![Linus Torvalds](/assets/img/avatar_default.png)
Core: - Support for packed commands in eMMC 4.5. (This requires a host capability to be turned on. It increases write throughput by 20%+, but may also increase average write latency; more testing needed.) - Add DT bindings for capability flags. - Add mmc_of_parse() for shared DT parsing between drivers. Drivers: - android-goldfish: New MMC driver for the Android Goldfish emulator. - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection. - omap_hsmmc: Fix boot hangs with RPMB partitions. - sdhci-bcm2835: New driver for controller used by Raspberry Pi. - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio. - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs. - tmio_mmc: Add DT bindings, support for vccq regulator. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (GNU/Linux) iQIcBAABAgAGBQJRKmwHAAoJEHNBYZ7TNxYMNBYP/2FZRY33nrnJ0yKeMpyfdH+C LN+33imQudA2t86FlbAOocvcpM12oTPy+DkIbFchWhN1O4lzrqMos8/527QUm9qL cyCnZXrbst/Ttrs3UIbfkKNhA1m4Wau/taNPJ0fWqdmZU4424O774xSOyyB8m9x/ DKuPIs6B9AfVAlS+OM8ZtviIvsJRgC6amZ0mNQZIKGHPm7vCTg6n35tP1ux7ZvJQ 4dMlgqRalV+xN9gNBnCVLOc2eSwEyxIJA2m13LTHGf72pkNvSdYrID87qTJbvXOl Ed7PHuU3+M5bHw7ErCkbi8rmwuSuc8omNt9WK+syGLx4g7v7GceIYHNQudatdN7O gYUWnufT6Om6y+6h9QJ5td4ZZ7i6MhfC1Ps8hJCUjiVn+cLKlEPj0KmLAhZm+6cu wuBdCujeAFu7Z5VcaO2TBLHXXsgggnWbpoq7v6fucCNIleBe598Nu2YJAdbMc+W4 8mONN4ANslTw7CAMrL3C99Ab1WVLZenX38schgDisTkGnI8dr/JCD4OpqAnPSKql qD5KCKRb8O4BMZpQxiFwyTzqYpmNM9RkaIykLxY5y26lgwFI+At9wh1HnhFC4Hl/ ReJ5Cnm8sH19Vgz+5zpZzzS5/aCssObdfFImIfw1wWzwk9A8EHSjAZsVUkzXiVd4 yRwz6eeO3gBMZ+v2humV =dYdW -----END PGP SIGNATURE----- Merge tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.9: Core: - Support for packed commands in eMMC 4.5. (This requires a host capability to be turned on. It increases write throughput by 20%+, but may also increase average write latency; more testing needed.) - Add DT bindings for capability flags. - Add mmc_of_parse() for shared DT parsing between drivers. Drivers: - android-goldfish: New MMC driver for the Android Goldfish emulator. - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection. - omap_hsmmc: Fix boot hangs with RPMB partitions. - sdhci-bcm2835: New driver for controller used by Raspberry Pi. - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio. - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs. - tmio_mmc: Add DT bindings, support for vccq regulator" * tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits) mmc: tegra: assume CONFIG_OF, remove platform data mmc: add DT bindings for more MMC capability flags mmc: tmio: add support for the VccQ regulator mmc: tmio: remove unused and deprecated symbols mmc: sh_mobile_sdhi: use managed resource allocations mmc: sh_mobile_sdhi: remove unused .pdata field mmc: tmio-mmc: parse device-tree bindings mmc: tmio-mmc: define device-tree bindings mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings mmc: (cosmetic) remove "extern" from function declarations mmc: provide a standard MMC device-tree binding parser centrally mmc: detailed definition of CD and WP MMC line polarities in DT mmc: sdhi, tmio: only check flags in tmio-mmc driver proper mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch() mmc: sdhci: check voltage range only on regulators aware of voltage value mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK mmc: support packed write command for eMMC4.5 devices mmc: add packed command feature of eMMC4.5 mmc: rtsx: remove driving adjustment mmc: use regulator_can_change_voltage() instead of regulator_count_voltages ...
