![Russell King](/assets/img/avatar_default.png)
The following patch fixes these section mismatch warnings: WARNING: arch/arm/mach-at91/built-in.o(.text+0xdf4): Section mismatch: reference to .init.data:dk_nand_partition (between 'nand_partitions' and 'at91_leds_event') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (between 'nand_partitions' and 'ads7843_pendown_state') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xc28): Section mismatch: reference to .init.data:kb9202_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-footbridge/built-in.o(.text+0xaa4): Section mismatch: reference to .init.data:cats_pci (between 'cats_pci_init' and 'ebsa285_leds_event')WARNING: arch/arm/mach-ixp2000/built-in.o(.text+0xb54): Section mismatch: reference to .init.text:ixp2000_init_irq (between 'ixdp2x00_init_irq' and 'ixdp2x00_irq_handler') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x670): Section mismatch: reference to .init.text:ixp23xx_pci_common_init (between 'ixp23xx_pci_slave_init' and 'ixp23xx_pci_scan_bus') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x890): Section mismatch: reference to .init.text:ixp23xx_init_irq (between 'ixdp2351_init_irq' and 'roadrunner_pci_preinit') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x9a8): Section mismatch: reference to .init.text:ixp23xx_pci_preinit (after 'roadrunner_pci_preinit') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:imx_set_mmc_info (between '__ksymtab_imx_set_mmc_info' and '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x88): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1930): Section mismatch: reference to .init.data:neponset_port_fns (between 'neponset_probe' and 'assabet_leds_event') WARNING: drivers/built-in.o(.text+0x3f100): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x3f1c8): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4f988): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4fa50): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
311 lines
8.6 KiB
C
311 lines
8.6 KiB
C
/*
|
|
* arch/arm/mach-ixp2000/ixdp2x00.c
|
|
*
|
|
* Code common to IXDP2400 and IXDP2800 platforms.
|
|
*
|
|
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
|
|
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
|
|
*
|
|
* Copyright (C) 2002 Intel Corp.
|
|
* Copyright (C) 2003-2004 MontaVista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/system.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/mach/pci.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <asm/arch/gpio.h>
|
|
|
|
|
|
/*************************************************************************
|
|
* IXDP2x00 IRQ Initialization
|
|
*************************************************************************/
|
|
static volatile unsigned long *board_irq_mask;
|
|
static volatile unsigned long *board_irq_stat;
|
|
static unsigned long board_irq_count;
|
|
|
|
#ifdef CONFIG_ARCH_IXDP2400
|
|
/*
|
|
* Slowport configuration for accessing CPLD registers on IXDP2x00
|
|
*/
|
|
static struct slowport_cfg slowport_cpld_cfg = {
|
|
.CCR = SLOWPORT_CCR_DIV_2,
|
|
.WTC = 0x00000070,
|
|
.RTC = 0x00000070,
|
|
.PCR = SLOWPORT_MODE_FLASH,
|
|
.ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8
|
|
};
|
|
#endif
|
|
|
|
static void ixdp2x00_irq_mask(unsigned int irq)
|
|
{
|
|
unsigned long dummy;
|
|
static struct slowport_cfg old_cfg;
|
|
|
|
/*
|
|
* This is ugly in common code but really don't know
|
|
* of a better way to handle it. :(
|
|
*/
|
|
#ifdef CONFIG_ARCH_IXDP2400
|
|
if (machine_is_ixdp2400())
|
|
ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
|
|
#endif
|
|
|
|
dummy = *board_irq_mask;
|
|
dummy |= IXP2000_BOARD_IRQ_MASK(irq);
|
|
ixp2000_reg_wrb(board_irq_mask, dummy);
|
|
|
|
#ifdef CONFIG_ARCH_IXDP2400
|
|
if (machine_is_ixdp2400())
|
|
ixp2000_release_slowport(&old_cfg);
|
|
#endif
|
|
}
|
|
|
|
static void ixdp2x00_irq_unmask(unsigned int irq)
|
|
{
|
|
unsigned long dummy;
|
|
static struct slowport_cfg old_cfg;
|
|
|
|
#ifdef CONFIG_ARCH_IXDP2400
|
|
if (machine_is_ixdp2400())
|
|
ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
|
|
#endif
|
|
|
|
dummy = *board_irq_mask;
|
|
dummy &= ~IXP2000_BOARD_IRQ_MASK(irq);
|
|
ixp2000_reg_wrb(board_irq_mask, dummy);
|
|
|
|
if (machine_is_ixdp2400())
|
|
ixp2000_release_slowport(&old_cfg);
|
|
}
|
|
|
|
static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
volatile u32 ex_interrupt = 0;
|
|
static struct slowport_cfg old_cfg;
|
|
int i;
|
|
|
|
desc->chip->mask(irq);
|
|
|
|
#ifdef CONFIG_ARCH_IXDP2400
|
|
if (machine_is_ixdp2400())
|
|
ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
|
|
#endif
|
|
ex_interrupt = *board_irq_stat & 0xff;
|
|
if (machine_is_ixdp2400())
|
|
ixp2000_release_slowport(&old_cfg);
|
|
|
|
if(!ex_interrupt) {
|
|
printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n");
|
|
return;
|
|
}
|
|
|
|
for(i = 0; i < board_irq_count; i++) {
|
|
if(ex_interrupt & (1 << i)) {
|
|
struct irq_desc *cpld_desc;
|
|
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
|
|
cpld_desc = irq_desc + cpld_irq;
|
|
desc_handle_irq(cpld_irq, cpld_desc);
|
|
}
|
|
}
|
|
|
|
desc->chip->unmask(irq);
|
|
}
|
|
