|
priv->stats.slide_evm_total -= last_evm;
|
|
}
|
|
|
|
priv->stats.slide_evm_total += pprevious_stats->SignalQuality;
|
|
|
|
priv->stats.slide_evm[slide_evm_index++] = pprevious_stats->SignalQuality;
|
|
if (slide_evm_index >= PHY_RSSI_SLID_WIN_MAX)
|
|
slide_evm_index = 0;
|
|
|
|
// <1> Showed on UI for user, in percentage.
|
|
tmp_val = priv->stats.slide_evm_total/slide_evm_statistics;
|
|
priv->stats.signal_quality = tmp_val;
|
|
//cosa add 10/11/2007, Showed on UI for user in Windows Vista, for Link quality.
|
|
priv->stats.last_signal_strength_inpercent = tmp_val;
|
|
}
|
|
|
|
// <2> Showed on UI for engineering
|
|
if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) {
|
|
for (nspatial_stream = 0; nspatial_stream < 2; nspatial_stream++) { /* 2 spatial stream */
|
|
if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) {
|
|
if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) /* initialize */
|
|
priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream];
|
|
priv->stats.rx_evm_percentage[nspatial_stream] =
|
|
((priv->stats.rx_evm_percentage[nspatial_stream]* (Rx_Smooth_Factor-1)) +
|
|
(pprevious_stats->RxMIMOSignalQuality[nspatial_stream]* 1)) / (Rx_Smooth_Factor);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: rtl819x_query_rxpwrpercentage()
|
|
*
|
|
* Overview:
|
|
*
|
|
* Input: char antpower
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: 0-100 percentage
|
|
*
|
|
* Revised History:
|
|
* When Who Remark
|
|
* 05/26/2008 amy Create Version 0 porting from windows code.
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
static u8 rtl819x_query_rxpwrpercentage(char antpower)
|
|
{
|
|
if ((antpower <= -100) || (antpower >= 20))
|
|
return 0;
|
|
else if (antpower >= 0)
|
|
return 100;
|
|
else
|
|
return 100 + antpower;
|
|
|
|
} /* QueryRxPwrPercentage */
|
|
|
|
static u8 rtl819x_evm_dbtopercentage(char value)
|
|
{
|
|
char ret_val;
|
|
|
|
ret_val = value;
|
|
|
|
if (ret_val >= 0)
|
|
ret_val = 0;
|
|
if (ret_val <= -33)
|
|
ret_val = -33;
|
|
ret_val = 0 - ret_val;
|
|
ret_val *= 3;
|
|
if (ret_val == 99)
|
|
ret_val = 100;
|
|
return ret_val;
|
|
}
|
|
//
|
|
// Description:
|
|
// We want good-looking for signal strength/quality
|
|
// 2007/7/19 01:09, by cosa.
|
|
//
|
|
static long rtl819x_signal_scale_mapping(long currsig)
|
|
{
|
|
long retsig;
|
|
|
|
// Step 1. Scale mapping.
|
|
if (currsig >= 61 && currsig <= 100)
|
|
retsig = 90 + ((currsig - 60) / 4);
|
|
else if (currsig >= 41 && currsig <= 60)
|
|
retsig = 78 + ((currsig - 40) / 2);
|
|
else if (currsig >= 31 && currsig <= 40)
|
|
retsig = 66 + (currsig - 30);
|
|
else if (currsig >= 21 && currsig <= 30)
|
|
retsig = 54 + (currsig - 20);
|
|
else if (currsig >= 5 && currsig <= 20)
|
|
retsig = 42 + (((currsig - 5) * 2) / 3);
|
|
else if (currsig == 4)
|
|
retsig = 36;
|
|
else if (currsig == 3)
|
|
retsig = 27;
|
|
else if (currsig == 2)
|
|
retsig = 18;
|
|
else if (currsig == 1)
|
|
retsig = 9;
|
|
else
|
|
retsig = currsig;
|
|
|
|
return retsig;
|
|
}
|
|
|
|
static inline bool rx_hal_is_cck_rate(struct rx_drvinfo_819x_usb *pdrvinfo)
|
|
{
|
|
if (pdrvinfo->RxHT)
|
|
return false;
|
|
|
|
switch (pdrvinfo->RxRate) {
|
|
case DESC90_RATE1M:
|
|
case DESC90_RATE2M:
|
|
case DESC90_RATE5_5M:
|
|
case DESC90_RATE11M:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void rtl8192_query_rxphystatus(struct r8192_priv *priv,
|
|
struct ieee80211_rx_stats *pstats,
|
|
rx_drvinfo_819x_usb *pdrvinfo,
|
|
struct ieee80211_rx_stats *precord_stats,
|
|
bool bpacket_match_bssid,
|
|
bool bpacket_toself,