929 lines
24 KiB
C
929 lines
24 KiB
C
/* linux/drivers/mmc/host/sdhci-s3c.c
|
|
*
|
|
* Copyright 2008 Openmoko Inc.
|
|
* Copyright 2008 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
* http://armlinux.simtec.co.uk/
|
|
*
|
|
* SDHCI (HSMMC) support for Samsung SoC
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <plat/sdhci.h>
|
|
#include <plat/regs-sdhci.h>
|
|
|
|
#include "sdhci.h"
|
|
|
|
#define MAX_BUS_CLK (4)
|
|
|
|
/* Number of gpio's used is max data bus width + command and clock lines */
|
|
#define NUM_GPIOS(x) (x + 2)
|
|
|
|
/**
|
|
* struct sdhci_s3c - S3C SDHCI instance
|
|
* @host: The SDHCI host created
|
|
* @pdev: The platform device we where created from.
|
|
* @ioarea: The resource created when we claimed the IO area.
|
|
* @pdata: The platform data for this controller.
|
|
* @cur_clk: The index of the current bus clock.
|
|
* @gpios: List of gpio numbers parsed from device tree.
|
|
* @clk_io: The clock for the internal bus interface.
|
|
* @clk_bus: The clocks that are available for the SD/MMC bus clock.
|
|
*/
|
|
struct sdhci_s3c {
|
|
struct sdhci_host *host;
|
|
struct platform_device *pdev;
|
|
struct resource *ioarea;
|
|
struct s3c_sdhci_platdata *pdata;
|
|
unsigned int cur_clk;
|
|
int ext_cd_irq;
|
|
int ext_cd_gpio;
|
|
int *gpios;
|
|
struct pinctrl *pctrl;
|
|
|
|
struct clk *clk_io;
|
|
struct clk *clk_bus[MAX_BUS_CLK];
|
|
};
|
|
|
|
/**
|
|
* struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data
|
|
* @sdhci_quirks: sdhci host specific quirks.
|
|
*
|
|
* Specifies platform specific configuration of sdhci controller.
|
|
* Note: A structure for driver specific platform data is used for future
|
|
* expansion of its usage.
|
|
*/
|
|
struct sdhci_s3c_drv_data {
|
|
unsigned int sdhci_quirks;
|
|
};
|
|
|
|
static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
|
|
{
|
|
return sdhci_priv(host);
|
|
}
|
|
|
|
/**
|
|
* get_curclk - convert ctrl2 register to clock source number
|
|
* @ctrl2: Control2 register value.
|
|
*/
|
|
static u32 get_curclk(u32 ctrl2)
|
|
{
|
|
ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
|
|
ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
|
|
|
|
return ctrl2;
|
|
}
|
|
|
|
static void sdhci_s3c_check_sclk(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
|
|
if (get_curclk(tmp) != ourhost->cur_clk) {
|
|
dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
|
|
|
|
tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
|
|
tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
|
|
writel(tmp, host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
|
|
* @host: The SDHCI host instance.
|
|
*
|
|
* Callback to return the maximum clock rate acheivable by the controller.
|
|
*/
|
|
static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
struct clk *busclk;
|
|
unsigned int rate, max;
|
|
int clk;
|
|
|
|
/* note, a reset will reset the clock source */
|
|
|
|
sdhci_s3c_check_sclk(host);
|
|
|
|
for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
|
|
busclk = ourhost->clk_bus[clk];
|
|
if (!busclk)
|
|
continue;
|
|
|
|
rate = clk_get_rate(busclk);
|
|
if (rate > max)
|
|
max = rate;
|
|
}
|
|
|
|
return max;
|
|
}
|
|
|
|
/**
|
|
* sdhci_s3c_consider_clock - consider one the bus clocks for current setting
|
|
* @ourhost: Our SDHCI instance.
