alistair23-linux/include/linux/crush/crush.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

346 lines
10 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef CEPH_CRUSH_CRUSH_H
#define CEPH_CRUSH_CRUSH_H
#ifdef __KERNEL__
# include <linux/rbtree.h>
# include <linux/types.h>
#else
# include "crush_compat.h"
#endif
/*
* CRUSH is a pseudo-random data distribution algorithm that
* efficiently distributes input values (typically, data objects)
* across a heterogeneous, structured storage cluster.
*
* The algorithm was originally described in detail in this paper
* (although the algorithm has evolved somewhat since then):
*
* http://www.ssrc.ucsc.edu/Papers/weil-sc06.pdf
*
* LGPL2
*/
#define CRUSH_MAGIC 0x00010000ul /* for detecting algorithm revisions */
#define CRUSH_MAX_DEPTH 10 /* max crush hierarchy depth */
#define CRUSH_MAX_RULESET (1<<8) /* max crush ruleset number */
#define CRUSH_MAX_RULES CRUSH_MAX_RULESET /* should be the same as max rulesets */
#define CRUSH_MAX_DEVICE_WEIGHT (100u * 0x10000u)
#define CRUSH_MAX_BUCKET_WEIGHT (65535u * 0x10000u)
#define CRUSH_ITEM_UNDEF 0x7ffffffe /* undefined result (internal use only) */
#define CRUSH_ITEM_NONE 0x7fffffff /* no result */
/*
* CRUSH uses user-defined "rules" to describe how inputs should be
* mapped to devices. A rule consists of sequence of steps to perform
* to generate the set of output devices.
*/
struct crush_rule_step {
__u32 op;
__s32 arg1;
__s32 arg2;
};
/* step op codes */
enum {
CRUSH_RULE_NOOP = 0,
CRUSH_RULE_TAKE = 1, /* arg1 = value to start with */
CRUSH_RULE_CHOOSE_FIRSTN = 2, /* arg1 = num items to pick */
/* arg2 = type */
CRUSH_RULE_CHOOSE_INDEP = 3, /* same */
CRUSH_RULE_EMIT = 4, /* no args */
CRUSH_RULE_CHOOSELEAF_FIRSTN = 6,
CRUSH_RULE_CHOOSELEAF_INDEP = 7,
CRUSH_RULE_SET_CHOOSE_TRIES = 8, /* override choose_total_tries */
CRUSH_RULE_SET_CHOOSELEAF_TRIES = 9, /* override chooseleaf_descend_once */
CRUSH_RULE_SET_CHOOSE_LOCAL_TRIES = 10,
CRUSH_RULE_SET_CHOOSE_LOCAL_FALLBACK_TRIES = 11,
CRUSH_RULE_SET_CHOOSELEAF_VARY_R = 12,
CRUSH_RULE_SET_CHOOSELEAF_STABLE = 13
};
/*
* for specifying choose num (arg1) relative to the max parameter
* passed to do_rule
*/
#define CRUSH_CHOOSE_N 0
#define CRUSH_CHOOSE_N_MINUS(x) (-(x))
/*
* The rule mask is used to describe what the rule is intended for.
* Given a ruleset and size of output set, we search through the
* rule list for a matching rule_mask.
*/
struct crush_rule_mask {
__u8 ruleset;
__u8 type;
__u8 min_size;
__u8 max_size;
};
struct crush_rule {
__u32 len;
struct crush_rule_mask mask;
struct crush_rule_step steps[0];
};
#define crush_rule_size(len) (sizeof(struct crush_rule) + \
(len)*sizeof(struct crush_rule_step))
/*
* A bucket is a named container of other items (either devices or
* other buckets). Items within a bucket are chosen using one of a
* few different algorithms. The table summarizes how the speed of
* each option measures up against mapping stability when items are
* added or removed.
