alistair23-linux/drivers/gpio/gpio-brcmstb.c
Thomas Gleixner bd0b9ac405 genirq: Remove irq argument from irq flow handlers
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-16 15:47:51 +02:00

555 lines
15 KiB
C

/*
* Copyright (C) 2015 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/module.h>
#include <linux/basic_mmio_gpio.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#define GIO_BANK_SIZE 0x20
#define GIO_ODEN(bank) (((bank) * GIO_BANK_SIZE) + 0x00)
#define GIO_DATA(bank) (((bank) * GIO_BANK_SIZE) + 0x04)
#define GIO_IODIR(bank) (((bank) * GIO_BANK_SIZE) + 0x08)
#define GIO_EC(bank) (((bank) * GIO_BANK_SIZE) + 0x0c)
#define GIO_EI(bank) (((bank) * GIO_BANK_SIZE) + 0x10)
#define GIO_MASK(bank) (((bank) * GIO_BANK_SIZE) + 0x14)
#define GIO_LEVEL(bank) (((bank) * GIO_BANK_SIZE) + 0x18)
#define GIO_STAT(bank) (((bank) * GIO_BANK_SIZE) + 0x1c)
struct brcmstb_gpio_bank {
struct list_head node;
int id;
struct bgpio_chip bgc;
struct brcmstb_gpio_priv *parent_priv;
u32 width;
struct irq_chip irq_chip;
};
struct brcmstb_gpio_priv {
struct list_head bank_list;
void __iomem *reg_base;
struct platform_device *pdev;
int parent_irq;
int gpio_base;
bool can_wake;
int parent_wake_irq;
struct notifier_block reboot_notifier;
};
#define MAX_GPIO_PER_BANK 32
#define GPIO_BANK(gpio) ((gpio) >> 5)
/* assumes MAX_GPIO_PER_BANK is a multiple of 2 */
#define GPIO_BIT(gpio) ((gpio) & (MAX_GPIO_PER_BANK - 1))
static inline struct brcmstb_gpio_bank *
brcmstb_gpio_gc_to_bank(struct gpio_chip *gc)
{
struct bgpio_chip *bgc = to_bgpio_chip(gc);
return container_of(bgc, struct brcmstb_gpio_bank, bgc);
}
static inline struct brcmstb_gpio_priv *
brcmstb_gpio_gc_to_priv(struct gpio_chip *gc)
{
struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
return bank->parent_priv;
}
static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
unsigned int offset, bool enable)
{
struct bgpio_chip *bgc = &bank->bgc;
struct brcmstb_gpio_priv *priv = bank->parent_priv;
u32 mask = bgc->pin2mask(bgc, offset);
u32 imask;
unsigned long flags;
spin_lock_irqsave(&bgc->lock, flags);
imask = bgc->read_reg(priv->reg_base + GIO_MASK(bank->id));
if (enable)
imask |= mask;
else
imask &= ~mask;
bgc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask);
spin_unlock_irqrestore(&bgc->lock, flags);
}
/* -------------------- IRQ chip functions -------------------- */
static void brcmstb_gpio_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
brcmstb_gpio_set_imask(bank, d->hwirq, false);
}
static void brcmstb_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
brcmstb_gpio_set_imask(bank, d->hwirq, true);
}
static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
struct brcmstb_gpio_priv *priv = bank->parent_priv;
u32 mask = BIT(d->hwirq);
u32 edge_insensitive, iedge_insensitive;
u32 edge_config, iedge_config;
u32 level, ilevel;
unsigned long flags;
switch (type) {
case IRQ_TYPE_LEVEL_LOW:
level = 0;
edge_config = 0;
edge_insensitive = 0;
break;
case IRQ_TYPE_LEVEL_HIGH:
level = mask;
edge_config = 0;
edge_insensitive = 0;
break;
case IRQ_TYPE_EDGE_FALLING:
level = 0;
edge_config = 0;
edge_insensitive = 0;
break;
case IRQ_TYPE_EDGE_RISING:
level = 0;
edge_config = mask;
edge_insensitive = 0;
break;
case IRQ_TYPE_EDGE_BOTH:
level = 0;
edge_config = 0; /* don't care, but want known value */
edge_insensitive = mask;
break;
default:
return -EINVAL;
}
spin_lock_irqsave(&bank->bgc.lock, flags);
iedge_config = bank->bgc.read_reg(priv->reg_base +
GIO_EC(bank->id)) & ~mask;
iedge_insensitive = bank->bgc.read_reg(priv->reg_base +
GIO_EI(bank->id)) & ~mask;
ilevel = bank->bgc.read_reg(priv->reg_base +