|
|
* @src: The source clock index.
|
|
* @wanted: The clock frequency wanted.
|
|
*/
|
|
static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
|
|
unsigned int src,
|
|
unsigned int wanted)
|
|
{
|
|
unsigned long rate;
|
|
struct clk *clksrc = ourhost->clk_bus[src];
|
|
int div;
|
|
|
|
if (!clksrc)
|
|
return UINT_MAX;
|
|
|
|
/*
|
|
* If controller uses a non-standard clock division, find the best clock
|
|
* speed possible with selected clock source and skip the division.
|
|
*/
|
|
if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
|
|
rate = clk_round_rate(clksrc, wanted);
|
|
return wanted - rate;
|
|
}
|
|
|
|
rate = clk_get_rate(clksrc);
|
|
|
|
for (div = 1; div < 256; div *= 2) {
|
|
if ((rate / div) <= wanted)
|
|
break;
|
|
}
|
|
|
|
dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
|
|
src, rate, wanted, rate / div);
|
|
|
|
return wanted - (rate / div);
|
|
}
|
|
|
|
/**
|
|
* sdhci_s3c_set_clock - callback on clock change
|
|
* @host: The SDHCI host being changed
|
|
* @clock: The clock rate being requested.
|
|
*
|
|
* When the card's clock is going to be changed, look at the new frequency
|
|
* and find the best clock source to go with it.
|
|
*/
|
|
static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
unsigned int best = UINT_MAX;
|
|
unsigned int delta;
|
|
int best_src = 0;
|
|
int src;
|
|
u32 ctrl;
|
|
|
|
/* don't bother if the clock is going off. */
|
|
if (clock == 0)
|
|
return;
|
|
|
|
for (src = 0; src < MAX_BUS_CLK; src++) {
|
|
delta = sdhci_s3c_consider_clock(ourhost, src, clock);
|
|
if (delta < best) {
|
|
best = delta;
|
|
best_src = src;
|
|
}
|
|
}
|
|
|
|
dev_dbg(&ourhost->pdev->dev,
|
|
"selected source %d, clock %d, delta %d\n",
|
|
best_src, clock, best);
|
|
|
|
/* select the new clock source */
|
|
if (ourhost->cur_clk != best_src) {
|
|
struct clk *clk = ourhost->clk_bus[best_src];
|
|
|
|
clk_prepare_enable(clk);
|
|
clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
|
|
|
|
/* turn clock off to card before changing clock source */
|
|
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
|
|
|
|
ourhost->cur_clk = best_src;
|
|
host->max_clk = clk_get_rate(clk);
|
|
|
|
ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
|
|
ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
|
|
writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
}
|
|
|
|
/* reprogram default hardware configuration */
|
|
writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
|
|
host->ioaddr + S3C64XX_SDHCI_CONTROL4);
|
|
|
|
ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
|
|
S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
|
|
S3C_SDHCI_CTRL2_ENFBCLKRX |
|
|
S3C_SDHCI_CTRL2_DFCNT_NONE |
|
|
S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
|
|
writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
|
|
/* reconfigure the controller for new clock rate */
|
|
ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
|
|
if (clock < 25 * 1000000)
|
|
ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
|
|
writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
|
|
}
|
|
|
|
/**
|
|
* sdhci_s3c_get_min_clock - callback to get minimal supported clock value
|
|
* @host: The SDHCI host being queried
|
|
*
|
|
* To init mmc host properly a minimal clock value is needed. For high system
|
|
* bus clock's values the standard formula gives values out of allowed range.
|
|
* The clock still can be set to lower values, if clock source other then
|
|
* system bus is selected.