|
|
bool bPacketBeacon,
|
|
bool bToSelfBA)
|
|
{
|
|
phy_sts_ofdm_819xusb_t *pofdm_buf;
|
|
phy_sts_cck_819xusb_t *pcck_buf;
|
|
phy_ofdm_rx_status_rxsc_sgien_exintfflag *prxsc;
|
|
u8 *prxpkt;
|
|
u8 i, max_spatial_stream, tmp_rxsnr, tmp_rxevm, rxsc_sgien_exflg;
|
|
char rx_pwr[4], rx_pwr_all = 0;
|
|
char rx_snrX, rx_evmX;
|
|
u8 evm, pwdb_all;
|
|
u32 RSSI, total_rssi = 0;
|
|
u8 is_cck_rate = 0;
|
|
u8 rf_rx_num = 0;
|
|
u8 sq;
|
|
|
|
|
|
priv->stats.numqry_phystatus++;
|
|
|
|
is_cck_rate = rx_hal_is_cck_rate(pdrvinfo);
|
|
|
|
// Record it for next packet processing
|
|
memset(precord_stats, 0, sizeof(struct ieee80211_rx_stats));
|
|
pstats->bPacketMatchBSSID = precord_stats->bPacketMatchBSSID = bpacket_match_bssid;
|
|
pstats->bPacketToSelf = precord_stats->bPacketToSelf = bpacket_toself;
|
|
pstats->bIsCCK = precord_stats->bIsCCK = is_cck_rate;
|
|
pstats->bPacketBeacon = precord_stats->bPacketBeacon = bPacketBeacon;
|
|
pstats->bToSelfBA = precord_stats->bToSelfBA = bToSelfBA;
|
|
|
|
prxpkt = (u8 *)pdrvinfo;
|
|
|
|
/* Move pointer to the 16th bytes. Phy status start address. */
|
|
prxpkt += sizeof(rx_drvinfo_819x_usb);
|
|
|
|
/* Initial the cck and ofdm buffer pointer */
|
|
pcck_buf = (phy_sts_cck_819xusb_t *)prxpkt;
|
|
pofdm_buf = (phy_sts_ofdm_819xusb_t *)prxpkt;
|
|
|
|
pstats->RxMIMOSignalQuality[0] = -1;
|
|
pstats->RxMIMOSignalQuality[1] = -1;
|
|
precord_stats->RxMIMOSignalQuality[0] = -1;
|
|
precord_stats->RxMIMOSignalQuality[1] = -1;
|
|
|
|
if (is_cck_rate) {
|
|
//
|
|
// (1)Hardware does not provide RSSI for CCK
|
|
//
|
|
|
|
//
|
|
// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
|
|
//
|
|
u8 report;
|
|
|
|
priv->stats.numqry_phystatusCCK++;
|
|
|
|
if (!priv->bCckHighPower) {
|
|
report = pcck_buf->cck_agc_rpt & 0xc0;
|
|
report >>= 6;
|
|
switch (report) {
|
|
//Fixed by Jacken from Bryant 2008-03-20
|
|
//Original value is -38 , -26 , -14 , -2
|
|
//Fixed value is -35 , -23 , -11 , 6
|
|
case 0x3:
|
|
rx_pwr_all = -35 - (pcck_buf->cck_agc_rpt & 0x3e);
|
|
break;
|
|
case 0x2:
|
|
rx_pwr_all = -23 - (pcck_buf->cck_agc_rpt & 0x3e);
|
|
break;
|
|
case 0x1:
|
|
rx_pwr_all = -11 - (pcck_buf->cck_agc_rpt & 0x3e);
|
|
break;
|
|
case 0x0:
|
|
rx_pwr_all = 6 - (pcck_buf->cck_agc_rpt & 0x3e);
|
|
break;
|
|
}
|
|
} else {
|
|
report = pcck_buf->cck_agc_rpt & 0x60;
|
|
report >>= 5;
|
|
switch (report) {
|
|
case 0x3:
|
|
rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
|
|
break;
|
|
case 0x2:
|
|
rx_pwr_all = -23 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
|
|
break;
|
|
case 0x1:
|
|
rx_pwr_all = -11 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
|
|
break;
|
|
case 0x0:
|
|
rx_pwr_all = 6 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
|
|
pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
|
|
pstats->RecvSignalPower = pwdb_all;
|
|
|
|
//
|
|
// (3) Get Signal Quality (EVM)
|
|
//
|
|
|
|
if (pstats->RxPWDBAll > 40) {
|
|
sq = 100;
|
|
} else {
|
|
sq = pcck_buf->sq_rpt;
|
|
|
|
if (pcck_buf->sq_rpt > 64)
|
|
sq = 0;
|
|
else if (pcck_buf->sq_rpt < 20)
|
|
sq = 100;
|
|
else
|
|
sq = ((64-sq) * 100) / 44;
|
|
}
|
|
pstats->SignalQuality = precord_stats->SignalQuality = sq;
|
|
pstats->RxMIMOSignalQuality[0] = precord_stats->RxMIMOSignalQuality[0] = sq;
|
|
pstats->RxMIMOSignalQuality[1] = precord_stats->RxMIMOSignalQuality[1] = -1;
|
|
|
|
} else {
|
|
priv->stats.numqry_phystatusHT++;
|
|
//
|
|
// (1)Get RSSI for HT rate
|
|
//
|
|
for (i = RF90_PATH_A; i < priv->NumTotalRFPath; i++) {
|
|
// 2008/01/30 MH we will judge RF RX path now.