GIO_LEVEL(bank->id)) & ~mask;
bank->bgc.write_reg(priv->reg_base + GIO_EC(bank->id),
iedge_config | edge_config);
bank->bgc.write_reg(priv->reg_base + GIO_EI(bank->id),
iedge_insensitive | edge_insensitive);
bank->bgc.write_reg(priv->reg_base + GIO_LEVEL(bank->id),
ilevel | level);
spin_unlock_irqrestore(&bank->bgc.lock, flags);
return 0;
}
static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv,
unsigned int enable)
{
int ret = 0;
/*
* Only enable wake IRQ once for however many hwirqs can wake
* since they all use the same wake IRQ. Mask will be set
* up appropriately thanks to IRQCHIP_MASK_ON_SUSPEND flag.
*/
if (enable)
ret = enable_irq_wake(priv->parent_wake_irq);
else
ret = disable_irq_wake(priv->parent_wake_irq);
if (ret)
dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n",
enable ? "enable" : "disable");
return ret;
}
static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
return brcmstb_gpio_priv_set_wake(priv, enable);
}
static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data)
{
struct brcmstb_gpio_priv *priv = data;
if (!priv || irq != priv->parent_wake_irq)
return IRQ_NONE;
pm_wakeup_event(&priv->pdev->dev, 0);
return IRQ_HANDLED;
}
static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
{
struct brcmstb_gpio_priv *priv = bank->parent_priv;
struct irq_domain *irq_domain = bank->bgc.gc.irqdomain;
void __iomem *reg_base = priv->reg_base;
unsigned long status;
unsigned long flags;
spin_lock_irqsave(&bank->bgc.lock, flags);
while ((status = bank->bgc.read_reg(reg_base + GIO_STAT(bank->id)) &
bank->bgc.read_reg(reg_base + GIO_MASK(bank->id)))) {
int bit;
for_each_set_bit(bit, &status, 32) {
u32 stat = bank->bgc.read_reg(reg_base +
GIO_STAT(bank->id));
if (bit >= bank->width)
dev_warn(&priv->pdev->dev,
"IRQ for invalid GPIO (bank=%d, offset=%d)\n",
bank->id, bit);
bank->bgc.write_reg(reg_base + GIO_STAT(bank->id),
stat | BIT(bit));
generic_handle_irq(irq_find_mapping(irq_domain, bit));
}
}
spin_unlock_irqrestore(&bank->bgc.lock, flags);
}
/* Each UPG GIO block has one IRQ for all banks */
static void brcmstb_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct list_head *pos;
/* Interrupts weren't properly cleared during probe */
BUG_ON(!priv || !chip);
chained_irq_enter(chip, desc);
list_for_each(pos, &priv->bank_list) {
struct brcmstb_gpio_bank *bank =
list_entry(pos, struct brcmstb_gpio_bank, node);
brcmstb_gpio_irq_bank_handler(bank);
}
chained_irq_exit(chip, desc);
}
static int brcmstb_gpio_reboot(struct notifier_block *nb,
unsigned long action, void *data)
{
struct brcmstb_gpio_priv *priv =
container_of(nb, struct brcmstb_gpio_priv, reboot_notifier);
/* Enable GPIO for S5 cold boot */
if (action == SYS_POWER_OFF)
brcmstb_gpio_priv_set_wake(priv, 1);
return NOTIFY_DONE;
}
/* Make sure that the number of banks matches up between properties */
static int brcmstb_gpio_sanity_check_banks(struct device *dev,
struct device_node *np, struct resource *res)
{
int res_num_banks = resource_size(res) / GIO_BANK_SIZE;
int num_banks =
of_property_count_u32_elems(np, "brcm,gpio-bank-widths");
if (res_num_banks != num_banks) {
dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n",
res_num_banks, num_banks);
return -EINVAL;
} else {
return 0;
}
}
static int brcmstb_gpio_remove(struct platform_device *pdev)
{
struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev);
struct list_head *pos;
struct brcmstb_gpio_bank *bank;
int ret = 0;
if (!priv) {
dev_err(&pdev->dev, "called %s without drvdata!\n", __func__);
return -EFAULT;
}
/*
* You can lose return values below, but we report all errors, and it's
* more important to actually perform all of the steps.