|
|
*/
|
|
static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
unsigned int delta, min = UINT_MAX;
|
|
int src;
|
|
|
|
for (src = 0; src < MAX_BUS_CLK; src++) {
|
|
delta = sdhci_s3c_consider_clock(ourhost, src, 0);
|
|
if (delta == UINT_MAX)
|
|
continue;
|
|
/* delta is a negative value in this case */
|
|
if (-delta < min)
|
|
min = -delta;
|
|
}
|
|
return min;
|
|
}
|
|
|
|
/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
|
|
static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
|
|
return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], UINT_MAX);
|
|
}
|
|
|
|
/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
|
|
static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
|
|
/*
|
|
* initial clock can be in the frequency range of
|
|
* 100KHz-400KHz, so we set it as max value.
|
|
*/
|
|
return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], 400000);
|
|
}
|
|
|
|
/* sdhci_cmu_set_clock - callback on clock change.*/
|
|
static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
struct device *dev = &ourhost->pdev->dev;
|
|
unsigned long timeout;
|
|
u16 clk = 0;
|
|
|
|
/* don't bother if the clock is going off */
|
|
if (clock == 0)
|
|
return;
|
|
|
|
sdhci_s3c_set_clock(host, clock);
|
|
|
|
clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
|
|
|
|
host->clock = clock;
|
|
|
|
clk = SDHCI_CLOCK_INT_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
|
|
/* Wait max 20 ms */
|
|
timeout = 20;
|
|
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
|
|
& SDHCI_CLOCK_INT_STABLE)) {
|
|
if (timeout == 0) {
|
|
dev_err(dev, "%s: Internal clock never stabilised.\n",
|
|
mmc_hostname(host->mmc));
|
|
return;
|
|
}
|
|
timeout--;
|
|
mdelay(1);
|
|
}
|
|
|
|
clk |= SDHCI_CLOCK_CARD_EN;
|
|
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
|
|
}
|
|
|
|
/**
|
|
* sdhci_s3c_platform_bus_width - support 8bit buswidth
|
|
* @host: The SDHCI host being queried
|
|
* @width: MMC_BUS_WIDTH_ macro for the bus width being requested
|
|
*
|
|
* We have 8-bit width support but is not a v3 controller.
|
|
* So we add platform_bus_width() and support 8bit width.
|
|
*/
|
|
static int sdhci_s3c_platform_bus_width(struct sdhci_host *host, int width)
|
|
{
|
|
u8 ctrl;
|
|
|
|
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
|
|
|
|
switch (width) {
|
|
case MMC_BUS_WIDTH_8:
|
|
ctrl |= SDHCI_CTRL_8BITBUS;
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
ctrl |= SDHCI_CTRL_4BITBUS;
|
|
ctrl &= ~SDHCI_CTRL_8BITBUS;
|
|
break;
|
|
default:
|
|
ctrl &= ~SDHCI_CTRL_4BITBUS;
|
|
ctrl &= ~SDHCI_CTRL_8BITBUS;
|
|
break;
|
|
}
|
|
|
|
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sdhci_ops sdhci_s3c_ops = {
|
|
.get_max_clock = sdhci_s3c_get_max_clk,
|
|
.set_clock = sdhci_s3c_set_clock,
|
|
.get_min_clock = sdhci_s3c_get_min_clock,
|
|
.platform_bus_width = sdhci_s3c_platform_bus_width,
|
|
};
|
|
|
|
static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(dev);
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
struct sdhci_s3c *sc = sdhci_priv(host);
|
|
#endif
|
|
unsigned long flags;
|
|
|
|
if (host) {
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
if (state) {
|
|
dev_dbg(&dev->dev, "card inserted.\n");
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
clk_prepare_enable(sc->clk_io);
|
|
#endif
|
|
host->flags &= ~SDHCI_DEVICE_DEAD;