|
|
if (priv->brfpath_rxenable[i])
|
|
rf_rx_num++;
|
|
else
|
|
continue;
|
|
|
|
if (!rtl8192_phy_CheckIsLegalRFPath(priv->ieee80211->dev, i))
|
|
continue;
|
|
|
|
//Fixed by Jacken from Bryant 2008-03-20
|
|
//Original value is 106
|
|
rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i]&0x3F)*2) - 106;
|
|
|
|
//Get Rx snr value in DB
|
|
tmp_rxsnr = pofdm_buf->rxsnr_X[i];
|
|
rx_snrX = (char)(tmp_rxsnr);
|
|
rx_snrX /= 2;
|
|
priv->stats.rxSNRdB[i] = (long)rx_snrX;
|
|
|
|
/* Translate DBM to percentage. */
|
|
RSSI = rtl819x_query_rxpwrpercentage(rx_pwr[i]);
|
|
total_rssi += RSSI;
|
|
|
|
/* Record Signal Strength for next packet */
|
|
pstats->RxMIMOSignalStrength[i] = (u8) RSSI;
|
|
precord_stats->RxMIMOSignalStrength[i] = (u8) RSSI;
|
|
}
|
|
|
|
|
|
//
|
|
// (2)PWDB, Average PWDB cacluated by hardware (for rate adaptive)
|
|
//
|
|
//Fixed by Jacken from Bryant 2008-03-20
|
|
//Original value is 106
|
|
rx_pwr_all = (((pofdm_buf->pwdb_all) >> 1)& 0x7f) -106;
|
|
pwdb_all = rtl819x_query_rxpwrpercentage(rx_pwr_all);
|
|
|
|
pstats->RxPWDBAll = precord_stats->RxPWDBAll = pwdb_all;
|
|
pstats->RxPower = precord_stats->RxPower = rx_pwr_all;
|
|
|
|
//
|
|
// (3)EVM of HT rate
|
|
//
|
|
if (pdrvinfo->RxHT && pdrvinfo->RxRate >= DESC90_RATEMCS8 &&
|
|
pdrvinfo->RxRate <= DESC90_RATEMCS15)
|
|
max_spatial_stream = 2; //both spatial stream make sense
|
|
else
|
|
max_spatial_stream = 1; //only spatial stream 1 makes sense
|
|
|
|
for (i = 0; i < max_spatial_stream; i++) {
|
|
tmp_rxevm = pofdm_buf->rxevm_X[i];
|
|
rx_evmX = (char)(tmp_rxevm);
|
|
|
|
// Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment
|
|
// will set the most significant bit to "zero" when doing shifting operation which may change a negative
|
|
// value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
|
|
rx_evmX /= 2; //dbm
|
|
|
|
evm = rtl819x_evm_dbtopercentage(rx_evmX);
|
|
if (i == 0) /* Fill value in RFD, Get the first spatial stream only */
|
|
pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff);
|
|
pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff);
|
|
}
|
|
|
|
|
|
/* record rx statistics for debug */
|
|
rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg;
|
|
prxsc = (phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg;
|
|
if (pdrvinfo->BW) /* 40M channel */
|
|
priv->stats.received_bwtype[1+prxsc->rxsc]++;
|
|
else //20M channel
|
|
priv->stats.received_bwtype[0]++;
|
|
}
|
|
|
|
//UI BSS List signal strength(in percentage), make it good looking, from 0~100.
|
|
//It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp().
|
|
if (is_cck_rate) {
|
|
pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));
|
|
} else {
|
|
// We can judge RX path number now.
|
|
if (rf_rx_num != 0)
|
|
pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)(total_rssi /= rf_rx_num)));
|
|
}
|
|
} /* QueryRxPhyStatus8190Pci */
|
|
|
|
static void rtl8192_record_rxdesc_forlateruse(struct ieee80211_rx_stats *psrc_stats,
|
|
struct ieee80211_rx_stats *ptarget_stats)
|
|
{
|
|
ptarget_stats->bIsAMPDU = psrc_stats->bIsAMPDU;
|
|
ptarget_stats->bFirstMPDU = psrc_stats->bFirstMPDU;
|
|
ptarget_stats->Seq_Num = psrc_stats->Seq_Num;
|
|
}
|
|
|
|
|
|
static void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
|
|
struct ieee80211_rx_stats *pstats,
|
|
rx_drvinfo_819x_usb *pdrvinfo)
|
|
{
|
|
// TODO: We must only check packet for current MAC address. Not finish
|
|
rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
|
|
struct net_device *dev = info->dev;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
bool bpacket_match_bssid, bpacket_toself;
|
|
bool bPacketBeacon = false, bToSelfBA = false;
|
|
static struct ieee80211_rx_stats previous_stats;
|
|
struct rtl_80211_hdr_3addr *hdr;//by amy
|
|
u16 fc, type;
|
|
|
|
// Get Signal Quality for only RX data queue (but not command queue)
|
|
|
|
u8 *tmp_buf;
|
|
u8 *praddr;
|
|
|
|
/* Get MAC frame start address. */
|
|
tmp_buf = (u8 *)skb->data;
|
|
|
|
hdr = (struct rtl_80211_hdr_3addr *)tmp_buf;
|
|
fc = le16_to_cpu(hdr->frame_ctl);
|
|
type = WLAN_FC_GET_TYPE(fc);
|
|
praddr = hdr->addr1;
|
|
|
|
/* Check if the received packet is acceptable. */
|
|
bpacket_match_bssid = (IEEE80211_FTYPE_CTL != type) &&
|
|
(eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS) ? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS) ? hdr->addr2 : hdr->addr3))
|
|
