alistair23-linux/drivers/mfd/lpc_sch.c
Darren Hart 5829e9b64e mfd: lpc_sch: Accomodate partial population of the MFD devices
The current probe aborts if any of the 3 base address registers are
disabled. On a TunnelCreek system I am working on, this resulted in the
SMBIOS and GPIO devices being removed when it couldn't read the base
address for the watchdog timer.

This patch accommodates partial population of the lpc_sch_cells array and
only aborts if all the base address registers are disabled. A max size
array is allocated and the individual device cells are added to it after
their base addresses are successfully determined. This simplifies the
code a bit by removing the need for the separate tunnelcreek cells array
and combining some of the add/remove logic.

Cc: Grant Likely <grant.likely@secretlab.ca>,
Cc: Denis Turischev <denis@compulab.co.il>,
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:26:45 +01:00

179 lines
4.8 KiB
C

/*
* lpc_sch.c - LPC interface for Intel Poulsbo SCH
*
* LPC bridge function of the Intel SCH contains many other
* functional units, such as Interrupt controllers, Timers,
* Power Management, System Management, GPIO, RTC, and LPC
* Configuration Registers.
*
* Copyright (c) 2010 CompuLab Ltd
* Author: Denis Turischev <denis@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/acpi.h>
#include <linux/pci.h>
#include <linux/mfd/core.h>
#define SMBASE 0x40
#define SMBUS_IO_SIZE 64
#define GPIOBASE 0x44
#define GPIO_IO_SIZE 64
#define GPIO_IO_SIZE_CENTERTON 128
#define WDTBASE 0x84
#define WDT_IO_SIZE 64
static struct resource smbus_sch_resource = {
.flags = IORESOURCE_IO,
};
static struct resource gpio_sch_resource = {
.flags = IORESOURCE_IO,
};
static struct resource wdt_sch_resource = {
.flags = IORESOURCE_IO,
};
static struct mfd_cell lpc_sch_cells[3];
static struct mfd_cell isch_smbus_cell = {
.name = "isch_smbus",
.num_resources = 1,
.resources = &smbus_sch_resource,
};
static struct mfd_cell sch_gpio_cell = {
.name = "sch_gpio",
.num_resources = 1,
.resources = &gpio_sch_resource,
};
static struct mfd_cell wdt_sch_cell = {
.name = "ie6xx_wdt",
.num_resources = 1,
.resources = &wdt_sch_resource,
};
static DEFINE_PCI_DEVICE_TABLE(lpc_sch_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, lpc_sch_ids);
static int lpc_sch_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
unsigned int base_addr_cfg;
unsigned short base_addr;
int i, cells = 0;
int ret;
pci_read_config_dword(dev, SMBASE, &base_addr_cfg);
base_addr = 0;
if (!(base_addr_cfg & (1 << 31)))
dev_warn(&dev->dev, "Decode of the SMBus I/O range disabled\n");
else
base_addr = (unsigned short)base_addr_cfg;
if (base_addr == 0) {
dev_warn(&dev->dev, "I/O space for SMBus uninitialized\n");
} else {
lpc_sch_cells[cells++] = isch_smbus_cell;
smbus_sch_resource.start = base_addr;
smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1;
}
pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg);
base_addr = 0;
if (!(base_addr_cfg & (1 << 31)))
dev_warn(&dev->dev, "Decode of the GPIO I/O range disabled\n");
else
base_addr = (unsigned short)base_addr_cfg;
if (base_addr == 0) {
dev_warn(&dev->dev, "I/O space for GPIO uninitialized\n");
} else {
lpc_sch_cells[cells++] = sch_gpio_cell;
gpio_sch_resource.start = base_addr;
if (id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB)
gpio_sch_resource.end = base_addr + GPIO_IO_SIZE_CENTERTON - 1;
else
gpio_sch_resource.end = base_addr + GPIO_IO_SIZE - 1;
}
if (id->device == PCI_DEVICE_ID_INTEL_ITC_LPC
|| id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) {
pci_read_config_dword(dev, WDTBASE, &base_addr_cfg);
base_addr = 0;
if (!(base_addr_cfg & (1 << 31)))
dev_warn(&dev->dev, "Decode of the WDT I/O range disabled\n");
else
base_addr = (unsigned short)base_addr_cfg;
if (base_addr == 0)
dev_warn(&dev->dev, "I/O space for WDT uninitialized\n");
else {
lpc_sch_cells[cells++] = wdt_sch_cell;
wdt_sch_resource.start = base_addr;
wdt_sch_resource.end = base_addr + WDT_IO_SIZE - 1;
}
}
if (WARN_ON(cells > ARRAY_SIZE(lpc_sch_cells))) {
dev_err(&dev->dev, "Cell count exceeds array size");
return -ENODEV;
}
if (cells == 0) {
dev_err(&dev->dev, "All decode registers disabled.\n");
return -ENODEV;
}
for (i = 0; i < cells; i++)
lpc_sch_cells[i].id = id->device;
ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
if (ret)
mfd_remove_devices(&dev->dev);
return ret;
}
static void lpc_sch_remove(struct pci_dev *dev)
{
mfd_remove_devices(&dev->dev);
}
static struct pci_driver lpc_sch_driver = {
.name = "lpc_sch",
.id_table = lpc_sch_ids,
.probe = lpc_sch_probe,
.remove = lpc_sch_remove,
};
module_pci_driver(lpc_sch_driver);
MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
MODULE_DESCRIPTION("LPC interface for Intel Poulsbo SCH");
MODULE_LICENSE("GPL");