![Benjamin Herrenschmidt](/assets/img/avatar_default.png)
This converts all the 32-bit platforms to use the expanded device-tree which is a pretty mechanical change. Unlike 64-bit, the 32-bit kernel didn't rely on platform initializations to setup the MMU since it sets it up entirely before probe_machine() so the move has comparatively less consequences though it's a bigger patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
438 lines
9.9 KiB
C
438 lines
9.9 KiB
C
/*
|
|
* Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Author: Andy Fleming <afleming@freescale.com>
|
|
*
|
|
* Based on 83xx/mpc8360e_pb.c by:
|
|
* Li Yang <LeoLi@freescale.com>
|
|
* Yin Olivia <Hong-hua.Yin@freescale.com>
|
|
*
|
|
* Description:
|
|
* MPC85xx MDS board specific routines.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/major.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/memblock.h>
|
|
#include <linux/fsl/guts.h>
|
|
|
|
#include <linux/atomic.h>
|
|
#include <asm/time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/irq.h>
|
|
#include <mm/mmu_decl.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/udbg.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/fsl_pci.h>
|
|
#include <sysdev/simple_gpio.h>
|
|
#include <soc/fsl/qe/qe.h>
|
|
#include <soc/fsl/qe/qe_ic.h>
|
|
#include <asm/mpic.h>
|
|
#include <asm/swiotlb.h>
|
|
#include "smp.h"
|
|
|
|
#include "mpc85xx.h"
|
|
|
|
#undef DEBUG
|
|
#ifdef DEBUG
|
|
#define DBG(fmt...) udbg_printf(fmt)
|
|
#else
|
|
#define DBG(fmt...)
|
|
#endif
|
|
|
|
#define MV88E1111_SCR 0x10
|
|
#define MV88E1111_SCR_125CLK 0x0010
|
|
static int mpc8568_fixup_125_clock(struct phy_device *phydev)
|
|
{
|
|
int scr;
|
|
int err;
|
|
|
|
/* Workaround for the 125 CLK Toggle */
|
|
scr = phy_read(phydev, MV88E1111_SCR);
|
|
|
|
if (scr < 0)
|
|
return scr;
|
|
|
|
err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
scr = phy_read(phydev, MV88E1111_SCR);
|
|
|
|
if (scr < 0)
|
|
return scr;
|
|
|
|
err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
|
|
{
|
|
int temp;
|
|
int err;
|
|
|
|
/* Errata */
|
|
err = phy_write(phydev,29, 0x0006);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
temp = phy_read(phydev, 30);
|
|
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
temp = (temp & (~0x8000)) | 0x4000;
|
|
err = phy_write(phydev,30, temp);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
err = phy_write(phydev,29, 0x000a);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
temp = phy_read(phydev, 30);
|
|
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
temp = phy_read(phydev, 30);
|
|
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
temp &= ~0x0020;
|
|
|
|
err = phy_write(phydev,30,temp);
|
|
|
|
if (err)
|
|
return err;
|
|
|
|
/* Disable automatic MDI/MDIX selection */
|
|
temp = phy_read(phydev, 16);
|
|
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
temp &= ~0x0060;
|
|
err = phy_write(phydev,16,temp);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* ************************************************************************
|
|
*
|
|
* Setup the architecture
|
|
*
|
|
*/
|
|
#ifdef CONFIG_QUICC_ENGINE
|
|
static void __init mpc85xx_mds_reset_ucc_phys(void)
|
|
{
|
|
struct device_node *np;
|
|
static u8 __iomem *bcsr_regs;
|
|
|
|
/* Map BCSR area */
|
|
np = of_find_node_by_name(NULL, "bcsr");
|
|
if (!np)
|
|
return;
|
|
|
|
bcsr_regs = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
if (!bcsr_regs)
|
|
return;
|
|
|
|
if (machine_is(mpc8568_mds)) {
|
|
#define BCSR_UCC1_GETH_EN (0x1 << 7)
|
|
#define BCSR_UCC2_GETH_EN (0x1 << 7)
|
|
#define BCSR_UCC1_MODE_MSK (0x3 << 4)
|
|
#define BCSR_UCC2_MODE_MSK (0x3 << 0)
|
|
|
|
/* Turn off UCC1 & UCC2 */
|
|
clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
|
|
clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
|
|
|
|
/* Mode is RGMII, all bits clear */
|
|
clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
|
|
BCSR_UCC2_MODE_MSK);
|
|
|
|
/* Turn UCC1 & UCC2 on */
|
|
setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
|
|
setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
|
|
} else if (machine_is(mpc8569_mds)) {
|
|
#define BCSR7_UCC12_GETHnRST (0x1 << 2)
|
|
#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
|
|
#define BCSR_UCC_RGMII (0x1 << 6)
|
|
#define BCSR_UCC_RTBI (0x1 << 5)
|
|
/*
|
|
* U-Boot mangles interrupt polarity for Marvell PHYs,
|
|
* so reset built-in and UEM Marvell PHYs, this puts
|
|
* the PHYs into their normal state.