&& (!pstats->bHwError) && (!pstats->bCRC) && (!pstats->bICV);
|
|
bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr));
|
|
|
|
if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BEACON)
|
|
bPacketBeacon = true;
|
|
if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK) {
|
|
if ((eqMacAddr(praddr, dev->dev_addr)))
|
|
bToSelfBA = true;
|
|
}
|
|
|
|
|
|
|
|
if (bpacket_match_bssid)
|
|
priv->stats.numpacket_matchbssid++;
|
|
if (bpacket_toself)
|
|
priv->stats.numpacket_toself++;
|
|
//
|
|
// Process PHY information for previous packet (RSSI/PWDB/EVM)
|
|
//
|
|
// Because phy information is contained in the last packet of AMPDU only, so driver
|
|
// should process phy information of previous packet
|
|
rtl8192_process_phyinfo(priv, tmp_buf, &previous_stats, pstats);
|
|
rtl8192_query_rxphystatus(priv, pstats, pdrvinfo, &previous_stats, bpacket_match_bssid, bpacket_toself, bPacketBeacon, bToSelfBA);
|
|
rtl8192_record_rxdesc_forlateruse(pstats, &previous_stats);
|
|
|
|
}
|
|
|
|
/**
|
|
* Function: UpdateReceivedRateHistogramStatistics
|
|
* Overview: Record the received data rate
|
|
*
|
|
* Input:
|
|
* struct net_device *dev
|
|
* struct ieee80211_rx_stats *stats
|
|
*
|
|
* Output:
|
|
*
|
|
* (priv->stats.ReceivedRateHistogram[] is updated)
|
|
* Return:
|
|
* None
|
|
*/
|
|
static void
|
|
UpdateReceivedRateHistogramStatistics8190(struct net_device *dev,
|
|
struct ieee80211_rx_stats *stats)
|
|
{
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
u32 rcvType = 1; //0: Total, 1:OK, 2:CRC, 3:ICV
|
|
u32 rateIndex;
|
|
u32 preamble_guardinterval; //1: short preamble/GI, 0: long preamble/GI
|
|
|
|
|
|
if (stats->bCRC)
|
|
rcvType = 2;
|
|
else if (stats->bICV)
|
|
rcvType = 3;
|
|
|
|
if (stats->bShortPreamble)
|
|
preamble_guardinterval = 1;// short
|
|
else
|
|
preamble_guardinterval = 0;// long
|
|
|
|
switch (stats->rate) {
|
|
/* CCK rate */
|
|
case MGN_1M:
|
|
rateIndex = 0;
|
|
break;
|
|
case MGN_2M:
|
|
rateIndex = 1;
|
|
break;
|
|
case MGN_5_5M:
|
|
rateIndex = 2;
|
|
break;
|
|
case MGN_11M:
|
|
rateIndex = 3;
|
|
break;
|
|
/* Legacy OFDM rate */
|
|
case MGN_6M:
|
|
rateIndex = 4;
|
|
break;
|
|
case MGN_9M:
|
|
rateIndex = 5;
|
|
break;
|
|
case MGN_12M:
|
|
rateIndex = 6;
|
|
break;
|
|
case MGN_18M:
|
|
rateIndex = 7;
|
|
break;
|
|
case MGN_24M:
|
|
rateIndex = 8;
|
|
break;
|
|
case MGN_36M:
|
|
rateIndex = 9;
|
|
break;
|
|
case MGN_48M:
|
|
rateIndex = 10;
|
|
break;
|
|
case MGN_54M:
|
|
rateIndex = 11;
|
|
break;
|
|
/* 11n High throughput rate */
|
|
case MGN_MCS0:
|
|
rateIndex = 12;
|
|
break;
|
|
case MGN_MCS1:
|
|
rateIndex = 13;
|
|
break;
|
|
case MGN_MCS2:
|
|
rateIndex = 14;
|
|
break;
|
|
case MGN_MCS3:
|
|
rateIndex = 15;
|
|
break;
|
|
case MGN_MCS4:
|
|
rateIndex = 16;
|
|
break;
|
|
case MGN_MCS5:
|
|
rateIndex = 17;
|
|
break;
|
|
case MGN_MCS6:
|
|
rateIndex = 18;
|
|
break;
|
|
case MGN_MCS7:
|
|
rateIndex = 19;
|
|
break;
|
|
case MGN_MCS8:
|
|
rateIndex = 20;
|
|
break;
|
|
case MGN_MCS9:
|
|
rateIndex = 21;
|
|
break;
|
|
case MGN_MCS10:
|
|
rateIndex = 22;
|
|
break;
|
|
case MGN_MCS11:
|
|
rateIndex = 23;
|
|
break;
|
|
case MGN_MCS12:
|
|
rateIndex = 24;
|
|
break;
|
|
case MGN_MCS13:
|
|
rateIndex = 25;
|
|
break;
|
|
case MGN_MCS14:
|
|
rateIndex = 26;
|
|
break;
|
|
case MGN_MCS15:
|
|
rateIndex = 27;
|
|
break;
|
|
default:
|
|
rateIndex = 28;
|
|
break;
|
|
}
|
|
priv->stats.received_preamble_GI[preamble_guardinterval][rateIndex]++;
|
|
priv->stats.received_rate_histogram[0][rateIndex]++; //total
|
|
priv->stats.received_rate_histogram[rcvType][rateIndex]++;
|
|
}
|
|
|
|
|
|
static void query_rxdesc_status(struct sk_buff *skb,
|
|
struct ieee80211_rx_stats *stats,
|
|
bool bIsRxAggrSubframe)
|
|
{
|
|
rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
|
|
struct net_device *dev = info->dev;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
rx_drvinfo_819x_usb *driver_info = NULL;
|
|
|
|
//
|
|
//Get Rx Descriptor Information
|
|
//
|
|
rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
|
|
|
|
stats->Length = desc->Length;
|
|
stats->RxDrvInfoSize = desc->RxDrvInfoSize;
|
|
stats->RxBufShift = 0;
|
|
stats->bICV = desc->ICV;
|
|
stats->bCRC = desc->CRC32;
|
|
stats->bHwError = stats->bCRC|stats->bICV;
|
|
/* RTL8190 set this bit to indicate that Hw does not decrypt packet */
|
|
stats->Decrypted = !desc->SWDec;
|
|
|
|
if ((priv->ieee80211->pHTInfo->bCurrentHTSupport) &&