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
} else {
|
|
dev_dbg(&dev->dev, "card removed.\n");
|
|
host->flags |= SDHCI_DEVICE_DEAD;
|
|
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
clk_disable_unprepare(sc->clk_io);
|
|
#endif
|
|
}
|
|
tasklet_schedule(&host->card_tasklet);
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id)
|
|
{
|
|
struct sdhci_s3c *sc = dev_id;
|
|
int status = gpio_get_value(sc->ext_cd_gpio);
|
|
if (sc->pdata->ext_cd_gpio_invert)
|
|
status = !status;
|
|
sdhci_s3c_notify_change(sc->pdev, status);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
|
|
{
|
|
struct s3c_sdhci_platdata *pdata = sc->pdata;
|
|
struct device *dev = &sc->pdev->dev;
|
|
|
|
if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
|
|
sc->ext_cd_gpio = pdata->ext_cd_gpio;
|
|
sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
|
|
if (sc->ext_cd_irq &&
|
|
request_threaded_irq(sc->ext_cd_irq, NULL,
|
|
sdhci_s3c_gpio_card_detect_thread,
|
|
IRQF_TRIGGER_RISING |
|
|
IRQF_TRIGGER_FALLING |
|
|
IRQF_ONESHOT,
|
|
dev_name(dev), sc) == 0) {
|
|
int status = gpio_get_value(sc->ext_cd_gpio);
|
|
if (pdata->ext_cd_gpio_invert)
|
|
status = !status;
|
|
sdhci_s3c_notify_change(sc->pdev, status);
|
|
} else {
|
|
dev_warn(dev, "cannot request irq for card detect\n");
|
|
sc->ext_cd_irq = 0;
|
|
}
|
|
} else {
|
|
dev_err(dev, "cannot request gpio for card detect\n");
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int sdhci_s3c_parse_dt(struct device *dev,
|
|
struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
|
|
{
|
|
struct device_node *node = dev->of_node;
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
u32 max_width;
|
|
int gpio, cnt, ret;
|
|
|
|
/* if the bus-width property is not specified, assume width as 1 */
|
|
if (of_property_read_u32(node, "bus-width", &max_width))
|
|
max_width = 1;
|
|
pdata->max_width = max_width;
|
|
|
|
ourhost->gpios = devm_kzalloc(dev, NUM_GPIOS(pdata->max_width) *
|
|
sizeof(int), GFP_KERNEL);
|
|
if (!ourhost->gpios)
|
|
return -ENOMEM;
|
|
|
|
/* get the card detection method */
|
|
if (of_get_property(node, "broken-cd", NULL)) {
|
|
pdata->cd_type = S3C_SDHCI_CD_NONE;
|
|
goto setup_bus;
|
|
}
|
|
|
|
if (of_get_property(node, "non-removable", NULL)) {
|
|
pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
|
|
goto setup_bus;
|
|
}
|
|
|
|
gpio = of_get_named_gpio(node, "cd-gpios", 0);
|
|
if (gpio_is_valid(gpio)) {
|
|
pdata->cd_type = S3C_SDHCI_CD_GPIO;
|
|
goto found_cd;
|
|
} else if (gpio != -ENOENT) {
|
|
dev_err(dev, "invalid card detect gpio specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio = of_get_named_gpio(node, "samsung,cd-pinmux-gpio", 0);
|
|
if (gpio_is_valid(gpio)) {
|
|
pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
|
|
goto found_cd;
|
|
} else if (gpio != -ENOENT) {
|
|
dev_err(dev, "invalid card detect gpio specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* assuming internal card detect that will be configured by pinctrl */
|
|
pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
|
|
goto setup_bus;
|
|
|
|
found_cd:
|
|
if (pdata->cd_type == S3C_SDHCI_CD_GPIO) {
|
|
pdata->ext_cd_gpio = gpio;
|
|
ourhost->ext_cd_gpio = -1;
|
|
if (of_get_property(node, "cd-inverted", NULL))
|
|
pdata->ext_cd_gpio_invert = 1;
|
|
} else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
|
|
