redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/mach-omap2/io.c
Paul Walmsley dc0b3a7014 OMAP2+: clockdomains: move clockdomain static data to .c files 
Static data should be declared in .c files, not .h files.  It should be
possible to #include .h files at any point without creating multiple
copies of the same data.

We converted the clock data to .c files some time ago.  This patch does
the same for the clockdomain data.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-21 20:01:20 -07:00

455 lines
10 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-omap2/io.c
*
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
* Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/omapfb.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include <plat/gpmc.h>
#include <plat/serial.h>
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
#include "io.h"
#include <plat/omap-pm.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
#ifdef CONFIG_ARCH_OMAP2
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
.length = L3_24XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_24XX_VIRT,
.pfn = __phys_to_pfn(L4_24XX_PHYS),
.length = L4_24XX_SIZE,
.type = MT_DEVICE
},
};
#ifdef CONFIG_ARCH_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
.virtual = DSP_MEM_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
.length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_IPI_2420_VIRT,
.pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
.length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_MMU_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
.length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};
#endif
#ifdef CONFIG_ARCH_OMAP2430
static struct map_desc omap243x_io_desc[] __initdata = {
{
.virtual = L4_WK_243X_VIRT,
.pfn = __phys_to_pfn(L4_WK_243X_PHYS),
.length = L4_WK_243X_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
.length = OMAP243X_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
.length = OMAP243X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
.length = OMAP243X_SMS_SIZE,
.type = MT_DEVICE
},
};
#endif
#endif
#ifdef CONFIG_ARCH_OMAP3
static struct map_desc omap34xx_io_desc[] __initdata = {
{
.virtual = L3_34XX_VIRT,
.pfn = __phys_to_pfn(L3_34XX_PHYS),
.length = L3_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP34XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
.length = OMAP34XX_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
.length = OMAP343X_SMS_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
.length = OMAP343X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_PER_34XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
.length = L4_PER_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_EMU_34XX_VIRT,
.pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
#if defined(CONFIG_DEBUG_LL) && \
(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
{
.virtual = ZOOM_UART_VIRT,
.pfn = __phys_to_pfn(ZOOM_UART_BASE),
.length = SZ_1M,
.type = MT_DEVICE
},
#endif
};
#endif
#ifdef CONFIG_ARCH_OMAP4
static struct map_desc omap44xx_io_desc[] __initdata = {
{
.virtual = L3_44XX_VIRT,
.pfn = __phys_to_pfn(L3_44XX_PHYS),
.length = L3_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_44XX_VIRT,
.pfn = __phys_to_pfn(L4_44XX_PHYS),
.length = L4_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
.length = OMAP44XX_GPMC_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_EMIF1_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
.length = OMAP44XX_EMIF1_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_EMIF2_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
.length = OMAP44XX_EMIF2_SIZE,
.type = MT_DEVICE,
},
{
.virtual = OMAP44XX_DMM_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS),
.length = OMAP44XX_DMM_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER_44XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
.length = L4_PER_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_EMU_44XX_VIRT,
.pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
.length = L4_EMU_44XX_SIZE,
.type = MT_DEVICE,
},
};
#endif
static void __init _omap2_map_common_io(void)
{
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
*/
local_flush_tlb_all();
flush_cache_all();
omap2_check_revision();
omap_sram_init();
}
#ifdef CONFIG_ARCH_OMAP2420
void __init omap242x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
_omap2_map_common_io();
}
#endif
#ifdef CONFIG_ARCH_OMAP2430
void __init omap243x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
_omap2_map_common_io();
}
#endif
#ifdef CONFIG_ARCH_OMAP3
void __init omap34xx_map_common_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
_omap2_map_common_io();
}
#endif
#ifdef CONFIG_ARCH_OMAP4
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
_omap2_map_common_io();
}
#endif
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*
* Sets the CORE DPLL3 M2 divider to the same value that it's at
* currently. This has the effect of setting the SDRC SDRAM AC timing
* registers to the values currently defined by the kernel. Currently
* only defined for OMAP3; will return 0 if called on OMAP2. Returns
* -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
* or passes along the return value of clk_set_rate().
*/
static int __init _omap2_init_reprogram_sdrc(void)
{
struct clk *dpll3_m2_ck;
int v = -EINVAL;
long rate;
if (!cpu_is_omap34xx())
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
v = clk_set_rate(dpll3_m2_ck, rate);
if (v)
pr_err("dpll3_m2_clk rate change failed: %d\n", v);
clk_put(dpll3_m2_ck);
return v;
}
static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
{
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
/*
* Initialize asm_irq_base for entry-macro.S
*/
static inline void omap_irq_base_init(void)
{
extern void __iomem *omap_irq_base;
#ifdef MULTI_OMAP2
if (cpu_is_omap24xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
else if (cpu_is_omap34xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
else if (cpu_is_omap44xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
else
pr_err("Could not initialize omap_irq_base\n");
#endif
}
void __init omap2_init_common_infrastructure(void)
{
u8 postsetup_state;
if (cpu_is_omap242x()) {
omap2xxx_powerdomains_init();
omap2_clockdomains_init();
omap2420_hwmod_init();
} else if (cpu_is_omap243x()) {
omap2xxx_powerdomains_init();
omap2_clockdomains_init();
omap2430_hwmod_init();
} else if (cpu_is_omap34xx()) {
omap3xxx_powerdomains_init();
omap2_clockdomains_init();
omap3xxx_hwmod_init();
} else if (cpu_is_omap44xx()) {
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
} else {
pr_err("Could not init hwmod data - unknown SoC\n");
}
/* Set the default postsetup state for all hwmods */
#ifdef CONFIG_PM_RUNTIME
postsetup_state = _HWMOD_STATE_IDLE;
#else
postsetup_state = _HWMOD_STATE_ENABLED;
#endif
omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
/*
* Set the default postsetup state for unusual modules (like
* MPU WDT).
*
* The postsetup_state is not actually used until
* omap_hwmod_late_init(), so boards that desire full watchdog
* coverage of kernel initialization can reprogram the
* postsetup_state between the calls to
* omap2_init_common_infra() and omap2_init_common_devices().
*
* XXX ideally we could detect whether the MPU WDT was currently
* enabled here and make this conditional
*/
postsetup_state = _HWMOD_STATE_DISABLED;
omap_hwmod_for_each_by_class("wd_timer",
_set_hwmod_postsetup_state,
&postsetup_state);
omap_pm_if_early_init();
if (cpu_is_omap2420())
omap2420_clk_init();
else if (cpu_is_omap2430())
omap2430_clk_init();
else if (cpu_is_omap34xx())
omap3xxx_clk_init();
else if (cpu_is_omap44xx())
omap4xxx_clk_init();
else
pr_err("Could not init clock framework - unknown SoC\n");
}
void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
omap_serial_early_init();
omap_hwmod_late_init();
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
gpmc_init();
omap_irq_base_init();
}
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
u8 omap_readb(u32 pa)
{
return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readb);
u16 omap_readw(u32 pa)
{
return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readw);
u32 omap_readl(u32 pa)
{
return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readl);
void omap_writeb(u8 v, u32 pa)
{
__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writeb);
void omap_writew(u16 v, u32 pa)
{
__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writew);
void omap_writel(u32 v, u32 pa)
{
__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writel);
View git blame Copy permalink