|
|
(priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP))
|
|
stats->bHwError = false;
|
|
else
|
|
stats->bHwError = stats->bCRC|stats->bICV;
|
|
|
|
if (stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE)
|
|
stats->bHwError |= 1;
|
|
//
|
|
//Get Driver Info
|
|
//
|
|
// TODO: Need to verify it on FGPA platform
|
|
//Driver info are written to the RxBuffer following rx desc
|
|
if (stats->RxDrvInfoSize != 0) {
|
|
driver_info = (rx_drvinfo_819x_usb *)(skb->data + sizeof(rx_desc_819x_usb) +
|
|
stats->RxBufShift);
|
|
/* unit: 0.5M */
|
|
/* TODO */
|
|
if (!stats->bHwError) {
|
|
u8 ret_rate;
|
|
ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate);
|
|
if (ret_rate == 0xff) {
|
|
// Abnormal Case: Receive CRC OK packet with Rx descriptor indicating non supported rate.
|
|
// Special Error Handling here, 2008.05.16, by Emily
|
|
|
|
stats->bHwError = 1;
|
|
stats->rate = MGN_1M; //Set 1M rate by default
|
|
} else {
|
|
stats->rate = ret_rate;
|
|
}
|
|
} else {
|
|
stats->rate = 0x02;
|
|
}
|
|
|
|
stats->bShortPreamble = driver_info->SPLCP;
|
|
|
|
|
|
UpdateReceivedRateHistogramStatistics8190(dev, stats);
|
|
|
|
stats->bIsAMPDU = (driver_info->PartAggr == 1);
|
|
stats->bFirstMPDU = (driver_info->PartAggr == 1) && (driver_info->FirstAGGR == 1);
|
|
stats->TimeStampLow = driver_info->TSFL;
|
|
// xiong mask it, 070514
|
|
|
|
UpdateRxPktTimeStamp8190(dev, stats);
|
|
|
|
//
|
|
// Rx A-MPDU
|
|
//
|
|
if (driver_info->FirstAGGR == 1 || driver_info->PartAggr == 1)
|
|
RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n",
|
|
driver_info->FirstAGGR, driver_info->PartAggr);
|
|
|
|
}
|
|
|
|
skb_pull(skb, sizeof(rx_desc_819x_usb));
|
|
//
|
|
// Get Total offset of MPDU Frame Body
|
|
//
|
|
if ((stats->RxBufShift + stats->RxDrvInfoSize) > 0) {
|
|
stats->bShift = 1;
|
|
skb_pull(skb, stats->RxBufShift + stats->RxDrvInfoSize);
|
|
}
|
|
|
|
if (driver_info) {
|
|
stats->RxIs40MHzPacket = driver_info->BW;
|
|
TranslateRxSignalStuff819xUsb(skb, stats, driver_info);
|
|
}
|
|
}
|
|
|
|
static void rtl8192_rx_nomal(struct sk_buff *skb)
|
|
{
|
|
rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
|
|
struct net_device *dev = info->dev;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct ieee80211_rx_stats stats = {
|
|
.signal = 0,
|
|
.noise = -98,
|
|
.rate = 0,
|
|
.freq = IEEE80211_24GHZ_BAND,
|
|
};
|
|
u32 rx_pkt_len = 0;
|
|
struct rtl_80211_hdr_1addr *ieee80211_hdr = NULL;
|
|
bool unicast_packet = false;
|
|
|
|
/* 20 is for ps-poll */
|
|
if ((skb->len >= (20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) {
|
|
/* first packet should not contain Rx aggregation header */
|
|
query_rxdesc_status(skb, &stats, false);
|
|
/* TODO */
|
|
/* hardware related info */
|
|
/* Process the MPDU received */
|
|
skb_trim(skb, skb->len - 4/*sCrcLng*/);
|
|
|
|
rx_pkt_len = skb->len;
|
|
ieee80211_hdr = (struct rtl_80211_hdr_1addr *)skb->data;
|
|
unicast_packet = false;
|
|
if (is_broadcast_ether_addr(ieee80211_hdr->addr1)) {
|
|
//TODO
|
|
} else if (is_multicast_ether_addr(ieee80211_hdr->addr1)) {
|
|
//TODO
|
|
} else {
|
|
/* unicast packet */
|
|
unicast_packet = true;
|
|
}
|
|
|
|
if (!ieee80211_rx(priv->ieee80211, skb, &stats)) {
|
|
dev_kfree_skb_any(skb);
|
|
} else {
|
|
priv->stats.rxoktotal++;
|
|
if (unicast_packet)
|
|
priv->stats.rxbytesunicast += rx_pkt_len;
|
|
}
|
|
} else {
|
|
priv->stats.rxurberr++;
|
|
netdev_dbg(dev, "actual_length: %d\n", skb->len);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
}
|
|
|
|
static void rtl819xusb_process_received_packet(struct net_device *dev,
|
|
struct ieee80211_rx_stats *pstats)
|
|
{
|
|
u8 *frame;
|
|
u16 frame_len = 0;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
// Get shifted bytes of Starting address of 802.11 header. 2006.09.28, by Emily
|
|
//porting by amy 080508
|
|
pstats->virtual_address += get_rxpacket_shiftbytes_819xusb(pstats);
|
|
frame = pstats->virtual_address;
|
|
frame_len = pstats->packetlength;
|
|
#ifdef TODO // by amy about HCT
|
|
if (!Adapter->bInHctTest)
|
|
CountRxErrStatistics(Adapter, pRfd);
|
|
#endif
|
|
#ifdef ENABLE_PS //by amy for adding ps function in future
|
|
RT_RF_POWER_STATE rtState;
|
|
// When RF is off, we should not count the packet for hw/sw synchronize
|
|
// reason, ie. there may be a duration while sw switch is changed and hw
|
|
// switch is being changed. 2006.12.04, by shien chang.