ret = devm_gpio_request(dev, gpio, "sdhci-cd");
|
|
if (ret) {
|
|
dev_err(dev, "card detect gpio request failed\n");
|
|
return -EINVAL;
|
|
}
|
|
ourhost->ext_cd_gpio = gpio;
|
|
}
|
|
|
|
setup_bus:
|
|
if (!IS_ERR(ourhost->pctrl))
|
|
return 0;
|
|
|
|
/* get the gpios for command, clock and data lines */
|
|
for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
|
|
gpio = of_get_gpio(node, cnt);
|
|
if (!gpio_is_valid(gpio)) {
|
|
dev_err(dev, "invalid gpio[%d]\n", cnt);
|
|
return -EINVAL;
|
|
}
|
|
ourhost->gpios[cnt] = gpio;
|
|
}
|
|
|
|
for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
|
|
ret = devm_gpio_request(dev, ourhost->gpios[cnt], "sdhci-gpio");
|
|
if (ret) {
|
|
dev_err(dev, "gpio[%d] request failed\n", cnt);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int sdhci_s3c_parse_dt(struct device *dev,
|
|
struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
|
|
static const struct of_device_id sdhci_s3c_dt_match[];
|
|
|
|
static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
|
|
struct platform_device *pdev)
|
|
{
|
|
#ifdef CONFIG_OF
|
|
if (pdev->dev.of_node) {
|
|
const struct of_device_id *match;
|
|
match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
|
|
return (struct sdhci_s3c_drv_data *)match->data;
|
|
}
|
|
#endif
|
|
return (struct sdhci_s3c_drv_data *)
|
|
platform_get_device_id(pdev)->driver_data;
|
|
}
|
|
|
|
static int sdhci_s3c_probe(struct platform_device *pdev)
|
|
{
|
|
struct s3c_sdhci_platdata *pdata;
|
|
struct sdhci_s3c_drv_data *drv_data;
|
|
struct device *dev = &pdev->dev;
|
|
struct sdhci_host *host;
|
|
struct sdhci_s3c *sc;
|
|
struct resource *res;
|
|
int ret, irq, ptr, clks;
|
|
|
|
if (!pdev->dev.platform_data && !pdev->dev.of_node) {
|
|
dev_err(dev, "no device data specified\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(dev, "no irq specified\n");
|
|
return irq;
|
|
}
|
|
|
|
host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
|
|
if (IS_ERR(host)) {
|
|
dev_err(dev, "sdhci_alloc_host() failed\n");
|
|
return PTR_ERR(host);
|
|
}
|
|
sc = sdhci_priv(host);
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata) {
|
|
ret = -ENOMEM;
|
|
goto err_pdata_io_clk;
|
|
}
|
|
|
|
sc->pctrl = devm_pinctrl_get_select_default(&pdev->dev);
|
|
|
|
if (pdev->dev.of_node) {
|
|
ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
|
|
if (ret)
|
|
goto err_pdata_io_clk;
|
|
} else {
|
|
memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
|
|
sc->ext_cd_gpio = -1; /* invalid gpio number */
|
|
}
|
|
|
|
drv_data = sdhci_s3c_get_driver_data(pdev);
|
|
|
|
sc->host = host;
|
|
sc->pdev = pdev;
|
|
sc->pdata = pdata;
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
sc->clk_io = clk_get(dev, "hsmmc");
|
|
if (IS_ERR(sc->clk_io)) {
|
|
dev_err(dev, "failed to get io clock\n");
|
|
ret = PTR_ERR(sc->clk_io);
|
|
goto err_pdata_io_clk;
|
|
}
|
|
|
|
/* enable the local io clock and keep it running for the moment. */
|
|
clk_prepare_enable(sc->clk_io);
|
|
|
|
for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
|
|
struct clk *clk;
|
|
char name[14];
|
|
|
|
snprintf(name, 14, "mmc_busclk.%d", ptr);
|
|
clk = clk_get(dev, name);
|
|
if (IS_ERR(clk))
|
|
continue;
|
|
|
|
clks++;
|
|
sc->clk_bus[ptr] = clk;
|
|
|
|
/*
|
|
* save current clock index to know which clock bus
|
|
* is used later in overriding functions.