|
|
*/
|
|
clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
|
|
setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
|
|
|
|
setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
|
|
clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
|
|
|
|
for_each_compatible_node(np, "network", "ucc_geth") {
|
|
const unsigned int *prop;
|
|
int ucc_num;
|
|
|
|
prop = of_get_property(np, "cell-index", NULL);
|
|
if (prop == NULL)
|
|
continue;
|
|
|
|
ucc_num = *prop - 1;
|
|
|
|
prop = of_get_property(np, "phy-connection-type", NULL);
|
|
if (prop == NULL)
|
|
continue;
|
|
|
|
if (strcmp("rtbi", (const char *)prop) == 0)
|
|
clrsetbits_8(&bcsr_regs[7 + ucc_num],
|
|
BCSR_UCC_RGMII, BCSR_UCC_RTBI);
|
|
}
|
|
} else if (machine_is(p1021_mds)) {
|
|
#define BCSR11_ENET_MICRST (0x1 << 5)
|
|
/* Reset Micrel PHY */
|
|
clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
|
|
setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
|
|
}
|
|
|
|
iounmap(bcsr_regs);
|
|
}
|
|
|
|
static void __init mpc85xx_mds_qe_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
mpc85xx_qe_init();
|
|
mpc85xx_qe_par_io_init();
|
|
mpc85xx_mds_reset_ucc_phys();
|
|
|
|
if (machine_is(p1021_mds)) {
|
|
|
|
struct ccsr_guts __iomem *guts;
|
|
|
|
np = of_find_node_by_name(NULL, "global-utilities");
|
|
if (np) {
|
|
guts = of_iomap(np, 0);
|
|
if (!guts)
|
|
pr_err("mpc85xx-rdb: could not map global utilities register\n");
|
|
else{
|
|
/* P1021 has pins muxed for QE and other functions. To
|
|
* enable QE UEC mode, we need to set bit QE0 for UCC1
|
|
* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
|
|
* and QE12 for QE MII management signals in PMUXCR
|
|
* register.