*
* Bucket Alg Speed Additions Removals
* ------------------------------------------------
* uniform O(1) poor poor
* list O(n) optimal poor
* tree O(log n) good good
* straw O(n) better better
* straw2 O(n) optimal optimal
*/
enum {
CRUSH_BUCKET_UNIFORM = 1,
CRUSH_BUCKET_LIST = 2,
CRUSH_BUCKET_TREE = 3,
CRUSH_BUCKET_STRAW = 4,
CRUSH_BUCKET_STRAW2 = 5,
};
extern const char *crush_bucket_alg_name(int alg);
/*
* although tree was a legacy algorithm, it has been buggy, so
* exclude it.
*/
#define CRUSH_LEGACY_ALLOWED_BUCKET_ALGS ( \
(1 << CRUSH_BUCKET_UNIFORM) | \
(1 << CRUSH_BUCKET_LIST) | \
(1 << CRUSH_BUCKET_STRAW))
struct crush_bucket {
__s32 id; /* this'll be negative */
__u16 type; /* non-zero; type=0 is reserved for devices */
__u8 alg; /* one of CRUSH_BUCKET_* */
__u8 hash; /* which hash function to use, CRUSH_HASH_* */
__u32 weight; /* 16-bit fixed point */
__u32 size; /* num items */
__s32 *items;
};
/** @ingroup API
*
* Replacement weights for each item in a bucket. The size of the
* array must be exactly the size of the straw2 bucket, just as the
* item_weights array.
*
*/
struct crush_weight_set {
__u32 *weights; /*!< 16.16 fixed point weights
in the same order as items */
__u32 size; /*!< size of the __weights__ array */
};
/** @ingroup API
*
* Replacement weights and ids for a given straw2 bucket, for
* placement purposes.
*
* When crush_do_rule() chooses the Nth item from a straw2 bucket, the
* replacement weights found at __weight_set[N]__ are used instead of
* the weights from __item_weights__. If __N__ is greater than
* __weight_set_size__, the weights found at __weight_set_size-1__ are
* used instead. For instance if __weight_set__ is:
*
* [ [ 0x10000, 0x20000 ], // position 0
* [ 0x20000, 0x40000 ] ] // position 1
*
* choosing the 0th item will use position 0 weights [ 0x10000, 0x20000 ]
* choosing the 1th item will use position 1 weights [ 0x20000, 0x40000 ]
* choosing the 2th item will use position 1 weights [ 0x20000, 0x40000 ]
* etc.
*
*/
struct crush_choose_arg {
__s32 *ids; /*!< values to use instead of items */
__u32 ids_size; /*!< size of the __ids__ array */
struct crush_weight_set *weight_set; /*!< weight replacements for
a given position */
__u32 weight_set_size; /*!< size of the __weight_set__ array */
};
/** @ingroup API
*
* Replacement weights and ids for each bucket in the crushmap. The
* __size__ of the __args__ array must be exactly the same as the
* __map->max_buckets__.
*
* The __crush_choose_arg__ at index N will be used when choosing
* an item from the bucket __map->buckets[N]__ bucket, provided it
* is a straw2 bucket.
*
*/
struct crush_choose_arg_map {
#ifdef __KERNEL__
struct rb_node node;
s64 choose_args_index;
#endif
struct crush_choose_arg *args; /*!< replacement for each bucket
in the crushmap */
__u32 size; /*!< size of the __args__ array */
};
struct crush_bucket_uniform {
struct crush_bucket h;
__u32 item_weight; /* 16-bit fixed point; all items equally weighted */
};
struct crush_bucket_list {
struct crush_bucket h;
__u32 *item_weights; /* 16-bit fixed point */
__u32 *sum_weights; /* 16-bit fixed point. element i is sum
of weights 0..i, inclusive */
};
struct crush_bucket_tree {
struct crush_bucket h; /* note: h.size is _tree_ size, not number of
actual items */
__u8 num_nodes;
__u32 *node_weights;
};
struct crush_bucket_straw {
struct crush_bucket h;
__u32 *item_weights; /* 16-bit fixed point */
__u32 *straws; /* 16-bit fixed point */
};
struct crush_bucket_straw2 {
struct crush_bucket h;
__u32 *item_weights; /* 16-bit fixed point */
};
/*
* CRUSH map includes all buckets, rules, etc.