|
|
*/
|
|
sc->cur_clk = ptr;
|
|
|
|
dev_info(dev, "clock source %d: %s (%ld Hz)\n",
|
|
ptr, name, clk_get_rate(clk));
|
|
}
|
|
|
|
if (clks == 0) {
|
|
dev_err(dev, "failed to find any bus clocks\n");
|
|
ret = -ENOENT;
|
|
goto err_no_busclks;
|
|
}
|
|
|
|
#ifndef CONFIG_PM_RUNTIME
|
|
clk_prepare_enable(sc->clk_bus[sc->cur_clk]);
|
|
#endif
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(host->ioaddr)) {
|
|
ret = PTR_ERR(host->ioaddr);
|
|
goto err_req_regs;
|
|
}
|
|
|
|
/* Ensure we have minimal gpio selected CMD/CLK/Detect */
|
|
if (pdata->cfg_gpio)
|
|
pdata->cfg_gpio(pdev, pdata->max_width);
|
|
|
|
host->hw_name = "samsung-hsmmc";
|
|
host->ops = &sdhci_s3c_ops;
|
|
host->quirks = 0;
|
|
host->irq = irq;
|
|
|
|
/* Setup quirks for the controller */
|
|
host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
|
|
host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
|
|
if (drv_data)
|
|
host->quirks |= drv_data->sdhci_quirks;
|
|
|
|
#ifndef CONFIG_MMC_SDHCI_S3C_DMA
|
|
|
|
/* we currently see overruns on errors, so disable the SDMA
|
|
* support as well. */
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
|
|
|
|
#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
|
|
|
|
/* It seems we do not get an DATA transfer complete on non-busy
|
|
* transfers, not sure if this is a problem with this specific
|
|
* SDHCI block, or a missing configuration that needs to be set. */
|
|
host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
|
|
|
|
/* This host supports the Auto CMD12 */
|
|
host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
|
|
|
|
/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
|
|
|
|
if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
|
|
pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
|
|
if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
|
|
host->mmc->caps = MMC_CAP_NONREMOVABLE;
|
|
|
|
switch (pdata->max_width) {
|
|
case 8:
|
|
host->mmc->caps |= MMC_CAP_8_BIT_DATA;
|
|
case 4:
|
|
host->mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
break;
|
|
}
|
|
|
|
if (pdata->pm_caps)
|
|
host->mmc->pm_caps |= pdata->pm_caps;
|
|
|
|
host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
|
|
SDHCI_QUIRK_32BIT_DMA_SIZE);
|
|
|
|
/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
|
|
host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
|
|
|
|
/*
|
|
* If controller does not have internal clock divider,
|
|
* we can use overriding functions instead of default.