|
|
*/
|
|
setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
|
|
MPC85xx_PMUXCR_QE(3) |
|
|
MPC85xx_PMUXCR_QE(9) |
|
|
MPC85xx_PMUXCR_QE(12));
|
|
iounmap(guts);
|
|
}
|
|
of_node_put(np);
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
static void __init mpc85xx_mds_qeic_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
|
|
if (!of_device_is_available(np)) {
|
|
of_node_put(np);
|
|
return;
|
|
}
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
|
|
if (!np) {
|
|
np = of_find_node_by_type(NULL, "qeic");
|
|
if (!np)
|
|
return;
|
|
}
|
|
|
|
if (machine_is(p1021_mds))
|
|
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
|
|
qe_ic_cascade_high_mpic);
|
|
else
|
|
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
|
|
of_node_put(np);
|
|
}
|
|
#else
|
|
static void __init mpc85xx_mds_qe_init(void) { }
|
|
static void __init mpc85xx_mds_qeic_init(void) { }
|
|
#endif /* CONFIG_QUICC_ENGINE */
|
|
|
|
static void __init mpc85xx_mds_setup_arch(void)
|
|
{
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
|
|
|
|
mpc85xx_smp_init();
|
|
|
|
mpc85xx_mds_qe_init();
|
|
|
|
fsl_pci_assign_primary();
|
|
|
|
swiotlb_detect_4g();
|
|
}
|
|
|
|
|
|
static int __init board_fixups(void)
|
|
{
|
|
char phy_id[20];
|
|
char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
|
|
struct device_node *mdio;
|
|
struct resource res;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
|
|
mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
|
|
|
|
of_address_to_resource(mdio, 0, &res);
|
|
snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
|
|
(unsigned long long)res.start, 1);
|
|
|
|
phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
|
|
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
|
|
|
|
/* Register a workaround for errata */
|
|
snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
|
|
(unsigned long long)res.start, 7);
|
|
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
|
|
|
|
of_node_put(mdio);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
machine_arch_initcall(mpc8568_mds, board_fixups);
|
|
machine_arch_initcall(mpc8569_mds, board_fixups);
|
|
|
|
static int __init mpc85xx_publish_devices(void)
|
|
{
|
|
if (machine_is(mpc8568_mds))
|
|
simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
|
|
if (machine_is(mpc8569_mds))
|
|
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
|
|
|
|
return mpc85xx_common_publish_devices();
|
|
}
|
|
|
|
machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices);
|
|
machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices);
|
|
machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices);
|
|
|
|
machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
|
|
machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
|
|
machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
|
|
|
|
static void __init mpc85xx_mds_pic_init(void)
|
|
{
|
|
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
|
|
MPIC_SINGLE_DEST_CPU,
|
|
0, 256, " OpenPIC ");
|
|
BUG_ON(mpic == NULL);
|
|
|
|
mpic_init(mpic);
|
|
mpc85xx_mds_qeic_init();
|
|
}
|
|
|
|
static int __init mpc85xx_mds_probe(void)
|
|
{
|
|
return of_machine_is_compatible("MPC85xxMDS");
|
|
}
|
|
|
|
define_machine(mpc8568_mds) {
|
|
.name = "MPC8568 MDS",
|
|
.probe = mpc85xx_mds_probe,
|
|
.setup_arch = mpc85xx_mds_setup_arch,
|
|
.init_IRQ = mpc85xx_mds_pic_init,
|
|
.get_irq = mpic_get_irq,
|
|
.restart = fsl_rstcr_restart,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
#ifdef CONFIG_PCI
|
|
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
|
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
|
|
#endif
|
|
};
|
|
|
|
static int __init mpc8569_mds_probe(void)
|
|
{
|
|
return of_machine_is_compatible("fsl,MPC8569EMDS");
|
|
}
|
|
|
|
define_machine(mpc8569_mds) {
|
|
.name = "MPC8569 MDS",
|
|
.probe = mpc8569_mds_probe,
|
|
.setup_arch = mpc85xx_mds_setup_arch,
|
|
.init_IRQ = mpc85xx_mds_pic_init,
|
|
.get_irq = mpic_get_irq,
|
|
.restart = fsl_rstcr_restart,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
#ifdef CONFIG_PCI
|
|
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
|
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
|
|
#endif
|
|
};
|
|
|
|
static int __init p1021_mds_probe(void)
|
|
{
|
|
return of_machine_is_compatible("fsl,P1021MDS");
|
|
|
|
}
|
|
|
|
define_machine(p1021_mds) {
|
|
.name = "P1021 MDS",
|
|
.probe = p1021_mds_probe,
|
|
.setup_arch = mpc85xx_mds_setup_arch,
|
|
.init_IRQ = mpc85xx_mds_pic_init,
|
|
.get_irq = mpic_get_irq,
|
|
.restart = fsl_rstcr_restart,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
#ifdef CONFIG_PCI
|
|
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
|
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
|
|
#endif
|
|
};
|
|
|