*/
list_for_each(pos, &priv->bank_list) {
bank = list_entry(pos, struct brcmstb_gpio_bank, node);
ret = bgpio_remove(&bank->bgc);
if (ret)
dev_err(&pdev->dev, "gpiochip_remove fail in cleanup\n");
}
if (priv->reboot_notifier.notifier_call) {
ret = unregister_reboot_notifier(&priv->reboot_notifier);
if (ret)
dev_err(&pdev->dev,
"failed to unregister reboot notifier\n");
}
return ret;
}
static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec, u32 *flags)
{
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
struct brcmstb_gpio_bank *bank = brcmstb_gpio_gc_to_bank(gc);
int offset;
if (gc->of_gpio_n_cells != 2) {
WARN_ON(1);
return -EINVAL;
}
if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
return -EINVAL;
offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
if (offset >= gc->ngpio || offset < 0)
return -EINVAL;
if (unlikely(offset >= bank->width)) {
dev_warn_ratelimited(&priv->pdev->dev,
"Received request for invalid GPIO offset %d\n",
gpiospec->args[0]);
}
if (flags)
*flags = gpiospec->args[1];
return offset;
}
/* Before calling, must have bank->parent_irq set and gpiochip registered */
static int brcmstb_gpio_irq_setup(struct platform_device *pdev,
struct brcmstb_gpio_bank *bank)
{
struct brcmstb_gpio_priv *priv = bank->parent_priv;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
bank->irq_chip.name = dev_name(dev);
bank->irq_chip.irq_mask = brcmstb_gpio_irq_mask;
bank->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask;
bank->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type;
/* Ensures that all non-wakeup IRQs are disabled at suspend */
bank->irq_chip.flags = IRQCHIP_MASK_ON_SUSPEND;
if (IS_ENABLED(CONFIG_PM_SLEEP) && !priv->can_wake &&
of_property_read_bool(np, "wakeup-source")) {
priv->parent_wake_irq = platform_get_irq(pdev, 1);
if (priv->parent_wake_irq < 0) {
dev_warn(dev,
"Couldn't get wake IRQ - GPIOs will not be able to wake from sleep");
} else {
int err;
/*
* Set wakeup capability before requesting wakeup
* interrupt, so we can process boot-time "wakeups"
* (e.g., from S5 cold boot)
*/
device_set_wakeup_capable(dev, true);
device_wakeup_enable(dev);
err = devm_request_irq(dev, priv->parent_wake_irq,
brcmstb_gpio_wake_irq_handler, 0,
"brcmstb-gpio-wake", priv);
if (err < 0) {
dev_err(dev, "Couldn't request wake IRQ");
return err;
}
priv->reboot_notifier.notifier_call =
brcmstb_gpio_reboot;
register_reboot_notifier(&priv->reboot_notifier);
priv->can_wake = true;
}
}
if (priv->can_wake)
bank->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake;
gpiochip_irqchip_add(&bank->bgc.gc, &bank->irq_chip, 0,
handle_simple_irq, IRQ_TYPE_NONE);
gpiochip_set_chained_irqchip(&bank->bgc.gc, &bank->irq_chip,
priv->parent_irq, brcmstb_gpio_irq_handler);
return 0;
}
static int brcmstb_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
void __iomem *reg_base;
struct brcmstb_gpio_priv *priv;
struct resource *res;
struct property *prop;
const __be32 *p;
u32 bank_width;