|
|
Adapter->HalFunc.GetHwRegHandler(Adapter, HW_VAR_RF_STATE, (u8 *)(&rtState));
|
|
if (rtState == eRfOff)
|
|
return;
|
|
#endif
|
|
priv->stats.rxframgment++;
|
|
|
|
#ifdef TODO
|
|
RmMonitorSignalStrength(Adapter, pRfd);
|
|
#endif
|
|
/* 2007/01/16 MH Add RX command packet handle here. */
|
|
/* 2007/03/01 MH We have to release RFD and return if rx pkt is cmd pkt. */
|
|
if (rtl819xusb_rx_command_packet(dev, pstats))
|
|
return;
|
|
|
|
#ifdef SW_CRC_CHECK
|
|
SwCrcCheck();
|
|
#endif
|
|
|
|
|
|
}
|
|
|
|
static void query_rx_cmdpkt_desc_status(struct sk_buff *skb,
|
|
struct ieee80211_rx_stats *stats)
|
|
{
|
|
rx_desc_819x_usb *desc = (rx_desc_819x_usb *)skb->data;
|
|
|
|
//
|
|
//Get Rx Descriptor Information
|
|
//
|
|
stats->virtual_address = (u8 *)skb->data;
|
|
stats->Length = desc->Length;
|
|
stats->RxDrvInfoSize = 0;
|
|
stats->RxBufShift = 0;
|
|
stats->packetlength = stats->Length-scrclng;
|
|
stats->fraglength = stats->packetlength;
|
|
stats->fragoffset = 0;
|
|
stats->ntotalfrag = 1;
|
|
}
|
|
|
|
|
|
static void rtl8192_rx_cmd(struct sk_buff *skb)
|
|
{
|
|
struct rtl8192_rx_info *info = (struct rtl8192_rx_info *)skb->cb;
|
|
struct net_device *dev = info->dev;
|
|
/* TODO */
|
|
struct ieee80211_rx_stats stats = {
|
|
.signal = 0,
|
|
.noise = -98,
|
|
.rate = 0,
|
|
.freq = IEEE80211_24GHZ_BAND,
|
|
};
|
|
|
|
if ((skb->len >= (20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) {
|
|
|
|
query_rx_cmdpkt_desc_status(skb, &stats);
|
|
// this is to be done by amy 080508 prfd->queue_id = 1;
|
|
|
|
|
|
//
|
|
// Process the command packet received.
