redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/boot/dts/imx53.dtsi
Marek Vasut e37f0d5b32 ARM: mx5: Fix MX53 flexcan2 clock 
The second FlexCAN port uses different clock than the first one, configure
correct clock to prevent hanging of the system during bringing up of the port.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-08 08:53:07 +08:00

669 lines
17 KiB
Plaintext
Raw Blame History

/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/include/ "skeleton.dtsi"
/ {
aliases {
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
};
tzic: tz-interrupt-controller@0fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x0fffc000 0x4000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&tzic>;
ranges;
ipu: ipu@18000000 {
#crtc-cells = <1>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
};
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x10000000>;
ranges;
spba@50000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x40000>;
ranges;
esdhc1: esdhc@50004000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks 44>, <&clks 0>, <&clks 71>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
esdhc2: esdhc@50008000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
uart3: serial@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
clocks = <&clks 32>, <&clks 33>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi1: ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks 51>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
ssi2: ssi@50014000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks 49>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
esdhc3: esdhc@50020000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
esdhc4: esdhc@50024000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
};
usbotg: usb@53f80000 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
status = "disabled";
};
usbh1: usb@53f80200 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
status = "disabled";
};
usbh2: usb@53f80400 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
status = "disabled";
};
usbh3: usb@53f80600 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
status = "disabled";
};
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f84000 0x4000>;
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@53f88000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f88000 0x4000>;
interrupts = <52 53>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@53f8c000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f8c000 0x4000>;
interrupts = <54 55>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@53f90000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f90000 0x4000>;
interrupts = <56 57>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
wdog1: wdog@53f98000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
clocks = <&clks 0>;
};
wdog2: wdog@53f9c000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
clocks = <&clks 0>;
status = "disabled";
};
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
audmux {
pinctrl_audmux_1: audmuxgrp-1 {
fsl,pins = <
10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */
17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */
23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */
30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */
>;
};
};
fec {
pinctrl_fec_1: fecgrp-1 {
fsl,pins = <
820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */
779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */
786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */
791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */
796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */
799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */
804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */
808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */
811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */
816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */
>;
};
};
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <
433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */
439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */
445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */
>;
};
};
esdhc1 {
pinctrl_esdhc1_1: esdhc1grp-1 {
fsl,pins = <
995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
>;
};
pinctrl_esdhc1_2: esdhc1grp-2 {
fsl,pins = <
995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */
1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */
1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */
1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */
941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */
948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */
955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */
962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */
1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */
1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */
>;
};
};
esdhc2 {
pinctrl_esdhc2_1: esdhc2grp-1 {
fsl,pins = <
1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */
1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */
1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */
1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */
1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */
1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */
>;
};
};
esdhc3 {
pinctrl_esdhc3_1: esdhc3grp-1 {
fsl,pins = <
943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */
950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */
957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */
964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */
893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */
900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */
906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */
912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */
857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */
863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */
>;
};
};
can1 {
pinctrl_can1_1: can1grp-1 {
fsl,pins = <
847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
>;
};
};
can2 {
pinctrl_can2_1: can2grp-1 {
fsl,pins = <
67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
>;
};
};
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <
333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */
341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */
>;
};
};
i2c2 {
pinctrl_i2c2_1: i2c2grp-1 {
fsl,pins = <
61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */
53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */
>;
};
};
i2c3 {
pinctrl_i2c3_1: i2c3grp-1 {
fsl,pins = <
1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */
1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */
>;
};
};
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */
354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */
>;
};
pinctrl_uart1_2: uart1grp-2 {
fsl,pins = <
828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */
832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */
>;
};
};
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */
836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */
>;
};
};
uart3 {
pinctrl_uart3_1: uart3grp-1 {
fsl,pins = <
884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */
888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */
875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */
880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */
>;
};
};
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
>;
};
};
uart5 {
pinctrl_uart5_1: uart5grp-1 {
fsl,pins = <
24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
>;
};
};
};
pwm1: pwm@53fb4000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
clocks = <&clks 37>, <&clks 38>;
clock-names = "ipg", "per";
interrupts = <61>;
};
pwm2: pwm@53fb8000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
clocks = <&clks 39>, <&clks 40>;
clock-names = "ipg", "per";
interrupts = <94>;
};
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks 28>, <&clks 29>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks 30>, <&clks 31>;
clock-names = "ipg", "per";
status = "disabled";
};
can1: can@53fc8000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks 158>, <&clks 157>;
clock-names = "ipg", "per";
status = "disabled";
};
can2: can@53fcc000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
clocks = <&clks 87>, <&clks 86>;
clock-names = "ipg", "per";
status = "disabled";
};
clks: ccm@53fd4000{
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
interrupts = <103 104>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@53fe0000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fe0000 0x4000>;
interrupts = <105 106>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio7: gpio@53fe4000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fe4000 0x4000>;
interrupts = <107 108>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2c3: i2c@53fec000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
clocks = <&clks 88>;
status = "disabled";
};
uart4: serial@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
clocks = <&clks 65>, <&clks 66>;
clock-names = "ipg", "per";
status = "disabled";
};
};
aips@60000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x60000000 0x10000000>;
ranges;
uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
clocks = <&clks 67>, <&clks 68>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks 53>, <&clks 54>;
clock-names = "ipg", "per";
status = "disabled";
};
sdma: sdma@63fb0000 {
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks 56>, <&clks 56>;
clock-names = "ipg", "ahb";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
cspi: cspi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks 55>, <&clks 0>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c2: i2c@63fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
clocks = <&clks 35>;
status = "disabled";
};
i2c1: i2c@63fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
clocks = <&clks 34>;
status = "disabled";
};
ssi1: ssi@63fcc000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks 48>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
audmux: audmux@63fd0000 {
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
reg = <0x63fd0000 0x4000>;
status = "disabled";
};
nfc: nand@63fdb000 {
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
clocks = <&clks 60>;
status = "disabled";
};
ssi3: ssi@63fe8000 {
compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks 50>;
fsl,fifo-depth = <15>;
fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
status = "disabled";
};
fec: ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
clocks = <&clks 42>, <&clks 42>, <&clks 42>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
};
};
View git blame Copy permalink