redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arc/include/asm/entry.h
Liav Rehana 86147e3cfa ARC: use correct offset in pt_regs for saving/restoring user mode r25 
User mode callee regs are explicitly collected before signal delivery or
breakpoint trap. r25 is special for kernel as it serves as task pointer,
so user mode value is clobbered very early. It is saved in pt_regs where
generally only scratch (aka caller saved) regs are saved.

The code to access the corresponding pt_regs location had a subtle bug as
it was using load/store with scaling of offset, whereas the offset was already
byte wise correct. So fix this by replacing LD.AS with a standard LD

Cc: <stable@vger.kernel.org>
Signed-off-by: Liav Rehana <liavr@mellanox.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: rewrote title and commit log]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-08-19 10:44:13 -07:00

305 lines
6.7 KiB
C
Raw Blame History

/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARC_ENTRY_H
#define __ASM_ARC_ENTRY_H
#include <asm/unistd.h> /* For NR_syscalls defination */
#include <asm/arcregs.h>
#include <asm/ptrace.h>
#include <asm/processor.h> /* For VMALLOC_START */
#include <asm/mmu.h>
#ifdef CONFIG_ISA_ARCOMPACT
#include <asm/entry-compact.h> /* ISA specific bits */
#else
#include <asm/entry-arcv2.h>
#endif
/* Note on the LD/ST addr modes with addr reg wback
*
* LD.a same as LD.aw
*
* LD.a reg1, [reg2, x] => Pre Incr
* Eff Addr for load = [reg2 + x]
*
* LD.ab reg1, [reg2, x] => Post Incr
* Eff Addr for load = [reg2]
*/
.macro PUSH reg
st.a \reg, [sp, -4]
.endm
.macro PUSHAX aux
lr r9, [\aux]
PUSH r9
.endm
.macro POP reg
ld.ab \reg, [sp, 4]
.endm
.macro POPAX aux
POP r9
sr r9, [\aux]
.endm
/*--------------------------------------------------------------
* Helpers to save/restore Scratch Regs:
* used by Interrupt/Exception Prologue/Epilogue
*-------------------------------------------------------------*/
.macro SAVE_R0_TO_R12
PUSH r0
PUSH r1
PUSH r2
PUSH r3
PUSH r4
PUSH r5
PUSH r6
PUSH r7
PUSH r8
PUSH r9
PUSH r10
PUSH r11
PUSH r12
.endm
.macro RESTORE_R12_TO_R0
POP r12
POP r11
POP r10
POP r9
POP r8
POP r7
POP r6
POP r5
POP r4
POP r3
POP r2
POP r1
POP r0
#ifdef CONFIG_ARC_CURR_IN_REG
ld r25, [sp, 12]
#endif
.endm
/*--------------------------------------------------------------
* Helpers to save/restore callee-saved regs:
* used by several macros below
*-------------------------------------------------------------*/
.macro SAVE_R13_TO_R24
PUSH r13
PUSH r14
PUSH r15
PUSH r16
PUSH r17
PUSH r18
PUSH r19
PUSH r20
PUSH r21
PUSH r22
PUSH r23
PUSH r24
.endm
.macro RESTORE_R24_TO_R13
POP r24
POP r23
POP r22
POP r21
POP r20
POP r19
POP r18
POP r17
POP r16
POP r15
POP r14
POP r13
.endm
/*--------------------------------------------------------------
* Collect User Mode callee regs as struct callee_regs - needed by
* fork/do_signal/unaligned-access-emulation.
* (By default only scratch regs are saved on entry to kernel)
*
* Special handling for r25 if used for caching Task Pointer.
* It would have been saved in task->thread.user_r25 already, but to keep
* the interface same it is copied into regular r25 placeholder in
* struct callee_regs.
*-------------------------------------------------------------*/
.macro SAVE_CALLEE_SAVED_USER
mov r12, sp ; save SP as ref to pt_regs
SAVE_R13_TO_R24
#ifdef CONFIG_ARC_CURR_IN_REG
; Retrieve orig r25 and save it with rest of callee_regs
ld r12, [r12, PT_user_r25]
PUSH r12
#else
PUSH r25
#endif
.endm
/*--------------------------------------------------------------
* Save kernel Mode callee regs at the time of Contect Switch.
*