|
|
//
|
|
|
|
rtl819xusb_process_received_packet(dev, &stats);
|
|
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
}
|
|
|
|
static void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct rtl8192_rx_info *info;
|
|
|
|
while (NULL != (skb = skb_dequeue(&priv->skb_queue))) {
|
|
info = (struct rtl8192_rx_info *)skb->cb;
|
|
switch (info->out_pipe) {
|
|
/* Nomal packet pipe */
|
|
case 3:
|
|
priv->IrpPendingCount--;
|
|
rtl8192_rx_nomal(skb);
|
|
break;
|
|
|
|
/* Command packet pipe */
|
|
case 9:
|
|
RT_TRACE(COMP_RECV, "command in-pipe index(%d)\n",
|
|
info->out_pipe);
|
|
|
|
rtl8192_rx_cmd(skb);
|
|
break;
|
|
|
|
default: /* should never get here! */
|
|
RT_TRACE(COMP_ERR, "Unknown in-pipe index(%d)\n",
|
|
info->out_pipe);
|
|
dev_kfree_skb(skb);
|
|
break;
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
static const struct net_device_ops rtl8192_netdev_ops = {
|
|
.ndo_open = rtl8192_open,
|
|
.ndo_stop = rtl8192_close,
|
|
.ndo_get_stats = rtl8192_stats,
|
|
.ndo_tx_timeout = tx_timeout,
|
|
.ndo_do_ioctl = rtl8192_ioctl,
|
|
.ndo_set_rx_mode = r8192_set_multicast,
|
|
.ndo_set_mac_address = r8192_set_mac_adr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_start_xmit = ieee80211_xmit,
|
|
};
|
|
|
|
|
|
/****************************************************************************
|
|
---------------------------- USB_STUFF---------------------------
|
|
*****************************************************************************/
|
|
|
|
static int rtl8192_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct net_device *dev = NULL;
|
|
struct r8192_priv *priv = NULL;
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
int ret;
|
|
RT_TRACE(COMP_INIT, "Oops: i'm coming\n");
|
|
|
|
dev = alloc_ieee80211(sizeof(struct r8192_priv));
|
|
if (dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
usb_set_intfdata(intf, dev);
|
|
SET_NETDEV_DEV(dev, &intf->dev);
|
|
priv = ieee80211_priv(dev);
|
|
priv->ieee80211 = netdev_priv(dev);
|
|
priv->udev = udev;
|
|
|
|
dev->netdev_ops = &rtl8192_netdev_ops;
|
|
|
|
dev->wireless_handlers = (struct iw_handler_def *) &r8192_wx_handlers_def;
|
|
|
|
dev->type = ARPHRD_ETHER;
|
|
|
|
dev->watchdog_timeo = HZ*3; //modified by john, 0805
|
|
|
|
if (dev_alloc_name(dev, ifname) < 0) {
|
|
RT_TRACE(COMP_INIT, "Oops: devname already taken! Trying wlan%%d...\n");
|
|
ifname = "wlan%d";
|
|
dev_alloc_name(dev, ifname);
|
|
}
|
|
|
|
RT_TRACE(COMP_INIT, "Driver probe completed1\n");
|
|
if (rtl8192_init(dev) != 0) {
|
|
RT_TRACE(COMP_ERR, "Initialization failed");
|
|
ret = -ENODEV;
|
|
goto fail;
|
|
}
|
|
netif_carrier_off(dev);
|
|
netif_stop_queue(dev);
|
|
|
|
ret = register_netdev(dev);
|
|
if (ret)
|
|
goto fail2;
|
|
|
|
RT_TRACE(COMP_INIT, "dev name=======> %s\n", dev->name);
|
|
rtl8192_proc_init_one(dev);
|
|
|
|
|
|
RT_TRACE(COMP_INIT, "Driver probe completed\n");
|
|
return 0;
|
|
|
|
fail2:
|
|
rtl8192_down(dev);
|
|
kfree(priv->pFirmware);
|
|
priv->pFirmware = NULL;
|
|
rtl8192_usb_deleteendpoints(dev);
|
|
destroy_workqueue(priv->priv_wq);
|
|
mdelay(10);
|
|
fail:
|
|
free_ieee80211(dev);
|
|
|
|
RT_TRACE(COMP_ERR, "wlan driver load failed\n");
|
|
return ret;
|
|
}
|
|
|
|
//detach all the work and timer structure declared or inititialize in r8192U_init function.
|
|
static void rtl8192_cancel_deferred_work(struct r8192_priv *priv)
|
|
{
|
|
|
|
cancel_work_sync(&priv->reset_wq);
|
|
cancel_delayed_work(&priv->watch_dog_wq);
|
|
cancel_delayed_work(&priv->update_beacon_wq);
|
|
cancel_work_sync(&priv->qos_activate);
|
|
}
|
|
|
|
|
|
static void rtl8192_usb_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct net_device *dev = usb_get_intfdata(intf);
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
if (dev) {
|
|
|
|
unregister_netdev(dev);
|
|
|
|
RT_TRACE(COMP_DOWN, "=============>wlan driver to be removed\n");
|
|
rtl8192_proc_remove_one(dev);
|
|
|
|
rtl8192_down(dev);
|
|
kfree(priv->pFirmware);
|
|
priv->pFirmware = NULL;
|
|
rtl8192_usb_deleteendpoints(dev);
|
|
destroy_workqueue(priv->priv_wq);
|
|
mdelay(10);
|
|
|
|
}
|
|
free_ieee80211(dev);
|
|
RT_TRACE(COMP_DOWN, "wlan driver removed\n");
|
|
}
|
|
|
|
static int __init rtl8192_usb_module_init(void)
|
|
{
|
|
int ret;
|
|
|
|
#ifdef CONFIG_IEEE80211_DEBUG
|
|
ret = ieee80211_debug_init();
|
|
if (ret) {
|
|
pr_err("ieee80211_debug_init() failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
ret = ieee80211_crypto_init();
|
|
if (ret) {
|
|