|
|
*/
|
|
if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
|
|
sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
|
|
sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
|
|
sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
|
|
}
|
|
|
|
/* It supports additional host capabilities if needed */
|
|
if (pdata->host_caps)
|
|
host->mmc->caps |= pdata->host_caps;
|
|
|
|
if (pdata->host_caps2)
|
|
host->mmc->caps2 |= pdata->host_caps2;
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_suspend_ignore_children(&pdev->dev, 1);
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret) {
|
|
dev_err(dev, "sdhci_add_host() failed\n");
|
|
pm_runtime_forbid(&pdev->dev);
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
goto err_req_regs;
|
|
}
|
|
|
|
/* The following two methods of card detection might call
|
|
sdhci_s3c_notify_change() immediately, so they can be called
|
|
only after sdhci_add_host(). Setup errors are ignored. */
|
|
if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
|
|
pdata->ext_cd_init(&sdhci_s3c_notify_change);
|
|
if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
|
|
gpio_is_valid(pdata->ext_cd_gpio))
|
|
sdhci_s3c_setup_card_detect_gpio(sc);
|
|
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
|
|
clk_disable_unprepare(sc->clk_io);
|
|
#endif
|
|
return 0;
|
|
|
|
err_req_regs:
|
|
#ifndef CONFIG_PM_RUNTIME
|
|
clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
|
|
#endif
|
|
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
|
|
if (sc->clk_bus[ptr]) {
|
|
clk_put(sc->clk_bus[ptr]);
|
|
}
|
|
}
|
|
|
|
err_no_busclks:
|
|
clk_disable_unprepare(sc->clk_io);
|
|
clk_put(sc->clk_io);
|
|
|
|
err_pdata_io_clk:
|
|
sdhci_free_host(host);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_s3c_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
struct sdhci_s3c *sc = sdhci_priv(host);
|
|
struct s3c_sdhci_platdata *pdata = sc->pdata;
|
|
int ptr;
|
|
|
|
if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
|
|
pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
|
|
|
|
if (sc->ext_cd_irq)
|
|
free_irq(sc->ext_cd_irq, sc);
|
|
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
|
|
clk_prepare_enable(sc->clk_io);
|
|
#endif
|
|
sdhci_remove_host(host, 1);
|
|
|
|
pm_runtime_dont_use_autosuspend(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
#ifndef CONFIG_PM_RUNTIME
|
|
clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
|
|
#endif
|
|
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
|
|
if (sc->clk_bus[ptr]) {
|
|
clk_put(sc->clk_bus[ptr]);
|
|
}
|
|
}
|
|
clk_disable_unprepare(sc->clk_io);
|
|
clk_put(sc->clk_io);
|
|
|
|
sdhci_free_host(host);
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sdhci_s3c_suspend(struct device *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
|
|
return sdhci_suspend_host(host);
|
|
}
|
|
|
|
static int sdhci_s3c_resume(struct device *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
|
|
return sdhci_resume_host(host);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_RUNTIME
|
|
static int sdhci_s3c_runtime_suspend(struct device *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
struct clk *busclk = ourhost->clk_io;
|
|
int ret;
|
|
|
|
ret = sdhci_runtime_suspend_host(host);
|
|
|
|
clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
|
|
clk_disable_unprepare(busclk);
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_s3c_runtime_resume(struct device *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
struct clk *busclk = ourhost->clk_io;
|
|
int ret;
|
|
|
|
clk_prepare_enable(busclk);
|
|
clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
|
|
ret = sdhci_runtime_resume_host(host);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static const struct dev_pm_ops sdhci_s3c_pmops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
|
|
SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
|
|
|
|
#else
|
|
#define SDHCI_S3C_PMOPS NULL
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
|
|
static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
|
|
.sdhci_quirks = SDHCI_QUIRK_NONSTANDARD_CLOCK,
|
|
};
|
|
#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data)
|
|
#else
|
|
#define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)NULL)
|
|
#endif
|
|
|
|
static struct platform_device_id sdhci_s3c_driver_ids[] = {
|
|
{
|
|
.name = "s3c-sdhci",
|
|
.driver_data = (kernel_ulong_t)NULL,
|
|
}, {
|
|
.name = "exynos4-sdhci",
|
|
.driver_data = EXYNOS4_SDHCI_DRV_DATA,
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id sdhci_s3c_dt_match[] = {
|
|
{ .compatible = "samsung,s3c6410-sdhci", },
|
|
{ .compatible = "samsung,exynos4210-sdhci",
|
|
.data = (void *)EXYNOS4_SDHCI_DRV_DATA },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
|
|
#endif
|
|
|
|
static struct platform_driver sdhci_s3c_driver = {
|
|
.probe = sdhci_s3c_probe,
|
|
.remove = sdhci_s3c_remove,
|
|
.id_table = sdhci_s3c_driver_ids,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "s3c-sdhci",
|
|
.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
|
|
.pm = SDHCI_S3C_PMOPS,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sdhci_s3c_driver);
|
|
|
|
MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
|
|
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:s3c-sdhci");
|