alistair23-linux/drivers/usb
Christian Engelmayer e6604a7fd7 EHCI: Quirk flag for port power handling on overcurrent.
Commit 756aa6b3d5 (ehci-hub: improved
over-current recovery) added port power cycling on overcurrent indications as
needed by the MPC8349 USB controller after resolving of the overcurrent
situation in order to have the host state machine assert the correct port
status again.

Commit 81463c1d70 (EHCI: only power off port if
over-current is active) solved a thus resulting issue of endless overcurrent
changes in combination with the MAX4967 USB power supply chip that signals
overcurrent when power is not enabled by only powering off a port if the
overcurrent is currently active.

Added quirks flag need_oc_pp_cycle in order to specify the needed behaviour as
there is no common behaviour that can comply with both requirements.
Activated the quirks handling for Freescale 83xx based boards.

Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 11:38:53 -07:00
..
atm
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea usb: chipidea: udc: add the define TD_PAGE_COUNT and fix all users 2013-03-30 08:20:49 -07:00
class USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMAND 2013-03-25 13:32:20 -07:00
core USB: driver.c: processing failure, maching resume condition with suspend condition 2013-04-01 12:32:43 -07:00
dwc3 usb: dwc3: ep0: fix sparc64 build 2013-03-08 09:42:50 +02:00
early
gadget usb: Fix compile error by selecting USB_OTG_UTILS 2013-03-27 08:49:20 -07:00
host EHCI: Quirk flag for port power handling on overcurrent. 2013-04-03 11:38:53 -07:00
image
misc usb/misc/appledisplay: Add 24" LED Cinema display 2013-04-03 11:38:53 -07:00
mon
musb usb: fixes for v3.9-rc4 2013-03-21 08:40:22 -07:00
otg Merge branch 'usb-linus' into usb-next 2013-03-20 16:21:47 -07:00
phy Merge branch 'usb-linus' into usb-next 2013-03-28 11:00:55 -07:00
renesas_usbhs
serial Revert "USB: serial: fix hang when opening port" 2013-03-28 11:02:24 -07:00
storage Merge branch 'usb-linus' into usb-next 2013-03-20 16:21:47 -07:00
wusbcore
Kconfig
Makefile usb: Makefile: fix drivers/usb/phy/ Makefile entry 2013-03-07 12:29:09 +08:00
README
usb-common.c
usb-skeleton.c USB: usb-skeleton.c: fix blocked forever in skel_read 2013-03-25 13:32:20 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.