pr_err("ieee80211_crypto_init() failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ieee80211_crypto_tkip_init();
|
|
if (ret) {
|
|
pr_err("ieee80211_crypto_tkip_init() failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ieee80211_crypto_ccmp_init();
|
|
if (ret) {
|
|
pr_err("ieee80211_crypto_ccmp_init() failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ieee80211_crypto_wep_init();
|
|
if (ret) {
|
|
pr_err("ieee80211_crypto_wep_init() failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pr_info("\nLinux kernel driver for RTL8192 based WLAN cards\n");
|
|
pr_info("Copyright (c) 2007-2008, Realsil Wlan\n");
|
|
RT_TRACE(COMP_INIT, "Initializing module");
|
|
RT_TRACE(COMP_INIT, "Wireless extensions version %d", WIRELESS_EXT);
|
|
rtl8192_proc_module_init();
|
|
return usb_register(&rtl8192_usb_driver);
|
|
}
|
|
|
|
|
|
static void __exit rtl8192_usb_module_exit(void)
|
|
{
|
|
usb_deregister(&rtl8192_usb_driver);
|
|
|
|
RT_TRACE(COMP_DOWN, "Exiting");
|
|
}
|
|
|
|
|
|
void rtl8192_try_wake_queue(struct net_device *dev, int pri)
|
|
{
|
|
unsigned long flags;
|
|
short enough_desc;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
|
|
spin_lock_irqsave(&priv->tx_lock, flags);
|
|
enough_desc = check_nic_enough_desc(dev, pri);
|
|
spin_unlock_irqrestore(&priv->tx_lock, flags);
|
|
|
|
if (enough_desc)
|
|
ieee80211_wake_queue(priv->ieee80211);
|
|
}
|
|
|
|
void EnableHWSecurityConfig8192(struct net_device *dev)
|
|
{
|
|
u8 SECR_value = 0x0;
|
|
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
|
|
struct ieee80211_device *ieee = priv->ieee80211;
|
|
SECR_value = SCR_TxEncEnable | SCR_RxDecEnable;
|
|
if (((KEY_TYPE_WEP40 == ieee->pairwise_key_type) || (KEY_TYPE_WEP104 == ieee->pairwise_key_type)) && (priv->ieee80211->auth_mode != 2)) {
|
|
SECR_value |= SCR_RxUseDK;
|
|
SECR_value |= SCR_TxUseDK;
|
|
} else if ((ieee->iw_mode == IW_MODE_ADHOC) && (ieee->pairwise_key_type & (KEY_TYPE_CCMP | KEY_TYPE_TKIP))) {
|
|
SECR_value |= SCR_RxUseDK;
|
|
SECR_value |= SCR_TxUseDK;
|
|
}
|
|
//add HWSec active enable here.
|
|
//default using hwsec. when peer AP is in N mode only and pairwise_key_type is none_aes(which HT_IOT_ACT_PURE_N_MODE indicates it), use software security. when peer AP is in b,g,n mode mixed and pairwise_key_type is none_aes, use g mode hw security. WB on 2008.7.4
|
|
|
|
ieee->hwsec_active = 1;
|
|
|
|
if ((ieee->pHTInfo->IOTAction&HT_IOT_ACT_PURE_N_MODE) || !hwwep) { /* add hwsec_support flag to totol control hw_sec on/off */
|
|
ieee->hwsec_active = 0;
|
|
SECR_value &= ~SCR_RxDecEnable;
|
|
}
|
|
RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __func__,
|
|
ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
|
|
write_nic_byte(dev, SECR, SECR_value);
|
|
}
|
|
|
|
|
|
void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
|
|
u8 *MacAddr, u8 DefaultKey, u32 *KeyContent)
|
|
{
|
|
u32 TargetCommand = 0;
|
|
u32 TargetContent = 0;
|
|
u16 usConfig = 0;
|
|
u8 i;
|
|
if (EntryNo >= TOTAL_CAM_ENTRY)
|
|
RT_TRACE(COMP_ERR, "cam entry exceeds in setKey()\n");
|
|
|
|
RT_TRACE(COMP_SEC, "====>to setKey(), dev:%p, EntryNo:%d, KeyIndex:%d, KeyType:%d, MacAddr%pM\n", dev, EntryNo, KeyIndex, KeyType, MacAddr);
|
|
|
|
if (DefaultKey)
|
|
usConfig |= BIT15 | (KeyType<<2);
|
|
else
|
|
usConfig |= BIT15 | (KeyType<<2) | KeyIndex;
|
|
|
|
|
|
for (i = 0; i < CAM_CONTENT_COUNT; i++) {
|
|
TargetCommand = i+CAM_CONTENT_COUNT*EntryNo;
|
|
TargetCommand |= BIT31|BIT16;
|
|
|
|
if (i == 0) { /* MAC|Config */
|
|
TargetContent = (u32)(*(MacAddr+0)) << 16|
|
|
(u32)(*(MacAddr+1)) << 24|
|
|
(u32)usConfig;
|
|
|
|
write_nic_dword(dev, WCAMI, TargetContent);
|
|
write_nic_dword(dev, RWCAM, TargetCommand);
|
|
} else if (i == 1) { /* MAC */
|
|
TargetContent = (u32)(*(MacAddr+2)) |
|
|
(u32)(*(MacAddr+3)) << 8|
|
|
(u32)(*(MacAddr+4)) << 16|
|
|
(u32)(*(MacAddr+5)) << 24;
|
|
write_nic_dword(dev, WCAMI, TargetContent);
|
|
write_nic_dword(dev, RWCAM, TargetCommand);
|
|
} else {
|
|
//Key Material
|
|
if (KeyContent != NULL) {
|
|
write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)));
|
|
write_nic_dword(dev, RWCAM, TargetCommand);
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/***************************************************************************
|
|
------------------- module init / exit stubs ----------------
|
|
****************************************************************************/
|
|
module_init(rtl8192_usb_module_init);
|
|
module_exit(rtl8192_usb_module_exit);
|