int num_banks = 0;
int err;
static int gpio_base;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
platform_set_drvdata(pdev, priv);
INIT_LIST_HEAD(&priv->bank_list);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg_base = devm_ioremap_resource(dev, res);
if (IS_ERR(reg_base))
return PTR_ERR(reg_base);
priv->gpio_base = gpio_base;
priv->reg_base = reg_base;
priv->pdev = pdev;
if (of_property_read_bool(np, "interrupt-controller")) {
priv->parent_irq = platform_get_irq(pdev, 0);
if (priv->parent_irq <= 0) {
dev_err(dev, "Couldn't get IRQ");
return -ENOENT;
}
} else {
priv->parent_irq = -ENOENT;
}
if (brcmstb_gpio_sanity_check_banks(dev, np, res))
return -EINVAL;
of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p,
bank_width) {
struct brcmstb_gpio_bank *bank;
struct bgpio_chip *bgc;
struct gpio_chip *gc;
bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
if (!bank) {
err = -ENOMEM;
goto fail;
}
bank->parent_priv = priv;
bank->id = num_banks;
if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) {
dev_err(dev, "Invalid bank width %d\n", bank_width);
goto fail;
} else {
bank->width = bank_width;
}
/*
* Regs are 4 bytes wide, have data reg, no set/clear regs,
* and direction bits have 0 = output and 1 = input
*/
bgc = &bank->bgc;
err = bgpio_init(bgc, dev, 4,
reg_base + GIO_DATA(bank->id),
NULL, NULL, NULL,
reg_base + GIO_IODIR(bank->id), 0);
if (err) {
dev_err(dev, "bgpio_init() failed\n");
goto fail;
}
gc = &bgc->gc;
gc->of_node = np;
gc->owner = THIS_MODULE;
gc->label = np->full_name;
gc->base = gpio_base;
gc->of_gpio_n_cells = 2;
gc->of_xlate = brcmstb_gpio_of_xlate;
/* not all ngpio lines are valid, will use bank width later */
gc->ngpio = MAX_GPIO_PER_BANK;
/*
* Mask all interrupts by default, since wakeup interrupts may
* be retained from S5 cold boot
*/
bank->bgc.write_reg(reg_base + GIO_MASK(bank->id), 0);
err = gpiochip_add(gc);
if (err) {
dev_err(dev, "Could not add gpiochip for bank %d\n",
bank->id);
goto fail;
}
gpio_base += gc->ngpio;
if (priv->parent_irq > 0) {
err = brcmstb_gpio_irq_setup(pdev, bank);
if (err)
goto fail;
}
dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
gc->base, gc->ngpio, bank->width);
/* Everything looks good, so add bank to list */
list_add(&bank->node, &priv->bank_list);
num_banks++;
}
dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
num_banks, priv->gpio_base, gpio_base - 1);
return 0;
fail:
(void) brcmstb_gpio_remove(pdev);
return err;
}
static const struct of_device_id brcmstb_gpio_of_match[] = {
{ .compatible = "brcm,brcmstb-gpio" },
{},
};
MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match);
static struct platform_driver brcmstb_gpio_driver = {
.driver = {
.name = "brcmstb-gpio",
.of_match_table = brcmstb_gpio_of_match,
},
.probe = brcmstb_gpio_probe,
.remove = brcmstb_gpio_remove,
};
module_platform_driver(brcmstb_gpio_driver);
MODULE_AUTHOR("Gregory Fong");
MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO");
MODULE_LICENSE("GPL v2");