|
|
static struct irq_chip ixdp2x00_cpld_irq_chip = {
|
|
.ack = ixdp2x00_irq_mask,
|
|
.mask = ixdp2x00_irq_mask,
|
|
.unmask = ixdp2x00_irq_unmask
|
|
};
|
|
|
|
void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs)
|
|
{
|
|
unsigned int irq;
|
|
|
|
ixp2000_init_irq();
|
|
|
|
if (!ixdp2x00_master_npu())
|
|
return;
|
|
|
|
board_irq_stat = stat_reg;
|
|
board_irq_mask = mask_reg;
|
|
board_irq_count = nr_irqs;
|
|
|
|
*board_irq_mask = 0xffffffff;
|
|
|
|
for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) {
|
|
set_irq_chip(irq, &ixdp2x00_cpld_irq_chip);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
|
|
/* Hook into PCI interrupt */
|
|
set_irq_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* IXDP2x00 memory map
|
|
*************************************************************************/
|
|
static struct map_desc ixdp2x00_io_desc __initdata = {
|
|
.virtual = IXDP2X00_VIRT_CPLD_BASE,
|
|
.pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
|
|
.length = IXDP2X00_CPLD_SIZE,
|
|
.type = MT_DEVICE
|
|
};
|
|
|
|
void __init ixdp2x00_map_io(void)
|
|
{
|
|
ixp2000_map_io();
|
|
|
|
iotable_init(&ixdp2x00_io_desc, 1);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* IXDP2x00-common PCI init
|
|
*
|
|
* The IXDP2[48]00 has a horrid PCI bus layout. Basically the board
|
|
* contains two NPUs (ingress and egress) connected over PCI, both running
|
|
* instances of the kernel. So far so good. Peers on the PCI bus running
|
|
* Linux is a common design in telecom systems. The problem is that instead
|
|
* of all the devices being controlled by a single host, different
|
|
* devices are controlled by different NPUs on the same bus, leading to
|
|
* multiple hosts on the bus. The exact bus layout looks like:
|
|
*
|
|
* Bus 0
|
|
* Master NPU <-------------------+-------------------> Slave NPU
|
|
* |
|
|
* |
|
|
* P2P
|
|
* |
|
|
*
|
|
* Bus 1 |
|
|
* <--+------+---------+---------+------+-->
|
|
* | | | | |
|
|
* | | | | |
|
|
* ... Dev PMC Media Eth0 Eth1 ...
|
|
*
|
|
* The master controls all but Eth1, which is controlled by the
|
|
* slave. What this means is that the both the master and the slave
|
|
* have to scan the bus, but only one of them can enumerate the bus.
|
|
* In addition, after the bus is scanned, each kernel must remove
|
|
* the device(s) it does not control from the PCI dev list otherwise
|
|
* a driver on each NPU will try to manage it and we will have horrible
|
|
* conflicts. Oh..and the slave NPU needs to see the master NPU
|
|
* for Intel's drivers to work properly. Closed source drivers...
|
|
*
|
|
* The way we deal with this is fairly simple but ugly:
|
|
*
|
|
* 1) Let master scan and enumerate the bus completely.
|
|
* 2) Master deletes Eth1 from device list.
|
|
* 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave)
|
|
* from device list.
|
|
* 4) Find HW designers and LART them.
|
|
*
|
|
* The boards also do not do normal PCI IRQ routing, or any sort of
|
|
* sensical swizzling, so we just need to check where on the bus a
|
|
* device sits and figure out to which CPLD pin the interrupt is routed.
|
|
* See ixdp2[48]00.c files.
|
|
*
|
|
*************************************************************************/
|
|
void ixdp2x00_slave_pci_postinit(void)
|
|
{
|
|
struct pci_dev *dev;
|
|
|
|
/*
|
|
* Remove PMC device is there is one
|
|
*/
|
|
if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) {
|
|
pci_remove_bus_device(dev);
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN);
|
|
pci_remove_bus_device(dev);
|
|
pci_dev_put(dev);
|
|
}
|
|
|
|
/**************************************************************************
|
|
* IXDP2x00 Machine Setup
|
|
*************************************************************************/
|
|
static struct flash_platform_data ixdp2x00_platform_data = {
|
|
.map_name = "cfi_probe",
|
|
.width = 1,
|
|
};
|
|
|
|
static struct ixp2000_flash_data ixdp2x00_flash_data = {
|
|
.platform_data = &ixdp2x00_platform_data,
|
|
.nr_banks = 1
|
|
};
|
|
|
|
static struct resource ixdp2x00_flash_resource = {
|
|
.start = 0xc4000000,
|
|
.end = 0xc4000000 + 0x00ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device ixdp2x00_flash = {
|
|
.name = "IXP2000-Flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &ixdp2x00_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &ixdp2x00_flash_resource,
|
|
};
|
|
|
|
static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = {
|
|
.sda_pin = IXDP2X00_GPIO_SDA,
|
|
.scl_pin = IXDP2X00_GPIO_SCL,
|
|
};
|
|
|
|
static struct platform_device ixdp2x00_i2c_controller = {
|
|
.name = "IXP2000-I2C",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &ixdp2x00_i2c_gpio_pins,
|
|
},
|
|
.num_resources = 0
|
|
};
|
|
|
|
static struct platform_device *ixdp2x00_devices[] __initdata = {
|
|
&ixdp2x00_flash,
|
|
&ixdp2x00_i2c_controller
|
|
};
|
|
|
|
void __init ixdp2x00_init_machine(void)
|
|
{
|
|
gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1);
|
|
gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT);
|
|
|
|
platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices));
|
|
ixp2000_uart_init();
|
|
}
|
|
|