* Special handling for r25 if used for caching Task Pointer.
* Kernel simply skips saving it since it will be loaded with
* incoming task pointer anyways
*-------------------------------------------------------------*/
.macro SAVE_CALLEE_SAVED_KERNEL
SAVE_R13_TO_R24
#ifdef CONFIG_ARC_CURR_IN_REG
sub sp, sp, 4
#else
PUSH r25
#endif
.endm
/*--------------------------------------------------------------
* Opposite of SAVE_CALLEE_SAVED_KERNEL
*-------------------------------------------------------------*/
.macro RESTORE_CALLEE_SAVED_KERNEL
#ifdef CONFIG_ARC_CURR_IN_REG
add sp, sp, 4 /* skip usual r25 placeholder */
#else
POP r25
#endif
RESTORE_R24_TO_R13
.endm
/*--------------------------------------------------------------
* Opposite of SAVE_CALLEE_SAVED_USER
*
* ptrace tracer or unaligned-access fixup might have changed a user mode
* callee reg which is saved back to usual r25 storage location
*-------------------------------------------------------------*/
.macro RESTORE_CALLEE_SAVED_USER
#ifdef CONFIG_ARC_CURR_IN_REG
POP r12
#else
POP r25
#endif
RESTORE_R24_TO_R13
; SP is back to start of pt_regs
#ifdef CONFIG_ARC_CURR_IN_REG
st r12, [sp, PT_user_r25]
#endif
.endm
/*--------------------------------------------------------------
* Super FAST Restore callee saved regs by simply re-adjusting SP
*-------------------------------------------------------------*/
.macro DISCARD_CALLEE_SAVED_USER
add sp, sp, SZ_CALLEE_REGS
.endm
/*-------------------------------------------------------------
* given a tsk struct, get to the base of it's kernel mode stack
* tsk->thread_info is really a PAGE, whose bottom hoists stack
* which grows upwards towards thread_info
*------------------------------------------------------------*/
.macro GET_TSK_STACK_BASE tsk, out
/* Get task->thread_info (this is essentially start of a PAGE) */
ld \out, [\tsk, TASK_THREAD_INFO]
/* Go to end of page where stack begins (grows upwards) */
add2 \out, \out, (THREAD_SIZE)/4
.endm
/*
* @reg [OUT] thread_info->flags of "current"
*/
.macro GET_CURR_THR_INFO_FLAGS reg
GET_CURR_THR_INFO_FROM_SP \reg
ld \reg, [\reg, THREAD_INFO_FLAGS]
.endm
#ifdef CONFIG_SMP
/*-------------------------------------------------
* Retrieve the current running task on this CPU
* 1. Determine curr CPU id.
* 2. Use it to index into _current_task[ ]
*/
.macro GET_CURR_TASK_ON_CPU reg
GET_CPU_ID \reg
ld.as \reg, [@_current_task, \reg]
.endm
/*-------------------------------------------------
* Save a new task as the "current" task on this CPU
* 1. Determine curr CPU id.
* 2. Use it to index into _current_task[ ]
*
* Coded differently than GET_CURR_TASK_ON_CPU (which uses LD.AS)
* because ST r0, [r1, offset] can ONLY have s9 @offset
* while LD can take s9 (4 byte insn) or LIMM (8 byte insn)
*/
.macro SET_CURR_TASK_ON_CPU tsk, tmp
GET_CPU_ID \tmp
add2 \tmp, @_current_task, \tmp
st \tsk, [\tmp]
#ifdef CONFIG_ARC_CURR_IN_REG
mov r25, \tsk
#endif
.endm
#else /* Uniprocessor implementation of macros */
.macro GET_CURR_TASK_ON_CPU reg
ld \reg, [@_current_task]
.endm
.macro SET_CURR_TASK_ON_CPU tsk, tmp
st \tsk, [@_current_task]
#ifdef CONFIG_ARC_CURR_IN_REG
mov r25, \tsk
#endif
.endm
#endif /* SMP / UNI */
/* ------------------------------------------------------------------
* Get the ptr to some field of Current Task at @off in task struct
* -Uses r25 for Current task ptr if that is enabled
*/
#ifdef CONFIG_ARC_CURR_IN_REG
.macro GET_CURR_TASK_FIELD_PTR off, reg
add \reg, r25, \off
.endm
#else
.macro GET_CURR_TASK_FIELD_PTR off, reg
GET_CURR_TASK_ON_CPU \reg
add \reg, \reg, \off
.endm
#endif /* CONFIG_ARC_CURR_IN_REG */
#endif /* __ASM_ARC_ENTRY_H */
View git blame Copy permalink