*/
struct crush_map {
struct crush_bucket **buckets;
struct crush_rule **rules;
__s32 max_buckets;
__u32 max_rules;
__s32 max_devices;
/* choose local retries before re-descent */
__u32 choose_local_tries;
/* choose local attempts using a fallback permutation before
* re-descent */
__u32 choose_local_fallback_tries;
/* choose attempts before giving up */
__u32 choose_total_tries;
/* attempt chooseleaf inner descent once for firstn mode; on
* reject retry outer descent. Note that this does *not*
* apply to a collision: in that case we will retry as we used
* to. */
__u32 chooseleaf_descend_once;
/* if non-zero, feed r into chooseleaf, bit-shifted right by (r-1)
* bits. a value of 1 is best for new clusters. for legacy clusters
* that want to limit reshuffling, a value of 3 or 4 will make the
* mappings line up a bit better with previous mappings. */
__u8 chooseleaf_vary_r;
/* if true, it makes chooseleaf firstn to return stable results (if
* no local retry) so that data migrations would be optimal when some
* device fails. */
__u8 chooseleaf_stable;
/*
* This value is calculated after decode or construction by
* the builder. It is exposed here (rather than having a
* 'build CRUSH working space' function) so that callers can
* reserve a static buffer, allocate space on the stack, or
* otherwise avoid calling into the heap allocator if they
* want to. The size of the working space depends on the map,
* while the size of the scratch vector passed to the mapper
* depends on the size of the desired result set.
*
* Nothing stops the caller from allocating both in one swell
* foop and passing in two points, though.
*/
size_t working_size;
#ifndef __KERNEL__
/*
* version 0 (original) of straw_calc has various flaws. version 1
* fixes a few of them.
*/
__u8 straw_calc_version;
/*
* allowed bucket algs is a bitmask, here the bit positions
* are CRUSH_BUCKET_*. note that these are *bits* and
* CRUSH_BUCKET_* values are not, so we need to or together (1
* << CRUSH_BUCKET_WHATEVER). The 0th bit is not used to
* minimize confusion (bucket type values start at 1).
*/
__u32 allowed_bucket_algs;
__u32 *choose_tries;
#else
/* CrushWrapper::choose_args */
struct rb_root choose_args;
#endif
};
/* crush.c */
extern int crush_get_bucket_item_weight(const struct crush_bucket *b, int pos);
extern void crush_destroy_bucket_uniform(struct crush_bucket_uniform *b);
extern void crush_destroy_bucket_list(struct crush_bucket_list *b);
extern void crush_destroy_bucket_tree(struct crush_bucket_tree *b);
extern void crush_destroy_bucket_straw(struct crush_bucket_straw *b);
extern void crush_destroy_bucket_straw2(struct crush_bucket_straw2 *b);
extern void crush_destroy_bucket(struct crush_bucket *b);
extern void crush_destroy_rule(struct crush_rule *r);
extern void crush_destroy(struct crush_map *map);
static inline int crush_calc_tree_node(int i)
{
return ((i+1) << 1)-1;
}
/*
* These data structures are private to the CRUSH implementation. They
* are exposed in this header file because builder needs their
* definitions to calculate the total working size.
*
* Moving this out of the crush map allow us to treat the CRUSH map as
* immutable within the mapper and removes the requirement for a CRUSH
* map lock.
*/
struct crush_work_bucket {
__u32 perm_x; /* @x for which *perm is defined */
__u32 perm_n; /* num elements of *perm that are permuted/defined */
__u32 *perm; /* Permutation of the bucket's items */
};
struct crush_work {
struct crush_work_bucket **work; /* Per-bucket working store */
};
#endif